Transcript
distributed in Qld by
A
Slimline remote driver MLE-PDR-A
S
Compact integral driver MLE-PDR-S
M
Slimline integral driver MLE-PDR-M
eldoLED
POWERdrive
HIGH PERFORMANCE RGBW LED DRIVER From small standalone installations to large complex networks, the 4 channel POWERdrive is the complete LED drive solution - compatible with favoured lighting control protocols. High resolution dimming with gamma-corrected curves produce superior digital colour palettes - a visual feast for the pure enjoyment of colour.
Edition 2
2013
POWERdrive Technical Specifications
eldoLED
POWERdrive features
eldoLED develops and produces high-performance, Drive, Networking and Control solutions for both RGBW and tunable white solid-state lighting applications. eldoLED proprietary digital technologies and algorithms form the basis of the products’ specific features such as small footprint, optimum power efficiency, configurability, high control resolutions and robust thermal management.
• DALI, DMX/RDM, LedSync and 1-10V compatible. • Hybrid ‘HydraDrive’ 20-bit resolution • Smooth dimming control from 100% to 0.1% with gamma-corrected curve • High efficiency over a wide power and voltage range • Each LED current output is individually configurable • Intuitive 3-button user interface & display screen • LEDcode/NTC interface for robust thermal management • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox USB and free PC software
Megabay proudly integrates this innovative LED drive technology as part of our complete lighting solution.
www.eldoled.com
Specifications POWERdrive Type
A Slimline - remote
M
Compact - integral
Slimline - integral
120 - 277 VAC, 50-60Hz
Voltage input Current - maximum
S
1.05A @ 120V/60Hz / 0.5A @ 230V/50Hz / 0.45A @ 277V/60Hz
Inrush current
35A 240μs @ 120V/60Hz / 67A 240μs @ 230V/50Hz / 75A 240μs @ 277V/60Hz
Standby power
< 0.5W 3kV ( L to N ), 4kV ( L/N to GND )
Surge protection Efficiency
90% at full load, ≥ 87% above 50W output - refer to graphs > 0.94 - refer to graphs
Power factor
<10%
THD @ 100% load - maximum OUTPUT Power
100W max
Voltage
60V max, 57V typ 200 - 1,050 mA ( configurable )
Current range
+/- 5% accuracy
Current Weight
890g
915g
810g
ENVIRONMENTAL RATINGS -20°C ~ 50°C
Ambient temperature range Maximum case temperature Locations Self rise
90°C
83°C
85°C
For use in damp and dry locations Typical self-rise of 30ºC at maximum load in free air without heat sink
CONTROL COMPATIBILITY DALI DMX512 External analog input
Edition 2
2013
DALI control gear IEC 62386-207 DMX512A and RDM explore & address ( ANSI E1.20 ) control gear Standard 1-10V dimming controls or POTS
MEGABAY LED LUMINAIRES
2
POWERdrive Specifications
Specification Code Select from the available options to specify each LED driver. Example shown below.
MLE-PDR
A Model
A
Slimline remote external driver
S
Compact integral driver ( IP66 weatherproof enclosure optional )
M
Slimline integral driver
Lifetime data
Efficiency data
Power factor data 277V - 60Hz
120V - 60Hz 230V - 50Hz
230V - 50Hz
Life (kHours)
Eff (%)
60
92
1.05
55
90
1.00
50
88
0.95
45
86
0.90
40
84
0.85
35
82
0.80
30
80 Ta 30
35
40
45
50
55
0.75 Vout (V)
78 60
˚C
277V - 60Hz
Pf
120V - 60Hz
0
Life vs Ambient temperature
10
20
30
40
50
Vout (V)
0.70
60
0
10
Efficiency vs Output Voltage 25 ºC ambient temperature
20
30
40
50
60
Power factor vs Output Voltage 25 ºC ambient temperature
All measurements have been carried out at maximum load in free air without heat sink. All lifetime-related figures are the result of simulations. Actual lifetime tests are ongoing.
Accessories
IP66 enclosure Weatherproof enclosure for compact integral POWERdrive S
TOOLbox pro In conjunction with the freely available PC software allows programming of unique show sequences, managing show libraries and setting driver parameters.
MLE-PDR-IP66 USB
MLE-PDR-USB
Dimensions A
All measurements are shown in mm.
