Preview only show first 10 pages with watermark. For full document please download

Power-tool Actuated Block Pull Clamps

   EMBED

Share

Transcript

PTPD POWER-TOOL ACTUATED BLOCK PULL CLAMPS Body Contact Pad Locating Bushing SCM４４０ steel SCM４３５ steel S45C steel Quenched and tempered Quenched and tempered Black oxide finish Black oxide finish Black oxide finish For M10 Cap Screws Locating Bushings(included) Part Number PTPD12 Weight (kg) 2.3 Options of Operating Tool Spanner or Socket Wrench Nut Runner (for robotization) Impact Wrench Clamping Force (N) 12,000 40 6,000 20 Note Do not use applying a greater torque than allowable for a long period of time, to avoid damage. When an impact wrench is used, the torque-settable type is recommended. Features 1. Ideal for 5-Axis Machining Block Pull Clamps mount under a workpiece making its surfaces to be machined fully open for the cutting tool. This allows completing multiple machining processes at a time. Clamping Screws Block Pull Clamps 3. Adjustability for Best Positioning If used in conjunction with Power-Tool Actuated Remote-Control Units, Block Pull Clamps can be installed at the best possible position under the workpiece. 2. Better Workability Block Pull Clamps allow fastening a workpiece easily, unlike the conventional method of fastening with hexagon head screws from below. Workpiece Workpiece Workpiece Spanner Hexagon Head Screw Conventional Method Power-Tool Actuated Remote-Control Unit IMAO Method How To Use Spacing Between Two Clamping-Screw Holes Recommended Tolerance : ±0.3 Clamping Screws Block Pull Clamps Locating Pins Locating Pins Locating repeatability in using Block Pull Clamps alone is ±0.3. Install locating pins for better accuracy, as shown above. Air Gun To remove metal chips in the mechanism, take off the side covers and blow Cover Removal air from above.