Transcript
POWER SOLUTIONS Standard
Technology Technology 09/2013
PST14 DC-DC, 150W, 300W, 500W Conduction cooled, low profile 35mm
Web PST14
PST14, chassis mount format in 3 power level packages, is very easy to configure in several outputs, parallel or serie operations up to few kWs.
PST14C
PST14B
PST14A
3D modelisation on www.powersystemtechnology.com
PST14B24-12500-RT
Part number examples : PST14C24-12150-T (Micro package, -40°C)
• 12, 24, 48, 72, 110Vdc IN • Input filtering EN55022 & transient protection • Reverse polarity protection • Output from 3.3V to 48Vdc • Operating temperature -20°C +100°C baseplate • Options : H : 15mm Heatsink M : Ruggedized MIL-STD810E, MIL-STD461E CE102, MIL-STD1275A (B and A versions only) R : Redundant N+1 T : -40°C V : Conformal coating • Signals : Remote ON/OFF Input and Output LED Output adjust POWERGood Remote senses (A and B versions only) • Accessories compatible for the 3 packages up to 4 units : Input parallel bus bar (12, 24, 48VdcIN only) Output parallel bus bar Output serial bus bar Output N+1 bus bar including diode Inhibition and parallel cable JST to Screw type conversion PCB • IP67 enclosures, semi standard versions and assemblies available PST14C DC-DC, 150W Small size 100 x 61 x 35mm - Micro PST14B DC-DC, 250W Flexible for parallel and series combinations 140 x 61 x 35mm - Mini Parallel and redundancy N+1 operation PST14A DC-DC, 500W up to few kWs 225 x 61 x 35mm - Maxi Parallel and redundancy N+1 operation
PST14B24-12500-T (2 x Mini package, -40°C, parallel bus bar + input bus bar + parallel cable included) PST14B24-12500-RT (Mini package, -40°C, N+1 bus bar + input bus bar + parallel cable included) PST14A24-12500-T (2 x Maxi package, -40°C) PST14A24-12500-24500-H (2 x Maxi package, 2 outputs, heatsink)
Contact us for configuration
PST23 DC-DC, 150W, single output Conduction cooled
Web PST23
PST23, DC-DC in chassis mount format incorporates input filtering,reverse polarity and transient protection, Vicor Micro module, very robust mechanical for railways and severe environment, reverse polarity.
V1
PST23 Vin Vout Pout 12 3V3 50 5 75 24 48 12 100 72 15 150 110 24 28 48
Option C T V W
• 12, 24, 48, 72, 110Vdc IN • 1 output from 3.3V to 48Vdc • 100 x 78 x 20mm • Signals : Inhibit, output adjust • Options : C : Molex connector, T : -40°C, V : conformal coating, W : Wago connector • Transient protection EN50155 • EMI : EN50121-3-2 • Safety : EN60950 • Connector : Fast ON, Molex, Wago • Operating temperature -20°C +100°C baseplate Contact us for configuration
PST07 DC-DC, 55W, 1-3 outputs Very low profile, wide input range
Web PST07
PST07, very wide input range and very low profile (20mm) DC-DC has been designed for railways and industrial applications.
PST07 Vin 12 24 48 110
V1
V 2 / V3
Vout Vout N N 0 : 3V3 4 :+/-12V 1 : 5V 5 :+/-24V 2 : 12V 3 : 15V
Option T V
Exemple : PST0712-1-4
• 12, 24, 48 or 36-140Vdc IN • Transient protection : EN50155 • EMI : EN55022A, EN50121-3-2 • V1 : From 3.3V to 15Vdc / 30W max. • V2 & V3 : +/-12Vdc & +/-24Vdc / 25W max. • 3U x 4TE x 160mm • Signals : Remote ON/OFF, LED in front panel • Options : T : -40°C V : conformal coating • Safety : EN60950 • Operating temperature : -20°C +71°C ambiant • DIN 41612 H15 connector Contact us for configuration
PST20 AC-DC, 300W & 600W, 1-4 outputs VME 64X
Web PST20
PST20 is a modular and configurable AC-DC for VME applications. • 85-265Vac IN, PFC (consult factory for DC input) • Transient protection • EN61000-3-2 & MIL-STD-461 CE101 compliant • EMI : MIL-STD-461 CE102 conducted • 6U x 8 TE x 160mm • Signals : AC Fail, Sysreset, POWERGood signals • Options : T : -40°C V : conformal coating • Safety : EN60950 • Operating temperature : -20°C +85°C heatsink • DIN 41612 H15 (x 2) connector Contact us for configuration
PST22 DC-DC, 450W, 1-3 outputs 3U Eurocard for railways
V1
V2
V3
PST22 Vin Vout Pout Vout Pout Vout Pout 12 N N N N N N 24 3V3 50 3V3 50 3V3 LP 48 5 75 5 75 5 50 72 12 100 12 100 12 75 110 15 150 15 150 15 100 24 24 24 150 28 28 28 48 48 48
Option F R S T V X
LP : Low power output configuration.
