Transcript
Power Over Ethernet Combined Power and Data Technology for Network Flexibility
Connect and Power Network Devices Without the Need for Expensive Power Runs and Additional Cabling Combine power and data on one cable - eliminating the need for additional, unnecessary power cable runs to security cameras, wireless access points, or IP phones. Transition Networks’ full line of feature rich Power-over-Ethernet (PoE) products ease installation and power location concerns enabling your network to have the intended flexibility and scalability to expand and grow. Transition Networks designs power injectors, media converters and Ethernet swithches with PoE/PoE+, extended temperature ranges, industry-required certifications and remote management.
1
Remote Powered Solutions for Security & Surveillance Applications • Secure Access Systems • Indoor/Outdoor Surveillance • Retail Environments • Traffic & Vehicle Monitoring
PoE Switches Connect and Power WAPs, VoIP and Network Cameras UTP w/ PoE Wireless Access Point
UTP w/ PoE UTP w/ PoE
Network Camera
VoIP Phone
UTP w/ PoE
UTP w/ PoE
Network Camera
VoIP Phone
Managed PoE Switch
Product features: • Preservation of Cabling Infrastructure • Avoids altering existing wiring and does not damage cabling infrastructure already in place • Power delivery over Ethernet cables does not cause data degradation or loss of data integrity • Provide up to 30w output for 2 ports or up to 15w output for 4 ports or up to 7.5w for 8 ports
• Power Management: - Enable/Disable per port - Priority setting per port - Overloading Protection per port - Power Level setting per port • Web Management, Telnet SNMP V1/V2c /V3 • Support Jumbo Frame up to 9K bytes • Security - Support SSH/SSL
2
SM8TAF2DPA
MIL-L100i (1) Port PoE Mid-Span Injector Transition Networks’ Power-over-Ethernet solutions deliver unified supply of data, voice, and video as well as electrical power through a single source by sending power over standard CAT 5 and above twisted pair cables. Power-over-Ethernet simplifies installation and eliminates the need to run separate power cords and LAN cables to each Access Point or port locations.
Ordering Information MIL-L100i EmPowered™ Ethernet 1-port PoE Injector
Our PoE products provide organizations with affordable, easyto-use solutions that enable them to migrate their network infrastructure to support a growing number of advanced cost-saving, performance enhancing applications, such as streamlining wireless, VoIP, Network IP camera deployments, and centralized power backup solutions. Whether on a factory floor or in an enterprise facility, running power to hard to reach locations with MILAN by Transition’s Power-over-Ethernet solutions significantly reduce cabling and outlet requirements while providing the lowest total cost of ownership.
Features
Specifications
•
Ensures uninterrupted network operation by providing a “power safe” path to the user
Standards
IEEE 802.3af IEEE 802.3 IEEE 802.3u
•
Intelligent detection process to detect Power-over-Ethernet enabled terminals and protect legacy endpoints
LEDs
Power: PoE power is being injected into the Data Out port
•
Furnishes easy and cost-effective installation with fewer cables and electrical outlets
Ports
(1) DATA IN RJ-45 Ethernet Port (1) DATA OUT PoE Injector RJ-45 Ethernet Port
•
Provides one central secure location for power
•
IEEE 802.3af compliant
•
Ensures safe delivery of power to existing legacy devices as well as power-enabled terminals
•
Avoids altering existing wiring and does not damage cabling infrastructure already in place
•
Power delivery over Ethernet cables does not cause data degradation or loss of data integrity
•
Easiest way to add support of PoE to an existing network without replacing existing equipment
Cable Requirements 10BASE-T: 2-pair UTP/STP Cat.3,4, 5 cable EIA/TIA-568100- ohm(100 m) 100BASE-TX: 2-pair UTP/STP Cat.5 cable EIA/TIA-568 100-ohm(100 m) Dimensions
Width: 4.6” [117 mm] Depth: 2.3” [60 mm] Height: 1.3” [35 mm]
Weight
.44 lbs. [0.2 kg]
Power Output
-48 VDC, 300 mA
Power Input
AC 100~240V, 50~60 Hz, 0.3A
Environment
Operating: 0°C to 40°C Relative Humidity: 90% (non-condensing) Storage: 0°C to 70°C Relative Humidity: 95% (non-condensing)
Compliance
Safety: UL, cUL, CE/EN60950 Emissions: FCC Class B, CE Mark
Waranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 3
L1000i-at (1)Port PoE+ Mid-Span Injector Transition Networks’ L1000i-at is a 1-port 10/100/1000Base-T PoE+ midspan injector which provides a simple, cost-effective, fully IEEE 802.3at compliant solution to upgrade existing infrastructure with PoE+. Powering high-powered PoE+ enabled network devices, such as PTZ dome network cameras, can be done without the need to install power outlets and electrical cabling.
Ordering Information L1000i-at 10/100/1000Base-T 1-port PoE+ Injector
PoE technology allows IP phones, wireless access points, and security network cameras to receive power, along with data, over standard Ethernet cables, leaving network infrastructure completely unaltered. PoE technology also allows for easier installation in areas where power cabling and outlets are unavailable, thereby reducing installation costs. Midspan injectors offer users the ability to take advantage of PoE technology while protecting investments they’ve made in purchasing, configuring, and deploying non-PoE supported devices such as standard Ethernet switches.
Features
Specifications
•
Power Over Ethernet Injector for 10/100/1000Base-T
•
Remote Power Feeding
Standards
IEEE 802.3 IEEE 802.3U IEEE 802.3ab IEEE 802.3af IEEE 802.3at
•
Overload and short circuit protection
•
Mixes Ethernet and power on the RJ-45 port
LEDs
AC Power Feeding Power
•
Delivers power up to 100 meters
Ports
(1) DATA IN RJ-45 Ethernet Port (1) DATA OUT PoE Injector RJ-45 Ethernet Port
•
Light weight and compact size
•
Plug-and-play
•
IEEE 802.3at and IEEE 802.3af compliant
Cable Requirements 10BASE-T: 2-pair UTP/STP Cat.3,4,5 cable EIA/TIA-568 100-ohm(100 m) 100BASE-TX: 2-pair UTP/STP Cat.5 cable (Cat. 5e recommended); EIA/ TIA-568 100-ohm(100 m) 1000Base-T: 4-pair UTP/STP Cat.5e or above cable; EIA/TIA-568 100-ohm, 100m Dimensions
Width: 2.65” [65mm] Depth: 5.51” [140mm] Height: 1.42” [36mm]
Weight
1 lb. [0.45 kg]
Input Power
AC input voltage range: 100 – 240 VAC; 50 – 60Hz 0.72A
Output Power
55V @ 0.6A
Environment
Operating 0°C to 40°C Storage: -40°C to 70°C
Compliance
Safety: UL, cUL, CE/EN60950-1 Emissions: FCC Clas B, CE Mark
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 4
SI-IES-1200-LRT Unmanaged Hardened PoE+ Injector (1) 10/100/1000Base-T Port and (1) 10/100/1000Base-T PoE+ Port The SI-IES-1200-LRT is an unmanaged hardened PoE+ injector that adds up to 30 watts of power on a network segment. Injectors are commonly used to power PoE devices in locations where a power source does not exist. The injector has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks’ hardened PoE injectors are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
Features •
IEEE 802.3at PoE+ to supply 30W
•
Non blocking architecture
•
Compact size
•
IP30 housing protection
•
Link Fault Pass-Through Function
•
Extended Operating Temperature (-40 to 75C)
•
Din Rail mount included
Ordering Information SI-IES-1200-LRT
Hardened 1-port Mid-span PoE+ injector Optional Accessories (sold separately) Industrial Power Supplies: 25130 48 VDC 39.8W (See page 23 for details)
Specifications Standards
IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3at
Status LEDs
PWR1(Power): ON=primary power connected PWR2(Power): ON=backup power connected
Connectors
(1) DATA IN RJ-45 Ethernet Port (1) DATA OUT PoE+ RJ-45 Ethernet Port 30 watts
Dimensions
Width: 1.2” [30 mm] Depth: 3.7” [95 mm] Height: 5.5” [140 mm]
Weight
1 lb. [0.45 kg]
Ingress Protection
IP30
Installation
Din-Rail, Wall-Mount
Input Power
24/48VDC
Power Consumption
3.525 watts (No PoE) 33.36 watts (1port PoE)
Environment
Operating: -40°C to 75°C Humidity: 5%– 95% (non-condensing) Storage:-40°C to 85°C Humidity: 5%– 95% (non-condensing) Altitude: 0-10,000 Feet
Compliance Safety: UL508 Emissions: FCC Class A; CE Mark; Immunity: EN61000-6-4; EN61000-6-2; EN61000-4-2 (ESD); EN61000-4-3 (RS); EN61000-4-4 (EFT); EN61000-4-5 (Surge); EN61000-4-6(CS); EN61000-4-8 (Magnetic Field); Environmental: IEC60068-2-27(Shock); IEC60068-2-32 (Free fall); IEC60068-2-6 (Vibration) Warranty
Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 5
SPOEB10xx-100 Power-Over-Ethernet PSE Media Converter Enables enterprises to provide power to network devices over the existing CAT5 data connection.
