Transcript
Complete range General information Selling prices for specialist dealers.Valid from 1 January 2015. Nonbinding recommended unit sales prices. Excluding Value Added Tax. Subject to technical change without prior notice. Wilkhahn is certified according to Quality Management System DIN EN ISO 9001, Environmental Management System DIN EN ISO 14001 FF. We reserve the right to deviate from illustrations or descriptions of models. Complaints, which prove to be based on changes due to product improvements or technical progress, cannot be accepted. In addition to standard versions of table ranges, customized options are also available. Forms, dimensions, surface finishes and prices on request. Add-on elements: the “left” or “right” sides are always as seen by the person seated. Finishes Veneered table tops and wooden frames of seating ranges are protected with low-solvent, water-based lacquer. Coloured metal surfaces are powder-coated, free from heavy metal. Upholstery All types of upholstery foam used are manufactured CFC-free. Key to symbols ¡ Seat height ¶ Overall height ¢ Width | Depth Veneer direction Concealed lipping Visible lipping The height of the seat has been determined under load conditions using DIN testing equipment. Overall height, width and depth conform to the minimum dimension requirements.
D-133-00055
Important information / typical product characteristics Shine Shine refers to impressions on the cover which can occur due to pressure, body heat and moisture. The form in which it manifests itself depends on the model, cover and upholstery technique and it is one of the characteristics of the design concerned. Therefore it is not a sign of poor quality.
Price List 2015
Leather production Leather is a natural product. Each leather hide is unique. Insect bites, chafed areas or scars are part of the hide’s history. They indicate the natural aspect and high quality of the material and are therefore not recognised as a justified cause for complaint. Wood Wood is a natural product. In our product ranges, we only use very carefully selected, high-quality wood and genuine-wood veneers. Typical characteristics like knots are signs of natural growth. Because each tree trunk is a one-off, differences in the pattern and colour are possible. The unique surface characteristics of wood are down to nature and therefore not considered reasons for complaints. Indoor and outdoor furniture The models are suitable for outdoors. Nevertheless, we recommend not overexposing this furniture to the effects of sun, rain, dust and wind and to keep it in a dry and well-aired place when not using. Differences in colour / structure The combination of different materials, such as chrome plating, or varnishing aluminium, steel or plastic can lead to differences in the colour and structure when the surfaces are compared. These differences do not constitute grounds for complaint.
Upholstery material 35 / Fiberflex 100% Polyester 510 g/lin. m, width 160 cm (63") Abrasion: 70,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E EN 1021-1 when covering CMHR-foam density min. 35 kg/m³ EN 1021-2 when covering CMHR-foam density min. 50 kg/m³ periodical vacuum cleaning, professional cleaning with dry foam 47 / Nova 100% Polyester 560 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, DIN EN ISO12947-2 (Martindale) Light fastness: 5-7, DIN EN ISO 105-B02 Method 2 Pilling: 5, DIN EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 4-5, DIN EN ISO 105‑X12 Flame resistance: CAL 117 E EN 1021-1 when covering CMHR-foam density min. 22 kg/m³ EN 1021-2 when covering CMHR-foam density min. 36 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: 54 / Pitch 100% Trevira CS 470 g/lin. m, width 140 cm (55") Abrasion: 100,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E DIN 4102-1 B1 NF P 92-503-507 M1 ÖNORM A 3800-1 B1/Q1/TR1 BS 5852 when covering CMHR-foam EN 1021-1/-2 when covering PUR-foam density min. 30 kg/m³ UNI VF 9175 1IM when covering CMHRfoam Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers:
60 / Blend 100% wool 600 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 3-4, BS EN ISO 12945-2 Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12 Flame resistance: CAL 117 E BS 5852 when covering FR-foam BS 7176 low hazard when covering CMHR-foam density min. 35 kg/m³ BS 7176 medium hazard when covering CMHR-foam density min. 35 kg/m³ EN 1021-1/-2 when covering CMHRfoam density min. 35 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers:
66 / Lona 85% wool, 15% polyamide 520 g/lin. m, width 140 cm (55") Abrasion: 150,000 rubs, DIN EN ISO 12947-2 (Martindale) Light fastness: 5-7, DIN EN ISO 105-B02 Method 2 Pilling: 4, DIN EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 4-5, DIN EN ISO 105-X12 Flame resistance: CAL 117 E ÖNORM A 3800-1 Q1 ÖNORM B 3852 flame retardant when covering PUR-foam B2 BS 7176 medium hazard when covering CMHR-foam density min. 35 kg/m³ EN 1021-1/-2 when covering PUR-foam density min. 22 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers:
62 / Bond 100% Trevira CS 480 g/lin. m, width 140 cm (55") yarn dyed Abrasion: 100,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 4-5, EN ISO 105-X12 Flame resistance: CAL 117 E DIN 4102-1 B1 NF P 92501-7 M1 ÖNORM A 3800-1 B1/Q1/2 BS 5852 when covering CMHR-foam EN 1021-1/-2 when covering PUR-foam density min. 30 kg/m³ UNI VF 9175 1IM when covering CMHRfoam periodical vacuum cleaning, professional cleaning with dry foam
67 / Miro 65% new wool, 31% hemp, 4% polyamide 610 g/lin. m, width 140 cm (55") yarn dyed Abrasion: 60,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-7, BS EN ISO 105-B02 Method 2 Pilling: 4, BS EN ISO 12945-2 Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12 Flame resistance: CAL 117 E EN 1021-1/-2 when covering PUR-foam density min. 22 kg/m³ periodical vacuum cleaning, professional cleaning with dry foam
63 / Auris 100% wool 520 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 5, BS EN ISO 12945-2 Fastness to rubbing: Dry 4, wet 4, EN ISO 105-X12 Flame resistance: CAL 117 E BS 5852 when covering CMHR-foam 35 kg/m³ EN 1021-1/-2 when covering CMHRfoam density min. 35 kg/m³ UNI 9175/FA1 IM when covering FRfoam density min. 35 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers:
74 / Leather Furniture-quality cowhide with tolerances regarding colour and structure, compliant with DGM, RAL GZ 430 Test results Light fastness: 6-7, DIN EN ISO 105-B02 Method 2 Flame resistance: California TB 117 E BS 5852-3 when covering PUR-foam density min. 22 kg/m³ EN 1021-1/-2 when covering PUR-foam density min. 22 kg/m³ Cleaning Remove dirt or stains with a damp, absorbent cloth and immediately rub over the surface with a dry woollen cloth. 87 / Leather Finest, pure aniline dyed cowhide that exhibits some natural characteristics or may develop patina over time. Light fastness: >3 based on DIN EN ISO 105-B02 Flame resistance: DIN 75200 and DIN EN 1021 parts 1 + 2, CE 117 E Remove dirt or stains with a damp, absorbent cloth and immediately rub over the surface with a dry woollen cloth.
69 / Granit 50% wool, 50% cotton 750 g/lin. m, width 138 cm (54") yarn dyed Fastness to rubbing: approx. 45,000 rubs, DIN EN ISO 12947-2 (Martindale) Light fastness: 5-6, DIN EN ISO 105-B02 Method 2 Pilling: 4-5, DIN EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 4, DIN EN ISO 105-X12 Flame resistance: CAL 117 E DIN 66084 P-c when covering PURfoam B3 density min. 22 kg/m³ EN 1021-1/-2 when covering PUR-foam B3 density min. 22 kg/m³ Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers:
Wilkhahn does not offer any guarantee for those fabrics and leather supplied that are from manufacturers with whom Wilkhahn does not have a supply agreement. A sample of upholstery materials (minimum size A 4) must be supplied in advance to allow them to be checked with regard to workability.
C1 100% cotton 600 g/lin. m, width 140 cm (55") Abrasion: 50,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 5-6, BS EN ISO 105-B02 Method 2 Pilling: 4-5, BS EN ISO 12945-2 Fastness to rubbing: Dry 3, wet 2, EN ISO 105-X12 Fixed covers: periodical vacuum cleaning, professional cleaning with dry foam Removable covers: C2 24% Polyester, 22% flax/linen, 20% viscose, 20% polyacrylic, 8% wool, 6% cotton 720 g/lin. m, width 132 cm (52") Abrasion: min. 35,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 4-5, BS EN ISO 105-B02 Method 2 Pilling: 4, BS EN ISO 12945-2 Fastness to rubbing: Dry 4, wet 3/4, EN ISO 105-X12 Periodical vacuum cleaning, professional cleaning with dry foam C3 65% wool, 20% polyamide, 15% alpaca588 g/lin. m, width 140 cm (55") yarn dyed Abrasion: 100,000 rubs, BS EN ISO 12947-2 (Martindale) Light fastness: 4-5, BS EN ISO 105-B02 Method 2 Pilling: 4, BS EN ISO 12945-2 Fastness to rubbing: Dry 4-5, wet 3/4, EN ISO 105-X12 Fixed covers: Periodical vacuum cleaning, professional cleaning with dry foam Removable covers:
Price List 2015
Contents by range 170 range – ON®
9
180 range – Neos
17
20 range – Stitz 2
20 21
21 range – FS-Line
26
21 range – FS Management
230 range – Aline
NEW
240 range – Sito
28
36
249 range – Cura
39
26 range – Modus Basic
41
27 range – Modus Compact
43
28 range – Modus Medium
47
51
28 range – Modus Executive
290 – Sola
NEW
55
3
30 – Graph
57
300 range – Graph
340 range – Chassis
59
65
361 range – Ceno
67
440 range – Confair
69
540 range tables – Contas
81
544 range – Concentra
84
600 – Conversa
87
610 range tables – Timetable
90
620 range tables – Logon
4
100
632 range tables
122
170 ON 180 Neos 20 Stitz 2
124
640 range tables – Palette
21 FS-Line 21 FS Management 230 Aline
131
660 range – Travis
240 Sito 249 Cura 26 Modus Basic odus 27 M Compact
661 range – Travis height-adjustable
135
odus 28 M Medium odus 28 M Executive 290 Sola 30 Graph 300 Graph
137
830 range – Cubis
340 Chassis 361 Ceno
440 Confair
140
850 range – Velas
540 Contas 544 Concentra
600 Conversa
142
860 range – Asienta
610 Timetable 620 Logon 632
146
890 range – Cana
640 Palette 660 Travis height661 Travis adjustable 830 Cubis
147
Quickship programme
850 Velas 860 Asienta
890 Cana Quickship programme
5
Environmental information
Sustainability policy UN Global Compact Wilkhahn joined the United Nations Global Compact initiative in 2007. The company commits itself to the ten principles of Global Compact regarding the protection of international human rights, adherence to labour standards and rights for employees, the protection of the environment and anti-corruption, all of which are specified as binding corporate policy. Wilkhahn & sustainability In over 100 years of its corporate history, Wilkhahn can look back on a sustainability philosophy that has grown over decades. Terms such as durability, social fairness, environmental responsibility and cultural orientation have developed into guiding corporate principles since the 1950s. Wilkhahn today is regarded internationally as a model of excellence, not only on account of its products but also because of its modern corporate philosophy. This is because the company realised early on that sustainable design should embrace environmental aspects, improve social relationships and define the cultural role of a company. This approach to the way we do business creates a bond between us and our customers throughout the world. There is surely no more rewarding task than working together for a successful future that is worth living in. Corporate principles Honest product design We strive to develop durable products, increase their utility value and reduce waste. “Less is more” or “reduce to the max” are principles that Wilkhahn constantly reinterprets for the future. Ecologically driven design principles are a natural, integral part of product development at Wilkhahn.
6
A spirit of fairness Wilkhahn applies a spirit of fairness towards its employees, partners and customers. This means providing first-class analyses, information, advice, management and support. In the company itself we embrace a cooperative management style which sees employee representatives as co-managers who help shape the company. Fairness and continual improvement in working conditions also apply to the supply chains. To achieve these aims Wilkhahn has signed an international agreement on fostering employee rights. Ecological responsibility Wilkhahn supports sustainable development. Wilkhahn corporate culture is shaped by the balance that we strive to strike between economic, ecological, social and cultural objectives for safeguarding the independence of the company. Adherence to environmentally relevant criteria throughout the entire product life cycle forms the basis of the way in which we judge our success. Employees as partners Top performance requires a potential-driven style to the way we organise our company, with flexible working hours, a bonus scheme, and group and project work. In turn, all employees share in corporate success in material terms. They enjoy a comprehensive pension plan and an employee-focused health programme. And thanks to pioneering measures regarding the architecture of their surroundings, they work in an environment that reconciles social, ecological, economic and aesthetic requirements.
ISO 9001:2008 quality management system In order to safeguard and continually optimize the high quality of products and processes, a comprehensive quality management system was set up as early as 1996. Since then it has been certified for compliance with the ISO 9001 Quality Management Standard of the International Standardization Organization. Quality management is all about customer focus, management responsibility, the participation of all employees involved, ensuring and improving process safety, transparent decision-making structures and supplier relations.
ISO 14001:2009 environmental management system In addition, Wilkhahn is certified in accordance with ISO 14001. This is the international Environmental Management Standard which sets out internationally recognised specifications for an environmental management system, such as reducing ecological footprints and evaluating environmental data and environmental performance.
EMAS EMAS is the acronym for EcoManagement and Audit Scheme, developed by the European Union. As a combined environmental management and auditing system, its purpose is to verify companies are improving their environmental performance. Wilkhahn became one of the first companies in Lower Saxony to achieve certified compliance with the current version EMAS III. In the environmental declaration, confirmed by annual audits, Wilkhahn gives a public account of the company’s environmental performance. For detailed and up-to-date information on Wilkhahn’s socio-ecological approach, go to www. wilkhahn.com in the “Green” section.
D-133-00055
FSC The Forest Stewardship Council® (FSC) quality label indicates compliance with stringent socio-economic requirements in terms of forest management and trading wood products. Wilkhahn’s Bad Münder headquarters meet the criteria of the Forest Stewardship Council (FSC) and are entitled to process and sell FSC®-certified products (licence code C118389, certificate no. TUEV-COC-000462).
Product certification Wilkhahn office ranges are not only certified according to international testing and inspection standards regarding product safety and functional integrity. They also meet all key international reference systems for highly health-compatible and environmentally friendly products. GREENGUARD™ Virtually all Wilkhahn ranges undergo GREENGUARD testing and certification. The Greenguard Environmental Institute is an independent institution in the US that certifies products with regard to their suitability for interiors. Besides environmental aspects, special focus is placed on ensuring that products do not emit any pollutants that might be harmful to health.
LEED Leadership in Energy and Environmental Design (LEED) is a rating system used by the US Green Building Council to evaluate the environmental and social compatibility of buildings. LEED certification awards extra credit points if Wilkhahn office chair and table ranges are used.
Green Star Green Star is an extensive, voluntary rating system developed by the Australian Green Building Council. The system assesses how ecological a building’s design is. The system uses various categories to rate any potential ecological impact resulting from a location chosen for a project, the way the project is carried out, managed or its design. Environmental Product Information sheets, as well as classifications regarding LEED and Green Star, are listed under the product ranges concerned and can be downloaded at www.wilkhahn.com.
Responsibility from the very start In the design and development process, ecological impact is also taken into consideration in addition to design, functional and businessrelated aspects. Because these factors play a pivotal role in the materials chosen, manufacturing processes, options regarding assembly, logistics and transport and how easy products are to repair or recycle. This overview shows the key aspects for the entire product life cycle that currently apply at Wilkhahn. Materials The materials used are subject to stringent controls. Prohibited chemicals are not used in our products at all. All feedstock is listed in a register of hazardous substances. This helps to minimise the use of or substitute any potentially harmful materials. With the goal being to achieve maximum durability and quality, some recycled materials are used in the production of Wilkhahn ranges. This applies in particular to metals like steel and aluminium. Production Efficient use of water, waste management and sustainable energy production Water is becoming an increasingly important resource. Wilkhahn does its utmost to minimise water consumption in all areas. By treating process water, recycling and using state-of-the-art varnishing machinery, no waste water is produced that requires monitoring. The Wilkhahn waste management concept includes sorting waste according to type, as well as recycling and disposing of all waste fractions resulting from production and management. One of the environmental management system’s most important goals is to cut energy consumption continually. A combined heat and power plant and connection to a biogas plant at the Bad Münder site have more than doubled energy efficiency. As a result, heating at the headquarters and production facilities is CO2 neutral.
Wilkhahn production sites Wilkhahn products are manufactured and assembled in Bad Münder (Germany), Castellón (Spain) and Sydney (Australia). The branch facilities and the international subsidiaries are not only subject to quality management requirements, but also to guidelines for the socio-ecological focus of corporate policy which apply through the entire company. Product use Aesthetics and design Products are sustainable if they serve a purpose. The timeless design of the Wilkhahn ranges also means they are useful, intuitive to operate and the materials are durable.. A standard that is reflected by every single detail. The Wilkhahn design approach therefore results in an increase in the utility value of a product that is meant to last. Durability and guarantee The ranges set standards for product design that is sustainable in the best possible sense of the word. The durability of the high quality materials and the traditional, understated design guarantee the chair will last for decades. Our manufacturer’s guarantee is valid for two years, so that customers can reliably plan ahead. An issue we feel responsible for, regardless of the fact that our products last a long time anyway. We consider guarantees way beyond these periods as selling the future short. Our services to extend the ecological life of the chair include maintenance as well as an overhaul of older chairs. Wilkhahn will repair any furniture that has been discontinued for two years after production has been halted.
End of the product life-cycle Return of used products and recycling When customers have stopped using our products, we still take our responsibility seriously and offer extensive services for taking back and recycling used products. We guarantee that used products may be returned in their entirety. They are disassembled at our plant, all components are sorted according to type and – if possible – are recycled. All materials are clearly marked, non-toxic and easy to disassemble. As a result, we can ensure that our product components are returned to local material and production cycles and are properly recycled and disposed of if necessary. Disassembly and recycling Most components in the Wilkhahn ranges permit non-destructive disassembly. In order to guarantee materials are sorted according to type, all components over 150 g in weight are labelled. No agents to protect materials, or organic halogen compounds are used that prevent recycling at a later date.
Air quality and emissions of harmful substances All products undergo certification in the US for compliance with the GREENGUARD Indoor Air Quality™ standard. GREENGUARD™ certifies low-emission products.
7
170 range ON ® Design: wiege
Technical details Function Task chairs with Trimension®, synchronous, three-dimensional kinematics that encourage threedimensional dynamic sitting. The coordinated interaction of the technology, seat and back automatically adapts to the user – whatever the posture or motion involved. The supporting counterpressure is quickly and infinitely adjustable in any direction (a max. of 4.5 rotations) for people weighing between 45 – 120 kg. Backrest height adjustable by up to 60 mm (2⅜") in six lockable positions. Backrest and seat can be locked in the front sitting position. The seat height is infinitely adjustable between 400 mm (15¾") and 520 mm (20½") with a DIN 4550-compliant gas lift. All models optionally available with seat depth adjustment of 400 – 450 mm (15¾" – 17¾"). Conference and visitor chairs with Trimension, on request with pivotable column not height adjustable, alternatively as four-legged type or cantilever chair, optionally stackable.
Frame Task chairs Five-star base, optionally with black, through-dyed plastic, or diecast aluminium, coated (black or silver satin finish), polished or bright chrome plated. Load-dependent braking, twin wheel swivel castors made of black polyamide in accordance with DIN EN 12529 as standard types for carpets; with grey soft polyurethane facing for hard floors. Optional antistatic castors. Shell for the technology made of die-cast shot blasted aluminium, optionally coated in black or silver satin finish, with top cover made of black or through-dyed polypropylene. Gas lift covered by telescopic protective tubing made of black throughdyed polypropylene.
Backrest
Visitor / conference chairs Four-star, die-cast aluminium base, coated (black or silver satin finish), polished or bright chrome plated. Black, multi-purpose plastic glides for all types of flooring. Swing plates made of die-cast aluminium, coated (black or silver satin finish), polished or bright chrome plated. Shell for the technology made of die-cast, shot-blasted aluminium, optionally coated in black or silver satin finish, with top cover made of black, through-dyed polypropy lene. Gas lift covered by telescopic protective tubing made of black through-dyed polypropylene. Cantilever chairs Frame made of bright, chrome plated steel tube, 22 mm (⅞") in diameter, with anti-tilt stoppers made of black polyamide in the standard version for carpets, optionally with hard polyamide glides for soft floors, soft polyurethane glides for hard floors, or polyamide glides with additional felt insert (e. g. for wooden or stone floors susceptible to scratches). Small plastic parts black through-dyed.
Four-legged visitor chairs Frame made of bright chrome plated steel tube, legs 22 mm (⅞") in diameter. Multipurpose POM glides (polyoxymethylene) in black for soft and hard floorings. Small plastic parts black through-dyed. Seat Task, visitor and conference chairs Highly elastic, flexibly suspended seat shell with seat upholstery panel made of black, through-dyed polypropylene, polyurethane seat cushion covered in the same material as the backrest cover in Fiberflex, or fabric. Seat can be replaced. In models with management grade upholstery (174 / 71, 175 / 71, 171 / 71) seat cushion with extra padding and side facings, optionally also in leather. Optionally available with seat depth adjustment of 400 – 450 mm (15¾" – 17¾”) for all types of upholstery.
3D armrest
Flexframe
Swing plate
Seat Seat bearer Button/knob Mechanism cover
9
Back
Seat and back
Armrests
Task, visitor and conference chairs Elastic back frame, height adjustable by 60 mm (2⅜") in six lockable positions, made of through-dyed, fibre glass reinforced polyamide, covered with Fiberflex, optionally also with fabric (with additional padding). In models with management grade upholstery (models 174 / 71, 175 / 71, 171 / 71) back frame optionally with back cushion too. Backrest upholstery with additional padding, front of backrest also with concealed, cut foam fleece sewn into the cover and with side facings, optionally with leather cover. Medium-high and high back rest, high backrest optionally with headrest (height 16 cm (6¼")), either in the same material as the backrest cover, or covered in leather on the front. Back is replaceable.
Cantilever / four-legged visitor chairs Unitary shell-frame design made of through-dyed, fibre glass reinforced polypropylene. Seat cushion made of polyurethane moulded foam, in models with management grade upholstery (models 176 / 71, 178 / 71) with additional padding and side facings. In models 176 / 7, 178 / 7 seat cushions covered in the same material as the backrest cover in Fiberflex or fabric, models 176 / 71 and 178 / 71 with management grade upholstery or in leather. Seat can be replaced. Back frame covered in Fiberflex, in models 176 / 7, 178 / 7 back optionally covered in fabric. Models with management grade upholstery (176 / 71 and 178 / 71) optionally with back cushion in fabric or leather, with additional padding, front of backrest also with concealed, cut foam fleece sewn into the cover and side facings, back cover replaceable.
Task chairs 3D armrests made of fibreglass reinforced, black through-dyed polyamide. Armrest pads made of black through-dyed polyurethane (TPU) optionally also made of polyurethane foam and covered in leather if desired. Armrest covers made of black, through-dyed polypropylene. Height of armrests adjustable by 100 mm (3⅞") (eight lockable positions), depth by 40 mm (15/8"), in each case can be swivelled 30° inwards and outwards.
Frame versions
Task chairs
5‑star base
50 51
Polyamide Bright chrome plated
The ON cantilevers and four-legged visitor chairs comply with DIN EN 13761, DIN EN 1022 and ANSI/BIFMA X5.1. The ON four-legged task and cantilever chairs qualify for the GS symbol.
Optionally, the ON task, visitor and conference chairs (without headrest) can also be shipped with disassembled backrests in boxes.
Visitor / conference chairs Rigid armrests made of fibreglassreinforced, black, through-dyed polyamide. Armrest pads made of black through-dyed polyurethane (TPU) optionally also made of polyurethane foam and covered in leather if desired. Armrest covers made of black, through-dyed polypropylene.
All visitor and conference chairs have glides for soft flooring (e.g. carpets). Conference and visitor chairs with Trimension, on request with swivel-mounted column not height adjustable, alternatively as four-legged type or cantilever chair, optionally stackable.
Cantilever / four-legged visitor chairs Armrest covers made of black, through-dyed polypropylene. On non-stackable chairs, optionally with upholstered armrests, when covered in fabric with black leather 74 / 99, when covered in leather to match the colour of the leather.
Accessories Optional for visitor chair, model 176 / 7: Inline connectors, model 177 made of zinc-plated steel, twowheeled cart, model 176 for 8 visitor chairs. Optional for cantilever, model 178 / 7, four-wheeled trolley, model 178 for 8 cantilevers.
Standards The ON task, visitor and conference chairs comply with office chair standard DIN EN 1335, type A or B, of ANSI / BIFMA X 5.1. If required also available and compliant with NPR 1813.
Please note: The prices for types with cushioning including fabrics and leather provided by the customer are given on request.
Swing plates
52 53 60
Coated silver satin finish or black Silver satin finish or black coating or bright cromium plated Aluminium polished Aluminium polished Coated black Coated black Coated, silver satin finish Coated, silver satin finish
Visitor chairs 51
Round steel tube frame Bright chrome plated
Cantilever chair 51
Round steel tube frame Bright chrome plated
Mechanism cover Aluminium blasted Aluminium blasted Aluminium blasted Aluminium blasted Aluminium blasted
Castors, glides, frame components, adjustment levers Small components
41 Black
Accessories
177 Inline connector (for model 176/7) 176 Two-wheeled cart for 8 visitor chairs 178 Four-wheeled trolley for 8 cantilevers
10
€ 33 603 624
Upholstery material
ON® Task chairs
Medium-height backrest ¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
174/7 With seat cushion, With 3‑D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates
35
47
54
60 62 63 66 67 69
€
€
€
€
734
787
799
811
77
93
106
Additional charge Covered backrest
High backrest ¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")
175/7 With seat cushion, With 3‑D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates
921
974
986
998
Additional charges Covered backrest Headrest in the same material as the backrest cover Headrest covered in leather on the front
68 109
87 68 109
109 68 109
130 68 109
€ Additional charges/reduced prices specific to range
Aluminium-coated star base and swing plates Aluminium polished star base and swing plates Bright chrome plated aluminium star base, aluminium-coated swing plates Bright chrome plated aluminium star base and swing plates
78 145 156 330
Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated Anti-static castors
76 46 172 34 40
Without armrests
– 60
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame).
11
Upholstery material
ON® Conference/visitor chairs
Medium-height backrest ¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
171/7 With seat cushion, rigid armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Frame aluminium coated
35
47
54
60 62 63 66 67 69
€
€
€
€
826
879
891
903
Additional charge/reduced prices Covered backrest Aluminium polished star base and swing plates Bright chrome plated aluminium star base, aluminiumcoated swing plates Bright chrome plated aluminium star base and swing plates
68
77 68
93 68
106 68
78 252
78 252
78 252
78 252
Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated
76 46 172 34
76 46 172 34
76 46 172 34
76 46 172 34
Without armrests
– 60
– 60
– 60
– 60
Available with pivotable column, not height adjustable (at no extra cost).
12
Upholstery material
ON® Conference/visitor and cantilever chairs
Standard height backrest ¡ 43 ¶ 90 ¢ 64 | 64 (¡ 16⅞" ¶ 35⅜" ¢ 25¼" | 25¼")
176/7 With seat cushion, Stackable 5‑high free-standing, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated
35
47
54
60 62 63 66 67 69
€
€
€
€
433
486
498
510
77
93
106
523
535
547
77
93
106
Additional charge Covered backrest
Standard height backrest ¡ 43 ¶ 92 ¢ 61 | 60 (¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")
178/7 With seat cushion, Stackable 5‑high free-standing, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated Additional charge Covered backrest
470
€ Additional charges/reduced prices specific to range
Leather-upholstered armrests (not stackable)
172
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
13
Upholstery material
ON® Task chairs with management grade upholstery
Medium-height backrest ¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
60 62 63 66 67 69
74
87
€
€
€
1066
1362
1442
329 172
450 172
592 200
175/71 Seat with management grade upholstery, With 3‑D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates
1197
1493
1573
Additional charges Back with management grade upholstery Leather-upholstered armrests Headrest in the same material as the backrest cover Headrest covered in leather on the front
354 172 89 131
484 172 131
626 200 145
174/71 Seat with management grade upholstery, With 3‑D armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated swing plates Additional charge Back with management grade upholstery Leather-upholstered armrests
High backrest ¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")
€ Additional charges/reduced prices specific to range
Aluminium-coated star base and swing plates Aluminium polished star base and swing plates Bright chrome plated aluminium star base, aluminium-coated swing plates Bright chrome plated aluminium star base and swing plates Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Mechanism cover silver satin finish or black coated Anti-static castors Without armrests
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame).
14
78 145 156 330 76 46 34 40 – 60
ON® Conference/visitor chairs with management grade upholstery
Medium-height backrest ¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
Upholstery material 60 62 63 66 67 69
74
87
€
€
€
1143
1439
1519
329 68
450 68
592 68
78 252
78 252
78 252
Seat depth adjustment (approx. 400 to 450 mm (15¾" to 17¾")) Polyurethane foam armrest pad Leather-upholstered armrests Mechanism cover silver satin finish or black coated
76 46 172 34
76 46 172 34
76 46 200 34
Without armrests
– 60
– 60
– 60
171/71 Seat with management grade upholstery, rigid armrests, Backrest covered in Fiberflex fabric, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Frame aluminium coated Additional charge/reduced prices Back with management grade upholstery Aluminium polished star base and swing plates Bright chrome plated aluminium star base, aluminium-coated swing plates Bright chrome plated aluminium star base and swing plates
Available with pivotable column, not height adjustable (at no extra cost).
