Transcript
PRICE LIST / ORDER TERMS 159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
Prices Effective 10/9/09
RF MODULES
Linx RF modules make it easy and cost-effective to add wireless capabilities to any product. That’s because Linx modules contain all the components necessary for the transmission of RF. Since no external components (except an antenna) are needed, the modules are easily applied, even by persons lacking previous RF design experience. This conserves valuable engineering resources and greatly reduces the product’s time to market. Once in production, Linx RF modules improve yields, reduce placement costs, and eliminate the need for testing or adjustment.
LC Series -
Low-Cost Ultra-Compact RF Data Module
The LC Series is ideally suited for volume use in OEM applications such as remote control, security, identification, and periodic data transfer. Housed in a compact surface-mount package, the LC Series modules utilize a highly-optimized SAW architecture to achieve an unmatched blend of performance, size, efficiency, and cost. When the transmitter is paired with a matching KH2 Series or LR Series receiver, a highly reliable wireless link is formed, capable of transferring serial data at rates of up to 5,000bps over distances of up to 3,000 feet. As with all Linx modules, the LC Series requires no tuning or external RF components (except an antenna). Quantity
TX
<200
$5.60
200-999
$4.90
1,000-4,999
$4.38
5,000+
Part #
• Ultra-compact size • Low cost in volume • High-performance SAW architecture • Direct serial interface • Low power consumption • 5kbps maximum data rate • Wide voltage range • No production tuning necessary • No external RF components required (except antenna) • Wide temperature range
Call
Description
TXM-***-LC LC Series Transmitter *** = 315, 418 (standard), 433MHz
LR Series -
Long-Range, Low-Cost RF Data Module
The LR Series is ideal for the wireless transfer of serial data, control, or command information in the favorable 260-470MHz band. The receiver’s advanced synthesized superhet architecture achieves an outstanding typical sensitivity of -112dBm, which provides a 5-10 times improvement in range over previous solutions. The transmitter’s synthesized architecture minimizes the effects of antenna loading, providing a more stable, consistent performance. When paired, a reliable wireless link is formed, capable of transferring data at rates of up to 10,000bps over distances of up to 3,000 feet. Applications operating at short distances or lower data rates will also benefit from increased link reliability and superior noise immunity. Housed in tiny reflow-compatible SMD packages, the LR Series modules are footprint compatible with the popular LC Series (the transmitter pin-out is slightly different), allowing existing users an instant path to improved range and lower cost. No external components are required (except an antenna), allowing for easy integration, even by engineers without previous RF experience. • • • • • •
Long-range Low cost PLL synthesized architecture Direct serial interface Data rates to 10,000bps No external RF components required (except antenna)
Quantity
TX
• • • • • •
RX
<200
$5.95
$9.80
200-999
$5.38
$9.63
1,000-4,999
$4.80
$8.65
5,000+
Call
Call
Part #
Description
TXM-***-LR LR Series Transmitter RXM-***-LR LR Series Receiver *** = 315, 418 (standard), 433MHz
Low power consumption Wide temperature range (-40 to +70°C) Compact surface-mount package Adjustable transmitter output power RSSI and power-down functions No production tuning necessary
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
RF MODULES LT Series -
Long-Range, Low-Cost RF Transceiver Module
The LT Series transceiver is ideal for the wireless bi-directional transfer of serial data, control, and command information in the favorable 260 to 470MHz band. The low-cost modules allow for the transparent transfer of serial data at rates of up to 10kbps over distances of up to 3,000 feet. Data can originate from virtually any serial data source, including microcontrollers, RS-232, or a Linx transcoder IC. Applications operating over shorter distances or at lower data rates will also benefit from increased link reliability and superior noise immunity. The modules operate over a 2.1 to 3.6VDC range and feature very low power consumption (7.6mA TX, 6.1mA RX, 11.5µA sleep), a wide operational temperature range (-40° to +85°C), adjustable transmitter power with up to +10dBm output, and a typical receiver sensitivity in excess of -112dBm. These RoHS-compliant modules are housed in a tiny SMD package that is well-suited to both prototyping and high-volume production. As with all Linx RF modules, no external RF components are required (except an antenna), which allows for rapid integration, even by engineers without previous RF design experience. • • • • • •
Long-range Low cost PLL synthesized architecture Direct serial interface Data rates to 10,000bps No external RF components required (except antenna)
Quantity
Price
<200
$12.89
200-999
$11.75
1,000-4,999
$10.90
5,000+
Part #
• • • • • •
Low power consumption Wide temperature range (-40 to +85°C) Compact surface-mount package Adjustable transmitter output power RSSI and power-down functions No production tuning necessary
Call
Description
TRM-***-LT LT Series Transceiver *** = 315, 418 (standard), 433MHz
KH2 Series -
Integrated Transmitter / Encoder and Receiver / Decoder Modules
The KH2 Series is well-suited for OEM applications, such as remote control / command, security, and automation. The KH2 transmitter combines a highly optimized SAW-based RF transmitter with an on-board encoder. The KH2 receiver combines a sensitive superhet receiver with an on-board decoder. The transmitter module accepts up to eight parallel inputs, allowing direct connection of switches, contacts, or microprocessor control lines. The receiver module provides eight logic-level outputs for connection of devices under control, such as relays, motors, indicators, or microprocessor lines. Ten tri-state address lines are also provided to allow for security and the creation of 310 (59,049) unique transmitter / receiver relationships. Together, the modules form a reliable wireless connection capable of operation over distances of up to 3,000 feet. The modules are also individually compatible with a complete family of FCC pre-certified OEM products, which include keyfob and handheld transmitters, relay and AC control modules. Housed in compact reflow-compatible SMD packages, the modules require no tuning or external RF components (except an antenna). • • • • • •
Complete RF / control solution On-board encoding / decoding Transfers status of 8 data lines 310 (59,049) selectable addresses Compact size Low power consumption
• • • • • •
Quantity
TX / ENC
RX / DEC
<200
$7.80
$11.95
200-999
$6.70
$10.80
1,000-4,999
$6.30
$9.75
5,000+
Call
Call
Part #
Description
TXE-***-KH2 KH2 Series Transmitter RXD-***-KH2 KH2 Series Receiver *** = 315, 418 (standard), 433MHz
Page 2
Up to 3,000ft range No production tuning necessary Cost-effective User-friendly SMD construction Directly connect switches, contacts, micros, etc. No external RF components required (except antenna)
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
RF MODULES ES Series -
High-Performance Single-Channel FSK RF Module
Housed in a tiny SMD package, the ES Series utilizes an advanced FM / FSK-based synthesized architecture to provide superior performance and noise immunity when compared to AM / OOK solutions. An outstanding 56kbps maximum data rate and widerange analog capability make the ES Series equally at home with digital data or analog sources such as audio. A host of useful features including RSSI, PDN, audio reference, LVL ADJ, low-voltage detect, and a microprocessor clock source are provided. Like all Linx modules, the ES Series requires no tuning or external RF components (except an antenna). • • • • • • •
Ultra-compact SMD package FM / FSK modulation for performance / noise immunity Precision-frequency synthesized architecture Excellent sensitivity for outstanding range performance Direct interface to analog and digital sources High data rate - 56,000bps max. Wide-range analog capability including audio 20Hz-28kHz
Quantity
TX
RX
<200
$11.95
$13.95
200-999
$10.30
$12.80
1,000-4,999
$9.57
$11.30
5,000+
Call
Call
Part #
• • • • • • •
Very low current for long life in battery-powered applications No production tuning necessary No external RF components required (except antenna) User powerdown input RSSI signal strength output Low-voltage detect and microprocessor clock output on TX Cost-effective
Description
TXM-***-ES ES Series Transmitter RXM-***-ES ES Series Receiver *** = 869, 916MHz
HP3 Series -
High-Performance Synthesized Multi-Channel Analog / Digital RF Module
The HP3 Series is designed for the cost-effective, high-performance wireless transfer of analog or digital data in the popular 902928MHz band. All HP3 Series parts feature eight parallel selectable channels, and models are available which add serial selection of 100 channels. To ensure robust performance, HP3 Series modules employ FM / FSK modulation and an advanced microprocessorcontrolled synthesized architecture. The receiver uses a highly sensitive dual conversion superhet architecture and, when paired with an HP3 Series transmitter, forms a reliable link for transferring analog and digital information over distances of up to 1,000 feet. Transmitter and receiver modules are available in reduced-size SIP or compact SMD packages. The SIP pin arrangement is identical to previous HP versions, eliminating the need for existing users to make PCB changes. Like all Linx modules, the HP3 Series requires no tuning or external RF components (except an antenna), making integration straightforward. • • • • • •
Complete 900MHz RF TX / RX solution Wide-range analog interface (50Hz - 28kHz) Direct serial data interface Very high data rate (up to 56kbps) Wide supply voltage range (2.8 - 13VDC) No external components required (except antenna)
• • • • • •
Microprocessor-based synthesized architecture Qualified data output, true RSSI, CTS functions Up to 1,000ft range Up to 100 RF channels No production tuning required Horizontal or vertical mount
Part #
<200
200-999
1,000-4,999
5,000+
TXM-900-HP3-PPO
$23.60
$21.30
$18.90
Call
TXM-900-HP3-PPS
$24.10
$21.80
$19.40
Call
TXM-900-HP3-SPO
$23.60
$21.30
$18.90
Call
TXM-900-HP3-SPS
$23.75
$21.46
$19.06
Call
RXM-900-HP3-PPO
$28.95
$27.60
$26.70
Call
RXM-900-HP3-PPS
$29.95
$28.55
$27.65
Call
RXM-900-HP3-SPO
$26.16
$24.94
$24.13
Call
RXM-900-HP3-SPS
$26.95
$25.75
$24.90
Call
Page 3
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
RF MODULES SG Series -
High-Performance, cost-effective GPS Receiver Module
The SG Series GPS receiver module is a self-contained high-performance GPS receiver with an on-board LNA and SAW filter. Based on the SiRFstar III chipset, it provides exceptional sensitivity, even in dense foliage and urban canyons. The module’s very low power consumption helps maximize runtimes in battery powered applications. With over 200,000 effective correlators, the SG Series receiver can acquire and track up to 20 satellites simultaneously in just seconds, even at the lowest signal levels. Housed in a compact reflow-compatible SMD package, the receiver requires no programming or additional RF components (except an antenna) to form a complete GPS solution. These features, along with the module’s standard NMEA data output, make the SG Series easy to integrate, even by engineers without previous RF or GPS experience. • • • •
Low-Cost Ultra-Compact Low power consumption (46mW) High sensitivity (-159dBm)
• • • •
Quantity
B
T
<200
$24.95
N/A
200-999
$23.20
N/A
1,000-4,999
$21.74
$21.74
5,000+
Call
Call
Part #
Easy serial interface Reflow compatible SMD package On-board LNA & SAW Filter RoHS compliant
Description
RXM-GPS-SG-x SG Series Receiver x = T (Tape / Reel, 1,000pcs./reel), B (Bulk)
SR Series -
High-Performance, cost-effective GPS Receiver Module
The SR Series GPS receiver module is a self-contained high-performance GPS receiver with an on-board antenna, LNA and SAW filter. Based on the SiRFstar III chipset, it provides exceptional sensitivity, even in dense foliage and urban canyons. The module’s very low power consumption helps maximize runtimes in battery powered applications. With over 200,000 effective correlators, the SR Series receiver can acquire and track up to 20 satellites simultaneously in just seconds, even at the lowest signal levels. Housed in a compact reflow-compatible SMD package, the receiver requires no programming or additional RF components to form a complete GPS solution. These features, along with the module’s standard NMEA data output, make the SR Series easy to integrate, even by engineers without previous RF or GPS experience. • • • • •
Low-Cost Ultra-Compact Low power consumption (46mW) Integral ceramic patch antenna On-board LNA & SAW Filter
Quantity
B
• • • •
T
<200
$34.95
N/A
200-999
$32.49
$32.49
1,000-4,999
$30.46
$30.46
5,000+
Call
Call
Part #
Description
RXM-GPS-SR-x SR Series Receiver x = T (Tape / Reel, 250pcs./reel), B (Bulk)
Page 4
High sensitivity (-159dBm) Easy serial interface Reflow compatible SMD package RoHS compliant
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
BROADBAND AMPLIFIERS The BBA Series is a family of low-cost, high-performance broadband RF amplifiers. The modules are ideally suited to a wide range of amplification and buffering applications, including extending the range of Linx’s own RF modules (where legally appropriate). Housed in a compact SMD package, the hybrid amps are matched to 50-ohm source and load impedances. The modules utilize a GaHBT gain stage, which yields high gain and IP3, excellent flatness, and low noise.