SPOEB1011-100
Transition Networks’ AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities (see switch section under specifications to the right). In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI.
Features
Specifications
•
External AC power supply
Standards
IEEE Std. 802.3 IEEE Std. 802.3af
•
IEEE 802.3af Power-Over-Ethernet Compatible
•
48 VDC PSE Output Voltage
•
Signal Pair or Spare Pair Power Insertion
•
PD Detection Signature
•
Over-Current Protection & Under-Current Detection
Switches
SW1: Auto-Negotiation On/Off SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off) SW3: Duplex TP: Force Half or Full Duplex (SW1 off) SW4: Duplex Fiber: Half or Full Duplex SW5: Auto-MDI/MDIX™ On/Off SW6: PSE On/Off SW7: PSE/LPT on/off SW8: Unused
Max Packet Size
1522 bytes untagged 1518 bytes tagged
•
Powered Device Reset
•
Switch selectable features and port settings
Dimensions
Width: 3.25” [82 mm] Depth: 4.8” [120 mm] Height: 1.0” [25 mm]
Weight
2 lbs. [0.90 kg]
•
Minimum Load Sensing
Power
90 – 250 VAC external power supply
•
Fault Protection Input
Power Consumption
20 Watts max.
•
Auto-Negotiation
•
Auto-MDI/MDIX
•
Link Pass Through
Environment
Operating: 0°C to 40°C Humidity: 5%– 95% (non-condensing) Storage:-25°C to 85°C Humidity: 5%– 95% (non-condensing) Altitude: 0-10,000 Feet
•
Far-End-Fault (FEF)
Compliance
Safety: UL 1950 Emissions: EN55022:1994+A1:1996+A2:1997 Class A; FCC Part 15 Subpart B
•
Automatic Link Restoration
Warranty Lifetime
Ordering Information SPOEB1011-100 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB SPOEB1013-100 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1300nm multimode (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB SPOEB1014-100 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm SM (SC) [20 km/12.4 mi.] Link Budget: 16.0 dB
Optional Accessories (sold separately) Mounting Options WMBD or WMBL Wall Mount Brackets RMS19-SA4-01 4-Slot Media Converter Shelf
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 6
SGPOE10xx-1x0 Power-Over-Ethernet PSE Media Converter Transition Networks’ AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring Features per the IEEE 802.3af standard. Other Features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the Features as well as force port capabilities (see switch section under specifications). SGPOE1040-110
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. Also known as Powered Device Reset. The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard as well as select legacy PD’s. The PoE converter is capable of inserting power on data mode A or mode B pairs of the MDI.
Ordering Information SGPOE1013-100 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm MM (SC) [62.5/125 µm: 220 m/722 ft.] Link Budget: 8.0 dB [50/125 µm: 550 m/1804 ft.] Link Budget: 8.0 dB SGPOE1039-100 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm MM (LC) [62.5/125 µm: 220 m/722 ft.] Link Budget: 8.0 dB [50/125 µm: 550 m/1804 ft.] Link Budget: 8.0 dB SGPOE1040-100 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 100/1000BASE-X SFP Slot (empty) SGPOE1040-110 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to (2) 100/1000BASE-X SFP slots (empty) Optional Accessories (sold separately) SFP Modules Mounting Options WMBD DIN Rail Mount Bracket 5.0” [127 mm]
Features
Specifications
•
SFP ports support either 100Base or 1000Base fiber
Standards
IEEE Std. 802.3 IEEE Std. 802.3af
•
Redundant SFP port option
•
IEEE 802.3af Power-Over-Ethernet Compatible
•
48 VDC PSE Output Voltage
•
Mode A or Mode B Pairs Power Insertion
•
PD Detection Signature
Switches
SW1: Auto-Negotiation TP On/Off SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off) SW3: Duplex TP: Force Half or Full Duplex (SW1 off) SW4: Duplex Fiber: Half or Full Duplex SW5: Auto-MDI/MDIX™ On/Off SW6: PSE On/Off SW7: PSE/LPT On/Off SW8: Unused
•
PoE Legacy Detect for non-IEEE 802.3af compatible Powered Devices (PD)
Max Packet Size
1632 bytes untagged 1628 bytes tagged
MAC Addresses
8K
•
Over-Current Protection & UnderCurrent Detection
•
Powered Device Reset
Dimensions
Width: 4.4” [112 mm] Depth: 5.1” [129 mm] Height: 1.0” [25 mm]
Weight
2 lbs. [0.90 kg]
•
Minimum Load Sensing
•
Fault Protection Input
Power
90 – 250VAC external power supply External AC/DC required; 48 vdc 0.67A
•
Auto-Negotiation
Power Consumption
20 Watts max.
•
Auto-MDI/MDIX
•
Link Pass Through available on SGPOE10xx-100
Environment
Operating: 0°C to 40°C Humidity: 5%– 95% (non-condensing) Storage:-25°C to 85°C Humidity: 5%– 95% (non-condensing) Altitude: 0-10,000 Feet
•
Automatic Link Restoration
•
External AC power supply
Compliance
Safety: UL 1950 Emissions: EN55022:1994+A1:1996+A2:1997 Class A; FCC Part 15 Subpart B
•
Switch Selectable Features and Port Settings
WMBL Wall Mount Bracket 4.0” [102 mm]
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 7
SGPAT10xx-100 Power-Over-Ethernet (PoE+) PSE Media Converter The SGPAT10xx-100 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which allows two different types of network segments to be connected easily and affordably while also injecting PoE+ power through the copper RJ-45 port.
SGPAT1013-100
PoE allows for the transmission of power over the same copper cables used to transmit data. PoE+ media converters are Power Sourcing Equipment (PSE). This AC powered media converter combines data received over a fiber optic link with 56VDC power to provide power and data to Powered Devices (PD) over unshielded twisted pair cabling while complying with IEEE 802.3at PoE+ and also backwards compatible with IEEEE 802.3af standard PoE. The converter includes a PD signature sensing and power monitoring features. Other features include over-current protection, under-current detection, and fault protection input. Link Pass Through and Remote Fault Detect allows the media converter to monitor both the fiber and the copper ports for the loss of a receive (RX) signal and propagate the failure on to the end devices.
Ordering Information SGPAT1013-100 10/100/1000Base T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm MM (SC) [62.5/125um: 220m / 722 ft.] [50/125um: 550m / 1804 ft.] Link Budget: 7.5 dB SGPAT1039-100 10/100/1000Base T (RJ-45) [100 m/328 ft.] to 1000Base-SX 850nm MM (LC) [62.5/125um: 220m / 722 ft.] [50/125um: 550m / 1804 ft.] Link Budget: 7.5 dB SGPAT1014-100 10/100/1000Base T (RJ-45) [100 m/328 ft.] to 1000Base-LX 1310nm SM (SC) [10km / 6.2mi] Link Budget: 10.5 dB SGPAT1019-100 10/100/1000Base T (RJ-45) [100 m/328 ft.] to 1000Base-LX 1310nm SM (LC) [10km / 6.2mi] Link Budget: 10.5 dB Optional Accessories (sold separately) Mounting Options WMBD DIN Rail Mount Bracket 5.0” [127 mm]
Features
Specifications
•
Internal AC power supply
•
Over-current protection
•
Under-current detection
Standards
•
Minimum load sensing
•
Fault Protection Input
•
Auto Negotiation
•
Auto-MDI/MDIX
Max Packet Size
9216 Bytes in Cut-Through Mode 2048 Bytes in Normal Mode
•
Link Pass Through
•
Remote Fault Detect
•
Wall mount or Tabletop installation
Status LEDs
PWR (Power): On = Power LNK/ACT 1: On = Copper Link, Blinking = Activity LNK/ACT 2: On = Fiber Link, Blinking = Activity 10/100/1000: Green = Copper 1000Mbps Link Amber = Copper 100Mbps Link Off = Copper 10Mbps Link PoE1: On = RJ-45 (1,2), (3,6) pairs detect PD PoE2: On = RJ-45 (4,5), (7,8) pairs detect PD
Dimensions
Width: 6.22” [158mm] Depth: 5.23” [133mm] Height: 1.57” [40mm]
Weight
2 lbs. [0.90 kg]
Power Consumption
Input: 100 – 240 VAC, 47 – 63 Hz Consumption: Max. up to 30W
Environment
Operating: 0°C to 40°C Humidity: 5% - 90% Storage: -20°C to 70°C
Compliance
FCC Part 15 Class A and CE Mark
IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.3x IEEE 802.3at
WMBL Wall Mount Bracket 4.0” [102 mm]
Switches Switch 1: Cut-Through Mode (default) or Normal Mode Switch 2: Link Pass Through Enable (default) or Disable Switch 3: PoE Enable(default) or Disable
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 8
S8TXATA Unmanaged Fast Ethernet PoE Switch 8-port 10/100/Base-TX PoE+ The S8TXATA, 8-port Fast Ethernet switch, integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities.
