Power Presentation Products The In

Transcript

8099_01 8/12/08 3:00 PM Page 1 27 41 23/DAL BuyLine 8099 The POWER In PRESENTATION PRODUCTS MOUNTS, ACCESSORIES AND HARDWARE 8099_02 8/12/08 3:08 PM Page 2 MOUNTS, ACCESSORIES AND HARDWARE UNIVERSAL PROJECTOR MOUNT Features: • • • • • • • Black or white powder coated finish. Roll adjustment of ±20º. Pitch adjustment of ±15º with 360º of swivel. Supports projectors weighing up to 50 lbs. Fine-tuning projector’s alignment is simple with thumb wheels at the base of the UPM-1. Projector attachment hardware included. Compatible with Da-Lite’s full line of ceiling mount accessories. Accessories: • • • • • • • Above Ceiling Plate Plenum Cover for CPM-ACP Cathedral Ceiling Adapter Unistrut™ Parallel Pipe Coupling Unistrut™ Sliding Pipe Coupling Ceiling plate Escutcheon ring, (black, white or chrome) • Ceiling Support Pipe Stabilizer Kit • Male Pipe Coupler (11/2" NPT) • Female Pipe Coupler (11/2" NPT) • Female/female Pipe Coupler with cutout (11/2" NPT) • 4" Long Pipe (11/2" NPT) • 6" Long Pipe (11/2" NPT) • 10" Long Pipe (11/2" NPT) • 18" Long Pipe (11/2" NPT) • 24" Long Pipe (11/2" NPT) • 20"x20"x12" Projector Security Cage • 16"x16"x12" Projector Security Cage 3.25" to 5.83" two legs 5.63" 1.25" to 3.83" two legs 0.75" Suggested Specifications: Da-Lite/Advance Universal Projector Mount model UPM-1. The mount shall be a fabricated mild steel design and consist of a grooved coupling, U-joint, pitch bracket, locking ring, base disk, legs, and feet. The coupling shall be a 11/2" NPT steel half pipe coupling. The U-joint and legs shall be 14-gauge formed steel. The pitch bracket, locking ring, and base disk shall be 11-gauge steel and allow for the alignment of the projector lens to the pivot axes. The feet on the legs shall be adjustable to allow fine-tuning of the image to the viewing screen with thumb wheels. Mount shall have 20 degrees of roll adjustment, 15 degrees of pitch adjustment and 360 degrees of swivel. Will support up to 50 lbs. Mount assemblies shall have a commercial powder coat black or white finish. 6.50" 360º ±15º ±20º 2.78" to 3.69" UNIVERSAL PROJECTOR MOUNT PACKAGES Universal Projector Mount Packages Universal Projector Mount Packages make ordering simple by providing all of the necessary components for your projector installation in one easy part number. All kits include the UPM-1 Universal Projector Mount and are available in a black or white finish (only the visible components of each kit will be white). Available packages include combinations of the following accessories: • CPM-ACP Above Ceiling Plate • CPM-SC20 Projector Security Cage • CPM-PLC Plenum Cover • CM-P1218 12"-18" Adjustable Pipe Extension • CM-VIP Vibration Isolation Plate • CM-P6 6" Fixed Pipe Extension • CPM-CAP Cable Access Ceiling Plate • A302 Escutcheon Ring • CPM-SC16 Projector Security Cage UNIVERSAL PROJECTOR MOUNT PACKAGES Model Number Description Black or White Appr. Ship. Wt. (lbs.) UPM-1NS UPM-1C CPM-A CPM-A6 CPM-AP CPM-AP6 CPM-V6 CPM-V12 CPM-A12 CPM-AP12 CPM-AL6 CPM-APL6 CPM-AL12 CPM-APL12 CPM-L CPM-CL6 CPM-AS6 CPM-APS6 CPM-AS12 CPM-APS12 CPM-S CPM-CS6 Universal Projector Mount without Security Hardware Universal Projector Mount with Cable Lock UPM-1 with CPM-ACP UPM-1 with CMP-ACP and CM-P6 UPM-1 with CPM-ACP and CPM-PLC UPM-1 with CPM-ACP, CPM-PLC and CM-P6 UPM-1with CM-VIP, A302 and CM-P6 UPM-1 with CM-VIP, A302 and CM-P1218 UPM-1 with CPM-ACP and CM-P1218 UPM-1 with CPM-ACP, CPM-PLC and CM-P1218 UPM-1 with CPM-ACP, CM-P6 and CPM-SC20 UPM-1 with CPM-ACP, CPM-PLC, CM-P6 and CPM-SC20 UPM-1 with CPM-ACP, CM-P1218 and CPM-SC20 UPM-1 with CPM-ACP, CPM-PLC, CM-P1218 and CPM-SC20 UPM-1 with CPM-SC20 UPM-1 with CPM-CAP, CM-P6 and CPM-SC20 UPM-1 with CPM-ACP, CM-P6 and CPM-SC16 UPM-1 with CPM-ACP, CPM-PLC, CM-P6 and CPM-SC16 UPM-1 with CPM-ACP, CM-P1218 and CPM-SC16 UPM-1 with CPM-ACP, CPM-PLC, CM-P1218 and CPM-SC16 UPM-1 with CPM-SC16 UPM-1 with CPM-CAP, CM-P6 and CPM-SC16 x x x x x x x x x x x x x x x x x x x x x x 5 6 15 16 23 24 13 14 18 26 54 62 56 64 43 48 45 53 47 55 34 39 2 CPM-AP6 CPM-AP6 www.da-lite.com • [email protected] 8099_03 8/14/08 11:28 AM Page 3 MOUNTS, ACCESSORIES AND HARDWARE 27 41 23/DAL BuyLine 8099 UNIVERSAL PROJECTOR MOUNT ACCESSORIES Above Ceiling Plate Cable Access Coupling Designed to