Transcript
S8T | S10T | S12
AcousticDesign™ Series S8T | S10T | S12 Small format, surface mount loudspeakers S8T Features • Patent pending X-Mount™ enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time • DMT™ (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area • Low saturation 70/100V transformers with 8 ohm bypass (S8T and S10T only) • Euroblock connectors allows prewiring of the system • Lightweight ABS enclosures offer long-term durability and lasting good looks • Sealed input panel cover and powder coated aluminum grilles for added weather resistance • Meets IEC60529 IP-54 for dust and splash resistance • Available in black (RAL 9011) or white (RAL 9010) • Optional yoke mount and M10 Kit-C eyebolt kit offers additional loudspeaker deployment options • Complete EASE, CAD & BIM information available online
S12
S10T
Restaurant / Retail ∙ Audio Visual ∙ Education ∙ Healthcare Facilities ∙ Casinos ∙ Office ∙ Worship Facilities ∙ Ancillary Support in Larger Systems QSC’s AcousticDesign™ S8T, S10T and S12 surface mount loudspeakers are professional, 70/100V, two-way, fullrange systems ideal for a wide variety of foreground and background sound reinforcement applications. Ease-ofinstallation is the driving principle behind QSC’s next generation of small format, surface mount loudspeakers. Innovations found on these new AD-S loudspeakers enable designers and integrators to quickly and easily specify and install a system. AD-S loudspeakers are also a perfect solution to serve ancillary loudspeaker needs as part of a larger installed sound system. Housed in rugged ABS enclosures for long-term durability, S8T, S10T and S12 loudspeakers employ DMT™ (Directivity Matched Transition) which matches the LF and HF coverage at the crossover point. This ensures even coverage across the listening plane for smooth, coherent audio reproduction. The 1.4in diaphragm, 1in exit compression driver on the S8T, S10T and S12 delivers crisp, detailed highfrequency reproduction and when combined with the matched woofers, provides full bandwidth reproduction. To further enhance performance, tunings using QSC Intrinsic Correction techniques are available for Q-Sys and future QSC amplifiers. Moreover, the low saturation transformers (S8T and S10T only) offer premium performance on 70/100V distributed audio lines. Installers will appreciate the flexible mounting options. Euroblock connectors allow pre-wiring of the system and the
included X-Mount™ hardware enables the installer to mount the bracket and then simply lift the loudspeaker onto the mount and lock it into place. The loudspeaker can attach to its mount on any plane (vertically or horizontally) to facilitate multiple deployment configurations. AD-S loudspeakers can easily be mounted to any weight bearing, flat surface. Knurled surfaces on the mount’s pivot points ensure that the loudspeaker deployment angle stays fixed and will not slip over time. No special tools are required to install or adjust the loudspeaker angle. S8T, S10T and 12 models also feature M10 installation points for suspending the loudspeaker via eye-bolts as well as mounting points for an optional yoke bracket. AcousticDesign S8T, S10T and S12 loudspeakers meet IEC60529 IP-54 for dust and splash resistance and feature sealed input panels and powder coated aluminum grilles for added weather resistance. Presenting a clean, unobtrusive look, AD-S grilles are unadorned eliminating the need to cover obtrusive logo treatments. AD-S loudspeakers are available in either black (RAL 9011) or white (RAL 9010) and may be painted to match any décor. To minimize impact and disposal fees at the job site, all AD-S loudspeakers are packaged in environmentally friendly, recyclable cartons.
S8T Details Beamwidth:
Impedance / Frequence Response: 251 mm (9.9 in) Sound pressure, Level (dB)
200 100
40 20 10 200
500
1k
440 mm (17.3 in)
60
2k
5k
200
95
180
90
160
85
140
80
120
75
100
70
80
65
60
60
40
55
20
50
20k
20
50
100
200
254 mm (10 in)
Frequency (Hz) Horizontal
10k
100
500
1k
2k
5k
10k
0 20k
Frequency (Hz)
Vertical
iFLC: On-axis
iFRC: Impedance
Directivity Index and Q, Horizontal Off-Axis Frequency Response, Vertical Off-Axis Frequency Response available from the QSC website.
