Transcript
ICC-ES Report
PMG-1332 Reissued 12/2016 This report is subject to renewal 12/2017
EVALUATION SUBJECT:
MULTI-PANEL XPS TILEABLE SHOWER RECEPTORS AND DRAINS DIVISION: 22 00 00—PLUMBING SECTION: 22 40 00—PLUMBING FIXTURES (SHOWER RECEPTORS)
Report Holder:
MULTI-PANELS CORPORATION 7825 FAY AVENUE, SUITE 200 LA JOLLA, CA 92037
PMG-1332
ICC-ES PMG Listing
Effective Date: December 2016 This listing is subject to re-examination in one year. www.icc-es-pmg.org | (800) 423-6587 | (562) 699-0543 CSI:
A Subsidiary of the International Code Council®
DIVISION: 22 00 00—PLUMBING Section: 22 40 00—Plumbing Fixtures (Shower Receptors)
Product certification system: The ICC-ES product certification system includes testing samples taken from the market or supplier’s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier’s quality system. Product:
Multi-Panel XPS Tileable Shower Receptors and Drains
Listee:
Multi-Panels Corporation 7825 Fay Ave., Ste 200 La Jolla, CA 92037-4270 www.multi-panels.com
Compliance with the following codes: 2015, 2012 and 2009 International Residential Code® (IRC) 2015, 2012 and 2009 International Plumbing Code® (IPC) 2015, 2012 and 2009 Uniform Plumbing Code® (UPC)* 2015, 2010 and 2005 National Plumbing Code of Canada (NPC)** *Copyrighted publication of the International Association of Plumbing and Mechanical Officials ** Copyrighted publication of the National Research Council Canada
Compliance with the following standard: ANSI A118.10-2014, Load-Bearing, Bonded, Waterproof Membrane for Thin-set Ceramic Tile and Dimension Stone Installation IAPMO PS 106-2015e1, Tileable Shower Receptors and Shower Kits ASME A112.6.3-2016, Floor and Trench Drains Identification: Each model shall be clearly labelled. The label shall include at a minimum the manufacturer’s name or trademark as well as the ICC-ES PMG certification mark. Installation: Models listed on this report shall be installed in accordance with the manufacturer’s published instructions and the applicable code(s). When provided, ceramic tile must comply with ANSI A137.1. When provided, drains complied with ASME A112.6.3. Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright © 2016 ICC Evaluation Service, LLC. All rights reserved.
Page 1 of 2
PMG-1336 | Most Widely Accepted and Trusted
Page 2 of 2
Models: The Multi-Panel XPS Shower Trays are pre-sloped, ready-to-tile floor units. The Multi-Panel XPS Tile Backer Panels are engineered as a general purpose backer board and underlayment for tile and consisting of a CFC-free, closed cell core made from extruded polystyrene rigid form and covered on both sides with a synthetic polymer resin and MgO mortar and reinforcing fiberglass mesh for bonding with any type of thinset mortar. The systems drain is integrated and factory sealed into the shower tray. System assembly and Multi-Panel XPS components were proven to be waterproof, waterresistant, and mold resistant when tested in accordance with A118.10 Model No.
Description Size
ST800/C/O ST900/C/O ST1000/C/O ST1200/O ST1400/O ST1800/O CB00624 CB00625 CB01228 CB01225 CB01235 CB01248 CB02028 CB03028 CB04028 CB05028 L150 L200 L300 L400 U120 U200 SB30L SB40L SB50L SB40W SB50W SDH2 SDV2
800 x 800 x 20/40mm Shower Tray 900 x 900 x 20/40mm Shower Tray 1000 x 1000 x 20/40mm Shower Tray 900 x 1200 x 20/40mm Shower Tray 1000 x 1400 x 20/40mm Shower Tray 900x1800x20/40mm Shower Tray 2’ x 4’ x 1/4” (600 x 1250 x 6 mm) Tile Backer Board 2’ x 5’ x 1/4” (600 x 1524 x 6 mm) Tile Backer Board 2’ x 8’ x 1/2” (600 x 2500 x 12.7 mm) Tile Backer Board 2’ x 5’ x 1/2” (600 x 1524 x 12.7 mm) Tile Backer Board 3’ x 5’ x 1/2” (914 x 1524 x 12.7 mm) Tile Backer Board 4’ x 8’ x 1/2” (1200 x 2500 x 12.7 mm) Tile Backer Board 2’ x 8’ x 3/4” (600 x 2500 x 20 mm) Tile Backer Board 2’ x 8’ x 1 1/4” (600 x 2500 x 30 mm) Tile Backer Board 2’ x 8’ x 1 1/2” (600 x 2500 x 40 mm) Tile Backer Board 2’ x 8’ x 2” (600 x 2500 x 50 mm) Tile Backer Board 150 x 150 x 2500 x 20 mm = (3/4”) L Shape Board 200 x 200 x 2500 x 20 mm L Shape Board 300 x 300 x 2500 x 20 mm L Shape Board 400 x 400 x 2500 x 20 mm L Shape Board 80 x 120 x 80 x 2500 x 20 mm U Shape Board 200 x 200 x 200 x 2500 x 20 mm U Shape Board 600x2500x30 mm (1 ¼”) Shapeable Board 600x2500x40 mm (1 ½”) Shapeable Board 600x2500x50 mm (2”) Shapeable Board 600x2500x40 mm Shapeable Board 600x2500x50 mm Shapeable Board 4”X 4” Square Strainer Shower Drain, horisontl Outlet Spigot type 4”X 4” Square Strainer Shower Drain, vertical Outlet Spigot type
Shower system may include the following components: shower tray, tile backer board, L & U shape boards, shapeable boards, shower drain, cover plates, and waterproof sealing tape. Manufacturer’s recommended fasteners and joint sealant shall be acquired from a local hardware supplier. Conditions of Listing: 1. Models listed shall be installed in accordance with the manufacturer’s installation instructions and the applicable code(s). 2. Products are distributed by Multi-Panels, in La Jolla, California under a quality control program with annual surveillance inspections by ICC-ES.
