Poer-301 802.3at/af Poe Extender

Transcript

POER-301 802.3at/af POE Extender Green IEEE 802.3at/af POE Extender ( or POE Repeater) Highlights  1-port POE in( detected as IEEE802.3af or IEEE802.3at by DIP-Switch) and 1-port POE out  Extending distance for another 100M per extender(200m)  300M(2 extender required)  Support IEEE802.3at and IEEE802.3af  No Extra power required  Power saving design(802.3az)  Metal case POER-301 is 2-port PoE Extender (1-port PoE IN and 1-port PoE Out) that is designed for extending distance for another 100M per extender and cascading for longer distances via Cat.5 cable. It is powered by PoE switch or PoE injector without extra power required. POER-301 can be selected by DIP-Switch as 802.3at to get 25 watt from upper POE source or as 802.3af to receive 12.95 watt from upper POE source. st NOTE: PD required power at 200m distance must be >= 30 watt or 15.4 watt power source minus power loss in 1 100 copper line minus POE Extender’s power consumption minus power loss in 2 nd 100m cooper line Key Features   IEEE 802.3at / 802.3af Power over Ethernet Compliant Supports two 10M/100M auto-detect Half/Full duplex switch ports with TX interfaces.  Built-in 96K Byte SRAM buffer memory.  Supports 2K MAC addresses entry tables with 4-ways associative hash algorithm  Supports Store & Forward architecture and performs forwarding and filtering at non-blocking full wire speed.  Supports 802.3x Flow Control pause packet for Full Duplex in case buffer is full.  Supports Back Pressure function for Half Duplex operation in case buffer is full.  Supports packet length up to 1522 (Default) / Maximum 1536 bytes.  Broadcast/ Multicast Storm suppression.  Supports buffer allocation with 512 bytes per block  Supports per port Single/Dual color mode with Power On auto diagnostic.  Two Port RJ-45 interfaces, One Data+Power input and One Data+Power output  Provide power over RJ-45 Ethernet cable to devices with Ethernet Port  Auto-detect PoE equipment, IEEE802.3at or IEEE802.3af ( Class 1-4 ) selected by DIP-Switch, protecting the device from being damaged by incorrect link  Remote support port up to 100M from PSE port  Support multiple repeaters to multiple 100M Ethernet distance and supply PoE+ power into the PD device.  Strong and digit metal case  Power saving design, keep less power over RJ45 cable until PD device request  LED indicators for Power LED and PoE function enable Technical Specifications Standards IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3X IEEE 802.3at Power Over Ethernet (PoE+) IEEE 802.3af Power Over Ethernet (PoE ) Features Number of Ports: 1 *RJ-45 Connector : Data+ power input port 1 * RJ-45 Connector: Data+ power output port Data Transfer Rate Ethernet: 10Mbps/Half-Duplex 20Mbps/Full-Duplex Fast Ethernet: 100Mbps/Half-Duplex 200Mbps/Full-Duplex Transmission Media 10BaseT Cat. 3, 4, 5 UTP/STP, up to 100 m 100BaseTX Cat. 5 UTP/STP, up to 100 m Led Indicators Per Port: Input: PoE power in, Link/Act, Output: PoE power out, Link/Act DIP Switch As 802.3at or 802.af to upper POE source Power Consumption 3 Watts (Max) Dimensions 94*70.5*26mm (L x W x H) metal Weight 230g Operating Temperature 0 to 45℃ Storage Temperature -20 to 90℃ Humidity 10 to 90% RH (non-condensing) Certifications FCC Class B, CE