S8T Specifications:
251 mm (9.9 in)
System Details
AD-S8T
Effective frequency range
55 – 20k Hz
Rated noise power / voltage2
200 watts / 40 volts (rms)
Broad-band sensitivity3
90 dB SPL
Coverage angle (-6 dB)
105°
Directivity factor (Q)
7
Directivity Index
9 dB
Maximum continuous SPL4
113 dB
Maximum peak SPL4
119 dB
Rated impedance
8 ohms
Recommended amplifier power 254 mm (10 in)
400 watts
Transformer taps
70 V: 60, 30, 15, 7.5 watts and 8 ohm bypass 100V: 60, 30, 15 watts and 8 ohm bypass
HF transducer
1” exit / 1.4” voice-coil compression driver
LF transducer
8” weather resistant paper cone woofer, 2” / 51mm voice-coil
Input connector type
Euroblock connector with parallel output terminals
Enclosure material
Painted ABS polymer
Grille material
Powder coated aluminum
440 mm (17.3 in)
440 mm (17.3 in)
1
251 mm (9.9 in)
254 mm (10 in)
251 mm (9.9 in)
Dimensions:
Ingress protection
IP-54
Operating environment
Designed for indoor and outdoor use
Testing
The AD Series loudspeakers qualified for outdoor use using the following tests: Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
440 mm (17.3 in)
440 mm (17.3 in)
251 mm (9.9 in)
Enclosure Details
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and low temperature: tested according to QSC internal standards between -20° and 50° C Operating Temperature Range
254 mm (10 in)
254 mm (10 in)
-20 to 50 °C / -4 to 122 °F
Net weight
24.1 lbs / 11 kg
Product dimensions
17.3” x 10” x 9.9” (440 x 254 x 251mm)
Shipping weight
32.1 lbs / 14.5 kg
Shipping dimensions
24.3 x 13.8” X 13.8” (729 x 351 x 351mm)
Included accessories
X-Mount mounting system, euroblock connector, input panel cover
Optional accessories
YMS8T yoke mount, M10 Kit-C
Free-field, -10 dB from on-axis sensitivity 2 IEC60268-1 noise signal for 2 Hrs 3 On-Axis, free-field sensitivity, 2.83V, 1 m 4 Calculated from rated noise voltage and sensitivity 1
251 mm (9.9 in)
in)
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Impedance, Amplitude (ohm)
Beamwidth (-6 dB) (deg)
400
S8T Polars Horizontal Level (dB)
Level (dB)
0° +30°
+30°
+60°
+90°
-60°
-6 0
6
0°
-30°
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-120°
-150°
+150°
-150° +/-180° (deg)
200 Hz
315 Hz
500 Hz
800 Hz
250 Hz
400 Hz
630 Hz
1 kHz
Level (dB)
Level (dB)
0° +30°
+30°
-60°
-6 0
0°
-30°
+60°
6
-90°
+120°
+/-180° (deg)
+90°
-30 -24
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-150°
-120°
+150°
+/-180° (deg)
-150° +/-180° (deg)
1.3 kHz
2 kHz
3.1 kHz
5 kHz
1.6 kHz
2.5 kHz
4 kHz
6.3 kHz
Level (dB)
0° +30°
-30°
+60°
+90°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
+150°
-150° +/-180° (deg)
8 kHz
12.5 kHz
10 kHz
16 kHz
S8T Polars Vertical Level (dB)
Level (dB)
0° +30°
+60°
+90°
0
-18 -12
-30
+90°
-90°
-24
+120°
-60°
-6 6
0
-90°
+150°
-150°
-150° +/-180° (deg)
200 Hz
315 Hz
500 Hz
800 Hz
250 Hz
400 Hz
630 Hz
1 kHz
Level (dB)
Level (dB)
0° +30°
+30°
-60°
-6 0
0°
-30°
+60°
6
-30 -24
-120°
+/-180° (deg)
+90°
-18 -12
+120°
-120°
+150°