accommodate any projector mount with 11/2" NPT pipe. Conveniently fits and attaches within 1' x 2' area of drop ceiling grid. Will not interfere with tie wires or lighting fixtures in suspended ceiling grid. Projector mount may be positioned in corner of ceiling grid. Maximum load of 50 pounds. Two electrical knockouts provided. Kit includes 10' of safety cable, 20' of tie wire, four turn buckles, wood and concrete anchors. Includes a black finish escutcheon ring. CM-CAC 11/2" NPT female pipe coupler with cutout access for cable. Plenum Cover Package Plenum kit for use with CPM-ACP. Features removable lid for easy access. Includes knockouts for 11/2" and 3/4" electrical conduit. Black powder coated finish. Cathedral Ceiling Adapter CM-CCA - 11/2" NPT female pipe coupler designed to mount to a cathedral ceiling. UL listed to 300#. Unistrut™ Parallel Coupler CM-UPC 11/2" NPT female pipe coupler designed to mount to a vertical piece of Unistrut™ for height adjustment. UL Listed to 300#. Unistrut™ Sliding Pipe Coupler CM-USC - 11/2" NPT female pipe coupler designed to mount to a horizontal piece of Unistrut™ for horizontal adjustment. UL listed to 300#. Coupling Plate 11/2" NPT female pipe coupler will mount to any flat surface. A304 Single A305 Four pack Male All Thread Extension Pipe CM-MT 13/4" x 11/2" NPT Male All Thread Extension Pipe. Pipe Coupler CM-FT 2" x 11/2" NPT Female Threaded Pipe Coupler. Ceiling Mounting Pipes Five lengths of black 11/2" NPT pipe; 4", 6", 10", 18", 24". Adjusts distance between ceiling mount coupling plate and mount. Available in black or white. Vibration Isolation Ceiling Plate CM-VIP Designed to reduce unwanted vibration of a projector. Adjustable Pipes CM-P Available in size ranges from 5" to 8" up to 24" to 36" and are available in black or white. Cable Lock A-565 Cable Lock for the UPM-1 Universal Projector Mount. Suspended Ceiling Plate CM-SCP - 2' x 2' plate with Unistrut™ channel for a sliding 11/2" NPT female pipe coupler. White or black finish available. Hardware Kits A101 Solid Concrete Escutcheon Ring A302 Escutcheon Ring for 11/2" Support Pipe. Available in black, white or chrome. A105 Wood Stud/Beam A111 Hardware Kit for Unistrut™ • Six fasteners per kit Ceiling Mount Pipe Stabilizer CM-PS Stabilizer Kit for 11/2" NPT pipe. Cable Access Ceiling Plate The CM-CAP is designed for use with hanging projectors and is compatible with the Advance Universal Projector Mount, the UPM-1. A 11/2" recess in the plate allows for cable access once the plate is mounted to the ceiling structure. Projector Security Cage The Projector Security Cage is the perfect accessory for the prevention of projector theft and recreational damage. Fully encloses the projector in a locked steel cage. The CPM-SC20 is 20" x 20" x 12". The CPM-SC16 for smaller projectors is 16" x 16" x 12". Available in a black or white powder coated finish. 800-622-3737 • fax 574-267-7804  3 8099_11 9/10/08 3:34 PM Page 4 MOUNTS, ACCESSORIES AND HARDWARE DA-LIFT Features: • • • • • Raise or lower video projectors weighing up to 300 pounds with a push of a button. Heavy-duty, all metal construction with rack and pinion, chain drive lift mechanism for quiet operation. Bottom of lift is adjustable for flush installation and can be finished to match ceiling. Complete with three position control switch with cover plate. Optional plenum kit available where needed. Plenum covers meet plenum building codes for Da-Lite’s complete line of concealed projector lifts. Suggested Specifications: ____________________________ Video Projector Lift, Model ______________ Da-Lift 15, 19 or 19L, electrically operated 120 V (60 Hz) not more than 2.2 amp. for projectors weighing up to 300 pounds. Da-Lift 10M and 15M electrically operated 120 V (60 Hz) not more than 1.5 amp. for projectors weighing up to 40 pounds. To have rack and pinion, with chain drive lift mechanism. Shall have specially designed motor, to be three wire with ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears, capacitor and an electric brake to prevent coasting. To have preset but adjustable limit switch to automatically stop lift in the “down” position. When raised, the lift will engage a micro switch that will cut power to the motor. Frame to be black welded steel with two electrical outlets furnished on the