Ordering Information S8TXATA (8) 10/100BASE-TX PoE Plus Ports (Includes 19” Rack Mount Ears)
Featuring IEEE 802.3af and IEEE 802.3 at compliant Power-over-Ethernet capability over 8 ports. The S8TXATA is easy to install and does not require configuration. The PoE ports automatically detect and supply power to devices.
Features •
Auto Negotiation
•
Wire-speed packet filtering and forwarding rate
•
Supports IEEE 802.3x flow control for Full duplex mode
•
Supports IEEE 802.1p QoS
•
Fanless Design
•
LED indicators for monitoring power, link, activity and speed
•
Supports IEEE 802.3az Energy-Efficient Ethernet
PoE Features
Specifications Standards IEEE 802.3 IEEE 802.3u IEEE 802.1p IEEE 802.3x IEEE 802.3af IEEE 802.3at IEEE 802.3az Protocols CSMA/CD
Features (Continued)
Technology
Store and Forward switching architecture
Connectors
8 10/100 RJ-45 ports
MAC Address
2K MAC address table
Back Plane
1.6 Gbps
Dimensions
Width: 11.02" [280 mm] Depth: 7.04" [179 mm] Height: 1.75" [44.5 mm]
•
Provide power to remote devices over an Ethernet network
Weight
4.65 lbs. [2.10 kg]
•
Input Power
Internal power: 100-240VAC
Provide enough power to increasingly power-hungry devices
Power Consumption
130 watts (full PoE load)
•
Maximum output power 120 watts Maximum output power per port up to 30w Provide power on all 8 copper ports
Offer a Unified Communications device with an open standard
•
Fan-less design offers a 100% silent switch option for offices and classrooms
•
Compliant with IEEE 802.3at PoE+
•
Compliant with IEEE 802.3af PoE
Power over Ethernet
•
Provide up to 30w to PD
Environment
Operating: 0°C to 50°C Humidity:10%– 90% (non-condensing)
•
Total PoE budget 120w
Compliance
Safety: LVD Emissions: FCC Class A, CE
Connect and power Wireless Access Points, Network Cameras and VoIP Phones
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 9
Leverage Legacy Network Infrastructure and Equipment for Future Applications • Extend Network Capabilities • Reduce Network Operational Costs • Maximize Investment in Network Expansion • Choose Variable Management Options
Beyond 100 Meters
PoE+ Media Converter
PoE Network Camera
DVR Coax Infrastructure
Fiber Cable Network Camera PoE Network Camera
IP over Coax
PoE+ Media Converter Emergency IP Phone
Composite Video/HDMI
Within 100 Meters
PoE+ Switch Coax
Indoor PoE PTZ Camera
Legacy CCTV Camera
IP Video Encoder
Media PLayer
Product Features: • Easiest way to add support of powered devices to legacy networks without replacing existing equipment • Offer “Plug and Play” features providing connections to PoE devices used at the edge of a network • Intellegent detection process to detect Power-overEthernet enabled terminals and protect legacy endpoints • Provide power-safe path to users that ensure uninterrupted network operation
10
PTZ Controller
SISTP101x-141-LRT
Unmanaged Hardened Fast Ethernet PoE Switch (4) 10/100Base-TX PoE Ports and (1) 100Base-FX Port Ordering Information The SISTP101x-141-LRT switch family contains simple “Plug and Play” multiport switches used at the edge of a hardened network to provide connections for PoE devices. Depending on the model, these switches can provide Multi-Mode or Single Mode fiber connections with SC or ST connectors for extended distance communications up to 30 kilometers. These switches provide 15.4 watts per port on all ports simultaneously; have redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
SISTP1011-141-LRT (4) 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm MM (ST) [2 km/1.2 mi.] Link Budget: 11.0 dB SISTP1013-141-LRT (4) 10/100BASE-TX (RJ-45)[100 m/328 ft.] to 100BASE-FX 1310nm MM (SC) [2 km/1.2 mi.] Link Budget: 11.0 dB SISTP1014-141-LRT (4) 10/100BASE-TX (RJ-45) [100 m/328 ft.] to 100BASE-FX 1310nm SM (SC) [30 km/12.4 mi.] Link Budget: 17.0 dB Optional Accessories (sold separately) External AC/DC Power Supply 25080 48~53 VDC 120W (See page 23 for details)
SISTP1013-141-LRT
Features •
Auto-Negotiation
•
Auto-MDI/MDIX
•
Full Wire Speed Performance with 1 Gbps Backplane
•
4-port integrated PoE injector with full 15.4 Watts per port on data pairs
•
IEEE 802.3af Power-over-Ethernet Compliant
•
Extended operating temperature (-40°C to 75°C)
•
Dry Contact Relay Alarm Output
•
Dual, Redundant 48 VDC Power Inputs
•
Reverse Polarity Power Input Protection
•
Overload Current Protection
•
DIN Rail Mounting and Wall Mount Brackets Included
•
Store-and-Forward Architecture
Specifications Standards
IEEE 802.3 IEEE 802.3af IEEE 802.3u IEEE 802.3x
Status LEDs
PWR 1 (Power): ON = primary power connected PWR 2 (Power): ON = backup power connected FAULT: ON = power input failure on PWR1 or PWR2 PWR FWD (ports 1-4): ON = PoE power output LNK/ACT (ports 1-5): ON = Link; FLASHING = data transmitting FDX/COL (ports 1-4): ON = Full duplex mode; FLASHING = collisions occuring
Dimensions
Width: 1.2” [30 mm] Depth: 3.7” [95 mm] Height: 5.5” [140 mm]
Weight
1.4 lbs. [0.64 kg]
Ingress Protection
IP 30
Input Power
48 VDC; redundant inputs (removable terminal block), additional barrel connector
Power Consumption
4.6 Watts (without PoE); 58 Watts (Full load with PoE)
Environment
Operating: -40°C to 75°C Humidity: 5% – 95% (non-condensing) Storage: -40°C to 85°C Altitude: 0 – 10,000 ft.