-30°
+60°
-60°
-6 6
0° +30°
-30°
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-150°
-120°
+150°
+/-180° (deg)
-150° +/-180° (deg)
1.3 kHz
2 kHz
3.1 kHz
5 kHz
1.6 kHz
2.5 kHz
4 kHz
6.3 kHz
Level (dB)
0° +30°
-30°
+60°
+90°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
+150°
-150° +/-180° (deg)
8 kHz
12.5 kHz
10 kHz
16 kHz
S10T Details Beamwidth:
Impedance / Frequence Response: (dB) Level, Sound pressure
(deg) Beamwidth (-6 dB)
Impedance, Amplitude (ohm)
95 200 516 mm (20.3 in)
90
100 70 40
85
90 80 70
80
60
75
50
70
40
65
30
60
20
100
298 mm (11.7 in)
100
400
20
318 mm (12.5 in)
55 10 200
500
1k
2k
5k
Horizontal
50
10k 20k Frequency (Hz)
10 20
50
100
200
500
1k
iFLC: On-axis SPL
Vertical
2k
0 10k 5k 20k Frequency (Hz)
iFRC: Impedance
Directivity Index and Q, Horizontal Off-Axis Frequency Response, Vertical Off-Axis Frequency Response available from the QSC website. 318 mm (12.5 in)
S10T Specifications:
318 mm (12.5 in)
298 mm (11.7 in)
318 mm (12.5 in)
System Details
AD-S10T
Effective frequency range1
50 – 19k Hz
Rated noise power / voltage2
250 watts / 45 volts (rms)
Broad-band sensitivity3
92 dB SPL
Coverage angle (-6 dB)
90°
Directivity factor (Q)
10
Directivity Index
10 dB
Maximum continuous SPL4
116 dB
Maximum peak SPL4
122 dB
Rated impedance
8 ohms
Recommended amplifier power
500 watts
Transformer taps
70 V: 100, 50, 25, 12.5 watts and 8 ohm bypass 100V: 100, 50, 25 and 8 ohm bypass
HF transducer
1” exit / 1.4” voice-coil compression driver
LF transducer
10” weather resistant paper cone woofer, 2.5” / 64 mm voice-coil
Input connector type
Euroblock connector with parallel output terminals
Enclosure material
Painted ABS polymer
Grille material
Powder coated aluminum
298 mm (11.7 in)
516 mm (20.3 in)
516 mm (20.3 in)
Dimensions:
Enclosure Details IP-54
Operating environment
Designed for indoor and outdoor use
Testing
The AD Series loudspeakers qualified for outdoor use using the following tests:
516 mm (20.3 in)
298 mm (11.7 in)
Ingress protection
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and low temperature: tested according to QSC internal standards between -20° and 50° C
516 mm (20.3 in)
Operating Temperature Range 318 mm (12.5 in)
318 mm (12.5 in)
-20 to 50 °C / -4 to 122 °F
Net weight
31 lbs / 15 kg
Product dimensions
20.3” x 12.5” x 11.7” (516 x 318 x 298mm)
Shipping weight
40.6 lbs / 18.45 kg
Shipping dimensions
31.7” x 16.1” X 16.1” (805 x 409 x 409mm)
Included accessories
X-Mount mounting system, euroblock connector, input panel cover
Optional accessories
YMS10T yoke mount, M10 Kit-C
Free-field, -10 dB from on-axis sensitivity 2 IEC60268-1 noise signal for 2 Hrs 3 On-Axis, free-field sensitivity, 2.83V, 1 m 4 Calculated from rated noise voltage and sensitivity 1
298 mm (11.7 in)
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
S10T Polars Horizontal Level (dB)
Level (dB)
0° +30°
+30°
+60°
+90°
-60°
-6 6
0
0°
-30°
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-120°
