Transcript
Getting Ready Using the Camera Advanced Features
• Photography • Playback
OWNER’S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S5 Pro correctly. Please follow the instructions carefully.
Settings Camera Connection Software Installation Appendices Troubleshooting
BL00577-201(1)
U SET UP
How to use the SET UP menu (➝p.138)
SHOOTING IMAGE COMMENT
Z Manually enter a comment
1
Activate [IMAGE COMMENT]. IMAGE COMMENT
User comment of up to 45 characters (EXIF) can be entered when [TYPE IN/BARCODE] is set. [TYPE IN/BARCODE] Manually enter or edit a comment of up to 45 characters (EXIF) by using the [INPUT COMMENT] screen (➝p.147). Data read using the [OFF/BCD MULTI READ] will be erased. The maximum number of characters is 45 when reading a barcode with the [BCR 1 SHOT] or [BCR CONTINUOUS] selected under [BARCODE READER/ GPS]. In this case, the comment will be overwritten at each barcode reading. [OFF/BARCODE] A comment manually entered by using the [INPUT COMMENT] screen will not be recorded when [OFF/ BARCODE] is set (➝p.147). The maximum number of characters is 45 when reading a barcode with the [BCR 1 SHOT] or [BCR CONTINUOUS] selected under [BARCODE READER/ GPS]. In this case, the comment will be overwritten at each barcode reading. [OFF/BCD MULTI READ] A comment manually entered by using the [INPUT COMMENT] screen will be erased when [OFF/BCD MULTI READ] is set (➝p.147). The maximum number of characters is 248 when reading barcodes. Separate comments with comma (,) semicolon (;) or ampersand (&) when reading multiple barcodes.
146
TYPE IN/BARCODE OFF/BARCODE OFF/BCD MULTI READ
A Press n or o to select [TYPE IN/ BARCODE].
B Press q.
MEMO • If [TYPE IN/BARCODE] is selected, a comment is added to all photographs taken. • To not add a comment, select [OFF/BARCODE] or [OFF/BCD MULTI READ].
How to use the SET UP menu (➝p.138)
2
BARCODE READER/GPS
Enter a comment.
Store information from a barcode reader or GPS connected to a 10-pin terminal as Exif information.
INPUT COMMENT
1234567890_ABCDEFGHIJKLMNOP QRSTUVWXYZ!"#$%&'()*+,->/:;< =>?@[]{} DONE
DELETE
INSERT
A Rotate the main-command dial to display the desired first letter to enter.
MEMO • Repeat the steps A-B to enter more letters. • Press p or q to select the letter to delete, then press n to delete. • To insert a letter between other letters, press p or q to select the letter after the inserting position, then press o to insert.
3
Exit from [IMAGE COMMENT]. Press MENU/OK.
Settings
B Press q to enter the second letter.
[BCR 1 SHOT] Read barcode information for each shot and store it as comment information. Pictures cannot be taken without reading a new barcode. [BCR CONTINUOUS] Store registered barcode information as comment information in every file. To erase the registered information, read the “barcode eraser” on this page or delete the letters registered in the [IMAGE COMMENT]. [GPS] Store information from GPS device allowing latitude, longitude, altitude and UTC (standard universal coordinated time) to be recorded with photographs. [OFF] No store barcord or GPS information is retrieved. MEMO • When the barcode information is stored, BCD is displayed in the control panel. • The following ASCII characters can be used for the barcode information: (space), 0~9, _(under bar), A~Z (lower-case characters can be entered using barcode reader, however they cannot be reviewed or edited on the [INPUT COMMENT] screen.), ! ” # $ % & ’ ( ) * + - . / : ; < = > ? @ [ ] { }. Usable types of barcode depend on the specifications of the barcode reader.
Continued Q 147
How to use the SET UP menu (➝p.138)
FUNCTION LOCK To avoid mis-use, lock the functions of the command dial, [SHOOTING MENU] and [SET UP] menu. [LOCK SETTING] Select [ALL FUNCTION], [SELECTED FUNCTION], or [BASIC FUNCTION] for the [LOCK SETTING]. UNLOCK
Releases the lock for functions.
ALL FUNCTION
Locks the fucntions which can be locked in [BASIC FUNCTION] and the functions which can be specified in [SELECTED FUNCTION].
BASIC FUNCTION
Locks the specified functions. To specify the functions, use [FUNCTION SELECTION]. The functions locked by the [BASIC FUNCTION] will also be locked when the [SELECTED FUNCTION] is set. Locks all functions except the functions which can be specified by the [SELECTED FUNCTION].
[FUNCTION SELECTION] Specifies functions to be locked when [SELECTED FUNCTION] is selected for [LOCK SETTING]. [CHANGE PASSWORD] Change password when [LOCK SETTING] activates.
• • • • • • • • •
FORMAT ERASE APERTURE SHUTTER SPEED EXP.COMPENSATION TONE/COLOR/SHARP D-RANGE COLOR SPACES FILM SIMULATION
• • • • • • • • •
QUALITY WHITE BALANCE ISO NOISE REDUCTION EXPOSURE MODE FLASH COMPENSATION MAINTENANCE DATE/TIME-TIME DIF FILE TAG OPTIONS
The functions to be locked by the [BASIC FUNCTION] • All options in the [SET UP] menu (except [FUNCTION LOCK], [FORMAT]). • Auto bracketing • Two-button reset
Settings
SELECTED FUNCTION
These functions can be specified by the [SELECTED FUNCTION]
MEMO • The following functions can be used even when [FUNCTION LOCK] is set. - Playback (w, ) - Release (AF-ON button, AE-L/AF-L button) • Specify the functions using [FUNCTION SELECTION] before setting the [SELECTED FUNCTION] under [LOCK SETTING] (➝p.170).
Continued Q
169
