Pretium Edge® Se Solutions

Transcript

A LANscape ® Pretium ® Solutions Product | Pretium EDGE® SE Solutions TEST EQUIPMENT | SPLICE EQUIPMENT Pretium EDGE® Solutions provide a variety of cuttingedge technologies for your data center and storage area network (SAN), with four unique families to meet your network’s unique requirements. For more information on all available Pretium EDGE Solutions, visit www.corning.com/cablesystems/datacenter. Pretium EDGE Solutions | Photo LAN2279 | Photo LAN3205 CABLES Pretium EDGE SE Pigtail Module Solution SPECIFICATION SHEET LAN-1477-AEN | PAGE 1 | PRETERMINATED SYSTEMS | Pretium EDGE SE Splice-On MTP Compatible Connector Solution | Photo LAN3196 | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | • Pretium EDGE SE Splice-On MTP ® Compatible Connector Solution • Pretium EDGE SE Pigtail Module Solution SPLICE CLOSURES | The Pretium EDGE SE Solutions family creates new possibilities for customers who value the cable management and density of Pretium EDGE Solutions but require a field-terminated, fusion-spliced solution. Pretium EDGE SE Solutions offer two unique fusion splicing options: TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product features and benefits | Tailored-length assemblies eliminate slack concerns from incorrectly ordered pre-engineered lengths No splice trays required Reduces space required for splice protection and storage, improves access within the housing Compatible with both Pretium EDGE modules and panels Scale easily to 40G and 100G Ethernet by simply swapping modules for MTP Panels specifications | OS2 LC 0.15 0.5 MTP ® Connector 0.35 0.75 Modules/Harnesses 0.5 1.3 LC Pretium EDGE SE Pigtail Module Solution features and benefits | Tailored-length assemblies eliminate slack concerns from incorrectly ordered pre-engineered lengths Utilizes high-density, easy-access Pretium Better utilization of rack space for higher revenue generation per EDGE Hardware rack unit without sacrificing functionality Eliminates one MTP Connector pair for reduced overall link loss Insertion Loss (dB) Max Connected Mated Pairs LC SPECIFICATION SHEET LAN-1477-AEN | PAGE 2 | specifications | OM3/OM4 OS2 0.15 0.5 PRETERMINATED SYSTEMS Module connectors mate directly to trunk | Eliminates risk of fiber breaks causing installation delays and increased costs | Jacketed ribbon pigtail CABLES Utilizes pigtail module with 3-meter ribbon Allows for resplicing opportunities from incorrect or poor splices CONNECTORS | Field-installable cabling system HARDWARE Connected Mated Pairs | OM3/OM4 | Insertion Loss (dB) Maximum | Flexible cable design options to meet unique network needs CABLE ASSEMBLIES Installable on bare ribbon or jacketed loose fiber cable SPLICE CLOSURES Utilizes high-density, easy-access Pretium Better utilization of rack space for higher revenue generation per EDGE Hardware rack unit without sacrificing functionality TEST EQUIPMENT | Field-installable cabling system SPLICE EQUIPMENT | Pretium EDGE® SE Splice-On MTP® Compatible Connector Solution TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | Pretium EDGE® SE Splice-On MTP® Compatible Connector Solutions TRAINING | Pretium EDGE® SE Solutions Page 5 Page 10 HARDWARE | Page 4 SPLICE CLOSURES | TEST EQUIPMENT | The Pretium EDGE SE Splice-On MTP ® Compatible Connector Solution is ideal for field-terminated data center and SAN solutions where future migration to parallel optics is planned. Bulk cable and MTP Compatible splice-on connectors enable the use of Pretium EDGE modules, harnesses, panels, housings and jumpers. Pretium EDGE Solutions | Drawing MM191 SPECIFICATION SHEET LAN-1477-AEN | PAGE 3 Page 12 | Page 21 PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | Page 7 A LANscape ® Pretium ® Solutions Product Splice-On MTP® Compatible Connector Solution SPLICE EQUIPMENT | Pretium EDGE® Housings TRAINING | Pretium EDGE® SE Solutions EDGE-01U EDGE-01U-SP EDGE-02U EDGE-04U | Photo LAN1693 | Photo LAN2309 HARDWARE | | Photo LAN2245 SPLICE CLOSURES | | Photo LAN2297 specifications and ordering information | Rack Units (RU) Product Dimensions W x D x H (in) Package Dimensions Shipping W x D x H (in) Weight (lb) Module or Fiber Density per Unit Panel Capacity EDGE-01U 1 17 x 21.95 x 1.75 20.3 x 27 x 7.8 16 96 8 EDGE-01U-SP 1 17 x 19.5 x 1.75* 19 x 22.125 x 7.75 11 144 12 EDGE-02U 2 17 x 24.6 x 3.50 22.3 x 27.4 x 8.4 27 288 