Transcript
Optical Camera Link Cable Assemblies
FOCLBN-D/FOCLFN-D Full Configuration Non-PoCL High Flex Cycles Cable FEATURES
Supports Full Configuration 8 bit - 8 tap Enables transmission up to 100 m Needs to supply power from out side for operating the cable assemblies Can select the position where power supply wires are connected High flex cycles cable suitable for continuous motion 10M cycles or more (inner radius: 50 mm) of flex life test results
GENERAL SPECIFICATIONS Parameters
Full Configuration Specifications
Configuration
Full Configuration 8 bit - 8 tap (Note 1) Both FOCLBN-D and FOCLFN-D need to be used. (Note 2)
Camera Clock Rate
20 ~ 85 MHz
Transmission Length
~ 100 m
Cable Type
High flex cycles cable suitable for continuous motion.
Electrical Connector
MDR Straight Plug / SDR Straight Plug
Power Supply Voltage
+12 V DC
Power Supply Type to Cable
External Power Supply of which wires position is selectable either at plug of Grabber-board side (standard type) or at plug of Camera-side
Minimum Bending Radius
30 mm (inner radius)
Flex Life (Slide Bending)
10M cycles ore more (inner radius: 50 mm) (Note 3)
Power Consumption
2.74 W (Typ., Total value of FOCLBN-D and FOCLFN-D)
Cannot support 8 bit - 10 tap (DECA mode). Needs to connect FOCLBN-D to connector 1 and connect FOCLFN-D to connector 2. This value is the results demonstrated by our flex life test and is not guaranteed.
EXAMPLE FOR CONNECTING Full Configuration (8 bit - 8 tap) Connector 1 (Base-side)
+12V DC
FOCLBN-D +12V DC
FOCLFN-D Camera
Power Supply to Camera Connector 2 (Medium/Full -side)
Grabber Board
PINOUT OF CONNECTOR FOCLBN-D (Base-side, Connector 1) Camera-side
FOCLFN-D (Medium/Full-side, Connector 2)
Grabber-side
Camera-side
Grabber-side
Pin
Function
Pin
Function
Pin
Function
Pin
Function
Pin
Function
Pin
Function
Pin
Function
Pin
Function
1
GND
14
GND
1
GND
14
GND
1
GND
14
GND
1
GND
14
GND
2
X0-
15
X0+
2
CC4-
15
CC4+
2
Y0-
15
Y0+
2
Z3+
15
Z3-
3
X1-
16
X1+
3
CC3+
16
CC3-
3
Y1-
16
Y1+
3
Zclk+
16
Zclk-
4
X2-
17
X2+
4
CC2-
17
CC2+
4
Y2-
17
Y2+
4
Z2+
17
Z2-
5
Xclk-
18
Xclk+
5
CC1+
18
CC1-
5
Yclk-
18
Yclk+
5
Z1+
18
Z1-
6
X3-
19
X3+
6
SerTFG+
19
SerTFG-
6
Y3-
19
Y3+
6
Z0+
19
Z0-
7
SerTC+
20
SerTC-
7
SerTC-
20
SerTC+
7
Terminated
20
Terminated
7
Terminated
20
Terminated
8
SerTFG-
21
SerTFG+
8
X3+
21
X3-
8
Z0-
21
Z0+
8
Y3+
21
Y3-
9
CC1-
22
CC1+
8
Xclk+
22
Xclk-
9
Z1-
22
Z1+
8
Yclk+
22
Yclk-
10
CC2+
23
CC2-
9
X2+
23
X2-
10
Z2-
23
Z2+
9
Y2+
23
Y2-
11
CC3-
24
CC3+
11
X1+
24
X1-
11
Zclk-
24
Zclk+
11
Y1+
24
Y1-
12
CC4+
25
CC4-
12
X0+
25
X0-
12
Z3-
25
Z3+
12
Y0+
25
Y0-
13
GND
26
GND
13
GND
26
GND
13
GND
26
GND
13
GND
26
GND
DIMENSIONS MDR Plug
(Camera-side)
SDR Plug
(Camera-side with power supply wires)
[Unit: mm] For the detail, please refer to the document of connector dimensions. If you have any questions, please do not hesitate to contact us.
ORDERING INFORMATION [Length] [Camera-side connector] 01, 03, 05, 07, 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, A0(= 100 m)
MDR: M SDR: S
Straight Plug (male): PS [Grabber-side connector]
[Configuration] Base: B Full: F
FOCLBN－20D－SPS FOCLFN－20D－SPS
[Power supply to cable] Non-PoCL: N
(e.g.)
－MP －MP
[Cable] High Flex Cycles: D
FOCLBN－20D－MPS－MP FOCLFN－20D－MPS－MP
Fujikura Ltd. Datacom Products Department 1-5-1, Kiba, Koto-ku, Tokyo 135-8512, Japan Phone: +81-3-5606-1473 Fax: +81-3-5606-1598 E-mail: www.fujikura.co.jp
Power supply wires at Grabber-side: blank at Camera-side: 3
MDR: M SDR: S
Plug
(male)
October, 2016 CC93-11-16-0117(1) Contents are subjected to change without notice. Copyright © 2016 Fujikura Ltd. All right reserved.
