Transcript
POE30-24
Power-Over-Ethernet Amplifier
QUICK INSTALL GUIDE
Step #1
- Connect coaxial cable from "ANT" connector to antenna. - Connect coaxial cable from "A P" connector to radio.
www.renasis.com
fro m PO E r a d io
Step #2
- Connect ethernet cable from POE-capable radio to either port on the POE30-24.
POWER IN
- Connect ethernet cable from POE30-24 (unused port) to EBU-101 (or -102) injector. * NOTE: Cisco radios require EBU-102
1 - POE30-24 Amplifier 1 - EBU-101 -or- EBU-102 DC Injector 1 - 48V, 1A Power Supply
P + DATA OUT
d a ta so u rc e
- Connect ethernet cable from EBU-101 (or EBU-102) injector to data source (switch, etc.)
P + DATA OUT
t o PO E30 a m p lif ie r
t o PO E30 a m p lif ie r
DATA IN
to d a ta s o u rc e
Step #4
Step #3
Included in POE30-24 Kit:
POWER IN
DATA IN
fro m PO E in je c t o r
Product Specifications: Please visit the following URL for complete product specifications: http://www.renasis.com/products-Amps.php
Warranty / Return Policy: Step #5
- Connect 48V power supply to power source (wall plug).
Step #6
- Connect 48V power supply to EBU-101 (or EBU-102) injector.
Please visit the following URL for full Warranty / Return Policy information: http://www.renasis.com/products/Warranty.pdf