24 EDGE-04U 4 17 x 24.6 x 7.00 23.3 x 28.6 x 13 34 576 48 SPECIFICATION SHEET LAN-1477-AEN | PAGE 4 | PRETERMINATED SYSTEMS | * When rear strain-relief plate is removed, product depth reduces to 14.9 in. CABLES | Part Number CONNECTORS | CABLE ASSEMBLIES | EDGE-01U •S  liding tray tilts to 30 degrees EDGE-01U-SP • O  pen rear deck allows for easier access for MTP® Connectors • Removable rear strain-relief shelf allows for installation in reduceddepth applications. See hardware accessories for alternate strain-relief options EDGE-02U • Removable back door allows easier access to MTP Connectors on rear of modules EDGE-04U • Industry-leading fiber density while maintaining unparalleled finger access to jumpers TEST EQUIPMENT | Pretium EDGE HD housings are available in 1U, 2U and 4U sizes. Mountable in 19-in racks or cabinets, they provide industry-leading high-density connectivity when combined with Pretium EDGE modules, panels, harnesses, trunks and jumpers. Splice-On MTP® Compatible Connector Solution A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | Modules TRAINING | Pretium EDGE® SE Solutions Pretium EDGE Module with VFL-Compatible Shutters HARDWARE | | Photo LAN1545 SPLICE CLOSURES | TEST EQUIPMENT | The Pretium EDGE® modules provide the interface between the MTP® Connector on the trunk and the LC duplex jumpers that will then connect directly into the electronics. The LC duplex adapters feature hinged VFL-compatible shutters that move up and out of the way when the connector is inserted. Specially designed indents in the shutters ensure that the end faces of the connectors are never touched. These shutters replace the standard dust caps that typically once removed are never replaced, exposing the interior end faces to dust particles and possible damage. |2 - |3 |4 |1 |2 |3 |4 Select polarity. Select LC duplex adapters on front of module. Select PINNED MTP Connector on rear of module. Select fiber type. U = Universal R = Straight through 93 = Multimode 89 = Single-mode SPECIFICATION SHEET LAN-1477-AEN | PAGE 5 | PRETERMINATED SYSTEMS | CABLES | 05 = Multimode (OM3/OM4) 04 = Single-mode (OS2) T = OM3 Q = OM4 G = OS2 CABLE ASSEMBLIES - | |1 M12 CONNECTORS ECM - | ordering information | Splice-On MTP® Compatible Connector Solution A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | MTP ® Adapter Panels TRAINING | Pretium EDGE® SE Solutions MTP Adapter Panel with Four MTP Adapters HARDWARE | | Photo LAN2695 SPLICE CLOSURES | TEST EQUIPMENT | The Pretium EDGE® MTP Panels provide a simple interface to mate MTP Connectors. This occurs when connecting MTP Trunks to MTP Extender Trunks, MTP Trunks to Trunk Harnesses and in 40G multimode networks when MTP Trunks are connected to 40G Jumpers. |1 |2 Select fiber count. Select fiber type. E3 = Multimode (OM3/OM4) 90 = Single-mode (OS2) SPECIFICATION SHEET LAN-1477-AEN | PAGE 6 | PRETERMINATED SYSTEMS | CABLES | 24 = 2 MTP Adapters 48 = 4 MTP Adapters |2 | |1 - CONNECTORS EDGE - CP CABLE ASSEMBLIES | ordering information | A LANscape ® Pretium ® Solutions Product This cable is also available with interlocking armor for special applications requiring additional mechanical durability. MIC Cables are available in 12 different jacket colors, enabling easy visual identification and segregation of cables. Contact your customer care representative for ordering information. specifications | Temperatures Storage: Installation: Operation: Approvals and Listings National Electrical Code® (NEC®) OFNP, CSA FT-6, ICEA S-83-596 Flame Resistance NFPA 262 (for plenum, riser and general building applications) 4.4 (0.17) 20.1 (13.5) 440 (100) 132 (30) 6.6 (2.6) 4.4 (1.7) 2.2 (0.9) 24 9.0 (0.35) 69.3 (46.4) 660 (150) 200 (45) 13.5 (5.3) 9.0 (3.5) 9.0 (3.5) 36 9.0 (0.35) 70.1 (47.1) 660 (150) 200 (45) 13.5 (5.3) 9.0 (3.5) 9.0 (3.5) 48 10.0 (0.40) 88.6 (59.5) 660 (150) 200 (45) 15.0 (5.9) 10.0 (3.9) 10.0 (3.9) 72 12.0 (0.48) 132.0 (88.7) 660 (150) 200 (45) 18.0 (7.1) 12.0 (4.7) 12.0 (4.7) 96 14.2 (0.56) 190.3 (127.9) 660 (150) 200 (45) 21.3 (8.4) 14.2 (5.6) 14.2 (5.6) 144 15.8 (0.62) 214.7 (144.3) 660 (150) 200 (45) 23.7 (9.3) 15.8 (6.2) 15.8 (6.2) | | PRETERMINATED SYSTEMS | SPECIFICATION SHEET LAN-1477-AEN | PAGE 7 CABLES | 12 | Nominal Nominal Cable Weight Maximum Tensile Loads Minimum Bend Radius Fiber Outside Diameter kg/km Short-Term Long-Term Loaded Installed – cm (in) Count mm (in) (lb/1000 