15
ON® Conference/visitor and cantilever chairs with management grade upholstery
Standard height backrest ¡ 43 ¶ 90 ¢ 64 | 64 (¡ 16⅞" ¶ 35⅜" ¢ 25¼" | 25¼")
Standard height backrest ¡ 43 ¶ 92 ¢ 61 | 60 (¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")
Upholstery material 60 62 63 66 67 69
74
87
€
€
€
176/71 Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated
751
1047
1127
Additional charge Back with management grade upholstery Leather-upholstered armrests
329 172
450 172
592 200
178/71 Seat with management grade upholstery, Backrest covered in Fiberflex fabric, Polypropylene armrests Frame bright chrome plated
789
1085
1165
Additional charge Back with management grade upholstery Leather-upholstered armrests
329 172
450 172
592 200
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
16
180 range Neos Design: wiege
Technical details Function Task chairs with automatic synchroadjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. A crank handle allows infinitely variable tension adjustment for the user. Backrest position lockable in four different positions by engaging lever. Encapsulated gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height of task chairs. Adjustment of backrest height in six positions within a range of 60 mm (2⅜"); models with mesh membrane backrest have lumbar support adjustable within a range of 60 mm (2⅜") instead of the height-adjustable backrest. All models feature adjustment of seat depth in eleven positions between 385 – 435 mm (15⅛" – 17⅛"). Models with a mesh membrane backrest as for task chair versions. Cantilever chairs: chair, stackable up to 5‑high, for visitors, meetings, conferences and seminars to match task chairs; with resilient, singlesection seat shell, integral stacking buffer and outer rail / grip on the backrest. Model 183 / 3 with leather covering (74) and 183 / 5 not stackable.
Frame
Back
Task chairs Five-star base in glass fibre-reinforced polyamide, through-dyed in black-grey, or in die-cast aluminium, polished, high-lustre polished or bright chrome plated. Twin wheel swivel castors with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors (please specify when ordering). Anti-static castors on request (in combination with alu minium frame). Synchro-mechanism case in die-cast aluminium. Synchro-mechanism cover in blackgrey through-dyed polypropylene. Seat bearer in glass fibre-reinforced polyamide, through-dyed in blackgrey. See table below for frame finishes.
Task chairs Backrest shell in polyamide with back shell cover in polypropylene, through-dyed in black-grey or white. Upholstery: covered, onepiece moulded foam, exchangeable. Model 181/ 6 with backrest frame in glass fibre-reinforced polyamide, in black-grey, covered with semi-transparent, black-grey, lightgrey or white high-performance polyester; lower section of backrest frame covering in polypropylene, in black-grey; optional lumbar support in polyamide, black-grey through-dyed with integral foam overlay.
Cantilever chairs Frame in round steel tube, Ø 22 mm (⅞"), thickness 3 mm (⅛"), bright chrome plated, with anti-tilt stoppers in black-grey polyamide as the standard version for carpeted floors, optionally with glides in black-grey polyamide (for soft floors) or black-grey polyurethane (for hard floors), optionally with additional felt insert (please specify when ordering); outer rail / grip in die-cast zinc, bright chrome plated. Seat Task chairs Seat shell in polypropylene, through-dyed in black-grey or white. Upholstery: covered, one-piece moulded polyurethane foam with integral pelvic support, exchangeable. Adjustment of seat depth: on request, depth of seat platform individually adjustable from 385 – 435 mm (15⅛" – 17⅛"). The seat shifts in such a way that ensures that the angle of the pelvic wedge automatically adjusts to the position of the seat shell.
Seat and back Single-section seat and back shell in resilient polypropylene, throughdyed in black-grey or white. Seat cushion: exchangeable, with concealed screw fittings; comprising covered, one-piece moulded poly urethane foam. Optional, exchangeable back cushion with same features as the seat cushion. Model 183 / 3 with leather covering not stackable. Model 183 / 5 (not stackable) with leather-covered seat and back cushions with woolfleece overlay and side facings, optionally with seat and back shell covered with leather on the back sections.
Standards Neos task chairs conform to the Office Chair Standards DIN EN 16139 and DIN EN 13761, ANSI / BIFMA X 5.1 (except for model 181 / 6) and other international office chair standards. Version conforming to NPR 1813 on request. Depending on selected features, they meet the requirements of categories A or B of the Office Chair Standard DIN EN 1335.
Neos task chairs comply with the “Ergonomics Approved” requirements.
The cantilever and visitor charis comply with DIN EN 16139-L1 and DIN EN 13761.
Armrests Task chairs 3‑D armrests in glass fibre-reinforced polyamide, through-dyed in black-grey or white, with blackgrey polyurethane pad, adjustable by 100 mm (3⅞") in height and 50 mm (2") in depth; they can be pivoted inwards and outwards by 15°.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
5‑star base
Frame versions 50 51 52 72 Accessories
Cantilever chairs
Cantilever chairs Armrests comprise round sleeves in a black-grey or white tactile, PVC‑free elastomer material. Model 183 / 5, or optionally with solid-wood armrest pads, oak, maple or walnut natural finish.
Polyamide Bright chrome plated Aluminium polished Aluminium high-lustre polished
183 Four-wheeled trolley for eight stackable cantilever chairs
€ 414
17
Neos Task chairs
Medium-height backrest ¡ 40/52 ¶ 98/110 ¢ 66 | 64 (¡ 15¾"/20½" ¶ 38⅝"/43¼" ¢ 26" | 25¼")
Medium-height backrest ¡ 40/52 ¶ 98/110 ¢ 66 | 64 (¡ 15¾"/20½" ¶ 38⅝"/43¼" ¢ 26" | 25¼")
47
Upholstery material 54 60 74 62 63 66 67 69
€
€
€
€
181/71 With seat and back cushion, With 3‑D armrests, Infinitely variable height adjustment, Adjustment of backrest height and seat depth, Automatic synchro-adjustment, tension control Frame polyamide
520
538
580
871
Additional charge Seat and back shell and 3‑D armrests through-dyed in white (black-grey armrest pad is standard)
102
102
102
102
181/6 With seat cushion and transparent backrest, With 3‑D armrests, Infinitely variable height adjustment, Adjustment of seat depth, Automatic synchro-adjustment, tension control Frame polyamide
520
538
580
715
35 8
35 8
35 8
35 8
Additional charges Height-adjustable lumbar support Polyester material in light-grey or white
€ Additional charges/reduced prices specific to range
Frame aluminium polished Frame aluminium high-lustre polished Frame aluminium bright chrome plated Anti-static castors
40
Without armrests
– 60
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors (in combination with aluminium frame).
18
66 84 133
Neos Cantilever chairs
Standard height backrest ¡ 43 ¶ 80 ¢ 55 | 60 (¡ 16⅞" ¶ 31½" ¢ 21⅝" | 23⅝")
Standard height backrest ¡ 43 ¶ 80 ¢ 58 | 60 (¡ 16⅞" ¶ 31½" ¢ 22⅞" | 23⅝")
47
Upholstery material 54 60 74 62 63 66 67 69
€
€
€
€
183/3 With seat cushion, backrest not upholstered, Stackable 5‑high free-standing, up to 8‑high on twowheeled cart, with leather covering, not stackable, With plastic-covered armrests Frame bright chrome plated
421
430
448
595
Additional charges Seat/back shell and armrest pad through-dyed white Back cushion
28 67
28 70
28 74
28 149
183/5 With seat and back cushion, Not stackable, With wool fleece underlay and side facings, Cushioned armrest pads, Leather-covered with triple-sewn seam Frame bright chrome plated
1185
Additional charge/reduced prices Seat and back shell covered with leather on the back sections Solid-wood armrests
205 – 160
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
19
20 range Stitz 2
Design: ProduktEntwicklung Roericht
Technical details Function The Stitz is a leaning aid with infinitely variable height adjustment by means of an encapsulated gas lift.
Frame Black elastomer base filled with quartz sand. Black polyamide base plate.
Seat Black polyamide seat frame. Cork inset, optionally hard wax treated, covered in fabric or in embossed leather. Gas lift lever for height adjustment, accessible all round, underneath black polyamide seat base.
Upholstery material
€ Stitz ¶ 60/83 ¢ 31 (¶ 23⅝"/32⅝" ¢ 12¼")
20
201/1 Seat surface cork Frame black 201/2 Frame black
60 63 66 67
74
€
€
526
550
471
21 range FS-Line
Design: Klaus Franck, Werner Sauer
Technical details Function Task chairs with automatic synchroadjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. The person sitting on it can infinitely adjust the tension. Forward position lockable by engaging lever. Gas lift, DIN 4550 compliant, to allow infinite adjustment of the seat height. Conference chairs / visitor chairs with automatic synchro-adjustment, without front locking position, with fixed seat height.
Frame Task chairs: Die-cast aluminium star base, bright chrome plated, polished or coated. Twin wheel swivel castors in black polyamide with load-dependent braking, DIN EN 12529 compliant, as a standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Swivel arms in die-cast aluminium, bright chrome plated or coated in the same colour depending on star base (coated black for polished star-base). Cantilever chairs: Frame for models 212/5 in round steel tube, bright chrome plated or coated; stackable version with bright chrome plated frame only. Frame of model 220 in oval aluminium tube, bright chrome plated or coated. Cantilever model 212 with anti-tilt stoppers as the standard version for carpeted floors, with additional glides for hard floors, on request with felt insert.
Frame versions
Small components
Backrest of task chairs 211 and 213 optionally with integral, adjustable lumbar support. Seat upholstery: one-piece moulded foam covered, exchangeable. Seat and back Models 220/6 to 220/9 Tubular steel frame with flexible middle section, over which is stretched an elastic mesh and the whole is moulded in foam. Armrests in integral foam, leather-covered, in black for fabric cover and in matching colour leather for leather cover. Cover with stitched fluting, exchangeable, or cover with integral slim cushion, exchangeable.
Standards FS task chairs are compliant with the Office Chair Standard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. Depending on selected features, they meet the requirements of categories B or C of the Office Chair Standard DIN EN 1335. FS cantilever chairs comply with DIN 68878-1.
The FS task chairs comply with the “Ergonomics Approved“ standard.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Task chairs
Star base and swing arms
51 52 53 60
Bright chrome plated Star base aluminium polished – swing arms coated (black) Coated black Coated, silver satin finish
Cantilever chair
Round steel tube frame or oval aluminium tube frame
51 53 60
Bright chrome plated Coated black Coated, silver satin finish
Castors or glides, frame components, armrests, adjustment levers 41
Accessories
Seat and back Models 211/1 to 213/8 Seat and backrest shell in viscoelastic, through-dyed polypropylene with a flexible middle section in the colours 91 natural white 92 platinum 97 asphalt 99 black. Standard armrests in the same material, black.
Black
214 Four-wheeled trolley for eight stackable cantilever chairs
€ 538
21
Upholstery material 54 60 63 66 67 69
FS-Line Conference/visitor chairs
Standard height backrest ¡ 42/53 ¶ 88/99 ¢ 63 | 60 (¡ 16½"/20⅞" ¶ 34⅝"/39" ¢ 24¾" | 23⅝")
211/8 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge Height-adjustable lumbar support
High backrest ¡ 42/53 ¶ 105/116 ¢ 65 | 62 (¡ 16½"/20⅞" ¶ 41⅜"/45⅝" ¢ 25⅝" | 24⅜")
213/8 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge Height-adjustable lumbar support
Counter chair ¡ 52/63 ¶ 109/120 ¢ 65 | 63 (¡ 20½"/24¾" ¶ 42⅞"/47¼" ¢ 25⅝" | 24¾")
211/1 One-piece seat and back shell, upholstered, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, with foot ring (not height adjustable) Frame aluminium coated
€
€
795
839
59
59
921
965
59
59
1063
1107
€ Additional charges/reduced prices specific to range
Frame aluminium polished Frame aluminium bright chrome plated
44 90
Anti-static castors
40
Without armrests
– 74
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).
22
FS-Line Task chairs
Medium-height backrest ¡ 42/52 ¶ 92/102 ¢ 67 | 63 (¡ 16½"/20½" ¶ 36¼"/40⅛" ¢ 26⅜" | 24¾")
220/8 One-piece seat and back frame, fully upholstered, With stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge Slim cushion * Leather 87 available with slim cushion only
High backrest ¡ 42/52 ¶ 108/118 ¢ 67 | 63 (¡ 16½"/20½" ¶ 42½"/46½" ¢ 26⅜" | 24¾")
220/9 One-piece seat and back frame, fully upholstered, With stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge Slim cushion * Leather 87 available with slim cushion only
60 63 66 67
62
€
€
2245 184
€
€
2245
2853
(2853)*
259
649
3324
(3324)*
289
728
184
2606 229
Upholstery material 69 74 87
2606 229
€
€ Additional charges/reduced prices specific to range
Frame aluminium polished Frame aluminium bright chrome plated
44 90
Anti-static castors
40
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).
23
FS-Line Conference chairs/visitor chairs
Standard height backrest ¡ 44 ¶ 89 ¢ 63 | 60 (¡ 17⅜" ¶ 35" ¢ 24¾" | 23⅝")
Medium-height backrest ¡ 42 ¶ 92 ¢ 67 | 63 (¡ 16½" ¶ 36¼" ¢ 26⅜" | 24¾")
211/6 Swivel-mounted, One-piece seat and back shell, upholstered, Automatic synchro-adjustment, tension control Frame aluminium coated
220/6 Swivel-mounted, one-piece seat and back frame, fully upholstered, With stitched fluting, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge Slim cushion * Leather 87 available with slim cushion only
High backrest ¡ 42 ¶ 108 ¢ 67 | 63 (¡ 16½" ¶ 42½" ¢ 26⅜" | 24¾")
220/7 Swivel-mounted, one-piece seat and back frame, fully upholstered, With stitched fluting, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charge Slim cushion * Leather 87 available with slim cushion only
Upholstery material 69 74 87
54
60 63 66 67
62
€
€
€
707
751
751
2157
2157
184
184
2518 229
€
2518 229
€
€
2765
(2765)*
259
649
3236
(3236)*
289
728
€ Additional charges/reduced prices specific to range
Frame aluminium polished Frame aluminium bright chrome plated
44 90
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
24
FS-Line Cantilever chairs
Standard height backrest ¡ 44 ¶ 85 ¢ 56 | 61 (¡ 17⅜" ¶ 33½" ¢ 22" | 24")
212/5 One-piece seat and back shell, upholstered, Frame coated Additional charges Frame bright chrome plated Stackable version (in combination with frame bright chrome plated only, stackable 5‑high free-standing, up to 8‑high on four-wheeled trolley)
Upholstery material 69 74 87
54
60 63 66 67
62
€
€
€
506
550
550
33
33
33
71
71
71
€
€
€
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
25
21 range FS Management
Design: Klaus Franck, Werner Sauer, wiege
Technical details Function Task chairs with automatic synchroadjustment: the seat and backrest automatically tilt to any posture the person adopts. When leaning back, the backrest tension increases proportionately. The person using the chair can infinitely adjust the tension. The front position is lockable by engaging the lever. DIN 4550 compliant gas lift for infinite adjustment of the seat height.
Frame Die-cast aluminium, bright chrome plated star base. Twin wheel swivel castors with load-dependent braking, made of black polyamide in accordance with DIN EN 12529 as the standard version for carpets; with grey soft polyurethane facing for hard floors. Castors optionally electrically conductive. Black poly amide glides as the standard version for carpets and in black polyurethane for hard floorings. Die-cast aluminium, bright chrome plated swivel arms.
Seat and back Steel tube frames with a flexible middle section, covered with elastic mesh. Foam upholstery with additional cushioning. Exchangeable cover with wider stitched fluting. Integral foam armrests, leather- covered with stitched seam.
Standards The FS task chairs comply with DIN EN 1335, ANSI / BIFMA X 5.1 and other international office chair standards. Depending on the version they also fulfil the requirements of categories B or C of the DIN EN 1335 office chair standard.
Standards The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Frame versions
Small components
Task chairs
Star base and swing arms
51
Bright chrome plated
Castors or glides, frame components, armrests, adjustment levers 41
26
Black
Upholstery material 74
FS Management Task chairs
€ Medium-height backrest ¡ 42/52 ¶ 100/110 ¢ 67 | 63 (¡ 16½"/20½" ¶ 39⅜"/43¼" ¢ 26⅜" | 24¾")
High backrest ¡ 42/52 ¶ 116/126 ¢ 67 | 63 (¡ 16½"/20½" ¶ 45⅝"/49⅝" ¢ 26⅜" | 24¾")
220/82 One-piece seat and back frame, fully upholstered, with wider stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium bright chrome plated
2636
220/92 One-piece seat and back frame, fully upholstered, with wider stitched fluting, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium bright chrome plated
3053
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors.
27
230 range Aline
Design: Andreas Störiko
Technical details Function Stylish and coherently designed, multi-purpose furnishing range for meetings, consultations and seminars, in showrooms and event spaces, areas for breaks, lounges and bistros, as well as libraries, internet cafés or a home office.
Multi-purpose chair Light, transparent, stackable multipurpose chair for meetings, consultations, seminars and large-scale events. Very compact, form-fit stacking, with each chair adding only 20 mm (¾") to the height of the stack due to self-engaging, covered seat and back frames (total height of 15 stacked chairs is 106 cm (41¾"). Weight 5.1 kg only (without armrests), 5.4 kg with armrests. Model 233 only weighs 5.9 kg (without armrests) or 6.2 kg (with armrests). Multi-purpose chair, optionally with seat cushion, available as a stackable or a non-stackable version. The stackable types have extra bumpers and can be stacked extremely compactly and in a form-fit manner. Counter / bar height stool Stylish and transparent bar stool with backrest and footrest bar, optionally with seat cushion. Task chairs and visitor chairs Simple, transparent visitor task chairs and height-adjustable office task chairs for meetings and consultations, Internet cafés, showrooms and hot desking spaces. Tables Square and circular top pedestal tables in low, sitting and standing height (optionally stackable) and rectangular tables on a T-shaped base for lounges and recreational areas, cafeterias and bistros.
Chairs Frame Multi-purpose chair Multi-purpose chair: Skid base in round steel tubing, 12 mm (½") in diameter, bright chrome plated. The skid base supports the front seat frame and integrates with the backrest frame at the rear. On request, with additional glides in black polyamide for soft floors, optionally with extra felt. Please note for models 233/1, 233/2: When ordering inline connectors model 238, multi-purpose glides are automatically applied, optionally with additional felt for floors that are sensitive to scratching (e.g. stone, parquet). Inline connectors are not possible in model 231. Counter and bar height stool As for multi-purpose chair, but not stackable. Additional bright chrome plated stretchers (16 x 6 mm) (5/8" x ¼") that form a stable structural grid, integrating a recessed footrest bar in round steel rod. Task chair and visitor chair Four-star base (visitor chair) or fivestar base (task chair) in die-cast aluminium, bright chrome plated. Visitor chair with glides in black polyamide (for soft floors) or black polyurethane (for hard floors), optionally with additional felt insert. Task chair with twin wheel swivel castors in black polypropy lene with load dependent braking (for soft floors) or with a soft lining (for hard floors); anti-static castors on request. Fixed height swivel pedestal with contact suppression feature (visitor chair) or additional infinitely height adjustable pedestal (task chair), bright chrome plated tube. Seat and back In models 231/1, 230/2, 230/5, 230/6 seat and back frames in highperformance, glass fibre-reinforced polyamide, optionally throughdyed in black, grey or white, with resilient coated polyester membrane optionally in the same colour as the seat and back frames. In through-dyed black seat and back frames, optionally available with a two-tone cover in copper-black or silver-black. Back frame optionally without armrests or with armrests in matching material and colour. Optionally with a polypropylene seat shell and cut-foam seat cushion. Stackable types (only models
28
230 / 1 and 230 / 2) with glass-fibrereinforced polyamide bumper that colour-matches the seat- and backrest frame. Models 232 / 1, 232 / 2, 233/4, 233/6 Seat and back frame made of highperformance glass-fibre-reinforced polyamide, optionally black or white through-dyed, optionally with or without armrests in the some material and colour. Plastic membrane made of through-dyed polyamide like the seat and back frame. Optionally with cut foam seat cushion. Stackable versions (only models 233/1 and 233/2) with glass-fibrereinforced bumpers in the same colour as the seat and back frame. Task and visitor chairs (models 232 / 1, 232 / 2, 231 / 1, 231 / 2) optionally with cut-foam seat cushion, with cover in fluted stitching, cushioning 10 mm thick. Tables Frame Models 235/236 Four-star base in die-cast aluminium, bright chrome plated, with glides in black polyamide (for soft floors) or black polyurethane (for hard floors), optionally with additional felt insert. Central column in 4 mm (⅛") steel tube, diameter 40 mm (15/8"), for low, sitting and standing height (45 / 73 / 105 cm) (17¾"/ 28¾"/ 41⅜"), coated in black or white to match top surface, with steel flange coated black; stackable version additionally with slip-free separator, collar and docking guide in black plastic. Model 237/00 Unitary, die-cast aluminium foot section, optionally bright chrome plated, or coated in black or white. Black polyamide glides (for soft flooring), or black polyurethane (for hard flooring), optionally with additional felt insert. Aluminium upright to match table top, black or white coated, or optionally bright chrome plated. Underframes made of rectangular steel tube with flange, depending on the foot section, coated black or white. If the foot section is bright chrome plated, black coating.
Core material of table top Models 235 / 236 / 237 Table top in through-dyed HPL (high pressure laminate) in the colours black or white. Each with thickness 12 mm (½"). Models 235 / 236 in sizes: 60 x 60 cm (235/8" x 235/8") (for table heights 45 (17¾") and 105 cm (41⅜")) and 70 x 70 cm (27½" x 27½") (for table heights 73 cm (28¾")) and circular, diameter 75 cm (29½") (for table heights 45 (17¾") and 73 cm (28¾") and diameter 70 cm (27½") (for table height 105 cm (41⅜")). Models 237 in sizes: (Table height 73 cm (28¾")) 70 x 140 cm (27½" x 55⅛") 75 x 150 cm (29½" x 59") 80 x 160 cm (31½" x 63") 90 x 180 cm (35⅜" x 70⅞") 90 x 200 cm (35⅜" x 78¾")
Table top group 2 – veneer Thickness 20 mm (¾") Variation 1: Beech or oak veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Veneer version As a standard, veneers are slipmatched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: beech v eneer. Some specific growth features possible.
With veneered version (on request): MDF panel only in combination with veneered surface finish with colour-matched, chamfered wood lipping (with a radiused edge). Exception: maple or ash with a natural finish is not available.
Tables Round pedestal tables in four different formats (Ø 90 – 140 cm) for large conferences, meetings or as home dining tables.
Frame versions
ulti-purpose and counter M chairs Frame 51
Frame models 237/2, 4, 5 Steel disc base (610 mm (24") in diameter) with sheet-steel cover coated white or black or with optional cover in lustre-polished stainless steel.
Frame model 237/6 Steel disc base (735 mm (28⅞") in diameter) with sheet-steel cover coated white or black with optional cover in lustre-polished stainless steel.
Accessories Models 237/2, 4, 5, 6 Optionally for the multi-purpose chair: Automatically retractable inline connectors (only models 230/1, 230/2) made of matt chrome- plated steel. In-line connectors for models 233/1, 233/2 are available only in conjunction with multi- purpose glides made of black POM for hard and soft flooring, or with felt insert for floors susceptible to scratching. Chairs with armrests can only be linked alternately with chairs without armrests. Stackable four-wheeled trolley made of blackcoated steel tubing with four ballbearing mounted castors for hard and soft flooring, two of which are lockable directional wheels.
able column made of steel tubing T (80 mm (3⅛") in diameter) coated white or black, optionally bright chrome plated. Table top bearer made of rectangular tubing coated black.
Standards Aline stackable chairs conform to the Office Chair Standard DIN EN 13761 and ANSI/BIFMA X 5.1. Aline-S currently being prepared for DIN EN 16039-L1.
Table column made of steel tubing (80 mm (3⅛") in diameter) coated white or black, optionally bright chrome plated. Table top bearer made of rectangular tubing coated black.
Core material of table top MDF table top (medium-density fibreboard), white, or black powder coated with chamfered edge. Each table top 25 mm (1") thick.
Bright chrome plated
Task chair and visitor chair Frame 51
Bright chrome plated
Tables (235 / 1 – 236 / 3)
Star base
Table column
51
Bright chrome plated
Coated, black or white
Tables (237 / 00)
Foot sections
Upright
Underframe
49
Coated white
Coated white
Coated white
51
Bright chrome plated
Coated black
53
Coated black
Black coated or bright chrome plated Coated black
Tables (237 / 2, 4, 5, 6)
Disc base with cover
Table column
Table top bearer
49
Coated white
Coated white
Coated black
53
Coated black
Coated black
Coated black
71
Polished stainless steel
coated or bright chrome plated
Coated black
Coated black
€ Accessories
231 Inline connector (for models 230/1 and 230/2) 232 Four-wheeled trolley for 20 multi-purpose chairs 234 Seat/row number clip (for models 230/1 and 230/2) 235 Sheets of self-adhesive labels for numbering 1 set (1 – 400 for seats and 1 – 100 for rows) 236 Four-wheeled trolley for 16 multi-purpose chairs with seat cushion 238 Inline connector (for models 233/1 and 233/2)
42 545 9 19 545 32
29
Upholstery material 47 54 60 63 66 67
Aline-S Chairs
€ Multi-purpose chair ¡ 44 ¶ 78 ¢ 54 | 58 (¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")
233/1 Multi-purpose chair, up to 15-high free-standing, Seat and back frame with plastic membrane Frame bright chrome plated Additional charges Inline connector * Higher backrest (overall height 80 cm, 31½") Seat cushion Seat cushion, stackable version, up to 10 chairs
Multi-purpose chair ¡ 44 ¶ 78 ¢ 59 | 58 (¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")
233/2 With armrests Multi-purpose chair, up to 15-high free-standing, Seat and back frame with plastic membrane Frame bright chrome plated Additional charges Inline connector * Higher backrest (overall height 80 cm, 31½") Seat cushion Seat cushion, stackable version, up to 10 chairs
Counter/bar height stool ¡ 69 ¶ 105 ¢ 54 | 61 (¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")
233/4 Footrest, Seat and back frame with plastic membrane Frame bright chrome plated
233/6 With armrests Footrest, Seat and back frame with plastic membrane Frame bright chrome plated Additional charge Seat cushion
€
€
109 126
122 139
134 151
109 126
122 139
134 151
109
122
134
109
122
134
230 32 17
270 32 17
340
Additional charge Seat cushion
Counter/bar height stool ¡ 69 ¶ 105 ¢ 54 | 61 (¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")
€
380
€ Additional charges/reduced prices specific to range
Glides for soft floors Glides with felt insert
* Inline connectors only possible in combination with special multi-purpose glides All chairs are suitable for soft floors (e.g. carpet). On request, with glides in black polyamide if used on different types of flooring, optionally with additional felt insert (for scratch-sensitive floors such as stone, parquet). When linked, stackable chairs with armrests must alternate with stackable chairs without armrests.
30
8 12
Upholstery material 47 54 60 63 66 67
Aline Chairs
€ Multi-purpose chair ¡ 44 ¶ 78 ¢ 54 | 58 (¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")
230/1 Multi-purpose chair, up to 15-high free-standing, Seat and back frames with membrane Frame bright chrome plated Additional charges Inline connector Higher backrest (overall height 80 cm, 31½") Seat cushion Seat cushion, stackable version, up to 10 chairs
Multi-purpose chair ¡ 44 ¶ 78 ¢ 59 | 58 (¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")
230/2 With armrests Multi-purpose chair, up to 15-high free-standing, Seat and back frames with membrane Frame bright chrome plated Additional charges Inline connector Higher backrest (overall height 80 cm, 31½") Seat cushion Seat cushion, stackable version, up to 10 chairs
Counter/bar height stool ¡ 69 ¶ 105 ¢ 54 | 61 (¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")
230/5 Footrest, Seat and back frames with membrane Frame bright chrome plated
230/6 With armrests Footrest, Seat and back frames with membrane Frame bright chrome plated Additional charge Seat cushion
€
€
93 110
106 123
119 137
93 110
106 123
119 137
93
106
119
93
106
119
338 41 17
378 41 17
448
Additional charge Seat cushion
Counter/bar height stool ¡ 69 ¶ 105 ¢ 59 | 61 (¡ 27⅛" ¶ 41⅜" ¢ 23¼" | 24")
€
488
€ Additional charges/reduced prices specific to range
Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) Outdoor version Glides for soft floors Glides with felt insert
23 13 8 12
All chairs are suitable for soft floors (e.g. carpet). On request, with glides in black polyamide if used on different types of flooring, optionally with additional felt insert (for scratch-sensitive floors such as stone, parquet). When linked, stackable chairs with armrests must alternate with stackable chairs without armrests.
