Transcript
Preface Thank you for purchasing our products, this product is for the traffic accident today hard evidence of specialized research and development of a product; at the same time also meet other occasions demand, can be used in the meeting record, monitoring and evidence obtaining, location shooting, video evidence, can let you of the use of a machine, let your life more rich and colorful. This product combines wide dynamic digital industry leading camera, no leakage of seconds, seamless circular camera, ultra wide angle shooting, with display real-time playback, mobile detection camera, parking guardtechnology in one; streamline design of unique fashion, favored by the vast number of consumers. This manual will detail how to install, operate, product parameter and matters needing attention. Please read carefully and please safekeepingbefore use, we hope that our products can meet your needs and long term service to you! But because the specifications may be due to upgrade, update and other reasons do change, refer to the actual product, without prior notice. The manufacturer reserves without prior notice, to change thetechnology of direct rights. Copyright infringement/ privacy notice Please note that this product is for personal use only, its method of useshall not commit domestic or international copyright / privacy laws. Thatimage is tot personal use only recorded, not foreign free to publish spread; in addition to using this product recorded performances, exhibitions orcommercial activities of the image may in some cases infringe copyright or the legal rights and interests. Installation notes This product should be installed near the rearview mirror, in order to get the best view. To determine whether the lens in the windshield wiper range, ensure good vision, also good even in the rainy environment effect. Don't touch the lens with the fingers, because the finger grease may remain in video or photographic lens, cause is not clear, so please clean the lensregularly. The matters needing attention The use of the original factory standard charger That can not be privately to dismantling machine, avoid the influence of the scope of warranty The modified power line please find professional construction Products accessories Following the standard list and selecting list. If there is any missing or damaged items, please contact your dealer immediately. Standard
Bracket
Car charger
Product description of structure
USB
Manual
Host keys and interface description No.
name
Operating instructions
1
MODE
For video / picture / the mode button to switch between playback function;
2
On the turn key
3
Under the
Menu options, downward selection function keys; standby or video mode, digital
4
menu
Continuous short press this key can switch each other in the settings menu;
5
Standby key
Press this button, the screen becomes black will enter standby mode;
6
TF card slot
TF memory card slot, please install in the correct direction prompt;
Menu options to choose, on the function keys; standby or video mode, digitalzoom function keys;
Camera / camera / validation keys, camera mode short press the key to startthe camera, 7
OK
another short press stop camera; Photo mode short press the key to take photos; menu mode to confirm key;
8
Av-out interface
Connect the monitor through it, the recorder in recording the image transmitted directly to the display;;
9
HDMI output
HD output port, used to connect high-definition display devices ;
10
Bracket mouth
The recorder is suspended from the front windshield.;
11
USB interface
Used to connect the PC data transmission; the power supply interface, provide working power supply;
12
Keyswitchmachine Long press the on / off; short press the on / off screen
13
Horn
Voice broadcast;
14
Infrared light
In the case of the lighting is not ideal, can choose to open
15
microphone
The tape receiving port;
16
reset button
System restart reset button;
Recorder Installed 1, insert a memory card: please follow the device memory card gap suggeststhe right direction insert a memory card, press the memory card until thecracking of a, is inserted in place so far. The recorder video storage of high speed card, pay attention to the memory card must be high speed card (above CLASS6). Note: the new card used for the first time on the card format, please use this machine. 2, remove the memory card: according to the memory cardslot, pop. Note: the equipment in the boot state, do not remove or insert the memory card, so as not to damage the memory card. 3, the installation in the vehicle rearview mirror in front of the windshield. To determine the 3M adhesive buckle installation location specific, tear offsticker and put it firmly pasted on the windscreen on the. The product host behind holes at the 3M adhesive buckle claws, the downward force will be fixed on the buckle machine. 4, connect the power supply The first scene product has the unique design and power supplyprinciple, we provide two kinds of feasible scheme for consumers: 1 if the need to connect the DVD vehicle navigation equipment, can get the power from the car ACC circuit through a dedicated step-down video line, and the AV interface and navigation video interface connection. This way of use need professional construction personnel to operate, non professionalsdo not unauthorized modification, Install wiring way suggested reference.
Note: the wiring can be car charger to extend the line along the top of the windshield of the car decorative plate hidden installation, as shown in the picture above. 5, equlpment on / off The automatic on / off: automobile engine once launched, the deviceautomatically boot. Equipment in the boot, that is to start the automaticcamera Once the car flameout, the device will automatically save the record and in 15 seconds to turn off the power. The manual on / off: manual boot, then long press host
button, shutdownis also host
key long press.