ft) N (lbf) N (lbf) cm (in) Single-Mode Multimode CONNECTORS Corning Cable Systems recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation temperature range specifications for best installation results. CABLE ASSEMBLIES | HARDWARE | -40° to +70°C (-40° to +158°F) 0° to +60°C (+32° to +140°F) 0° to +70°C (+32° to +158°F) TEST EQUIPMENT The 12-fiber groupings enable efficient ribbonization and compatibility with the splice-on MTP Compatible connectors. The flexible, flame-retardant jacket and non-preferential bend axis allow easy installation in space-constrained areas and the all-dielectric cable construction requires no grounding or bonding. | Corning Cable Systems MIC 250 Plenum Cables utilize 250 µm color-coded optical fibers, surrounded by dielectric strength members with a flexible, flame-retardant outer jacket. This small-outside-diameter cable is recommended for the Pretium EDGE® SE Splice-On MTP® Solution as the jacketing of the cable provides additional protection for the fibers when used inside Pretium EDGE Housings with sliding trays. SPLICE EQUIPMENT | Trunk Cable | MIC® 250 Plenum Distribution Cable, 12-144 Fibers SPLICE CLOSURES Splice-On MTP® Compatible Connector Solution TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product 50 Multimode Single-Mode* ISO/IEC 11801 Nomenclature OM3† OM4† OS2 Fiber Code T T E Performance Option Code 80 90 31 Wavelength (nm) 850/1300 850/1300 1310/1383/1550 Maximum Attenuation 3.0/1.0 3.0/1.0 0.65/0.65/0.5 (dB/km) 1500/500 3500/500 –/–/– Minimum Effective Modal Bandwidth (EMB) (MHz•km) 2000/ – 4700‡/ – –/–/– Serial 1 Gigabit Ethernet Distance (m) 1000/600 1100/600 5000/ – / – Serial 10 Gigabit Ethernet Distance (m) 300/ – 550/ – 10000/ – /40000 SPECIFICATION SHEET LAN-1477-AEN | PAGE 8 | | PRETERMINATED SYSTEMS | CABLES | Notes: 1) Improved attenuation and bandwidth options available. 2) Bend-insensitive single-mode fibers available on request. 3) Contact a Corning Cable Systems Customer Care Representative for additional information. 4) 50 µm multimode fiber macrobend loss ≤ 0.2 dB at 850 nm for two turns around 7.5 mm radius mandrel. CONNECTORS * ITU 652.D compliant. † Meets 0.75 ns optical skew when used in all Corning Cable Systems Plug & Play™ Systems solutions. ‡ Assumes 1.0 dB maximum total connector/splice loss. CABLE ASSEMBLIES | HARDWARE | Minimum Over Filled Launch (OFL) Bandwidth (MHz•km) | 50 Multimode TEST EQUIPMENT Optical Fiber Type (µm) | transmission performance | SPLICE EQUIPMENT | MIC® 250 Distribution Plenum Cable, 12-144 Fibers SPLICE CLOSURES Splice-On MTP® Compatible Connector Solution TRAINING | Pretium EDGE® SE Solutions Splice-On MTP®Compatible Connector Solution A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | MIC® 250 Distribution Cable, 12-144 Fibers ordering information | Contact Customer Care at 800-743-2671 for other options. | |1 |3 |4 Select fiber count. Select fiber placement. Select performance option code (see Transmission Performance table). Standard offerings: 012 048 144 024 072 036 096 3 = 12-fiber cable T = 24-, 36-, 48-, 72-, 96 and 144-fiber cable, stranded design (12 fibers/subunit) TEST EQUIPMENT |4 | |3 - 2 0 SPLICE CLOSURES |2 13 72-Fiber OFNP MIC Loose Fiber Cable 250 µm Color-Coded Fiber 250 µm Color-Coded Fiber Dielectric Central Member Dielectric Strength Member Ripcord MIC 250 Cable, 72-Fiber | Drawing ZA-3719 SPECIFICATION SHEET LAN-1477-AEN | PAGE 9 ZA-3719 | ZA-3406 PRETERMINATED SYSTEMS | MIC ® 250 Cable, 12-Fiber | Drawing ZA-3406 CABLES | Dielectric Strength Member | Flame-Retardant Outer Jacket CONNECTORS Flame-Retardant Outer Jacket CABLE ASSEMBLIES | Select fiber code (see Transmission Performance12-Fiber table).OFNP MIC Loose Fiber Cable | |2 HARDWARE |1 D8 - TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product | Splice-On MTP® Compatible Connector Solution TRAINING | Pretium EDGE® SE Solutions Description MTP Compatible Connectors SOC-MTPA-3N-SM Splice-On Connector, APC, 3 mm, OS2, non-pinned, green SOC-MTP-3N-OM4 Splice-On Connector, 3 mm, OM3/OM4, non-pinned, aqua Note: Pinned connector options are also available when deploying extender trunks. Accessories FuseLite MTP Compatible Connector Holder, OptiSplice® Ribbon Fusion Splicer SOC-HLD-RBN-12S FuseLite MTP Compatible Connector Holder, Sumitomo T-66 Ribbon Splicer SOC-HLD-CON-12S FuseLite MTP Compatible Connector Holder, Sumitomo T-66 