31
Aline Task/visitor chairs
€ Task chair ¡ 40/52 ¶ 76/88 ¢ 65 | 64 (¡ 15¾"/20½" ¶ 29⅞"/34⅝" ¢ 25⅝" | 25¼")
232/1 Seat and back frames with membrane, Infinitely variable height adjustment Frame bright chrome plated
542
Additional charges Higher backrest (overall height 78/90 cm, 30¾"/35⅜") Anti-static castors
Task chair ¡ 40/52 ¶ 76/88 ¢ 65 | 64 (¡ 15¾"/20½" ¶ 29⅞"/34⅝" ¢ 25⅝" | 25¼")
232/2 With armrests, Seat and back frames with membrane, Infinitely variable height adjustment Frame bright chrome plated
17 40
582
Additional charges Higher backrest (overall height 78/90 cm, 30¾"/35⅜") Anti-static castors
Visitor chair ¡ 45 ¶ 80 ¢ 50 | 57 (¡ 17¾" ¶ 31½" ¢ 19⅝" | 22½")
Visitor chair ¡ 45 ¶ 80 ¢ 59 | 57 (¡ 17¾" ¶ 31½" ¢ 23¼" | 22½")
231/1 Seat and back frames with membrane Frame bright chrome plated
17 40
519
Additional charge Higher backrest (overall height 82 cm, 32¼")
231/2 With armrests, Seat and back frames with membrane Frame bright chrome plated
17
559
Additional charge Higher backrest (overall height 82 cm, 32¼", armrests not below table height)
17
€ Additional charges/reduced prices specific to range
Polyester material in copper/black or silver/black (with black through-dyed seat and back frame only) Seat cushion with cover with stitched fluting (in combination with upholstery material 47 only)
23 111
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). All visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
32
Table top group 7 7 Black through-dyed
White through-dyed
Aline Tables
€
€
512
601
22
22
593
748
39
39
235/3 High table 60 x 60, H 105 (23⅝" x 23⅝", H 41⅜") Star base bright chrome plated Coated column
540
629
Additional charges Central column bright chrome plated Stackable design (up to 3 free-standing)
58 121
58 121
236/1 Low table, circular, Ø 75, H 45 (Ø 29½", H 17¾") Star base bright chrome plated Coated column
588
743
22
22
596
751
39
39
236/3 High table, circular, Ø 70, H 105 (Ø 27½", H 41⅜") Star base bright chrome plated Coated column
609
764
Additional charges Central column bright chrome plated Stackable design (up to 3 free-standing)
58 121
58 121
235/1 Low table 60 x 60, H 45 (23⅝" x 23⅝", H 17¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated
235/2 Table 70 x 70, H 73 (27½" x 27½", H 28¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated
Additional charge Central column bright chrome plated
236/2 Table circular, Ø 75, H 73 (Ø 29½", H 28¾") Star base bright chrome plated Coated column Additional charge Central column bright chrome plated
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
33
Table top group 9
MDF black or white powder coated
Aline Tables
€ 237/2 Table, Ø 90 cm, height 73 cm (Ø 35⅜", H 28¾") Coated disc base Coated column Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
145
237/4 Table, Ø 110 cm, H 73 cm (Ø 43¼", H 28¾") Coated disc base Coated column
971
Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
237/5 Table, Ø 125 cm, H 73 cm (Ø 49¼", H 28¾") Coated disc base Coated column Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
237/6 Table, Ø 140 cm, H 73 cm (Ø 55⅛", H 28¾") Coated disc base Coated column Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
34
767
83
83 145
1082
83 145
1542
100 162
Table top group White through-dyed €
859
1069
59
•
•
140
•
•
237/00 e.g. 75 x 150, H 73 (29½" x 59", H 28¾") Foot sections coated Uprights and under-frames coated Additional charges/reduced prices specific to range Foot sections bright chrome plated, uprights coated, under-frames coated Foot sections bright chrome plated, uprights bright chrome plated, under-frames coated
7
€
€ Rectangular
7 Black through-dyed
Aline Tables
Depth
Length 140 (55⅛") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
70 (27½") 856 – – – –
75 (29½") – 859 – – –
80 (31½") – – 864 – –
90 (35⅜") – – – 952 957
140 (55⅛") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
1053 – – – –
1069 – – –
– – 1085 – –
– – – 1233 1250
– not available
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
35
240 range Sito Design: wiege
Technical details Function Multi-purpose cantilever chair, optionally stackable, with three backrest heights and many upholstery variations for a wide range of applications. Springy and resilient due to structural configuration of cantilevered seat and backrest. Frame Frame in round steel tube, Ø 22 mm (⅞"). Brace in 6 mm (¼") flat steel to support cantilevered seat and back shells, bright chrome plated, matt chrome plated or coated. Standard version for carpeted floors with anti-tilt stoppers; with additional glides for hard floors, on request with an additional felt insert. Stackable versions are available with a bright chrome plated frame only. All models may additionally be fitted with a writing tablet (models 240 / 3, 241 / 3) in black plastic, which still allows chairs to be linked with inline connectors or stacked.
Seat and back Models 240/3 and 241/3 Seat and back in black-grey or white through-dyed, viscoelastic polypropylene. Seat with covered, one-piece moulded polyurethane foam, exchangeable; optional back cushion with covered, polyurethane cut foam. Model 244/55 with Club upholstery Seat and back made of viscoelastic polypropylene, covered on the back. Seat cushion exchangeable with covered polyurethane moulded foam section, with additional cut foam section and padding. Back cushioning exchangeable with covered polyether cut foam section and padding.
Armrests Armrest pads in black or white through-dyed polypropylene, or plywood with a beech face veneer with a natural finish, or stained in 84/83 grey or 84/89 dark grey, or maple face veneer with a natural finish. Upholstered armrests with black leather cover 74 / 99 for fabric cover, in the same colour leather for leather cover (models 240 / 51 and 241 / 51 leather-covered only).
Standards Sito cantilever chairs comply with office chair standards DIN EN 13761, DIN EN 16139-L1, DIN EN 1728 and ANSI/BIFMA X5.1.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Model 245/55 Seat made of viscoelastic poly propylene, covered on the back. Seat cushion exchangeable with covered polyurethane moulded foam section, with additional cut foam section and padding. Back made of moulded plywood. Back cushion with covered polyether cut foam section and padding. Models 247/55 and 248/55 with soft fill cushions Seat and back in moulded plywood. Seat with covered, onepiece moulded polyurethane foam; back with covered, polyurethane cut foam cushion, front of backrest additionally with concealed, cut foam fleece sewn into the cover.
Frame versions
51 53 58 60
Bright chrome plated Coated black Matt chrome plated Coated, silver satin finish €
Accessories
36
240 Writing tablet (right or left side) 242 Inline connector 243 Four-wheeled trolley for eight stackable cantilever chairs 310 Seat numbers
170 13 584 3
Sito Cantilever chairs
Low backrest ¡ 43 ¶ 77 ¢ 59 | 56 (¡ 16⅞" ¶ 30⅜" ¢ 23¼" | 22")
54
240/3 With seat cushion, backrest not upholstered, Polypropylene armrest pads Frame coated Additional charges Back cushion Seat/back shell and armrest pad through-dyed white Stackable version (in combination with frame bright chrome plated only, stackable 7‑high free-standing, up to 8‑high on four-wheeled trolley)
Medium-height backrest ¡ 43 ¶ 87 ¢ 59 | 57 (¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")
241/3 With seat cushion, backrest not upholstered, Polypropylene armrest pads Frame coated Additional charges Back cushion Seat/back shell and armrest pad through-dyed white Stackable version (in combination with frame bright chrome plated only, stackable 7‑high free-standing, up to 8‑high on four-wheeled trolley)
Medium-height backrest ¡ 43 ¶ 87 ¢ 59 | 56 (¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22")
241/51 Club upholstery, fully upholstered, With wool fleece underlay and side facings, Cushioned armrest pads, Leather-covered with triple-sewn seam Frame coated
Upholstery material 60 74 87 62 63 66 67 69
€
€
€
473
486
619
74 29
74 29
146 29
44
44
44
543
556
689
74 29
74 29
175 29
44
44
44
1477
€
1722
€ Additional charges/reduced prices specific to range
Frame bright chrome plated Frame matt chrome plated
29 85
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
37
Upholstery material 60 74 63 66 67
Sito Cantilever chairs
Medium-height backrest ¡ 43 ¶ 87 ¢ 59 | 57 (¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")
High backrest ¡ 43 ¶ 97 ¢ 59 | 58 (¡ 16⅞" ¶ 38¼" ¢ 23¼" | 22⅞")
Medium-height backrest ¡ 43 ¶ 87 ¢ 59 | 57 (¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")
High backrest ¡ 43 ¶ 97 ¢ 59 | 58 (¡ 16⅞" ¶ 38¼" ¢ 23¼" | 22⅞")
244/55 With seat and back cushion, fully upholstered, Polypropylene armrest pads Frame coated
245/55 With seat and back cushion, fully upholstered, Polypropylene armrest pads Frame coated
247/55 Soft fill cushions, fully upholstered, Polypropylene armrest pads Frame coated
248/55 Soft fill cushions, fully upholstered, Polypropylene armrest pads Frame coated
€
€
828
1086
880
1181
872
1130
924
1225
€ Additional charges/reduced prices specific to range
Frame bright chrome plated Frame matt chrome plated Laminated wood armrest pads Cushioned armrest pads
29 85 88 208
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
38
249 range Cura Design: wiege
Technical details Function With a lightweight appeal, these classically elegant lounge chairs and low tables are designed to furnish lounges, lobbies, informal meeting spaces or homes.
Chair
Tables
Frame Model 249 / 5 Resilient, bright chrome plated steel tube, diameter 25 mm (1"), thickness 3 mm (⅛") attached to flat steel supporting frame, width 25 mm (1"), thickness 6 mm (2/8"). Four glides in black-grey polyamide are standard (for soft floors); op tionally in black-grey polyurethane (for hard floors), on request with additional felt insert.
Frame Bright chrome plated steel tube, diameter 25 mm (1"), thickness 3 mm (⅛"). Four glides in black-grey polyamide are standard (for soft floors); optionally in black-grey polyurethane (for hard floors), on request with additional felt insert.
Model 249 / 7 Die-cast aluminium, high-lustre polished, four-star base with rigid column and steel, bright chrome plated seat bearer. Black multi- purpose plastic glides for all types of flooring. Upholstery Steel frame in square tube with tension springs embedded in polyurethane foam. Exchangeable, one-piece cover with side facings in high-quality woollen fabric or leather. Armrests (only model 249 / 5) Armrests with contacts in plywood with fully upholstered pads to match the seat or with walnut face veneer, stained and protected with open-pore lacquer. Stool Frame Die-cast aluminium, high-lustre polished, star base with rigid column and steel, bright chrome plated seat bearer. Black, multi-purpose plastic glides for all types of flooring. Seat Shaped plywood shell with seating cushion, fully covered.
Core material of table top Particle board, depending on the surface finish with straight, colourmatched plastic lipping or straight, colour-matched wood lipping. Table top group 1 – laminate Table top thickness 20 mm (¾") Laminate according to Wilkhahn laminate colour samples (white, light grey or dark grey) with plastic lipping in the same colour as the table top.
When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Standards The Cura chairs and stools comply with the DIN EN 13761 office chair standard and DIN EN 1728.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Table top group 2 – veneer Table top thickness 20 mm (¾") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Veneer version As a standard, veneers are slip matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple, beech veneer. Some specific growth features possible.
39
Upholstery material 60 74 87 63 66 67
Cura Chairs
Cantilever chair ¡ 35 ¶ 75 ¢ 70 | 71 (¡ 13¾" ¶ 29½" ¢ 27½" | 28")
249/5 Armrest pads in walnut Frame bright chrome plated Additional charge Armrests fully upholstered to match the seat covers
Chairs ¡ 35 ¶ 75 ¢ 59 | 71 (¡ 13¾" ¶ 29½" ¢ 23¼" | 28")
249/7 High-lustre polished frame
Stool
249/8 60 x 50, H 41 (23⅝" x 19⅝", H 16⅛") High-lustre polished frame
€
€
€
1387
1675
1951
82
158
196
1160
1448
1724
687
825
956
Low tables
Veneer variation
Low table
Veneer variation
Low table
Table top group 1 2
Laminate
1
€
€
€
249/1 54 x 54, H 36 (21¼" x 21¼", H 14⅛") Frame bright chrome plated
490
739
768
249/3 60 x 150, H 36 (23⅝" x 59", H 14⅛") Frame bright chrome plated
617
901
970
All cantilever chairs, armchairs and tables are fitted with four glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Stool with multi-purpose glides.
40
26 range Modus Basic
Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg
Technical details Function Task chairs with backrest shell and automatic synchro-adjustment: the seat and backrest angle adjusts automatically to position of the person sitting on chair. When leaning back, the backrest tension increases proportionately. The person sitting on the chair adjust the tension infinitely. The chair can be locked in the front position by engaging a lever. Gas lift compliant with DIN 4550 for infinite seating height adjustment.
Frame
Backrest
Task chairs Five-star, die-cast aluminium star base, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, compliant with DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft cover for hard floors. Anti-static castors on request. Die-cast aluminium swing plates, coated in the same colour to match the star base, polished or bright chrome plated. Black-coated steel sheet shell for the technology.
Task chairs Backrest shell in black throughdyed, viscoelastic polypropylene with exchangeable back cushion in covered, cut foam. On request, with integral, adjustable lumbar support. Armrests Task chairs Armrests in black, glass-fibre-reinforced polyamide. Task chair model 263/7 optionally with height adjustable armrests in the same material.
Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover.
Frame versions
Small components
Standards Modus Basic task chairs conform to the Office Chair Standard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category B of the Office Chair Standard DIN EN 1335.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Task chairs
Star base and swing arms
51 52 53 60
Bright chrome plated Aluminium polished Coated black Coated, silver satin finish
Castors, glides, frame components, adjustment levers 41
Black
41
Upholstery material 54 60 74 62 63 66 67 69
Modus Basic Task chairs
Standard height backrest ¡ 42/53 ¶ 91/102 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 25¼" | 24")
€
€
€
263/7 With seat and back cushion, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated
941
984
1365
Additional charge/reduced prices Frame aluminium polished Frame aluminium bright chrome plated Height adjustable armrests Height-adjustable lumbar support Anti-static castors Without armrests
43 119 106 59 40 – 86
43 119 106 59 40 – 86
43 119 106 59 40 – 86
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors.
42
27 range Modus Compact
Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg
Technical details Function Task chairs with frame covering and automatic synchro-adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward position lockable by engaging lever. Gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height. Conference chairs / visitor chairs, swivel, with automatic synchro- adjustment, without front locking position, with fixed seat height, alternatively also available in a four-legged version or in a cantilever version, optionally stackable. Frame Task, conference and visitor chairs Die-cast aluminium star base, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swivel plates, coated to match the star base, polished or bright chrome plated. Synchro-mechanism case in sheet steel, coated black. Frame versions
Small components
Accessories
Visitor chair, four-legged: Legs in oval aluminium tube, bright chrome plated, clear anodized or coated. Black polyamide glides as the standard version for carpeted floors, or in black polyurethane for hard floors, optionally with additional felt insert. Cantilever chairs Steel tube frame, bright chrome plated, matt chrome plated or coated, with anti-tilt stoppers as the standard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert. The stackable version is available with a bright chrome plated frame only. Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover. Backrests Task, conference and visitor chairs Frame in black, glass fibre-reinforced polyamide. Exchangeable frame covering in black polyamide fabric, non-transparent or trans parent. Non-transparent material optionally covered on the front and with cut foam underlay. Standard and medium-height backrest with a crescent shaped grip covered in black embossed leather for fabric cover; in the same
colour leather for leather cover. High backrest with a shoulder support with a forward curvature, covered in embossed leather for fabric cover; in the same colour leather for leather cover. Backrests of task chairs 273, 274 and 275 optionally with integral, adjustable lumbar support (not possible for version with transparent material). Cantilever chairs Frame in steel tube, bright chrome plated, matt chrome plated or coated. Exchangeable frame covering in black polyamide fabric, non-transparent or transparent. Non-transparent material optionally covered on the front and with cut foam underlay. Cantilever chairs 277/7 and 279/7 with a crescent shaped grip in black polypropylene; version with semi transparent material with a crescent shaped grip covered in black embossed leather for fabric or leather cover. Covered backrest with crescent shaped grip in black embossed leather for fabric cover; in the same colour leather for leather cover. Armrests Task, conference and visitor chairs Armrests in black, glass fibre-reinforced polyamide, optionally height adjustable.
Cantilever chairs Armrest pads in black polypropylene or laminated beech, natural finish. Standards Modus Compact task chairs and conference chairs / visitor chairs conform to the Office Chair Stand ard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category B of the Office Chair Standard DIN EN 1335. Modus cantilever chairs and four-legged visitor chairs conform to DIN EN 16139 - L1 and ANSI / BIFMA X 5.1.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Visitor chairs, four-legged Armrests in black, glass fibre- reinforced polypropylene.
Task chairs 51 52 53 60
tar base, swing plates S Bright chrome plated Aluminium polished Coated black Coated, silver satin finish
Visitor chairs 51 53 60 62
Oval aluminium tube frame Bright chrome plated Coated black Coated, silver satin finish Clear anodized
Cantilever chair 51 53 60
Round steel tube frame Bright chrome plated Coated black Coated, silver satin finish
Castors, glides, frame components, adjustment levers 41
Black
277 Four-wheeled trolley
for 6 stackable cantilever chairs
€ 538
43
Upholstery material 54 60 74 62 63 66 67 69
Modus Compact Task chairs
Standard height backrest ¡ 42/53 ¶ 91/102 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 25¼" | 24")
273/7 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charges Backrest upholstered on the front Backrest covered on outer side
Medium-height backrest ¡ 42/53 ¶ 98/109 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 38⅝"/42⅞" ¢ 25¼" | 24")
275/7 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charges Backrest upholstered on the front Backrest covered on outer side
High backrest ¡ 42/53 ¶ 106/117 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 41¾"/46⅛" ¢ 25¼" | 24")
274/7 With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium coated Additional charges Backrest upholstered on the front Backrest covered on outer side
€
€
€
1101
1131
1383
43 75
59 88
209 235
1146
1176
1428
75 75
88 88
252 235
1363
1393
1645
75 75
88 88
252 235
€ Additional charges/reduced prices specific to range
Frame aluminium polished Frame aluminium bright chrome plated
43 119
Height adjustable armrests Transparent material (without additional charge) Height-adjustable lumbar support Anti-static castors
106 – 59 40
Without armrests
– 86
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support.
44
Upholstery material 54 60 74 62 63 66 67 69
Modus Compact Conference/visitor chairs
Standard height backrest ¡ 46 ¶ 95 ¢ 64 | 61 (¡ 18⅛" ¶ 37⅜" ¢ 25¼" | 24")
Medium-height backrest ¡ 46 ¶ 102 ¢ 64 | 61 (¡ 18⅛" ¶ 40⅛" ¢ 25¼" | 24")
Standard height backrest ¡ 43 ¶ 88 ¢ 57 | 56 (¡ 16⅞" ¶ 34⅝" ¢ 22½" | 22")
€
€
€
271/7 Swivel-mounted, With seat cushion, Backrest with non-transparent material, With armrests, Automatic synchro-adjustment, tension control Frame aluminium coated
1017
1047
1299
Additional charge/reduced prices Frame aluminium polished Frame aluminium bright chrome plated Transparent material (without additional charge) Backrest upholstered on the front Backrest covered on outer side Without armrests
43 119 – 43 75 – 86
43 119 – 59 88 – 86
43 119 – 209 235 – 86
272/7 Swivel-mounted, With seat cushion, Backrest with non-transparent material, With armrests, Automatic synchro-adjustment, tension control Frame aluminium coated
1062
1092
1344
Additional charges Frame aluminium polished Frame aluminium bright chrome plated Transparent material (without additional charge) Backrest upholstered on the front Backrest covered on outer side
43 119 – 75 75
43 119 – 88 88
43 119 – 252 235
276/7 Backrest with non-transparent stretch material Frame aluminium coated
755
785
1037
Additional charges Frame aluminium clear anodized Frame aluminium bright chrome plated Transparent material Backrest upholstered on the front Backrest covered on outer side
43 131 30 43 75
43 131 30 59 88
43 131 30 209 235
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Semi-transparent backrest not available in combination with back cushion.
45
Upholstery material 54 60 74 62 63 66 67 69
Modus Compact Cantilever chairs
Standard height backrest ¡ 43 ¶ 85 ¢ 57 | 56 (¡ 16⅞" ¶ 33½" ¢ 22½" | 22")
277/7 Backrest with non-transparent material, Polypropylene armrests Frame coated Additional charges Backrest upholstered on the front Backrest covered on outer side
Medium-height backrest ¡ 43 ¶ 92 ¢ 57 | 56 (¡ 16⅞" ¶ 36¼" ¢ 22½" | 22")
279/7 Backrest with non-transparent material, Polypropylene armrests Frame coated Additional charges Backrest upholstered on the front Backrest covered on outer side
€
€
€
651
681
933
43 75
59 88
209 235
695
725
977
75 75
88 88
252 235
€ Additional charges/reduced prices specific to range
Frame bright chrome plated Frame matt chrome plated Armrests with embossed leather pad (cannot be offered on stackable version) Wooden armrests Transparent material Stackable version (in combination with frame bright chrome plated only, stackable 5‑high free-standing)
30 88 164 90 30 71
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in combination with back cushion.
46
28 range Modus Medium
Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg
Technical details Function Task chairs with backrest with stretch material and automatic synchro-adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward position lockable by engaging lever. Gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height. Swivel-mounted conference / visitor chairs with automatic synchro adjustment and infinitely variable height adjustment, optionally with rigid, four-arm seat bearer; alternatively also as a cantilever version. Frame Task chairs Die-cast aluminium star base, coated, polished or bright chrome plated. Conference/visitor chairs with four-star base in die-cast aluminium, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, conforming to DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft lining for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swing plates, coated to match the star base, polished or bright chrome plated. Synchro-mechanism case in sheet steel, coated black.
Frame versions
Small components
Conference chairs / visitor chairs Model 281/5 with four‑arm seat bearer in die-cast aluminium, coated in the same colour, polished or bright chrome plated to match star base. Cantilever chairs Steel tube frame, bright chrome plated, matt chrome plated or coated, with anti-tilt stoppers as the standard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert. Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the same colour for leather cover. Backrests Task and conference chairs Frame in black, glass fibre-reinforced polyamide. Exchangeable frame covering in black polyamide material, non-transparent or transparent, non-transparent version with underpadding. Non-trans parent material optionally additionally covered on the front and with cut foam underlay. Standard backrest with a crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover. High backrest with a shoulder support with a forward curvature, covered in embossed leather for fabric cover; in the same colour leather for leather cover. Task chairs optionally available with height-adjustable lumbar support.
Cantilever chairs Steel tube frame, bright chrome plated, matt chrome plated or colour coated. Exchangeable frame covering in black polyamide material, nontransparent or transparent. Nontransparent material optionally covered on the front and with cut foam underlay. Crescent shaped grip covered in black embossed leather for fabric cover; in the same colour leather for leather cover.
Standards Modus Medium task chairs and conference chairs / visitor chairs conform to the Office Chair Standard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category C of the Office Chair Standard DIN EN 1335. Modus cantilever chairs conform to DIN EN 16139 - L1 and ANSI / BIFMA X 5.1.
Armrests Task and visitor chairs Armrests in black, textured, glass fibre-reinforced polyamide. On request, with black, embossed leather pad for fabric cover; in the same colour leather for leather cover. On request, with armrests in die-cast aluminium, aluminium polished or bright chrome plated with black leather pad for fabric cover; in the same colour leather for leather cover. Cantilever chairs Armrest pads in laminated beech, natural finish, optionally in poly propylene with black, embossed leather pad for fabric cover; in the same colour leather for leather cover.
Task chair and visitor chair
Star base, swing plates
51 52 53 60
Bright chrome plated Aluminium polished Coated black Coated, silver satin finish
Cantilever chair
Round steel tube frame
51 53 60
Bright chrome plated Coated black Coated, silver satin finish
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Castors, glides, frame components, adjustment levers 41
Black
47
Upholstery material 54 60 74 62 63 66 67 69
Modus Medium Task chairs
Standard height backrest ¡ 42/53 ¶ 91/102 ¢ 68 | 63 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 26¾" | 24¾")
283/7 With seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Frame aluminium coated Additional charges Backrest upholstered on the front Backrest covered on outer side
High backrest ¡ 42/53 ¶ 112/123 ¢ 68 | 63 (¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 24¾")
284/7 With seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Frame aluminium coated Additional charges Backrest upholstered on the front Backrest covered on outer side
€
€
€
1623
1653
1931
186 74
205 87
494 233
1945
1975
2253
217 74
231 87
641 233
€ Additional charges/reduced prices specific to range
Frame aluminium polished Frame aluminium bright chrome plated
43 119
Transparent material Armrests with embossed leather pad Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Lumbar support for task chairs Anti-static castors
30 190
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support.
48
250 334 59 40
Upholstery material 54 60 74 62 63 66 67 69
Modus Medium Conference/visitor chairs
Standard height backrest ¡ 45 ¶ 94 ¢ 61 | 59 (¡ 17¾" ¶ 37" ¢ 24" | 23¼")
Standard height backrest ¡ 45/56 ¶ 94/105 ¢ 61 | 59 (¡ 17¾"/22" ¶ 37"/41⅜" ¢ 24" | 23¼")
€
€
€
281/5 Swivel-mounted, with rigid seat bearer, With seat cushion, Backrest with non-transparent material, Armrests polyamide Frame aluminium coated
1117
1147
1425
Additional charges Frame aluminium polished Frame aluminium bright chrome plated Backrest upholstered on the front Backrest covered on outer side
43 205 186 74
43 205 205 87
43 205 494 233
1540
1570
1848
43 119 186 74
43 119 205 87
43 119 494 233
281/6 Swivel-mounted, with seat cushion, Backrest with non-transparent material, Armrests polyamide, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Frame aluminium coated Additional charges Frame aluminium polished Frame aluminium bright chrome plated Backrest upholstered on the front Backrest covered on outer side
€ Additional charges/reduced prices specific to range
Transparent material Armrests with embossed leather pad Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated)
30 189 250 334
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in combination with back cushion.
49
Upholstery material 54 60 74 62 63 66 67 69
Modus Medium Cantilever chairs
Standard height backrest ¡ 43 ¶ 91 ¢ 65 | 56 (¡ 16⅞" ¶ 35⅞" ¢ 25⅝" | 22")
€
€
€
287/7 With seat cushion, Backrest with non-transparent material, Armrests laminated beech Frame coated
893
923
1201
Additional charges Frame bright chrome plated Frame matt chrome plated Backrest upholstered on the front Backrest covered on outer side Armrests with embossed leather pad Transparent material
30 87 186 74 105 30
30 87 205 87 105 30
30 87 494 233 105 30
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
50
28 range Modus Executive
Design: Klaus Franck, Werner Sauer and wiege, Fritz Frenkler, Justus Kolberg
Technical details Function Task chairs with luxurious backrest cushion and automatic synchro- adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When leaning back, the backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward position lockable by engaging lever. Gas lift, conforming to DIN 4550, for infinitely variable adjustment of seat height. Swivel-mounted conference / visitor chairs with automatic synchro-adjustment and infinitely variable height adjustment, optionally with rigid, four-arm seat bearer; alternatively also as a cantilever version.
Frame
Backrests
Task chairs Die-cast aluminium five‑star base, coated, polished or bright chrome plated. Conference / visitor chairs with fourstar base in die-cast aluminium, coated, polished or bright chrome plated. Twin wheel swivel castors in black polyamide with load-dependent braking, compliant with DIN EN 12529, as the standard version for carpeted floors, or with a grey polyurethane soft cover for hard floors. Anti-static castors on request. Glides in black polyamide as the standard version for carpeted floors, or in black polyurethane for hard floors. Die-cast aluminium swing plates, polished or bright chrome plated to match the star base. Sheet steel, black-coated synchro technology shell. Conference and visitor chair model 281/91 with four-arm seat bearer in die-cast aluminium, polished or bright chrome plated to match four-star base.
Task chairs and visitor chairs Frame in black, glass fibre-rein forced polyamide. Exchangeable frame covering in black polyamide material, with slim leather-covered cushion on seat and backrest. On request, outer side of backrest frame with cover. Standard height backrest with a straight edge. High backrest with shoulder support with a forward curvature, with slim, leather-covered cushion.
Cantilever chairs Frame in round steel tube, bright chrome plated or matt chrome plated, with anti-tilt stoppers as the standard version for carpeted floors: with additional glides for hard floors, optionally with additional felt insert. Seat Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam with exchangeable cover. Side facing in embossed leather in the same colour for leather cover.
Frame versions
Small components
Cantilever chairs Steel tube frame, bright chrome plated or matt chrome plated to match frame. Exchangeable frame covering in black polyamide material, with slim leather-covered cushion on seat and backrest. On request, outer side of backrest frame with leather cover. Backrest with a straight edge.