platform, for ceiling recessed installation. Bottom of projector lift to be adjustable to allow flush installation with surrounding surface. Removable tray is attached to bottom frame assembly to allow for ceiling tile attachment (by others). To be complete with three position control switch with cover plate. Optional low voltage, radio frequency or infrared, remotes available. Optional plenum kit available where required by code. To be listed by Underwriters’ Laboratories. UL ® DA-LIFT VIDEO PROJECTOR LIFT SPECIFICATIONS Models Load Cap. Width “A” Height “B” Depth “C” Lbs. In. In. In. Da-Lift 10M Da-Lift 15M Da-Lift 15 Da-Lift 19 Da-Lift 19L 40 40 300 300 300 225/8" 225/8" 303/4" 323/4" 423/4" 15" 20" 20" 24" 24" Travel “D” In. Width “E” In. 10" 15" 15" 19" 19" 181/2" 181/2" 261/2" 281/2" 381/2" 22" 22" 34" 38" 48" Features: Features: • • • • • • • • • • Includes universal projector mount. Front to back, left to right, vertical, and tilt projector adjustments. Signal cable and power cord management options. Electrical knockouts provided. Internally mounted wall switch for installer operation. C UL ® Inside Dimensions Height “F” Depth “G” In. In. 10" – 17" 15" – 22" 15" – 22" 19" – 30" 19" – 30" 171/2" 171/2" 281/2" 321/2" 421/2" Unit Weight Lbs. Approx. Ship. Wt. Lbs. 87 87 122 132 177 115 115 172 182 215 Includes two outlet boxes, prewired duplex female receptacle, and duplex plate. All internal wiring is complete. Designed to mount in suspended ceiling or drywall ceiling. Infrared or radio frequency remote operation available. Unit has white powder coat finish. Suggested Specifications: Da-Lite/Advance Video Projector lift model Da-Lift ________ 26PL/33PL shall be mounted where indicated on plans. The lift shall operate on 120V AC power and not draw more than 5.0 amps. The mount shall be a fabricated mild steel design and consist of a 14-gauge welded support frame, 14-gauge welded tilting frame, 18-gauge ceiling tile holder and 18-gauge ceiling tile trim piece. Product shall have a prewired 120V AC grounded duplex receptacle and a prewired built-in switch for installer operation. Product shall have a commercial powder coat white finish. DA-LIFT PIVOT VIDEO PROJECTOR LIFT SPECIFICATIONS Model Load Cap. Dim. A Dim. B Da-Lift 26PL Da-Lift 33PL 25 lbs. 25 lbs. 17.00" 21.50" 13.63" 16.63" Dim. C Dim. D Dim. E Dim. F 25.38" 32.38" 16.00" 20.50" 14.00" 18.50" 12.75" 16.25" 2" 2" C A B B B D TOP OF SUSPENDED CEILING GRID 3/4" TO 2-1/8" F TOP OF SUSPENDED CEILING GRID E 4 www.da-lite.com • [email protected] 8099_05 8/14/08 3:02 PM Page 5 MOUNTS, ACCESSORIES AND HARDWARE 27 41 23/DAL BuyLine 8099 LARGE FLAT PANEL WALL MOUNTS Features for the PWM-0262 • The PWM-0262 is designed with a unique rail mounting system to make installation simple for any plasma with mounting holes 11/2" to 62" apart horizontally and up to 201/2" apart vertically. • With the narrow profile of the PWM-0262 there is only a 21/2" space between the back of the plasma unit and the wall. • Holds up to 200 lbs. and features 20-degrees of tilt. • Available in gray or black powder coated finishes. Features for the PWS-0262 • The PWS-0262 is designed with a unique rail mounting system to make installation simple for any plasma with mounting holes 11/2" to 62" apart horizontally and up to 201/2" apart vertically. • With the narrow profile of the PWS-0262 there is only a 21/2" space between the back of the plasma unit and the wall. • Holds up to 200 lbs. • Available in gray or black powder coated finishes. • Static mount. PWM-0262 Accessories for PWM-0262 and PWS-0262 • • • • • PW-VC Videoconferencing Shelf PWM-PA Pipe Attachment Bracket A101 Hardware Kit Solid Concrete A105 Hardware Kit Wood Stud A109 Hardware Kit Steel Stud, Hollow Concrete Block PWS-0262 PWM-0262 Suggested Specifications: Da-Lite/Advance Plasma Wall Mount model _________________ shall be mounted where indicated on plans to secure a plasma unit in landscape orientation. The mount shall be a fabricated mild steel design and consist of two rails fastened to a channel, hangers (PWS-0262 only) or tilting hanger assemblies (PWM-0262 only), and extension angles. The mount assembly shall be manufactured with 11-gauge material. Mount packages shall safely hold a__________inch diagonal screen plasma to __________________ wall construction with 3/8" diameter fasteners. Mount assemblies shall have a commercial powder coat black or gray finish. 