Transcript
PLD-22-40W-XX
Type
LED COMMERCIAL LIGHTING 2X2 EDGE LIT DIMMING LED FLAT PANEL
Project Catalog No.
SPECIFICATIONS
DIMENSIONS: 23 3/4” X 23 3/4”
Description
2x2 Edge Lit LED Panel
Input Voltage
Universal 100-277 VAC
Wattage
40W
CCT (+/-5%)
3500K
4000K
5000K
Lumens (+/-10%)
4200 lm
4400 lm
4600 lm
Efficacy
105 lm/W
110 lm/W
115 lm/W
CRI
80+
Power Factor
>0.9
Dimming
0-10V: 10% to 100%
Operating Temperature*
-20°C to +40°C*
Dimensions
See Diagram
Environment
Indoor – Dry. IC Rated.
Certifications
Warranty
5 Years – see published warranty terms for detailed information.
Exceeding the operating temperature values may damage the LEDs by reducing the lifespan, lumen output, and/or adversely impact color consistency. Improper thermal management may lead to premature product failure and void the warranty. *Operating over 35°C is not recommended
DESCRIPTION JESCO’s RELYENCE Series 2’x2’ LED panel light provides an easy and cost effective solution to traditional fluorescent troffers; The thin and lightweight edge lit design easily lays into drop ceilings. The LED and flat panel combination provides an energy efficient luminaire (up to 45% savings over traditional fluorescent) with no shadows or dark spots, meeting the new higher performance DLC Premium. Measuring at 1.18” in height, there is no need to worry about unforeseen obstacles in the ceiling. Available in 3500K (warm white), 4000K (natural white) and 5000K (cool white) color temperatures, this high performance fixture offers an efficacy of up to 115 lumens per watt and a universal input driver (100-277VAC). The fixture is UL listed, DLC Premium qualified and meets FCC requirements. Dimming is achieved by using 0-10V dimmer.
FEATURES • • • • • • • • • •
Efficient, edge-lit and glare free design 4600 lm from 40 W (5000K) Efficacy up to 115 lm/W (5000K) 3500K, 4000K and 5000K color temperatures CRI > 80 Universal input voltage 100-277 VAC 120° beam Angle L70>50,000 hours 0-10V dimming 10%-100% Extruded Aluminum Frame with Translucent diffuser
www.jescolighting.com
[email protected] Tech Support: 855.592.0029
• • • • • • •
Fits standard T-Bar Fixture is IC-rated for contact with insulation after installation Six 7/8” knockouts provided Ultra-thin – 1.18” 2x4 version available Mounting options – surface mount (ELP-22-SMK) and suspension kits (ELP-22-SCK) Optional Emergency battery provides emergency lighting for 90 minutes
15 Harbor Park Drive Port Washington, NY 11050 Main Line: 800.527.7796 Fax Line: 855.265.5768 Specifications subject to change without notice.
219 South 6th Ave City of Industry, CA 91746 Main Line: 855.654.0110 Fax Line: 626.333.2955
4/3/2017 Page 1 of 3
PLD-22-40W-XX
Type Project
LED COMMERCIAL LIGHTING 2X2 EDGE LIT DIMMING LED FLAT PANEL
Catalog No.
ORDERING INFORMATION MODEL PLD
-
SIZE 22 22-2’x2’
-
WATTAGE 40W 40W-40 Watts
CCT
EMERGENCY BATTERY OPTION* -
35-3500K 40-4000K 50-5000K
EM – Emergency Battery Option
Example: PLD-22-40W-35-EM *Consult Factory
LUMINOUS INTENSITY DISTRIBUTION DIAGRAM
CONE ILLUMINANCE DIAGRAM
*Above photometric data based on 4000K CCT
www.jescolighting.com
[email protected] Tech Support: 855.592.0029
15 Harbor Park Drive Port Washington, NY 11050 Main Line: 800.527.7796 Fax Line: 855.265.5768 Specifications subject to change without notice.
219 South 6th Ave City of Industry, CA 91746 Main Line: 855.654.0110 Fax Line: 626.333.2955
4/3/2017 Page 2 of 3
PLD-22-40W-XX
Type
LED COMMERCIAL LIGHTING 2X2 EDGE LIT DIMMING LED FLAT PANEL
Project Catalog No.
AVAILABLE MOUNTING OPTIONS (SOLD SEPARATELY) Suspension Cable Kit
Surface Mount Kit
ELP-22-SCK Requires assembly (Consists of 2 Aircraft cables and hardware) Hanging length is 57.5” (nominal) ELP-22-SMK Requires assembly (Consists of 4 sides and hardware)
www.jescolighting.com
[email protected] Tech Support: 855.592.0029
15 Harbor Park Drive Port Washington, NY 11050 Main Line: 800.527.7796 Fax Line: 855.265.5768 Specifications subject to change without notice.
219 South 6th Ave City of Industry, CA 91746 Main Line: 855.654.0110 Fax Line: 626.333.2955
4/3/2017 Page 3 of 3