Initial logger settings Set the date and time: 1、because the machine has switched the camera's automatic functions, you need to press the OK button click, the device enters the standby state. 2、and then press the M button twice, by pressing , or to select the date / time, then press the OK button to enter the setting 3 、 or by pressing the buttons to adjust the value, press the OK button to enter another field. Until the completion date and time settings, press M exit. Recorder Recording Operations 1, when the car engine is started, the device is automatically turned on and start recording. When the engine stalled, then it will automatically stop recording. Or press the OK button. Way manually stop recording. Note: Some vehicles powered car charger interface is often when the engine stalled, the power supply will continue to work. If you encounter such a situation, take the following steps: Open the manual way off / off the device, or the car charger from a car cigarette lighter port unplugged. 2. Other types of camera: Press the OK button, then start recording ; press the OK button again, then stop recording. Note: (1) every 3,5,10minute video, it will save time, please refer to the circulation camera menu. (2) The equipment will be saved in the camera memory card, if a memory card is full, the oldest file is automatically overwritten memory card. (3) emergency or for gravity sensing camera, video can not be automatically overwritten, you need to manually delete. 3、Emergency camera Note: If you start a gravity sensor, and detects a collision, the device will automatically lock the current record video will not be overwritten. Recorder camera operator 1. Press the
key to switch to the camera mode, camera icon in the upper left corner of the screen display.
2. Press the OK button to take pictures, take pictures of the screen flashes once to indicate camera complete. Video / photo playback operations 1, as in the camera mode, you need to press the OK button to stop recording.
2. Press the playback
key to switch to the playback mode, the upper left corner of the screen to display the
iron.
3. Press key up or down to select the file. 4. Press the OK button to play the selected video file ; short press again to pause playback. Menu setting operation 1, if you are recording, need to press the OK button to stop recording. 2. Short press once to M ring up the setup menu, twice on the menu page. 3, by a short press or key, you can cycle up and down to select items in each set. 4. Select the settings you want to change, press the OK button to enter the changes through short. 5. After setting short key M to exit standby mode. Special features: 1, gravity sensor function When the gravity acceleration starts, the machine will automatically save the video when the accident occurred was not delete the file. Gravity sensor can be adjusted in the menu high - medium - low, medium factory default. 2, file locking feature The imaging process, the
key is pressed, the machine will not delete the current video is saved as a file.
3, parking guard function 1) parking guards opened, when the vehicle stalled, tachograph into the automatic shutdown procedures, body if you receive external vibration generated by the tachograph will open the camera, automatically shut down after a record 10-15 seconds ; when the body is detected again after the shock, again start camera function. 2) Parking for guarding video camera 1080P 30 frames / sec, and the file is automatically locked. Note: The parking guard function must only work in the case of tachograph automatic shutdown, manual startup or shutdown, the parking guard does not work. 4,
motion detection function; If the motion detection after a short press OK to start recording 10 seconds after the camera automatically switches to standby mode motion detection, motion detection standby mode, the upper left corner of the screen there is a flashing yellow dots, when an object is detected when moving, the recorder start recording, the yellow flashing light spot becomes red spot ; motion detection start time of 10-30 seconds after the end of the motion detection motion detection machine automatically enters standby mode, the upper left corner of the screen to switch to the yellow dot flashes; when once again detects moving objects, the camera function starts again! When the G-sensor gravity sensor starts, the key icon will appear on the screen indicates the current video is locked video ; 5, USB mode The USB line is connected to the computer, the recorder will automatically pop up the USB menu, there will be the following options: 1) disk Access in this mode can be video or photo file.
2) camera Select this mode will bring up the USB video equipment, may carry on the real-time web photo or video chat, the use of a PC computer camera. 6、Battery instructions Battery indicator, please refer to the: Sufficient power A low power Low battery The electricity shortage In the on vehicle power supply, red charging indicator exhibit of lanterns in the process of charging is lit, the charging time is about 180 minutes, the redcharge indicator exhibit of lanterns off automatically after charging. Note: This equipment is to follow the vehicle driving state long time working, the built-in battery only for parking off to save the file and design, solidbattery operating time length is limited, please link vehicle power in daily use. 7、RESET If in the use process, the machine is abnormal or crash situation, through theneedle fine through the holes touch shell press the RESET key to machinesystem reset operation. Display interface icons
1
：Camera icon indicates camera mode ； ：Camera icon indicates camera mode ； ：Playback icon, indicating the playback mode；
2 Flashing red indicates that the device in the camera work ; yellow dot blinking motion detection device in standby
3
：Gravity sensor icon
After opening the gravity sensing this icon will be displayed on the screen ; indicates the recording process, when the external shock exceeds the set value, the current camera video will be locked, deleted files can not be saved as a non- covering Lock icon is displayed when the video ; 4:
：Night vision icon; Short press the power switch, open and close lamp, or in the menu Settings. Open the
lamp, the screen shows the figure 5、
：lock icon is displayed when the video；
When the G-sensor gravity sensor starts, the key icon will appear on the screen indicates the current video is locked video ; 6、
: Recording function Open icon: Recording function close icon Open the Settings menu and synchronized recording function on or off this icon appears, indicating the
current recording function on or off ; camera during the short press the Menu key, you can quickly open and close the record 7、00:00:00 White font - memory cards remaining recording time / red font - current segment recording time ; After inserting a memory card, the camera displays standby time remaining space of the memory card, display white font ; imaging process, the camera displays the current time- segmented, red font ; 8、1080FHD: Video resolution icons ; display the currently selected video resolution ; 9、
Parking guard icon ; display icons for parking guard function turned on
10、
Battery level icon ; shows the current charge ;
11、22：16：49 Time display shows the current standard time ; before using it for initial setup ; 12、2014/01/01 ：Date display, showing the current standard dates before using it for initial setup ; 13、
：Motion detection icon ; the left side of the screen to display the icon, indicating that the feature is activated.