Compliance
Safety: UL, cUL, CE/EN60950-1 Emissions: CISPR22/EN55022; EN60950 Class A; FCC ClassA; CE Mark;CE Immunity: EN61000-4-2; CE EN61000-4-3; CE EN- 61000-4-4; CE EN61000-4-5; CE EN61000-4-6; CE EN61000-4-8; CE EN61000-4-11; CE EN61000- 6-2; CE EN610006-4; Environmental: IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock); IEC60068-2-6 (Vibration)
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 11
SISTP1010-380-LRT-B
Unmanaged Hardened Gigabit PoE(+) Ethernet Switch (8) 10/100/1000Base-T PoE(+) Ports Ordering Information The SISTP1010-380-LRT accepts 24VDC power input and provides 8 PoE capable ports. The switch has a 120 Watt PoE power budget that can be utilized over all 8 ports. This switch has been tested and certified for shock and vibration tolerance and is suitable for use in mobile applications in logistics or commuter transportation in temperatures between -40°C and +70°C. Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
Features
Specifications
•
Provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports based on IEEE 802.3at standard
•
Supports dual wide range 24~36VDC power inputs for power redundancy
Standards
IEEE 802.3 IEEE 802.3x IEEE 802.3u IEEE 802.3ab IEEE 802.3at
•
Auto-MDI/MDIX
•
Auto-negotiation
Status LEDs
PWR 1 (Power): ON = primary power connected; PWR 2 (Power): ON = backup power connected; FAULT (Amber): ON = power input failure on PWR1 or PWR2; POE Indicator (ports 1-8): GRN = POE power injected LNK/ACT (ports 1-8): GRN = Link/Act;
•
Extended Operating Temperature (-40°C to 70°C)
DIP Switch
Power-1 failed warning: (ON) enable, (OFF) disable Power-2 failed warning: (ON) enable, (OFF) disable
•
Dry Contact Relay Alarm Output
Ingress Protection
IP 30
•
Overload Current Protection
•
DIN Rail Mounting and Wall Mount Brackets Included
Dimensions
Width: 1.6” [41 mm] Depth: 3.7” [95 mm] Height: 5.68” [144.3 mm]
Weight
1.0 lbs. [0.45 kg]
Input Power
24 – 36 VDC; redundant inputs
Power Output
120 Watts max: 30w for any four ports simultaneously 15w for all eight ports simultaneously
Power Consumption
7.8 watts (without PoE)
Environment
OPerating: -40°C to 70°C Storage: -40°C to 85°C Humidity: 5% – 95% (non-condensing)
•
E-Mark Certified
SISTP1010-380-LRT-B (8) 10/100/1000BASE-TX (RJ-45) [100 m/328 ft.] PSE Optional Accessories (sold separately) External AC/DC Power Supply 25079 24~28 VDC 120W (See page 23 for details)
Compliance Safety: EN60950-1, E-Mark Certified Emissions: CISPR (EN55022); FCC Part 15 Class A; CE Mark; EN61000-4-2(ESD); Immunity: EN61000-4-3(RS); EN-61000-4-4(EFT); EN61000-4-5(Surge); EN61000-4-6(CS); CE EN61000-4-8; EN61000-4-11 Environmental: IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock); IEC60068-2-6 (Vibration) Warranty
Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 12
SISTP1040-242-LRT
Unmanaged Hardened Gigabit PoE+ Ethernet Switch (4) 10/100/100Base-T PoE+ and (2) 1000Base-X SFP Ports Ordering Information The SISTP1040-242-LRT switch is a simple “Plug and Play” multi-port switch used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two gigabit speed SFP ports provide the ultimate flexibility in fiber connections and communication distances. The two uplink ports can also be used in a redundant ring for maximum network reliability. This switch is Class I, Div 2 certified, provides 30 watts per port on all ports simultaneously, has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments.
Features
IEEE 802.3x IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.3at IEEE 802.3af
Status LEDs
Power 1 (Green), Power 2 (Green), P-Fail (Red) Ethernet: Link/Activity (Green), Speed (Green), PoE (Green) SFP: Link/Activity (Green)
PoE Pin Assignments
Provides 30W per PoE+ port, Alternative A Positive (VCC+): RJ-45 pin 1, 2. Negative (VCC-): RJ-45 pin 3, 6.
Dimensions
Width: 2.35” [59.6mm] Depth: 4.14” [105mm] Height: 6” [152mm]
Extended operating temperature (-40°C to 75°C)
Weight
2.65 lbs.[1.2 kg]
Ingress Protection
IP30
•
Dry Contact Relay Alarm Output
Input Power
DC V48(44V~57V), Redundant power,current over load protection, polarity reverse protect
•
DIN Rail Mounting and Wall Mount Brackets Included
Fault Output
Relay output contacts, 1A @ 24 VDC load capacity
Power Consumption
5.5 Watts (without PoE) 125.5 Watts (full PoE)
Environment
OPerating: -40°C to 75°C Storage: -40°C to 85°C Humidity: 5% – 95% (non-condensing)
Compliance
Safety: UL/cUL 508, Class I / Division 2 Groups A, B, C, D (Pending) Emissions: CISPR (EN55022); FCC Part 15 Class A; CE Mark; Immunity: EN61000-4-2(ESD); EN61000-4-3(RS); EN-61000-4-4(EFT);EN61000-4-5(Surge); EN61000-4-6(CS); CE EN61000-4-8; Environmental: IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock); IEC60068-2-6 (Vibration)
Warranty
Lifetime
Provides 4 10/100/1000Base-T(X) PoE (P.S.E.) ports based on IEEE 802.3at standard
•
2 1000Base-X SFP slots for daisychain
•
Supports dual 44 – 57 VDC power inputs for power redundancy
•
Polarity Reverse Protection
•
Auto-MDI/MDIX
•
Auto-negotiation
•
•
Class 1, Div 2 Certified
Optional Accessories (sold separately) SFP Modules External AC/DC Power Supply 25105 48~55 VDC 120W 25080 48~53 VDC 120W (See page 23 for details)
Specifications Standards
•
SISTP1040-242-LRT (4) 10/100/1000BASE-TX (RJ-45) PSE [100 m/328 ft.] (2) 1000Base-X SFP [110km/68.4mi]
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 13
SI-IES-111D-LRT Unmanaged Hardened PoE+ Injector/Converter (1) 100/1000Base-X SFP Port and (1) 10/100/1000Base-T PoE+ Port
Ordering Information
The SI-IES-111D-LRT is an unmanaged hardened PoE+ injector that adds up to 30 watts of power on a network segment. The gigabit speed SFP port provides the ultimate flexibility when used with SFP modules that best meet network requirements. Injectors are commonly used to power PoE devices in locations where a power source does not exist. The injector has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks’ hardened PoE injectors are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
SI-IES-111D-LRT Hardened 1-port Mid-span PoE+ injector
Optional Accessories (sold separately) Industrial Power Supplies: 25130 48 VDC 39.8W (See page 23 for details)
Features
Specifications
•
IEEE 802.3at PoE+ to supply 30W per port
•
Supports dual speed for SFP slot
Standards
IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3at IEEE 802.3z
•
Non Blocking Architecture
•
Compact size saving space
•
IP30 Housing Protection
Status LEDs
PWR1(Power): ON=primary power connected PWR2(Power): ON=backup power connected PoE+ Port Link/ACT PoE+ Port Gigabit Transmission SFP Port Link/ACT
•
Link Fault Pass-Through Function
Connectors
(1) DATA IN SFP Ethernet Port (1) DATA OUT PoE+ RJ-45 Ethernet Port 30 watts
•
Extended Operating Temperature (-40°C to 75°C)
•
DIN Rail mount included
Dimensions
Width: 1.44” [36.7 mm] Depth: 3.72” [94.5 mm] Height: 4.26” [108.4 mm]
Weight
1.3 lbs. [0.6 kg]
Ingress Protection
IP30
Installation
Din-Rail, Wall-Mount (Optional)
Input Power
48 VDC
Power Consumption
3.525 watts (No PoE) 34 watts (1port PoE)
Environment
Operating: -40°C to 75°C Humidity: 5%– 95% humidity (non-condensing) Storage: -40°C to 85°C Humidity: 5% – 95% (non-condensing) Altitude: 0-10,000 Feet
Compliance Safety: UL508 Emissions: FCC Class A; CE Mark Immunity: EN61000-6-4; EN61000-6-2; EN61000-4-2 (ESD); EN61000-4-3 (RS); EN61000 4-4 (EFT); EN61000-4-5 (Surge); EN61000-4-6(CS) EN61000-4-8 (Magnetic Field); IEC60068-2-27 (Shock); IEC60068-2-32 (Free fall); IEC60068-2-6 (Vibration) Warranty
Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 14
SI-IES-121D-LRT Unmanaged Hardened PoE+ Injector/Converter (1) 100/1000Base-X SFP Port and (2) 10/100/1000Base-T PoE+ Port
Ordering Information
The SI-IES-1200-LRT is an unmanaged hardened PoE+ injector/ switch that adds up to 30 watts of power on two network segments. The gigabit speed SFP port provides the ultimate flexibility by allowing fiber SFP uplink ports with varying communication distances. Injectors are commonly used to power PoE devices in locations where a power source does not exist. The injector has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks’ hardened PoE injectors are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
SI-IES-121D-LRT Hardened 2-port Mid-span PoE+ injector
Optional Accessories (sold separately) Industrial Power Supplies: 25131 48~55 VDC 76.88W 25105 48~55 VDC 120W (See page 23 for details)
Features
Specifications
•
IEEE 802.3at PoE+ to supply 30W per port
•
Supports dual speed for SFP slot
Standards
IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3at IEEE 802.3z
•
Non Blocking Architecture
•
Compact size saving space
•
IP30 of housing protection
Status LEDs
PWR1(Power): ON=primary power connected PWR2(Power): ON=backup power connected PoE+ Port Link/ACT PoE+ Port Gigabit Transmission SFP Port Link/ACT
•
Link Fault Pass-Through Function
Connectors
(1) DATA IN SFP Ethernet Port (2) DATA OUT PoE+ RJ-45 Ethernet Port 30 watts
•
Extended Operating Temperature (-40°C to 75°C)
•
DIN Rail mount included
Dimensions
Width: 1.44” [36.7 mm] Depth: 3.72” [94.5 mm] Height: 4.26” [108.4 mm]
Weight
1.6 lbs. [0.72 kg]
Ingress Protection
IP30
Installation
Din-Rail, Wall-Mount (Optional)
Input Power
48 VDC
Power Consumption
3.525 watts (No PoE) 63.5 watts (2 ports PoE)
Environment
Operating: -40°C to 75°C Humidity: 5%– 95% humidity (non-condensing) Storage: -40°C to 85°C Humidity: 5% – 95% (non-condensing) Altitude: 0-10,000 Feet
Compliance Safety: UL508 Emissions: FCC Class A; CE Mark; Immunity: EN61000-6-4; EN61000-6-2; EN61000-4-2 (ESD); EN61000-4-3 (RS); EN61000 4-4 (EFT); EN61000-4-5 (Surge); EN61000-4-6(CS) EN61000-4-8 (Magnetic Field); IEC60068-2-27 (Shock); IEC60068-2-32 (Free fall); IEC60068-2-6 (Vibration) Warranty
Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 15
MIL-SM8TXAF2GPA Managed Fast Ethernet PoE Switch 8-port 10/100BASE-TX + (2)SFP Combo Ports The MIL-SM8TXAF2GPA connects remote PoE segment to the network over fiber. The switch delivers a full 15.4 Watts of DC power on each of the eight PoE switch ports. PoE ports provide data connection and the power source (PSE) for such PoE PD devices as Wireless Access Points, VoIP phones and Network Cameras. The series includes a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other PoE features include Over-Current Protection and Under-Current Detection. The series is fully compatible with devices that comply with the IEEE 802.3af standard and it is capable of inserting power on the unused pairs of the MDI.