Splicer SOC-MTP-HSG-GN Outer Housing with green slider (Qty 25) SOC-MTP-HSG-YL Outer Housing with yellow slider (Qty 25) SOC-MTP-HSG-OR Outer Housing with orange slider (Qty 25) SOC-MTP-HSG-RD Outer Housing with red slider (Qty 25) SOC-TOOL-JACKET FuseLite Connector Jacketed Cable Installation Tool FOTA-001 Cable Ribbonizer Tool SPECIFICATION SHEET LAN-1477-AEN | PAGE 10 | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | SOC-HLD-CON-MTP | Part Number HARDWARE ordering information | | | Photo LAN2829 CABLE ASSEMBLIES FuseLite Splice-On MTP Compatible Connector SPLICE CLOSURES | TEST EQUIPMENT | SPLICE EQUIPMENT The FuseLite® MTP® Compatible Splice-on Connector pairs with Pretium EDGE® modules and hardware for high-density data center connectivity without preengineered trunk lengths – ideal for applications with conduit limitations or where cable slack management is a concern. Available in single-mode and multimode, the FuseLite MTP Compatible Connector eliminates the need for splice trays and is compatible with leading fusion splicers in the market. The connector comes in two basic designs, for jacketed 2.9-3.3 mm round 12-fiber cordage and for bare ribbon cable. Splice-On MTP® Compatible Connector Solution | A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT Connector Holder Required Fiber Holder Required OptiSplice® Ribbon Splicer SOC-HLD-CON-MTP N/A (Holder included w/ splicer) Sumitomo T-66 Ribbon Splicer SOC-HLD-CON-125 SOC-HLD-RBN-125 SPECIFICATION SHEET LAN-1477-AEN | PAGE 11 | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | | Compatible Splicers TEST EQUIPMENT Splicer Compatibility | Description SPLICE CLOSURES Part Number | ordering information | TRAINING Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product Splice-On MTP® Compatible Connector Solution TRAINING | Pretium EDGE® SE Solutions Pretium EDGE® Module Harness SAN Director Pretium EDGE Solutions Module Harness | Pretium EDGE Solutions Module ZA-3642 |3 Select fiber type. Select fiber type. Select LC leg stagger. 7579 = Multimode (OM3/OM4) 9078 = Single-mode (OS2) T = OM3 Q = OM4 G = OS2 1 2 3 4 = = = = Cisco  MDS 9506, 9509 and 9513 48-port blade B  rocade 48000, DCX and DCX-4S 48-port blade C  isco Nexus 7010 and 7018 32-port blade Uniform length of 6 in |4 Select harness length in feet. 07 = S  hort harness for adjacent mounting of hardware and electronics 10 = M  edium harness for flexible mounting options within cabinet 20 = L  ong harness for adjacent cabinet mounting * Harness length is measured from MTP Connector to furcation plug and therefore does not include LC leg length. * Harnesses can be made in 1-ft increments from 3 to 20 ft. SPECIFICATION SHEET LAN-1477-AEN | PAGE 12 CABLE ASSEMBLIES |2 | |1 |4 F CONNECTORS |3 0 | |2 W CABLES |1 PH - | 12 PRETERMINATED SYSTEMS H | ordering information | | HARDWARE | Pretium EDGE Module Harness | Drawing ZA-3642 SPLICE CLOSURES Non-pinned MTP Connector TEST EQUIPMENT | The Pretium EDGE® Module Harness is designed to create a cross-connect point near the electronics by enabling port replication. This is possible with duplex LC connectors to interface with the electronics and a non-pinned MTP® Connector to connect into the back of a module. With port replication, your installation will look the same even after multiple moves, adds and changes (MACs). This can be used in a horizontal distribution area (HDA), as an example. SPLICE EQUIPMENT | Module Harnesses TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product Splice-On MTP®-Compatible Connector Solution Standard Harness Application The Pretium EDGE® Trunk Harness is designed to facilitate an interconnect point when the electronics are located in a separate area than the cross-connect or patching field. This is possible with duplex LC connectors to interface with the electronics and pinned MTP® Connectors to connect into a trunk. This can be used in an equipment distribution area (EDA), as an example. SPLICE EQUIPMENT | Trunk Harnesses Pretium EDGE Solutions Trunk Cable Pretium EDGE Solutions MTP Panel TEST EQUIPMENT | Pretium EDGE Solutions Module Pinned MTP Connector SAN Director ZA-3643 |3 Select fiber type. Select fiber type. Select LC leg stagger. 