-150°
+150°
-150° +/-180° (deg)
F: 200 Hz
F: 315 Hz
F: 500 Hz
F: 800 Hz
F: 250 Hz
F: 400 Hz
F: 630 Hz
F: 1 kHz
Level (dB)
Level (dB)
0° +30°
+30°
-60°
-6 0
0°
-30°
+60°
6
-90°
+120°
+/-180° (deg)
+90°
-30 -24
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-150°
-120°
+150°
+/-180° (deg)
-150° +/-180° (deg)
F: 2.5 kHz
F: 1.6 kHz
F: 3.2 kHz
F: 5 kHz
F: 2 kHz
F: 1.25 kHz
F: 4 kHz
F: 6.4 kHz
Level (dB)
0° +30°
-30°
+60°
+90°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
+150°
-150° +/-180° (deg)
F: 8 kHz
F: 12.5 kHz
F: 10 kHz
F: 16 kHz
S10T Polars Vertical Level (dB)
Level (dB)
0° +30°
+60°
+90°
0
-18 -12
-30
+90°
-90°
-24
+120°
-60°
-6 6
0
-18 -12
+150°
-150°
-150° +/-180° (deg)
iO: 400 Hz
F: 250 Hz
F: 1 kHz
iO: 630 Hz
iO: 315 Hz
F: 200 Hz
F: 800 Hz
iO: 500 Hz
Level (dB)
Level (dB)
0° +30°
+30°
-60°
-6 0
0°
-30°
+60°
6
-90°
-120°
+/-180° (deg)
+90°
-30 -24
+120°
-120°
+150°
-30°
+60°
-60°
-6 6
0° +30°
-30°
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-150°
-120°
+150°
+/-180° (deg)
-150° +/-180° (deg)
F: 2.5 kHz
F: 1.6 kHz
F: 6.3 kHz
F: 4 kHz
F: 2 kHz
F: 1.25 kHz
F: 5 kHz
F: 3.2 kHz
Level (dB)
0° +30°
-30°
+60°
+90°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
+150°
-150° +/-180° (deg)
F: 16 kHz
F: 10 kHz
F: 12.5 kHz
F: 8 kHz
Beamwidth:
Impedance / Frequence Response: On-axis SPL and Impedance
Beamwidth
70 40 20 10 200
500
1k
2k
5k
10k
20k
Frequency (Hz) F: Horizontal
95
90
90
80 70
85 323 mm (12.7 in)
100
Sound pressure, Level (dB)
200
594 mm (23.4 in)
Beamwidth (-6 dB) (deg)
100
100
400
80 75 70 65
60 50 40 30 20
60
10
55 50
20
50
100
200
354 mm (13.9 in)
500
1k
5k
10k
Frequency (Hz)
iFLC: On-axis SPL
F: Vertical
2k
0 20k
iFR: Impedance
Directivity Index and Q, Horizontal Off-Axis Frequency Response, Vertical Off-Axis Frequency Response available from the QSC website.
S12T Specifications:
354 mm (13.9 in)
354 mm (13.9 in)
323 mm (12.7 in)
594 mm (23.4 in)
594 mm (23.4 in)
354 mm (13.9 in)
System Details
AD-S12
Effective frequency range1
52 – 20k Hz
Rated noise power / voltage2
300 watts / 50 volts (rms)
Broad-band sensitivity3
95 dB SPL
Coverage angle (-6 dB)
75°
Directivity factor (Q)
12
Directivity Index
11 dB
Maximum continuous SPL4
120 dB
Maximum peak SPL4
126 dB
Rated impedance
8 ohms
Recommended amplifier power
600 watts
HF transducer
1” exit / 1.4” voice-coil compression driver
LF transducer
12” weather resistant paper cone woofer, 3” / 76 mm voice-coil
Input connector type
Euroblock connector with parallel output terminals
Enclosure material
Painted ABS polymer
Grille material
Powder coated aluminum
323 mm (12.7 in)
Dimensions:
Enclosure Details Ingress protection
IP-54
Operating environment
Designed for indoor and outdoor use
Testing
The AD Series loudspeakers qualified for outdoor use using the following tests:
354 mm (13.9 in)
Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days
323 mm (12.7 in)
594 mm (23.4 in)
594 mm (23.4 in)
Salt fog: MIL-STD-810G Method 509.5 for 100 hrs.
