Transcript
Power Divider / Combiner 25-540MHz
Broadband 2 and 4-Way Rx Only Power Divider / Combiner SP0154-52xx-11 Series
The RFI SP0154-52xx-11 Series of power dividers / combiners are used in receive only applications. Designed using a Hybrid Wilkinson broadband binary power splitting technique these products offer broadband capability with a good insertion loss and output port-to-port isolation. The modular design is ideal when building or expanding channels within an existing receiver multicoupler design.
Features: n Broadband n Suitable
n Compact n Two
covering 25 to 540MHz.
for use with analogue or digital RF communications. and robust modular design for indoor use.
and four way divider / splitter options.
AY 2-W
4-WA Y
Model Number Frequency Range Model Number Derivative - SP0154-52xx-11 Splits Insertion loss - Typical (input to any output port) Port-to-port isolation Power Rating Impedance Input Port Return Loss / VSWR - Typical Connector Types (all termination ports) Mounting Finish Dimensions (excl connectors) mm - approx Dimensions (excl connectors) inches - approx Weight - approx Temperature
Ordering Information SP0154-5202-11 SP0154-5204-11
P-40511-1
SP0154-52xx-11 25-540MHz 02 2 <3.2dB
04 4 <6.4dB
> 20dB Low signal power (Rx applications only) 50 Ohms 14dB / 1.5:1 N (F) Imperial screw threaded mounting holes provided with mounting screws Alodine L 60mm W 50.8mm H 47.5mm L 60mm W 108mm H 25mm L 2.36” W 2” H 1.87” L 2.36” W 4.25” H 1” 0.2kgs / 0.44lbs 0.40kgs / 0.88lbs -30° C to +70° C / -22° F to +158° F
Description Power Divider / Combiner 25-540MHz, 2-Way N (F) Connectors Power Divider / Combiner 25-540MHz, 4-Way N (F) Connectors
Copyright RFI. Subject to change without notice. 1
rfi.com.au