14、
：EV exposure compensation icon indicates the currently selected exposure parameters ;
15 、
： Wide dynamic icon on the left side of the screen to display the icon, indicating that the feature is activated.
Recommendations often open. 16、
：Cycle time imaging segment icon representing the cycle time of one minute imaging ;
Menu options are:3-5-10-Off
Settings Menu Options
Explanation
Available options
Resolution
Set the video resolution
1080FHD、720P、VGA
3minute, 5 minutes, 10minutes, turn off, ; if you choose to Loop recording
When setting up each video file length
close the case, the card will not automatically cycle full coverage.
WDR
Wide Dynamic automatic adjustment of light
On, Off, the proposed full-time open
Exposure
Underexposed, dim the screen, you need to fill +0.0、-1/3、-2/3、-10、-4/3、-5/3、-2.0、+2.0、+5/3、+4/3、
Compensation
light
+10+2/3、+1/3
Motion Detection
In standby mode, when the screen has
On, Off
Sound recording
moved to the detection of automatic video
On, Off
Date Label
Camera video watermark date
On, Off
Gravity sensor
Collision generated video never be covered
High, medium, low, off
Date / Time
Date and Time
You can set the year, month, day, hour, minute, second
Beep
During operation, the key is with sound
On, Off
Language Settings
Language operating menu
Light frequency
Lights flicker frequency
50HZ. 60HZ,
Automatic shutdown
No automatic shutdown operating state
1minute, 3minutes, 5minutes, off
Night Lights
Fill light in the dark state by [R
On, Off
Traditional,
Simplified
Chinese,
Russian,
Japanese,
French, Italian, German, Spanish, English, Korean
After parking stall, body if you receive external Parking guard
vibration generated by the tachograph will open On, Off camera
License Plate
You can delete memory card data above
Format
A00000 SD
The default setting
Restore factory settings
Cancel, OK
Screen Saver
Recorder automatically turns off the display work On, Off
Version
Software version shipped
software version number
Product Specifications: Product Name
live HD tachograph
Division date Support
Product Features
Extremely wide angle of 170 degrees,1080P Full HD
Vector Media
G-sensor
Built-in ( under the car accident case of emergency save, not to be deleted)
Built in memory (total amount: 1024MB)
Camera mode
1200M
LCD screen size
3.0 inch high definition LCD screen
Photo format
JPEG
Shot
A + grade high-resolution 170-degree ultra- wide-angle lens
Memory Card
TF ( maximum support64GB)
Microphone
Support
Language
Russian, English, Chinese Chinese( Traditional ), Korean, Japanese, etc.
File Format
MOV
Built-in stereo Support
Video Resolution
1920*1080P
video format
H. 264, Audio: AAC
Color effects
Standard
1280*720P
IR
Support
Video Format
PAL/NTSC
Current Frequency
50HZ/60HZ
Continuous loop recording Seamless loop recording, no leakage seconds
Truck switch
Support auto ignition on, turn off
Motion detection
Support
1: USB-Disk
USB Power interface Battery
2: PC-Camera supply
5V 1A
Batt-in300mAh
Troubleshooting Under normal operating conditions, such as abnormal products, please refer to the solution: Unable to boot: Check the recorder and car charger connected correctly, if you manually turned on, check the battery level is too low needs recharging As a result of procedural questions by pressing the RESET Reset button to restore to factory settings. When the camera automatically stops recording, or do not cycle the camera: Due to the huge high-definition video data, it is possible because the memory card reader could not keep pace Please use the high-speed TF card, such as C10 high speed card. Not cycle the camera is also possible that gravity sensor opens, the memory card are all locked files causing. Please gravity sensor is closed, and the memory card is formatted. Each time the camera and set the cycle is not the same: Check to see if motion detection function, because the camera motion detection state length of time, depending on the screen there is no movement. Shoot the movie is not clear: Please check whether the stolen camera, finger print. Please clean the lens before shooting the surface, keep the lens clean. Sometimes when the effect of the film shoot bad thing: Camera effects and lighting conditions to shoot a great relationship, such as backlighting, shun the light, the intensity of light, and this will result in different shooting out of the video. Images have streaks interference: This is due to the wrong setting " light frequency" produced under the fluorescent lights, the domestic flat rate "50HZ". When the machine When the machine briefly press the "RESET" the reset button to restore restart.
