Transcript
Power Hacksaws
Air • Electric • Hydraulic
Cold cutting of large pipe up to 30" diameter and structural steel – on site Ideal for a wide range of industries, including refineries, chemical plants, utilities, construction, offshore oil, mining, marine and demolition • Cold cutting of large pipe, structural steel, tanks, profiles and more • Compact size for cutting in confined spaces • Accessories include wide variety of heavy-duty blades and clamps for 90˚ cuts
Model 5 1212 0050
Model 5 1220 0050
Model 5 1215 0070
HYDRAULIC
ELECTRIC
AIR
ATEX Classified
Weight (lbs.)
Strokes per Min.
Blade Stroke
5 1212 0010 Air Consumption: 51 CFM Roll 1.5 HP Air Pressure: 90 PSI 5 1212 0050 Lever 1.5 HP Electric – 11 Amps / 110 Volt (Also available as 220 Volt/50 Hz)
100-350 100-350
23/8" 23/8"
1/2" 1/2"
15.4 15.4
5 1215 0070
110V/60 Hz
200-400
23/8"
Cable
13
Oil Flow: 4 GPM at 2000 PSI
100-500
23/8"
1/2"
Model Number
Motor Specifications
Throttle
Power
Hose
Pneumatic – 3/4" ID NPT Air Connection
Trigger
1.5 HP
Hydraulic – 1/2" FF (HTMA) Couplings 5 1220 0050
Lever
3.8 HP
ID
13.5
Hacksaw Accessories Hacksaw Blades – 8" to 37" length Dimensions Order No. Z22-9 HSS Z22-10 HSS Z22-11 HSS Z22-6 HSS Z22-6 HSS-SL* Z22-31 HSS Z22-7 HSS Z22-29 HSS Z22-33 HSS Z22-72 HSS Z22-30 HSS Z22-30 HSS-SL* Z22-73 HSS Z22-74 HSS Z22-75 HSS Z22-75 HSS-SL* Z22-37 HSS
Teeth/ Length Inch 8" 8" 8" 12" 12" 12" 16" 16" 16" 20" 21" 21" 24" 24" 30" 30" 37"
8 16 24 16 16 12 16 8 6 14 12 12 14 8 12 12 12
Hacksaw Clamps and Guide
Thickness
Material
Max. Dia. of Cut
1/16"
Steel/Alum. Steel Sheet Metal Steel Stainless Steel Steel Steel Steel/Alum. Cast Iron Steel Steel Stainless Steel Steel Steel/Alum. Steel Stainless Steel Steel
31/8" 31/8" 31/8" 65/8" 65/8" 65/8" 105/8" 105/8" 105/8" 145/8" 155/8" 155/8" 181/2" 181/2" 247/8" 247/8" 317/8"
1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 1/16" 5/64" 1/16" 1/16" 5/64" 5/64" 5/64" 5/64" 5/64"
* Use HSS-SL Blades for best cutting performance on stainless steel and hard metal. Blades for plastic, wood and masonry also available.
•
1-800-700-5919
•
Model No.
Cutting Dia.
Clamp Type
5 1207 9910 5 1202 9960 5 1207 8910 5 1207 8970 5 1208 9980
2" to 6" 4" to 12 3/4"* Up to 21" 215/8" x 113/8" Up to 12 3/4"*
5 1208 9990
Up to 12 3/4"*
Pipe Clamp Pipe Clamp Blade Guide Profile Clamp Automatic - Self-feeding Clamp (for pneumatic saws) Automatic - Self-feeding (for electric and hydraulic saws)
Model 5 1208 9980 Self-feeding Pipe Clamp for up to 12 3/4" dia. pneumatic saws*
Model 5 1202 9960 Pipe Clamp for 4" to 12 3/4" dia.*
Model 5 1208 9990 Self-feeding Pipe Clamp for up to 12 3/4" dia. electric and hydraulic saws*
* Cut up to 30" OD with two extension chains (order 2x P/N 5 1201 9030)
Visit our Web site at www.csunitec.com
23