5.00 TO 64.81 38.00 0º TO 20º 0.39 x 0.75 SLOTS FOR MOUNTING TO WALL 2.68 1.40 1.00 8.25 9.00 22.00 16.00 11.00 The fasteners used to install the mount shall be selected from the following options: 3 /8"x 21/2" hex head lag screws for wood stud structural walls 3 /8"-16 Hollow Set Drop-In with hex head cap screws for solid concrete structural walls 3 /8"-16 Toggler® with hex head cap screws for hollow concrete block and steel stud structural walls 24.00 1.09 TILTED VERTICAL PWS-0262 1.63 TO 61.50 38.00 2.18 0.39 x 0.75 SLOT FOR MOUNTING TO WALL 2.39 1.02 7.82 9.00 22.00 12.70 16.00 24.00 SPECIFICATION DATA Model Plasma Orientation PWM-0262 PWS-0262 Landscape Landscape 0.88 Allowable Allowable Horizontal Vertical Dimension Dimension Between Plasma Between Plasma Mounting Holes Mounting Holes 5" to 6413/16" 15/8" to 611/2" 0" - 191/4" 0" - 201/2" Max. Plasma Weight 200 lbs. 200 lbs. 800-622-3737 • fax 574-267-7804  5 8099_06 8/29/08 6:55 AM Page 6 MOUNTS, ACCESSORIES AND HARDWARE ARTICULATING FLAT PANEL MOUNTS Features: • Equipped with an articulating arm, the mount can extend a flat panel monitor up to 29" away from the wall. • The PWM-AR1 is designed with a unique rail mounting system to make installation simple for any plasma with mounting holes 11/2" to 62" apart horizontally and up to 201/2" apart vertically. • The mount will hold up to 130 lbs. and features 20 degrees of tilt. • The PWM-AR1 is finished with a black or gray powder coated finish and includes a five year warranty. • The optional WB-100 recessed wall box allows the arm assembly of the PWM-AR1 to be hidden when not in use Accessories: • 3/8" hardware kits for concrete, wood stud, steel stud and hollow concrete block surfaces. • PW-VC Video conferencing shelf. • WB-100 Wall box. Suggested Specifications: Da-Lite/Advance plasma wall mount model PWM-AR1 shall be mounted where indicated on plans. The mount shall be a fabricated mild steel design and consist of a wall support plate, two articulating arms, tilt channel weldment, tilt plate, rails, hangers, and extensions. The unit shall be constructed of 11gauge sheet steel. The articulating arms shall be 1" x 2" x 14-gauge rectangular steel tubing welded to solid steel pivots. Mount to attach to ___________________ wall construction with 3/8" diameter fasteners and extend up to 27-3/4" from the wall. Mount assemblies shall have a commercial powder coat black or gray finish. The fasteners used to install the mount shall be selected from the following options: 3 /8"x 21/2" hex head lag screws for wood stud structural walls 3 /8"-16 Hollow Set Drop-In with hex head cap screws for solid concrete structural walls 3 /8"-16 Toggler® with hex head cap screws for hollow concrete block and steel stud structural walls PLASMA WALL MOUNT PWM-AR1 1.63 TO 61.50 38.00 0º TO 20º 5.30 27.75 1.02 7.82 16.20 22.00 12.70 WALL PLATE DETAIL WB-100 Wall Box 0.88 .039 x 5.50 SLOT FOR MOUNTING TO WALL RETRACTED EXTENDED 6.50 6.50 16.00 SPECIFICATION DATA Model PWM-AR1 Allowable plasma mount points 15/8" - 611/2" horizontal and 0" - 201/2" vertical 6 Monitor Tilt Reach From Wall to Back of Monitor Equip Load Rating Forward 20˚ 511/16" to 273/4" 130 lbs. www.da-lite.com • [email protected] 8099_07 8/14/08 11:56 AM Page 7 MOUNTS, ACCESSORIES AND HARDWARE 27 41 23/DAL BuyLine 8099 FLAT PANEL WALL MOUNTS Features: • Choose from flat mount or tilt models in either portrait or landscape orientation. • PWM Models offer 20º of tilt. • Narrow profile allows for 2" gap between back of plasma unit and wall. • Security lock included. • Features spacing to easily mount to wall studs on 16" or 24" centers. • Constructed of 11-gauge steel. • Accommodates VESA 200mm mounting hole patterns. Accessories: • 3/8" hardware kits for concrete, wood stud and Unistrut™ surfaces. • PW-VC Video conferencing shelf. • PW-PA Pipe attachment accessory. PWM-1624 Suggested Specifications: Da-Lite/Advance Plasma Wall Mount model ___________________________ shall be mounted where indicated on plans to secure a plasma unit in portrait/landscape orientation. The mount shall be a fabricated mild steel design and consist of a fixed channel, tilting channel (PWM and PWMP models only), rails and hangers. The mount assembly shall be manufactured with 11-gauge material and include a security lock. Mount packages shall safely hold a ______________________inch diagonal screen plasma to ______________________________ wall construction with 3/8" diameter fasteners. Mount assemblies shall have a commercial powder coat black finish. The fasteners used to install the mount shall be selected from the following options: 3 /8" x 21/2" hex head lag screws for wood stud structural walls. 