Transcript
Ultra-Small Ceramic
Power Splitter/Combiner 2 Way-90°
50Ω
Maximum Ratings
1700 to 2700 MHz CASE STYLE: FV1206-1
Features
* Derate linearly to 7W at 100°C ambient. Permanent damage may occur if any of these limits are exceeded.
• low insertion loss, 0.4 dB typ. • high isolation, 26 dB typ. • wrap-around terminal for excellent solderability • ultra small, 0.12"X0.06"X0.035" • patent pending
Pin Connections
Applications
Operating Temperature
-55°C to 100°C
Storage Temperature
-55°C to 100°C
Power Input (as a splitter)
QCN-27+
15W* max.
SUM PORT
1
50 OHM TERM EXTERNAL
3
• PCS/DCS • MMDS PORT 1 (0°) 4 • ISM PORT 2 (+90°) 6 • balanced amplifiers GROUND 2,5 • modulators
Outline Drawing
and Reel Available Tape st at no extra co Devices/Reel 20, 50, 100, 200, 500,1000, 3000
Reel Size 7”
Electrical Specifications
FREQ. RANGE (MHz)
ISOLATION (dB)
INSERTION LOSS (dB) Avg. of Coupled Outputs ABOVE 3 dB
PHASE UNBALANCE (Degrees)
AMPLITUDE UNBALANCE (dB)
VSWR (:1)
fL-fU
Typ. Min.
Typ. Max.
Typ. Max.
Typ. Max.
Typ.
0.5 0.3 0.2 0.6
1.2 1.2 1.2 1.2
(ON TOP)
1700-2700 1700-1800 1800-2000 2000-2400 2400-2700
(ON TOP)
+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications
21 22 30 30
18 18 20 20
0.4 0.4 0.4 0.5
0.7 0.7 0.7 0.9
3 2 3 3
6 6 6 6
1.0 0.8 0.8 1.0
1. For applications requiring DC voltage to be applied to the RF ports, add suffix letter "D" to part no. DC resistance to ground is 100 Mohms min.
Typical Performance Data
Frequency (MHz)
PCB Land Pattern
Outline Dimensions ( inch mm ) B .063 1.60
C .035 0.89
D .024 0.61
G .039 0.99
H .024 0.61
J .042 1.07
K .123 3.12
E .022 0.56
F .011 0.28
Demo Board MCL P/N: TB-255+ Suggested PCB Layout (PL-131)
S-1
S-2
3.12 3.68 3.24 3.55 3.33 3.44 3.40 3.37 3.45 3.33 3.48 3.32 3.48 3.33 3.45 3.37 3.40 3.44 3.33 3.54 3.28 3.61 3.23 3.68
0.56 0.31 0.12 0.03 0.12 0.16 0.15 0.08 0.04 0.22 0.33 0.45
Isolation (dB)
Phase Unbalance (deg.)
21.52 22.55 23.84 25.33 26.85 28.90 31.22 34.26 38.56 45.07 52.09 57.17
88.45 88.66 88.92 88.93 88.95 89.07 89.25 89.24 89.27 89.20 89.34 89.32
VSWR S
VSWR 1
VSWR 2
1.23 1.26 1.19 1.21 1.24 1.17 1.18 1.23 1.14 1.16 1.21 1.12 1.14 1.20 1.10 1.12 1.19 1.09 1.10 1.18 1.09 1.08 1.17 1.10 1.06 1.17 1.11 1.04 1.16 1.12 1.03 1.16 1.13 1.01 1.16 1.14
1. Total Loss = Insertion Loss + 3dB splitter loss. QCN-27+ TOTAL LOSS
wt grams .020
QCN-27+ ISOLATION
5.0
60 S-1
TOTAL LOSS (dB)
A .126 3.20
1700.00 1800.00 1900.00 2000.00 2100.00 2200.00 2300.00 2400.00 2500.00 2600.00 2650.00 2700.00
Amplitude Unbalance (dB)
S-2
50
4.0
ISOLATION (dB)
Suggested Layout, Tolerance to be within ±.002
Total Loss1 (dB)
3.0 2.0
40 30 20 10
1.0 1700 1825 1950 2075 2200 2325 2450 2575 2700 FREQUENCY (MHz)
0 1700 1825 1950 2075 2200 2325 2450 2575 2700 FREQUENCY (MHz)
electrical schematic (Note 1)
QCN-27+ PHASE UNBALANCE PHASE UNBALANCE (deg.)
95 93 91 89 87 85 1700 1825 1950 2075 2200 2325 2450 2575 2700 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500
[email protected]
REV. L M158161 QCN-27 ED-10849/5 AD/RS/CP/AM 160920
