Transcript
SPECIFICATIONS INPUT:
Composite Video Audio AL / AR RCA x 3 S-Video 4Pin-MINDIN x 1 Audio AL / AR RCA x 2 Component Video RCA x 3 Audio AL / AR RCA x 2 RGBHV / VGA 15 - Pin & Stereo Audio 3.5mm mini jack ** VGA is of pass through, hence NO scaling. RS232 9-Pin Female D Connector x 1
OUTPUT:
D-SUB1: D-SUB-15 pin & 3.5mm Mini Audio jack x 1
SELECTABLE OUTPUT RESOLUTION:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1280 x 1024, 1600 x 1200-OSD, 1400 x 900-OSD, 1680 x 1050-OSD
OUTPUT TIMING:
60 Hz
MAX RESOLUTION:
1680 x 1050 @ 60 Hz
CABLE LENGTH (INPUT):
1 to 3 meter
CABLE LENGTH (OUTPUT):
Up to 20 meter (* Depending on the cable rating)
POWER SOURCE:
12V DC 3Amp
MAIN VOLUME:
32 steps digital volume control
DIMENSIONS:
(200 x 115 x 45) mm | Weight : 800 g
HOUSING:
Metal
ACCESSORIES:
AC-DC Power Adaptor 12V-DC, 3A
** For detail and updated RS-232 Command protocol for programming, please visit and download from www.abtussingapore.com
Presentation Scaler Switcher
4:1 Multi Media Presentation Scaler Switcher
* Specifications are subject to changes without notice.
Configuration Diagram:
Model: AVS-SCL402/A
ABtUS SINGAPORE PTE LTD
www.abtussingapore.com
User Operation Guide PRODUCT DESCRIPTION
RS-232 PROTOCOL AND CONTROL CODE
The ABtUS AVS-SCL402/A is a Pro-AV Scaler switcher that takes up to 8 different Video Input formats. It scales any Composite, s-Video (Y/C), component video (YUV) or computer graphics video signal up or down to a selectable graphics output resolution, and provide glitch-free switching between sources through an image capturing memory switching technology.
PRODUCT HIGHLIGHTS · · · · ·
Motion adaptive de-interlacing/interlacing 3D Noise reduction (NTSC/PAL) 3D Comb filter (NTSC/PAL) Film-mode detection 2:2/3:2 pull down Support Remote control
· · · ·
Support RS232 control interface Image capturing memory switching technology Support friendly Windows AP OSD full function control
FRONT PANEL VIEW
1
2
ITEM
3
4
DESCRIPTION
1. POWER
Push Power to trun ON or OFF system
2. INPUT SELECT
Input Signal: (1). CV : Signal input from Composite Video and Audio (2). YC : Signal input from S-Video and Audio (3). YUV : Signal input from Component Video and Audio (4). VGA : Signal input VGA and Audio input Select output resolution Select able range: 640x480, 800, 600, 1024x768, 1280x1024 @60Hz ENTER (1). Enter or leave OSD menu (2). Volume control when not in OSD. When in OSD menu, it is used to changes selected item (3). When in OSD menu, it is used to scroll up or down.
3. OUTPUT SELECT 4. FUNCTION KEY
BACK PANEL VIEW
1 ITEM 1. 2. 3. 4. 5. 02
2
3
DESCRIPTION RS-232 I/O port: for remote controlling VGA/Audio IN VGA/Audio OUT Component Video IN (Y, Cb, Cr) Component Audio IN
4
5 ITEM
6
7
8
DESCRIPTION
6.
Composite Video/Audio IN
7.
S-Video/Audio IN
8.
DC Power IN (Before plugging in the power, please check if the power is : 12 V DC 3Amp) * Specifications are subject to changes without notice.
07
User Operation Guide RS-232 PROTOCOL AND CONTROL CODE 1. Communication Protocol
OSD USER MENU
(2) RS-232 Connection
Baud Rate: 9600 bps Data Length:
8 bits
Parity:
Non parity
Stop bit:
One bit
X on/off:
None
This scalar comes with OSD menu function, it can store the user desired contrast, brightness and other setting. All function in the OSD menu can be change from the front panel control as shown, setting for each function will then be stored accordingly separately. 1. When the unit is under operating mode (Power ON) press "ENTER" on the front panel to open the main menu
ENTER
2. Press" ", " " from the front panel to select the desired item on the OSD menu
3. RS-232 Control Code Control code format are of standard ASCII code. Follow are the detail code and description:
3. Press " "," " from the front panel to change the setting or enter the next OSD 4. Press "ENTER" from the front panel again to go back to the last OSD menu or to leave OSD menu
OSD STRUCTURE
ITEM
1. Contrast
Change picture contrast
06
DESCRIPTION
1
Display the current input source selected
2
Display the current input source format
3
OSD menu options
4
Display the current setting of the selected item
2. Brightness
Change picture brightness.
* Specifications are subject to changes without notice.
03
User Operation Guide 3. Saturation
4. Sharpness
10. Self pattern out
Change picture color, to make it more colorful or faded
Change the picture sharpness
Output a while page for turning of screen. (it is recommended to use this setting when auto adjust doesnt work and there is abnormal with the screen)
5. Noise reduce
6. Hue
11. Information
Reduce the interference. The higher the setting the less interference you will get, but it could cause picture distortion, so it is advices that the user should change the setting to own preference.
Changing picture Hue. Increasing the Hue will make the picture red while decreasing the Hue will make the picture green.
Display current signal input source, input format and out resolution.
7. Setting:
8. Recall color
12. Output Mode
Enter other setting menu
Recall current source Contrast, Brightness, Saturation, Sharpness. Noise reduce and Hue to factory setting
Change and selection of Output resolution setting
9. Blue back ground
13. Exit
14. Volume
When there is no signal input, the back ground setting is blue in color
Leaving the OSD menu
When OSD menu is closed, use the t and u on the front panel to control the volume level
04
* Specifications are subject to changes without notice.
05