9379 = Multimode (OM3/OM4) 8978 = Single-mode (OS2) T = OM3 Q = OM4 G = OS2 1 2 3 4 = = = = Cisco  MDS 9506, 9509 and 9513 48-port blade B  rocade 48000, DCX and DCX-4S 48-port blade C  isco Nexus 7010 and 7018 32-port blade U  niform length of 6-in |4 Select harness length in feet. 07 = S  hort harness for adjacent mounting of hardware and Electronics 10 = M  edium harness for flexible mounting options within cabinet 20 = L  ong harness for adjacent cabinet mounting * Harness length is measured from MTP Connector to furcation plug and therefore does not include LC leg length. * Harnesses can be made in 1-ft increments from 3 to 20 ft. SPECIFICATION SHEET LAN-1477-AEN | PAGE 13 CABLE ASSEMBLIES |2 | |1 |4 F CONNECTORS |3 0 | |2 Z CABLES |1 PH - | 12 PRETERMINATED SYSTEMS H | ordering information | | HARDWARE | Pretium EDGE Trunk Harness | Drawing ZA-3643 SPLICE CLOSURES | Pretium EDGE Solutions Trunk Harness TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product Type 1 40G Jumper | MTP® Jumpers SPLICE EQUIPMENT 40G Switch Pretium EDGE® MTP Jumpers allow for the seamless migration to higher data rates for multimode systems in the data center when used in conjunction with universal trunks. This jumper is based around pinned or non-pinned 12-fiber MTP Connectors. Pictured here are the three most common applications for this type of jumper to make ordering easier. All the jumpers listed have a TIA-568 Type-B polarity and are plenum rated. Non-pinned MTP Connector TEST EQUIPMENT | 40G Switch Non-pinned MTP Connector Type 3 40G Jumper | Type 1 | Drawing ZA-3866 ZA-3866 40G Switch Trunk Trunk Trunk | MTP panel HARDWARE MTP panel Non-pinned MTP Connector MTP panel Pinned MTP Connector Pinned MTP Connector CABLE ASSEMBLIES | Pinned MTP Connector Type 2 | Drawing ZA-3867 Type 3 | Drawing ZA-3868 ordering information | SPLICE CLOSURES Type 2 40G Jumper ZA-3868 |2 Select MTP Connector one. Select MTP Connector two. 75 = Non-pinned OM3/OM4 93 = Pinned OM3/OM4 89 = Non-pinned OS2 90 = Pinned OS2 Use options from item 1 See Note 1. |3 |5 Select fiber type. Select unit of measure. T = OM3 Q = OM4 G = OS2 M = Meters F = Feet |4 Notes: 1) Always list lowest numbered connector first. Select distance. 2) Other polarities available. 001-999 SPECIFICATION SHEET LAN-1477-AEN | PAGE 14 |5 | |1 |4 CABLES |3 | |2 E8 - NB PRETERMINATED SYSTEMS |1 12 | J CONNECTORS | ZA-3867 Page 16 TRAINING | Page 17 Page 20 SPECIFICATION SHEET LAN-1477-AEN | PAGE 15 | PRETERMINATED SYSTEMS | Pretium EDGE Solutions | Drawing MM191 CABLES | Page 21 CONNECTORS | CABLE ASSEMBLIES | HARDWARE | SPLICE CLOSURES | Page 18 TEST EQUIPMENT | When migration to parallel optics is not a concern – for example, when deploying single-mode, Pretium EDGE® SE Solutions offer a pigtail module solution. This solution adds a 3-meter ribbon pigtail to the high-density LC duplex Pretium EDGE module and is used with bulk cable, splice trays and Pretium EDGE Housings (-02U and -04U). | A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT Pretium EDGE® SE Pigtail Module Solution A LANscape ® Pretium ® Solutions Product Pigtail Module Solution | EDGE-02U | Photo LAN2245 EDGE-04U | Photo LAN2309 Package Dimensions Shipping W x D x H (in) Weight (lb) Module or Fiber Density per Unit Module Capacity EDGE-02U 2 17 x 24.6 x 3.50 22.3 x 27.4 x 8.4 27 288 24 EDGE-04U 4 17 x 24.6 x 7.00 23.3 x 28.6 x 13 34 576 48 CONNECTORS Product Dimensions W x D x H (in) | Rack Units (RU) SPECIFICATION SHEET LAN-1477-AEN | PAGE 16 | PRETERMINATED SYSTEMS | Part Number CABLES specifications and ordering information | | CABLE ASSEMBLIES | HARDWARE | SPLICE CLOSURES | EDGE-02U • R  emovable back door allows easier access to MTP® Connectors on rear of modules EDGE-04U • Industry-leading fiber density while maintaining unparalleled finger access to jumpers TEST EQUIPMENT Pretium EDGE HD housings are available in 2U and 4U sizes for the pigtail module solution. Mountable in 19-in racks or cabinets, they provide industry-leading high-density connectivity when combined with Pretium EDGE pigtail modules, trunks and jumpers. SPLICE EQUIPMENT | Pretium EDGE® Housings TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product Pigtail Module Solution SPLICE EQUIPMENT | Pretium EDGE® Pigtail Module TRAINING | Pretium EDGE® SE Solutions Pretium EDGE SE Pigtail Module, OS2 |2 |3 |1 |2 |3 Select polarity. Select LC Connector. Select fiber type. 04 = Single-mode 05 = Multimode K = 62.5 µm multimode (OM1) Q = 50 µm multimode (OM2/OM3/OM4) G = Single-mode (OS2) SPECIFICATION SHEET LAN-1477-AEN | PAGE 17 | PRETERMINATED