Cantilever chairs Armrest pads covered in the same colour leather. Standards Modus Executive task chairs and conference chairs / visitor chairs conform to the Office Chair Stand ard DIN EN 1335, ANSI / BIFMA X 5.1, BS 5459 and other international office chair standards. They meet the requirements of category C of the Office Chair Standard DIN EN 1335. Modus Executive cantilever chairs conform to DIN EN 16139 - L1 and ANSI / BIFMA X 5.1.
Armrests Task chairs Armrests in black, textured, glass fibre-reinforced polyamide, with additional embossed leather pad in the same colour leather. Optionally, with armrests in diecast aluminium, aluminium polished or bright chrome plated with leather pad and triple-sewn seam in the same colour leather.
Please note: The prices for types with cushioning leather provided by the customer are given on request.
Conference / visitor chairs Armrests in die-cast aluminium, aluminium polished or bright chrome plated, with leather pad and triple-sewn seam in the same colour leather.
Task chair and visitor chair
Star base, swing plates
51 52
Bright chrome plated Aluminium polished
Cantilever chair
Round steel tube frame
51 58
Bright chrome plated Matt chrome plated
Castors, glides, frame components, adjustment levers 41
Black
51
Upholstery material 74 87
Modus Executive Task chairs
Standard height backrest ¡ 42/53 ¶ 91/102 ¢ 68 | 65 (¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 26¾" | 25⅝")
283/81 Seat and backrest with slim, leather-covered cushion, Armrests polyamide with embossed leather pad, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium polished Additional charge Backrest covered on outer side
High backrest ¡ 42/53 ¶ 112/123 ¢ 68 | 65 (¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 25⅝")
284/81 Seat and backrest with slim, leather-covered cushion, Armrests polyamide with embossed leather pad, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control Frame aluminium polished Additional charge Backrest covered on outer side
€
€
2819
2988
233
297
3511
3724
233
297
€ Additional charges/reduced prices specific to range
Frame aluminium bright chrome plated Armrests aluminium polished with leather pad (in combination with frame aluminium polished) Armrests aluminium bright chrome plated with leather pad (in combination with frame bright chrome plated) Anti-static castors
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge). Additional charge for anti-static castors.
52
75 62 152 40
Upholstery material 74 87
Modus Executive Conference/visitor chairs
Standard height backrest ¡ 45 ¶ 95 ¢ 61 | 59 (¡ 17¾" ¶ 37⅜" ¢ 24" | 23¼")
281/91 Swivel-mounted, with rigid seat bearer, Seat and backrest with slim, leather-covered cushion Armrests aluminium polished with leather pad, Frame aluminium polished Additional charges Armrests bright chrome plated with leather pad, Frame aluminium bright chrome plated Backrest covered on outer side
Standard height backrest ¡ 45/56 ¶ 95/106 ¢ 61 | 59 (¡ 17¾"/22" ¶ 37⅜"/41¾" ¢ 24" | 23¼")
281/93 Swivel-mounted, Seat and backrest with slim, leather-covered cushion, Automatic synchro-adjustment, tension control, Infinitely variable height adjustment Armrests aluminium polished with leather pad, Frame aluminium polished Additional charges Armrests bright chrome plated with leather pad, Frame aluminium bright chrome plated Backrest covered on outer side
€
€
2450
2620
252 233
252 297
2878
3048
168 233
168 297
All conference and visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
53
Upholstery material 74 87
Modus Executive Cantilever chairs
Standard height backrest ¡ 43 ¶ 91 ¢ 65 | 61 (¡ 16⅞" ¶ 35⅞" ¢ 25⅝" | 24")
287/81 Seat and backrest with slim, leather-covered cushion, Armrests leather-covered Frame bright chrome plated Additional charges Frame matt chrome plated Backrest covered on outer side
€
€
2230
2399
87 233
87 297
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
54
290 range Sola
Design: Justus Kolberg Licensor for products and sales: Davis Furniture, NC, US
Technical details Function The conference chair fuses innovative comfort with crisp design and a classy appeal. The chair’s defined by the linear shape of the seat shell and the linear aluminium frame which branches out from the centre column into a V-shaped support that culminates in the armrests. The slender seat shell is swivel-mounted at the front and connected with a V-shaped support by two pressure springs at the back. As a result, the chair rocks backwards and forwards comfortably without any extra mechanical parts required. The sprung pressure can easily be adjusted to suit personal levels of comfort and body weight. DIN 1335-1 compliant gas lift for infinite adjustment of the seat height. Areas used: Traditional conference and meeting rooms, executive offices and boards, high-quality restaurants or prestigious dining areas.
Frame Die-cast aluminium five-star base, high-lustre polished and coated matt black or silver satin. Round, black, polyamide multi-purpose glides for all types of flooring. For wooding floorings (e.g. parquet) please order with extra felt. Optionally with castors. Twin wheel swivel castors with load-dependent braking, made of black polyamide compliant with DIN EN 12529 as the standard version for carpets; with grey soft polyurethane facing for hard floors. These castors change the seating height and adjustment range to 45 – 51 cm. The gas lift is covered by bright chromeplated protective tube, coated matt black or in a silver satin finish. When the star base is aluminium high-lustre polished, the protective tube is bright chrome-plated. Vshaped die-cast aluminium support, high-lustre polished like the star base, coated matt black or in silver satin. Lever for adjusting the seating height, coated matt black or in silver satin. When the star base is aluminium high-lustre polished, the lever is bright chrome-plated.
Frame versions 60 72 80
Seat and back Unitary seat and back shell made of moulded plywood and covered on the rear. Liner made of padded cut foam. Management grade upholstery also with facing all the way round and with quilted stitching.
Standards The Sola conference chair complies with DIN EN 16139-L1 and ANSI BIFMA X 5.1 Testing is currently being carried out to obtain the GS mark.
Armrests Die-cast aluminium armrests the same as the shell, optionally with additional plastic armrest pad. Chairs with management grade upholstery also come with optional leather-covered armrest pads which are only available in the same colour and in combination with leather 87.
Star base, V‑shaped support, armrests
Protective tube, lever for gas lift
Coated, silver satin finish Aluminium high-lustre polished Black matt coating
Coated, silver satin finish Bright chrome plated Black matt coating
55
Sola Conference chair
60 62 67 69
€ Medium-height backrest ¡ 44/53 ¶ 101/110 ¢ 67 | 68 (¡ 17⅜"/20⅞" ¶ 39¾"/43¼" ¢ 26⅜" | 26¾")
291/7 One-piece seat and back shell, fully upholstered, With armrests, Infinitely variable height adjustment Frame aluminium coated Additional charge Plastic armrest pad
Medium-height backrest ¡ 44/53 ¶ 101/110 ¢ 67 | 68 (¡ 17⅜"/20⅞" ¶ 39¾"/43¼" ¢ 26⅜" | 26¾")
€
€
€
1302
1302
1589
€
42
291/71 Seat and back with management grade upholstery, With armrests, Infinitely variable height adjustment Frame aluminium coated Additional charges Plastic armrest pad Leather-covered armrest pad
Upholstery material 63 74 87 66
1398 42
1717
2066
116
€ Additional charges/reduced prices specific to range
56
Frame aluminium high-lustre polished Castors
42 40
30 range Graph
Design: jehs + laub
Technical details Function Formal and distinctive, high-end conference chair in two backrest heights. Armrests stylishly link the seat and backrest. A high level of sprung (and at the sides also elastic) comfort due to three-point support with rear spring strut and sophisticated upholstery. Can be used in traditional conference and meeting rooms, executive offices and boards, high-quality restaurants or prestigious dining areas.
Frame Four-star base in die-cast aluminium, coated black or signal white, polished or bright chrome plated. Black, multi-purpose glides made of plastic for all types of flooring. Optionally with base glides with larger contact area for sensitive floorings, either to match the star base coated black or signal white , matt chrome-plated (matt polished star base) or bright chrome plated (bright chrome-plated star base). Black polyamide glides for carpets. For hard floors (e.g. stone), please order with soft TPU, for wooden floors (e.g. parquet) with additional felt. These glides change the seating height to 44 cm. Optionally with castors for 4-star bases compliant with DIN EN 1335 and ANSI BIFMA X 5.1 for conference chairs. Load-dependent braking, twin wheel swivel castors made of black polyamide compliant with DIN EN 12529, with black polyurethane coating for both hard and soft floors. Castors with black plastic shell, either with chrome plated ring (coated star base), matt chrome plated ring (star base matt polished) or chrome plated ring (star base bright chrome plated). These glides change the seating height to 45 cm. Swivel-mounted columns with diecast aluminium Y-shaped seat support, coated black or signal white, matt polished or bright chrome plated to match the star base. Permanently elastic, rubber/metal connecting elements. Sprung elastic strut made of top-quality spring steel in black.
Seat and back Seat and back frame made of metal, with wave springs, additional cushioning and fully padded with polyurethane.
Frame versions
49 51 53 79
Small components
Castors 49, 53 black plastic shell with chrome plated ring 52 51
Armrests Armrests that connect the seat and back made of die-cast aluminium and to match the frame black or white coated, matt polished or bright chrome plated. Standards The Graph chairs comply with the DIN EN 13761, DIN EN 1728 and ANSI/BIFMA X 5.1 standards.
Please note The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Coated signal white bright chrome plated aluminium Coated black Matt polished aluminium
black plastic shell with matt chrome plated ring black plastic shell with chrome plated ring
Base glide colour matched black or white coated Matt chrome plated Bright chrome plated
57
Upholstery material 60 74 87 63 66 67
Graph Conference chair
Medium-height backrest ¡ 43 ¶ 102 ¢ 62 | 64 (¡ 16⅞" ¶ 40⅛" ¢ 24⅜" | 25¼")
High backrest ¡ 43 ¶ 125 ¢ 62 | 64 (¡ 16⅞" ¶ 49¼" ¢ 24⅜" | 25¼")
€
€
€
301/5 Swivel-mounted, one-piece seat and back frame, fully upholstered, With armrests Frame aluminium coated
1813
2153
2451
302/5 Swivel-mounted, one-piece seat and back frame, fully upholstered, With armrests Frame aluminium coated
2145
2594
2947
€ Additional charges/reduced prices specific to range
58
Swivel-return mechanism Matt polished aluminium frame Frame aluminium bright chrome plated Base glide Castors
105 95 419 46 76
300 range Graph
Design: jehs + laub
Technical details Function A high-quality table system for traditional conference and executive workspaces.
Table tops Medium density fibreboard (MDF) or panel made of single-pane reinforced glass.
Frame Table legs made of bright chromeplated aluminium, matt polished chrome, or coated in black, or signal white. Table crossbeams/underframes made of aluminium-extruded profile, colour matched with the table legs (exception: model 300/50, reinforcement underframes on the inside always black). Table top bearers to connect the table top made of black-coated steel, except when the frame is coated white the table top bearer is coated white. Adjustable table glides (10 mm) made of steel, glide cover made of die-cast zinc, surface the same as the frame, with glide insert made of polyamide for soft floorings and polyurethane for hard floorings or with felt insert.
Table top group 2 – veneer Table top thickness 26 mm Variation 1: Veneers made of beech, oak or ash according to Wilkhahn woodstain colour samples with colourmatched and symmetrically curved table edge, protected with colourless natural wood varnish. Variation 2: Veneers made of oak, walnut or elm, as well as Wilkhahn mocca veneer with colour-matched or symmetrically curved table edge, protected with colourless natural wood varnish. Table top group 6 – varnished Table top thickness 25 mm Table top 25 mm thick, white or black varnish-coated, with colourmatched and symmetrically curved table edge. Table top group 11 – glass Table top 29 mm thick, consisting of MDF core panel (19 mm) with chamfered edge and single-pane reinforced glass (10 mm) optionally coated opaque black or white on the bottom. MDF core panel the same colour as the glass panel.
Accessories Cable channel Cable channel made of aluminium extruded profile, retractable, coated black.
Standards The Graph tables comply with the DIN EN DIN EN 527 and ANSI / BIFMA X 5.5 standards.
Opening lengthways or crossways Portal opening lengthways, bevelled on both of the long sides (can be used on both sides), gas-lift damped automatic opening mechanism, portal in the same colour and material as the surface of the table. Single table portal: 300 x 165 mm (11¾" x 6½") Portal opening sideways, bevelled on one long side (can be used from one side), gas-lift damped automatic opening mechanism, portal in the same colour and material as the surface of the table. Single table portal: 300 x 165 mm (11¾" x 6½") Single portal basic Aluminium installation frame with portal and brushed profile. Single table portal: 280 x 120 mm Vertical cable management Flexible black cable sheath. Length including table attachment and floor panel approx. 75 cm.
Edge profiles symmetrically curved (table top group 2 and 6)
Table top group 11
Frame versions
Legs, crossbeams, underframes
Table top bearers
49
Coated signal white
Coated signal white
51
bright chrome plated aluminium
Coated black
53
Coated black
Coated black
76
Chrome, matt-polished
Coated black €
Accessories
Socket strip with insertion platesand strain anchor*, with 4 modules, 3 x power supply modules, 1 x data module 300/04 Socket strip with insertion plates and strain anchor*, with 4 modules, 2 x power supply modules, 1 x data module,1 x HDMI connector 300/051 Vertical cable management 300/06 Strain anchor for cable channel with insertion plate* (2 items) 300/03
286 601 154 41
* incl. fastening material
59
Additional charges Cable channel 300/01 1 single table portal opening lengthways 300/05 1 single table portal basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
300/00 130 x 280, H 73 (51⅛" x 110¼", H 28¾") for 8 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Additional charges Cable channel 300/01 2 single table portals opening lengthways 300/05 2 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
Glass
300/00 120 x 240, H 73 (47¼" x 94½", H 28¾") for 6 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
Table top group 2 11 Veneer variation 2
Additional charges Cable channel 300/01 1 single table portal opening lengthways 300/05 1 single table portal basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
2 Veneer variation 1
300/00 120 x 200, H 73 (47¼" x 78¾", H 28¾") for 6 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
6 varnished
Graph Tables
€
€
€
€
3617 4622 4925
3749 4754 5057
3844 4849 5152
4258 5263 5566
411 1049 124
411 1107 124
411 1196 124
– – –
3731 4771 5111
3878 4918 5258
3991 5031 5371
4884 5924 6264
424 1049 124
424 1107 124
424 1196 124
– – –
4094 5237 5659
4256 5399 5821
4398 5541 5963
5195 6338 6760
489 2098 248
489 2214 248
489 2392 248
– – –
– not available
When ordering state the national standard.
60
Additional charges Cable channel 300/01 4 single table portals opening lengthways 300/05 4 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
Glass
300/10 150 x 540, H 73 (59" x 212⅝", H 28¾") for 14 persons, consisting of 2 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
Table top group 2 11 Veneer variation 2
Additional charges Cable channel 300/01 2 single table portals opening lengthways 300/05 2 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
2 Veneer variation 1
300/10 150 x 380, H 73 (59" x 149⅝", H 28¾") for 10 persons, consisting of 2 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
6 varnished
Graph Tables
€
€
€
€
6554 8274 8885
6809 8529 9140
7050 8770 9381
8172 9892 10503
898 2098 248
898 2214 248
898 2392 248
– – –
7699 8036 9689 10026 10509 10846
8377 10367 11187
9398 11388 12208
1033 4784 496
– – –
1033 4196 496
1033 4428 496
– not available
When ordering state the national standard.
61
Glass
Table top group 2 11 Veneer variation 2
Additional charges Cable channel 300/02 8 singletable portals opening sideways 300/05 8 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
2 Veneer variation 1
300/20 230 x 540, H 73 (90½" x 212⅝", H 28¾") for 16 persons, consisting of 4 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
6 varnished
Graph Tables
€
€
€
€
12002 14535 15517
12441 14974 15956
12959 15492 16474
15938 18471 19453
3551 8544 992
3551 9008 992
3551 9728 992
– – –
– not available
When ordering state the national standard.
62
Glass
Table top group 2 11 Veneer variation 2
2 Veneer variation 1
6 varnished
Graph Tables
€
€
€
€
300/30 Ø 125, H 73 (Ø 49¼", H 28¾") for 4 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
3092 4022 4267
3234 4164 4409
3295 4225 4470
3398 4328 4573
300/30 Ø 150, H 73 (Ø 59", H 28¾") for 4 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
3344 4319 4612
3517 4492 4785
3605 4580 4873
3964 4939 5232
300/40 Ø 210, H 73 (Ø 82⅝", H 28¾") for 8 persons, consisting of 2 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
5038 6089 6342
5247 6298 6551
5398 6449 6702
6299 7350 7603
1374 2136 248
1374 2252 248
1374 2432 248
– – –
8364 9595 10047
8729 9960 10412
9070 10301 10753
11493 12724 13176
2659 4272 496
2659 4504 496
2659 4864 496
– – –
Additional charges Cable channel 300/02 2 singletable portals opening sideways 300/05 2 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
300/50 Ø 300, H 73 (Ø 118⅛", H 28¾") for 12 persons, consisting of 4 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Additional charges Cable channel 300/02 4 singletable portals opening sideways 300/05 4 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
– not available
When ordering state the national standard.
63
Glass
Table top group 2 11 Veneer variation 2
2 Veneer variation 1
6 varnished
Graph Tables
€
€
€
€
300/30 120 x 120, H 73 (47¼" x 47¼", H 28¾") for 4 persons Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
3230 4189 4461
3341 4300 4572
3399 4358 4630
3429 4388 4660
300/40 190 x 190, H 73 (47¾" x 47¾", H 28¾") for 8 persons, consisting of 2 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish
4987 6051 6405
5182 6246 6600
5335 6399 6753
5861 6925 7279
1414 2136 248
1414 2252 248
1414 2432 248
– – –
8698 10037 10629
8970 10309 10901
9299 10638 11230
13747 15086 15678
2818 4272 496
2818 4504 496
2818 4864 496
– – –
Additional charges Cable channel 300/02 2 singletable portals opening sideways 300/05 2 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
300/50 280 x 280, H 73 (110¼" x 110¼", H 28¾") for 12 persons, consisting of 4 segments Frame coated Frame aluminium bright chrome plated Frame with chrome matt-polished finish Additional charges Cable channel 300/02 4 singletable portals opening sideways 300/05 4 single table portals basic *Socket strip, strain anchor, vertical cable management, see accessories on page 59
– not available
When ordering state the national standard.
64
340 range Chassis
Design: Stefan Diez
Technical details Function Four-legged, lightweight multipurpose chair for conference rooms, informal meeting areas, cafeterias, showrooms, lobbies, hotels or dining rooms.
Frame Frame made of three-dimensional, deep-drawn, extremely strong sheet steel, coated in graphite black, cement grey, grey-white, signal white, flame red, brown-green. Black, multi-purpose glides made of plastic for all types of flooring.
Seat and back Unitary seat and backrest shell made of finely grained plastic (model 341/1), or with textile cover (model 341/5), or fully upholstered with cut foam, leather covered, shell covered with leather at the rear (model 341/6).
Standards The Chassis multi-purpose chairs comply with the DIN EN 13761 standard.
Model 341/7 (outdoor design) with extra coating to protect from corrosion. Only in conjunction with a black coated frame and black seat shell.
Only the combinations listed in the following matrix are possible.
Frame colour RAL 9011 Graphite black
Seat and back shell Polyamide
Black
RAL 7023 Cement grey
RAL 9002 Grey-white
Grey
White
Frame colour Seat and back shell Textile cover
RAL 9011 Graphite black
RAL 7023 Cement grey
Anthracite
C1 / 10
Grey-black
C1 / 11
Forest brown
C1 / 12
Beige-grey
C1 / 13
Red
C1 / 14
Grey-beige
C2 / 20
Grey-black
C2 / 21
Black
C2 / 22
Red-beige
C2 / 23
Olive-beige
C2 / 24
Sand
C3 / 30
Black-grey
C3 / 31
Light grey
C3 / 32
Graphite
C3 / 33
Ruby red
C3 / 34
RAL 9002 Grey-white
RAL 9003 Signal white
RAL 3000 Flame red
RAL 6008 Brown-green
65
Upholstery material
Chassis Multi-purpose chair
€ Multi-purpose chair ¡ 42 ¶ 77 ¢ 54 | 58 (¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
341/1 Stackable 4‑high free-standing Frame coated
Multi-purpose chair ¡ 42 ¶ 77 ¢ 54 | 58 (¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
341/5 with textile cover Not stackable Frame coated
Multi-purpose chair ¡ 42 ¶ 77 ¢ 54 | 58 (¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
341/6 leather-covered fully upholstered, Not stackable Frame coated
Outdoor multi-purpose chair ¡ 42 ¶ 77 ¢ 54 | 58 (¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
66
341/7 Stackable 4‑high free-standing Frame coated
C1 C2
C3
74
€
€
€
383
391
273
549
329
361 range Ceno
Design: Läufer + Keichel
Technical details Function Four-legged, stackable upholstered chair for furnishing conference rooms as well as high-quality restaurant and cafeteria environments.
Frame Frame in solid aluminium, bright chrome plated or coated in silver with a satin finish or black. Black, multi-purpose plastic glides for all types of flooring.
Frame versions 51 53 60
Seat and back Seat frame in die-cast aluminium, bright chrome plated or coated in silver with a satin finish or black. Resilient back shell in moulded polyurethane foam around a polypropylene core, reinforced with two hexagonal rods connecting the seat and back. Seat cushion in moulded foam; seat pan in black through-dyed plastic. Back and seat cushion exchangeable, also the unitary, upholstery covers. Two-part, exchangeable cover.
Armrests Armrests in black polyamide.
Frame
Seat frame
Bright chrome plated Coated black Coated, silver satin finish
Bright chrome plated Coated black Coated, silver satin finish
Standards Ceno conference chairs: DIN EN 13761, DIN EN 1022 and ANSI/BIFMA X 5.1
Accessories Optional stainless steel inline connector. Optionally model 361, short inline connector for linking chairs without armrests and chairs with armrests alternately with chairs without armrests or model 362 long inline connector for linking chairs with armrests.
€ Accessories
360 Two-wheeled cart for 8 stackable upholstered chairs 361 Inline connector short for linking chairs without armrests and chairs with armrests alternately with chairs without armrests 362 Inline connector long for linking chairs with armrests 363 Seat numbers magnetic seat numbers 1 set (10 consecutive numbers)
546 35 38 25
67
Ceno Conference chairs
47
54
Upholstery material 60 74 87 63 66 67
€
€
€
€
€
Conference chair ¡ 47 ¶ 80 ¢ 52 | 54 (¡ 18½" ¶ 31½" ¢ 20½" | 21¼")
361/5 With seat and back cushion, Stackable 8‑high free-standing Frame aluminium coated
471
508
539
693
802
Conference chair ¡ 47 ¶ 80 ¢ 58 | 54 (¡ 18½" ¶ 31½" ¢ 22⅞" | 21¼")
361/6 Armrests polyamide With seat and back cushion Frame aluminium coated
579
616
647
801
910
€ Additional charges/reduced prices specific to range
Black multi-purpose plastic glides for all types of flooring.
68
Frame aluminium bright chrome plated
54
440 range Confair
Design: wiege, Fritz Frenkler, Justus Kolberg
Technical details Function Mobile, modular furniture range for multi-functional communication environments with dynamic, self-organized teamwork.
Mobile desk
Server
Frame Polished die-cast aluminium base. Black polyamide castors and glides. Oval aluminium profile column, clear anodized or coated in black or silver satin finish.
Frame Die-cast aluminium base, polished or coated in black or silver satin finish, with four twin wheel swivel castors in black polyamide. Aluminium profile column and cable management cover, clear anodized or coated in the same colour as the base. Black polypropylene handle.
Writing tablet Birch plywood, fixed to column with tilt / fold function. Back and front edge of desk top finished with a raised, black polypropylene lipping. Finishes Desk top group 1 – laminate Top thickness 11 mm (⅜") Laminate according to Wilkhahn colour and surface finish samples. Edging, natural oiled finish. Desk top group 2 – veneer Top thickness 11 mm (⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples.
Top shelf and box brackets Die-cast aluminium, coated black. Top shelf One-piece sheet steel with black textured coating. Box Base: one-piece sheet steel with black textured coating. Birch plywood body and front. Box with drawer Birch plywood body and front. Base: one-piece sheet steel with black textured coating. Solid beech drawer with natural finish, on steel runners. Internal measurements of drawer 37 x 37 cm (145/8" x 145/8"). Lid in one-piece sheet steel with black textured coating.
Veneer version As a standard, veneers are processed by slip-match method onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible.
Body group 1 – laminate Top thickness 12 mm (½") Laminate according to Wilkhahn colour and surface finish samples. Lipping, n atural oiled finish. Body group 2 – veneer Top thickness 12 mm (½") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Please note: Maximum load capacity with even weight distribution: 60 kg in total for server, 20 kg each for top shelves, boxes, and 20 kg for box with drawer – max. 6 kg inside drawer.
Accessories Four-wheeled trolley
€ Accessories
441 Four-wheeled trolley for six mobile desks model 441/1 443 Four-wheeled trolley for six pinboards model 443/1 or six whiteboards model 443/3
538 783
69
Lectern
Pinboard / Whiteboard
Flipchart
Frame Similar to server, but with two twin wheel swivel castors and two glides in black polyamide.
Stand Feet in polished die-cast aluminium. Glides in black polyamide. Frame optionally with four lockable black castors.
Frame Model 442/1 Foldable, three-legged easel in aluminium profile, bright chrome plated, clear anodized or coated in black or silver satin finish. Hinges and glides in black polyamide. Frame optionally with three castors in black, rear castor lockable (with this version, the frame is not foldable). Writing panel made of MDF (Medium-Density Fibreboard) directly coated with melamine resin. Thickness 13 mm (½"), surfaced with laminate (colour 24/89), height-adjustable in three positions; removable. Two pins to hold standard flipchart paper; with black polyamide paper holder. Aluminium profile pentray, clear anodized or coated in the same colour as the frame.
Lectern top Birch plywood, front finished with raised, black polypropylene lipping. Surfaces Group 1 – laminate Top thickness 11 mm (⅜") Laminate according to Wilkhahn colour and surface finish samples. Lipping, natural oiled finish. Group 2 – veneer Top thickness 11 mm (⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible. Front panel Perforated steel in black or silver satin finish. Unperforated upper edge for company logos max. 115 x 426 mm (4½" x 16¾"). Accessories Additional shelf, width 45 cm (17¾"), depth 35 cm (13¾").
70
Frame Aluminium profile sides and braces, clear anodized or coated in silver satin finish or black. Board cover pinboard Double-sided, grey felt covering. With anthracite polyether foam pinstrip. Board cover whiteboard One side covered in grey felt, one side in white enamelled sheet steel, suitable for magnets, can be dry wiped and used as a projection screen. Accessories Four-wheeled trolley Whiteboard starter kit
Additional charge Foot aluminium polished, Column aluminium clear anodized
Flipchart ¶ 180/200 ¢ 75 | 67 (¶ 70⅞"/78¾" ¢ 29½" | 26⅜")
Pinboard/whiteboard ¶ 190 ¢ 125 | 54 (¶ 74¾" ¢ 49¼" | 21¼")
442/1 Foldable, Writing surface, height adjustable Legs and pentray aluminium coated
Veneer variation 2
441/1 Stackable Foot aluminium polished, column aluminium coated
Veneer variation 1
€ Mobile desk ¶ 73 ¢ 48 | 45 (¶ 28¾" ¢ 18⅞" | 17¾")
Laminate
Body group/Table top group 1 2 2
Confair Mobile desk, Flipchart, Pinboard/whiteboard
€
€
€
419
454
499
13
13
13
618
Additional charges Legs and pentray aluminium clear anodized Legs aluminium bright chrome plated, Pentray aluminium, clear anodized Mobile version on castors (frame not foldable)
93 201
443/1 Pinboard, stackable, Both sides covered in grey felt, With pinstrip model 449 Foot sections aluminium polished, Frame aluminium coated
611
Additional charges Foot sections aluminium polished, Frame aluminium clear anodized Version with castors
33 126
443/3 Whiteboard, stackable, One side covered in grey felt, One side in white enamelled sheet steel, suitable for magnets, For use with dry-wipe markers, Suitable as projection surface, With pinstrip model 449 Foot sections aluminium polished, Frame aluminium coated
844
Additional charges Foot sections aluminium polished, Frame aluminium clear anodized Version with castors
33 126
34
449 Pinstrip For pinboard model 443/1 and whiteboard 443/3
17
451 Starter kit For whiteboard model 443/3 comprising: 10 Magnets Ø 30 mm (1⅛") (2 colours), 4 dry-wipe board markers (4 colours), 1 Magnetic pen holder, 1 Magnetic board eraser, 10 Sheets erasing paper, 1 Bottle of board cleaning fluid
93
71
Additional charge Base aluminium polished, column aluminium clear anodized
Veneer variation 2
448/9 With modesty panel, coated Base and column aluminium coated
Veneer variation 1
€ Lectern ¶ 106/115 ¢ 46 | 51 (¶ 41¾"/45¼" ¢ 18⅛" | 20⅛")
Laminate
Body group/Table top group 1 2 2
Confair Lectern, Server catering/interactive conference
€
€
€
1516
1549
1582
61
61
61
276
289
322
1765
1864
1996
61
61
61
448 Shelf For lectern model 448/9, width 45 (17¾"), depth 35 (13¾")
Server catering/interactive conference ¶ 107 ¢ 46 | 59 (¶ 42⅛" ¢ 18⅛" | 23¼")
446/3 1 Box with drawer, 2 Open-top boxes Base and column aluminium coated Additional charge Base aluminium polished, column aluminium clear anodized
Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg for box with drawer, max. 6 kg inside drawer.