See datasheet for all configurations Semi standard versions available
Web PST22
Specially designed for railways applications, PST22 incorporates dedicated fonctionalities like active MOSFET circuit for redundancy. The unit is based on 3 Vicor Micro modules and output 3 can be configured with a low power discrete solution. • 12, 24, 48, 72, 110Vdc IN • 1 to 3 isolated outputs from 3.3V to 48Vdc • 3U x 8 TE x 160mm (or 4TE) • Signals : Inhibition, senses (V1), POWERGood, LED • Options : F : without front panel, R : N+1 redundancy, S : low profile 4 TE, T : -40°C, V : conformal coating, X : extra energy storage • Transient protection EN50155 • EMI : EN50155, EN50121-3-2 conducted • Safety : EN60950 • Output voltage adjustment • Operating temperature : -20° +71°C ambiant • Integration of energy storage in place of V3 for EN50155 S2 compliance • DIN 41612 H15 connector Contact us for configuration
PST24 DC-DC, 240W, 1-3 outputs Extremely low profile conduction cooled
V1
V2
V3
PST24 Vin Vout Pout Vout Pout Vout Pout N N N N N N 24 28 2V5 120 2V5 120 2V5 10 3V3 3V3 48 3V3 5 5 5 12 12 24 24 32 32 48 48
Web PST24
Based on Vicor VI-CHIP, PST24 is a very flat (15mm) conduction cooled DC-DC including all protections for military and avionic environment in 28Vin version. • 24, 28, 48Vdc IN • Transient protection : MIL-STD704A, MIL-STD1275A (28Vin) • EMI : MIL-STD461E CE101, CE102 (28Vin) • V1 & V2 : From 2.5V to 48Vdc / 120W • V3 : From 2.5V to 5Vdc / 10W • 190 x 90 x 15mm • Signals : Remote ON/OFF, output adjust, LED • Options : H : heatsink T : -55°C V : conformal coating • Safety : EN60950 • Environmental : MIL-STD810E Contact us for configuration • Operating temperature : -40°C +100°C baseplate
Option H T V
o
PST25 DC-DC, 200W & 1000W, up to 4 outputs Web PST25 VME conduction cooled format
PST25 VME conduction cooled uses wedgelock for heat dissipation to the chassis allowing minimum height of 20mm max. • 24, 48Vdc IN • Transient protection • 1 to 4 outputs from 3.3V to 48Vdc • 3U or 6U x 4TE x 160mm • Signals : PGood, PFail, remote ON/OFF, LED • Options : H : heatsink T : -40°C V : conformal coating • Safety : EN60950 • Environmental : MIL-STD810 • 47pin Positronic connector • Operating temperature : -20°C +100°C heatsink
PST25A
PST25B V1
V2
V3
V4
PST25A Vin Vout Pout Vout Pout Vout Pout Vout Pout N N N N N N N N 24 48 3V3 150 3V3 150 3V3 150 3V3 150 5 200 5 200 5 200 5 200 12 250 12 250 12 250 12 250 15 300 15 300 15 300 15 300 24 24 24 24 28 28 28 28 48 48 48 48
Option H T V
Contact us for configuration
PST26 AC-DC, 150W & 300W, 1-3 outputs Eurocard for industrial applications
Web PST26
PST26 is a Eurocard AC-DC available in single, dual or triple outputs with flexible output voltages configuration. Based on Vicor Mini or Micro, this PSU can operate in industrial or severe environments.
