Transcript
Powerware® 9125 UPS Product Snapshot Power Rating: 700-2000 VA Voltage: 120 Vac Frequency: 50/60 Hz (autosensing) Configuration: All models can be used as rackmount or tower units
I
nstalling an uninterruptible power
The Powerware 9125 makes sure its
system (UPS) can be the single most
batteries are always ready to handle power
cost-effective measure you can take to
disturbances by incorporating Advanced
protect your priceless data and equipment
Battery Management Plus (ABM Plus™),
from power disturbances, but in rugged
which uses sophisticated battery sensing
installations and mission-critical applica-
technology to double battery service life.
tions, you need more than just an average
In addition to optimizing recharge time,
UPS. You need the most feature-rich UPS
ABM Plus also provides up to 60 days
available on the market today–the new
notice of the end of useful battery service
Powerware 9125.
life so you have ample time to hot-swap
F e a ture s A
Fourth-Generation Online™ topology ensures continuous, clean power
A
Advanced Battery Management Plus (ABM Plus™) doubles battery service life
A
Additional, hot-swappable Extended Battery Modules (EBMs) extend backup times
A
Load Segments enable scheduled shutdowns and maximize backup time for critical devices
A
Two-in-one rack and tower form factor provides versatility
A
2U rack height conserves valuable rack space
A
FailSafe III and LanSafe III power management software included to ensure data integrity
A
Exclusive Triple Power Warranty (U.S. and Canada) • 10-Year Pro-Rated Warranty • 60-Day Money Back Guarantee • $25,000 Load Protection Guarantee
the batteries without ever having to shut Culminating 40 years of UPS design
down your connected equipment.
experience, Powerware’s Fourth-Generation Online™ topology not only offers the
Backed by the industry's longest warranty,
reliability and protection expected from an
the Powerware 9125 is the most versatile
online design, but also provides an
and innovative UPS in its power range.
operating efficiency of over 90 percent -
See for yourself how the unsurpassed relia-
yielding lower power costs, even in non-
bility of the Powerware 9125 can improve
optimal installation environments.
your productivity.
PO W E R I N G
T H E
WO R LD
Technical Specifications1 ABM Plus Doubles Battery Service Life The lead-acid batteries typically used in a UPS are considered viable as long as they can maintain backup times of at least half that of new batteries. The illustration to the right shows that batteries that are constantly trickle charged (as are virtually all other UPS batteries on the market today) reach the end of their useful life in less than half the time of batteries charged using ABM Plus. ABM Plus uses a three-stage charging technique that not only doubles battery service life, but also optimizes battery recharge time and provides up to a 60-day advanced notification of pending end of useful battery life. Data based upon tests performed by an independent battery manufacturer.
ELECTRICAL INPUT Nominal Voltage
120 Vac, autosensing (user-selectable for 100, 110, 120, & 127 Vac)
Voltage Range
80-144V (without using batteries)
Input Power Factor
>.95, typical
Frequency
50/60 Hz, autosensing
Frequency Range
45-65 Hz
ELECTRICAL OUTPUT On Utility Voltage Regulation
±3% of nominal
On Battery Voltage Regulation
±3% of nominal
C O M M U N I C AT I O N S Serial Port
RS-232 communications port standard
Communications Cable
6-foot communications cable included
ConnectUPS-M SNMP SNMP card adds direct control and monitoring Module (optional)2 capabilities in SNMP-based networks Multi-Port Module(optional)2
Equipped with (6) communications ports to provide serial communication to multiple devices