72
Confair System components: servers
445/00 Height 96 (37¾") Base and column aluminium coated 446/00 Height 107 (42⅛") Base and column aluminium coated Additional charge Base aluminium polished, column aluminium clear anodized
Veneer variation 1
Veneer variation 2
€ Server frame
Body group 2 2
Laminate
1
€
€
€
490
538 61
Shelf
447/01 45 x 45 (17¾" x 17¾")
230
Shelf
447/02 45 x 91 (17¾" x 35⅞")
292
Box
447/04 Open, 45 x 45 x 10 (17¾" x 17¾" x 3⅞")
308
341
385
Box with drawer
447/07 45 x 45 x 11 (17¾" x 17¾" x 4⅜")
611
644
688
Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg for box with drawer, max. 6 kg inside drawer.
73
440 range Confair folding table Design: Andreas Störiko
Technical details Function Moveable, collapsible and linkable table range for flexible, dynamic use of conference and communication areas. Just one single step is required to open out or collapse up to three metre long, barrel-shaped or rectangular tables. The tables can also be linked to form conference systems using table-table connectors. Large-sized wheels allow the tables to be transported in buildings and come complete with a locking brake. As a result, minimum cost and effort is required to manage conference spaces. Ideal for multi-purpose conference interiors in high quality design. Alternatively as a wild card in combination with the Logon table range for conference spaces with a variety of partition options, or with Timetable for sophisticated training and seminar spaces.
Frame Die-cast aluminium, bright chromeplated, polished foot section or coated in silver satin finish or black. Aluminium profile uprights and underframe, clear anodised or coated in the same colours as the foot sections. The bright chrome-plated foot sections are coated black. Upright optionally available bright chrome plated. Connecting bar und T-shaped joint coated like the uprights and underframes, with clear anodised uprights and underframes coated in silver satin finish. Connecting rod and T-shaped joint optionally bright chrome-plated. Lockable, black polyamide castors.
Table top group 1 – laminate Thickness 26 mm (1”) Laminate according to Wilkhahn colour and surface finish samples with laminated beech lipping, natural oiled finish. Table top group 2 – veneer Thickness 26 mm (1”) Variation 1: Beech veneer according to Wilkhahn woodstain colour samples with laminated beech lipping or oak, or ash veneer according to Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Veneer types As a standard, veneers are slip-matched method onto the table top. The surfaces are sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer. Closed-pore: maple and beech veneer. Some specific growth features possible.
Table top group 3 – linoleum Table top thickness 27 mm (1⅛"). Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish. Accessories Single table portal Hinged cover in the same colour and material as the table top surface with brush strip for cable exit. Aperture with real wood lipping, as far as possible in the same colour as the table top. Hinge allows 180° opening angle. Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞"). Linoleum on request. Further surfaces for the formats shown in the price list are available on request. Standards The Confair folding tables comply with ANSI / BIFMA X 5.5. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer.
Edge profiles Standard version: Bullnose double with integral, impact-resilient profile Alternatively: Straight with integral, impact-resilient profile
Frame versions
51 52 53 60
74
Foot section
Upright
Connecting bar
Top bearer and underframe
Bright chrome plated Aluminium polished Coated black Coated, silver satin finish
Black coated or bright chrome plated Clear anodized Coated black Coated, silver satin finish
Black coated or bright chrome plated Coated, silver satin finish Coated black Coated, silver satin finish
Coated black Clear anodized Coated black Coated, silver satin finish
Table top group Veneer variation 2
Linoleum
3
Veneer variation 1
Table-table-connectors model 613, metal (2 items) Set price single table portal 300 x 150 mm with cable basket 1 Set price single table portal 300 x 120 mm with cable basket 1 Set price single table portal 300 x 150 mm with storage net 1 Set price single table portal 300 x 120 mm with storage net 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable clips. 2 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, storage net, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable clips. 2
2
€
€
€
4814
5239
5882
5510
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
566
•
•
•
•
96
432
• 938 • 1014 •
• 1148 • 1226 •
• 1148 • 1226 •
• – • – •
107
•
•
•
•
335 104
• •
• •
• •
• •
440/00 With cross veneer, e.g. 110 x 260, H 73 (43¼" x 102⅜", H 28¾"), Folded depth 110 (43¼"), width 56 (22"), height 160 (63") Aluminium coated foot sections, uprights and underframes, coated connecting bar Additional charges/reduced prices specific to range Polished aluminium feet, aluminium clear anodised upright and underframes, silver satin coated connecting bar Bright chrome plated aluminium feet, aluminium black coated upright and frames, black coated connecting bar Bright chrome plated aluminium feet and upright, aluminium black coated underframes, black coated connecting bar Bright chrome plated aluminium feet and upright, aluminium black coated underframes, bright chrome plated connecting bar
2
€
€ Rectangular
1 Laminate
Confair Folding tables
354
Depth Length
90 (35⅜")
100 (39⅜")
105 (41⅜")
110 (43¼")
120 (47¼")
180 (70⅞") 200 (78¾") 210 (82⅝") 220 (86⅝") 240 (94½") 260 (102⅜") 280 (110¼") 300 (118⅛")
4415 4464 4489 4514 4563 4612 4662 4711
5299 4533 5386 5417 4623 4650 4741 4770
5387 5420 4615 5481 5509 5581 5701 –
5461 5477 5502 4696 4785 4814 4934 –
4736 5658 5675 5744 4948 4979 – –
180 (70⅞") 200 (78¾") 210 (82⅝") 220 (86⅝") 240 (94½") 260 (102⅜") 280 (110¼") 300 (118⅛")
4682 4755 4793 4830 4903 4979 5051 5126
5618 4860 5775 5809 4994 5039 5171 5215
5735 5816 4958 5898 5930 6094 6280 –
5812 5885 5915 5054 5195 5239 5424 –
5059 6073 6107 6184 5397 5441 – –
180 (70⅞") 200 (78¾") 210 (82⅝") 220 (86⅝") 240 (94½") 260 (102⅜") 280 (110¼") 300 (118⅛")
5113 5222 5276 5331 5440 5548 5657 5765
6136 5375 6408 6450 5570 5635 5829 5896
6301 6438 5491 6566 6625 6790 7154 –
6400 6515 6556 5608 5745 5882 6156 –
5554 6745 6816 6944 6057 6129 – –
180 (70⅞") 200 (78¾") 210 (82⅝") 220 (86⅝") 240 (94½") 260 (102⅜") 280 (110¼") 300 (118⅛")
4853 4942 4988 5033 5122 5212 5302 5392
5824 5068 6020 6075 5230 5283 5445 5499
5956 6064 5176 6188 6236 6400 6626 –
6041 6152 5915 5283 5450 5510 5737 –
5262 6366 6418 6497 5678 5737 – –
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). 1 For details see page 79. 2 The relevant ITS must be ordered separately (see page 78).
75
Table top group Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm with storage net Set price single table portal 300 x 120 mm with storage net 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, storage net, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable clips. 2
2
€
€
€
4814
5239
5882
5510
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
566
•
•
•
•
432
1014 •
1226 •
1226 •
•
335
•
•
•
•
104
•
•
•
•
440/2 With cross veneer, e.g. 90/110 x 260, H 73 (35⅜"/43¼" x 102⅜", H 28¾"), Folded depth 110 (43¼"), width 56 (22"), height 160 (63") Aluminium coated foot sections, uprights and underframes, coated connecting bar Additional charges/reduced prices specific to range Polished aluminium feet, aluminium clear anodised upright and underframes, silver satin coated connecting bar Bright chrome plated aluminium feet, aluminium black coated upright and frames, black coated connecting bar Bright chrome plated aluminium feet and upright, aluminium black coated underframes, black coated connecting bar Bright chrome plated aluminium feet and upright, aluminium black coated underframes, bright chrome plated connecting bar
2
€
€ Barrel-shaped
1 Laminate
Confair Folding tables
1
Depth
Length 180 (70⅞") 240 (94½") 260 (102⅜") 280 (110¼")
90/110 (35⅜"/43¼") – – 4814 –
90/120 (35⅜"/47¼") 4736 4948 4979 5007
180 (70⅞") 240 (94½") 260 (102⅜") 280 (110¼")
– – 5239 –
5059 5397 5441 5485
180 (70⅞") 240 (94½") 260 (102⅜") 280 (110¼")
– – 5882 –
5554 6057 6129 6200
180 (70⅞") 240 (94½") 260 (102⅜") 280 (110¼")
– – 5510 –
5262 5678 5737 5797
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 79. The relevant ITS must be ordered separately (see page 78).
1 2
76
–
Confair folding table Mounting positions
A1 B1
A3 B3
440/00 Mounting positions for integrated techni-stations Position A1 / A3 with cable channel cover only for 90 – 120 cm table depths Position B1 / B3 with storage net
M1
A1
M1
M3
A3
M3
Position B1 / B3 3 modules from 180 to 300 cm table width 4 modules only from 210 cm table width
440/00 Mounting positions for single table portals Position A1 / A3 with cable basket for 105 – 120 cm table depths Single table portals with identical swing Position M1 / M3 only for Wilkhahn single table portal set with socket strip Single table portals with identical or alternate swing Wilkhahn must check table connector panels provided by the customer
B1 M1
B3 M3
440/2 Mounting positions for integrated techni-stations (barrel-shaped) Position B1 / B3 with storage net Position B1 / B3 3 modules 180 cm table width 4 modules only from 240 cm table width Mounting positions for single table portals Position B1 / B3 with storage net Single table portals with identical or alternate swing Position M1 / M3 only for Wilkhahn single table portal set with socket strip Wilkhahn must check table connector panels provided by the customer
Possible mounting position for cable outlet or integrated techni-station Compact Possible mounting position for integrated techni-station on both sides or single table portals
77
Confair folding table Modules with power supply
Ex-factory price * € Integrated techni-station on both sides (ITS)
701/60 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Integrated opening mechanism at the touch of a button Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
* No discounts for ex-factory prices.
78
701/70 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Integrated opening mechanism at the touch of a button
221 96
396
Additional charge Cable harness covered with black fabric sleeving
96
701/95 3 modules: 1 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port
51
Confair folding table Modules with power supply
€ Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides. Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°. Included in the set prices Cables are routed via the table frame’s upright to the floor. Cable basket to mount under the table top. Mount (metal bracket) for power strips. or storage net and mount (metal bracket)for socket strip.
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle. Included in the set prices Cables are routed via the table frame’s upright to the floor. Cable basket to mount under the table top. Mount (metal bracket) for power strips. or storage net and mount (metal bracket)for socket strip. 708/1 Socket strip 3 Modules: 3 x power supply modules (when ordering state the national standard) 708/2 Socket strip 3 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip 4 Modules: 4 x power supply modules (when ordering state the national standard)
43
205
51
708/5 Socket strip 4 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6 Socket strip 5 Modules: 3 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8 Input cable 3 x 1.5 mm2 (⅛"), black Schuko right angle plug + jack GST18/3 Length approx. 300 cm (118⅛")
21
708/9 Extension lead 3 x 1.5 mm2 (⅛"), black plug + jack GST18/3 Length approx. 100 cm (39⅜")
13
79
Confair folding table Accessories
Cable cover made of aluminium sheet, coated black with strain anchors affixed to the table top on both sides.
Cable clip on the table leg made of black glass fibre-reinforced polyamide to accommodate the cable on the table frame’s upright.
Textile sleeving for cables elastic, polyester
Cable basket for mounting under the table top curved, perforated metal basket, coated black, retractable
Storage net polyester, black
Mount for attaching powerstrips metal bracket
80
540 range Contas
Design: wiege, Fritz Frenkler, Anette Ponholzer
Technical details Function Lightweight, flexible conference table system that can be used in multi-purpose conference, seminar and training environments. It consists of individual tables that can be optionally stacked and folded. It has connecting leaves with quick and easy tool-free linkage thanks to a patented multiple connector plate, making a variety of configurations possible.
Frame Legs in round steel tubing Ø 38 mm (1½"), bright chrome plated or coated. Adjustable glides (with disc profile on folding-leg table version) in black polyamide for soft floors (standard) and in black polyurethane for hard floors (please specify when ordering). Optionally, as stackable version (integral separator) with legs that are locked in place using a retaining clamp integrated into the table top. Leg retaining clamp in black polyamide. Multiple connector plate on tables and connecting leaves in die-cast zinc, bright chrome plated or coated. Multiple connector plate on the connecting leaves fitted with separator and retention mechanism. Tables fitted with table-to-table connectors.
Core material of table top Particle board with straight, concealed lipping. Table top group 1 – laminate Table top thickness 34 mm (1⅜") Laminate according to Wilkhahn colour and surface finish samples with beech lipping, natural oiled finish. Table top group 2 – veneer Table top thickness 34 mm (1⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.
Modesty panels Modesty panels with aluminium frame, coated with a silver satin finish, covered with transparent anthracite fabric. Grips in black polyamide. Standards The Contas tables comply with DIN EN 527.
When placing repeat orders, please indicate whether your tabletops have slip-matched or book-matched veneer.
Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Some specific growth features possible. Table top group 3 – linoleum Table top thickness 35 mm (1⅜") Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish. Further surfaces for the formats shown in the price list are available on request.
Frame versions
Table frame and edge profiles 51 53 60
Accessories
Bright chrome plated Coated black Coated, silver satin finish
546/75 Four-wheeled trolley to take five folding tables 540/15 (table depth 75 cm) 546/90 Four-wheeled trolley to take five folding tables 540/25 (table depth 90 cm) 549/02 Modesty panel Length 65 (25⅝"), H 40 (15¾"), for models 540/11 and short edges of models 540/15 and 540/18 549/03 Modesty panel Length 80 (31½"), H 40 (15¾"), for the front edges of the 540/25 and 540/28 models 549/04 Modesty panel Length 140 (55⅛"), H 40 (15¾"), for models 540/15 and 540/25 549/05 Modesty panel Length 170 (66⅞"), H 40 (15¾"), for models 540/18 and 540/28 549/10 Modesty panel Length 148 (58¼"), H 40 (15¾"), for models 541/15 and 541/25 549/20 Table-table connector 549/21 Table-connecting leaf connector
€ 1245 1245 394 411 578 593 593 14 17
81
541/15 75 x 150 (29½" x 59") Frame aluminium coated Additional charge Frame aluminium bright chrome plated
Linoleum
Contas Connecting leaf, panel depth 75 cm (29½")
€
€
€
1275
1503
1686
1567
364 176
364 176
364 176
364
1578
2004
2324
2174
394 176
394 176
394 176
394
1822
2263
2626
2477
411 176
411 176
411 176
411
1
2
Table top group 2 3 Linoleum
Additional charges Frame aluminium bright chrome plated As folding table
Veneer variation 2
540/18 75 x 180, H 73 (29½" x 70⅞", H 28¾") Frame aluminium coated
€
Veneer variation 2
Additional charges Frame aluminium bright chrome plated As folding table
Veneer variation 1
540/15 75 x 150, H 73 (29½" x 59", H 28¾") Frame aluminium coated
Table top group 2 3
Veneer variation 1
Additional charges Frame aluminium bright chrome plated As folding table
2
Laminate 540/11 75 x 75, H 73 (29½" x 29½", H 28¾") Frame aluminium coated
1
Laminate
Contas Fixed-leg and folding leg tables, table top depth 75 cm (29½")
€
€
€
€
1240
1666
1986
1836
149
149
149
149
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See accessories for corresponding modesty panels to fit long edges and short edges.
82
Additional charge Frame aluminium bright chrome plated
Linoleum
€
€
€
1749
2108
2461
2324
410 176
410 176
410 176
410
1959
2338
2748
2582
425 176
425 176
425 176
425
1
2
Table top group 2 3 Linoleum
541/25 90 x 150 (35⅜" x 59") Frame aluminium coated
Veneer variation 2
Contas Connecting leaf, panel depth 90 cm (35⅜")
€
Veneer variation 2
Additional charges Frame aluminium bright chrome plated As folding table
Veneer variation 1
540/28 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Frame aluminium coated
Table top group 2 3
Veneer variation 1
Additional charges Frame aluminium bright chrome plated As folding table
2
Laminate 540/25 90 x 150, H 73 (35⅜" x 59", H 28¾") Frame aluminium coated
1
Laminate
Contas Fixed-leg and folding leg tables, table top depth 90 cm (35⅜")
€
€
€
€
1409
1768
2121
1984
149
149
149
149
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See accessories for modesty panels to fit long edges and short edges.
83
544 range Concentra Design: wiege
Technical details Function Tables for versatile furnishing of offices and communication areas, as a combination or as stand-alone for project work, training and seminars, lounges, bistros, canteens and recreational areas etc.
Power supply
84
Frame Legs made of round steel tube, 40 mm (15/8“) in diameter, bright chrome plated or black, white or silver satin finish. Multi-purpose, polyamide glides in black for soft and hard floorings. Die-cast zinc table-leg mounts to match the table legs, optionally bright chrome-plated or coated. Underframe attached with screws and with underframe profiles made of square steel tubing (35 x 25 mm (1⅜" x 1") and black-coated corner angles made of die-cast zinc.
Core material of table top E1 plywood tabletop or singlepane reinforced glass. Table top group 1 – laminate Table top thickness 19 mm (¾") Laminate according to the Wilkhahn colour and surface samples with polypropylene plastic lipping.
Table top group 2 – veneer Table top thickness 19 mm (¾") Variation 1: Beech, oak and ash veneer according to Wilkhahn woodstain colour samples with wooden lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: maple and beech veneer. Some specific growth features possible.
Tabletop group 5 – direct coating Table top thickness 19 mm (¾") Melamine resin, directly coated in white or light grey with plastic lipping in the same colour as the surface made of ABS. Table top group 11 - glass Table top thickness 10 mm (¾") Tabletop 10 mm (⅜“) thick, singlepane reinforced glass on the bottom optionally opaquely coated in white or black, chamfered and polished lipping with bumpers made of stainless steel 10 mm (⅜") thick.
Further surfaces for the formats shown in the price list are available on request. Modesty panels Aluminium frame, black coated and covered with black fabric. Table-table-connectors (optional) 2 sheet-steel connectors, black coated, 4 star-grip screws.
Accessories Cable outlet Aluminium cable outlet Aluminium cable outlet, 85 mm (3⅜“) in diameter, coated black, or clear anodised (only for tabletop groups 1 and 2) or in plastic, 80 mm (3⅛“) in diameter, in black (for tabletop groups 5, 1 and 2). Drill holes and assembly only in the factory when the tables are ordered.
Standards The Concentra tables comply with the DIN EN 527 and ANSI / BIFMA X 5.5 standards.
Cable track profile Aluminium extruded profile, clear anodised, which is screwed underneath the tabletop and serves as a support for the cable track. Cable track Polypropylene cable track in black with sections for two different cables. Vertical cable riser Polyamide links in black, plastic foot section in black with a steel core. Adapter for cable track in black plastic. Length 80 cm (31½").
Frame versions 49 51 53 60
Legs and capitals
Under frames and corner angles
Coated signal white Bright chrome plated Coated black Coated, silver satin finish
Coated black Coated black Coated black Coated black €
Accessories
Table-table connector (2 units) Modesty panel 640 mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾") Modesty panel 690 mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾") Modesty panel 790 mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾") Modesty panel 890 mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾") Modesty panel 1390 mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾") Modesty panel 1490 mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾") Modesty panel 1690 mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾") Modesty panel 1890 mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾") Cable outlet Black plastic, Ø 80 mm (3⅛"), for tabletop groups 5, 1 and 2 Cable outlet Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2 Cable outlet Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2 Cable management horizontal Cable track to fit to the cable track profile underneath the tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position see drawing 548* Cable management vertical Cable riser with adapter to connect with the cable track’s profile, foot section with steel core * not for glass tops
544 545/01 545/02 545/03 545/04 545/05 545/06 545/07 545/08 707/1* 707/2* 707/3* 547*
33 280 282 288 292 354 381 393 407 58 126 126 88 47
85
Rectangular
544/00 e.g. 80 x 160, H 73 (31½" x 63", H 28¾") Frame coated
5
1
2
2
11
Bonded surface
Laminate
Veneer variation 1
Veneer variation 2
Glass
Table top group
Concentra Tables
€
€
€
€
€
617
827 1046 1152 1685
Depth
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
75 (29½") 547 – – 608 • 646 •
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
711 – – 806 • 878 •
– 727 – • 827 • •
– – 753 878 • 950 •
– – – • • • 1097
– – – – 1197 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
843 – – 1015 • 1097 •
– 874 – • 1046 • •
– – 905 1097 • 1180 •
– – – • • • 1312
– – – – 1456 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
919 – – 1120 • 1219 •
– 954 – • 1152 • •
– – 987 1219 • 1318 •
– – – • • • 1466
– – – – 1621 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
1076 – – 1588 • 1745 •
– 1128 – • 1685 • •
– – 1239 1745 • 1902 •
– – – • • • 2156
– – – – 2687 – –
Length
80 (31½") – 556 – • 617 • •
90 (35⅜") – – 567 646 • 684 •
100 (39⅜") – – – • • • 798
160 (63") – – – – 866 – –
• available on request – not available Round
Ø 126, H 73 (49⅝", H 28¾") Frame coated
673
870
1100
1224
1692
€ Additional charges/reduced prices specific to range
86
Frame bright chrome plated
104
600 range Conversa Design: wiege
Technical details Function Tables for versatile furnishing of offices and communication areas, as a combination or stand-alone for project work, training and seminars, lounges, bistros, canteens and recreational areas etc.
Frame Legs made of square steel tube (40 x 40 mm (15/8" x 15/8")), bright chrome plated or black, white or silver satin finish. Multi-purpose, polyamide glides in black for soft and hard floorings. Die-cast zinc table-leg mounts to match the table legs, optionally bright chromeplated or coated. Underframe attached with screws and with underframe profiles made of square steel tubing (35 x 25 mm (1⅜" x 1") and black-coated corner angles made of die-cast zinc.
Core material of table top E1 plywood tabletop or singlepane reinforced glass. Table top group 1 – laminate Table top thickness 19 mm (¾") Laminate according to the Wilkhahn colour and surface samples with ABS plastic lipping.
Table top group 2 – veneer Table top thickness 19 mm (¾") Variation 1: Beech, oak and ash veneer according to Wilkhahn woodstain colour samples with wooden lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: Maple and beech veneer. Some specific growth features possible.
Power supply
87
Tabletop group 5 – direct coating Table top thickness 19 mm (¾") Melamine resin, directly coated in white or light grey, with ABS plastic lipping, colour matched with the surface. Table top group 11 - glass Table top thickness 10 mm (¾") Single-pane reinforced glass on the bottom optionally opaquely coated in white or black, chamfered and polished lipping with bumpers made of stainless steel 10 mm (⅜") thick.
Modesty panels Aluminium frame, black coated and covered with black fabric. Table-table-connectors (optional) 2 sheet-steel connectors, black coated, 4 star-grip screws.
Accessories Cable outlet Aluminium cable outlet Aluminium cable outlet, 85 mm (3⅜“) in diameter, coated black, or clear anodised (only for tabletop groups 1 and 2) or in plastic, 80 mm (3⅛“) in diameter, in black (for tabletop groups 5, 1 and 2). Drill holes and assembly only in the factory when the tables are ordered.
Standards The Conversa tables comply with the DIN EN 527 and ANSI / BIFMA X 5.5 standards.
Cable track profile Aluminium extruded profile, clear anodised, which is screwed on underneath the tabletop and serves as a support for the cable track.
Further surfaces for the formats shown in the price list are available on request.
Cable track Polypropylene cable track in black with sections for two different cables. Vertical cable riser Polyamide links in black, plastic foot section in black with a steel core. Adapter for cable track in black plastic. Length 80 cm (31½").
Frame versions 49 51 53 60
Legs and capitals
Under frames and corner angles
Coated signal white Bright chrome plated Coated black Coated, silver satin finish
Coated black Coated black Coated black Coated black €
Accessories
88
Table-table connector (2 units) Modesty panel 640 mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾") Modesty panel 690 mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾") Modesty panel 790 mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾") Modesty panel 890 mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾") Modesty panel 1390 mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾") Modesty panel 1490 mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾") Modesty panel 1690 mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾") Modesty panel 1890 mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾") Cable outlet Black plastic, Ø 80 mm (3⅛"), for tabletop groups 5, 1 and 2 Cable outlet Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2 Cable outlet Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2 Cable management horizontal Cable track to fit to the cable track profile underneath the tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position see drawing 603* Cable management vertical Cable riser with adapter to connect with the cable track’s profile, foot section with steel core * not for glass tops
600 601/01 601/02 601/03 601/04 601/05 601/06 601/07 601/08 707/1* 707/2* 707/3* 602*
33 280 282 288 292 354 381 393 407 58 126 126 88 47
Rectangular
600/00 e.g. 80 x 160, H 73 (31½" x 63", H 28¾") Frame coated
5
1
2
2
11
Bonded surface
Laminate
Veneer variation 1
Veneer variation 2
Glass
Table top group
Conversa Tables
€
€
€
€
€
617
827 1046 1152 1685
Depth
Length 75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
75 (29½") 547 – – 608 • 646 •
80 (31½") – 556 – • 617 • •
90 (35⅜") – – 567 646 • 684 •
100 (39⅜") – – – • • • 798
160 (63") – – – – 866 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
711 – – 806 • 878 •
– 727 – • 827 • •
– – 753 878 • 950 •
– – – • • • 1097
– – – – 1197 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
843 – – 1015 • 1097 •
– 874 – • 1046 • •
– – 905 1097 • 1180 •
– – – • • • 1312
– – – – 1456 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
919 – – 1120 • 1219 •
– 954 – • 1152 • •
– – 987 1219 • 1318 •
– – – • • • 1466
– – – – 1621 – –
75 (29½") 80 (31½") 90 (35⅜") 150 (59") 160 (63") 180 (70⅞") 200 (78¾")
1076 – – 1588 • 1745 •
– 1128 – • 1685 • •
– – 1239 1745 • 1902 •
– – – • • • 2156
– – – – 2687 – –
• available on request – not available
€ Additional charges/reduced prices specific to range
Frame bright chrome plated
104
89
610 range Timetable
Design: Andreas Störiko
Technical details Function A mobile table range with table tops that can be flipped up in the middle on the long sides which automatically causes the feet on the table to turn in (does not apply to Timetable Smart and Timetable Shift models). Suitable for multipurpose spaces for interactive and dynamic types of conferences. Ideal in combination with the Confair range and the Logon table range for multi-purpose use of high-quality conference, lecture and meeting spaces. Timetable Smart is ideal for multi-purpose interiors and for hot desking. When flipped up it nests very compactly into the other tables, Timetable Smart has a locking mechanism and staggered nesting capabilities.
Frame
Timetable Shift
Timetable / Timetable Smart Foot section in die-cast aluminium, bright chrome plated or polished. Uprights and underframes in steel tube, silver, satin finish, or black. Uprights optionally available with a bright chrome-plated finish (standard Timetable only). Table top bearer in die-cast zinc, coated black, Timetable Smart has table top bearer in steel profile, draw rod in round steel tubing and is coated black. Lockable, height-adjustable swivel castors with a black polyamide tyre are the standard version for carpeted floors; castors available with a polyurethane tyre for hard floors (please specify when ordering).
Standards The Timetable Shift tables comply with the DIN EN 527 standard.
Die-cast aluminium base, bright chrome plated, polished or silver satin finish or black coating. Aluminium profile upright, clear anodized or silver satin finish, or black coating; bright chrome-plated foot sections are coated in black. Upright optionally available bright chrome plated. Aluminium profile underframe with integrated cable channel, depending on the foot section, silver satin finish or black coated. Steel profile table top bearer. Round steel tubing draw rod, depending on foot section, black or silver satin finish coating. Lockable, height-adjustable polyamide swivel castors. Core material of table top Particle board with bullnose wood lipping with integral, impact-resilient profile in black elastomer. Timetable Smart with melamine resin directly coated in light or dark grey and with straight, colourmatched plastic lipping, or optionally with plywood with bullnose, wood edge with integrated impact-resilient profile made of black elastomer.
90
Table top group 1 – laminate Table top thickness 26 mm (1⅜") Laminate according to Wilkhahn colour and surface finish samples with beech lipping, natural oiled finish. Table top group 2 – veneer Table top thickness: 26 mm (1") Variation 1: Beech, oak and ash veneer from Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Maple and beech veneer. Some specific growth features possible. Table top group 3 – linoleum Table top thickness 27 mm (11/8"). Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish.
Tabletop group 5 – direct coating (only Timetable Smart) Table top, thickness 25 mm (1”) With melamine resin with direct coating in light or dark grey with plastic lipping in the same colour as the surface. Further surfaces for the formats shown in the price list are available on request.