BBA-519-A -
High-Power RF Amplifier
The BBA-519-A is the high-power model and is suitable for the final gain stage in a transmitter. This amplifier can boost the output power of a transmitter to much higher levels and provides a significant increase in range (where legally appropriate). While its small signal gain is less than the BBA-322-A, its compression point is in excess of +18dBm, allowing amplification in excess of 50mW. This makes the BBA-519-A well suited to transmitter output amplification, driver and final PA stages, and general purpose amplification at higher power levels than the BBA- 322-A. Applications:
Features:
• • • •
• • • • • • • • • •
TX / RX range enhancement* IF or RF buffering Driver or final stage for PA General-purpose gain blocks
Quantity
Price
<200
$13.95
200-999
$11.25
1,000-4,999
$10.13
5,000+
High-output model 10MHz-4GHz broadband operation +18dB small signal gain at 900MHz Up to +17dBm (50mW) linear output power 4.8dB noise figure Operates from a single supply Prematched for 50Ω impedance I/O No external RF components required Exceptional gain flatness Compact surface-mount package
Call
Part #
Description
BBA-519-A
High Power Amplifier
*IMPORTANT NOTE The purchaser of this device should be aware that approvals may be required by applicable governing bodies for systems producing RF energy. It is the responsibility of the user to determine and adhere to the appropriate regulations for the region in which operation is intended.
Page 5
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
INTERFACE MODULES The Linx interface modules are designed to reliably convert data from one form to another while quickly and easily integrating into our customer’s designs. The first member of the interface family is the QS Series USB module. The QS module makes adding a USB interface exceptionally easy by making the USB operations invisible to the user. This saves development time and costs, allowing our customers to bring their products to market quickly and efficiently. INSTANT
QS Series -
Low Cost, Compact USB Interface Module
USB
UNIVERSAL SERIAL BUS
The Linx QS Series USB module allows the rapid and cost-effective addition of USB to virtually any device. Housed in a compact SMD package, the QS module provides a complete solution for bi-directional data transfer between USB and serial CMOS / TTL logic-level sources. The module can be directly connected to virtually any serial device, including microprocessors, RS-232 / RS485 level converters, or Linx RF modules. The QS Series USB module requires no external components (except a USB jack) and includes all necessary firmware and drivers, freeing the designer from complicated programming. Power can be supplied externally or from the USB bus. Both USB 1.1 and USB 2.0 are supported at data rates to 3Mbps.
Quantity
Price
<200
$9.45
200-999
$9.10
1,000-4,999
$8.90
5,000+
Call
Part #
Description
SDM-USB-QS-S
QS Series USB Module
INSTANT
QS Series Master Development System
USB
UNIVERSAL SERIAL BUS
This development system is designed to assist in the rapid evaluation and integration of the QS Series USB module. It contains a fully assembled board and comprehensive software that demonstrates the interface of a microcontroller or RS-232 device with a PC via the module. Much of the source code is included to help speed development of custom software. A prototyping area with a signal breakout header and complete documentation speeds the addition of USB to virtually any device. • • • • • • • •
USB <---> microcontroller interface USB <---> RS-232 interface USB <---> serial data interface Integrated RS-232 level converter On-board demo microcontroller User prototyping area Pre-assembled for immediate use Demonstration software included
Master Kit Contains: 2 1 • • • •
USB modules* Fully assembled evaluation board Full documentation Free technical support Support software CD Sample source code
* Listed quantity includes module mounted on development board.
Part # MDEV-USB-QS
Page 6
Description
Price
QS Master Development Kit
$129
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
EVALUATION KITS Evaluation / development kits put you on the fast track to wireless success. Each kit contains everything necessary to evaluate the Linx module family of your choice and then integrate it into your product in record time. Clear documentation will guide you through the legal and technical issues of application while fully assembled evaluation boards allow immediate module evaluation under actual field conditions. In addition, you’ll receive unlimited no-charge support from Linx’s knowledgeable application engineers. Linx requires the purchase of an evaluation kit prior to selling individual modules to a user. This is to ensure that every customer has all the tools necessary to correctly and legally bring wireless function to their product. Evaluation kits serve as a common point of reference among all of our customers and allow us to assist more effectively in explaining layout concepts or troubleshooting application difficulties.
LC Series Basic Evaluation Kit This kit is a quick way to evaluate the field performance of the popular LC Series. This kit is a cost-effective starting point and a valuable benchmark to compare the performance of your own design. The kit features pre-built evaluation boards with audible and visual indication for range and interference testing in anticipated use environments. Basic Kit Contains: • • • • • • • • • •
2 LC Series transmitter modules* 2 LR Series receiver modules* 2 CW Series antennas (HD Series with 315MHz kits) 2 Fully assembled evaluation boards 1 CR2032 lithium battery 2 AAA batteries 4 CONREVSMA001 RP-SMA connectors* 1 Ea. transmitter and receiver manuals FCC Part 2 and Part 15 guidelines Free technical support
* Listed quantity includes those populated on evaluation boards
Part # EVAL-***-LC
Description
Price
LC Series Basic Evaluation Kit
$139
*** = 315, 418 (standard), 433MHz
LR Series Basic Evaluation Kit The LR Series Basic Evaluation Kit allows the field performance of the LR Series modules to be evaluated. This kit is a cost-effective starting point and a valuable benchmark to compare the performance of your own design. The kit features prebuilt evaluation boards with audible and visual indication for range and interference testing in anticipated use environments. Basic Kit Contains: • • • • • • • • • •
2 LR Series transmitter modules* 2 LR Series receiver modules* 2 CW Series antennas (HD Series with 315MHz kits) 2 Fully assembled evaluation boards 1 CR2032 lithium battery 2 AAA batteries 4 CONREVSMA001 RP-SMA connectors* 1 Ea. transmitter and receiver manuals FCC Part 2 and Part 15 guidelines Free technical support
* Listed quantity includes those populated on evaluation boards
Part # EVAL-***-LR
Description
Price
LR Series Basic Evaluation Kit
$139
*** = 315, 418 (standard), 433MHz
Page 7
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
EVALUATION KITS NEW
LT Series Basic Evaluation Kit
The LT Series Basic Evaluation Kit allows the field performance of the LT Series modules to be evaluated. This kit is a costeffective starting point and a valuable benchmark to compare the performance of your own design. The kit features pre-built evaluation boards with audible and visual indication for range and interference testing in anticipated use environments. The onboard transcoders provide bi-directional remote control with confirmation, and a prototyping area allows circuitry to be developed on the board. Basic Kit Contains: • • • • • • • •
4 LT Series transceiver modules* 2 CW Series antennas (HD Series with 315MHz kits) 2 Fully assembled evaluation boards 4 AAA batteries 4 CONREVSMA001 RP-SMA connectors* 1 Transceiver manual FCC Part 2 and Part 15 guidelines Free technical support
* Listed quantity includes those populated on evaluation boards
Part # EVAL-***-LT
Description
Price
LT Series Basic Evaluation Kit
$149
*** = 315, 418 (standard), 433MHz
KH2 Series Basic Evaluation Kit This kit allows rapid evaluation of the KH2 Series and serves as a valuable reference during the design process. The kit features pre-built evaluation boards for range testing and benchmarking. Additional modules and guidelines for integrating KH2 Series modules into your own design are also included.
