Transcript
Powrmatic Climapac Condenser-less Air Conditioner w w w. p ow r m a t i c. co. u k
C L I M A PA C 35
Efficient Discreet
Simple Installation
21
Complete Packaged Unit
No Outdoor Condenser
Complete packaged unit with built in evaporator and condenser, no external unit is required. Its high wall mounted design enables airflow to be directed out from the bottom of the unit and extra PTC heating from the side mounted distinctive speaker style heaters.
Mounted on an external wall with a discreet connection to the outside, Climapac units provide cooling, heating from a heat pump and supplementary heating from ‘speaker style’ PTC (positive temperature coefficient) ceramic heaters.
Application Flexibility
Attractive Design
The Climapac features clean lines in a contemporary, eye-catching style that will complement any décor with and no sight of an outdoor condenser it makes the unit ideal for hotel rooms, restaurants and many other hospitality applications. It also allows for air conditioning on listed buildings. The only connection it needs to the outside is two discreet holes through an outside wall. As a result, there is minimum impact on the building’s exterior and complies with many regulations.
This highly attractive polished black finish twin duct unit will add equal value to the office, apartment or hotel room. The unit is fully remote controlled with temperature and timer options, and comes with a subtle LCD display, conveniently located on the lower front panel of the unit.
22
Efficient Heating & Cooling
No F-Gas Certificate Required
The Climapac range of twin duct high wall air conditioners from Powrmatic offers both cooling and heating options from the heat pump. The Climapac has an impressive low energy electric heating capacity of 0.879kW input and 2.23kW output.
The Climapac does not require a F-Gas certified engineer to install saving you as significant amount on installation costs.
Climapac Technical Specification Technical Data Cooling Capacity Capacity Heating Capacity Power Supply Power Input (kW) Electrical
Starting Amp Running Amp Combined Load Running Amp
Performance (3 Fan Speeds)
Weights Inlet & Outlet Duct
Climapac 8,054
kW
2.362
Btu/h
7,706 (13,163 including electric heater)
kW
2.23 (3.86 including electric heater)
V~. Hz, Ph
230, 50, 1
Cooling
0.904
Heating
0.879
Cooling
11
Heating
9.8
Cooling
4.4
Heating
3.9
Heating
10.3/10.7
EER
W/W
2.61
COP
W/W
2.63
Airflow Volume
m3/h
380
Noise Level
dB(A)
<55
°C
18 °C / 30°C
WxHxD
mm
1020 x 430 x 195
Net Weight
kg
42
kg
47
inches
8
Temperature Level Min / Max Dimensions
U.M Btu/h
Gross Weight Diameter
mm
200
Refrigerant Gas R410A Refrigerant Charge
R410A g
640
- Note: A condensate drain is required to be fitted, from the rear drain point to discharge condensed water accumulated during operation -
23
Yo u r A re a S a l e s M a n a g e r s Dedicated Air Con Sales Managers A/C Business Development Manager
Paul Greenough 07971 079 726
[email protected]
Northern Region
Darryl Redfearn 07531 342 154
[email protected]
Southern Region
Thomas Gibson 07739 224 757
[email protected]
All Powrmatic Product Area Sales Managers Tony Delaney
+(353) 0866 040 613
[email protected]
John Thompson
07971 079711
[email protected]
Alan Yates
Midea Technical Support
07812 095 964
[email protected]
0800 8247 804
Dave Greaves
07766 061 514
[email protected]
Martin Arden
07971 079 717
[email protected]
Chris Micallef Midea Technical Support
0800 8247 804
Chris Warry
07971 079724
[email protected]
UK Office
Ireland Office
tel: +44 (0) 1460 53535 fax: +44 (0) 1460 52341 e-mail:
[email protected] web: www.powrmatic.co.uk
tel: +353 (0) 1452 1533 fax: +353 (0) 1452 1764 e-mail:
[email protected] web: www.powrmatic.ie
Powrmatic Ireland 45 Broomhill Close Tallaght Dublin 24
Powrmatic Limited Hort Bridge Ilminster Somerset TA19 9PS
Ian Lee
07860 726 780
[email protected]
Powrmatic pursues a policy of continuous improvement in both design and performance of its products and therefore reserves the right to change, amend or vary specifications without notice. Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested parties should contact the Company to confirm whether any material alterations have been since publication of this brochure. Issue 5.3 May 2015
26