V1
PST26150 Vout Pout 3V3 150 5 12 15 24 28 48
V 2 / V3
Vout Pout 3V3 25 5 12 +/-12 15 +/-15
V2, V3 : Available if V1>5V (V1+V2+V3) < 150W
V1
Option F T V
V2
PST26300 Vout Pout Vout Pout 3V3 150 3V3 150 5 300* 5 12 12 15 15 24 24 28 28 48 48
Option F T V
* : For single output only
• 85-265Vac IN PFC (100-350Vdc) • Transient protection • EMI : EN55022, MIL-STD461E (consult factory) • Very low inrush current limit with active circuit • V1, V2, V3 : From 3.3V to 48Vdc up to 300W • 3U x 8 TE x 160mm • Signals : Remote ON/OFF, LED in front panel • Options : F : without front panel, T : -40°C, V : conformal coating • Safety : EN60950 • Environmental : MIL-STD810E (shocks & vibrations) • Operating temperature : -20°C +100°C heatsink • DIN 41612 H15 connector
Contact us for configuration
PST21 AC-DC, 150W, 300W, 600W, 1200W Conduction cooled, low profile
Web PST21
PST21, chassis mount configurable PSU, incorporates PFC front end with very low inrush limiting circuit, supplying output boards based on Vicor Micro, Mini, Maxi module with flexible output voltages configurations. Fanless, this solution is suitable for high reliability applications.
PST21D
PST21B
PST21C
PST21A
3D modelisation on www.powersystemtechnology.com
• 85-265Vac IN • Active PFC EN61000-3-2 • EMI : EN55022, MIL-STD461E CE102 (M option) • Very low inrush current limit with active circuit • Outputs from 3.3V to 48Vdc • Operating temperature : -20°C +100°C baseplate • Options : H : 15mm heatsink M : Ruggedized MIL-STD461E CE101 & 102, MIL-STD704A, MIL-STD810E T : -40°C V : conformal coating PST21D AC-DC, 150W 1 output 165 x 61 x 35mm - Micro Signals : Remote ON/OFF, Output adjust, POWERGood, Output LED PST21C AC-DC, 300W 1-2 outputs 200 x 80 x 40mm - Micro, Mini Signals : Remote ON/OFF, Output adjust, POWERGood, Output LED PST21B AC-DC, 600W 1-3 outputs 200 x 127 x 40mm - Micro, Mini Signals : Remote ON/OFF, Output adjust, POWERGood, Remote senses, Output LED Parallel or serie operations PST21A AC-DC, 1200W 1-6 outputs 255 x 127 x 40mm Configuration with Micro, Mini, Maxi boards Signals : Remote ON/OFF, Output adjust, POWERGood, Remote senses, Output LED Parallel or serie operations
Semi standard versions and IP67 enclosures available
See datasheet for all configurations. Contact us for configuration
CPCIAC AC-DC, 300W, 4 outputs CompactPCI® 3U format
Web CPCIAC
AC-DC compact PCI® compliant with PICMG2.11, the CPCIAC has been designed to provide more power than regular CPCI PSU. Compliant with MIL-STD standards, it is suitable for severe environments. • 85-265Vac IN active PFC • EMI filtering EN55022A, MIL-STD461 • Very low inrush current limit with active circuit • 4 outputs 3.3V, 5V, 12V, -12V • 300W max • Operating temperature : -40°C +55°C ambiant • Signals : Inhibition, enables, Power Fail, overtemp, remote senses on V1, V2 • Parallel operation with current sharing & N+1 rendundancy
CPCIDC : DC-DC version available. See web CPCIDC.
Contact us for configuration
Design
Manufacturing & Subcontracting
p Schematic capture & simulation p PCB layout p 3D mechanical modelisation p Software development p Through life support (TLS) / obsolescence
p SMT & through holes capabilities p RoHS or SnPb p Automatic Optical Inspection p Wiring & harnesses p Conformal coating p System integration
Tests and qualification
Quality
p EMI in-house prequalification p Functional testing p MIL-STD compliance p Serial numbered report
p ISO9001 & EN9100 p IPC610 level 2 & 3
Power System Technology
Z.A la Paillerie 61340 BERD’HUIS (France) Tel. +33 (0)2 33 83 94 94 Fax +33 (0)2 33 83 94 95
[email protected]
www.powersystemtechnology.com