Basic Kit Contains: • • • • • • • • • •
2 KH Series transmitter / encoder modules* 2 KH Series receiver / decoder modules* 2 CW Series antennas (HD Series with 315MHz kits) 2 Fully assembled evaluation boards 1 CR2032 lithium battery 2 AAA batteries 4 CONREVSMA001 RP-SMA connectors* 1 Ea. transmitter and receiver manuals FCC Part 2 and Part 15 guidelines Free technical support
* Listed quantity includes those populated on evaluation boards
Part # EVAL-***-KH2
Description
Price
KH2 Series Basic Evaluation Kit
$149
*** = 315, 418 (standard), 433MHz
Page 8
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
EVALUATION KITS ES Series Basic Evaluation Kit This kit is a quick way to evaluate the field performance of the popular ES Series modules. The kit does not allow for the level of development that our Master Development System does, but it is a cost-effective starting point for many basic applications. The development boards feature audible and visual indication for range testing and a small prototyping area with signal breakout header for the user’s circuit. Basic Kit Contains: • • • • • • • • • •
2 ES Series transmitter modules* 2 ES Series receiver modules* 2 CW Series antennas 2 Fully assembled evaluation boards 1 9V battery 2 AAA batteries 4 CONREVSMA001 RP-SMA connectors* 1 Ea. transmitter and receiver manuals FCC Part 2 and Part 15 guidelines Free technical support
* Listed quantity includes those populated on evaluation boards
Part # EVAL-***-ES *** = 869, 916MHz
Page 9
Description
Price
ES Series Basic Evaluation Kit
$179
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
DEVELOPMENT SYSTEMS
“YOUR F TO WIRE AST TRACK LESS SU CCESS”
HP3 Master Development System
This Master Development System provides a versatile platform to evaluate the Linx HP3 module family and then begin integration of it into your own design. The system includes a pair of populated development boards which feature on-board encoder / decoder ICs with buzzer and relay outputs to allow range and interference testing in anticipated use environments. For applications requiring software development, the system also includes two (2) of either an RS-232 or USB interface module and demonstration software. When you are ready to begin development, a convenient prototyping area with breakout headers and regulated power supply allows for rapid testing and interface. Finally, when you have integrated the modules into your product, the system will continue to serve as a valuable benchmark to compare the performance of your own layout and design. Master System Contains:
Master System Features:
• • • • • • • • • •
• • • • • • • •
2 Transmitter modules* 2 Receiver modules* 2 CW Series antennas 2 9V batteries 2 Fully assembled development boards 4 CONREVSMA001 RP-SMA connectors* 1 Ea. transmitter and receiver manuals FCC Part 2 and Part 15 guidelines Free technical support Support software CD
On-board encoder / decoder ICs Integrated RS-232 or USB Relay output for external loads 85dB buzzer for range testing Efficient 1/4-wave antennas User prototyping area 5V on-board regulator Pre-assembled for immediate use
* Listed quantity includes those populated on development boards
Part #
Description
MDEV-900-HP3-PPS-RS232 MDEV-900-HP3-SPS-RS232 MDEV-900-HP3-PPS-USB MDEV-900-HP3-SPS-USB
Master Master Master Master
System System System System
for for for for
HP3 HP3 HP3 HP3
Price
Pinned RS232 SMD RS232 Pinned USB SMD USB
$299 $299 $324 $324
ES Series Master Development System This Master Development System provides the most complete opportunity to evaluate the Linx ES Series modules and then begin the integration of them into your own design. It features an on-board encoder / decoder with buzzer and relay outputs, which allow range and interference testing in anticipated use environments. When you are ready to begin development, a convenient prototyping area with breakout headers and regulated power supply allows for rapid testing and interface. For applications requiring software development, an on-board RS-232 serial interface and demonstration software are provided. Finally, when you have integrated the modules into your own product, the system will continue to serve as a valuable benchmark to compare the performance of your own layout and design. Master System Contains:
Master System Features:
• • • • • • • • • •
• • • • • • • •
2 Transmitter modules* 2 Receiver modules* 2 CW Series antennas 2 9V batteries 2 Fully assembled development boards 4 CONREVSMA001 RP-SMA connectors* 1 Ea. transmitter and receiver manuals FCC Part 2 and Part 15 guidelines Free technical support Support software CD
On-board encoder / decoder ICs Integrated RS-232 or USB interface Relay output for external loads 85dB buzzer for range testing Efficient 1/4-wave antennas User prototyping area 5V on-board regulator Pre-assembled for immediate use
* Listed quantity includes those populated on development boards
Part # MDEV-***-ES-USB MDEV-***-ES-RS232 *** = 869, 916MHz
Page 10
Description Master System for ES USB Interface Master System for ES RS232 Interface
Price $324 $299
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
DEVELOPMENT SYSTEMS SG Series Master Development System The fast track to GPS success. The Linx MDEV-GPS-SG contains everything needed to rapidly evaluate the SG Series GPS modules and implement them in record time. This all-inclusive Master Development System features a pre-assembled development board with an on-board OLED display for standalone testing. The system can also be attached to a PC via USB and operated using the supplied software. The software shows satellite positions, SNR, satellites in use, NMEA data, coordinates, and even the module’s position on GoogleTM Maps! For development, a convenient prototyping area with breakout headers and regulated power supply allows for rapid testing and interface. Direct technical support for the system and all on-board Linx products is also included. Master System Contains:
Master System Features:
• • • • • • • •
• • • • •
2 Receiver modules* 1 SH Series antenna 4 AAA batteries 1 Fully assembled development board 1 CONREVSMA001 RP-SMA connector* 1 receiver manual Free technical support Support software CD
Integrated USB interface OLED Display User prototyping area 5V on-board regulator Pre-assembled for immediate use
* Listed quantity includes those populated on development boards
Part # MDEV-GPS-SG
Description Master System for SG Series
Price $249
SR Series Master Development System The fast track to GPS success. The Linx MDEV-GPS-SR contains everything needed to rapidly evaluate the SR Series GPS modules and implement them in record time. This all-inclusive Master Development System features a pre-assembled development board with an on-board OLED display for standalone testing. The system can also be attached to a PC via USB and operated using the supplied software. The software shows satellite positions, SNR, satellites in use, NMEA data, coordinates, and even the module’s position on GoogleTM Maps! For development, a convenient prototyping area with breakout headers and regulated power supply allows for rapid testing and interface. Direct technical support for the system and all on-board Linx products is also included. Master System Contains:
Master System Features:
• • • • • • • •
• • • • •
2 Receiver modules* 1 SH Series antenna 4 AAA batteries 1 Fully assembled development board 1 CONREVSMA001 RP-SMA connector* 1 receiver manual Free technical support Support software CD
Integrated USB interface OLED Display User prototyping area 5V on-board regulator Pre-assembled for immediate use
* Listed quantity includes those populated on development boards
Part # MDEV-GPS-SR
Page 11
Description Master System for SR Series
Price $289
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
DEVELOPMENT SYSTEMS MS Series Master Development System This comprehensive development system is designed to assist in the rapid evaluation and integration of the MS Series encoders and decoders. The all-inclusive development system contains all of the tools necessary to fully explore the capabilities of the MS Series encoders and decoders. It features pre-assembled evaluation boards, which include everything needed to quickly test the operation of the encoder and decoder. On-board Linx RF modules provide a wireless link for basic remote control operation, which allows the encoder and decoder to be quickly tested in a wireless environment. When you are ready to begin development, a large prototyping area with breakout headers and regulated power supply allows for rapid testing and integration of your own design. In addition to its stand-alone functions, the board can also be connected to a PC via USB. Included software audibly and visually demonstrates the powerful capabilities of the MS Series. Master System Contains:
Master System Features:
• • • • • • • • • •
• • •
2 MS Series encoders* 2 MS Series decoders* 1 418MHz LR or 916MHz ES Series transmitter* 1 418MHz LR or 916MHz ES Series receiver* 2 CW Series antennas 2 Fully assembled development boards 2 9V batteries Full documentation Free technical support Support software CD
• • • •
User prototyping area Breakout header On-board 3V regulator (5V for ES Series receiver) USB interface Pre-assembled for immediate use Demonstration software included Satifies the kit requirements for the MS, LR, or ES Series
* Listed quantity includes those populated on development boards
Part # MDEV-LICAL-MS MDEV-LICAL-MS-ES
Description
Price
MS Master Development Kit w/ LR Modules MS Master Development Kit w/ ES Modules
$249 $249
HS Series Master Development System This all-inclusive development system contains all of the tools necessary to fully explore the capabilities of the HS Series encoders and decoders, and assist in the rapid evaluation and integration of the parts into an end product. It features pre-assembled evaluation boards, which include everything needed to quickly test the operation of the encoder and decoder. On-board Linx RF modules provide a wireless link for basic remote control operation, which allows the encoder and decoder to be quickly tested in a wireless environment. When you are ready to begin development, a large prototyping area with breakout headers and regulated power supply allows for rapid testing and integration of your own design. In addition to its stand-alone functions, the board can also be connected to a PC via USB. Included software audibly and visually demonstrates the powerful capabilities of the HS Series.
