Transcript
Powerline ECO Control Starter-Kit
V3 - 24.11.2011
Inhalt Adapter installieren myStrom Energiemanagement Anzeigen (LEDs) und Knöpfe Hilfe Wichtige Sicherheitshinweise
S. 4 S. 6 S. 8 S. 9 S. 11
D
Contenu Installer l’adaptateur Gestion d’énergie myStrom Voyants (LEDs) et boutons Aide Importantes consignes de sécurité
p. 12 p. 14 p. 16 p. 17 p. 19
F
Contenuto Installare l’adattatore Gestione energetica myStrom Indicatori (LEDs) e tasti Supporto Importanti avvertenze di sicurezza
p. 20 p. 22 p. 24 p. 25 p. 27
Content Installing the adapters myStrom - Energy Management Displays (LEDs) and buttons Help Important safety instructions
p. 28 p. 30 p. 32 p. 33 p. 35
27
I
E
Installing the adapters myStrom Powerline ECO Control adapters are plug & play – no configuration necessary. Follow the 3 steps and you are ready to go.
Important Plug the Powerline adapters directly into the wall power socket to reduce interferences.
Plug the RED Powerline adapter directly into the wall power socket next to the DSL modem. Connect the adapter and the DSL modem using the provided network cable.
Plug the WHITE Powerline adapter directly into any wall power socket.
28
You have now successfully installed your Powerline ECO Control adapters. Register your Powerline ECO Control adapters on www.mystrom.ch and start with Energy Management and Home-Automation (see next page).
E 29
myStrom Energiemanagement myStrom is a simple energy management system. It allows you to switch devices on an off via Internet and control their energy usage. Register your adapters on www.mystrom.ch and assign them to a room in your home. This allows you to control the devices connected to the adapter via www.mystrom.ch, measure their energy usage and see the costs they generate. For registration see next page.
myStrom Basic (free)
Switch adapters/devices on and off
myStrom Premium (for a fee)
Measure the energy usage
Energy usage and costs overview
Define a schedule for the devices and save costs Switch devices on and off via Smartphone. The App is available for für iPhone® and Android™. SMS alert/alarm when energy usage is high
30
Register and start
Open a free myStrom Account www.mystrom.ch – «register here».
Fill out the registration form completely - myStrom will then send you a confirmation email.
You must then confirm your account by clicking on the link provided in this email.
Register the adapters Register the red adapter first Enter the red adapter’s code and confirm Then register the white adapter «My devices» – «register a new adapter», enter the code and confirm
You can now start using Energy Management.
E 31
Displays (LED) and buttons Powerline connection Excellent connection Good connection Low connection — possible reason: The adapter is not connected directly to the wall socket. No connection Power Power on Energy saving mode Out of service Pairing Button This button allows you to add additional Powerline adapters to your existing Powerline network. Reset Button Resetting your adapter. Press the button for (10 seconds red / 2 seconds white) and release if all LEDs successively light up in green. On/off Switch adapters/devices on and off
32
Help – Reconnect the adapters to each other (Pairing) In case the adapters no longer communicate with each other or have been reset, you have to pair them again. To execute the Pairing process, plug the adapters directly into the wall sockets in the same room. Push the Pairing button of the RED adapter for about a second. «
» starts to blink in green.
If it does not blink, please repeat this step.
1 sec.
Push the Pairing button of the WHITE adapter for about a second. «
» starts to blink in green.
After a few seconds « « » light up.
» and
1 sec.
If it does not blink, repeat this step. You have now successfully connected/paired the two adapters.
33
E
Help - Various/FAQ Always connect the Powerline adapters to the wall socket - why? Powerline adapters react sensitively to interference sources that are also connected to your electrical network. Those interference sources can be power adapters, chargers etc. When you plug the Powerline adapters directly into the wall socket and then connect the devices to the Powerline adapter, the interferences are minimized through the integrated filter and the adapters work more reliably. For this reason the adapters cover all 3 plugs of your wall socket. Possible interferences Interferences occur mainly when you are using the following devices - microwave oven, hair dryer, vacuum cleaner, iron, power drill ... Powerline is not working The good functioning of Powerline strongly depends on the existing electrical network. If the adapters are not working, plug 2 adapters to wall sockets in the same room. If the Powerline LED lights up in green, the Powerline adapters are working without any problems. The reason is most probably your electrical network that may contain old fuses or phase jumps. In this case your electrician might be able to help. Otherwise you can return the adapters after 14 days and get your money back. Further help topics – www.mystrom.ch/en/help/faq
34
Important safety instructions It is important to read and understand the following safety instructions before operating the Powerline adapter. – – – – – – – – – – – – – –
–
Do not exceed a 2250 Watt load on the adapter. The adapter should only be used in a dry place. Do not use the adapter in bathrooms. The adapter must not be opened by unqualified personnel. Do not try to repair the adapter yourself. You risk being electrocuted! Under no circumstances should the adapter come into contact with water or other liquids. Always use the supplied network cable to connect the adapter. Do not insert any objects into the openings of the adapter. To shut it off, unplug it from the socket. Do not expose the adapter to direct sunlight. Slots and openings on the housing are used for ventilation and must not be blocked or covered. The adapter must not be set up next to a radiator. The adapter should only be used in places where there is adequate ventilation. Before cleaning the housing, disconnect the adapter from the mains. Never use water, thinner, benzene, alcohol or other strong detergents to clean the adapter as this may damage the housing. Use only a slightly damp cloth. In the event of damage, disconnect the adapter from the mains.
The following situations constitute damage – – – – – –
if if if if if if
the plug is damaged liquid is spilled on the adapter an object gets inside the adapter the adapter is exposed to rain or water the adapter does not work the adapter housing is damaged
E 35
Router
1/
Max. 3/
Max. 25/