SYSTEMS | CABLES | U = Universal wiring S = Straight through | - R3M CABLE ASSEMBLIES |1 M12 - | ESM - CONNECTORS ordering information | HARDWARE | | Photo LAN2832 SPLICE CLOSURES | TEST EQUIPMENT | Pretium EDGE SE pigtail modules provide the interface between the trunk cable and the LC duplex jumpers that will then connect directly into the electronics. The module has a 3-meter jacketed ribbon pigtail directly from the modules connectors to the rear of the module, and can be mass fusion spliced directly to ribbon cable. The LC duplex adapters feature hinged VFL-compatible shutters that move up and out of the way when the connector is inserted. Specially designed indents in the shutters ensure that the end faces of the connectors are never touched. These shutters replace the standard dust caps that typically once removed are never replaced, exposing the interior end faces to dust particles and possible damage. A LANscape ® Pretium ® Solutions Product Pigtail Module Solution Ripcords Dielectric Strength Members Tape Buffer Tube SPLICE CLOSURES | Optical Fiber Ribbons | Flame-Retardant Outer Jacket TEST EQUIPMENT Corning Cable Systems Ribbon Plenum Cables are designed for use in plenum, riser and general purpose environments for intrabuilding backbone installations and for high-fiber-count data centers. These cables consist of 12 to 216 fibers organized into 12-fiber ribbons inside a central tube. Precise fiber and ribbon geometries result in excellent mass fusion splicing yields. The cable is available in 62.5 µm, 50 µm and single-mode. SPLICE EQUIPMENT | Trunk Cable | Ribbon Plenum Cables, 12-216 Fibers TRAINING | Pretium EDGE® SE Solutions Ribbon Plenum Cable | Drawing ZA-2566 specifications | Storage: Installation: Operation: -40º to +70ºC (-40º to +158ºF) 0º to +60ºC (+32º to +140ºF) 0º to +70ºC (+32º to +158ºF) Indoor plenum, riser and general building applications Design and Test Criteria ANSI/ICEA S-83-596, NFPA-262 Tape Buffer Tube Optical Fiber Ribbons Corning Cable Systems recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation temperature range specifications for best installation results. Nominal Cable Weight kg/km (lb/1000ft) Nominal Outside Diameter mm (in) Minimum Bend Radius Loaded Installed cm (in) cm (in) 12-96 153 (103) 12.4 (0.49) 18.6 (7.3) 12.4 (4.9) 108-216 220 (148) 15.5 (0.61) 23.3 (9.2) 15.5 (6.1) | PRETERMINATED SYSTEMS | Fiber Count CABLE ASSEMBLIES Common Installation Dielectric Strength Members | National Electrical Code® (NEC®) OFNP, CSA FT-6 Ripcords CONNECTORS Approvals and Listings Flame-Retardant Outer Jacket HARDWARE | 1320 N (300 lbf) 400 N (90 lbf) | Temperatures Short-Term: Long-Term: CABLES Maximum Tensile Loads Flame-Retardant Outer Jacket Ripcords Dielectric Strength Members | SPECIFICATION SHEET LAN-1477-AEN | PAGE 18 Tape A LANscape ® Pretium ® Solutions Product Pigtail Module Solution Performance Option Code 30 31 80 90 01 Wavelength (nm) 850/1300 850/1300 850/1300 850/1300 1310/1383/1550 Maximum Attenuation (dB/km) 3.4/1.0 3.0/1.0 3.0/1.0 3.0/1.0 0.65/0.65/0.5 Minimum Over Filled Launch (OFL) Bandwidth (MHz•km) 200/500 700/500 1500/500 3500/500 –/–/– Minimum Effective Modal Bandwidth (EMB) (MHz•km) 220/ – 950/ – 2000/ – 4700‡/ – –/–/– Serial 1 Gigabit Ethernet Distance (m) 300/550 750/600 1000/600 1100/600 5000/ – / – Serial 10 Gigabit Ethernet Distance (m) 33/ – 150/ – 300/ – 550/ – 10000/ – /40000 * ITU 652.D compliant. † Meets 0.75 ns optical skew when used in all Corning Cable Systems Plug & Play™ Systems solutions. ‡ Assumes 1.0 dB maximum total connector/splice loss. | Notes: 1) Improved attenuation and bandwidth options available. 2) Bend-insensitive single-mode fibers available on request. 3) Contact a Corning Cable Systems Customer Care Representative for additional information. 