Master System Contains:
Master System Features:
• • • • • • • • • •
• • •
2 HS Series encoders* 2 HS Series decoders* 1 418MHz LR or 916MHz ES Series transmitter* 1 418MHz LR or 916MHz ES Series receiver* 2 CW Series antennas 2 Fully assembled evaluation boards 2 9V batteries Full documentation Free technical support Support software CD
• • • •
User prototyping area Breakout header On-board 3V voltage regulator (5V for ES Series receiver) USB interface Pre-assembled for immediate use Demonstration software included Satisfies the kit requirements for the HS, LR, or ES Series
* Listed quantity includes those populated on development boards
Part # MDEV-LICAL-HS MDEV-LICAL-HS-ES
Page 12
Description
Price
HS Master Development Kit w/ LR Modules HS Master Development Kit w/ ES Modules
$299 $299
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
DEVELOPMENT SYSTEMS MT Series Master Development System This all-inclusive development system contains all of the tools necessary to fully explore the capabilities of the MT Series transcoders, and assist in the rapid evaluation and integration of the parts into an end product. It features pre-assembled evaluation boards, which include everything needed to quickly test the operation of the transcoder. On-board Linx RF modules provide a wireless link for basic remote control operation, which allows the transcoder to be quickly tested in a wireless environment. When you are ready to begin development, a large prototyping area with breakout headers and regulated power supply allows for rapid testing and integration of your own design. In addition to its stand-alone functions, the board can also be connected to a PC via USB. Included software demonstrates the powerful capabilities of the MT Series. Master System Contains:
Master System Features:
• • • • • • • •
• • • • • •
4 MT Series transcoders* 2 418MHz LT Series transceivers* 2 CW Series antennas 2 Fully assembled evaluation boards 2 9V batteries Full documentation Free technical support Support software CD
User prototyping area Breakout header On-board 3V regulator USB interface Pre-assembled for immediate use Demonstration software included
* Listed quantity includes those populated on development boards
Part # MDEV-LICAL-MT
Page 13
Description
Price
MT Series Master Development Kit $299
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
INTEGRATED CIRCUITS LS Series The Linx LS Series encoders and decoders provide an extremely simple, yet reliable, protocol for the transmission of switch closures or button contacts. This series can find use in any basic, low-cost remote control application. Simply take a data line high on the encoder and a corresponding line will go high on the decoder. No programming or addressing is required, making integration of the LS extremely easy while maintaining a robust link. Quantity
ENC
DEC
Features:
<200
$2.89
$2.89
• • • •
200-999
$2.67
$2.67
1,000-4,999
$2.42
$2.42
5,000+
Call
Call
Part #
Description
LICAL-ENC-LS001 LICAL-DEC-LS001
LS Series Encoder LS Series Decoder
Ro
C
HS
No addressing or programming Easy to use Very low current consumption Four data lines
• • • •
Easy serial interface Selectable baud rates High noise immunity Standard PDIP package
Applications Include: • • • • •
Range Testing Simple Remote Control Wire Elimination Remote Status Monitoring Lighting Control
OMP IAN T L
MS Series MS Series encoders and decoders are ideal for remote control and command, security, keyless entry, and a host of similar applications. The encoder IC allows the status of up to eight buttons or contacts to be transferred with high level of uniqueness via an RF or infrared link. The decoder then reproduces the button states on its outputs. The MS Series has several unique features that make it superior to competitive solutions. These include the ability to easily define user groups and assign permissions to individual output lines. Outputs can be latched or momentary and secure address assignments can be instantly changed without cumbersome DIP switches or cut traces. The large, twenty-four bit address size provides for over 16,000,000 unique addresses, making transmissions highly unique and secure, and minimizing the possibility of multiple devices having conflicting addresses. The decoder can learn up to 40 different encoders and outputs the originating encoder ID for logging or identification. Housed in tiny 20-pin SSOP packages, MS Series parts feature low supply voltage and low current consumption. Quantity
ENC
DEC
Features:
<200
$3.10
$3.10
200-999
$2.95
$2.95
1,000-4,999
$2.73
$2.73
Call
Call
• • • • • • •
5,000+
Part #
Description
LICAL-ENC-MS001 LICAL-DEC-MS001
MS Series Encoder MS Series Decoder
Ro
C
HS
OMP IAN T L
Page 14
Secure 224 possible addresses 8 data lines Low 2.0-5.5V operating voltage Low supply current (370µA @ 3V) Ultra-low 0.1µA standby current Definable recognition authority True serial encoding
Applications Include: • • • • • • •
Keyless Entry Door and Gate Openers Security Systems Remote Device Control Car Alarms / Starters Remote Status Monitoring Call / Paging Systems
• • • • • • •
Excellent noise immunity Selectable baud rates No programmer required Direct serial interface Small SMD package Latched or momentary outputs Encoder ID output by decoder
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
INTEGRATED CIRCUITS ®
HS Series - Encoder and Decoder with CipherLinx
Encrypted Remote Control Technology
HS Series encoders and decoders are designed to provide maximum security for Remote Keyless Entry (RKE) and remote control applications. The series consists of an encoder that will encode the status of up to 8 buttons or contact closures into a highly secure encrypted transmission, and a decoder that will decode, authenticate, and replicate the button or contact states. The series uses CipherLinx® encrypted remote control technology, which is based on a core algorithm developed by the United States National Security Agency (NSA), which is considered one of the most secure encryption algorithms available. One of the key features of CipherLinx® technology is that it will never send or accept the same packet twice. This alone makes it more secure than the popular “rolling code” type devices, which could repeat packets multiple times. Furthermore, CipherLinx® changes codes on every packet, not just every button press. In addition to offering state-of-the-art security, the parts also offer innovative features, including up to 8 data lines, multiple baud rates, individual “button level” user permissions, an optional keypad PIN, encoder identity output, low power consumption and easy “programming free” setup. The compelling combination of security, features, and ease of use make the HS Series the logical choice for all high-security RKE applications. Features: Quantity ENC DEC ® <200
$3.45
$3.45
200-999
$3.22
$3.22
1,000-4,999
$2.99
$2.99
5,000+
Call
Call
Part #
Description
LICAL-ENC-HS001 LICAL-DEC-HS001
HS Series Encoder HS Series Decoder Ro
EVALUATED
C
HS
OMP IAN T L
• • • • • • • • • • • • • • • •
CipherLinx security technology Secure data authentication ISE evaluated Never loses sync Never sends or accepts the same packet twice Optional PIN-protected encoder access 8 selectable data lines Applications Include: Wide 2.0 to 5.5V operating voltage • Keyless Entry / Access Control Low supply current (500µA @ 3V) • Door and Gate Openers Ultra-low 0.2µA sleep current • Security Systems Selectable baud rates • Remote Device Control No programmer required • Car Alarms / Starters Encoder ID available at decoder • Remote Status Monitoring “Button level” permissions • Home / Industrial Automation True serial encoding Excellent noise immunity
MT Series The MT Series transcoder IC provides unprecedented features for bi-directional remote control and command applications. Encoder and decoder ICs are commonly used to allow the status of inputs, such as switch or button closures, to be sent in one direction across a wireless link. While the MT can perform these basic uni-directional functions with ease, it also allows the bi-directional exchange of information and reception confirmation. The transcoder provides eight lines which can be configured as inputs or outputs. The outputs can be individually set for latched or momentary operation. Recognition of the individual outputs can be easily defined for each device by the manufacturer or end user. This allows the creation of user groups, relationships, and permissions. A large twenty-four bit address size makes transmissions highly unique, minimizing the possibility of conflict between multiple devices. An automatic confirmation indicates that the transmission was successfully received. The MT also outputs the ID of the originating transcoder for logging or identification. A Serial Interface Engine (SIE) allows the transcoder to be configured and controlled from an external microcontroller or PC. Permissions and users can be configured, modes and functions set, and external data added to the transmission. A targeting feature allows commands to be directed to specific devices. The MT is housed in a tiny 20-pin SSOP package, and features low supply voltage, current consumption and selectable baud rates. It is also compatible with Linx MS Series encoder and decoder ICs. • Transmitter ID output Features: Quantity Price • Custom data transfer • Bi-directional control <200
$3.28
200-999
$2.97
1,000-4,999
$2.89
Part #
Description
• • • • • •
LICAL-TRC-MT
MT Series Transcoder
Applications Include:
5,000+
Call
• • • • • • •
Page 15
Automatic confirmation Secure 224 possible addresses 8 status lines Serial Interface Engine (SIE) Latched and/or momentary outputs Definable recognition authority Keyless Entry Door and Gate Openers Security Systems Remote Device Control Car Alarms / Starters Remote Status Monitoring Call / Paging Systems
• • • • • •
Device targeting Wide operating voltage Low supply current (370µA @ 3V) True serial encoding Selectable baud rates No programmer required
IED IF
www.linxtechnologies.com
TA
S
WIRELESS MADE SIMPLE ®
ECERT PR
IN
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251
NT RF
PRE-CERTIFIED OEM RF PRODUCTS Keyfob Transmitter The Keyfob transmitter is ideal for general-purpose remote control and command applications. It has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing development costs and time to market. Available in 315, 418 (standard), and 433.92MHz, this stylish and compact remote has a range of up to 750 feet when combined with the KH2 Series or LR Series receiver. The Keyfob can be configured with 1 to 5 buttons and the keypad and labeling can be modified to meet specific customer requirements. Selectable addressing provides security and allows the creation of up to 1,024 distinct transmitter-receiver relationships. The Keyfob is available in black, white, or translucent colors. The transmission can be decoded using a matching Linx Function Module, KH2 Series receiver / decoder, or an LR or LT Series receiver paired with a decoder IC or microcontroller. The unit operates from a single 3V CR2032 lithium button cell. Quantity
Price
Part #
<200
$14.95
# *** xxx
200-999
$13.78
1,000-4,999
$10.90
5,000+
Call
CMD -KEY#-***-xxx Number of buttons: 1 to 5 315, 418 (standard), 433MHz Leave blank for standard Black CGY= Gray • CBL = Blue • WHT = White CRE = Red • CPU = Purple
* 1,000 piece minimum order for color cases
MS Keyfob Transmitter The Linx MS Series Keyfob transmitter is ideal for remote control and command applications. Available in 315, 418 (standard), and 433.92MHz versions, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance. This dramatically reduces development cost and time to market. The high-performance synthesized design provides superior frequency accuracy and minimizes body proximity effects. When combined with an LR or LT Series receiver, the Keyfob can operate at distances of up to 750 feet. Ease of use and security are dramatically enhanced by the on-board MS Series encoder, which allows instant creation of up to 16,777,216 (224) unique addresses without cumbersome DIP switches or cut traces. When paired with a MS Series decoder, Keyfob identity can be determined and button permissions established. The Keyfob is available with 1 to 5 buttons and can be custom labeled. The unit operates from a single 3V CR2032 lithium button cell. Quantity Price Part # OTX-***-HH-KF#-MS-xxx <200
$17.95
200-999
$14.75
1,000-4,999
$11.30
5,000+
Call
# *** xxx
Number of buttons: 1 to 5 315, 418 (standard), 433MHz Leave blank for standard Black CGY= Gray • CBL = Blue • WHT = White CRE = Red • CPU = Purple
* 1,000 piece minimum order for color cases
Custom Keyfobs With a one-time NRE and minimum order, Linx can configure the keypad and label areas to meet your specific requirements. Case color, button colors and labels, and logos can all be customized for a specific company or product, adding a great deal of uniqueness and professionalism to the product. Contact Linx for details.
Page 16
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
OEM PRODUCT EVALUATION KITS Keyfob Basic Evaluation Kit The Basic Evaluation Kit is an ideal starting point to evaluate the performance of Linx’s popular keyfob transmitters and begin integration into your own product. The pre-certified keyfobs allow OEM customers to rapidly incorporate wireless functions in a wide variety of remote control and command applications. The kit contains two keyfob transmitters, along with a pre-assembled demonstration / development board based on the KH2 Series receiver module. An antenna, battery, extra KH2 receiver, and full documentation are also provided. The system may be ordered with keyfobs in 1 to 5-button configurations. (The 5-button configuration is supplied unless otherwise specified. Basic Kit Contains: • • • • • • • •
2 Keyfob transmitters 2 KH2 Series receiver modules* 1 CW Series antenna (HD Series with 315MHz kits) 1 Fully assembled evaluation board with batteries 2 CONREVSMA001 RP-SMA connectors* 1 Ea. Keyfob and KH2 receiver manuals FCC Part 2 and Part 15 guidelines Free technical support
* Listed quantity includes module mounted on development board
Part #
Description
Price
EVAL-***-KEY# Keyfob Basic Evaluation Kit *** = 315, 418 (standard), 433MHz # = Number of buttons: 1 to 5
$119
MS Keyfob Master Development System The MS Keyfob Master Development System is an ideal starting point to evaluate the performance of Linx's popular MS Keyfob transmitters and begin integration into your product. These FCC pre-certified Keyfobs allow OEMs to rapidly incorporate wireless functions in a variety of remote control and command applications. The all-inclusive development system features a pre-assembled evaluation board, which includes everything needed to quickly test the operation of the transmitter, receiver, and decoder. When you are ready to begin development, a convenient prototyping area with breakout headers and regulated power supply on the receiver / decoder board allows for rapid testing and interface. In addition to its stand-alone functions, the board can also be connected to a PC via a USB connection. Included software audibly and visually demonstrates the powerful capabilities of the system. Master System Contains:
Master System Features:
• • • • • • • • • •
• • • • • • •
2 MS Keyfob transmitters 2 MS Series decoders* 2 LR Series receivers* 1 CW Series antenna (HD Series with 315MHz) 1 Fully assembled evaluation board 1 9V battery 2 CONREVSMA001 RP-SMA connectors* Full documentation Free technical support Support software CD
User prototyping area Breakout header On-board 3V regulator USB Interface Pre-assembled boards for immediate use Demonstration software Satisfies the kit purchase requirement for the MS, LR, and QS Series modules
* Listed quantity includes module mounted on development board
Part # MDEV-***-HH-KF5-MS
Description
Price
MS Keyfob Master Development System
$149.95
*** = 315, 418 (standard), 433MHz
Page 17
IED IF
www.linxtechnologies.com
TA
S
WIRELESS MADE SIMPLE ®
ECERT PR
IN
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251
NT RF
PRE-CERTIFIED OEM RF PRODUCTS Full-Size Handheld Transmitter This handheld remote is capable of up to 100ft. transmission ranges when combined with the KH2, LR, or LT Series receiver. It has 8 buttons and selectable addressing allows the creation of up to 256 distinct transmitter / receiver relationships. The transmission can be decoded using a matching Linx Function Module, a KH2 Series receiver / decoder, or an LR or LT Series receiver paired with a decoder IC or a microcontroller. The unit operates from a single 3V lithium button cell and is FCC pre-approved. Quantity
Price
Part #
<200
$24.95
*** = 315, 418 (standard), 433MHz
200-999
$22.00
1,000-4,999
$19.50
5,000+
Call
CMD-HHTX-***
Now available with metal dome buttons for a more tactile feel!
