Transcript
Power Bank Layout
To Charge Power Bank Charge via USB Wall Charger
To Check Remaining Capacity Charge via Computer USB Port
10000mAh
Press the ON/OFF button and the capacity LED’s will come on. The LED’s will turn off automatically after approx. 15 seconds. Four LEDs on: 75% to 100% remaining capacity
Ah
m
10 0
00
Ah
m
Three LEDs on: 50% to 75% remaining capacity Two LEDs on: 25% to 50% remaining capacity
User Manual
• Unplug the connector labelled “5V IN” and leave the connector labelled “5V OUT” connected • Connect the USB connector to an AC wall adapter or USB port on a computer • During charging the LED’s will flash to show status • When charging is complete all four LED’s will be permanently on
To Charge Phone or USB Device To Charge a Mobile Phone or other USB Device
Ah
10000mAh can charge an iPhone or average smartphone 4 times* Rechargeable more than 500 times Unique hidden micro USB cable for charging and re-charging Four LED indicators to show remaining capacity Built-in over charging and short circuit protection Input Connector: 1 x Micro USB female Output Connector: 1 x USB Type A female Input: DC5V 1.5A Output: DC5V 2.1A Charging Time: 7 to 8 hours Size: 142mm (L) x 74mm (W) x 16mm (H) Weight: 220g
m
Features • • • • • • • • • • • •
00
Suitable for • iPhone/iPad/iPod • Most smartphones including Samsung, HTC, Motorola, Nokia, LG, Sony, BlackBerry, Huawei, Asus, Telstra, Doro & more • GPS devices, digital cameras • Portable Bluetooth devices such as headset or hands-free car kit • Portable hand-held gaming consoles • eReaders such as Kindle, Kobo & Sony
10 0
10000mAh
Version 1.1
00
10000mAh
10 0
Power Bank
Unplug either the connector labelled “5V IN” or the connector labelled “5V OUT”. It doesn’t matter which one, but one must be unplugged to check remaining capacity of power bank.
• Unplug the connector labelled “5V OUT” and leave the connector labelled “5V IN” connected • Connect the micro USB connector to your Android or Windows phone or other USB device that has a micro USB connector • Charging should commence automatically. If it doesn’t, press the power button • When your phone or device is fully charged, the power bank will automatically turn itself off Note: To charge an iPhone, unplug the connector labelled “5V IN” and connect your iPhone cable to the USB port on the power bank
One LED on: 0% to 25% remaining capacity
Important Safety Instructions • To maximize battery life span, fully charge power bank before first use for 7 to 8 hours • Store power bank in a cool and dry place. • Do not store power bank in hot or humid environment • Operating temperature should be between -10c to 45c • If power bank is not used for long periods of time, you should charge and discharge once every three months • When charging a device, the power bank may feel warm, this is a normal operating condition and should not cause concern • In normal conditions, the battery performance will decline over several years • Do not dispose of power bank in heat or fire • Do not clean power bank with harmful chemicals or detergents • Misuse, dropping or excessive force may cause product damage All rights reserved. Any information printed here is subject to change without notice. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc. All other brand names, trademarks, registered trademarks and copyrights are the property of their respective owners. Comsol and the Comsol logo are trademarks of Comsol Pty Ltd * Based on smartphone with a battery capacity of 2000mAh
www.comsol.com.au