Slimline remote driver
M
Slimline integral driver
30
388
30
370
42
S
Compact integral driver
41
IP66 enclosure 30
230
61
300.5
103.5
80
IP66 waterproof enclosure for POWERdrive S
Edition 2
2013
MEGABAY LED LUMINAIRES
3
POWERdrive Wiring Schematic
Quick Connections
9mm
All POWERdrive models use the quick connector for ease of installation.
1
2
1 Strip the wire as shown 2 Depress 3 Feed wire into opening
3
Slimline remote driver
As supplied
A 120-277 VAC
{
N L
4 LED groups, 4 control channels
DA + DA DA + DA -
M +
Ext in Ext in +
–
LEDcode / thermal feedback
LedSync out shield LedSync out LedSync out +
DMX in + DMX in DMX in shield LedSync out + LedSync out LedSync out shield
Compact integral driver
S
4 LED groups, 4 control channels
Ext in + Ext in -
L N
120-277 VAC
DALI
{
{
{
+ + -
DALI
{
Plastic end covers removed to reveal wiring connections
DMX in shield DMX in DMX in +
{
+ –
LEDcode / thermal feedback
DALI
120-277 VAC
DMX in shield DMX in DMX in +
N L
4 LED groups, 4 control channels
Slimline integral driver DA + DA DA + DA -
M +
Ext in Ext in +
–
LEDcode / thermal feedback
LedSync out shield LedSync out LedSync out +
Edition 2
2013
MEGABAY LED LUMINAIRES
4
RGBW Accessories
RGBW Luminaire Connections RGBW luminaires require the Quick Link Connector and the 10 Core Cable to connect multiple luminaires in series. Termination of the system can be achieved by either one of the two methods shown. Megabay Quick link connector
Megabay 10 core cable Eg. 5 metre cable MLE-RGBW-5M
specify cable length in metres
MLE-RGBW-?M
MLE-RGBW-QK
Dimensions 10 Core Cable
Quick Link Connector 54mm LUMINAIRE
42mm flex approx
OUTPUT
15mm
INPUT
54mm
48mm
INPUT
LUMINAIRE
OUTPUT
8.5mm Ø
Cable & Quick Link Connections 1 2 3 4 5 6 7 8 9 10
10 core cable
Edition 2
Coloured Wires
Wire No.
Red + Red Green + Green Blue + Blue White + White Therm + Therm -
Red + Red Green + Green Blue + Blue White + White -
Input
The last luminaire terminates the system, if no luminaire is present terminate with looped wires as shown.
Output
Quick Link Connector Groups Coding
Wire
Wire Colour
Control Channel
Wire 1
Red
Red ( + ) Channel 1
Red
Wire 2
Red / White Stripe
Red ( - ) Channel 1
Black
Wire 3
Green
Green ( + ) Channel 2
Green
Wire 4
Green / White Stripe
Green ( - ) Channel 2
Black
Wire 5
Blue
Blue ( + ) Channel 3
Blue
Wire 6
Blue / White Stripe
Blue ( - ) Channel 3
Black
Wire 7
White
White ( + ) Channel 4
Yellow
Wire 8
Black / White Stripe
White ( - ) Channel 4
Wire 9
Light Grey
Thermal feedback
Orange
Wire 10
Dark Grey
Thermal feedback
Orange
2013
Luminaire
System Termination
Connector Colour
Black
MEGABAY LED LUMINAIRES
5
www.megabay.com/powerdrive scan this QR code with your smartphone to view online
www.megabay.com 12-14 Industrial Avenue, Caloundra, Qld 4551, Australia PO Box 3517, Caloundra DC, Qld 4551, Australia Ph : +61 7 5491 7433 Fax : +61 7 5491 7338 Email :
[email protected]
Copyright © FEBRUARY 2013 Megabay Lighting Enterprises (AUST) Pty. Ltd. all rights reserved. Trademarks are the property of Megabay or their respective owners. CREETM is a registered trademark of CREE Inc. eldoLED is a registered trademark of eldoLED B.V. the Netherlands. Product specifications are subject to change without prior notice to ensure you receive a superior product. All content is the exclusive property of Megabay and by downloading you agree to the Terms of Use as documented on the Megabay website at www.megabay.com/terms-of-use Edition 2
2013
