Transcript
Pretium EDGE® Tap Module Solution
Multimode Fibre Channel Sample Bills of Material The Pretium EDGE® Solutions family, including the Pretium EDGE Tap Module, is designed to offer infinite possibilities to meet your data center and storage area network needs. Below are just a few design ideas. Contact our highly trained system engineers at 1-800-743-2671 if you need further design assistance.
Link Design Option 1
Six OM4 links with a 70/30 Live/Tap Split Main Distribution Area (MDA) Connectivity
Tap Area
Structured Cabling Area
Connectivity
Jumper
Pretium EDGE Tap Module
Pretium EDGE Trunk
Jumper
PULL
Tap Harness
EDA
MDA
Monitor Device
Electronics
PULL
Electronics
EDA
Pretium EDGE Module
Description
Part Number
Quantity
Pretium EDGE Tap Module, OM4 fiber, 70/30 split ratio (live/tap), LC adapters, 2 pinned MTP® adapters (one live, one tap)
ETM-7B-Q
1
Tap Harness, OM4 fiber, non-pinned MTP Connector to 12 duplex LCs, xx meters (maximum of 5 meters)
H750512QE8-LW00xM
1
Reverse Polarity Uniboot Jumpers, OM4 fiber, LC connectors, xxx meters
797902QD120xxxM
6
Pretium EDGE Housing (01U, 02U or 04U) – if not already installed (not shown)
EDGE-01U (EDGE-02U, EDGE-04U)
1
Pretium EDGE Trunk, OM4 fiber, non-pinned MTP Connectors, xxx feet
G757512QPNDDUxxxF
1
Pretium EDGE Module, OM4 fiber, LC adapters, pinned MTP adapter
ECM-UM12-05-93Q
1
Reverse Polarity Uniboot Jumpers, OM4 fiber, LC connectors, xxx meters
797902QD120xxxM
6
Pretium EDGE Housing (01U, 02U or 04U) – if not already installed (not shown)
EDGE-01U (EDGE-01U-SP, EDGE-02U, EDGE-04U)
1
PRETIUM EDGE TAP MODULE SOLUTION SAMPLE MULTIMODE FIBRE CHANNELS BILLS OF MATERIAL LAN-1528-AEN | PAGE 1
Link Design Option 2
Six OM4 links with a 70/30 Live/Tap Split, Using Tap Module as Cross-Connect Main Distribution Area (MDA)
Connectivity Jumper
Tap Area
Pretium EDGE® Tap Module
Structured Cabling Area
Jumper
Connectivity
Electronics
Pretium EDGE Trunk Pretium EDGE Module
Pretium EDGE Module
PULL
Tap Harness
Connectivity
Cross Connect
Jumper
PULL
Electronics
EDA
Monitor Device
MDA
Description
Quantity
ETM-7B-Q
1
Tap Harness, OM4 fiber, non-pinned MTP Connector to 12 LCs, xx meters (maximum of 5) Pretium EDGE Module Harness, OM4 fiber, non-pinned MTP Connector to Uniboot LCs, "y" designates electronics, xx feet
H750512QE8-LW00xM H937912QPH-yW0xx
1
Reverse Polarity Uniboot Jumpers, OM4 fiber, LC connectors, xxx meters
797902QD120xxxM
6
Pretium EDGE Module, OM4 fiber, LC adapters, pinned MTP adapter
ECM-UM12-05-93Q
1
Pretium EDGE Housing (01U, 02U or 04U) – if not already installed (not shown) Pretium EDGE Trunk, OM4 fiber, non-pinned MTP Connectors, xxx feet Pretium EDGE Module, OM4 fiber, LC adapters, pinned MTP adapter
Reverse Polarity Uniboot Jumpers, OM4 fiber, LC connectors, xxx meters
EDA
Part Number
Pretium EDGE® Tap Module, OM4 fiber, 70/30 split ratio (live/tap), LC adapters, 2 pinned MTP® adapters (one live, one tap)
Pretium EDGE Housing (01U, 02U or 04U) – if not already installed (not shown)
EDGE-01U (EDGE-02U, EDGE-04U) G757512QPNDDUxxxF ECM-UM12-05-93Q
797902QD120xxxM
EDGE-01U (EDGE-01U-SP, EDGE-02U, EDGE-04U)
Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA 800-743-2675 • FAX: 828-325-5060 International: +1-828-901-5000 • www.corning.com/cablesystems
1
1
1
1
6 1
Corning Cable Systems reserves the right to improve, enhance and modify the features and specifications of Corning Cable Systems products without prior notification. Pretium EDGE is a registered trademark of Corning Cable Systems Brands, Inc. MTP is a registered trademark of USConec, Ltd. All other trademarks are the properties of their respective owners. Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved. Published in the USA. LAN-1528-AEN / October 2012
PRETIUM EDGE TAP MODULE SOLUTION SAMPLE MULTIMODE FIBRE CHANNELS BILLS OF MATERIAL LAN-1528-AEN | PAGE 2