Specifications
•
IGMP v1 & v2
•
8-port 10/100 Base-TX plus 100Base-FX/1000 Base-X SFP or 10/100/1000 copper combo
•
8 ports with integrated PoE injectors
•
X-Ring Technology
•
IEEE Std. 802.3af Compliance
Standards
•
Full 15.4 Watts per port
Protocols CSMA/CD
•
PoE Legacy and Reverse Polarity Support
Technology
Store and Forward switching architecture
Transfer Rate
14,880 pps for 10 Mbps 148,800 pps for 100 Mbps 1,488,000 pps for Gigabit Fiber Ethernet Port
Connectors
10/100 copper: 8x RJ-45 with Auto-MDIX Fiber: Two dual speed SFP ports 100BASE-FX/1000 BASE-X
MAC Address
8K MAC address table
Network Cable
10BASE-T: 2-pair UTP/STP Cat. 3, 4, 5 cable; EIA/TIA-568 100-ohm (100 m) 100BASE-TX: 2-pair UTP/STP Cat. 5 cable; EIA/TIA-568 100-ohm (100 m)
Backplane
5.6 Gbps
Non-Blocking Architecture
•
IEEE 802.1p Class of service
•
IPv4 IP TOS and DiffServ QoS classification, IPv6 Traffic class with 4 queues per port
•
IEEE 802.1q VLAN, up tp 256 groups, VLAN tagging ID up to 4096.
•
Static MAC, 100 entries
•
IEEE 802.1x
•
RADIUS client
•
DHCP Client and Server, SNTP
•
Auto-MDI/MDIX
•
IGMP/GVR
•
Port Mirroring
•
8K MAC Address
•
Telnet/Web-Based management
•
TFTP Firmware Upgrade and configuration backup
Optional Accessories (sold separately) SFP Modules Mounting Brackets MIL-RMSM8TX 19“ Rack Mount Bracket. MIL-BRSM8TX Wall Mount Bracket
Features
•
Ordering Information MIL-SM8TXAF2GPA 8-port 10/100 PoE Remotely Managed switch with (2) SFP Combo ports Dual speed SFP ports (100/1000)
IEEE Std. 802.3 IEEE Std. 802.3u IEEE Std. 802.3x IEEE Std. 802.3ad IEEE Std. 802.1Q IEEE Std. 802.3ab IEEE 802.3z IEEE 802.3af IEEE Std. 802.1p IEEE Std. 802.1d IEEE Std. 802.1w IEEE Std. 802.1X
LEDs RJ-45 port: 10/100; Link/Activity; Full duplex/ Collision Fiber: Link/Activity Power: On/Off POE: PWR FWD
Features (Continued) Management features include port based, dynamic and static VLANs, GVRP, VLAN tagging, IGMP Snooping or querying, port mirroring, port security. Security includes static addressing, filtering and blocking of packets to identified MAC addresses. Four priority queues insure minimum delay for voice over IP or multimedia network data. Non-blocking 5.6 Gbps architecture assures rapid packet delivery while 8,000 MAC address table provides swift lookup and packet forwarding.
Power Supply Built-in AC power supply: AC 100~240V, 50/60 Hz, 200 Watts; Optional External AC/DC Power Supply 48 VDC Input Power Consumption
(DC) 20 Watts (Non-POE functions)
Environment
Operating: 0°C to 45°C Humidity: 10% – 90% (non-condensing)
Dimensions
Width: 11” [280 mm] Depth: 8.3” [211 mm] Height: 1.7” [44 mm]
Weight
5.7 lbs. [2.58 kg]
Compliance
Safety: UL, cUL Emissions: FCC Class A, CE Mark
Waranty
5 Year
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 16
SM8TAF2DPA Managed Gigabit PoE Switch 8-port 10/100/1000Base-T + (2) (100/1000) Dual Speed SFP ports
Ordering Information The SM8TAF2DPA is a 10-port Gigabit Ethernet smart switch providing 8-port 10/100/1000 IEEE 802.3af Power-Over-Ethernet capability, and it has 2 additional dual Speed SFP ports.
SM8TAF2DPA (8) 10/100/1000BASE-T PoE Ports + (2) 100/1000BASE-X SFP Includes 19” Rack Mount ears Optional Accessories (sold separately) SFP Modules
Features
Specifications
•
Support Jumbo Frame up to 9K bytes
•
Authentication – RADIUS 802.1x
•
Security - Support SSH/SSL
•
Port based or tagged (802.1Q) VLAN
•
Bandwidth Allocation
•
DHCP Snooping including option 82
•
LLDP (Link Layer Discovery Protocol)
Standards IEEE 802.3 IEEE 802.3u IEEE 802.3z, IEEE 802.3x IEEE 802.3ad IEEE 802.1D, • IEEE 802.1w IEEE 802.1s IEEE 802.1Q, • IEEE 802.1p, IEEE 802.1ad IEEE 802.1AB, IEEE 802.3af IEEE 802.3at
•
Port Mirroring
Protocols CSMA/CD
•
Port Security, MAC Filter/IP Filter
Technology
Store and Forward switching architecture
•
Loop detection and prevention
Connectors
8 10/100/1000 RJ-45 2 100/1000 SFP ports
MAC Address
8K MAC address table
Back Plane
20 Gbps
Dimensions
Width: 12.99” [330 mm] Depth: 8.03” [204 mm] Height: 1.69” [43 mm]
Weight
9 lbs. [4.82 kg]
Input Power
Internal power: 100-240VAC
Power-over-Ethernet
Maximum PoE power budget 75 Watts Maximum output power per port up to 30w Data-pairs mode Maximum current: 1.7A Provide power on all 8 copper ports
Environment
Operating: 0°C to 50°C Humidity: 10% – 90% (non-condensing)
Compliance
Safety: CSA certified Emissions: FCC Class A; CE
PoE Features •
Compliant with IEEE 802.3at PoE+
•
Compliant with IEEE 802.3af PoE
•
Supplier 53 – 58v DC power to PD
•
Provide up to 30w output for 2 ports or up to 15w output for 4 ports or up to 7.5w for 8 ports
•
Power Management: - Enable/Disable per port - Priority setting per port - Overloading Protection per port - Power Level setting per port
Features (Continued) Management: Web Management, Telnet, SNMP V1/V2c /V3 Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP). The trunk group up to 5 and maximum trunk port member up to 8 ports.