3 /8 "-16 Hollow Set Drop-In with hex head cap screws for solid concrete structural walls. 3 /8 "-16 Toggler® with hex head cap screws for hollow concrete block and steel stud structural walls. PWM-1624 PWMP-1600 20.00" O.A. 18.5" MAX. 1.63" MIN. 28.00" O.A. 26.5" MAX. 1.63" MIN. 4.88" 4.88" 7.37" 1.50" 1.50" 9.84" 19.38" 28.00" 17.50" O.A. 17.25" 4.25" 10.00" 4.25" 29.50" O.A. 4.25" 10.00" 16.00" 4.00" 4.25" 4.00" 26.00" 16.00" 20.00" 20º SPECIFICATION DATA Model Plasma Orientation PWM-1624 PWMP-1600 PWS-0227 PWSP-0219 landscape portrait landscape portrait Allowable Allowable Horizontal Vertical Dimension Dimension Between Plasma Between Plasma Mounting Holes Mounting Holes 15/8" - 261/2" 15/8" - 181/2" 15/8" - 261/2" 15/8" - 181/2" Max. Plasma Weight 0" - 16" 0" - 261/2" 0" - 16" 0" - 261/2" 150 lbs. 150 lbs. 150 lbs. 150 lbs. 2.12" IN ZERO TILT 2.12" IN ZERO TILT PWS-0227 PWSP-0219 20.00" O.A. 18.5" MAX. 1.63" MIN. 28.00" O.A. 26.5" MAX. 1.63" MIN. 4.88" 3.37" 4.88" 15.37" 9.84" 4.25" 17.25" 1.50" 28.00" 4.25" 1.50" 4.25" 4.25" 1.88" 800-622-3737 • fax 574-267-7804 1.88"  7 8099_08 8/12/08 3:12 PM Page 8 MOUNTS, ACCESSORIES AND HARDWARE VESA® WALL MOUNTS VESA® ARTICULATING ARMS Features: Features: • • • • • • Available in Static or Tilt models. • VSM-TL offers 5º negative tilt and 20º positive tilt. • Narrow profile on VSM-ST allows for a 1" gap between back of monitor and wall. • Choose from gray or black powder coated finish. • Mounts easily to a single wall stud. • Monitor mounting hardware included. Available with 11" or 20" extension. Offers 38º of tilt (forward and backward). Choose from a gray or black powder coated finish. Mounts easily to a single wall stud. Wire management clips and monitor mounting hardware included. Accessories: Accessories: • 3/8" diameter fastener kits. • 3/8" diameter fastener kits. • VSM-PA pipe attachment accessory. Suggested Specifications: Da-Lite/Advance VESA® wall mount model VSM-AR ______________________ shall be mounted where indicated on plans. The mount shall be a fabricated mild steel design and consist of a wall support plate, two articulating arms, swing channel, and tilt plate. The wall support plate shall consist of two 1/4" steel support brackets welded to an 11 gauge steel plate. The articulating arms shall be 1" x 2" x 14-gauge rectangular steel tubing welded to solid steel pivots. The swing channel and tilt plate shall be formed 14 gauge sheet steel. Mount to attach to ______________________ wall construction with 3/8" diameter fasteners and extend ________________ inches from the wall. Mount assemblies shall have a commercial powder coat black or gray finish. VSM-AR1 Suggested Specifications: Da-Lite/Advance VESA® wall mount model VSM- ________________________ shall be mounted where indicated on plans. The mount shall be a fabricated mild steel design and consist of a wall support plate and monitor mount plate. The wall support plate and monitor mount plate shall be formed 14 gauge sheet steel. Mount to attach to ________________ wall construction with 3/8" diameter fasteners. Tilting mount shall move back 5˚ and forward 20˚. Mount assemblies shall have a commercial powder coat black or gray finish. VSM-AR2 VSM-ST VESA® MOUNT ARTICULATING ARMS VESA® WALL MOUNTS Model VESA Hole Pattern mm Base Arm Rotation Monitor Tilt Reach From Wall to Back of Monitor Equip. Load Rating lbs. VSM-AR1 VSM-AR2 75 and 100 75 and 100 180˚ 180˚ ±38˚ ±38˚ 11" 20" 40 40 ® Model VESA® Hole Pattern mm Monitor Tilt Equip Load Rating lbs. VSM-ST VSM-TL 75 and 100 75 and 100 None 5˚ back, 20˚ forward 40 40 VSM-AR1 – 11" Extension VSM-ST – Static 4.37" 0.75" 3.61" 180º 1.50" 5.25" 6.22" O.A. 3.94" 2.95" 1" 0.37" 360º VSM-TL ø.39 2.56" 1.05" 5.81" 0º TO 194º 7.50" 4.75" 1.44" 3.94" 2.95" 6.34" O.A. ±38º TILT FROM VERTICAL 3" 1.52" 1.68" ø.200 3.25" TOP