PORTABLE HAND-CRANKED USB CHARGER FOR SMARTPHONE 4000mAh High Capacity Li-ion battery
2 USB
Output Ports
500X
Rechargeable
• USB Portable Power Supply with Li-ion Rechargeable Battery for Smartphones & other USB Powered Devices
• Unique Hand-cranked Power Input for Outdoor & Emergency Use • Compact & Light-weight Design for Carrying Convenience
Charge the battery pack by Hand-Cranking The new Sony’s Portable USB Battery Pack (CP-A2LKS) comes with an AC charger that can be plugged into an power outlet and a manual charger with a handle for cranking, allowing you to power your smartphones or other devices via USB. The new manual charging mechanism provides an extra source of energy on-the-go or in emergencies, besides offering the enviromentally conscious option to use power you generate yourself.
On-the-go
At home
Use a wall outlet to charge the USB battery pack via the AC charger
Take the hand-cranked charger and USB battery pack with you for manual charging
CP-A2LKS Specifications AC input module Input AC Dimensions (W/H/L) Weight Approx. Operating Temperature USB output module
CP-2L
Kinetic input module
CP-K 4.1 V/500 mA (2 times rotations per a minute) 58 x 92.1 x 48.2mm 126g 0°C – 35°C
Output DC
Charge your smartphone
with Sony’s USB Portable Power Supply
EXTRA RUN TIME*
Dimensions (W/H/L) Weight Approx. Operating Temperature
Charging Time Built-in Battery
Phones
Xperia Samsung HTC iPhone® BlackBerry® TM
5~14 hrs
MP3
Walkman iPod® , iPadTM
®
3~60 hrs
CP-A 110V-240V, 50-60Hz 58 x 56 x 21.5mm (except power plug) 45g 0°C – 35°C
Games PSP
®
Digital Camera
Cyber-shot®
Video Camera
Handycam®
(
3.6V Typ. 2,000 mAh Min. 1,900 mAh
Charging Time
) x2
Supply Time* USB Output Port
5~35 hrs
3~5.5 hrs
0.5~3 hrs
Approx. 5 hours
2 USB Output ports total: 1 A (Max.)
Supply Time Approx. 120 minutes
* Compatible application are dependent on models, software & software’s versions.
* Supply time varies depending on battery condition, storage condition and portable device.
TO CHECK REMAINING BATTERY CAPACITY*
* The USB output indicator flashes and power supply is stopped if the combined output of the two USB output ports exceeds 1 A. Check that the required input current of the connected device(s) does not exceed 1 A. If two devices are connected, disconnect one of the portable devices from its USB output port and restart.
Press the button on the USB output module. You can check the remaining battery capacity by the number of remaining battery capacity indicators. Status of LED Indicator 4 indicators turn on 3 indicators turn on 2 indicators turn on 1 Indicator turns on Does not turn on
Remaining Battery Capacity Full Almost full Medium Low Empty
* The USB output module is out of power if no indicators turn on. Charge the USB output module via the AC input module. * Battery capacity cannot be checked when the USB output module is being charged by the AC input module, or supplying power to a portable device.
• You can turn the handle clock-wise or anti-clockwise. • When the handle is turned, orange lights will first blink and the handle becomes heavier to start charging. • Please turn 120 cycles in 1 minute. Fast turns will not accelerate the speed of charging. • 3 minutes turn provides approximately 1 minute smartphone talk. • You cannot use smartphone while charging. Action
Safety Function 1. Overcharge Prevention 2. Short Circuit Protection
How to recharge the device by hand–cranking
3. Abnormal Temperature Detection 4. Safety Timer
Hand Cranking Time
Smartphone 1 min talk
Approx. 3 minutes
Smartphone 1 min web browsing
Approx. 5 minutes
For more enquiries, please contact us at www.sony-asia.com/section/contactus.