Modesty panels Modesty panels with aluminium frame, coated with a silver satin finish, covered with transparent anthracite fabric. Grips in black polyamide.
When placing repeat orders, please indicate whether your tabletops have slip-matched or book-matched veneer.
Table-table-connectors (optional) Metal table-table-connectors model 613: 2 lockable circlips made of black coated sheet steel with 4 stargrip screws and additionally for Timetable Smart:plastic table-tableconnectors . Model 616: 2 rotatable circlips with 2 collets in black, through-dyed, glass fibre-reinforced polyamide with washers.
Edge profiles Standard version: Bullnose double with integral, impact-resilient profile Alternatively: Straight with integral, impact-resilient profile
Frame versions
Foot section 51 Bright chrome plated 52 Aluminium polished
Upright and underframe
Top bearer
Silver satin finish or black coating or bright cromium plated Coated silver satin finish or black (Timetable / Timetable Smart) Uprights clear anodized (Timetable Shift) Coated silver satin finish or black
Coated black
53 Coated black (Timetable Shift) 60 Coated, silver satin finish Coated silver satin finish or black (Timetable Shift) Accessories Timetable Shift
Coated black (Timetable / Timetable Smart) Coated silver satin finish or black (Timetable Shift) Coated silver satin finish or black Coated silver satin finish or black
614/1 Set of sockets complete, incl. socket strip mod. 708/1 614/2 Set of sockets complete, incl. socket strip mod. 708/2 614/4 Set of sockets complete, incl. socket strip mod. 708/4 614/5 Set of sockets complete, incl. socket strip mod. 708/5 614/6 Set of sockets complete, incl. socket strip mod. 708/6 614/8 Strain anchor with insertion plate and fastening material (without socket strip) 614/9 Cable holder (1 item) 614/91 Cable clip for vertical cable management on the column (2 items)
€ 100 272 113 601 377 27 6 18
91
Table top group 3 Linoleum
2 Veneer variation 2
610/00 e.g. 75 x 150, H 73 (29½" x 59", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated
2 Veneer variation 1
€ Rectangular
1 Laminate
Timetable Tables
€
€
€
€
1719
1987
2290
2121
Additional charges/reduced prices specific to range Foot section bright chrome plated, upright and underframe aluminium coated Foot section and upright bright chrome plated, underframe aluminium coated
60
•
•
•
•
102
•
•
•
•
Modesty panel aluminium coated (length 140 cm (55⅛")) Modesty panel aluminium coated (length 150 cm (59")) Modesty panel aluminium coated (length 160 cm (63")) Modesty panel aluminium coated (length 180 cm (70⅞"))
634 639 647 657
• • • •
• • • •
• • • •
• • • •
96
•
•
•
•
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
104
•
•
•
•
Table-table-connectors model 613, metal (2 items) Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
Depth
Length 140 (55⅛") 150 (59") 160 (63") 180 (70⅞")
60 (23⅝") 1516 1573 1630 1687
70 (27½") 1588 1954 2018 2071
75 (29½") 1662 1719 2062 1805
140 (55⅛") 150 (59") 160 (63") 180 (70⅞")
1689 1774 1858 1942
1796 2258 2364 2441
1902 1987 2438 2128
140 (55⅛") 150 (59") 160 (63") 180 (70⅞")
1909 2022 2137 2248
2043 2588 2734 2832
2176 2290 2808 2483
140 (55⅛") 150 (59") 160 (63") 180 (70⅞")
1776 1875 1974 2070
1796 2398 2525 2607
2022 2121 2593 2289
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 98. The relevant ITS must be ordered separately (see page 97).
1 2
All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).
92
Linoleum
Table top group 2 3 Veneer variation 2
2 Veneer variation 1
Additional charges Foot section bright chrome plated, upright and underframe aluminium coated Particle board with bullnose wood lipping with integral, impact-resilient profile in black elastomer Table-table-connectors model 613, metal (2 items) Table-table-connectors model 616, plastic (2 items) Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1 Preparation for ITS 701/95, set price includes: cutout section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1
1 Laminate
612/51 60 x 150, H 73 (23⅝" x 59", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated
5 Bonded surface
Timetable Smart Tables
€
€
€
€
€
60
60
60
60
60
– – 64
337 96 64
606 96 64
909 96 64
740 96 64
–
193
193
193
–
–
104
104
104
–
60
60
60
60
60
– – 64
347 96 64
618 96 64
925 96 64
754 96 64
–
193
193
193
–
–
104
104
104
–
960
The relevant ITS must be ordered separately (see page 97).
1
612/51 75 x 150, H 73 (29½" x 59", H 28¾"), compact storage Foot sections aluminium polished, upright and underframe aluminium coated Additional charges Foot section bright chrome plated, upright and underframe aluminium coated Particle board with bullnose wood lipping with integral, impact-resilient profile in black elastomer Table-table-connectors model 613, metal (2 items) Table-table-connectors model 616, plastic (2 items) Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1 Preparation for ITS 701/95, set price includes: cutout section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1
965
The relevant ITS must be ordered separately (see page 97).
1
– not available
All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).
93
Table top group Veneer variation 2
Linoleum
Table-table-connectors model 613, metal (2 items) Set price single table portal 300 x 150 mm, including cable channel 1 Set price single table portal 300 x 120 mm, including cable channel 1 Set price single table portal 300 x 150 mm, including fastening material in the underframe 1 Set price single table portal 300 x 120 mm, including fastening material in the underframe 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
3
Veneer variation 1
Modesty panel aluminium coated (length 150 cm (59")) Modesty panel aluminium coated (length 160 cm (63")) Modesty panel aluminium coated (length 180 cm (70⅞")) Modesty panel aluminium coated (length 200 cm (78¾")) Modesty panel aluminium coated (length 210 cm (82⅝"))
2
€
€
€
1911
2273
2661
2456
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
639 647 657 668 801
• • • • •
• • • • •
• • • • •
• • • • •
96
•
•
•
•
475
1058 •
1271 •
1271 •
– •
715
926
926
–
131
•
•
•
•
193
•
•
•
•
104
•
•
•
•
614/00 e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾"), compact storage Aluminium-coated foot section, uprights and under-frames coated Additional charges/reduced prices specific to range Polished aluminium foot section, uprights clear anodized, underframes coated Bright, chrome plated aluminium foot section, uprights and underframes coated Bright, chrome plated aluminium foot section, bright, chrome plated uprights, underframes coated
2
€
€ Rectangular
1 Laminate
Timetable Shift Tables
Depth
Length 150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
80 (31½") 1901 1678 2137 2415 2661
90 (35⅜") 1678 2115 1911 2573 2393
100 (39⅜") – 1950 2227 2504 3236
105 (41⅜") – – 2800 3047 2854
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
2222 1980 2576 2874 3155
1980 2546 2273 3048 2816
– 2327 2651 2976 3796
– – 3260 3701 3348
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
2664 2311 3078 3325 3689
2311 3022 2661 3555 3260
– 2718 3085 3453 4354
– – 3772 4270 3845
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
2479 2131 2844 3153 3528
2131 2797 2456 3288 3027
– 2513 2861 3211 4151
– – 3560 3854 3595
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 98. The relevant ITS must be ordered separately (see page 97).
1 2
94
Table top group Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm, including fastening material in the underframe 1 Set price single table portal 300 x 120 mm, including fastening material in the underframe 1
2
€
€
€
2335
2759
3193
2969
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
715
926
926
–
•
•
•
•
614/42 e.g. 80/100 x 180, H 73 (31¼"/39⅜" x 70⅞", H 28¾"), compact storage Aluminium-coated foot section, uprights and under-frames coated Additional charges/reduced prices specific to range Polished aluminium foot section, uprights clear anodized, underframes coated Bright, chrome plated aluminium foot section, uprights and underframes coated Bright, chrome plated aluminium foot section, bright, chrome plated uprights, underframes coated
2
€
€ Barrel-shaped
1 Laminate
Timetable Shift Tables
131
Depth
Length 180 (70⅞") 210 (82⅝")
80/100 (31½"/39⅜") 2335 –
80/105 (31½"/41⅜") – 2962
180 (70⅞") 210 (82⅝")
2759 –
– 3455
180 (70⅞") 210 (82⅝")
3193 –
– 3953
180 (70⅞") 210 (82⅝")
2969 –
– 3703
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 98..
1
95
Timetable / Timetable Smart / Timetable Shift Mounting positions
A1
A1
A1
A2
A3
A2
A3
A2
A3
610/00 Timetable Single table portals for 75 and 80 cm table depths Integrated techni-stations for 60 to 80 cm table depths
612/51 Timetable Smart only integrated techni-stations possible, single table portal not possible
614/00 Timetable Shift Integrated techni-stations only possible in position A2, not in position M2. Single table portals possible in position M2 and A2, in position A2 only for 100 – 105 cm table depths
M2
614/42 Timetable Shift single table portals only possible in position M2
M2
possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for integrated techni-station on both sides or single table portals
96
Timetable / Timetable Smart / Timetable Shift Modules with power supply
Ex-factory price * € Integrated techni-station on both sides (ITS)
701/60 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Integrated opening mechanism at the touch of a button Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
701/70 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Integrated opening mechanism at the touch of a button
221 96
396
Additional charge Cable harness covered with black fabric sleeving
96
701/95 3 modules: 1 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port
51
* No discounts for ex-factory prices.
97
Timetable / Timetable Smart / Timetable Shift Modules with power supply
€ Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides. Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°. Included in the set prices Cable channel to integrate the socket strip. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Cable management to the left or right of the table leg, optionally with hook and loop strap. Cables are routed via the table frame’s upright to the floor. Including strain anchor, insertion plates and fastening material
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle. Included in the set prices Cable channel to integrate the socket strip. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Cable management to the left or right of the table leg, optionally with hook and loop strap. Cables are routed via the table frame’s upright to the floor. Including strain anchor, insertion plates and fastening material 708/1 Socket strip 3 Modules: 3 x power supply modules (when ordering state the national standard) 708/2 Socket strip 3 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip 4 Modules: 4 x power supply modules (when ordering state the national standard)
98
43
205
51
708/5 Socket strip 4 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6 Socket strip 5 Modules: 3 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8 Input cable 3 x 1.5 mm2 (⅛"), black Schuko right angle plug + jack GST18/3 Length approx. 300 cm (118⅛")
21
708/9 Extension lead 3 x 1.5 mm2 (⅛"), black plug + jack GST18/3 Length approx. 100 cm (39⅜")
13
Timetable / Timetable Smart / Timetable Shift Accessories
Cable cover made of aluminium sheet, coated black with strain anchors affixed to the table top on both sides.
Cable channels to integrate the socket strips retractable, made of aluminium extruded profile, coated black with strain anchor and insertion plates to integrate the socket strip (vertical or tilted 15°) affixed to the table top.
Cable holder under the table top without hook and loop fastener anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop straps attached.
Cable holder under the table top with hook and loop fastener anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop straps attached.
Cable clip on the table leg made of black glass fibre-reinforced polyamide to accommodate the cable on the table frame’s upright.
Textile sleeving for cables elastic, polyester
99
620 range Logon
Design: Andreas Störiko
Technical details Function Stand-alone tables for use in offices, and system components for permanently linked table configurations in conference rooms. Ideal for combining with Confair folding tables for versatile, partitionable conference rooms. Frame Foot section in die-cast aluminium, bright chrome plated, polished or coated black or silver, satin finish. Aluminium profile uprights, clear anodized or coated; coated black for bright chrome plated foot section. Die-cast aluminium table top bearer coated in either silver satin finish or black, depending on foot section version. Aluminium profile underframe coated in silver satin finish or black, depending on foot section version. Uprights optionally available bright chrome plated. Centre underframe for table depths 75 – 90 cm (29½" – 35⅜"); two separate underframes for table depths 105 – 130 cm (41⅜" – 51⅛"). Adjustable glides in black poly amide. Lockable castors in black polyamide.
Core material of table top Particle board with bullnose double, wood lipping and impact-resilient profile in black elastomer. MDF panel only in combination with veneered surface finish with colour-matched, chamfered wood lipping (with a radiused edge). For system elements: central joining edge straight without any profile.
Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible.
Table top group 1 – laminate Thickness 26 mm (1") Laminate according to Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish.
Table top group 3 – linoleum: Thickness 27 mm (1⅛") Linoleum according to Wilkhahn linoleum colour samples with laminated beech lipping, natural oiled finish.
Table top group 2 – veneer Table top thickness 26 mm (1") Variation 1: Beech, oak or ash veneer (exception: ash, natural finish, is not available with a chamfered edge version) according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple (exception no natural maple in chamfered-edge versions), walnut or elm veneer as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. (Maple, natural finish, is not available with a chamfered edge version).
Further surfaces for the formats shown in the price list are available on request.
Single table portal Portal with brushed profile the same colour and material as the table top on both sides. Aperture with real wood lipping, as far as possible in the same colour as the table top. Hinge can be opened to 180°. Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞") Linoleum on request. Standards Logon tables conform to the Standard ANSI / BIFMA X 5.5. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer.
Modesty panels Fluted extruded aluminium profile, clear anodized or coated black. Screw connectors to table top, clear anodized. Modesty panels may also be retro-fitted. Price on request.
Edge profiles Standard version: Bullnose double with integral, impact-resilient profile Alternatively: Straight with integral, impact-resilient profile Alternatively: Chamfer edge profile on veneer version Frame versions
Accessories
100
Foot section
Upright
Top bearer and underframe
51
Bright chrome plated
Coated black
52 53 60
Aluminium polished Coated black Coated, silver satin finish
Black coated or bright chrome plated Clear anodized Coated black Coated, silver satin finish
620/1 CPU holder 620/2 Vertical cable channel for channelling cables between uprights Coated black or silver satin finish
Coated, silver satin finish Coated black Coated, silver satin finish
€ 343 310
Table top group 3 Linoleum
2 Veneer variation 2
620/00 e.g. 120 x 240, H 73 (47¼" x 94½", H 28¾") Foot section and upright aluminium coated
2 Veneer variation 1
€ Rectangular
1 Laminate
Logon Tables
€
€
€
€
1878
1995
2539
2230
Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
78 164 370
• • •
• • •
• • •
• • •
Modesty panel aluminium coated (length 150 cm (59")) Modesty panel aluminium clear anodized (length 150 cm (59")) Modesty panel aluminium coated (length 180 cm (70⅞")) Modesty panel aluminium clear anodized (length 180 cm (70⅞")) Modesty panel aluminium coated (length 240 cm (94½")) Modesty panel aluminium clear anodized (length 240 cm (94½"))
384 407 443 468 601 638
• • • • • •
• • • • • •
• • • • • •
• • • • • •
With castors (available up to a max. length of 210 cm (78¾")) Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
144 475
• 1058 •
• 1271 •
• 1271 •
• – •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
Depth Length
75 (29½")
80 (31½")
90 (35⅜")
100 (39⅜")
110 (43¼")
120 (47¼")
130 (51⅛")
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 230 (90½") 240 (94½") 300 (118⅛")
1200 1536 1590 1680 1726 1749 1768 –
1675 1467 1818 1856 1926 1998 1713 –
1761 1793 1555 1634 1713 2081 2114 –
1799 1543 1636 1727 2094 1820 2154 2525
1844 1870 1940 2047 1820 2167 2185 2571
1914 1932 1968 2075 2174 2193 1878 2203
1930 1648 1690 1784 2247 2317 2347 2357
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 230 (90½") 240 (94½") 300 (118⅛")
1242 1600 1653 1752 1803 1835 1853 –
1737 1521 1893 1934 2006 2093 1794 –
1846 1891 1616 1704 1794 2188 2221 –
1868 1606 1710 1813 2201 1918 2274 2666
1930 1963 2037 2154 1918 2274 2321 2721
2000 2018 2068 2188 2285 2310 1995 2335
2027 1732 1779 1887 2369 2445 2493 2504
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 230 (90½") 240 (94½") 300 (118⅛")
1480 1891 1975 2104 2212 2261 2305 –
2033 1786 2212 2358 2505 2577 2206 –
2167 2233 1934 2068 2206 2703 2795 –
2248 1925 2081 2237 2759 2396 2904 3345
2339 2392 2513 2663 2396 2892 2943 3413
2424 2507 2552 2746 2903 2939 2539 2941
2505 2160 2201 2370 3024 3118 3173 3170
150 (59") 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 230 (90½") 240 (94½") 300 (118⅛")
1326 1706 1781 1901 1953 1996 2022 –
1846 1617 2006 2085 2178 2251 1957 –
1959 2017 1738 1847 1957 2414 2446 –
1996 1729 1858 1988 2424 2117 2568 2666
2111 2179 2236 2389 2117 2546 2597 3031
2189 2222 2273 2435 2532 2586 2230 2599
2221 1923 1955 2091 2642 2727 2788 2797
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). 1 For details see page 120. 2 The relevant ITS must be ordered separately (see page 118).
101
Table top group Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
2
€
€
€
2579
2712
3316
2977
78
•
•
•
•
164 370
• •
• •
• •
• •
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
627/42 e.g. 100/120 x 260, H 73 (39⅜"/47¼" x 102⅜", H 28¾"), Foot section and upright aluminium coated Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
2
€
€ Barrel-shaped
1 Laminate
Logon Tables
Depth
Length 240 (94½") 260 (102⅜") 300 (118⅛")
100/120 (39⅜"/47¼") 2416 2579 –
100/130 (39⅜"/51⅛") – – 2895
240 (94½") 260 (102⅜") 300 (118⅛")
2540 2712 –
– – 3050
240 (94½") 260 (102⅜") 300 (118⅛")
3114 3316 –
– – 3746
240 (94½") 260 (102⅜") 300 (118⅛")
2792 2977 –
– – 3360
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 120. The relevant ITS must be ordered separately (see page 118/119).
1 2
102
Table top group Linoleum
3
Veneer variation 2
2
Veneer variation 1
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
2
€
€
€
€
1555
1616
1934
1738
78
•
•
•
•
164 370
• •
• •
• •
• •
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
€ 620/11 e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Foot section and upright aluminium coated Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
1 Laminate
Logon Starting element
Depth
Length 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
80 (31½") 1467 1818 1856 1926 1713
90 (35⅜") 1793 1555 1634 1713 2114
100 (39⅜") 1543 1636 1727 2094 2154
110 (43¼") 1870 1940 2047 1820 2185
120 (47¼") 1932 1968 2075 2174 1878
130 (51⅛") 1648 1690 1784 2247 2347
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
1521 1893 1934 2006 1794
1891 1616 1704 1794 2221
1606 1710 1813 2201 2274
1963 2037 2154 1918 2321
2018 2068 2188 2285 1995
1732 1779 1887 2369 2493
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
1786 2212 2358 2505 2206
2233 1934 2068 2206 2795
1925 2081 2237 2759 2904
2392 2513 2663 2396 2943
2507 2552 2746 2903 2539
2160 2201 2370 3024 3173
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
1617 2006 2085 2178 1957
2017 1738 1847 1957 2446
1729 1858 1988 2424 2568
2179 2236 2389 2117 2597
2222 2273 2435 2532 2230
1923 1955 2091 2642 2788
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 120. The relevant ITS must be ordered separately (see page 118/119).
1 2
103
Table top group Linoleum
3
Veneer variation 2
2
Veneer variation 1
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
2
€
€
€
€
1193
1254
1572
1376
39
•
•
•
•
82 185
• •
• •
• •
• •
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
€ 620/21 e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Foot section and upright aluminium coated Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
1 Laminate
Logon Finishing element
Depth
Length 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
80 (31½") 1105 1457 1495 1564 1352
90 (35⅜") 1432 1193 1272 1352 1752
100 (39⅜") 1182 1274 1365 1732 1793
110 (43¼") 1508 1579 1686 1458 1823
120 (47¼") 1570 1606 1713 1813 1517
130 (51⅛") 1287 1329 1422 1885 1985
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
1160 1531 1572 1645 1433
1529 1254 1342 1433 1859
1245 1349 1452 1839 1912
1602 1675 1793 1557 1960
1656 1707 1826 1923 1633
1371 1417 1525 2007 2131
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
1424 1851 1996 2143 1844
1872 1572 1707 1844 2433
1563 1719 1876 2398 2542
2030 2151 2301 2034 2581
2146 2191 2384 2541 2177
1798 1839 2008 2662 2811
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝") 240 (94½")
1255 1645 1723 1816 1595
1655 1376 1485 1595 2085
1368 1497 1626 2063 2206
1817 1875 2027 1755 2235
1860 1911 2073 2171 1868
1562 1593 1730 2280 2426
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 120. The relevant ITS must be ordered separately (see page 118/119).
1 2
104
Table top group 3 Linoleum
2 Veneer variation 2
2 Veneer variation 1
€ 620/31 e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾") Foot section and upright aluminium coated
1 Laminate
Logon Intermediate element
€
€
€
€
1193
1254
1572
1376
Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
39
•
•
•
•
82 185
• •
• •
• •
• •
Modesty panel aluminium coated (length 160 cm (63")) Modesty panel aluminium clear anodized (length 160 cm (63")) Modesty panel aluminium coated (length 180 cm (70⅞")) Modesty panel aluminium clear anodized (length 180 cm (70⅞")) Modesty panel aluminium coated (length 200 cm (78¾")) Modesty panel aluminium clear anodized (length 200 cm (78¾")) Modesty panel aluminium coated (length 220 cm (86⅝")) Modesty panel aluminium clear anodized (length 220 cm (86⅝"))
384 407 443 468 567 602 601 638
• • • • • • • •
• • • • • • • •
• • • • • • • •
• • • • • • • •
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
Depth
Length 160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝")
80 (31½") 1105 1457 1495 1564
90 (35⅜") 1432 1193 1272 1352
100 (39⅜") 1182 1274 1365 1732
110 (43¼") 1508 1579 1686 1458
120 (47¼") 1570 1606 1713 1813
130 (51⅛") 1287 1329 1422 1885
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝")
1160 1531 1572 1645
1529 1254 1342 1433
1245 1349 1452 1839
1602 1675 1793 1557
1656 1707 1826 1923
1371 1417 1525 2007
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝")
1424 1851 1996 2143
1872 1572 1707 1844
1563 1719 1876 2398
2030 2151 2301 2034
2146 2191 2384 2541
1798 1839 2008 2662
160 (63") 180 (70⅞") 200 (78¾") 220 (86⅝")
1255 1645 1723 1816
1655 1376 1485 1595
1368 1497 1626 2063
1817 1875 2027 1755
1860 1911 2073 2171
1562 1593 1730 2280
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 120. The relevant ITS must be ordered separately (see page 118/119).
1 2
105
Table top group Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
2
€
€
€
2228
2325
2776
2517
78
•
•
•
•
164 370
• •
• •
• •
• •
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
627/51 e.g. 100/130 x 180, H 73 (39⅜"/51⅛" x 70⅞", H 28¾") Foot section and upright aluminium coated Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
2
€
€ Barrel-shaped
1 Laminate
Logon Starting element
Depth
Length 160 (63") 180 (70⅞") 200 (78¾")
100/130 (39⅜"/51⅛") 2187 2228 2322
160 (63") 180 (70⅞") 200 (78¾")
2278 2325 2433
160 (63") 180 (70⅞") 200 (78¾")
2735 2776 2945
160 (63") 180 (70⅞") 200 (78¾")
2485 2517 2653
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 120. The relevant ITS must be ordered separately (see page 118/119).
1 2
106
Table top group Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 2
2
€
€
€
1866
1963
2414
2155
39
•
•
•
•
82 185
• •
• •
• •
• •
475
1058 •
1271 •
1271 •
– •
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
627/61 e.g. 100/130 x 180, H 73 (39⅜"/51⅛" x 70⅞", H 28¾") Foot section and upright aluminium coated Additional charges/reduced prices specific to range Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
2
€
€ Barrel-shaped
1 Laminate
Logon Finishing element
Depth
Length 160 (63") 180 (70⅞") 200 (78¾")
100/130 (39⅜"/51⅛") 1825 1866 1960
160 (63") 180 (70⅞") 200 (78¾")
1916 1963 2071
160 (63") 180 (70⅞") 200 (78¾")
2373 2414 2583
160 (63") 180 (70⅞") 200 (78¾")
2123 2155 2291
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 120. The relevant ITS must be ordered separately (see page 118/119).
1 2
624/91 Corner element 90° 90 x 10 x R 227 x 10 x 90 x 30, H 73 (35⅜" x 3⅞" x R 89⅜" x 3⅞" x 35⅜" x 11¾", H 28¾") Foot section and upright aluminium coated Additional charges Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated Modesty panel aluminium coated Modesty panel aluminium clear anodized
1094
1166
1432
1299
39
•
•
•
•
82 185 155 171
• • • •
• • • •
• • • •
• • • •
107
Table top group Linoleum
3
Veneer variation 2
2
€
€
€
€
3547
4505
4720
4580
Additional charges Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
117
•
•
•
•
246 555
• •
• •
• •
• •
Preparation for ITS 701/95 or 701/85, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1
104
•
•
•
–
Diameter 150 (59") 160 (63")
3526 3547
150 (59") 160 (63")
4390 4505
150 (59") 160 (63")
4577 4720
150 (59") 160 (63")
4443 4580 • available – not available The relevant ITS must be ordered separately (see page 118/119).
1
108
2 Veneer variation 1
€ 621/35 e.g. Ø 160, H 73 (Ø 63", H 28¾") Foot section and upright aluminium coated Frame with welded rectangular steel underframe Veneer direction: cross veneer
1 Laminate
Logon Table
Table top group
Diameter 180 (70⅞") 220 (86⅝")
3739 4619
180 (70⅞") 220 (86⅝")
4418 5249
180 (70⅞") 220 (86⅝")
5036 6000
180 (70⅞") 220 (86⅝")
4701 5622
Linoleum
3
Veneer variation 2
2
Veneer variation 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap, cable clips. 1
2
€
€
€
€
3739
4418
5036
4701
156
•
•
•
•
328 740
• •
• •
• •
• •
193
•
•
•
–
104
•
•
•
–
€ 622/45 e.g. Ø 180, H 73 (Ø 70⅞", H 28¾") Foot section and upright aluminium coated Frame with welded rectangular steel underframe Veneer direction: cross veneer Additional charges Foot section aluminium polished, upright aluminium, clear anodized Foot section aluminium bright chrome plated, upright aluminium, coated black Foot section and upright aluminium bright chrome plated
1 Laminate
Logon Table
• available – not available The relevant ITS must be ordered separately (see page 118/119).
1
109
Logon Examples of table configurations
Veneer variation 1
Veneer variation 2
Table top group 2 2
Laminate
1
€
€
€
13369
14237
15812
13945
14813
16388
622/00 V‑shaped configuration for video conference 310 x 364, H 73 / 150 x 384, H 73 (122" x 143¼", H 28¾" / 59" x 151⅛", H 28¾")
Table configuration for 10 – 12, Comprising 3 table elements, Veneer direction: cross veneer (Optionally with modesty panels and modules with power supply on request) Foot section and upright aluminium coated, foot plate coated black, central column coated Foot section aluminium bright chrome plated, upright aluminium, coated black, foot plate coated black, central column bright chrome plated
110
Logon Mounting positions
620/00 Mounting positions for all table widths, table depths ≤ 90 cm
A2
A1
A3
620/00 Mounting positions from table widths of 200 cm, table depths ≤ 90 cm Single table portals with identical swing
620/00 Mounting positions for all table widths, table depths > 90 cm
A2
Position A2 Single table portal and Basic integrated techni-station only from 120 cm table depth Integrated Comfort techni-station and from both sides only from 110 cm table depth
M2
A1
A3
M1
M3
620/00 Mounting positions from table widths of 200 cm, table depths > 90 cm Position A1 / A3 Single table portal and Basic integrated techni-station only from 120 cm table depth Integrated Comfort techni-station and from both sides only from 110 cm table depth Single table portals with identical swing Position B1 / B3 Single table portals with identical or alternate swing
possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for Comfort integrated technistation from both sides and Basic or single table portals
111
Logon Mounting positions
620/11/21 Mounting positions for all table widths, table depths ≤ 90 cm
A2
A1
620/11/21 Mounting positions from table widths of 200 cm, table depths ≤ 90 cm
A3
620/11/21 Mounting positions for all table widths, table depths > 90 cm
A2
Position A2 Single table portal and Basic integrated techni-station only from 120 cm table depth Integrated Comfort techni-station and from both sides only from 110 cm table depth
M2
A1
A3
M1
M3
Several single table portals in one table system all have identical swing possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
112
620/11/21 Mounting positions from table widths of 200 cm, table depths > 90 cm Position A1 / A3 Single table portal and Basic integrated techni-station only from 120 cm table depth Integrated Comfort techni-station and from both sides only from 110 cm table depth
Logon Mounting positions
620/31 Mounting positions for all table widths, table depths ≤ 90 cm
A2
A1
A3
620/31 Mounting positions from table widths of 200 cm, table depths ≤ 90 cm
620/31 Mounting positions for all table widths, table depths > 90 cm
A2
Position A2 Single table portal and Basic integrated techni-station only from 120 cm table depth Integrated Comfort techni-station and from both sides only from 110 cm table depth
M2
A1
A3
M1
M3
620/31 Mounting positions from table widths of 200 cm, table depths > 90 cm Position A1 / A3 Single table portal and Basic integrated techni-station only from 120 cm table depth Integrated Comfort techni-station and from both sides only from 110 cm table depth
Several single table portals in one table system all have identical swing possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
113
Logon Mounting positions
627/42
M2
M1
M3
627/42 Single table portals with identical or alternate swing
possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
114
Logon Mounting positions
627/51/61 Mounting positions for all table widths
M2
627/51/61 Mounting positions from table widths of 200 cm
M1
M3
Several single table portals in one table system all have identical swing possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
115
621/35 160 cm diameter
M2
622/45 180 cm diameter
M1
M3
Several single table portals in one table system all have identical swing possible mounting position for cable outlet or integrated techni-station Compact / Move possible mounting position for integrated techni-station
116
Logon Mounting positions
622/45 220 cm diameter
A1
A3
M1
B1
M3
B3
Several single table portals in one table system all have identical swing possible mounting position for cable outlet or integrated techni-station Compact / Move possible mounting position for integrated techni-station
117
Logon Modules with power supply
Ex-factory price * € Integrated techni-station on both sides (ITS)
701/60 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Integrated opening mechanism at the touch of a button Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
* No discounts for ex-factory prices.
