Preview only show first 10 pages with watermark. For full document please download

-powercom Pc3 Fuctions At A Glance

   EMBED


Share

Transcript

PowerCom PC3 – Office 2007 & up Presentation Functions At A Glance PowerCom Shortcut Keys : Function Name Next Action Stop Polling Connect Base Continue Polling Display Chart Clear Data &Revote Show / Hide Absentee Start / Stop Music Start / Stop Timer Impromptu Questions Show / Hide Weight Winners Roll Call/Keypad Serial# List Election Polling DetaiL Blink COrrect Answer Demographic Cut View Priority     Available From Shortcut Any Screen Polling Screen Polling Screen Stop Screen Stop Screen Stop or Display Screen Polling Screen Polling Screen Polling Screen Stop or Display Screen or Non Polling Slide Display Screen Display Screen Polling Screen Stop or Display Screen Stop or Display Screen Display Screen Display Screen Display Screen of Priority Question Space Bar Space Bar or S B C Space Bar or D R A M T I U W K E L O Alt + Numeric Key Ctrl + Numeric Key Right click on Poller Box for all available action shortcuts. To display Demographic Analysis, use Alt + 1 to Alt + 9 to switch between Demographic question. To display Priority answers in sequence, use Ctrl + 1 to Ctrl + 9 to display Priority answer choices. To display Import Demographic Analysis, use Shift + 1 to Shift + 9 to switch Demographic question After Polling Stops or result is displayed, you can use these PowerPoint shortcut keys: Function Name First Slide Last Slide End The Slide Show Next Slide Previous Slide Next Action Display / Close A Black Screen Display / Close First Slide Last Slide End The Slide Show Shortcut Home, 1+ Enter End ESC Page Down Page Up Space Bar B or PERIOD COMMA Home, 1+ Enter End ESC Notes: 1. 2. 3. PowerCom strongly recommends you to use "Dual monitors with presenter view" for slide show. Please review "Dual monitors with presenter view" online help topic before using Dual Monitor display. During the polling, PowerCom short cut keys are disabled, except SpaceBar and PowerPoint applicable short cut keys. When a slide loses focus, the short cut keys may not work properly. When this happensclick the Poller box to regain focus and the short cut keys will work again. www.PowerComARS.com 1-212-997-2000. You can arrange a standby support by emailing to [email protected] 5/2015 V 2.49 $5.95 PowerCom PC3 – Office 2007 & up Keypad Match Keypad Match to Base Station 1. 2. 3. 4. 5. Plug-in the base and make sure it’s properly detected. Select Hardware Settings under Device From Hardware Settings tab, click on Start Match Press “.” and “-“ on the keypad simultaneously for 3 seconds. The keypad will beep for three times and display the current base station channel no. when matching is successful. 6. Once matched,a message indicating it was successful will be displayed on the Hardware settings screen. 7. Go back to step #4 to match other keypads to the base. Notes : 1. Matching the keypadswill help to guarantee that only authorized keypads can join in the voting. 2. Once a keypad was matched to a specific base station, and you want to use the keypad with another base, you have to match the keypad again. Set up Keypad ID Number Set up Keypad ID Setting upthe ID for a single keypad: 1. Plug-in the base and make sure it’s properly detected. 2. Select Hardware Settings under Device. 3. Go to the Keypad Settings tab. 4. Enterthe keypad ID value at Set up New ID for one keypad. 5. Press and hold OK on the keypad, then click on Apply. 6. The new ID no. will appear on the keypad screen. Setting up IDs for multiple keypads : 1. Plug-in the base and make sure it is properly detected. 2. Select Hardware Settings under Device. 3. Go to Keypad Settings tab. 4. Enter keypad ID value at “Starting ID from”. 5. Press “Start” to start the setup process. 6. Press OK on the first keypad until the new ID shows up on the keypads. ID Value at “Starting ID from” box will change to the next number for the second keypad. 7. Press OK on the second keypad until the new ID shows up. Keep this step for the rest of the keypads. 8. Press “Stop” to end the setup process. www.PowerComARS.com 1-212-997-2000. You can arrange a standby support by emailing to [email protected] 5/2015 V 2.49 $5.95