Portsmouth Codes And Standards Two-handle Bar Sink Faucet Model Number:

Transcript

PORTSMOUTH® TWO-HANDLE BAR SINK FAUCET MODEL NUMBER: 4285.420 Bar Faucet 4285.420.F15 Bar Faucet 7" (180mm) 12-1/2" (320mm) 8-1/2" (217mm) 8-1/2" (217mm) 3-3/4" (96mm) 1-3/8" - 1-1/2" (35mm - 38mm) DIA. MOUNTING 1" HOLES (2) (25mm) 2-1/8" (54mm) 1/2"-NPSM 4" (102mm) 6-1/8" (156mm) GENERAL DESCRIPTION: PRODUCT FEATURES: Durable brass construction. 1/4 turn washerless ceramic disc valve cartridges. One-half inch male inlet shanks with brass coupling nuts. Brass swivel spout (360˚ rotation). Brass escutcheon plate. 2.2 gpm/8.3 L/min. maximum flow rate, 1.5 gpm/5.7 L/min, maximum flow rate for F15 models. Brass Construction & Cast Brass Waterway: Durable - Excellent in high use applications. Ideal for prolonged contact with water. Ceramic Disc Valve Cartridges: Assures a lifetime of drip-free performance. Lead Free: Faucet contains ≤ 0.25% total lead content by weighted average. Choice of finishes: Available in a wide range of durable finishes. SUGGESTED SPECIFICATION: Two handle bar sink faucet shall feature brass construction with all brass inlet shanks and coupling nuts. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Fitting shall be American Standard Model # 4285.420.____.____. © 2014 AS America Inc. A111 Revised 3/14 PORTSMOUTH® TWO-HANDLE BAR SINK FAUCET CODES AND STANDARDS FLOW RATE* 3.0 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ASME A112.18.1 CSA B 125 NSF 61/Section 9 & Annex G ANSI A117.1 2.5 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. 2.2gpm/8.3L/min. FLOW RATE FLOW RATE* GALLONS PER MINUTE 2.0 1.5 1.0 0.5 0.0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. 1.5 gpm/5.7 L/min. FLOW RATE Finish Options Product Number Description 4285.420 Two Handle Bar Faucet - 2.2 gpm/8.3 L/min. maximum flow rate 4285.420.F15 Two Handle Bar Faucet - 1.5 gpm/5.7 L/min. maximum flow rate Polished Chrome Stainless Steel (PVD) Oil Rubbed Bronze 002 075 224 Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged. © 2014 AS America Inc. A112 Revised 3/14