Compact Handheld Transmitter
The Compact Handheld transmitter is ideal for general remote control and command applications. As a part of our Holtek encoderbased OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing development costs and time to market. Available in 315, 418 (standard), and 433.92MHz, this compact remote has a transmission range of up to 750 feet when combined with the KH2, LR, or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Selectable addressing provides security and allows the creation of up to 1,024 distinct transmitter-receiver relationships. The address can be easily changed via an externally accessible DIP switch. The transmission can be decoded using a matching Linx Function Module, KH2 Series receiver / decoder, or a Linx LR or LT Series receiver paired with a decoder IC or microcontroller. The unit uses a single 3V CR2032 lithium button cell. Part # CMD-HHCP-***-xxx-xx Quantity
Standard
Metal Dome $22.55
<200
$21.95
200-999
$19.75
$20.35
1,000-4,999
$18.24
$18.84
5,000+
Call
Call
*** xx xxx
315, 418 (standard), 433MHz MD - leave blank for standard buttons Leave blank for standard Black CGY= Gray • CBL = Blue • WHT = White CRE = Red • CPU = Purple
* 1,000 piece minimum order for color cases
Long-Range Handheld Transmitter
Now available with metal dome buttons for a more tactile feel!
The Long-Range Handheld transmitter is ideal for general-purpose remote control and command applications that require longer transmission distances. As a part of our Holtek encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), and 433.92MHz, this small remote has a transmission range of up to 1,000 feet when combined with the KH2, LR, or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Selectable addressing provides security and allows the creation of up to 1,024 distinct transmitter-receiver relationships. The address can be easily changed via an externally accessible DIP switch. The transmission can be decoded using a matching Linx Function Module, KH2 Series receiver / decoder, or a Linx LR or LT Series receiver paired with a decoder IC or microcontroller. The unit uses a single 3V CR2032 lithium button cell. Part # CMD-HHLR-***-xxx-xx *** 315, 418 (standard), 433MHz Quantity Standard Metal Dome <200
$24.95
$25.55
200-999
$22.30
$22.90
1,000-4,999
$19.70
$20.30
5,000+
Call
Call
xx xxx
MD - leave blank for standard buttons Leave blank for standard Black CGY= Gray • CBL = Blue • WHT = White CRE = Red • CPU = Purple
* 1,000 piece minimum order for color cases
Custom Transmitter Keypads With a one-time NRE and minimum order, Linx can configure the keypad and label areas to meet your specific requirements. Button placement, colors, and logos can all be customized for a specific company or product, adding a great deal of uniqueness and professionalism to the product. Contact Linx for details.
Page 18
IED IF
www.linxtechnologies.com
TA
S
WIRELESS MADE SIMPLE ®
ECERT PR
IN
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251
NT RF
PRE-CERTIFIED OEM RF PRODUCTS MS Compact Handheld Transmitter The Linx OTX-***-HH-CP8-MS Compact Handheld Transmitter is ideal for general-purpose remote control and command applications. This unit has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this compact remote has a transmission range of up to 750 feet when combined with the LR or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Ease of use and security are dramatically enhanced by the on-board MS Series encoder, which allows instant creation of up to 16,777,216 (224) unique addresses without cumbersome DIP switches or cut traces. When paired with a MS Series decoder, transmitter identity can be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell. Quantity Standard Part # OTX-***-HH-CP8-MS <200 $31.23 200-999
$28.09
1,000-4,999
$27.37
5,000+
Call
*** = 315, 418 (standard), 433MHz
MS Long-Range Handheld Transmitter The Linx OTX-***-HH-LR8-MS Long-Range Handheld Transmitter is ideal for general-purpose remote control and command applications that require longer transmission distances. This unit has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this small remote has a transmission range of up to 1,000 feet when combined with the LR or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Ease of use and security are dramatically enhanced by the on-board MS Series encoder, which allows instant creation of up to 16,777,216 (224) unique addresses without cumbersome DIP switches or cut traces. When paired with a MS Series decoder, transmitter identity can be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell. Quantity
Standard
<200
$32.80
Part #
200-999
$29.50
*** = 315, 418 (standard), 433MHz
1,000-4,999
$28.75
5,000+
Call
OTX-***-HH-LR8-MS
Custom Transmitter Keypads With a one-time NRE and minimum order, Linx can configure the keypad and label areas to meet your specific requirements. Button placement, colors, and logos can all be customized for a specific company or product, adding a great deal of uniqueness and professionalism to the product. Contact Linx for details.
Page 19
IED IF
www.linxtechnologies.com
TA
S
WIRELESS MADE SIMPLE ®
ECERT PR
IN
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251
NT RF
PRE-CERTIFIED OEM RF PRODUCTS HS Compact Handheld Transmitter The HS Compact Handheld RF transmitter is ideal for remote control and command applications that require the highest level of security. As a part of our HS encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this compact remote uses an internal antenna element and is capable of transmitting over distances of up to 750 feet when combined with the LR or LT Series RF receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Security is dramatically enhanced by the on-board HS Series encoder, which uses CipherLinx® technology, a high-security encryption algorithm and wireless protocol. When paired with an HS Series decoder, transmitter identity can be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell. Quantity Standard Part # OTX-***-HH-CP8-HS <200 $31.50 200-999
$28.30
1,000-4,999
$27.50
5,000+
Call
*** = 315, 418 (standard), 433MHz
HS Long-Range Handheld Transmitter The HS Long-Range Handheld RF transmitter is ideal for remote control and command applications that require the highest level of security. As a part of our HS encoder-based OEM family, it has been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this small remote has a compact external antenna and is capable of transmitting over distances of up to 1,000 feet when combined with the LR or LT Series receiver. The transmitter unit can be configured with 1 to 8 buttons and the keypad and labeling can be modified to meet specific OEM customer requirements. Security is dramatically enhanced by the on-board HS Series encoder, which uses CipherLinx® technology, a high-security encryption algorithm and wireless protocol. When paired with an HS Series decoder, transmitter identity can be determined and button permissions established. The unit uses a single 3V CR2032 lithium button cell. Quantity Standard Part # OTX-***-HH-LR8-HS <200 $32.95 200-999
$29.75
1,000-4,999
$28.90
5,000+
Call
*** = 315, 418 (standard), 433MHz
Custom Transmitter Keypads With a one-time NRE and minimum order, Linx can configure the keypad and label areas to meet your specific requirements. Button placement, colors, and logos can all be customized for a specific company or product, adding a great deal of uniqueness and professionalism to the product. Contact Linx for details.
