Preview only show first 10 pages with watermark. For full document please download

Power Over Ethernet (poe) Splitter Tpe-102s

   EMBED


Share

Transcript

Power over Ethernet (PoE) Splitter TPE-102S (V2.0R) The Power over Ethernet Splitter provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain. FEATURES TEW-503PI (07-28-2005) • IEEE 802.3af Power over Ethernet (PoE) Standard Compliant • Converts Non-PoE devices with Power Over Ethernet Support • Supports Adjustable Output 5V, 7.5V, 9V, 12V • Automatically detecting PoE Terminals and supplying inline power • Advanced Auto-Sensing Algorithm enables the ability to draw power from 802.3af PSE (Power Source Equipment) Devices • Supports Power Detection and Classification • Includes 2 Different Size of Jumper Cable • 5-Year Warranty TPE-102S (V2.0R) rev:09.17.2007 Power over Ethernet (PoE) Splitter TPE-102S (V2.0R) SPECIFICATIONS Hardware Standards • IEEE 802.3 10Base-T • IEEE802.3u 100Base-TX • IEEE 802.3af Power over Ethernet • 10Mbps: UTP/STP Cat. 3, 4, 5; Up to 100 Meters Network Media • 100Mbps: UTP/STP Cat. 5; Up to 100 Meters Protocol • CSMA/CD Topology • Star • 1 x PoE-IN Port (Data + Power): data pin: 1,2,3,6 power in: 4,5(V+), 7,8(V-) and 1,2(V+), 3,6(V-) Ports • 1 x Data-OUT Port (Data) Pin 1,2,3,6 Switch • Adjustable Switch between 5V, 7.5V, 9V and 12V • Power In: 48VDC 0.3A Power • Power Out: 5V(2A), 7.5V(1.33A), 9V(1.11A), 12V(0.86A) Jumper Cable Diagnostic LEDs • Plug Dimension: 5.5 x 2.0mm and 5.5 x 2.5mm Power Consumption • 10 Watts • Power: Green • Operating: 0°~ 45°C (32°F~ 113°F) Temperature • Storage: -40°~ 70°C (40°F~ 158°F) Humidity • 10%- 90% (non-condensing) Dimensions (LxWxH) • 80 x 54 x 24 mm (3.2 x 2.13 x 0.9 inches) (L x W x H) Weights • 120g (4.23 lb) Certification • FCC, CE NETWORKING SOLUTIONS PACKAGE CONTENTS • TPE-102S PoE Ports • Multi-Language User's Guide Power over Ethernet Splitter (TPE-102S) • Power Jumper Cable Ethernet Data 16-Port PoE and 10/100Mbps Web Smart Switch (TPE-S88) Power + Ethernet Data • Cat.5 Cable (60cm/23.6inches) 5V/12V Power Non-PoE Device which uses 5V/12V Power Input RELATED PRODUCTS 5V/12V Power Ethernet Data Power + Ethernet Data TPE-101I Power over Ethernet (PoE) Injector TPE-S88 16-Port 10/100Mbps Web Smart PoE Switch Power over Ethernet Injector (TPE-101I) 8-Port 10/100Mbps Ethernet Switch (TE100-S88Eplus) Ethernet Data 48V DC Power Power + Ethernet Data Power Jack Ethernet Data ORDERING INFORMATION 5V/12V Power 48V DC Power 5V/12V Power Ethernet Data Power + Ethernet Data Power over Ethernet Splitter Non-PoE Device which uses 5V/12V Power Input (TPE-102S) 20675 Manhattan Place,Torrance, CA 90501 USA Tel: 1-310-961-5500 Fax: 1-310-961-5511 Web: www.trendnet.com Email: [email protected] To Order Please Call: 1-888-326-6061 TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.