Transcript
PMK-V15
Pre-Construction Mounting Kit for V15-WALL, TPMC-V15-WALL and WMKCV15 The PMK-V15 mounting kit provides a simple solution for installing the V15-WALL V-Panel? 15" Wall Mount Touchpanel Display, or the TPMC-V15-WALL V-Panel Integrated 15" Wall Mount Touchpanel. It is also compatible with the WMKC-V15 Wall Mount Conversion Kit. Designed for pre-construction applications, the PMK-V15 permits fastening to the studs of a framed wall prior to installation of sheet rock. A blank cover plate is included to provide a temporary cover of the opening during construction. Please note, this mounting kit requires a stud spacing of 17 1/2 inches O.C. (445 mm O.C.) and an inside width of 16 inches (407 mm) behind the wall surface. Consult the installation manual for actual cutout dimensions, clearances, and complete mounting instructions.
SPECIFICATIONS Dimensions
Height: 14.00 in (356 mm) Width: 19.00 in (483 mm) Note: Consult the installation manual for actual cutout dimensions, clearances, and complete mounting instructions. Available Models PMK-V15 [6503028]: Pre-Construction Mounting Kit for V15-WALL, TPMC-V15WALL and WMKC-V15 [Discontinued] Available Accessories MMK-V15 [6503508]: Mud Ring for BB-V15 and PMK-V15 [Discontinued]
www.crestron.com
800.237.2041
PMK-V15
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905 www.crestron.com
All brand names, product names and trademarks are the property of their respective owners. ©2016 Crestron Electronics, Inc. | 15 Volvo Drive | Rockleigh, NJ 07647 Specifications subject to change without notice. 5/3/2016