Page 20
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
PRE-CERTIFIED OEM RF PRODUCTS Holtek-Based Handheld Basic Evaluation Kits This Basic Evaluation Kit allows for rapid testing of Linx’s popular handheld transmitters and speeds integration into your own product. The pre-certified HHLR, HHCP, and HHTX transmitters allow OEM customers to rapidly incorporate wireless functions in a wide variety of wireless products. The kit contains two handheld transmitters, along with a pre-assembled demonstration / development board based on the KH2 Series receiver module. An antenna, battery, extra KH2 receiver, and full documentation are also provided. Customization of the handheld transmitter’s button area is available on OEM orders. Basic Kit Contains: • • • • • • • •
2 HH Series transmitters 2 KH2 Series receiver modules* 1 CW Series antenna (HD Series with 315MHz kits) 1 Fully assembled evaluation board with batteries 2 CONREVSMA001 RP-SMA connectors* 1 Ea. keyfob and KH2 receiver manuals FCC Part 2 and Part 15 guidelines Free technical support
CP (Compact) LR (Long-Range)
TX (Full-Size)
* Listed quantity includes those populated on evaluation boards
Part #
Description
EVAL-***-HHTX Handheld Evaluation Kit - Full-Size Handheld Transmitter EVAL-***-HHCP Handheld Evaluation Kit - Compact Handheld Transmitter EVAL-***-HHLR Handheld Evaluation Kit - Long-Range Handheld Transmitter *** = 315, 418 (standard), 433MHz
Price $129 $129 $129
MS Handheld Transmitter Master Development System The Linx MS Handheld transmitters are ideal for remote control and command applications. Available in 315, 418 (standard), or 433.92MHz versions, they have been pre-certified for FCC Part 15, Industry Canada, and European CE (433.92MHz) compliance. This dramatically reduces development cost and time to market. When combined with an LR Series receiver, the transmitters can operate at distances of up to 1,000 feet (LR) or 750 feet (CP). This comprehensive development system is designed to assist in the rapid evaluation and integration of the Handheld transmitters. The all-inclusive kit features a pre-assembled evaluation board, which includes everything needed to quickly test the operation of the transmitter, receiver, and decoder. When you are ready to begin development, a convenient prototyping area with breakout headers and regulated power supply on the receiver / decoder board allows for rapid testing and interface. In addition to its stand-alone functions, the board can also be connected to a PC via a USB connection. Included software audibly and visually demonstrates the powerful capabilities of the system. Technical support for the kit and all on-board Linx products is included. Master System Features: Master System Contains: • • • • • • • • • •
2 MS Handheld transmitters 2 MS Series decoders* 2 LR Series receivers* 1 CW Series antenna (HD Series with 315MHz) 1 Fully assembled evaluation board 1 9V battery 2 CONREVSMA001 RP-SMA connectors* Full documentation Free technical support Demonstration software CD
• • • • • • •
User prototyping area Breakout header On-board 3V regulator USB Interface Pre-assembled boards for immediate use Demonstration software Satisfies the kit purchase requirement for the MS, LR, and QS Series modules
CP (Compact)
* Listed quantity includes those populated on evaluation boards
Part # MDEV-***-HH-CP8-MS MDEV-***-HH-LR8-MS
Description MS Compact Handheld Transmitter Master Development System MS Long-Range Handheld Transmitter Master Development System
*** = 315, 418 (standard), 433MHz
Page 21
Price $149.95 $149.95
LR (Long-Range)
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
PRE-CERTIFIED OEM RF PRODUCTS HS Handheld Transmitter Master Development System NEW The HS Handheld RF transmitter is ideal for remote control and command applications that require the highest level of security. This RF transmitter is based upon the HS Series encoder, which uses CipherLinx® encrypted remote control technology that provides ultimate RF security and unprecedented features. As a part of our HS encoder-based OEM family, it has been precertified for FCC Part 15, Industry Canada, and European CE (433MHz only) compliance, reducing costs and time to market. Available in 315, 418 (standard), or 433.92MHz, this small remote has a compact external antenna (LR8) or internal antenna (CP8) and is capable of transmitting over distances of up to 1,000 feet (LR) or 750 feet (CP) when combined with the LR Series RF receiver. This comprehensive Master Development System is designed to assist in the rapid evaluation and integration of the HS Long-Range Handheld transmitters. The all-inclusive system features a pre-assembled evaluation board, which includes everything needed to quickly test the operation of the transmitter, receiver, and decoder. When you are ready to begin development, a convenient prototyping area with breakout headers and regulated power supply on the receiver / decoder board allows for rapid testing and interface. In addition to its stand-alone functions, the board can also be connected to a PC via a USB connection. Powerful demonstration software is included which audibly and visually demonstrates the capabilities of the system. Technical support for the system and all on-board Linx products is included. Master System Contains:
Master System Features:
• • • • • • • • • •
• • • • • • •
2 HS Handheld transmitters 2 HS Series decoders* 2 LR Series receivers* 1 CW Series antenna (HD Series with 315MHz) 1 Fully assembled evaluation board 1 9V battery 2 CONREVSMA001 RP-SMA connectors* Full documentation Free technical support Demonstration software CD
User prototyping area Breakout header On-board 3V regulator USB Interface Pre-assembled boards for immediate use CP (Compact) Demonstration software Satifies the kit purchase requirement for the HS, LR, and QS Series modules
* Listed quantity includes module mounted on development board
Part # MDEV-***-HH-CP8-HS MDEV-***-HH-LR8-HS
Description HS Compact Handheld Transmitter Master Development System HS Long-Range Handheld Transmitter Master Development System
*** = 315, 418 (standard), 433MHz
Page 22
Price $149.95 $149.95
LR (Long-Range)
IED IF
TA
S
WIRELESS MADE SIMPLE ®
ECERT PR
IN
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 www.linxtechnologies.com
NT RF
PRE-CERTIFIED OEM RF PRODUCTS OEM Relay Function Module The Relay Function Module is a member of the Linx Holtek-based pre-certified OEM product line. The modules have been tested for FCC and Industry Canada compliance and can be quickly customized to meet a specific OEM’s labeling requirements. This greatly reduces the time and expense of bringing an RF-based product to market. The Relay Function Modules provide four latched or momentary relay outputs that are capable of switching external AC- or DC-powered loads of up to 5 amps. They incorporate a Linx LR Series receiver and an on-board Holtek decoder IC. Selectable addressing provides security and allows the creation of 256 distinct transmitter / receiver relationships to avoid unwanted interaction when multiple systems are in use. The antenna rotates and swivels to a variety of positions to allow for maximum range. When paired with a compatible Linx OEM Handheld transmitter or transmitter module, the Relay Function Module serves as a reliable wireless switching device at distances of up to 1,000 feet. Quantity Price <200
$49.95
200-999
$38.30
1,000-4,999
$36.80
5,000+
Part #
Call
FCTN-RLY4-***
*** = 315, 418 (standard), 433MHz
OEM AC Function Module The AC Function Module plugs directly into a 110VAC wall receptacle and is capable of switching devices at loads up to 1,800 watts (15 amps) or 1HP at 120VAC. Devices connect via a standard NEMA 5-15 North American power plug. The antenna rotates and swivels to a variety of positions to allow for maximum range when plugged into a power strip or floor outlet. DIP switches allow for the selection of which transmitter buttons will activate the unit. Selectable addressing provides security and allows the creation of 16 distinct transmitter / receiver relationships to avoid unwanted interaction when multiple systems are in use. When paired with a compatible Linx OEM Handheld transmitter or transmitter module, the AC Function Module serves as a reliable wireless switching device at distances of up to 100 feet. Labeling can be modified to meet specific customer requirements. The unit is pre-approved as a Class B device to allow immediate integration and sale in most OEM products. Quantity
Price
<200
$44.95
200-999
$34.80
1,000-4,999
$32.60
5,000+
Part #
Call
FCTN-WALL-***
*** = 315, 418 (standard), 433MHz
Front
Back
AC Wall Adaptor The AC wall adaptor can power the OEM Relay Function Module from an AC wall socket.
Part # PWRACAWALL16V1A
Page 23
Description
Price
AC Wall Adaptor
$12.95
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
PERMANENT-MOUNT ANTENNAS Permanent-mount antennas are designed to mount directly to a product’s circuit board, thereby maximizing performance, eliminating the cost of a connector, and meeting FCC requirements for antenna attachment. These antennas are ideally suited to OEM applications that require a compact, cosmetically attractive, low-cost antenna solution. Custom colors and logo options are also available for volume OEM customers.
PW Series Whip Antenna Designed for permanent attachment, PW Series antennas give outstanding performance in a rugged and costeffective package. The antenna is attached by placing its base through a 1/4” hole in the product and securing it with a nut or by threading it into a PEM-style insert. This method of attachment is highly secure and saves the cost of an antenna connector. The antenna is fed through the base with RG-174 coax cable, which may be soldered directly to the board or attached using a 50-ohm connector. Standard cable length is 8.5”. Custom lengths and terminations are available by special order. The 2.4GHz version is 1/2-wave, the rest are 1/4-wave. Quantity
418
433
868
916
2.4
<200
$5.07
$4.97
$4.88
$4.78
$4.95
200-999
$4.81
$4.72
$4.63
$4.53
$4.57
1,000-4,999
$4.16
$4.08
$4.00
$3.92
$4.27
5,000+ Call Call Call Call Call Part # ANT-***-PW-QW *** = 418, 433, 868, 916MHz, 2.4GHz Comes standard in black
• • • • • • • •
Low cost Outstanding performance Omni-directional pattern Wide bandwidth Flexible main shaft Rugged & weatherized Integral 8½-inch RG-174 coax cable Use with plastic* or metal enclosures *Requires proximity ground plane
LP Series Reduced-Height Antenna LP Series antennas feature an internal helix, which greatly reduces the overall height while offering near monopole performance in a rugged package. The LP mounts to a PCB via a single screw and meets Part 15 requirements. Quantity
Price (All Frequencies)
<200
$1.79
200-999
$1.47
1,000-4,999
$1.33
5,000+ Call Part # ANT-***-PW-LP *** = 315, 418, 433, 868, 916MHz, 2.4GHz
• • • • • • •
Very low cost Compact housing Excellent performance Omni-directional pattern Weather resistant Screw-mount Use with plastic* or metal enclosures *Requires proximity ground plane
Standard in black
RA Series Antenna The RA Series offers maximum mounting and orientation flexibility in a cost-effective, reduced-height package. The antenna’s innovative articulating base allows it to tilt 180° and rotate 360° for optimum orientation. The RA mounts to a PCB via a single screw and meets Part 15 requirements. Quantity Price (All Frequencies) • Low cost <200
$2.89
200-999
$2.07
1,000-4,999
$1.86
5,000+ Part # ANT-***-PW-RA *** = 315, 418, 433, 868, 916MHz
Call
• • • • • •
Comes standard in black
Reduced-height helical whip Tilts and rotates Excellent performance Omni-directional pattern Screw-mount Use with plastic* or metal enclosures *Requires proximity ground plane
JJB Series Antenna This tiny permanent-mount antenna is ideal for applications requiring an internal or small external antenna with performance close to that of a 1/4-wave whip. Available in a right angle or straight form. The antenna attaches directly to a user’s PCB. Quantity Price (All Frequencies) <200
$1.60
200-999
$1.41
1,000-4,999
$1.08
5,000+
Call Part # ANT-***-JJB-xx *** = 868, 916MHz, 2.45GHz Comes standard in black xx = RA (Right Angle) or ST (Straight)
Page 24
• • • • • • •
Very low cost Ultra-compact package Easily concealed internally Good for internal or external mounting Excellent performance Omni-directional pattern Use with plastic* or metal enclosures *Requires proximity ground plane
RA Version (Actual Size)
ST Version (Actual Size)
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
PERMANENT-MOUNT ANTENNAS PML Series Antenna Designed for permanent attachment, the PML 1/2-wave whip tilts 180 degrees and delivers outstanding performance in a cost-effective package. An internal counterpoise eliminates external ground plane dependence and maximizes performance. The antenna is attached by placing its base through a 1/4” hole in the product and securing it with a nut or by threading it into a PEM-style insert. This method of attachment is highly secure and saves the cost of an antenna connector. The PML attaches to a PCB or connector via 8.5” of RG-178 coax cable. Custom lengths and terminations are available by special order. Quantity
Price (All Frequencies)
<200
$5.66
200-999
$5.37
1,000-4,999
$4.64
5,000+ Part # ANT-***-PML *** = 868, 916MHz
Call
• • • • • • •
Cost-effective Internal counterpoise Tilts 180 degrees Outstanding performance Omni-directional pattern Low VSWR Integral 8½-inch RG-178 coax cable
Comes standard in black
PMA Series Antenna PMA Series 1/4-wave whip antennas combine outstanding value and unique style. The stylish package is resistant to damage and abuse thanks to its highly flexible internal element. The PMA mounts to a PCB via a single screw and meets Part 15 requirements. Quantity
Price (All Frequencies)
<200
$1.76
200-999
$1.60
1,000-4,999
$1.52
5,000+
Call
Part # ANT-***-PMA *** = 868, 916MHz
• • • • • •
Low cost Omni-directional pattern Fully weatherized Flexible main shaft Rugged & damage-resistant Screw-mount
Comes standard in black
PMB Series Antenna PMB Series antennas combine a soft blade-type element with a rugged package that is resistant to damage and abuse. The antenna features a molded tab that allows coding of the product’s enclosure to control 360-degree rotational travel. The PMB mounts to a PCB via one or two screws and meets Part 15 requirements. Quantity
Price (All Frequencies)
<200
$2.64
200-999
$2.40
1,000-4,999
$2.28
5,000+ Call Part # ANT-***-PMB *** = 868, 916MHz Comes standard in charcoal grey
• • • • • • • •
Low cost Soft blade-type element Rotates 360 degrees Omni-directional pattern Weather resistant Flexible main shaft Damage-resistant Screw-mount
PMC Series Antenna PMC Series 1/4-wave antennas combine a blade-type element with a rugged package that is resistant to damage and abuse. The antennas feature a heavy-duty mounting base and the element can be rotated 360°. The PMC mounts to a PCB via a single screw and meets Part 15 requirements. Quantity
Price (All Frequencies)
<200
$2.71
200-999
$2.59
1,000-4,999
$2.35
5,000+
Call
Part # ANT-***-PMC *** = 868, 916MHz
Page 25
Comes standard in black
• • • • • • •
Low cost Heavy-duty blade-type element Rotates 360 degrees Omni-directional pattern Weather resistant Flexible main shaft Screw-mount
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
CONNECTORIZED ANTENNAS Antenna Factor’s connectorized antennas feature Part 15 compliant RP-SMA connectors that allow removal of the antenna for replacement or transport. Connector City offers a wide variety of PCB and chassis-mount mating connectors. Many of the antennas also feature reduced-height packages, which are significantly more compact than a straight “whip” style. Reduced-height antennas provide excellent performance; however, their operational bandwidth is narrower than a straight whip (typically 20-40MHz).