118
701/70 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Integrated opening mechanism at the touch of a button
221 96
396
Additional charge Cable harness covered with black fabric sleeving
96
701/95 3 modules: 1 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port
51
Logon Modules with power supply
Ex-factory price * € Integrated techni-station Basic (ITS)
701/00 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station Basic (ITS)
701/10 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station Comfort (ITS)
Integrated techni-station Comfort (ITS)
Integrated techni-station Move (ITS)
182 96
378 96
701/20 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 300 cm (13¾") long
1075
701/30 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 300 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
1153
701/85 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
375
Additional charge Cable harness covered with black fabric sleeving
96
* No discounts for ex-factory prices.
119
Logon Modules with power supply
€ Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides. Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°. Including cable channels to integrate the socket strips. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Included in the set prices Cable channel to integrate the socket strip. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Cable management to the left or right of the table leg, optionally with hook and loop strap. Cables are routed via the table frame’s upright to the floor, or optionally via the vertical cable channel.
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle. Included in the set prices Cable channel to integrate the socket strip. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Cable management to the left or right of the table leg, optionally with hook and loop strap. Cables are routed via the table frame’s upright to the floor, or optionally via the vertical cable channel. 708/1 Socket strip 3 Modules: 3 x power supply modules (when ordering state the national standard) 708/2 Socket strip 3 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip 4 Modules: 4 x power supply modules (when ordering state the national standard)
120
43
205
51
708/5 Socket strip 4 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6 Socket strip 5 Modules: 3 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8 Input cable 3 x 1.5 mm2 (⅛"), black Schuko right angle plug + jack GST18/3 Length approx. 300 cm (118⅛")
21
708/9 Extension lead 3 x 1.5 mm2 (⅛"), black plug + jack GST18/3 Length approx. 100 cm (39⅜")
13
Logon Accessories
Cable cover, for models 701/60 and 701/70 made of aluminium sheet, coated black with strain anchors affixed to the table top on both sides.
Cable cover, for models 701/00, 701/10, 701/20 and 701/30 made of aluminium sheet, coated black with strain anchors affixed to the table top on both sides.
Cable channels to integrate the socket strips retractable, made of aluminium extruded profile, coated black with strain anchor and insertion plates to integrate the socket strip (vertical or tilted 15°) affixed to the table top.
Cable holder under the table top without hook and loop fastener anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop straps attached.
Cable holder under the table top with hook and loop fastener anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop straps attached.
Cable clip on the table leg made of black glass fibre-reinforced polyamide to accommodate the cable on the table frame’s upright.
Textile sleeving for cables
Vertical cable channel, for model 620
121
632 range
Technical details Function Centre pedestal tables for meetings, cafeterias or dining rooms at home.
Frame models 632/00, diameter 90, 110, 125 cm Steel disc base (Ø 610 mm) with sheet steel cover, coated in white or black, or with optional ultra- polished stainless steel cover. Steel column to match the foot section, coated in black or white, with stainless steel ultra-polished foot section, table column is bright chrome- plated. Table top bearer (cross brace) in black. Frame model 632/00, 150 cm in diameter Steel disc base (Ø 735 mm) with sheet steel cover, coated in white or black, or with optional ultra- polished stainless steel cover. Steel column to match the foot section, coated in black or white, with stainless steel ultra-polished foot section, table column is bright chrome- plated. Connecting flange in steel and coated in black.
Frame versions
122
Core material of t able top Particle board with straight, colour-matched wood lipping.
Further surfaces for the formats shown in the price list are available on request.
Table top group 1 – laminate Table top thickness 26 mm (1") Laminate according to Wilkhahn colour and surface finish samples with wood lipping, natural oiled finish.
Veneer version As a standard, veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible.
Table top group 2 – veneer Table top thickness 26 mm (1") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.
When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer.
Tables
Disc base with cover
Table column
Table top bearer
49
Coated white
Coated white
Coated black
53
Coated black
Coated black
Coated black
71
Polished stainless steel
coated or bright chrome plated
Coated black
Table top group
632/00 Ø 110, H 73 (Ø 43¼", H 28¾") Frame coated Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
632/00 Ø 125, H 73 (Ø 49¼", H 28¾") Frame coated Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
632/00 Ø 150, H 73 (Ø 59", H 28¾") Frame coated Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
2 Veneer variation 2
Additional charges Disc base with ultra-polished, stainless steel cover, coated table column Disc base with ultra-polished, stainless steel cover, bright chrome plated table column
2 Veneer variation 1
632/00 Ø 90, H 73 (Ø 35⅜", H 28¾") Frame coated
1 Laminate
632 range Tables
€
€
€
985
1125
1157
83
83
83
145
145
145
1154
1293
1342
83
83
83
145
145
145
1274
1481
1544
83
83
83
145
145
145
1878
1924
2013
126
126
126
197
197
197
123
640 range Palette
Design: Karlheinz Rubner
Technical details Function Flexible, impressive-looking table system with options ranging from the single table to complex con ference table system for office, seminar and conference rooms. Table top forms, lipping and table leg shapes can be adapted to suit different design concepts. Ideal for customized conference table systems and integrating state-ofthe-art information and communications technologies. Frame Legs in square aluminium profile 100 x 100 mm (3⅞" x 3⅞"), clear anodised or coated, with four bolts and connected with a bayonet lock integrated into the table top. Optionally with legs in round aluminium tubing ø 65 mm (2½") – also possible here with a bright chrome-plated finish. Base element with adjustable black polyamide glides.
Core material of table top Lamin board with straight, concealed lipping. On request, lipping also with bullnose profile (sides of tables that are to be linked are only available with a straight edge). Integrated connecting mechanism for fixing legs. Table top group 1 – laminate Thickness 39 mm (1½") Laminate according to Wilkhahn colour and surface finish samples with laminated beech lipping, natural oiled finish. Table top group 2 – veneer Table top thickness 39 mm (1½") Variation 1: Beech veneer according to Wilkhahn woodstain colour samples with laminated beech lipping, as far as possible in the same colour as the veneer, or oak or ash veneer according to Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to the Wilkhahn woodstain colour samples with lipping, as far as possible in the same colour as the veneer.
Edge profiles
Veneer types As a standard, veneers are slip-matched onto the table top. The surfaces are sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer. Closed-pore: maple and beech veneer. Bottom of table in beech veneer, mostly colour matched with the veneer on the top of the table. Some specific growth features possible.
Standards Palette tables comply with ANSI /BIFMA X 5.5. When placing repeat orders, please indicate whether your table tops have slip-matched or book-matched veneer. Adjoining table systems can be matched up to a maximum length of 270 cm (106¼“).
Table top group 3 – linoleum Table top thickness 40 mm (15/8"). Linoleum according to Wilkhahn linoleum colour samples, laminated beech lipping, natural oiled finish. Further surfaces for the formats shown in the price list are available on request.
Leg forms Square
Round
Straight
Bullnose double
Please note: check in advance to see whether the edge profiles are available for the relevant table shapes and configurations. Additional charges for profiles that are not straight on request. Only tables with straight edges can be linked.
Frame versions
Table frame and edge profiles 51 53 60 62
Accessories
124
bright chrome plated aluminium Coated black Coated, silver satin finish Clear anodized
646/01 Four-wheeled trolley for five table tops 90 x 90 (35⅜" x 35⅜") and/or 90 x 180 (35⅜" x 70⅞") and fourteen square table legs 10 x 10 (3⅞" x 3⅞")
€
1463
Table top group 3 Linoleum
2 Veneer variation 2
640/00 e.g. 80 x 160, H 73 (31½" x 63", H 28¾") System table (square table systems cannot be used as corner elements) Frame aluminium coated
2 Veneer variation 1
€ Rectangular
1 Laminate
Palette Tables
€
€
€
€
1570
1752
2057
1752
Additional charge/reduced prices Frame aluminium anodized (with 4 legs) Bright chrome-plated aluminium frame (4 round frame legs) 1 aluminium-coated leg 1 aluminium anodized leg 1 round, chrome plated aluminium frame leg
256 412 154 218 257
• • • • •
• • • • •
• • • • •
• • • • •
Cable outlet black plastic, Ø 80 mm (3⅛") Cable outlet aluminium, coated black or anodized (Ø 85mm (3⅜"))
58 126
• •
• •
• •
• •
590
1174 •
1385 •
1385 •
– •
308
•
•
•
•
323
•
•
•
•
218
•
•
•
•
Set price single table portal 300 x 150 mm 1 Set price single table portal 300 x 120 mm 1 Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap. 2 Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap. 2 Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable management below the table top, optionally with hook and loop strap. 2 Depth
Length 90 (35⅜") 140 (55⅛") 150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
70 (27½") 1544 1440 1486 – – – –
75 (29½") 1591 1792 1532 – – – –
80 90 100 (31½") (35⅜") (39⅜") 1626 1348 1719 1532 1886 1933 1868 1906 1960 1570 1935 1990 1608 1648 2085 – 1731 1869 – 1815 2286
105 130 (41⅜") (51⅛") 1751 1822 1985 2033 2021 1691 2056 2167 2152 2264 2294 2405 1923 2444
90 (35⅜") 140 (55⅛") 150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
1669 1667 1684 – – – –
90 (35⅜") 140 (55⅛") 150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
90 (35⅜") 140 (55⅛") 150 (59") 160 (63") 180 (70⅞") 200 (78¾") 210 (82⅝")
140 (55⅛") – 1843 – – – – –
150 (59") – – 1993 – – – –
1716 2019 1702 – – – –
1739 1702 2080 1752 1801 – –
1450 2082 2120 2171 1851 1952 2053
1895 2146 2192 2254 2389 2134 2622
1953 2204 2256 2315 2452 2617 2213
1998 2250 1936 2524 2628 2752 2903
– 2275 – – – – –
– – 2433 – – – –
1871 1849 1920 – – – –
1929 2288 1991 – – – –
1953 1991 2424 2057 2123 – –
1641 2441 2510 2623 2190 2315 2439
2136 2546 2628 2803 2885 2553 3137
2200 2588 2672 2893 2960 3142 2665
2277 2703 2322 3028 3169 3345 3522
– 2678 – – – – –
– – 3008 – – – –
1669 1667 1684 – – – –
1716 2019 1702 – – – –
1739 1702 2080 1752 1801 – –
1450 2082 2120 2171 1851 1952 2053
1895 2146 2192 2254 2389 2134 2622
1953 2204 2256 2315 2452 2617 2213
1998 2250 1936 2524 2628 2752 2903
– 2275 – – – – –
– – 2433 – – – –
Prices standard sizes in stock special sizes in available • available – not available When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations). For details see page 129. 2 The relevant ITS must be ordered separately (see page 127).
1
125
Palette Mounting positions
640/00 Width 140 to 210 cm
A2
Position M2 only from 105 cm table depth
M2
Position A2 Only from 140 cm table width and only 90 to 105 cm table depth
640/00 Width 180 to 210 cm
A1
A3
Position M1 / M3 only from 105 cm table depth Single table portals have identical or alternate swing
M1
M3
Position A1 / A3 only 90 – 105 cm table depths
Several single table portals in one table system all have identical swing possible mounting position for cable outlet or integrated techni-station Compact possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
126
Palette Modules with power supply
Ex-factory price * € Integrated techni-station on both sides (ITS)
701/60 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Integrated opening mechanism at the touch of a button Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
701/70 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Integrated opening mechanism at the touch of a button
221 96
396
Additional charge Cable harness covered with black fabric sleeving
96
701/95 3 modules: 1 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x USB 3.0 port
51
* No discounts for ex-factory prices.
127
Palette Modules with power supply
Ex-factory price * € Integrated techni-station Basic (ITS)
701/00 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station Basic (ITS)
701/10 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 350 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long Additional charge Cable harness covered with black fabric sleeving
Integrated techni-station Comfort (ITS)
Integrated techni-station Comfort (ITS)
* No discounts for ex-factory prices.
128
182 96
378 96
701/20 3 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 300 cm (13¾") long
1075
701/30 4 modules: 2 x power supply modules (when ordering state the national standard) with supply cable approx. 300 cm (11¾") 1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently attached cables, approx. 300 cm (13¾") long 1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
1153
Palette Modules with power supply
€ Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides. Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°. Including cable channels to integrate the socket strips. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Included in the set prices Cable channel to integrate the socket strip. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Cable management to the left or right of the table leg, optionally with hook and loop strap. Cables are routed in the table leg to the floor.
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle. Included in the set prices Cable channel to integrate the socket strip. When ordering, state the socket strip’s installation angle: (15° tilted or vertical). Cable management to the left or right of the table leg, optionally with hook and loop strap. Cables are routed in the table leg to the floor. 708/1 Socket strip 3 Modules: 3 x power supply modules (when ordering state the national standard) 708/2 Socket strip 3 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 708/4 Socket strip 4 Modules: 4 x power supply modules (when ordering state the national standard)
43
205
51
708/5 Socket strip 4 Modules: 2 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6 Socket strip 5 Modules: 3 x power supply modules (when ordering state the national standard) 1 x data module with 2 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾") 1 x data module with 1 x RJ45 (category 6, shielded) with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8 Input cable 3 x 1.5 mm2 (⅛"), black Schuko right angle plug + jack GST18/3 Length approx. 300 cm (118⅛")
21
708/9 Extension lead 3 x 1.5 mm2 (⅛"), black plug + jack GST18/3 Length approx. 100 cm (39⅜")
13
129
Palette Accessories
Cable cover, for models 701/60 and 701/70 made of aluminium sheet, coated black with strain anchors affixed to the table top on both sides.
Cable cover, for models 701/00 and 701/30 made of aluminium sheet, coated black with strain anchors affixed to the table top on both sides.
Cable channels to integrate the socket strips retractable, made of aluminium extruded profile, coated black with strain anchor and insertion plates to integrate the socket strip (vertical or tilted 15°) affixed to the table top.
Cable holder under the table top without hook and loop fastener anodised aluminium profile with clipped-on polypropylene cable clips.
Cable holder under the table top with hook and loop fastener anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop straps attached.
Cable outlet in the table leg
Textile sleeving for cables elastic, polyester
130
660 range Travis Design: wiege
Technical details Function Modular pedestal table system for creating static table configurations and stand-alone tables to suit preferences. For traditional conference and executive areas, where wide table spans, special table formats and shapes, as well as perfect multi-media integration are required.
Frame Cast aluminium T-shaped base, bright chrome plated or in silver satin finish, or black coated. Disc base in steel with a stainless steel covering, high-lustre polished or brushed finish. T-shaped base in steel tubing, bright chrome plated or in silver satin finish, or black coated. Column optionally has a duct for the power supply. Crossbeam with five mounting grooves in extruded aluminium profile, coated in silver satin finish, or black. End closures and pivoting mechanism for attachment to table columns in die-cast aluminium in the same colour as the crossbeam. Table top bearers in die-cast aluminium coated to match the crossbeams in silver satin finish, or black, for attaching the table top; the table top bearers are infinitely positionable within the crossbeam and include plastic devices for levelling out differences in heights when mounting the table top. Black polyamide glides, optionally with felt inserts (for hard floorings). The T‑shaped base has colour-matched caps in stainless steel.
Core material of table top Particle board, depending on the surface finish with straight, colourmatched plastic lipping or with straight, colour-matched wood lipping. MDF (medium-density fibreboard) only in conjunction with veneer with colour-matched, chamfered wood lipping. For system elements: straight joining edge.
Table top group 1 - laminate on the top and bottom Table top 26 mm (1“) thickLaminate from the Wilkhahn colour and surface samples with plastic lipping, colour matched with the surface. (Only straight edges possible!) Table top group 2 - veneer on the top and bottom Table top thickness 26 mm (1⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples (exception: natural ash not possible with chamfered lipping) with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple (exception: natural maple not possible with chamfered lipping), elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer. Further surfaces for the formats shown in the price list are available on request.
131
Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Maple and beech veneer. Some specific growth features possible.
Single table portal Portal with brushed profile the same colour and material as the table top on both sides. The cut-out section with real wood lipping, as far as possible in the same colour as the table top. Hinges can be opened to 180°. Single table portal: 350 x 150 mm (13¾" x 5⅞") or 300 x 150 mm (11¾" x 5⅞").
Please remember that for barrelshaped, open-centre table con figurations and U‑shaped table configurations with a bullnose double edge profile, the inside edges always have a straight profile.
Standards The Travis tables comply with the ANSI / BIFMA X 5.5 standard.
Further configurations on request.
Edge profiles Chamfered Straight
Frame versions 51 53 54 60
T‑shaped base bright chrome plated T‑shaped base coated, colour black T‑shaped base bright chrome plated T‑shaped base coated silver satin finish
64 Disc base brushed 72 Disc base high-lustre polished 74 Disc base high-lustre polished
132
Bullnose double
Table column
Crossbeam and table top bearer
Coated silver satin finish or black Coated black Bright chrome plated Coated, silver satin finish
Coated silver satin finish or black Coated black Coated silver satin finish or black Coated, silver satin finish
Coated silver satin finish or black Coated silver satin finish or black Bright chrome plated
Coated silver satin finish or black Coated silver satin finish or black Coated silver satin finish or black
Veneer variation 2 Chamfered edge
661/62 T‑shaped base, aluminium and column steel tube coated
Table top group 2 2 Veneer variation 2 Straight/bullnose double edge
Barrel-shaped 120 x 280, H 73 (47¼" x 110¼", H 28¾")
2 Veneer variation 1 Chamfered edge
661/6 T‑shaped base, aluminium and column steel tube coated
2 Veneer variation 1 Straight/bullnose double edge
Rectangular 120 x 280, H 73 (47¼" x 110¼", H 28¾")
1 Laminate Straight edge
Travis Tables
€
€
€
€
€
3012
3540
3753
4018
4231
3003
3489
3694
3967
4172
€ Additional charges/reduced prices specific to range
T‑shaped base, aluminium bright chrome plated, column steel tube coated T‑shaped base aluminium and column steel tube bright chrome plated
444 505
Disc base steel with cover stainless steel brushed,column steel tube coated Disc base steel with cover stainless steel, high-lustre polished; column steel tube, coated Disc base steel with cover stainless steel, high-lustre polished; column steel tube, bright chrome plated
575 697 758
133
Veneer variation 2 Chamfered edge
Table top group 2 2 Veneer variation 2 Straight/bullnose double edge
2 Veneer variation 1 Chamfered edge
2 Veneer variation 1 Straight/bullnose double edge
1 Laminate Straight edge
Travis Solid table configurations
€
€
€
€
€
4784
5658
6180
6351
6873
444
444
444
444
444
505
505
505
505
505
575
575
575
575
575
697
697
697
697
697
758
758
758
758
758
Barrel-shaped 80/120 x 360, H 73 (31½"/47¼" x 141¾", H 28¾")
662/40 Table configuration for 10 – 12, Comprising 2 segments, T‑shaped base, aluminium and column steel tube coated Additional charges T‑shaped base, aluminium bright chrome plated, column steel tube coated T‑shaped base aluminium and column steel tube bright chrome plated Disc base steel with cover stainless steel brushed,column steel tube coated Disc base steel with cover stainless steel, high-lustre polished; column steel tube, coated Disc base steel with cover stainless steel, high-lustre polished; column steel tube, bright chrome plated
134
661 range Travis height-adjustable
Technical details Function Electrically height-adjustable tables complement the modular Travis table range. The seating height is infinitely adjustable from a minimum of 71 cm to a standing height of 118 cm max. Pressing the button makes the switch between sitting and standing at the table simple. In terms of ergonomics, changing posture at conferences and desks is advisable and this feature makes it easy.
Frame Steel, T-shaped base, bright chrome plated or in silver satin finish, or black coated. Telescopic steel table column, bright chrome plated, or in silver satin finish, or black coated; telescopic section always chrome plated. Steel crossbeam, in silver satin finish, or black coated. Underframe facings at the front edges are the same as the table column’s surface finish. Black polyamide glides, optionally with felt inserts (for hard floorings). Frame electrically height adjustable from 71 to 118 cm, supply cable 300 cm, 150 cm of which has a black fabric sheath. Core material of table top Particle board, depending on the surface finish with straight, colourmatched plastic lipping or with straight, colour-matched wood lipping. MDF (medium-density fibreboard) only in conjunction with veneer with colour-matched, chamfered wood lipping.
Table top group 1 - laminate on the top and bottom Table top 26 mm (1“) thickLaminate from the Wilkhahn colour and surface samples with plastic lipping, colour matched with the surface. (Only straight edges possible!) Table top group 2 - veneer on the top and bottom Table top thickness 26 mm (1⅜") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples (exception: natural ash not possible with chamfered lipping) with wood lipping, as far as possible in the same colour as the veneer. Variation 2: Maple (exception: natural maple not possible with chamfered lipping), elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same colour as the veneer.
Standards The Travis tables comply with the DIN 147 technical report and DIN EN 527, as well as the GS requirements.
Please note The height-adjustable Travis tables (661 range) cannot be linked with one another or combined with Travis (660 range).
Further surfaces for the formats shown in the price list are available on request. Veneer types As a standard, the veneers are made by slip-match method. Surfaces sealed with clear lacquer: open pore: Oak, ash, walnut and elm veneer, as well as Wilkhahn Mocca veneer Closed-pore: maple and beech veneer. Maple and beech veneer. Some specific growth features possible.
Edge profiles Chamfered Straight
Frame versions 51 T‑shaped base bright chrome plated 53 T‑shaped base coated, colour black 54 T‑shaped base bright chrome plated 60 T‑shaped base coated silver satin finish
Bullnose double
Telescopic table column
Crossbeams
Under-frame facings
Coated silver satin finish or black Coated black
Coated silver satin finish or black Coated black
Bright chrome plated
Bright chrome plated
Coated silver satin finish or black Coated, silver satin finish
Bright chrome plated
Coated, silver satin finish
Coated black
Coated, silver satin finish
135
661/41 Electrically height adjustable (71 – 118 cm (28" – 46½")) T‑shaped base and table column coated Additional charges Chrome-plated T‑shaped base and coated table column Chrome-plated T‑shaped based and chrome plated table column
Barrel-shaped 80/100 x 230, H 71 – 118 (31½"/39⅜" x 90½", H 28"‑46½")
661/92 Electrically height adjustable (71 – 118 cm (28" – 46½")) T‑shaped base and table column coated Additional charges Chrome-plated T‑shaped base and coated table column Chrome-plated T‑shaped based and chrome plated table column
136
Veneer variation 2 Chamfered edge
Rectangular 100 x 200, H 71 – 118 (39⅜" x 78¾", H 28" – 46½")
Table top group 2 2 Veneer variation 2 Straight/bullnose double edge
Additional charges Chrome-plated T‑shaped base and coated table column Chrome-plated T‑shaped based and chrome plated table column
2 Veneer variation 1 Chamfered edge
661/41 Electrically height adjustable (71 – 118 cm (28" – 46½")) T‑shaped base and table column coated
2 Veneer variation 1 Straight/bullnose double edge
Rectangular 90 x 180, H 71 – 118 (35⅜" x 70⅞", H 28" – 46½")
1 Laminate Straight edge
Travis height-adjustable Tables
€
€
€
€
€
1854
2170
2487
2296
2613
276
276
276
276
276
414
414
414
414
414
1902
2300
2649
2438
2787
276
276
276
276
276
414
414
414
414
414
1911
2361
2703
2502
2846
276
276
276
276
276
414
414
414
414
414
830 range Cubis
Design: wiege, Klaus Franck, Werner Sauer
Technical details Function Cube-shaped armchairs and up holstered benches with backrests, as well matching tables with wooden tops for use in informal meeting environments, such as reception areas, lobbies and foyers.
Armchairs and upholstered benches with backrest Frame Oval aluminium hollow profile, bright chrome plated, clear or black anodized, or coated. Underside of glides in polyurethane for soft and hard floors. Seat and back Seat, backrest and side sections are solid, cushioned beech frames. Back section with flexible upper edge. Foam composite upholstery with fibre fleece underlay.
Table Frame Oval aluminium profile, bright chrome plated, clear or black anodized, or coated. Black polyurethane glides. Core material of table top Birch plywood. Table top group 1 – laminate Table top thickness 42 mm (15/8") Laminate according to Wilkhahn colour and surface finish samples. Moulded plywood edge profile, natural oiled finish.
Standards Cubis armchairs and settees conform to ANSI / BIFMA X 5.4. Cubis tables conform to ANSI / BIFMA X 5.5. Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Table top group 2 – veneer Table top thickness 42 mm (15/8") Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples. Chamfered edging, as far as possible in the same colour as the veneer. Variation 2: Maple, elm or walnut veneer, as well as Wilkhahn veneer Mocca according to Wilkhahn woodstain colour samples. Chamfered edging, as far as possible in the same colour as the veneer. Veneer version As a standard, the veneers are slip-matched onto the table top. Surfaces sealed with clear lacquer: Open-pore: oak, ash, walnut and elm veneer, as well as Wilkhahn veneer Mocca. Closed-pore: maple and beech veneer. Some specific growth features possible.
Frame versions
Frame 51 53 60 62 63
Bright chrome plated Coated black Coated, silver satin finish Clear anodized Black anodized
137
Cubis Armchairs and upholstered benches with backrests
54
Upholstery material 60 74 87 62 63 66 67 69
€
€
€
€
1707
1836
2816
3410
1770
1905
2911
3527
832/5 Frame aluminium coated
2493
2695
4272
5103
833/5 Frame aluminium coated
2833
3061
5039
6013
Armchair ¡ 43 ¶ 73 ¢ 69 | 74 (¡ 16⅞" ¶ 28¾" ¢ 27⅛" | 29⅛")
831/5 Width 69 cm (27⅛") Frame aluminium coated
Armchair ¡ 43 ¶ 73 ¢ 74 | 74 (¡ 16⅞" ¶ 28¾" ¢ 29⅛" | 29⅛")
831/51 Width 74 cm (29⅛") Frame aluminium coated
Upholstered bench with backrest ¡ 43 ¶ 73 ¢ 124 | 74 (¡ 16⅞" ¶ 28¾" ¢ 48⅞" | 29⅛")
Upholstered bench with backrest ¡ 43 ¶ 73 ¢ 154 | 74 (¡ 16⅞" ¶ 28¾" ¢ 60⅝" | 29⅛")
€ Additional charges/reduced prices specific to range
138
Frame aluminium anodized Frame aluminium bright chrome plated
99 256
Cubis Low tables
Variation 2
€
€
€
830/10 60 x 60, H 40 (23⅝" x 23⅝", H 15¾") Frame aluminium coated
714
742
799
830/14 60 x 90, H 40 (23⅝" x 35⅜", H 15¾") Frame aluminium coated
827
855
939
Laminate Low table
Low table
Table top group 2 2 Variation 1
1
€ Additional charges/reduced prices specific to range
Frame aluminium anodized Frame aluminium bright chrome plated
43 127
139
850 range Velas
Design: Eric Degenhardt
Technical details Function Lightweight and stylish lounge chair with footstool and side table for furnishing lounges, lobbies, receptions, informal meeting areas and homes.
Frame Frame combines sections in diecast aluminium, with stretcher and front legs in steel tube, bright chrome plated or coated in black or white. Frame tensioned by bracket in curved, low-profile steel coated to match the black or white coated frame or in silver satin finish in the case of a bright chrome plated frame. The standard version for carpeted floors is with glides at the front; optionally available with additional glides at the rear for hard or soft floors, on request with felt insert.
Seat and back Unitary seat and back frames in slim, flat steel tube contained within a 2‑ply seamless cover using 3‑D shaped knitting technology in high-performance polyester in red, green, dark blue, dark brown, dark grey or black. Softness enhanced with cut foam padding. Foot stool Butt leather cover in dark brown and black, plywood core material. Die-cast aluminium frame, stool legs made of solid steel, obtainable either bright chrome plated, or coated in black or white. Standard glides for carpets, or optionally with felt inserts. Side table Veneer surface in natural ash, natural oak (table top group 2, variation 1) or walnut (table top group 2, variation 2), multiplex core material. Frame: steel flange, coated in black or white, solid steel table legs, obtainable bright chrome plated, or coated in black or white. Standard glides for carpets, or optionally with felt inserts.