VIEW FRONT VIEW VSM-AR2 – 20" Extension 1" REAR VIEW SIDE VIEW VSM-TL – Tilt 6.21" 3.94" 2.95" 4.37" 0.37" 0.75" FRONT VIEW 0.97" 20º 4.82" 5º 180º 1.5" 5.25" 360º 7.06" 1.05" 7.50" 4.75" ±38º TILT FROM VERTICAL 3.61" 2.95" 3.94" CL ø0.39 1.32" 8.31" 3" ø.200 10.31" 0º TO 194º 1.52" 0.97" 1.68" FRONT VIEW FRONT VIEW SIDE VIEW REAR VIEW 3.25" TOP VIEW 8 www.da-lite.com • [email protected] 8099_09 8/14/08 11:40 AM Page 9 MOUNTS, ACCESSORIES AND HARDWARE 27 41 23/DAL BuyLine 8099 FLAT PANEL MOUNT ACCESSORIES Hardware Kits Cable Access Coupling A101 Solid Concrete CM-CAC 11/2" NPT female pipe coupler with cutout access for cable. A105 Wood A109 Steel Stud and Hollow Concrete Block • Six fasteners per kit Male All Thread Extension Pipe CM-MT 13/4" x 11/2" NPT Male All Thread Extension Pipe. Pipe Coupler Videoconferencing Shelf CM-FT 2" x 11/2" NPT Female Threaded Pipe Coupler. 10 lb. weight limit. 180º tilt. Black or gray powder coat. Ceiling Mounting Pipes PW-VC Videoconferencing Shelf Five lengths of black 11/2" NPT pipe; 4", 6", 10", 18", 24". Adjusts distance between ceiling mount coupling plate and mount. Available in black or white. Pipe Attachment Accessories Securely attaches Flat Panel Wall mounts to a vertical or horizontal 11/2" pipe (not included). Escutcheon Ring PW-PA Pipe Mount Bracket for the PWM-1624 A302 Escutcheon Ring for 11/2" Support Pipe. Available in black, white or chrome. PWM-PA Pipe Mount Bracket for the PWM-0262 and PWS-0262 VSM-PA Mount Bracket for the VSM-ST and VSM-TL Wall Box A recessed wall box designed for use with the PWM-AR1. The wall box allows the arm assembly of the PWM-AR1 to be hidden when not in use. Adjustable Pipes CM-P available in size ranges from 5" to 8" up to 24" to 36" and are available in black or white. Ceiling Mount Pipe Stabilizer WB-100 Wall Box for PWM-AR1 CM-PS Stabilizer Kit for 11/2" NPT pipe. Cathedral Ceiling Adapter CM-CCA - 11/2" NPT female pipe coupler designed to mount to a cathedral ceiling. UL listed to 300#. Suspended Ceiling Plate CM-SCP - 2' x 2' plate with Unistrut™ channel for a sliding 11/2" NPT female pipe coupler. White or black finish available. Unistrut™ Parallel Coupler Cable Access Ceiling Plate CM-UPC 11/2" NPT female pipe coupler designed to mount to a vertical piece of Unistrut™ for height adjustment. UL Listed to 300#. The CM-CAP is designed for use with hanging projectors and is compatible with the Advance Universal Projector Mount, the UPM-1. A 11/2" recess in the plate allows for cable access once the plate is mounted to the ceiling structure. Coupling Plate Unistrut™ Sliding Pipe Coupler 11/2" NPT female pipe coupler will mount to any flat surface. CM-USC - 11/2" NPT female pipe coupler designed to mount to a horizontal piece of Unistrut™ for horizontal adjustment. UL listed to 300#. A304 Single A305 Four pack 800-622-3737 • fax 574-267-7804  9 8099_10 8/12/08 3:14 PM Page 10 MOUNTS, ACCESSORIES AND HARDWARE FLAT PANEL STANDS Features: • • • • • • • • • Available in mobile (MPS) or fixed (FPS) versions in three heights. Durable black powder coated finish. Two key-operated theft deterrent locks. 15º tilt. Height adjustable component shelf included. Universal plasma mount will accommodate most plasma units. Cord management incorporated into uprights. MPS models include heavy-duty 5" casters. 1/4" steel base plate ensures stability on FPS models. Accessories: • Adjustable accessory shelf (holds up to 30#). • PW-VC video conferencing shelf. • Cabinet package for the MPS. MPS Suggested Specifications: Da-Lite/Advance Mobile Plasma Stand model MPS ______________ shall be positioned where indicated on plans. The stand shall be a fabricated mild steel design and consist of a welded base, factory assembled accessory shelf, welded top frame, and universal plasma mount. The base shall be a MIG welded assembly fabricated with 11/2" x 2" x 11-gauge and 2" x 2" x 14-gauge wall tubing. The shelf support shall be a MIG welded assembly fabricated with 1" x 1" x 20-gauge and 2" x 2" x 14-gauge wall tubing. The shelf shall be 3/4" laminated wood. The top frame shall be a MIG welded assembly fabricated with 11/2" x 2" x 11-gauge and 2" x 2" x 14-gauge wall tubing. Two columns shall be fabricated with 13/4" x 13/4" x 16-gauge wall tubing and have protected openings for cord concealment. The