CW Series Whip Antenna CW Series 1/4-wave antennas deliver outstanding performance in a rugged and cosmetically attractive package. These antennas feature an FCC Part 15 compliant RP-SMA connector. This simplifies packaging and shipment, allowing for easy field replacement while complying with FCC requirements. A wide variety of matching connectors allows for numerous mounting options. The 916MHz and 2.4GHz versions are also available with a standard SMA connector. The 2.4GHz version is 1/2-wave, the rest are 1/4-wave. Quantity
418
433
868
916
2.4 $5.75
<200
$5.74
$5.61
$5.48
$5.36
200-999
$5.51
$5.39
$5.27
$5.15
$5.31
1,000-4,999
$4.93
$4.82
$4.71
$4.60
$4.97
5,000+ Call Call Call Call Call Part # ANT-***-CW-QW *** = 418, 433, 868, 916MHz xxx = Blank for RP-SMA connector SMA for SMA connector (916MHz, 2.4GHz only)
• • • • • • • • • •
Low cost Excellent performance Omni-directional pattern Wide bandwidth Very low VSWR Fully weatherized Flexible main shaft Rugged & damage-resistant Part 15 compliant RP-SMA connector Use with plastic* or metal enclosures *Requires proximity ground plane
SMA RP-SMA (916, 2.4 Only)
Comes standard in black; custom colors available in production quantities
Standard SMA connector is available at 916MHz. Call for pricing.
Actual Size
RH Series Reduced-Height Antenna
The RH Series utilizes a helical element to greatly reduce the physical length of the antenna housing. They are ideal for small products where cosmetic or functional requirements dictate a compact, aesthetically pleasing antenna package. Despite their tiny size, RH Series antennas are ruggedly constructed and able to withstand punishing environments just like our larger whips. RH Series antennas attach via a Part 15 compliant RP-SMA connector. The 2.45GHz version is also available with a standard SMA connector. • • <200 $4.73 $3.47 • 200-999 $4.39 $3.22 • • 1,000-4,999 $3.94 $2.89 • 5,000+ Call Call • Part # ANT-***-CW-RH-xxx • *** = 315, 418, 433, 868, 916MHz, 2.4GHz • xxx = Blank for RP-SMA connector; SMA for SMA connector •
Quantity
315 - 916MHz
2.4GHz
Comes standard in black; custom colors available in production quantities
Reduced-height helical whip Excellent performance Omni-directional pattern Low VSWR Fully weatherized Rugged & damage-resistant Part 15 compliant RP-SMA connector Standard SMA connector available for 2.45GHz Available in black or custom colors Use with plastic* or metal enclosures *Requires proximity ground plane
SMA
HD Series Heavy Duty Antenna This reduced-height 1/4-wave antenna is ready for years of use thanks to a flexible internal helical that is overmolded with a heavy-duty protective jacket. It’s an excellent choice for outdoor applications or for use in adverse environments where the antenna must resist shock, harsh weather, and tampering. HD Series antennas attach via an FCC Part 15 compliant RP-SMA connector. Quantity
Price (All Frequencies)
<200
$5.50
200-999
$5.13
1,000-4,999
$4.63
5,000+
Call
Part # ANT-***-CW-HD *** = 315, 418, 433, 868, 916MHz Comes standard in black; custom colors available in production quantities
Page 26
• • • • • • • • • •
Reduced-height helical whip Excellent performance Omni-directional pattern Very low VSWR Heavy-duty construction Damage-resistant Fully weatherized Flexible main shaft Part 15 compliant RP-SMA connector Use with plastic* or metal enclosures *Requires proximity ground plane
RP-SMA
RP-SMA
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
CONNECTORIZED ANTENNAS HW Series 1/2-Wave Dipole Antenna HW Series 1/2-wave center-fed dipole antennas deliver outstanding performance in a rugged and cosmetically attractive package. allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315, 418, and 433MHz versions have a 1/4-wave element. The 868 and 916MHz versions have a center-fed 1/2-wave element with an internal ground reference which reduces external ground plane dependence and maximizes performance. HW Series antennas attach via a standard SMA or Part 15 compliant RP-SMA connector. Custom colors and connectors are available for volume OEM customers. Quantity
Price (All Frequencies)
<200
$6.25
200-999
$5.48
1,000-4,999
$5.23
5,000+ Call Part # ANT-***-CW-HW-xxx *** = 315, 418, 433, 868, 916MHz xxx = SMA (SMA) or Blank (RP-SMA) connector
• • • • • • •
Low cost Internal counterpoise Excellent performance Omni-directional pattern Outstanding VSWR Rugged & damage-resistant Part 15 compliant RP-SMA connector
SMA
RP-SMA
Comes standard in black; custom colors available in production quantities
CT Series 1/2-Wave Dipole Antenna The CT Series 1/2-wave 2.4GHz antenna delivers outstanding performance in a rugged and cosmetically-attractive package. The antenna’s internal counterpoise eliminates external ground plane dependence and maximizes performance. CT Series antennas attach using a standard SMA or Part 15 compliant RP-SMA connector, though alternate connectors and custom colors are available for volume OEM customers. • Internal counterpoise Quantity Price <200
$5.10
200-999
$4.41
1,000-4,999
$3.96
5,000+ Call Part # ANT-2.4-CW-CT-xxx xxx = SMA (SMA) or RPS (RP-SMA) connector
• • • • • •
Excellent performance Omni-directional pattern Very low VSWR Fully weatherized Rugged & damage-resistant Standard SMA or Part 15 compliant RP-SMA connector
Comes standard in black; custom colors available in production quantities SMA
Page 27
RP-SMA
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
RIGHT-ANGLE CONNECTORIZED ANTENNAS Antenna Factor’s connectorized antennas feature Part 15 compliant right-angle RP-SMA connectors to allow removal for replacement or transport. Many of the antennas also feature reduced-height packages that are significantly more compact than a straight “whip” style. Reduced-height antennas provide excellent performance; however, their operational bandwidth is narrower than a straight whip (typically 20-40MHz), so greater care should be exercised in layout and placement. *Note* The listed frequencies are the antenna’s typical center frequencies.