USB Module (optional)2
Allows UPS to communicate with Windows 98 computers via USB port; factory-installed option only
GENERAL Topology
True online, double-conversion
Diagnostics
Full system self-test on power up
Frequency Regulation ±3 Hz online; ±0.1 Hz on battery
UPS Bypass
Automatic on overload or UPS failure
Load Crest Factor
3 to 1 ratio
Dimensions and Weights
See Model Selection Guide
Internal Battery Type Sealed, lead-acid; maintenance free 700/1000 VA: (2) 12V, 9 Ah 1250-2000 VA: (4) 12V, 9 Ah
Safety Markings
UL, CSA, and NOM
EMC Markings
FCC Class B and VCCI Class II
EBM Battery Type
PW9125 24 EBM: (8) 12V, 9 Ah PW9125 48 EBM: (8) 12V, 9 Ah
Surge Suppression
IEEE/ANSI C62.41 Category B (formerly 587)
Audible Noise
<45 dBA (on utility); <50 dBA (on battery)
Battery Runtime
See Battery Runtimes on back page
Battery Replacement Hot-swappable internal and external batteries
Ambient Operating/ 0 to 40˚C (32 to 104˚F)/ Storage Temperature 0 to 25˚C (32 to 77˚F)
Recharge Time
<2 hrs. from complete discharge to 80% capacity at nominal line conditions
Relative Humidity
5 to 90%, non-condensing
REPO Port
Meets NEC code 645-11 intent and UL requirements
Allows start of UPS without utility input
Network Transient Protector
In and out jack for telephone/modem protection or 10Base-T network cable; UL497A tested
Efficiency
89-92%, depending on load
B AT T E R Y
Start-On-Battery
E N V I R O N M E N TA L
AND
SAFETY
1. Due to continuing product improvement programs, specifications are subject to change without notice. 2. Optional in place of RS-232 serial port.
Powerware 9125 Features Load Segments and X-Slot™ Communications Load Segments are groups of receptacles that can be independently controlled via LanSafe III/FailSafe III power management software, which is bundled with the Powerware 9125. Load Segments extend battery backup times for critical equipment. X-Slot: You have the option of replacing the standard communication port with the ConnectUPS-M SNMP Module, USB Module, or the Multi-Port Module (6 ports).
To preserve battery power for more critical equipment connected to Load Segment 1, shut down Load Segment 2 supporting less critical equipment.
Se ri e s 9 Power Prote c ti on True Online Design True online systems such as the Powerware 9125 are the only type of UPSs that completely isolated connected equipment from all 9 of the most common power problems: Power failures Sags Surges Brownouts
Shut down and power up Load Segments in userdefined sequence.
Line noise High voltage spikes Switching transients
Two-in-One Form Factor Install the Powerware 9125 as either a tower or rack-mount UPS.
Frequency variations Harmonic distortion
Up to 2000 VA of UPS power is packed into only 2U (3.5 inches) of rack space.
Even when presented with the most severe of these power problems, the Powerware 9125 output remains within a remarkable ±3% of nominal voltage, meaning that your critical system always receives clean power. In addition, the Powerware 9125 transfers to battery with no break in power, making it the perfect UPS for equipment in environments plagued by poor power. Front Panel Display
Tower
Rack-Mount with one EBM
Extended Battery Modules (EBMs) To extend battery backup times, you can connect multiple EBMs. Each EBM occupies 2U (3.5 inches) of rack space.
Replace Battery (ABM Plus notification)
Site Wiring Fault Overtemperature
Self-Test UPS On
Overload
On Battery
Load Level/ Battery Level
On Bypass
You can hot-swap both the standard internal batteries and EBMs without powering down the connected load. This makes it possible to extend the life of the UPS without interrupting your critical applications.
