Power Distribution Module En - Cartek Motorsport Electronics

Transcript

DATA SHEET PDM Switch Panels The 4 channel Power Distribution Module from CARTEK has been designed to replace the functions of fuses, circuit breakers and relays in one small, fully electronic unit. FEATURES This Power Distribution Module is ideal for race cars and motorcycles which have minimal onboard electrical circuits but still require rugged and reliable protection and control. ● Fully electronic with no moving parts. ● Totally sealed against water and dirt. Simple connections and no configuration procedures makes this system very easy use and quick to install. ● Completely resistant to shock and vibration. Outputs can be used to control power to various devices such as ECUs, instrumentation, lighting, starter solenoid, radiator fan, etc. ● Channels can be controlled by switch or signal inputs. ● Each channel incorporates over-current protection. ● Dual-coloured status LED for each channel. ● Very small and weighs just 80g. Visual over-current and short-circuit indication makes fault finding simple. ● Manufactured in UK using high quality components. Can be supplied on it’s own or as a kit with switch panels. DIMENSIONS 90.0 mm Ch1 4 x 10Amps Cartek Automotive Electronics Ltd Published July 2016 Ch3 Ch4 42.0 mm 10.5 mm Ch2 For more information please go to www.cartekmotorsport.com .com 1 DATA SHEET SPECIFICATION Size: L = 90mm, W = 42mm. Weight: 80g. Positive Power terminal: M6 stud. Channel Output connections 6.3mm Male Spade Terminals Electrical Connector: Binder Flying Lead: Binder 79 3384 42 04 (2 meter long) Operational Voltage: Current consumption: 7v - 18v 10A - 12A (continuous), 18A (10 seconds) each channel. Maximum total 50A. 0.02A (No Load) Operating temperature: -10°C - +85°C. Storage temperature: -40°C - +125°C Outputs: WIRING DIAGRAM Channel status LEDs No LED = OFF Yellow = ON Flashing Red = ERROR +12v Power Input Ch1 Ch2 Ch3 Ch4 + + 4 x 10Amps Add surge protection diode when controlling starter solenoids. .com Connect close to solenoid. + Ch1 - Black wire Ch2 - Brown wire Ch3 - Blue wire Ch4 - White wire + Cartek Automotive Electronics Ltd Published July 2016 + + For more information please go to www.cartekmotorsport.com 2 DATA SHEET PARTS LIST PART NO DESCRIPTION CK-PM-04 Power Distribution Module (Unit Only with connection lead) CK-PK-08 Power Distribution Module (Kit - 4 Button) CK-PP-06 Power Distribution Module (Kit - 6 Button) CK-PS-04 Power Distribution Module Switch Panel (4 Button) CK-PS-05 Power Distribution Module Switch Panel (4 Button) CK-PS-13 Power Distribution Module Switch Panel (4 Button) CK-PS-06 Power Distribution Module Switch Panel (4 Button) CK-PS-07 Power Distribution Module Switch Panel (4 Button) CK-PS-14 Power Distribution Module Switch Panel (4 Button) CK-PP-28 Power Distribution Module Switch Panel (6 Button) CK-PP-27 Power Distribution Module Switch Panel (6 Button) CK-PP-26 Power Distribution Module Switch Panel (6 Button) Cartek Automotive Electronics Ltd Published July 2016 For more information please go to www.cartekmotorsport.com 3