4) 50 µm multimode fiber macrobend loss ≤ 0.2 dB at 850 nm for two turns around 7.5 mm radius mandrel. | T E TEST EQUIPMENT K T T | Fiber Code OM3† OM4† OS2 SPLICE CLOSURES OM1 | ISO/IEC 11801 Nomenclature OM2 50 Multimode Single-mode* HARDWARE 62.5 50 50 Multimode Multimode Multimode | Optical Fiber Type (µm) CABLE ASSEMBLIES transmission performance | SPLICE EQUIPMENT | Ribbon Plenum Cables, 12-216 Fibers TRAINING | Pretium EDGE® SE Solutions Standard offerings: 012 048 144 024 072 216 036 096 Select fiber code (see Transmission Performance table). SPECIFICATION SHEET LAN-1477-AEN | PAGE 19 | Select performance option code (see Transmission Performance table). CABLES |3 | Select fiber count. |2 |3 PRETERMINATED SYSTEMS |1 |2 -20 | |1 C8-141 CONNECTORS ordering information | A LANscape ® Pretium ® Solutions Product Pigtail Module Solution Accessories SPLICE EQUIPMENT | Splice Closure Fiber (SCF) Tray 48 heat-shrink single-fiber splices or six mass fusion splices Splice Tray Dimensions (L x W x D) in (mm) 12.23 x 3.9 x 0.4 (311 x 100 x 10) ordering information | Description Splice Closure Fiber (SCF) Tray, 48 heat-shrink single-fiber splices or 6 mass fusion splices 2806032-01 Single-fiber Heat-Shrinks (pack of 50, 40-mm long) 2806031-12 Mass Fusion 12-fiber Heat-Shrinks (pack of 25, 40-mm long) SPECIFICATION SHEET LAN-1477-AEN | PAGE 20 | PRETERMINATED SYSTEMS | CABLES | SCF-ST-077 CONNECTORS | Part Number CABLE ASSEMBLIES specifications | | HARDWARE | | Photo LAN1973 SPLICE CLOSURES | TEST EQUIPMENT | Corning Cable Systems Splice Trays use proven designs and fiber organization technology to provide optimum physical protection for fusion and mechanical splicing methods. The trays are engineered for use with both loose tube and tight-buffered optical cable designs. Their generous size prevents induced attenuation due to fiber bending. The SCF splice trays contain organizers for a variety of popular splicing methods. The fusion splice organizer holds and protects the actual splice, thereby eliminating the need for extra parts. Each mechanical splice organizer provides a positive holding action for maximum splice protection during installation and use. TRAINING | Pretium EDGE® SE Solutions A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | Accessories for Splice-On MTP® Compatible Connector and Pigtail Module Solutions Reverse Polarity Uniboot Duplex Jumpers ordering information | for riser-rated jumpers Select connector one type. Select connector two type. 79 = Multimode (OM3/OM4) LC Duplex 78 = Single-mode (OS2) LC Duplex |3 Select fiber type. T = OM3 Q = OM4 G = OS2 | |4 Select length in meters. Example: 001, 002, 003, 004, 005 * Additional lengths and plenumrated jackets are available upon request. SPECIFICATION SHEET LAN-1477-AEN | PAGE 21 | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | 57 = M  ultimode (OM3/OM4) SC Duplex 79 = M  ultimode (OM3/OM4) LC Duplex 78 = S  ingle-mode (OS2) LC Duplex |2 |4 HARDWARE |1 |3 | |2 M CABLE ASSEMBLIES |1 D120 SPLICE CLOSURES Pretium EDGE Reverse Polarity Uniboot Duplex Jumpers | Photo LAN2223 | TEST EQUIPMENT | The Pretium EDGE® Reverse Polarity Uniboot Duplex Jumpers allow for the quick and easy conversion from a TIA-568 A-B polarity to a TIA-568 A-A polarity without exposing the fibers or needing any tools. This uniboot design allows one cable to carry both fibers, reducing the jumper bulk when routing. 02 TRAINING | Pretium EDGE® SE Solutions | A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT Accessories for Splice-On MTP® Compatible Connector and Pigtail Module Solutions TRAINING | Pretium EDGE® SE Solutions Reverse Polarity Duplex LC Clips |1 Select color. U |1 SPECIFICATION SHEET LAN-1477-AEN | PAGE 22 | | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | N = Blue R = Red E = Orange B = Black G = Green Y = Yellow K = Beige R = Rose C = Slate A = Aqua - SPLICE CLOSURES BP | - HARDWARE Trigger | ordering information | (must order in multiples of 100) CABLE ASSEMBLIES Pretium EDGE Reverse Polarity Uniboot LC Duplex Connectors | Photo LAN2254 TEST EQUIPMENT | All Pretium EDGE® Reverse Polarity Uniboot LC Duplex Connectors come with a clip that is removable. Corning Cable Systems offers a total of ten colors to allow for easy link identification or fabric segmentation. ordering information | Description For MTP Splice-On Option Only - FuseLite MTP Compatible Connector Holder for the OptiSplice Ribbon Fusion Splicer (splicer comes with required field fiber holder) | SOC-HLD-CON-MTP CABLE ASSEMBLIES OptiSplice Ribbon Hand-held Fusion Splicer with cleaver, thermal stripper, one set of 12-fiber handlers, fast heat-shrink oven, carrying case, one Li-Ion battery, external battery charger, AC power supply with US cord, operator’s manual (English), detachable splice tray holder/screen cover and 1-year limited warranty SPECIFICATION SHEET LAN-1477-AEN | PAGE 23 | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | OSR-0SM-T-H HARDWARE | Part Number | | Photo