Transcript
Pa th
.c om
Model 72932 Type N Adapter Kit
Features:
Te st
All 12 adapters in kit are direct. No intermediate couplers. Reduced signal loss in adapters due to absence of couplers. Kit includes the most frequently used N Type adapters including N / N, N / SMA, N / BNC, and N Terminations, both 50 and 75 ohm. See complete list in drawing or in table below. Rugged, lockable, pistol-grip case. All parts precision machined brass with tarnish resistant gold or nickel plating. Male center pins are gold plated brass. Female contacts are gold plated heat treated beryllium copper. Insulation material is high density PTFE.
Order Example: 72932 (N Adapter Kit)
All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (
[email protected]) For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094642, D1094540
Page 1 of 2
Model 72932 Type N Adapter Kit
2 3 4 5 6 7 8 9 10 11
female/female/female
SMA female/ TYPE N female SMA male/TYPE N female SMA female/TYPE N male
NOM. IMPEDANCE
FREQ. RANGE
VSWR
OPERATING TEMP
3843
50 Ohms
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
4240-75
75 Ohms
DC to 500 MHz
1.35 at 500 MHz
- 65 to +165 C
4240-50
50 OHMS
DC to 500 MHz
1.35 at 500 MHz
- 65 to +165 C
3841
50 Ohms
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
3535
50 Ohms
3288
50 Ohms
4286
50 Ohms
3842
50 Ohms
DC to 4 GHz
1.35 to 4 GHz
- 65 to +165 C
DC to 4 GHz
- 65 to +165 C
DC to 18GHz
1.35 to 4 GHz 1.25 Max at 18GHz
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
- 65 to +165 C
5089
50 Ohms
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
4299
50 Ohms
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
4298
50 Ohms
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
4297
50 Ohms
DC to 11GHz
1.35 to 11GHz
- 65 to +165 C
Te st
12
TYPE N female/male RA TYPE N Terminator plug TYPE N Terminator plug TYPE N female/female BNC male/ TYPE N female BNC female, TYPE N male SMA Termination male TYPE N male/ TYPE N male TYPE N
Pomona Part Number
.c om
1
Description
Pa th
Item
All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (
[email protected]) For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094642, D1094540
Page 2 of 2