Powerware 9125 with two EBMs
Alarm Silence/ Self-Test
Off
On
Powerware® 9125 Model Selection Guide MODEL NUMBER
POWER OUT (VA/W AT T )
I N P U T /O U T P U T V O LTA G E (V A C ) 1
FREQUENCY (H Z ) 2
INPUT CONNECTION3
OUTPUT R E C E P TA C L E S 4
700/490
120
50/60
5-15P
(6) 5-15R
PW9125 700
DIMENSIONS (H X W X D) 5 3.5 x 17.0 x 19.4 in. 89 x 432 x 494 mm
WEIGHT (LB/KG)6 34/15
PW9125 1000
1000/700
120
50/60
5-15P
(6) 5-15R
PW9125 1250
1250/875
120
50/60
5-15P
(6) 5-15R
PW9125 1500
1500/1050
120
50/60
5-15P
(6) 5-15R
PW9125 2000
2000/1400
120
50/60
5-20P
(6) 5-15R
3.5 x 17.0 x 19.4 in. 89 x 432 x 494 mm 3.5 x 17.0 x 19.4 89 x 432 x 494 mm 3.5 x 17.0 x 19.4 89 x 432 x 494 mm 3.5 x 17.0 x 19.4 89 x 432 x 494 mm
-
Standard Connector
-
3.5 x 17.0 x 19.4 89 x 432 x 494 mm
65/29.5
-
Standard Connector
-
3.5 x 17.0 x 19.4 89 x 432 x 494 mm
65/29.5
34/15 50/23 50/23 50/23
O P T I O N A L E X T E N D E D B AT T E R Y M O D U L E S (EBM S ) PW9125 24 EBM 700/1000 VA models only
-
-
PW9125 48 EBM 1250-2000 VA models only -
-
1. Also user-selectable for 100, 110, and 127 Vac. 2. Automatic frequency selection. 3. 6-ft. line cord. 4. Divided into 2 Load Segments (receptacle groups). 5. Unit fits in standard 19-inch racks. Mounting kit is sold separately. For tower configurations, the unit stands 17.0 in. high and is 3.5 in. wide. 6. Add 8.5 lb. for shipping weight.
B AT T E R Y R U N T I M E S ( I N
MINUTES)
7 0 0 / 1 0 0 0 VA M O D E L S LOAD 200 VA/140W 400 VA/280W 700 VA/490W 850 VA/595W 1000 VA/700W
S TA N D A R D I N T E R N A L B AT T E R I E S 37 19 9 6 5
1 EBM 271 142 72 59 48
2 EBM S 546 278 156 124 104
1 EBM 177 96 76 61 46 37 30 26
2 EBM S 331 180 142 115 87 70 57 49
1 2 5 0 - 2 0 0 0 VA M O D E L S LOAD 400 VA/280W 700 VA/490W 850 VA/595W 1000 VA/700W 1250 VA/875W 1500 VA/1050W 1800 VA/1260W 2000 VA/1400W
S TA N D A R D I N T E R N A L B AT T E R I E S 46 25 21 16 11 8 6 5
3 EBM S 501 272 214 174 131 106 85 74
4 EBM S 682 370 292 237 179 144 116 100
These tables provide typical information. Runtimes are approximate and may vary with equipment, configuration, battery age, temperature, etc.
Rear Panel
A
B
C
A Bottom end in tower configuration
G
E
D
F
B C D E F G
X-Slot™: Standard RS-232 Single Port Module (1 port); optional MultiPort Module (6 ports), USB Module, and ConnectUPS-M SNMP Module Circuit Breakers (2000 VA model only) Load Segment 2; (3) 5-15 receptacles Load Segment 1; (3) 5-15 receptacles REPO Port and Network Transient Protector 6-foot line cord with 5-15P (5-20P for 2000 VA model) Extended Battery Module (EBM) connector
Powerware Corporation Corporate Headquarters
Latin America/Caribbean
Japan
Sunrise, FL: 954.835.1180
Shinagawa Tokyo: 813.3447.5251
8609 Six Forks Road Raleigh, NC 27615 U.S.A. Toll Free: 1.877.797.9273 (PWRWARE) or 919.872.3020 Fax: 1.800.753.9433 or 919.870.3411 E-mail:
[email protected] www.powerware.com
Europe/Middle East/Africa
Australia and South Pacific
Berkshire, England: 44.1753.608700
Sydney, Australia: 61.2.9878.5000
Southeast Asia
Canada
Singapore: 65.861.9877
Toronto, Ontario: 416.798.0112
9125FXA Revision 10/99 Reprint 1/00
China and North Asia Hong Kong: 852.2745.6682
An Invensys company
