Transcript
POWERTUBE II 3000 POWER BANK USER MANUAL
POWERTUBE Ⅱ 3000 Thank you for purchasing POWERTUBE Ⅱ 3000. This product that has advanced charging management technology is specifically designed for charging and supplying power to USB supported (5V 1A) mobile phones, MP3 - MP4 players, tablets, digital cameras etc. Its small size, stylish design, reliability and portability will make it your indispensable assistant in your everyday life.
Product features ¥ Reliable SAMSUNG Lithium Ion battery. ¥ Integrated micro USB and Lightning connectors to the main body. No need to carry cables. ¥ Small size, easy to carry, provides power anytime and anywhere. ¥ While charging POWERTUBE Ⅱ, you can also charge your digital devices via USB. For safe and longer use of POWERTUBE Ⅱ and the connected device ¥ Overcurrent protection ¥ Overvoltage protection ¥ Undervoltage protection ¥ Overtemperature protection ¥ Short circuit protection TECHNICAL SPECIFICATIONS
POWERTUBE II 3000
Input Output Capacity Battery Battery Cycle Life Battery Charging Time Dimensions Weight
5V DC, 1A 5V DC, 1A 3000mAh SAMSUNG Li-Ion ≈1000 times 3 hour 113 x 36,6 x 21,98 mm 90 gr
Product Diagram Output Connector Micro USB
Output Connector Lightning
Do not open the connectors from this way Lighted On / Off Button
DC Input (Micro USB)
Operating Instructions ¥ Charging and supplying power to mobile phones/digital devices - To charge, please connect your (5V 1A) supported mobile phone/digital device to the MicroUSB or Lightning output connector of the POWERTUBE Ⅱ. - Turn on the POWERTUBE Ⅱ by pressing the On/Off button. - Red colored lamp on the On/Off button becomes lit and the mobile phone / digital device starts to charge. - While the battery capacity of the POWERTUBE Ⅱ decreases the rate at which the light blinks increases. - When your mobile phone/digital device is fully charged, remove it from the POWERTUBE Ⅱ. The POWERTUBE Ⅱ will switch off in 10 seconds automatically if no device connected to it. ¥ Charging the POWERTUBE Ⅱ - Please connect the USB end of Micro USB cable to a computer or any USB supported (5V 1A) charger. (Computer USB ports without dedicated USB 3.0 support may not charge sufficiently due to the lack of high current capacity. Therefore it is recommended to use a computer with USB 3.0 output or USB charger for charging.) - Then connect the other end to the (Micro USB) DC Input of the POWERTUBE Ⅱ. - Green colored light on the On/Off button turns on during charging. It turns off when the POWERTUBE Ⅱ is fully charged.
Instructions ¥ Please read the user manual carefully before initial use. Full charge the POWERTUBE Ⅱ before using. If the product will not be used for a while then charge it to its full capacity. Charge it every 3 - 4 months to maximize its life and performance. ¥ Do not expose the product to heat sources or fire as the battery in it may explode. ¥ Do not expose the product to moisture or rain. ¥ Do not keep jewellery, keys or other metal objects near the product to avoid damage to the input or output terminals. ¥ Do not contact the product with metal or sharp tools, do not drop it and do not put any heavy items on it. ¥ Do not attempt to disassemble, repair or change the battery pack as this would cause it to overheat, burn or explode. ¥ If the product emits an unusual odour, becomes abnormally hot, changes in colour or shape, please stop using it immediately. ¥ Do not insert or pull out the plug forcibly as this may cause damage to the product. ¥ Do not use strong chemicals or detergents to clean the product. ¥ Please use the computer’s USB port (5V 1A) or the Tuncmatik Mobile Chargers (5V 1A) to charge the product. Max. 1A. If you use a poor quality charger and cause any damage, our company cannot take any responsibility.
TUNCMATIK MÜŞTERİ HİZMETLERİ
0850 201 6 877 For Turkey Only
Üretici & İthalatcı / Manufacturer & Importer:
Tunçmatik Elektrik Malzemeleri Sanayi ve Ticaret A.Ş. Yenişehir Mah. İmar İskan Blokları Cad. No: 1BU 34779 Ataşehir, İstanbul, Turkey T : +90.216.314.51.51 F : +90.216.420.35.29
[email protected]
