Preview only show first 10 pages with watermark. For full document please download

Power Supply Unit Ps2 Datasheet

   EMBED

Share

Transcript

Data Sheet No 292 Issue C Jan 2002 HAWKER LEVEL CONTROL SYSTEMS Power Supply Unit PS2 Selectable Output 24VDC or 33VDC Selectable Input 115V or 230V 50Hz Produces Power for: Sondaloop Ultrasonic Transmitter, Flexicap & Flexicap 4-20, Capacitance Probes & Pressure Transmitters. PS s Cu 2/P tom er Re /T fere nc Tr e ip Optional Single Trip Amp Adjustable Re Anywhere over 4-21mA range, it also monitors the sensor for cable breaks & mains failure. DC Po Technical Specifications Power Supply Mains Input: 115/230V 50Hz - fuse protected Output: Norminal 24V DC @ 250ohms or 33V DC @ 650ohms thermal fuse protected. j Ad lay O/ we r ke P V 24V 33 r Ltd ics 7 on . 3 77 ctr L U.K453 Ele5 9Ax 0121 B4 Fa w am 911 Ha ingh453 8 m 1 Birl: 012 Panel Mounting PS2/P/T Te Power Required: 6 watts Temp Range: Wall Mounting PS2 -10 to 60 0 C Optional Trip Amp Relay De-energised Point: Adjustable between 4 & 21mA Hysteresis: Approx 0.2 to 0.6mA Relay: S.P.C.O. volt free contacts rated 5A @ 230VAC or 30VDC Relay state: Normally Energised. Cable Break: > 1.5mA approx (Relay De-energised). Red LED: Illuminated when relay energised. Green LED: Power On. Adj Pot for RelayTrip Point + Relay On Power 24V 33V - E +V -V E C NO NC N Ammeter Sensor Relay Contacts L E Mains Input Types Available PS2: Wall mounting polycarbonate with clear lid to IP65, 134W x 97H x 40D. PS2/P/T Panel mounting to IP40, 51W x 110H x 105D. PS2/CO Chassis only 108W x 97H x 40D Because of continuing development we reserve the right to change the specifications without notice HAWKER ELECTRONICS LTD. 57 The Avenue, Rubery Industrial Estate, Birmingham B45 9AL, ENGLAND Telephone :+44 (0)121-453-8911 Fax : +44(0)121-453-3777 e.mail: [email protected] www.hawker-electronics.co.uk UKAS QUALITY MANAGEMENT 003 FM 10000 BRITISH MADE D636.cdr