Transcript
EOO16X65V12D6
Multi band Multi ports Antenna with internal replaceable RET 3XPol / 1x 698-960, 2x 1710-2690 MHz / H65˚, H65˚ / 16, 18 dBi / 1.5˚-12˚, 2˚-12˚ Multi-band Panel Frequency Range HPBW
R1 698-960 65°
Y1 1710-2690 65°
Y2 1710-2690 65°
Model No.
EOO16X65V12D6
Connectors
880-960 15.9
Frequency Range Gain at mid Tilt Horizontal Pattern: Azimuth Beamwidth Front-to-Back Ratio Cross Polar Discrimination at Boresight Cross Polar Discrimination over Sector Vertical Pattern: Elevation Beamwidth Electrical Downtilt continuously adjustable Tilt Accuracy First Upper Side Lobe Suppression
698-806 15.3
790-862 15.7
R1 Connector 1-2 698-960 824-894 15.8
(°) (dB) (dB) (dB)
69 > 25 > 19 > 10
67 > 26 > 19 >9
67 > 25 > 20 >9
66 > 25 > 18 >8
(°)
11.5
10.5
10.3
10.0
(MHz) (dBi)
(°) (°) (dB)
1.5 - 12 < 0.5
< 0.5
< 0.5
< 0.6
> 16
> 16
> 16
> 16
Cross Polar Isolation (dB) Inter band isolation (dB) VSWR Polarization Intermodulation IM3 (dBc) Impedance (Ω) Max. Effective Power per Port Values based on NGMN-P-BASTA requirements
> 28 > 30 < 1.5 +45°, –45° < -150 (2x43 dBm carrier) 50 250
Connectors 1710-1880 17.1
1850-1990 17.2
Y1-Y2 ,Connector 3-6 1710-2690 1920-2170 17.6
(°) (dB)
67 > 25
65 > 25
63 > 25
61 > 25
63 > 25
Cross Polar Discrimination at Boresight
(dB)
> 20
> 24
> 25
> 23
> 19
Cross Polar Discrimination over Sector
(dB)
> 12
> 10
> 10
>8
>8
7.1
6.4
6.1
5.4
4.8
Frequency Range Gain at mid Tilt Horizontal Pattern: Azimuth Beamwidth Front-to-Back Ratio
Vertical Pattern: Elevation Beamwidth Electrical Downtilt continuously adjustable Tilt Accuracy First Upper Side Lobe Suppression
(MHz) (dBi)
(°) (°) (°) (dB)
Cross Polar Isolation (dB) Inter band isolation (dB) VSWR Polarization Intermodulation IM3 (dBc) Impedance (Ω) Max. Effective Power per Port Values based on NGMN-P-BASTA requirements
GCA-02-16 REV.1
2300-2400 17.9
2500-2690 17.6
2-12 < 0.3
< 0.3
< 0.3
< 0.3
< 0.3
> 16
> 16
> 16
> 16
> 16
> 28 > 30 < 1.5 +45°, –45° < -150 (2x43 dBm carrier) 50 250 W
© COPYRIGHT – GAMMA NU, INC.
Mechanical Specifications Connector Type & Quantity Connector Position Dimension (H x W x D) Weight Wind Load (@100 mph) Max. Wind Speed Operation temperature Radome (Color) Product Environmental compliance
6 x 7-16 DIN Female or 4.3-10 DIN Female Bottom 2000 x 350 x 160 | 78.7 x 13.7 x 6.2 28 | 62 Front 1344, Side 615, Rear 1344 150 - 40 ~ 70 ASA+PC (Gray) ROHS compliant
(mm/in) (kg/lb) (N) (mph) (°)
Remote Electrical Tilt (RET) Internal RET Protocol
ACS-RP100 (Internal Replaceable RET) 3GPP/AISG 2.0
Bottom view
R1
698-960 MHz
Y1, Y2
1710-2690 MHz
Mechanical Drawing & Configuration Table
Y1
GCA-02-16 REV.1
R1
Y2
© COPYRIGHT – GAMMA NU, INC.
