Preview only show first 10 pages with watermark. For full document please download

Preparing The Srx 210 Services Gateway For Wall

   EMBED

Share

Transcript

Preparing the SRX 210 Services Gateway for Wall-Mount Installation You can mount an SRX 210 services gateway on a wall. The four rubber feet attached to the chassis provide stability. Before mounting an SRX 210 services gateway on a wall: ■ Verify that the site meets the requirements described in Site Preparation Checklist for the SRX 210 Services Gateway. ■ Remove the services gateway chassis from the shipping carton. For unpacking instructions, see Unpacking the SRX 210 Services Gateway. ■ Verify that you have the following parts available in your wall-mounting kit for the SRX 210 services gateway: ■ Wall-mounting brackets ■ Screws NOTE: The wall-mounting kit is not shipped with the device. Related Topics ■ Site Preparation Checklist for the SRX 210 Services Gateway ■ SRX 210 Services Gateway Rack Requirements ■ Clearance Requirements for Airflow and Hardware Maintenance of the SRX 210 Services Gateway ■ Unpacking the SRX 210 Services Gateway ■ Preparing the SRX 210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount Installation ■ Preparing the SRX 210 Services Gateway for Rack-Mount Installation ■ Preparing the SRX 210 Services Gateway for Desk-Mount Installation Preparing the SRX 210 Services Gateway for Wall-Mount Installation ■ 1 2 ■ Preparing the SRX 210 Services Gateway for Wall-Mount Installation