universal plasma mount shall be fabricated with 11-gauge cold rolled steel and securely attach to the top frame and tilt forward 0º through 15º. Mount shall have a commercial powder coat black finish. FPS MPS MODELS FPS Suggested Specifications: Da-Lite/Advance Fixed Plasma Stand model FPS ______________shall be positioned where indicated on plans. The stand shall be a fabricated mild steel design and consist of a welded base, factory assembled accessory shelf, welded top frame, and universal plasma mount. The base shall be a MIG welded assembly fabricated with 1/4" plate and 2" x 2" x 14 ga wall tubing. The shelf support shall be a MIG welded assembly fabricated with 1" x 1" x 20 ga and 2" x 2" x 14 ga wall tubing. The shelf shall be 3/4" laminated wood. The top frame shall be a MIG welded assembly fabricated with 11/2" x 2" x 11 ga and 2" x 2" x 14 ga wall tubing. Two columns shall be fabricated with 13/4" x 13/4" x 16 ga wall tubing and have protected openings for cord concealment. The universal plasma mount shall be fabricated with 11 ga CR sheet and securely attach to the top frame and tilt forward 0º through 15º. Mount shall have a commercial powder coat black finish. Two key-operated theft deterrent locks. 15º tilt. Fully height adjustable. Height adjustable component shelf. 10 MPS Model Nominal Height to Top of Plasma Maximum Plasma Weight Dimensions (w x d x h) MPS-60 MPS-72 MPS-84 60" 72" 84" 100# 100# 100# 347/8" x 213/8" x 521/2" 347/8" x 213/8" x 641/2" 347/8" x 213/8" x 761/2" Model Nominal Height to Top of Plasma Maximum Plasma Weight Dimensions (w x d x h) FPS-60 FPS-72 FPS-84 60" 72" 84" 100# 100# 100# 337/8" x 231/2" x 501/2" 337/8" x 231/2" x 621/2" 337/8" x 231/2" x 741/2" FPS MODELS MPS Cabinet Accessory • Locking door. • Vented. • Cable access hole. Videoconferencing Shelf Accessory • 10 lb. weight limit. • 180º tilt. • Black or gray powder coat. www.da-lite.com • [email protected] 8099_11 8/29/08 6:55 AM Page 11 MOUNTS, ACCESSORIES AND HARDWARE 27 41 23/DAL BuyLine 8099 CONFIDENCE MONITOR STANDS Features for the MPS-ACM • The MPS-ACM includes a 6-foot power cord and a radio frequency remote with a range of 30 feet. • The MPS-ACM will work universally with most flat panel monitors and the unique rail mounting system ensures an easy installation for the monitor with the added security of a key operated lock. • Heavy duty five inch casters provide a safe and stable transport of flat panel monitors when navigating uneven surfaces. • The nominal height of the top of the monitor is adjustable up to 42". The MPS-ACM will hold up to 130 lbs., will tilt upward between 15 and 50 degrees from vertical and is standard with a black powder coated finish. Features for the MPS-MCM • The MPS-MCM will work universally with most flat panel monitors and the unique rail mounting system ensures an easy installation for the monitor with the added security of a key operated lock. • Heavy duty five inch casters provide a safe and stable transport of flat panel monitors when navigating uneven surfaces. • The nominal height of the top of the monitor is adjustable up to 42". The MPS-MCM will hold up to 130 lbs., will tilt upward between 15 and 50 degrees from vertical and is standard with a black powder coated finish. MPS-ACM Accessories for both MPS-ACM and MPS-MCM: 28.00" 26.13" MAX 1.50" MIN. NOMINAL TOP OF PLASMA • Concealment skirt (black). 4.88" Suggested Specifications: 17.25" Da-Lite/Advance Confidence Monitor model MPS ______________. The stand shall be a fabricated mild steel design and consist of a welded base, welded top frame, two columns, electric tilt mechanism (MPS-ACM only) hydraulic tilt mechanism (MPS-MCM only), and universal plasma mount. The base shall be a MIG welded assembly fabricated with 11/2" x 2" x 11ga and 2" x 2" x 14 ga wall tubing. The top frame shall be a MIG welded assembly fabricated with 11/2" x 2" x 11ga and 2" x 2" x 14 ga wall tubing. Two columns shall be fabricated with 13/4" x 13/4" x 16 ga wall tubing and have protected openings for cord concealment. The universal plasma mount shall be fabricated from 11ga CR sheet and securely attach to the top frame for vertical adjustment. The automated stand shall use radio frequency remote controlled components that operate on 110V AC 60Hz electric power to control the backward