Transcript
POE-SPLIT_5/9/12 100M/1GIG PoE Splitter Output: 5V/9V/12V Input: DC48V/IEEE802.3af /15.4W Support 10/100/1000mbps Power in support: 1236 pin/4578 pin
Product Overview: The 5/9/12V Power over Ethernet Splitter splits a networked PoE signal into separated power and 100M or 1Gig LAN data sources. This device allows administrators to run 100M or 1Gig speed PoE cables over long distances and then split the PoE signal into separated data and power sources in order to network non-PoE devices. Save installation and equipment cost when installing access points, IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Gigabit speeds.
Features: Automatically detects PoE terminals and supplies inline power. Detects if PoE is pins 1236 or 4578 Compatible with 100meg or 1gig LAN Easily install non-PoE devices where a power outlet is not available Solwise Ltd, www.solwise.co.uk,
[email protected]
Reduce installation and network equipment costs Safeguards network device with short circuit protection Adjustable output DIP switch for 5V, 9V, or 12V DC delivery Converts Non-PoE devices to Power Over Ethernet Support Auto-sensing power drawn from 802.3af power source equipment (PSE) devices Supplies power up to 10-12 watts at 5, 9 or 12V DC Light weight and compact size 1-Year Warranty Specification Data Rate :10/100/1000 Mbps Input Power Requirement: 1/2(+),3/6 (–) or 4/5(+),7/8(-) Input Power Voltage: 48Vdc/0.3A, Output Power: 5V(2A),9V(1.1A),12V(1A) Jumper Cable: DC 2.1x5.5x 9.5mm, (L-300mm) Dimensions: 80 mm x 55 mm x 31 mm Weight 76g Diagnostic LEDs: DC Power (Green) Connectors: Shielded RJ-45, EIA 568A and 568B Environmental Conditions : Operating Ambient Temperature: -10 to 45 degrees Regulatory IEEE 802.3af Compliance RoHS Compliant , CE
Solwise Ltd, www.solwise.co.uk,
[email protected]