•
IGMP: Support IGMP Snooping V1/V2/V3, IGMP immediate leave
•
Quality of Service: Supports 8 egress queues per port enable differentiated management of up to 8 traffic types. Strict scheduling and WRR
•
Spanning Tree: Supports IEEE 802.1s MSTP,IEEE 802.1w RSTP and IEEE 802.1d STP
•
VLAN: Port Based VLAN, IEEE 802.1Q tag-based, QinQ, 4094 VLAN entries, Voice VLAN, Private VLAN
•
Firmware Update, configure backup/ restore through Web GUI
•
IP V6: Support IPV4/IPV6 dual protocol stack
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 17
SM8TAT2DPA Managed Layer 2 Gigabit PoE Switch 8-port 10/100/1000Base-T (2) 100/1000 SFP/RJ-45 ports
Ordering Information This switch is a high performance Layer 2 managed PoE Plus switch with 8 port 10/100/1000. Full IEEE 802.3af Power-Over-Ethernet capability with 2 additional RJ-45 (100/1000) SFP combo ports.
SM8TAT2DPA (8) 10/100/1000BASE-T PoE ports+ (2) 100/1000BASE-X SFP/RJ-45 ports Optional Accessories (sold separately) SFP Modules
Applications
Mounting Brackets
•
Secure and high performance connections
•
Flexible copper/fiber dual uplinks
•
Unified communications with open standard
RMSM8-01 19“ Rack Mount Bracket BRSM8-01 Wall Mount brackets
Features
Specifications
•
Support Jumbo Frame up to 9K bytes
•
Authentication – RADIUS 802.1x, TACACS+
•
Security - Support SSH/SSL
•
Port based or tagged (802.1Q) VLAN, QinQ double tag VLAN, Guest VLAN
•
Bandwidth Allocation Ingress and Egress
•
DHCP Snooping including option 82
Standards IEEE 802.3 IEEE 802.3u IEEE 802.3z, IEEE 802.3x IEEE 802.3ad IEEE 802.1D, IEEE 802.1w IEEE 802.1s • IEEE 802.1Q, IEEE 802.1p IEEE 802.1ad • IEEE 80.1AB IEEE 802.3af IEEE 802.3at
•
IP-MAC binding for security
•
ACL based on Ethernet Type / ARP / IPV4 for packets permit or deny, rate limitation and port copy
•
LLDP (Link Layer Discovery Protocol)
•
Syslog for device management
•
IEEE 802.3az Energy Efficiency LLDP
•
Compliant with IEEE 802.3af Power over Ethernet and IEEE 802.3at Power over Ethernet Plus
•
Advanced PoE Management functions
•
PoE detection mode, PoE Autocheck, PoE power delay and PoE Scheduling
•
Power cord safety clip is included
Features (Continued)
Protocols CSMA/CD Technology
Store and Forward switching architecture
Connectors
1 RJ-45 Console Port 8 10/100/1000 RJ-45 2 100/1000 SFP/RJ-45 ports
MAC Address
8K MAC address table
Back Plane
20 Gbps
Dimensions
Width: 11.02” [280 mm] Depth: 6.53” [166 mm] Height: 1.73” [44 mm]
Weight
6 lbs. [2.72 kg]
Input Power Internal power: 100-240VAC Power over Ethernet Maximum output power 130 watts 30 w for four-ports similtaneously 15.4 w for all eight ports similtaneously Environment
Operating: 0°C to 40°C Humidity: 5% – 90% (non-condensing)
Compliance
Safety: LVD Emissions: FCC Class A; CE
Management: Web Management, SNMP V1/V2c/V3, Telnet, CLI Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP).
•
IGMP: Support IGMP Snooping V1/V2/V3, IGMP Proxy and GVRP
•
Quality of Service: Supports 8 hardware queues with Strict priority and WRR . Per port bandwidth management
•
Spanning Tree: Supports IEEE 802.1s MSTP,IEEE 802.1w RSTP and IEEE 802.1d STP Compliant
•
VLAN: Port Based VLAN, IEEE 802.1Q tag-based, 4096 VLAN entries, MACbased VLAN, Private VLAN Edge， Priority VLAN override
•
Firmware Update, configure backup/ restore through Web GUI and TFTP
•
IP V6: Support IPV4/IPV6 dual protocol stack
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 18
SM24TAT4GPA Managed Gigabit PoE Switch 20) 10/100/1000Base-T ports + (4) SFP /RJ-45 Combo PortsSFP Port
Ordering Information
The SM24TAT4GPA is a high performance Web managed PoE switch with 24 auto-sensing 10/100/1000BASE-T RJ-45 ports, 4 of which are SFP/RJ-45 combo ports. It supports IEEE802.3at PoE Plus on all 10/100/1000 copper ports to enable the easy installation of PoE devices such as IP Phones and IP Cameras.
SM24TAT4GPA (20) 10/100/1000BASE-T (RJ-45) + (4)100/1000 SFP/RJ-45 ports, Web managed PoE Plus Switch (incudes 19” Rack Mount ears) Optional Accessories (sold separately) SFP Modules Mounting Brackets BRSM24-01 Wall Mount Bracket
Features
Specifications
•
Port based or tagged (802.1Q) VLAN, management VLAN
•
Jumbo frame up to 9KB
•
Port Mirroring
•
Loop Detection
•
Broadcast Storm Protection
Standards
IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.3x IEEE 802.3af IEEE 802.3at IEEE 802.3ad IEEE 802.1D IEEE 802.1w IEEE 802.1Q IEEE 802.1p
•
Power over Ethernet
Protocols
CSMA/CD
•
Comply to IEEE 802.3at PoE Plus
Technology
Store and Forward switching architecture
•
Comply to IEEE 802.3af PoE
Connectors
• •
Features (Continued) •
Management: Web Management, SNMP
•
24 10/100/1000 RJ-45 4 Giga SFP ports
Port Trunk: Supports static port trunk up to 12 groups with 24 ports per group
•
IGMP: Support IGMP Snooping V1/V2c
Maximum output power per port 30W PoE budget : 370W
MAC Address
8K MAC address table
•
Back Plane
4 100/1000 SFP ports
30W PoE per port available to 12 ports 15.4W PoE per port available to all 24 ports
Buffer 500Kbps
Quality of Service: Supports 8 hardware queues, Queue assignment based on DSCP and 802.1p COS. Classification: Port based, 802.1p VLAN priority based, DSCP based; Diffserv
•
Spanning Tree: Supports IEEE 802.1w RSTP and IEEE 802.1d STP
•
Green Ethernet: Support IEEE 802.3az Energy Efficient Ethernet
Dimensions
Width: 17.4” [442 mm] Depth: 8.31” [211mm] Height: 1.7” [44 mm]
Weight
9.15 lbs. [4.15 kg]
Input Power
Internal power: 100-240VAC
Power Consumption
16 Watts maximum (without PoE)
Power over Ethernet Maximum PoE budget 370 Watts 30w for 12 ports simultaneously 15.4w for 24 ports simultaneously Environment
Operating: 0°C to 40°C Humidity: 10% – 90% (non-condensing)
Compliance
Safety : LVD Emissions: FCC Class A; CE
Warranty
Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 19
SM24TAT4XA Managed Gigabit PoE+ Switch 24-port 10/100/1000Base-T + (4) 1G/10G SFP+ Ordering Information This SM24TAT4XA is a high performance managed switch with 128 Gbps switching capacity. It provides (24) 10/100/1000 copper ports with IEEE 802.3at PoE Plus capability, and it has additional (4 )1G/10G dual speed SFP+ slots to support up to (4) 10G uplinks.