tilt from 15° through 50° from vertical. The manual stand shall use a hand operated hydraulic pump and valve to control the backward tilt from 15° through 50° from vertical. Mount shall have a commercial powder coat black finish. CL 43" 16.50" TO 27.50" ADJ. HEIGHT 34.63" 15° MIN. TILT 28.75" COLUMN HEIGHT 1.50" FRONT VIEW 2.00" 23.13" 25.50" 5.75" 50° MAX. TILT SIDE VIEW MPS-MCM 28.00" 26.13" MAX 1.50" MIN. NOMINAL TOP OF PLASMA 4.88" 17.25" CL 1.50" 43" 16.50" TO 27.50" ADJ. HEIGHT 34.63" 15° MIN. TILT 28.75" COLUMN HEIGHT FRONT VIEW 2.00" 23.13" 25.50" 5.75" 50° MAX. TILT SIDE VIEW SPECIFICATION DATA Model Nominal Height to Top of Plasma Allowable Plasma Mount Points Maximum Flat Panel Weight Power Supply Required MPS-ACM 42" 130# 110 VAC 60Hz MPS-MCM 42" 15/8"-261/2" horizontal and 0"-16" vertical 15/8"-261/2" horizontal and 0"-16" vertical 130# manual 800-622-3737 • fax 574-267-7804 11  8099_12 8/12/08 3:15 PM Page 12 QUICK LINK® FLAT PANEL MOUNT Features: • Patented Quick Link® design speeds up installation time and enhances mount safety. • UL approved for ceiling attachment to concrete, wood beam, and Unistrut™ structural load bearing surfaces. • Threaded vertical mechanical compression on monitor case prevents plasma monitor roll out. • 360º of swivel adjustment and 0-30º of tilt adjustment. • Landscape screen orientation mount. • Models sized to fit plasma from 33" to 50" diagonal. • Optional VCR/DVD mount brackets can be installed without plasma monitor removal. Accessories: • • • • • • • • • • • Height adjustable front loading VCR/DVD player mount. 11/2" pipe stabilizer kit. Exclusive Unistrut™ sliding suspended ceiling plate. (White and Black ceiling plate finish available) Escutcheon ring for 11/2" support pipe. (Black, white or chrome) Unistrut™ channel supported Sliding 11/2" NPT pipe transition. VCR mount lock kit. 2" x 11/2" NPT female threaded support pipe coupler. Cathedral ceiling support pipe coupler. 13/4" x 11/2" NPT male threaded pipe extension. 3 /8" hardware kits for concrete, wood beam and Unistrut™ surfaces. 4", 6", 10", 18" and 24" 11/2" NPT pipe extension lengths. Coupling Plate Length of Pipe (Not Included) Suggested Specifications: Pivot Assembly Da-Lite/Advance Quick Link® plasma mount Model QLP ___________________ shall be mounted where indicated on plans. The mount shall be a fabricated mild steel design and consist of a coupling plate, Quick Link® pivot assembly, adjustable frame assembly, and sliding center support trays. The coupling plate shall be a 11/2" NPT steel half pipe coupling MIG welded onto an 11-gauge rectangular plate. The Quick Link® pivot assembly shall be a MIG welded assembly fabricated from 3/8" thick bar, 11/2" diameter rod, 5/8" diameter alloy steel bolt, 5/8" nut, 5/8" vibration-resistant lock washer, 1/4" thick washer, and 11/2" NPT steel half pipe coupler. It shall connect to the adjustable frame assembly and allow it to swivel 360˚ and tilt forward 0˚ through 30˚. The adjustable frame assembly shall consist of one 11-gauge hanger and five formed interconnecting 14-gauge channels. The 14-gauge sliding center support trays shall have a 5/16" formed lip to restrict monitor travel. Mount packages shall be UL / C-UL listed and comply to UL 1678 to safely hold a __________inch diagonal screen TV/monitor to ____________________________ ceiling construction with 3/8" diameter fasteners. Mount assemblies shall have a commercial powder coat black finish. UL ® C UL ® To comply with the UL load test standard of at least four times the monitor's weight, the fasteners used to install the mount shall be selected from the following options: 3 /8"x 21/2" hex head lag screws for wood stud structural ceilings 3 /8"-16 Hollow Set Drop-In with hex head cap screws for solid concrete structural ceilings 3 /8"-16 hex head cap screws for Unistrut™ channel or metal joist QLP MODELS: ADJUSTMENT RANGE GUIDE Models Frame Opening Width Frame Opening Height QLP-2735 QLP-3642 QLP-4452 283/4" - 361/4" 343/4" - 421/4" 443/4" - 521/4" 201/4" - 261/4" 201/4" - 261/4" 261/4" - 321/4" DA-LITE SCREEN COMPANY, INC. 3100 North Detroit Street P. O. Box 137 Warsaw, IN 46581-0137 U.S.A. Phone: 574-267-8101 800-622-3737 Fax: 574-267-7804 Toll Free Fax: 877-325-4832 www.da-lite.com [email protected] © Copyright 2008. Printed in U.S.A.