SEH155 SPLICE CLOSURES OptiSplice Ribbon Fusion Splicer TEST EQUIPMENT | OptiSplice® Ribbon Hand-held Fusion Splicer Corning Cable Systems OptiSplice Ribbon Hand-held Fusion Splicer is a sturdy and reliable high-performance splicer for restoration and installation of ribbon cable with 2-, 4-, 6-, 8- or 12-fiber ribbons or single fibers. It features a graphical user interface (GUI) for easy menu navigation and dual cameras that allow for a splice loss estimate of the completed splice. | A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT Accessories for Splice-On MTP® Compatible Connector and Pigtail Module Solutions TRAINING | Pretium EDGE® SE Solutions | A LANscape ® Pretium ® Solutions Product SPLICE EQUIPMENT | OptiSplice® One Single-Fiber Fusion Splicer TEST EQUIPMENT | Corning Cable Systems OptiSplice One Hand-held Fusion Splicer is a durable, reliable and affordable splicer for restoration and installation of enterprise networks with single fibers. This innovative tool features an intuitive user interface for easy menu navigation and dual cameras provide a clear view of the fibers, allowing for a splice loss estimate of the completed splice. OptiSplice One Hand-held Fusion Splicer with cleaver, one set of 250 µm handlers, one set of 900 µm handlers, fast heat-shrink oven, carrying case, one Li-Ion battery, external battery charger, AC power supply with US cord, operator’s manual (English), detachable splice tray holder/screen cover and 1-year limited warranty SPECIFICATION SHEET LAN-1477-AEN | PAGE 24 | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | OS1-0SM-T-H Description HARDWARE ordering information | | SPLICE CLOSURES OptiSplice One Fusion Splicer | Photo LAN-1287 Part Number TRAINING Pigtail Module Solution Accessories | Pretium EDGE® SE Solutions Accessories Part Number Description Housing Accessories Bracket for mounting 1U Pretium EDGE® Housings into 23-in racks PC2-BKT-23 Bracket for mounting 2U Pretium EDGE Housings into 23-in racks PC4-BKT-23 Bracket for mounting 4U Pretium EDGE Housings into 23-in racks EDGE-01U-FLSH-BKT Bracket for mounting a 96- or 144-fiber 1U housing flush to the front rail of a cabinet. Useful in server cabinets with no room between front mounting rail and door. EDGE-BKT-WT-2RU 19-in Bracket that attaches to a wire tray that holds 2U worth of housings EDGE-BKT-WT-4RU 19-in Bracket that attaches to a wire tray that holds 4U worth of housings EDGE-BKT-LR-2RU 19-in Bracket that attaches to a ladder rack that holds 2U worth of housings EDGE-BKT-LR-4RU 19-in Bracket that attaches to a ladder rack that holds 4U worth of housings SPECIFICATION SHEET LAN-1477-AEN | PAGE 25 | TRAINING | | PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | SPLICE CLOSURES | PC1-BKT-23 SPLICE EQUIPMENT ordering information | A LANscape ® Pretium ® Solutions Product | Pretium EDGE Housing Accessories TEST EQUIPMENT Pretium EDGE® SE Solutions Pretium EDGE® SE Solutions Pretium EDGE Trunk Accessories ordering information | Accessories Part Number Description Cleaning Accessories CLEANER-PORT-LC LC Connector and Port Cleaning Tool 2104466-01 MTP® Connector and Port Cleaning Tool SPECIFICATION SHEET LAN-1477-AEN | PAGE 26 A LANscape ® Pretium ® Solutions Product PRETERMINATED SYSTEMS SYSTEMS PRETERMINATED || CABLES CABLES || CONNECTORS CONNECTORS || CABLE ASSEMBLIES ASSEMBLIES CABLE || HARDWARE HARDWARE || SPLICE CLOSURES CLOSURES SPLICE || TEST EQUIPMENT EQUIPMENT TEST || SPLICE EQUIPMENT EQUIPMENT SPLICE || Notes | SPECIFICATION SHEET LAN-1477-AEN | PAGE 27 TRAINING TRAINING A LANscape ® Pretium ® Solutions Product || || Pretium EDGE® SE Solutions | Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. FuseLite, LANscape, MIC, OptiSplice, Pretium and Pretium EDGE are registered trademarks of Corning Cable Systems Brands, Inc. Plug & Play is a trademark of Corning Cable Systems Brands, Inc. MTP is a registered trademark of USConec, Ltd. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2010, 2013 Corning Cable Systems. All rights reserved. Published in the USA. LAN-1477-AEN / January 2013 SPECIFICATION SHEET LAN-1477-AEN | PAGE 28 | Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems PRETERMINATED SYSTEMS | CABLES | CONNECTORS | CABLE ASSEMBLIES | HARDWARE | SPLICE CLOSURES | TEST EQUIPMENT | SPLICE EQUIPMENT | Notes | A LANscape ® Pretium ® Solutions Product TRAINING Pretium EDGE® SE Solutions