SM24TAT4XA Managed PoE Switch (24) 10/100/1000BASE-T + (4) 1G/10G SFP slots (incudes 19” Rack Mount ears) Optional Accessories (sold separately) SFP Modules Mounting Brackets BRSM24-01 Wall Mount Bracket
Features •
Supports Jumbo Frame up to 9K bytes
•
Authentication – RADIUS 802.1x, TACACS+
•
Security - Support SSH/SSL
•
Rate limiting: Ingress policer, egress shaping and rate control; per VLAN, per port and flow based
•
DHCP Relay including option 82
•
ACL: based on source and destination MAC / VLAN ID/ IP address / Protocol / port / DSCP / IP Precedence / TCP/UPD source and destination ports / 802.1p / Ethernet type / ICMP packets / IGMP packets / TCP flag
•
LLDP (Link Layer Discovery Protocol)
•
IEEE 802.3az Energy Efficiency
•
IP Source Guard, Port Security
PoE Features
Specifications Standards IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.3ae IEEE 802.3x IEEE 802.3ad • IEEE 802.1D IEEE 802.1w IEEE 802.1s • IEEE 802.1Q IEEE 802.1v IEEE 802.1p IEEE 802.1ad IEEE 802.1AB • IEEE 802.3af IEEE 802.3at
Features (Continued)
Protocols CSMA/CD Technology
Store and Forward switching architecture
Connectors
1 DB-9 Console Port 24 10/100/1000 RJ-45 4 1G/10G SFP+ slots
MAC Address
32K MAC address table
Memory Buffer
4Mbits
Back Plane
128 Gbps
Dimensions
Width: 17.40” [442 mm] Depth: 15.15” [385 mm] Height: 1.73” [44 mm]
•
Compliant with IEEE 802.3at PoE+
Weight
9.6 lbs. [4.35 kg]
•
Compliant with IEEE 802.3af PoE
•
802.1AB LLDP-MED Configuration
Input Power
Internal Power: 100 - 240VAC Power consumption : 50 Watts maximum (without PoE)
•
Power delay and PoE Scheduling
Power over Ethernet
Maximum PoE budget 370 Watts 30 w for 12 ports simultaneously 15.4w for 24 ports simultaneously
•
Auto PoE Reset (APR)
Environment
Operating: 0°C to 40°C Humidity: 10% – 90% (non-condensing)
Compliance
Safety : LVD Emissions: FCC Class A; CE
Management: Web Management, SNMP V1/V2c/V3, Telnet, CLI Port Trunk: Supports IEEE 802.3ad port trunk with link aggregation control protocol (LACP). Supports up to 14 groups with 8 ports per group. IGMP: Supports IGMP Snooping V1/V2/ V3, GVRP, IGMP Proxy, IGMP Querier and MLD snooping V1/V2
•
Quality of Service: Supports 8 hardware queues, Strict priority and WRR . Queue assignment based on DSCP and 802.1p CoS; IPV4/IPv6 precedence/ Type of Service / DiffServ / classification and remarking ACLs, trusted QoS
•
Spanning Tree: IEEE 802.1s MSTP, IEEE802.1w RSTP and IEEE 802.1d STP Compliant
•
VLAN: Port Based VLAN, IEEE 802.1Q tag-based, up to 4k VLAN entries, QinQ, MAC-based VLAN, Private VLAN Edge, Management VLAN, Voice VLANs
•
Firmware Update, configure backup/ restore through HTTP/TFTP/Console
•
IP V6: Supports IPV4/IPV6 dual protocol stack
•
Hardware stacking capability with 10G SFP+ cable
Warranty Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 20
SISPM1040-182D-LRT
Managed Hardened Fast Ethernet Switch
(8) 10/100Base-TX PoE Ports and (2) 10/100/1000Base-T or 100/1000Base-X SFP Combo Ports
Ordering Information
The SISPM1040-182D-LRT is a managed PoE switch suitable for connecting and powering devices in challenging environments. The two gigabit speed combo ports provide the ultimate flexibility by allowing copper or fiber SFP uplink ports. The two uplink ports can also be used in a redundant ring for maximum network reliability. The switch has a PoE power budget of 120 watts, provides up to 15.4 watts per port on all ports simultaneously, has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +65°C.
SISPM1040-182D-LRT (8) 10/100BASE-TX (RJ-45) [100 m/328 ft.] with (2) 10/100/1000BASE-T (RJ-45) or 100/1000BASE-X SFP Combo ports Optional Accessories (sold separately) SFP Modules External AC/DC Power Supply 25080 48~53 VDC 120W
Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
25105 48~55 VDC 120W (See page 23 for details)
Features
Specifications
•
DIN rail Connector
•
Auto-MDI/MDIX
•
IEEE 802.3af POE on (8) 10/100TX ports
•
SFP ports support 100/1000Base-X Dual Speed
•
Store-and-Forward Switching Architecture
Standards IEEE 802.3 • IEEE 802.3u IEEE 802.3ab • IEEE 802.3z IEEE 802.3x • IEEE 802.3ad IEEE 802.3af IEEE 802.1d • IEEE 802.1w IEEE 802.1p IEEE 802.1Q VLAN • IEEE 802.1x IEEE 802.1ab LLDP
•
Back-plane (Switching Fabric): 16 Gbps
•
1Mbits Packet Buffer
•
8K MAC Address Table
•
Dual, Redundant, Auto-sensing Power Supply Inputs
Features (Continued)
PoE Pin Assignment
RJ-45 port # 1~# 8 support IEEE 802.3af End-point, Alternative A mode. Per port provides 15.4W ability. Positive (VCC+): RJ-45 pin 1,2. Negative (VCC-): RJ-45 pin 3,6.
Protocol
CSMA/CD Power (Green), Power 1 (Green), Power 2 (Green), Fault (Red), Master (Green), FWD (Green) 8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow) SFP port: LNK/ACT(Green), 1000T: LNK/ACT(Green), 1000M(Green)
•
Power Polarity Reverse Protect
•
Overload Current Protection
LED Per unit:
•
Dry Contact Relay Output
Input Power
48 VDC; redundant inputs (removable terminal block), additional barrel connector
•
Port Based VLAN
Power Supply
External Power Supply: DC 48V, Redundant power DC 48V, removable terminal block
•
802.1 Q Tag VLAN
•
GVRP
Power Consumption
16 Watts (without PoE) 136 Watts (full PoE)
Environment
Operating: -40°C to 65°C Humidity: 5% – 95% (non-condensing) Storage: -40°C to 85°C
Dimensions
Width: 2.8” [72 mm]; Depth: 4.1” [105 mm]; Height: 5.9” [152 mm]
Weight
4.0 lbs. [1.81 kg]
Ingress Protection
IP-30
Compliance
Safety: UL, cUL, CE EN60950-1 Emissions: FCC Class A Immunity: EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61000-4-12, EN61000-6-2, EN61000-6-4, IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Warranty
Lifetime
Port Trunk with LACP QoS (Quality of Service) IEEE 802.1p Class of Service,Per port provides 4 priority queues Port Based, Tag Based and Type of Service Priority Port Mirror
•
Monitor traffic in switched networks.
•
Port Sercurity : MAC address entries/ filter
•
IP Security : IP address security management to prevent unauthorized intruder
•
Login Security IEEE 802.1X/RADIUS
•
IGMP Query mode for Multi Media Application
•
Support multicast filter X-Ring
•
Support X-ring, Dual Homing, Couple Ring and Dual Ring Topology. Provide redundant backup feature and recovery time below 20 ms
•
Serial Console Port
•
SNMP v1 v2c, v3/Web/Telnet/CLI
•
DHCP Client/DHCP Server
•
TFTP Firmware Upgrade
•
TFTP Configuration Backup/Restore
•
Ipv4/IPv6 dual-stack
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 21
SISPM1040-382-LRT
Managed Hardened Fast Ethernet Switch (8) 10/100Base-TX PoE+ Ports and (2) 10/100/1000Base-T or 100/1000Base-X SFP Combo Ports The SISPM1040-382-LRT is a managed PoE switch suitable for connecting and powering devices in challenging environments. The two gigabit speed combo ports provide the ultimate flexibility by allowing copper or fiber SFP uplink ports. The two uplink ports can also be used in a redundant ring for maximum network reliability. The switch has a PoE power budget of 240 watts, provides up to 30 watts per port on all ports simultaneously, has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
Features
Specifications
•
Store-and-Forward Architecture with 5.6 Gbps Switching Bandwidth
•
Dual, Redundant 50~57V DC Power Inputs with Current Overload Protection
•
6 PIN Terminal Block input power connections
•
Fault Output Relay rated 1A 2t 24VDC
•
8 ports of P.S.E., providing up to 30 Watts per port
Standards
IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.3ab IEEE 802.3x IEEE 802.3ad IEEE 802.1D IEEE 802.1p IEEE 802.1Q IEEE 802.1w IEEE 802.1s IEEE 802.1AB IEEE 802.3at
Status LEDs
Power, Ring, Ring Master, Fault, Port Link/Act, Port PoE
Dimensions
Width: 2.93” [74.3mm] Depth: 4.3” [109.2 mm]; Height: 6.06” [153.6 mm]
Weight
2.6 lbs. [1.185 kg]
•
DIN Rail and Wall Mount Brackets Included
•
Extended operating temperature (-40°C to 75°C)
•
Redundant Ring with recovery time less than 10ms over 250 units
Optional Accessories (sold separately) SFP Modules External AC/DC Power Supply 25104 48~55 VDC 240W (See page 23 for details)
Features (Continued)
Input Power 50~57 VDC; redundant inputs, 6-PIN Terminal Block Power Consumption
7.68 watts (without PoE), 250 watts (full PoE)
Environment
Operating: -40°C to 75°C Humidity: 5% – 95% (non-condensing ) Storage: -40°C to 85°C
Ingress Protection
IP 30
Compliance Safety: EN60950-1 Emissions: FCC Class A Immunity: EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) Warranty
Ordering Information SISPM1040-382-LRT (8) 10/100BASE-TX PoE+ [100 m/328 ft.] with (2) Gigabit Combo SFP ports
Lifetime
•
STP/RSTP/MSTP (IEEE 802.1D/w/s)
•
TOS/DSCP
•
QoS Quality of Service (802.1p)
•
VLAN with VLAN Tagging and GVRP (802-1Q)
•
MVR (Multicast VLAN Registration) support
•
IGMP v2/v3 (IGMP Snooping)
•
IP-based bandwidth management
•
Port configuration, status, statistics, monitoring, security
•
SNTP for synchronizing of clocks over network
•
PTP Client (Precision Time Protocol) clock synchronization
•
System Alarms via SYSLOG / SNMP / Trap / Fault Output Relay
•
LLDP protocol
•
DHCP Client/Server
•
Port based network access control (802.1x)
•
SSH Security
•
RADUIS centralized password management
•
SNMPv3 encrypted authentication and access security
•
Web / SNMP v1, v2c, v3 / Telnet / CLI SSL/HTTPS device management
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 22
SISPM1040-384-LRT Managed Hardened Gigabit Ethernet Switch (8) 10/100/1000Base-TX PoE+ Ports and (4) 1000Base-X SFP Ports Ordering Information The SISPM1040-384-LRT is a managed Gigabit PoE switch suitable for connecting and powering devices in challenging environments. The gigabit speed SFP ports provide the ultimate flexibility when used with SFP modules that best meet network requirements. The uplink ports can also be used in a redundant ring for maximum network reliability. The switch has a PoE power budget of 240 watts, provides up to 30 watts per port on all ports simultaneously, has redundant input power connections, and a fault alarm relay to ensure safe reliable operation in temperatures between -40⁰C and +70⁰C. Transition Networks’ hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments.
