Transcript
TECHNICAL INFORMATION SPECIFICATIONS SOLAR PANEL
1-watt monocrystalline 5V DC, 200mAh
POWER STATION BATTERY
Lithium Poly, 3.7V/5000mAh (18.5Wh)
CHARGE PROTECTION
Overcharge, over discharge, overload protection and short circuit protection
POWER STATION INPUT
5V DC/1.5A
POWER STATION OUTPUT
5V 1A 5V 2A (high speed)
OPERATING TEMPERATURE
32° – 120°F (0° – 49°C)
WEIGHT
8 oz. (227g)
DIMENSIONS
6” x 4” x 0.7” (152 x 102 x 17.53 mm)
ACCESSORIES INCLUDED
Multifunction USB Cable • Standard USB tip • Micro USB tip • iPhone® Lightening tip • iPhone® 32-pin tip Carabineer clip
Power Station (5000mAh)
OPERATING INSTRUCTIONS
RoHS COMPLIANT
CHARGING & OPERATING TIMES
Estimate only. Actual times depend on available sunshine, Power Bank battery level, and device battery condition.
Charge 5000mAh Power Station
Solar collector, up to 25 hours USB, 6-8 hours
Recharge portable electronic devices from a fully charged 5000mAh Power Station
iPhone 6, up to 3 times, Galaxy 5, up to 2 times Tablets will charge up to 25% of battery capacity depending on model and size
Aervoe Industries, Inc. Gardnerville, NV 89410 • (800) 227-0196 www.aervoe.com •
[email protected] Sierra Wave is a registered trademark of Aervoe Industries, Inc. 9652inst CS:5/15
Sierra Wave® Power Station (5000mAh) #9652 CHARGING THE POWER STATION Built-in Solar Collector 1. Place the POWER STATION outdoors with the SOLAR COLLECTOR facing the sun. The rate of charge will vary based on available solar energy, location, and time of day. 2. Battery capacity may be monitored using the LED CHARGING INDICATORS on the Power Station.
This rugged 5000mAh Power Station keeps portable electronics charged using USB power ports. It can be charged with the built-in solar panel or through any USB power connection. 120V AC or 12V DC charging is also possible when using a wall or vehicle charging plugs (not included). IMPORTANT SAFEGUARDS Warning: to reduce the risk of electric shock or damage to this product, please read the following. • Read all instructions before operating and keep for later reference • Administer close supervision when using around children • Do not store in direct sunlight, on hot surfaces, or in temperatures over 140°F, such as a hot vehicle • Do not submerge this unit or any accessories in liquid. This unit is weather resistant but not waterproof. • Do not drop, crush, or puncture • Protect the solar panel from scratches and dust • Do not use in flammable or explosive areas • Discontinue use if electronic components or accessories are damaged. To avoid risk of shock, injury and damage to the unit, do not disassemble. Warranty is void if anyone other than an authorized Aervoe Service Center associate performs any repair. Contact Aervoe for assistance. • Recharge at least every 3 months to keep the battery conditioned • Includes built-in overcharge, over discharge, and short circuit protection
Green LEDs
USB Power Sources Plug into any power source that offers 5V USB including computers, vehicles, or detachable AC wall or 12V vehicle charger (not included). 1. Option #1: Pull out the built-in USB adapter cable and plug it into any USB power source. 2. Option #2: Connect the micro USB tip on the included MULTIFUNCTION USB CABLE into the MICRO USB DC IN port. Connect the standard USB plug into any USB power source. 3. Battery capacity may be monitored using the LED charging indicators on the POWER STATION.
Solar Collector
CHARGING DEVICES The Multifunction USB Cable includes the iPhone® Lightning tip, 32-pin iPhone® tip, and a micro USB tip to charge most portable electronics. You can use any device specific USB charging adapter. Charging through the Power Station 1. The Power Station can be used to charge devices using either the 1A USB port or 2A USB port. The 2A port provides a higher rate of charge and should be used to charge tablets. 2. Connect the standard USB plug on the MULTIFUNCTION USB CABLE to the 1A or 2A USB output ports and the other end to your device using the appropriate tip. 3. Both USB ports may be used at the same time. 4. Battery capacity may be monitored using the LED charging indicators on the POWER STATION.
LED Charging Indicators
Multifunction USB Cable
1A USB
2A USB
Built-In USB Input
Red/Blue LED Power/Meter Button
PARTS IDENTIFICATION
DC IN (Micro USB)
BATTERY CAPACITY METER & INDICATOR LIGHTS 1. Red/Blue LED = Red when solar or photovoltaic light is available Blue when the POWER/METER button is pushed. It will go off after 30 seconds. 2. Green LEDs. Press the POWER/METER button to check the status of charging. • 1 green LED = <25% capacity • 2 green LEDs = <50% capacity Battery Meter • 3 green LEDs = <75% capacity • 4 green LEDs = 100% capacity
Standard USB
iPhone 32-pin
iPhone Lightning
Micro USB
TROUBLESHOOTING Warning: To avoid shock, injury or damage to the unit, do not disassemble the Power Station. The warranty will be void if you do so. Contact Aervoe Industries, Inc. for assistance. 1. The Power Station is not charging from the solar collector or auxiliary USB power source • If solar charging, make sure there is bright sun and it is angled toward the sun. Reference the solar use guide above for positioning information. • Make sure all connectors are attached securely 2. Your device is not charging properly when connected to the Power Station. • Make sure all connectors are attached securely • Verify that your device specifications are compatible with this unit
