Transcript
Rack Mount PCs
PR1091 Industrial Automation - Products and Configurations
PR1091 BASIC SYSTEM Basic configuration
Intel Celeron M 370 ▪ 1.5GHz ▪ 512 MB RAM ▪ Backplane 4 x PCI ▪ 1 x PICMG 1.0
Intel Celeron M 370 ▪ 1.5 GHz, 400MHz front side bus, 1MB cache ▪ socket 478 µFC-PGA CPU
Intel Pentium M740 ▪ 1.73 GHz, 533MHz front side bus, 2MB cache ▪ socket 478 µFC-PGA Intel Pentium M 760 ▪ 2 GHz, 533MHz front side bus, 2GB cache ▪ socket 478 µFC-PGA
512 MB ▪ 1 SODIMM module DDR2 PC5300 RAM MEMORY
1 GB ▪ 1 SODIMM module DDR2 PC6400 2 GB ▪ 2 SODIMM modules DDR2 PC6400, 1 GB each OPTIONS
HDD 2.5" / SSD 2,5" SATA installation kit, (HDD/SSD not included) SSD / HDD
SSD 2,5" SATA (Solid State Disk) HDD 320GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer HDD 500GB 2,5" ▪ SATA 2, 3Gb/s ▪ 5400rpm, 8 MB buffer
DVD DRIVES
Kit DVD-RW PATA 8x4x24x10x Slim ▪ H=0.5" ▪ black bezel Kit FDD 3.5" 1.44 MB Slim + DVD-RW PATA 8x4x24x10x Slim ▪ H=1" ▪ black bezel Warranty extension to 18 months on basic system and its variants
WARRANTY EXTENSION
Warranty extension to 24 months on basic system and its variants Warranty extension to 36 months on basic system and its variants
2012.01
pg. 114 / 156
Rel. 01
Rack Mount PCs
PR1091 TECHNICAL SPECIFICATIONS Case
19" rack mount
Overall dimensions & weight
See details on related section
Power Supply
230VAC ▪ 130W, autoranging
Motherboard
Passive bus type, ASEM 901 ▪ hardware system for temperature and voltage board diagnostics
Chipset
Intel® 915GME + ICH6M
Graphic accelerator engine
Intel® GMA900 (Integrated on-chip Intel® 915GME)
Video controller
Integrated on-chip Intel® 915GME with standard analog VGA interface (external)
Video RAM (shared)
64/128 MB selectable in system setup
RAM memory sockets
2 x SODIMM 200-pin module
RAM memory
DDR2 SODIMM type ▪ PC5300
Minimum system memory
512 MB
Maximum system memory
2 GB
Mass storage interfaces
1 x FDD ▪ 1 x ATA/100 (Master, Slave) ▪ 2 x SATA 1 1,5Gb/s integrated on-board
On-board options predisposition
1 x Compact Flash type II slot, internal access
Bus expansions slots
2 x PCI full size
Front access interfaces
2 x USB 2.0
Rear Interfaces on MB
1 x PS/2 (K/M) ▪1 x Ethernet 10/100 Mbps (RJ45) ▪1 x Ethernet 10/100/1000 Mbps (RJ45) ▪ 1 x analog VGA (DB15-F - 2048x1536 QXGA)
Rear interfaces (not on MB)
2 x RS-232 DB9M
Environmental specifications
Operating temperature: 0 ÷ +45°C ▪ Storage temperature: -20 ÷ +60°C ▪ humidity: 80% (non-condensing)
Standard warranty
12 months ▪ warranty management by ASEM headquarters
OVERALL DIMENSIONS (mm)
EXPANSION SLOTS AND COMMUNICATION PORTS ON PR1091 - ASEM NATIVE CONFIGURATION
1 x FDD
FRONT VIEW
1 x CD/DVD-RW
1 x PS/2
REAR VIEW PS Plug
2012.01
2 x USB
2 x PCI full size
pg. 115 / 156
1 x LAN 10/100Mbps (RJ45)
1 x VGA
1 x LAN 10/100/1000Mbps (RJ45) 2 x RS232 DB9
Rel. 01