Features
Specifications
•
Standards
IEEE 802.3 IEEE 802.3u IEEE 802.3z IEEE 802.3ab IEEE 802.3x IEEE 802.3ad IEEE 802.1D IEEE 802.1p IEEE 802.1Q IEEE 802.1w IEEE 802.1s IEEE 802.1AB IEEE 802.3a
Status LEDs
Power, Ring, Ring Master, Fault, Port Link/Act, PoE Power injected
Dimensions
Width: 3.8” [96.4 mm]; Depth: 4.27” [108.5 mm]; Height: 6.06” [154 mm]
Store-and-Forward Architecture with 24 Gbps Switching Bandwidth
•
8 ports of P.S.E., providing up to 30 Watts per port
•
Supports Jumbo frames up to 9K Bytes
•
Redundant Ring with recovery time less than 20ms over 250 units
•
IGMP v2/v3 for filtering multicast traffic
•
SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management (256 VLANs)
Optional Accessories (sold separately) SFP Modules Industrial Power Supplies: 25104 48~55 VDC 240W (See page 23 for details)
Features (Continued)
•
ACL and 802.1x User Authentication
Weight
3.06 lbs. [1.38 kg]
•
Supports LLDP Protocol
Input Power
50 VDC; redundant inputs
Fault Relay
1A at 24 VDC capacity
•
SSH/SSL Security
Serial Console
RS232 in RJ45 (Cable Supplied)
•
Advanced IP-based Rate Limiting
Power Consumption
20 watts (without PoE)
•
Extended operating temperature (-40°C to 70°C)
Environment
Operating: -40°C to 70°C Humidity: 5% – 95% (non-condensing ) Storage: -40°C to 85°C
•
Dual, Redundant 50V DC Power Inputs with Overload Current Protection
Ingress Protection
IP 30
•
DIN Rail and Wall Mount Brackets Included
Compliance Safety: EN60950-1 Emissions: FCC Class A Immunity: EN61000-4-2, EN61000-4-3, EN-61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) Warranty
SISPM1040-384-LRT (8) 10/100/1000BASE-TX PoE+ [100 m/328 ft.] with (4) Gigabit SFP ports
•
STP/RSTP/MSTP (IEEE 802.1D/w/s)
•
TOS/Diffserv supported
•
Quality of Service (802.1p) for realtime traffic
•
VLAN (802.1Q) with VLAN tagging and GVRP supported
•
IGMP v2/v3 (IGMP Snooping)
•
IP-based bandwidth management
•
Application-based QoS management
•
DOS/DDOS auto prevention
•
Port configuration, status, statistics, monitoring, security
•
System Alarms via SYSLOG / SNMP Trap / Fault Output Relay
•
DHCP Client/Server
•
Port based network access control (802.1x)
•
Web / SNMP v1,v2c,v3 / Telnet / CLI device management
•
Radius centralized password management
•
SNMPv3 encrypted authentication and access security
Lifetime
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 23
POWER SUPPLIES
25083 Product
25105
25104
25079
25080
SPS-UA12DHT
Primary Power Supply
Primary Power Supply Details
Secondary Power Supply
Secondary Power Supply Details
M/E-ISW-FX-01xxx(xx) SISTG10xx-211-LRT SISTF1010-2xx-LRT SISTF10xx-241-LRT SISTF1040-162D-LRT SISTM1040-262D-LRT SISTM1040-262E-LRT SISTM10xx-1xx-LRT SISGM1040-244-LRT SISGM1040-262x-LRT
25083
Input 85-264 VAC, 120-370 VDC Output 10.8~13.2 VDC, 2A, 24W
SPS-UA12DHT
Input 90~264 VAC Output 12 VDC, 1.3A 18W
SISTP10xx-141-LRT SISTP1040-242-LRT SISPM1040-182D-LRT
25105
Input 110 VAC, 220 VAC Output 48~55 VDC, 2.5A, 120W
25080
SISPM1040-382-LRT SISPM1040-384-LRT
25104
Input 85-264 VAC, 124-370 VDC Output 48~55V, 5.0A, 240W
IND-328x-L
25080
Input 88-132VAC, 176-264VAC, 248-370VAC by switch Output 48~53 VDC, 2.5A 120W
25079
Input 88-132VAC, 176-264VAC, 248-370VAC by switch Output 24~28 VDC, 5.0A 120W
SI-IES-1200-LRT SI-IES-111D-LRT
25130
SI-IES-121D-LRT
SDSTX3110-121-LRT SDSTX3110-124-LRT SDSFX3113-111-LRT SDSFX3114-111-LRT
SISTP1010-380-LRT
Input 88-132VAC, 176-264VAC, 248-370VAC by switch Output 48~53 VDC, 2.5A 120W
25105
Input 110 VAC, 220 VAC Output 48~55 VDC, 2.5A, 120W
Input 85~264VAC, 120~370VAC Output 48VDC, .83A, 39.8 Watts
25131
Input 88~264VAC, 124~370VAC Output 48-55VDC, 1.6A, 76.88 Watts
25131
Input 88~264VAC, 124~370VAC Output 48-55VDC, 1.6A, 76.88 Watts
25105
Input 120~220VAC, Output 4855VDC, 2.5A, 120 Watts
25135
Input 85~264VAC, 120~370VAC Output 24VDC, .42A, 10 Watts
25130
Input 85~264VAC, 120~370VAC Output 48VDC, .83A, 39.8 Watts
Transition Networks, Inc. +1.952.941.7600
[email protected] www.transition.com 24
25
NORTH AMERICA Worldwide Headquarters United States tel: 952.941.7600 toll free: 800.526.9267 fax: 952.941.2322
Canada
tel: +1 952.996.1550 fax: +1 952.941.2322
EUROPE
LATIN AMERICA
ASIA
EMEA / European Headquarters
Mexico / Central America / Caribbean
Japan / Korea
tel: +1 952.996.1512 fax: +1 952.941.2322
tel: +81 3 5403 6470 fax: +81 3 5403 6471
South America
Southeast Asia / Hong Kong / India
tel: +44 (0) 1428 752 955 fax: +44 (0) 1428 752 901
tel: +54 11 4554 8076 fax: +1 952.941.2322
Brazil tel. +55-11-98244-7630 fax: +1 952.941.2322
part: 902015POE
tel: +65 9736 8385 fax: +1 952.941.2322