140
Standards Velas lounge chair: DIN EN 1022
Upholstery material
Velas
€ Lounge chair ¡ 32 ¶ 81 ¢ 63 | 80 (¡ 12⅝" ¶ 31⅞" ¢ 24¾" | 31½")
Stool
850/1 With cover using 3‑D seamless, shaped knitting technology Frame coated
973
Additional charge Frame bright chrome plated
138
851/3 61 x 43, H 40 (24 x 16⅞", H 15¾") With butt leather cover Frame coated
575
Additional charge Frame bright chrome plated
Table top group 2 2 Veneer variation 1
Veneer variation 2
Low table
Low table
8
€
€
853/1 Ø 45, H 40 (Ø 17¾", H 15¾") Frame coated
315
339
Additional charge Frame bright chrome plated
6
6
141
860 range Asienta
Design: Jehs + Laub
Technical details Function Upholstered chairs and benches with backrests, benches without backrests, as well as matching tables for use in informal conference areas, such as for example prestigious lobbies, executive offices, in exclusive clubs or homes.
Upholstered chairs, upholstered benches with backrests and benches without backrests Frame Die-cast aluminium legs, optionally black or white coated, bright chrome plated or with a chrome, matt-polished finish. Surrounding under frame made of aluminium- extruded profile to match the legs. Black, multi-purpose glides made of plastic for all types of flooring. Seat and back Leaf-sprung seat made of multiplex and solid wood (beech / birch). Back and side sections made of multiplex birch with flexible upper edge due to wide foam inserts that are cover ed with an elastic fabric. The cushioning is made of cut foam with extra padding.
Tables Frame Die-cast aluminium legs, optionally black or white coated, bright chrome plated or with a chrome, matt-polished finish. Under frame made of aluminium-extruded profile to match the legs. Tabletops MDF board (medium density fibreboard), 25 mm (1") or single-pane reinforced glass, 10 mm (⅜"), boards are each placed flush with the under frame. Tabletop group 2 – veneer Tabletop thickness 25 mm (1") Variation 1: Beech, oak and ash veneer according to Wilkhahn woodstain colour samples with wooden lipping, as far as possible tocolour-match the veneer. Variation 2: Maple, walnut or elm veneer, as well as Wilkhahn mocca veneer with wood lipping, as far as possible in the same colour as the veneer. Closed-pore: maple and beech veneer. Some specific growth features possible. Tabletop group 11 – glass Tabletop thickness 10 mm (⅜") Single-pane reinforced glass optionally coated in opaque white or black, edges polished.
Frame versions
142
49 51 53 76
Coated signal white Bright chrome plated Coated black Chrome, matt-polished finish
Standards The Asienta upholstered chairs and upholstered benches with and without backrests comply with the DIN EN 16139-L1 and ANSI / BIFMA X 5.4 standards.
Upholstery material
Asienta Armchairs and upholstered benches with backrests
Armchair ¡ 44 ¶ 72 ¢ 70 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 27½" | 27⅛")
861/5 Width 70 cm (27½") Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
Armchair ¡ 44 ¶ 72 ¢ 78 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 30¾" | 27⅛")
861/6 Width 78 cm (30¾") Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
Upholstered bench with backrest ¡ 44 ¶ 72 ¢ 150 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 59" | 27⅛")
862/5 2‑seater Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
Upholstered bench with backrest ¡ 44 ¶ 72 ¢ 218 | 69 (¡ 17⅜" ¶ 28⅜" ¢ 85⅞" | 27⅛")
863/5 3‑seater Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
60 66 67
74
87
€
€
€
1896
2539
3288
225 398
225 398
225 398
2033
2773
3596
225 398
225 398
225 398
2754
3639
4817
350 588
350 588
350 588
3854
4925
6532
403 670
403 670
403 670
143
Upholstery material
Asienta Benches
Bench ¶ 44 ¢ 144 | 69 (¶ 17⅜" ¢ 56¾" | 27⅛")
864/3 2‑seater Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
Bench ¶ 44 ¢ 215 | 69 (¶ 17⅜" ¢ 84⅝" | 27⅛")
865/3 3‑seater Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
144
60 66 67
74
87
€
€
€
1568
2184
2785
321 541
321 541
321 541
1975
2566
3821
385 635
385 635
385 635
Low table ¶ 40 ¢ 65 | 65 (¶ 15¾" ¢ 25⅝" | 25⅝")
Low table ¶ 40 ¢ 120 | 60 (¶ 15¾" ¢ 47¼" | 23⅝")
Low table ¶ 40 ¢ 120 | 120 (¶ 15¾" ¢ 47¼" | 47¼")
860/1 Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
860/2 Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
860/3 Frame coated Additional charges Frame bright chrome plated Frame with chrome, matt-polished finish
2
2
11
Veneer variation 1
Veneer variation 2
Glass
Table top group
Asienta Low tables
€
€
€
1283
1332
1122
198 344
198 344
198 344
1391
1434
1337
244 420
244 420
244 420
1605
1691
1819
296 505
296 505
296 505
145
890 range Cana
Design: wiege, Fritz Frenkler, Justus Kolberg
Technical details Function Versatile uphostered bench with backrest, which may be used as a two seater (with armrests folded down), as a three seater (with armrests folded up) or as a lounger (with seat pulled out). For use in informal meeting environments, such as receptions, foyers, lobbies, single offices or homes. Folded down, armrests may be used as side tables.
Frame Steel tube, backrest frame and hinges in aluminium, coated, silver satin finish. Black, adjustable polyamide glides for soft and hard floors.
Seat Solid beech frame, lacquered in black, with elasticated membrane. Seat can be pulled out from 78 cm (30¾") to 90 cm (35⅜"). Cushioning with wool fleece overlay.
Please note: The prices for types with cushioning that includes fabrics and leather provided by the customer are given on request.
Upholstery material 60 74 87 67
Cana
Upholstered bench with backrest/lounger ¡ 42 ¶ 85 ¢ 200 | 78/90 (¡ 16½" ¶ 33½" ¢ 78¾" | 30¾"/35⅜")
146
Armrests and backrests Maple, beech or walnut veneered laminboard with concealed solid beech lipping, natural finish. Cushioning with wool fleece overlay. Armrests fold up.
890/6 Armrests and backrests beech veneer Additional charge Maple or walnut veneer
€
€
€
3562
4482
5038
292
292
292
Quickship programme
Quickship There are cases where short delivery periods are very important to the customer. Which is why Wilkhahn produced an express delivery programme called Quickship to deliver to their customers within eight working days after receipt of order. The Quickship models are pre-produced and are therefore only available in the designs and quantity specified. For project business, the Quickship Project programme provides models available in quantities of 20 maximum and the standard Quickship programme offers a maximum of five task and visitor chairs.
147
Quickship Project Delivery period Up to 20 of each model ex works within 8 working days
€ ON® Task chair ¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
55174/7 With seat cushion, With 3‑D armrests, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated black swing plates
734
ON® Task chair ¡ 40/52 ¶ 97/109 ¢ 69 | 66 (¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
55174/8 like 174/7, but with seat-depth adjustment (approx. 400 to 450 mm) With seat cushion, With 3‑D armrests, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Plastic star base, aluminium-coated black swing plates
810
ON® Task chair ¡ 40/52 ¶ 105/117 ¢ 70 | 66 (¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")
55175/71 Seat and back with management grade upholstery, with upholstered, leather-covered 3D armrests, Upholstery material leather 74/99, Headrest in the same material as the upholstery, Infinitely variable height adjustment, Adjustment of backrest height (up to 60 mm (2⅜")), Trimension, tension control Bright chrome plated aluminium star base and swing plates
ON® Cantilever chair ¡ 43 ¶ 92 ¢ 61 | 60 (¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")
55178/7 With seat cushion, Stackable 5‑high free-standing, Backrest covered in Fiberflex fabric, Upholstery material 35/99 Fiberflex, Polypropylene armrests Frame bright chrome plated
148
2610
470
Quickship Project Delivery period Up to 20 of each model ex works within 8 working days
€ Neos task chair ¡ 40/52 ¶ 92/104 ¢ 66 | 64 (¡ 15¾"/20½" ¶ 36¼"/41" ¢ 26" | 25¼")
55181/71 With 3‑D armrests, Adjustment of backrest height and seat depth, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Lockable backrest, Frame polyamide, Castors hard or soft, Fabric 47/10
520
Stitz ¶ 65/90 ¢ 31 (¶ 25⅝"/35⅜" ¢ 12¼")
55201/2 Seat surface leather 74/99 embossed, Frame black
550
Aline ¡ 44 ¶ 78 ¢ 54 | 58 (¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")
55230/1 Multi-purpose chair, up to 15-high free-standing, Seat an backrest frame and upholstery in black, Glides, hard or soft
346
Aline ¡ 44 ¶ 78 ¢ 59 | 58 (¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")
55230/2 Multi-purpose chair, up to 15-high free-standing, With armrests, Seat an backrest frame and upholstery in black, Glides, hard or soft
386
149
Quickship Delivery period Up to 5 of each model ex works within 8 working days
€ Sito cantilever chair ¡ 42 ¶ 85 ¢ 57 | 56 (¡ 16½" ¶ 33½" ¢ 22½" | 22")
55241/3 Medium-height backrest, With seat and back cushion, Polypropylene armrests, Frame bright chrome plated, Anti-tilt stoppers for carpet, stackable version, Fabric 54/13
Modus Compact task chair ¡ 42/53 ¶ 106/117 ¢ 64 | 61 (¡ 16½"/20⅞" ¶ 41¾"/46⅛" ¢ 25¼" | 24")
55274/7 High backrest, With seat cushion, Backrest with non-transparent material, With armrests, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Frame aluminium bright chrome plated, Castors hard or soft, Fabric 69/99
1512
Modus Executive task chair ¡ 42/53 ¶ 112/123 ¢ 68 | 65 (¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 25⅝")
55284/81 High backrest, Seat and backrest with slim, leather-covered cushion, Infinitely variable height adjustment, Automatic synchro-adjustment, tension control, Armrests aluminium bright chrome plated with leather pad, Frame aluminium bright chrome plated, Castors hard or soft, Leather 74/99
3738
150
690
33 mm (11⁄4") E1-2 Bullnose double edging with impact-resilient profile, concealed lipping
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E2-1 Bullnose double wood edging
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E2-2 Bullnose double wood edging with impact-resilient profile
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E2-3 Straight plastic edging
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E1-3 Straight edging, concealed lipping
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E1-4 Straight edging with impactresilient profile, concealed lipping
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E2-4 Chamfered wood edging, 4 mm (1⁄8“) radius
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") Concealed lipping is oversailing veneer Visible lipping is pre-glued lipping Key to symbols 1 Standard type 1 Special type (only after clarification with INP project manager) – Not possible
E2-5 Chamfered wood edging, 12 mm (1⁄2")
38 mm (11⁄2")
19 mm (3⁄4") 25 mm (1") 33 mm (11⁄4") E2-6 wood lipping symmetrically curved
38 mm (11⁄2")
660 Travis
25 mm (1")
640 Palette
19 mm (3⁄4")
620 Logon
38 mm (11⁄2")
614 Timetable Shift
The edging matrix indicates which edgings can or cannot be made in the different surface finishes and thicknesses, or require prior clarification.
E1-1 Bullnose double edging, concealed lipping
612 Timetable Smart
33 mm (11⁄4")
ilkhahn has more than 135 differW ent types of wood-based table tops to choose from, available as standard and special versions.
610 Timetable
25 mm (1")
600 Conversa
19 mm (3⁄4")
544 Concentra
Table top thickness
300 Graph
Edging matrix.
440 Confair
Laminate
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – 1 –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– 1 – –
1 – – –
1 – – –
– 1 – –
– 1 – –
– 1 – –
– 1 – –
– – – –
– 1 – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – 1 1
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– Edging always oiled – Edging varnished in the same colour as the table top finish, only available as a customised solution with concealed lipping
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
300 Graph
440 Confair
544 Concentra
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
300 Graph
440 Confair
544 Concentra
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
300 Graph
440 Confair
544 Concentra
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
Varnished
440 Confair
Direct coating
544 Concentra
Linoleum
300 Graph
Veneer
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – 1 –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – 1 –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– 1 – –
– 1 – –
– 1 – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
1 – – –
1 – – –
– 1 – –
– 1 – –
– 1 – –
– 1 – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
1 – – –
1 – – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – 1 1
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – 1 1
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– 1 1 –
– – – –
– – – –
– 1 1 –
– 1 – –
– 1 – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– 1 – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– – – –
– Table top and edging always stained and varnished in the same colour
2
– Edging oiled with concealed lipping
Notes
Notes
Delivery and Payment Conditions for International Sales 1 General. 1.1 These conditions form an integral part of all our offers and contracts, also in current or future business relationships. They take precedence over any conflicting contractual documents, draft agreements, or terms and conditions of the customer. 1.2 All deviating provisions must be agreed upon in writing and signed by both parties in order to be valid. Notices given or declarations made with respect to individual contracts may also be sent by email. 1.3 If we use terms such as DAP, FCA, FOB, CFR, or CIF for the respective order, they shall have the meaning assigned to them in the ICC INCOTERMS 2010; these provisions apply correspondingly to domestic sales. 2 Ordering. 2.1 Our offers are in general non-binding. A contract is not made until the order is confirmed by us. Contracts are normally conditional upon the transaction being covered by trade credit insurance or upon security, such as a bank guarantee, being provided for our claims. This applies also if we confirm an order without reservations. A contract is deemed made when the customer accepts the delivery, at the latest. 2.2 Contracts (orders) are binding and cannot be changed. If change requests are made after the order has been confirmed, we may submit a new offer; in general the customer will be charged for any additional costs. The new offer is accepted when the customer accepts the delivery that is in conformity with the customer’s change requests, at the latest. 2.3 By placing an order, the customer warrants that he is solvent and/or of sound financial standing. If we are in doubt, in particular if we receive an adverse notice from a credit insurer after the contract has been entered into, we may choose not to perform the contract or ask to be provided with adequate security or demand advance payment within 4 working days. If this period of time expires to no avail, we may rescind the contract. In the event that the customer fails to provide the contractually agreed-upon security or if he does not provide the security in full (e.g., if he makes only 50 % of the advance payment) within the periods of time agreed upon, we hereby rescind the contract. In the event that the contract is rescinded, we have the right to claim damages, in particular the cost of procuring raw materials and semi-finished products that cannot be used for another purpose. Delivery; Default of Acceptance. 3 3.1 The delivery will be carried out in accordance with the delivery conditions set forth in the offer or in the order confirmation. 3.2 The customer will be in default of acceptance and have to pay reasonable storage costs if he fails to collect the goods or have them collected or forwarded within two weeks after notice has been given that the goods are ready for shipment. In the event of default of acceptance, we may claim damages in an amount equal to 0.5 % of the order value per week, limited to a maximum of 15 % of the order value in total; this does not exclude a larger claim for damages if we can prove that the damage actually suffered is larger. The customer may prove to us that no damage was suffered or that the damage actually suffered is smaller than the asserted claim for damages. 3.3 The customer has to bear the cost of any fast freight or express delivery made at the customer’s request. 4 Quality of the Goods; Samples. 4.1 The quality parameters are stipulated exclusively by the order confirmation. In general, the goods comply with the standards that apply in the European Union; if different standards are to be applied, the customer must so advise us before the contract is entered into. To the extent that reference is made to information contained in brochures when the order is placed, such information is normally to be understood as an example only. 4.2 With natural materials, such as wood or leather, as well as with fabrics, surfaces and linoleum, the customer accepts that any descriptions, illustrations Wilkhahn Wilkening + Hahne GmbH + Co. KG Company registration: Amtsgericht Hannover HRA 100144
or samples, in particular sample or pattern cards, can only be examples due to the natural and/or typical variations in quality. 4.3 Please be advised that surfaces are subject to wear by normal use during the warranty period. 4.4 If samples are provided, the customer has the same duty of care as with items provided on a loan basis. The customer may keep the samples for a maximum of two months and must return them unasked, at his own expense. 5 Delivery Period; Request for Delivery. 5.1 In the event of delays that are due to force majeure, industrial action, official acts, and business interruptions through no fault of our own, the delivery period will be appropriately extended. The same applies to delays that are due to export restrictions or in the event of acts of war or terrorism in a transit country or in the country of destination. If we prove that we have chosen our supplier carefully and this supplier fails to supply us as agreed, the delivery period will also be extended for the delay so incurred if we cannot reasonably be expected to make a replacement purchase. 5.2 Our failure to meet delivery dates or delivery periods will only entitle the customer to assert remedies after a reasonable additional time period of at least 21 working days has expired. In the event of default due to slight negligence, our liability for damages will be limited on the merits to the additional cost of a replacement purchase; in terms of the amount, it will be limited to 0.5 % of the order value concerned by the default for each entire week of default, up to a maximum of 5 % of the order value concerned. 5.3 We may deliver ahead of schedule and make partial deliveries unless this places the customer at an unreasonable disadvantage. If, contrary to what has been agreed upon, the customer does not collect the goods or have them collected or forwarded, we have the right after the expiry of a period of 2 weeks to invoice the customer for the goods and demand storage fees. 6 Prices. 6.1 Our prices do not include freight, customs duties, taxes, and other fees (e.g., certification costs) that may be incurred; these will be charged to the customer additionally. We will invoice the customer for special packaging – e.g., if the customer requests particular lot sizes – at cost price. 6.2 If it is agreed that the goods are to be delivered directly to the end user, we will charge freight plus a reasonable handling surcharge. 7 Payment. 7.1 Our invoices are denominated, and have to be paid, in euros; currency risks are borne by the customer. Making deductions is not allowed. If the time allowed for payment is exceeded, we may charge 12 % interest, subject to further damage. 7.2 All payments must be received such that the amount is credited to our bank account by the due date. Incoming payments will be applied to the outstanding receivable that has been due longest, irrespective of the customer’s payment instructions, if any. 7.3 Upon default of payment, we may combine all quantities of goods yet to be supplied in a single delivery and make such delivery contingent upon the payment of all invoices due and on an advance payment on the invoices yet to be paid. We may further demand immediate payment of all receivables outstanding at the time of default, for whatever legal reasons and, in particular, under whatever contract, and terminate any agreements concerning payment in installments. Until all outstanding receivables have been paid, we have the right to retain any goods not yet supplied or other services yet to be provided. 8 Warranty for Defects. 8.1 The customer must, without undue delay, carry out a thorough examination of the products supplied; for this purpose, he must examine the entire delivery. The examination must, in particular, include a visual examination of the surfaces. Any defects must be reported to us without Sole fully liable partner: Wilkhahn Einrichtungs GmbH 31844 Bad Münder Company registration: Amtsgericht Hannover HRB 100070
undue delay, but in any case within 4 working days after delivery. If an examination does not occur or the defects are not reported, the customer will forfeit all his warranty claims. 8.2 If we bear the transport risk in particular cases, any damage in transit must be confirmed by the carrier upon delivery. If the carrier has not been instructed by us, the customer assigns any and all claims against the carrier to us and delivers to us all the documents that are required to enforce such claims; we hereby accept this assignment. 8.3 Warranty claims for defects become time-barred within two years of the delivery (limitation period). The running of the limitation period will be suspended for the duration of subsequent performance (i.e., replacement delivery or repair); the customer cannot demand upon completion of the subsequent performance that the limitation period start all over again. 8.4 Warranty claims for defects will only exist for defects that are contained in the products manufactured by us upon delivery; this does not, however, apply to materials that have been provided to us by the customer or third parties. 8.5 We will primarily carry out the subsequent performance – where appropriate, with the assistance of third parties – at the customer’s place of business, even if we are aware of the final destination of the consignment, or reduce the purchase price appropriately. We may choose at our discretion, within a reasonable period of not less than 14 days, between subsequent performance – replacement delivery or repair – and a reduction of the purchase price. If the subsequent performance repair is to be carried out at a place other than the customer’s place of business, e.g., at the place of business of the end user, we will invoice the customer for the additional costs thereby incurred. 8.6 If the subsequent performance fails, the customer may rescind the contract, reduce the purchase price, or claim damages. A right to rescind the contract will only exist for defects that affect 30 % of the consignment or eliminate the functionality of the goods supplied. 8.7 The customer is not authorized to return any goods without our express approval. If complaints about defects are unjustified, we may invoice the customer for the cost of examining the defect. 9 Retention of Title. 9.1 The goods remain our property until the customer has paid all claims arising from the business relationship, including future claims and, in particular, any current account balance, or until all bills of exchange and checks that were delivered in payment have been honored. 9.2 Furthermore, the goods remain our property if and to the extent that we assume an obligation to third parties on behalf of the customer until such obligation ceases to exist. 9.3 The customer may sell the goods only in the ordinary course of business; he is not authorized to pledge the goods or transfer them by way of security. To the extent permitted by law, the following provisions apply additionally: if the goods are sold or otherwise made available to third parties, the customer hereby assigns to us all financial and other claims accruing to him. The customer is authorized to collect such claims; in the event of default of payment, this right will be forfeited immediately. 9.4 If the value of the security provided to us exceeds our claims by more than 20 %, we will be obligated to release part of the security upon request. If the customer resells the goods, he must retain title to such. To the extent permitted by law, the following provisions apply additionally: any processing and/or machining of the goods will be done on our behalf and for us, but without any obligation or liability arising from such on our part. If the goods supplied by us are mixed or combined with other items, the customer hereby assigns to us his ownership or coownership rights to the mixed inventory or new item in proportion to the value of our goods. 9.5 The customer is obligated to take out the usual insurance for the goods or include them in any existing insurance policies and hereby assigns to us all of his rights against the insurer. 9.6 The customer is obligated to notify Management: Dr. Jochen Hahne
us immediately of any attachment of goods that are subject to this retentionof-title clause or of claims that have been assigned to us. The customer bears the cost of any intervention. 9.7 If the enforcement of the above rights requires formal acts, such as the registration of the goods, under applicable law, the customer is obligated to so advise us and assist us in performing these acts. Should individual provisions of this retention-of-title clause be invalid under applicable law, such provision as is permissible under applicable law and comes closest to the invalid provision shall be deemed agreed upon. 10 Designs; Protection of Designs and Models. 10.1 With designs or similar contracts, the following provisions apply: until the price has been paid in full, the customer is prohibited from using – e.g., copying or communicating to the public – any designs or concepts that have been created for the customer (irrespective of whether or not they qualify as copyrightable works). We retain all ownership rights and rights of use in respect of illustrations, drawings, sketches, collections, and other records that are made available to the customer; such must be returned to us upon request. 10.2 We are the sole owner of all right, title, and interest in and to any forms, samples, and technical solutions in respect of or in connection with the goods. The customer is prohibited from reproducing, having reproduced, or participating in the distribution of reproduced goods, irrespective of whether we are entitled to industrial property rights and, if so, to what extent. If the customer violates this prohibition, he will be liable to pay a contractual penalty in an amount of EUR 100,000 for each willful or negligent violation; this does not affect any claims for damages to which we may be entitled. We may further exercise any rights to demand that the customer refrain from reproduction, which we may also enforce by obtaining a temporary restraining order. 11 Liability. Claims for damages by the customer which are not based on the violation of material contractual obligations, willful misconduct or gross negligence, or bodily injury are excluded to the extent permitted by law. If excluding such claims is not permissible, they shall be limited to a maximum amount of damages of EUR 2 million. The customer will be fully entitled to any claims for damages which are based on the violation of material contractual obligations, willful misconduct or gross negligence, or bodily injury. To the extent that the law applicable to general terms and conditions allows a further limitation of our liability, such limitation of liability shall be deemed agreed upon. 12 Miscellaneous. 12.1 This agreement shall be governed by German law, with the exception of the law applicable to general terms and conditions. In this respect, the laws that apply in the customer’s jurisdiction shall apply. 12.2 The place of performance for the delivery and payment is 31848 Bad Münder (urban district: Eimbeckhausen), Germany. 12.3 The place of jurisdiction for all disputes with an amount in controversy of up to EUR 150,000 that arise directly or indirectly from the contractual relationship, including disputes arising from or in connection with bills of exchange or checks, is Hameln, Germany. We may also sue the debtor at the debtor’s general place of jurisdiction. Disputes with an amount in controversy of over EUR 150,000 will be finally settled by the court of arbitration at the Hamburg Chamber of Industry and Commerce in accordance with its rules of procedure, as amended from time to time, and the German Code of Civil Procedure (ZPO). There will be three arbitrators. The language of the arbitral proceedings will be English, except in disputes with customers who are based in Austria or Switzerland (in this case, the language of the arbitral proceedings will be German). The place of arbitration is Hamburg, Germany. August 2013 Administrative Board: Jörg Glaser-Gallion (Chairman)
www.wilkhahn.com
Wilkhahn Wilkening + Hahne GmbH+Co. KG Fritz-Hahne-Straße 8 31848 Bad Münder Germany Tel. + 49 (0) 5042 999-0 Fax + 49 (0) 5042 999-226
[email protected] www.wilkhahn.de
Australia Wilkhahn Asia Pacific Head Quarters Wilkhahn Forum Sydney A2, Alexandria Industrial Estate 46 - 62 Maddox Street Alexandria NSW 2015 Tel. + 61 2 9310 3355 Fax + 61 2 9319 5655
[email protected] www.wilkhahn.com.au Wilkhahn Forum Brisbane 2/40 Douglas Street Milton QLD 4064 Tel. + 61 7 3369 2088 Fax + 61 7 3369 3088
[email protected] www.wilkhahn.com.au Wilkhahn Forum Melbourne Level 1, 423 Bourke Street Melbourne VIC 3000 Tel. + 61 3 9670 5570 Fax + 61 3 9670 5535
[email protected] www.wilkhahn.com.au
China Wilkhahn Asia Pacific Suite 7602, Building 7 No. 10 Jian Guo Zhong Road Lu Wan District Shanghai 200025 Tel. + 86 21 5466 1919 Fax + 86 21 5465 1642
[email protected] www.wilkhahn.com.au España Wilkhahn S. A. Apolonio Morales, 6 28036 Madrid Tel. + 34 91 515 85 80 Fax + 34 91 411 46 86
[email protected] www.wilkhahn.es France Wilkhahn S.à r.l. 58 rue de Paradis 75010 Paris Tél. + 33 1 44 23 76 70 Fax + 33 1 44 23 82 84
[email protected] Great Britain Wilkhahn Ltd. Wilkhahn Forum London Morelands 5-23E Old Street London EC1V 9HL Tel. + 44 (0) 207 324 2900 Fax + 44 (0) 207 324 2901
[email protected]
Hong Kong Wilkhahn Asia Pacific Wilkhahn Forum Hong Kong Rooms 4505-7, 45 / F China Online Centre No. 333 Lockhart Road Wanchai Hong Kong Tel. + 852 2827 0800 Fax + 852 2827 0855
[email protected] www.wilkhahn.com.hk Japan Wilkhahn Japan Co., Ltd. Wilkhahn Forum Tokyo Tokyotatemono Aoyama Building B1 3-3-5 Kitaaoyama, Minato-ku 107-0061 Tokyo Tel. + 81 (0) 3 5414 8088 Fax + 81 (0) 3 5414 8089
[email protected] www.wilkhahn.co.jp Nederland Wilkhahn Forum Rotterdam Van Nelle-Ontwerpfabriek Van Nelleweg 3138 3044 BC Rotterdam Tel. + 31 10 750 33 90 Fax + 31 10 750 33 91
[email protected]
Schweiz Wilkhahn AG Postgasse 17 Postfach 808 3000 Bern 8 Tel. + 41 31 310 13 13 Fax + 41 31 310 13 19
[email protected] www.wilkhahn.ch Singapore Wilkhahn Asia Pacific Wilkhahn Forum Singapore 61 Alexandra Terrace #07-03 Harbour Link Singapore 119936 Tel. + 65 622 111 86 Fax + 65 622 111 25
[email protected] www.wilkhahn.com.sg South Africa Classic Working Life 43 Houghton Drive, Houghton Estate 2198 Johannesburg Tel. +27 (0) 11 728 9542
[email protected] www.classicwl.co.za
United Arab Emirates Wilkhahn Middle East DAFZA Phase 4E P.O. Box 54768 Österreich Block A, Office 132 Wilkhahn Handelsges.m.b.H. Dubai Wimbergergasse 12 Tel. + 971 42 04 51 32 Kundeneingang Kaiserstraße 69 Fax + 971 42 04 51 34 1070 Wien
[email protected] Tel. + 43 1 894 21 68-0 Fax + 43 1 890 32 39-15
[email protected]
WiA/WE/OE engl.
Wilkhahn Forum Chicago Wilkhahn Inc. Tree Studios 4 East Ohio Street, Studio 6 Chicago, IL 60611 Tel. +1 312 896 3446 Fax +1 312 762 9362
[email protected] www.wilkhahn.com
Belgium Wilkhahn Oude Leeuwenrui 7-11 2000 Antwerpen Tel. + 32 3 232 93 91 Fax + 32 3 227 16 16
[email protected]
50674002-SR 12.2014
North America Wilkhahn Forum New York Wilkhahn Inc. 601 West 26th Street Suite 820 New York, NY 10001 Tel. + 1 212 229 9455 Fax + 1 212 229 4772
[email protected] www.wilkhahn.com
