Transcript
Portable Mobile Speaker This manual covers the operating instructions and troubleshooting for the Portable Mobile Speaker. Please read the manual carefully before use. 1. Welcome The MYBAT Portable Mobile Speaker makes it easy to take your music wherever you go. It is compact, easy-to-carry and simple to use – making it the perfect companion for traveling or outdoor activities. The speaker offers perfect sound quality and can be used with computers, digital media players and mobile phones.
2. Function Overview The Portable Mobile Speaker can be used to: •
Play MP3 music
•
Transmit FM radio
•
Listen to music using standard earphones with 3.5mm jacks
•
Play music from mobile phones, computers or media players
3. Buttons and Functions
(1). VOL+: Push once to increase the volume level. (2). VOL-: Push once to decrease the volume level. (3).
: Push and hold the button for 1 second to scan through 1 radio station at a
time or push one time to reverse to the previous song.
(4). USB/SD/FM: Push and hold the button to switch to different sources (Radio/USB/Micro SD) or push one time to scan for radio stations while in radio mode. (5).
: Push and hold the button for 1 second to scan through 1 radio station at a
time or push one time to fast forward to the current song. (6). USB port: Is to be use for music playing through the flash drive storage. (7). ANT: Connect any 3.5 mm jack to act as a radio antenna in order for the speaker to receive radio stations signal. (8). 3.5mm jack port: Is use to connect any electronic devices (Smartphone, Computer, Laptop, Tablet). (9). Micro SD: Insert a micro SD card to play music through the SD source. (10). ON/OFF Switch: Switch the button to the left side to turn it ON and switch it to the right side to turn it OFF. (11). DC-5V: Connect the 3.5 mm charging cable to this port to begin charging the portable speaker. (12). LINE IN: Allow the user to connect other music sources such as a smartphone, computer, laptop, iPod, iPad and portable music player. Just use the 3.5mm extension cable that we've provided along with the portable speaker packaging to playing music from an external source to the portable speaker.
4. Low Power and Charging the Speaker When the power is low, the speaker will power off automatically. To charge, use the provided 3-in-1 cable mini USB connector to connect the mini USB port located on the portable speaker and connect the USB 2.0 (type A) to a power source (PC/laptop/USB AC wall outlet) to begin charging the portable speaker. The indicator light will flash during charging. When the charge is full, the light will remain on.
5. Troubleshooting Speaker power off automatically - If speak powers off after startup, the battery might be low. Charge the speaker until it has enough power to operate. For a full charge, please use after 2 hours of charging. Music does not play – While using the MP3 mode and music does not play, it may be that the saving path of the file cannot be identified by the speaker. Save the files into the disk’s root folder then try again. No sound – Check the volume to make sure it is turned up or the battery may be low. Charge the speaker until it has enough power to operate.
No sound when connected to a computer – Ensure the cables are connected correctly. Disconnect then reconnect to computer. Button is nonresponsive – Restart the speaker.
6. Technical Specifications Output Power: 3W(RMS) Frequency Effect: 100Hz-18KHz Signal to Noise: 95dB Input Power: direct current DC5V 500mA