High and low temperature: tested according to QSC internal standards between -20° and 50° C Operating Temperature Range
-20 to 50 °C / -4 to 122 °F
Net weight
35.2 lbs / 16 kg
Product dimensions
23.4” x 13.9” x 12.7” (594 x 354 x 323 mm)
Shipping weight
46.3 lbs / 21 kg
Shipping dimensions
34.5” x 17.9” x 17.2” (765 x 455 x 437 mm)
Included accessories
X-Mount mounting system, euroblock connector, input panel cover
Optional accessories
YMS12 yoke mount, M10 Kit-C
Free-field, -10 dB from on-axis sensitivity 2 IEC60268-1 noise signal for 2 Hrs 3 On-Axis, free-field sensitivity, 2.83V, 1 m 4 Calculated from rated noise voltage and sensitivity 1
323 mm (12.7 in)
As part of QSC’s ongoing commitment to product development, specifications are subject to change without notice.
Impedance, Amplitude (ohm)
354 mm (13.9 in)
S12 Details
S12 Polars Horizontal Level (dB)
Level (dB)
0° +30°
+30°
+60°
+90°
-60°
-6 6
0
0°
-30°
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-120°
-150°
+150°
-150° +/-180° (deg)
200 Hz
315 Hz
500 Hz
800 Hz
250 Hz
400 Hz
630 Hz
1 kHz
Level (dB)
Level (dB)
0° +30°
+30°
-60°
-6 0
0°
-30°
+60°
6
-90°
+120°
+/-180° (deg)
+90°
-30 -24
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-150°
-120°
+150°
+/-180° (deg)
-150° +/-180° (deg)
1.25 kHz
2 kHz
3.1 kHz
5 kHz
1.6 kHz
2.5 kHz
4 kHz
6.3 kHz
Level (dB)
0° +30°
-30°
+60°
+90°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
+150°
-150° +/-180° (deg)
8 kHz
12.5 kHz
10 kHz
16 kHz
S12 Polars Vertical Level (dB)
Level (dB)
0° +30°
+30°
+60°
+90°
0
-18 -12
-30
-90°
-24
+120°
+90°
-120°
+150°
-30°
+60°
-60°
-6 6
0°
-30°
-60°
-6 6
0
-18 -12
-120°
-150°
+150°
-150° +/-180° (deg)
200 Hz
315 Hz
500 Hz
800 Hz
250 Hz
400 Hz
630 Hz
1 kHz
Level (dB)
Level (dB)
0° +30°
+30°
-60°
-6 0
0°
-30°
+60°
6
-90°
+120°
+/-180° (deg)
+90°
-30 -24
-18 -12
-30
+60°
-90°
-24
+120°
+90°
-120°
+150°
-30°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
-150°
+150°
+/-180° (deg)
-150° +/-180° (deg)
1.3 kHz
2 kHz
3.1 kHz
5 kHz
1.6 kHz
2.5 kHz
4 kHz
6.3 kHz
Level (dB)
0° +30°
-30°
+60°
+90°
-60°
-6 6
0
-18 -12
-30
-90°
-24
+120°
-120°
+150°
-150° +/-180° (deg)
8 kHz
12.5 kHz
10 kHz
16 kHz
Specifications subject to change without notice.
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 © 2013 QSC Audio Products, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. DMT is a trademark of QSC. Speakon is a registered trademark of Neutrik
AD-S8T | AD-S10T | AD-S12 Spec Sheet 04/29/2013
please recycle
