Transcript
DATA SHEET Manufacturer:
Hatteland Display AS
Product:
15.0 inch Slim Line Maritime Multi Computer (MMC)
Type:
JH 15T17 MMC-MAx-SORx
Last Revised: Revision#:
27 May 2010 00_4
15.0 inch Maritime Multi Computer Features: Series 1 panel computers offer the ultimate in convenience for systems integrators and boat builders. This is backed up by the inherent qualities of Series 1 displays and the flexibility of the powerful integrated computer. Series 1 panel computers are a single flexible solution, designed only for the marine environment and built to last. The MultiPower (AC and DC power input) ensures that they are compatible with all power systems on all vessels. It will automatically switch to whatever power is connected, making it highly flexible for shipbuilders and system integrators alike. The computer itself is specified to ensure that it is capable of running all marine applications, from chart software to engine monitoring and automation applications. It has power to spare too, so software developers can be sure that Hatteland Display Series 1 panel computers can handle the latest applications being designed for bridge and engine room systems in addition to other, more custom uses. Further, all models and variations are offered with Optical Technology bonding that mitigates screen misting. Brightness is adjustable from 0 to 100%. Note: All specifications are subject to change without prior notice!
FRONT VIEW
BACK VIEW
SIDE VIEW
N I M
I L E
BOTTOM VIEW
PR
Y R A PANEL CUT OUT
TOPVIEW
Dimensions might be shown with or without decimals and indicated as mm [inches]. Tolerance on drawings is +/- 1mm. For accurate measurements, check relevant DWG file.
This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machinereadable form without the prior written consent of Hatteland Display AS. The products may not be copied or duplicated in any way. Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 5276 3700 -
[email protected] - www.hatteland-display.com
1/2
PRODUCT SPECIFICATIONS - JH 15T17 MMC-MAx-SORx Note: All specifications are subject to change without prior notice!
TECHNICAL DESCRIPTION
MECHANICAL DESCRIPTION
TFT Technology: • • • • •
Physical Considerations:
High Quality SHARP TFT Optical Technology® Bonding 15.0 inch viewable image size Color Active Matrix LCD Module a-Si Thin Film Transistor (TFT)
• • • •
User Controls / Interface:
TFT Characteristics: • • • • • • • •
Native Resolution Pixel Pitch (RGB) Response Time Contrast Ratio Light Intensity Viewable Angle Active Display Area Max Colors
361.00 (W) x 289.00 (H) x 87.00 (D) mm 14.21" (W) x 11.38" (H) x 3.43" (D) Weight: 7.8 kg For mounting unit, use torque 5.1 -> 5.2 Newtonmeter (nM) on screws.
: : : : : : : :
API: Internal SCOM interface, COM3 to control internal display features. Please review the following document for a complete set of commands. http://www.hatteland-display.com/pdflink/inb100018-3.php
1024 x 768 0.297 (H) x 0.297 (V) mm 25 ms (typical), “black” to “white” 400:1 (typical) 250 cd/m2 (typical) +/- 85 deg. (typical) (Up/Down/Left/Right) 304.1 (H) x 228.1 (V) mm 16.7 millions
Power Button Reset Button HDD LED Power LED
: Unit is powered on based by settings in BIOS (Wake-On-Lan etc.) when power cable is connected. : Not implemented : Not implemented : Not implemented
Computer Specifications:
Environmental Considerations:
• Installed OS
• Operating
• • • • • • • • • • • •
Storage Processor Installed Memory System Chipset Graphics Chipset BIOS Speaker Buzzer Power Manager Monitoring Resolution Range RGB OUT Resolution
: None or Microsoft® Windows® Embedded Enterprise (XP Professional Eng w/SP2c, 32bit) : 30GB SSD (SATA 2.5”) : See option table below : 2 x 1 GB 667MHz DDR2 Non-ECC CL5 DIMM : Intel® 82945GME : Intel® 945GME Integrated : Award BIOS, supports ACPI : None : Yes, 3500Hz : ACPI : Temperature, voltage and fan monitoring : From 640 x 480 up to 2048 x 1536 @ 85 Hz* : From 640 x 480 up to 1600 x 1200
* Native 1:1 resolution recommended is 1024 x 768 @ 60 Hz. * If resolution is set above 1:1, desktop scrolling mode will be used.
Power Specifications: Power Supply Options: • 115&230VAC - 50/60Hz + 24VDC Note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.
• Storage • IP-Rating
: Temperature -15 deg. C to +55 deg. C Humidity up to 95% : Temperature -20 deg. C to +60 deg. C Humidity up to 95% : IP66
Safety Considerations: Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs.
Input/Output Connectors: • • • • • • • • • •
Ethernet GBLan Keyboard Mouse COM LPT1 USB 2.0 Type A DVI/RGB OUT Compact Flash AC Power DC Power
: : : : : : : : : :
2 x RJ-45 1 x PS/2 1 x PS/2 2 x DB9M (RS-232/422/485 opto-isolated) 1 x DB25F (Bi-directional/ECP/EPP) 4 x USB 1 x 29P DVI-I or as RGB with adapter 1 x CF Socket (Type I/II) Std IEC inlet 1 x 2p D-SUB (male) - Amphenol FCC17
Available Accessories: TBD
Power Consumption: • Operating : 60W (max) : 50W (typ) at max backlight+high CPU (Core2) load
Factory Options:
Processor Options:
• Capacitive Touch screen (-SORC) • Up to 4GB of memory
• CPU #1 - Intel® Core™2 Duo L7400 - 1.5GHz, 4MB Cache, 667MHz FSB • CPU #2 - Intel® Celeron® M ULV 423 - 1.06GHz,1MB Cache, 533MHz FSB
Capabilities / Prepared for:
Note: CPU #1 needs additional fan inside MMC unit.
• 1 x miniPCI (Require modfication of terminal plate)
Example Type Numbers: • • • •
JH JH JH JH
15T17 15T17 15T17 15T17
MMC-MA1-SORA MMC-MA1-SORC MMC-MA2-SORA MMC-MA2-SORC
= = = =
Core2Duo, AC+DC, Optical Bonding Core2Duo, AC+DC, Optical Bonding, Cap. Touch screen Celeron, AC+DC, Optical Bonding Celeron, AC+DC, Optical Bonding, Cap. Touch screen
Compass Safe Distance: JH 15T17 MMC-MAx-SORx
Standard: TBD
APPROVALS
Y R A N I M PRELI Steering: TBD
& CERTIFICATES
This product have been tested / type approved by the following classification societies: IEC 60945 4th (EN 60945:2002) (pending) GL - Germanischer Lloyd (pending) BV - Bureau Veritas (pending)
IACS E10 (pending) ClassNK - Nippon Kaiji Kyokai (pending) DNV - Det Norske Veritas (pending) ABS - American Bureau of Shipping (pending) LRS - Lloyd's Register of Shipping (pending)
2/2