RAH Series Right-Angle Antenna The RAH Series utilizes a helical element to greatly reduce the physical length of the antenna housing. They are ideal for products requiring an ultra-compact, aesthetically pleasing 1/4-wave antenna in a right-angle form factor. Despite their tiny size, they are ruggedly constructed and able to withstand punishing environments just like our larger whips. The antennas attach via a Part 15 compliant RP-SMA connector. The 2.45GHz version is also available with a standard SMA connector. Actual Size Quantity
315 - 916MHz
2.4GHz
<200
$6.20
$3.57
200-999
$5.75
$3.32
1,000-4,999
$5.16
$2.98
5,000+ Call Part # ANT-***-CW-RAH-xxx *** = 315, 418, 433, 868, 916MHz, 2.4GHz xxx = Blank for RP-SMA connector SMA for SMA connector (2.4GHz only)
Call
• • • • • • • • • •
Low cost Ultra-compact Right-angle mount Excellent performance Omni-directional pattern Fully weatherized Flexible main shaft Rugged & damage-resistant Part 15 compliant RP-SMA connector Use with plastic* or metal enclosures *Requires proximity ground plane SMA RP-SMA (2.45GHz Only)
Comes standard in black; custom colors available in production quantities
RCS Series Ultra-Compact Right-Angle Antenna The RCS Series is ideally suited for products requiring an attractive, yet compact, 1/4-wave antenna in a right-angle form factor. The antennas attach via a Part 15 compliant RP-SMA connector. The 2.45GHz version is also available with a standard SMA connector. • Reduced-height helical whip Quantity Price <200
$5.25
200-999
$4.49
1,000-4,999
$4.03
5,000+ Call Part # ANT-***-CW-RCS-xxx *** = 315, 418, 433, 868, 916MHz, 2.4GHz xxx = Blank for RP-SMA connector SMA for SMA connector (2.4GHz only)
• • • • • • •
Right-angle mount Excellent performance Omni-directional pattern Fully weatherized Part 15 compliant RP-SMA connector Standard SMA connector available for 2.45GHz Use with plastic* or metal enclosures *Requires proximity ground plane
Comes standard in black; custom colors available in production quantities SMA RP-SMA (2.45GHz Only)
RCL Series Compact Right-Angle Antenna The RCL Series is useful in products where additional height above the product’s case is needed or a slightly wider operational bandwidth is desired. The 2.45GHz version has a center-fed 1/2-wave element with an internal ground reference. The 916MHz version has a 1/4-wave element. The antennas attach via a Part 15 compliant RP-SMA connector. Quantity
Price
<200
$5.50
200-999
$4.88
1,000-4,999
$4.38
5,000+ Part # ANT-***-CW-RCL *** = 916MHz, 2.4GHz
Call
• • • • • • •
Right-angle mount Excellent performance Omni-directional pattern Fully weatherized Rugged & damage-resistant Part 15 compliant RP-SMA connector Use with plastic* or metal enclosures *916MHz requires proximity ground plane *2.45GHz features internal counterpoise
Comes standard in black; custom colors available in production quantities RP-SMA
Page 28
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
ARTICULATING CONNECTORIZED ANTENNAS HWR Series 1/2-Wave Right-Angle Tilt / Swivel Antenna HWR Series antennas deliver outstanding performance in a rugged and cosmetically attractive package. The articulating base allows the antenna to tilt 90 degrees and rotate 360 degrees. The 315, 418, and 433MHz versions have a 1/4-wave element. The 868 and 916MHz versions have a center-fed 1/2-wave element with an internal ground reference. The antennas attach via a standard SMA or Part 15 compliant RP-SMA connector. Custom colors and connectors are available for volume OEM customers. Quantity
Price
<200
$7.35
200-999
$6.57
1,000-4,999
$6.30
5,000+ Call Part # ANT-***-CW-HWR-xxx *** = 315, 418, 433, 868, 916MHz, 1.4GHz xxx = SMA (SMA) or RPS (RP-SMA) connector Comes standard in black; custom colors available in production quantities
• • • • • •
Low cost Tilts and rotates Omni-directional pattern Outstanding VSWR Rugged & damage-resistant Standard SMA or Part 15 compliant RPSMA connector • Custom terminations for volume OEMs SMA • Use with plastic* or metal enclosures *315, 418, 433MHz require proximity ground plane *868, 916MHz, 1.4GHz feature internal counterpoise
RP-SMA
RCT Series 1/2-Wave Right-Angle Tilt / Swivel Antenna The RCT Series 1/2-wave antenna delivers outstanding performance with an innovative articulating base that allows it to tilt 90° and rotate 360° for optimum orientation. The antenna’s internal counterpoise eliminates external ground plane dependence and maximizes performance. The RCT attaches via a standard SMA or Part 15 compliant RP-SMA connector. Quantity
Price
<200
$6.50
200-999
$5.75
1,000-4,999
$5.16
5,000+ Call Part # ANT-2.4-CW-RCT-xx xx = SS (SMA) or RP (RP-SMA) connector
• • • • • • • •
Internal counterpoise Tilts and rotates Excellent performance Omni-directional pattern Very low VSWR Fully weatherized Rugged & damage-resistant Standard SMA or Part 15 compliant RP-SMA connector
Comes standard in black; custom colors available in production quantities
SMA
RP-SMA
RAF Series Dual-Band Right-Angle Tilt / Swivel Antenna The RAF is a compact, cosmetically attractive, dual-band, 1/2-wave antenna covering the popular 2.45 and emerging 5.8GHz bands. The antenna features a tilt and swivel joint which allows it to be oriented at straight or right angles to the product or conveniently folded for storage and shipment. It attaches using an SMA or Part 15 compliant RP-SMA connector. Quantity
Price
<200
$6.92
200-999
$6.27
1,000-4,999
$5.48
5,000+ Call Part # ANT-DB1-RAF-xxx xxx = blank (RP-SMA) or SMA (SMA) connector
• • • • • • •
Tilts and rotates Dual-band (2.45GHz and 5.8GHz) Excellent performance Omni-directional pattern Very low VSWR Rugged & damage-resistant Standard SMA or Part 15 compliant RP-SMA connector
Comes standard in black; custom colors available in production quantities
SMA
Page 29
RP-SMA
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
INTERNAL ANTENNAS The size, cosmetic, or physical requirements of many wireless designs precludes the use of traditional antenna styles. To meet the unique antenna needs of many product designs, Antenna Factor offers a variety of antennas designed for internal mounting.
HE (Helical Element) Series Antenna HE Series antennas are designed for direct PCB mounting. Thanks to the HE’s compact size, they are ideal for internal concealment inside a product’s housing. The HE is also very low in cost, making it well suited to high-volume applications. *NOTE* HE Series antennas have a very narrow bandwidth (approximately 10MHz of the specified center frequency); thus, care in placement and layout is required. In addition, they are not as efficient as whip-style antennas, so they are generally better suited for use on the transmitter end where attenuation is often required anyway. Use on both transmitter and receiver ends is recommended only in instances where a short range (<30% of whip style) is acceptable.
Quantity
Price (All Frequencies)
<200
$0.67
200-999
$0.48
1,000-4,999
$0.30
• • • • •
Very low cost Compact for physical concealment Precision-wound coil Rugged phosphor-bronze construction Surface-mount and through-hole mount styles
5,000+ Part #
Call ANT-***-HETH (Through-Hole) ANT-***-HESM (Surface-Mount) *** = 315, 418, 433, 916MHz
Side View End Views Through-Hole Style Surface Style
Antenna dimensions may vary by frequency
SP Series SMD Planar Antenna (The “Splatch”) The Splatch uses a grounded-line technique to achieve outstanding performance from a tiny surface mount element. This unique antenna is designed for hand- or reflow-mounting directly to a product’s circuit board. Its low cost makes it ideal for volume applications. Unlike many compact antennas, the Splatch exhibits good proximity performance, making it an appropriate choice for handheld applications such as remote controls, pagers, and alert devices. Quantity
Price
<200
$1.75
200-999
$1.38
1,000-4,999
$1.25
• • • • • • •
5,000+ Call Part # ANT-***-SP *** = 315, 403, 418, 433, 458, 868, 916MHz
Very low cost Ultra-compact package Direct PCB attachment Ideal for concealed / internal mounting Perfect for compact portable devices Suitable for hand- or reflow-assembly Resistant to proximity effects
CHP Series Antenna The exciting CHP Series is among the world’s smallest high-performance chip antennas. Favorable electrical specifications, stability, and cost-effectiveness make the CHP Series the logical choice for a wide variety of applications, including Bluetooth, 802.11, home RF, ZigBee, and other popular and emerging standards. The antennas use advanced multilayer LTCC technology and a proprietary hybrid element to achieve size and performance characteristics superior to other designs. The incredibly compact SMD package measures a mere 6.5mm (L) x 2.2mm (W) x 1.0mm (H) and is fully compatible with hand- and reflow-attachment processes. Quantity
868MHz
916MHz 2.45GHz
<200
$3.51
$3.51
$1.45
200-999
$3.24
$3.24
$1.28
1,000-4,999
$3.11
$3.11
$1.14
5,000+ Call Call Call Part # ANT-***-CHP-x *** = 868MHz, 916MHz, 2.45GHz x = T (Tape / Reel), B (Bulk <1,500 pcs.) Ro
• • • • • • • • • • •
Outstanding cost-effectiveness Incredibly compact SMD package Superior LTCC technology Low loss Wide bandwidth 50-ohm characteristic impedance Favorable linear polarization No external matching required Highly stable over temperature and time Fully hand- and reflow-assembly compatible RoHS compliant
Actual Size 2.45GHz
HS
868MHz C
OMP IAN T L
Page 30
916MHz
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
ANTENNA EVALUATION KITS Permanent-Mount Antenna Evaluation Kit Compare whip antenna styles and performance. This handy kit contains two (2) of each permanent-mount 1/4-wave antenna styles at the frequency of your choice. Kit Includes: • • • • •
2 2 2 2 2
PW-QW Series permanent-mount antennas LP Series reduced-height antennas RA Series right-angle tilt-swivel antennas SP Series SMD planar antennas JJB Series ultra-miniature antennas (868, 916MHz only)
Part #
Description
Price
PAEK-*** Permanent-Mount Antenna Evaluation Kit *** = 418, 433, 868, 916MHz
$49.95
Connectorized Antenna Evaluation Kit Compare whip antenna styles and performance. This handy kit contains two (2) of each whipantenna style at the frequency of your choice and a sampling of Linx RP-SMA connectors. Kit Includes: 1/4-wave whip antennas • 2 RH Series reduced-height antennas • 2 HD Series heavy-duty antennas • 2 CW Series connectorized antennas • 2 RCS Series right-angle antennas (916MHz only) • 2 RCL Series right-angle antennas (916MHz only)
Part #
RP-SMA Connectors • 2 Right-angle • 2 Vertical PCB • 2 Bulkhead • 2 PCB edge-mount • 2 Multi-mount
Description
CAEK-*** Connectorized Antenna Evaluation Kit *** = 418, 433, 868, 916MHz
Price $49.95
Chip Antenna Evaluation Kit
Actual Size
This handy kit contains six (6) chip antennas and a test board to allow you to evaluate the performance of the chip antenna. Kit Includes: • 6 Chip antennas • 1 Evaluation board • 1 Antenna data guide * Listed quantity includes those populated on test board
Part #
Description
AEK-***-CHP Chip Antenna Evaluation Kit *** = 868, 916MHz, 2.4GHz
Price $18.95
SP Series Antenna Evaluation Kit This handy kit contains six (6) SP Series antennas and a test board to allow you to evaluate the performance of the antenna. Kit Includes: • 6 SP Series antennas* • 1 Evaluation board • 1 Antenna data guide * Listed quantity includes those populated on test board
Part #
Description
AEK-***-SP SP Series Antenna Evaluation Kit *** = 315, 403, 418, 433, 458, 868, 916MHz
Page 31
Price $18.95
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
SPECIALTY ANTENNAS WRT Series Antenna
NEW
The WRT Series antenna is ideally suited for applications such as wireless vending, security, traffic, or power equipment which require an unobtrusive, tamper-resistant antenna solution. The tiny 19 x 11mm radome installs through a small hole on the product and is anchored by a threaded base. An adhesive foam compression ring is used to resist the elements. The antenna also features an integral counterpoise, which eliminates the need for a proximity ground plane. The antenna's coax feed is available with SMA or RP-SMA terminations. Alternate coax lengths, connectors, and custom colors are available for volume OEM customers. Quantity
Price (All Frequencies)
<200
$9.80
200-999
$8.21
1,000-4,999
$7.88
5,000+ Call Part # ANT-***-WRT-xxx *** = 868MHz, 916MHz, 2.45GHz xxx = SMA (SMA) or RPS (RP-SMA) connector
• • • • • •
Low cost Unobtrusive Tamper resistant Integral counterpoise Indoor / outdoor Adhesive or permanent mount
Ant-Skins Antenna Covers These low-cost sleeves provide the external ruggedness and cosmetic appeal of expensive whip antennas but are hollow to cover the low-cost internal element of a user’s choosing, such as a wire, rod, or flexible shaft. The sleeve is designed to allow a wide range of mounting options in metal or plastic housings of various thicknesses. Ant-skins can also reduce your parts inventory since a wide range of frequency lengths can be accommodated by a single sleeve.
Quantity
Price (All Lengths)
<200
$0.74
200-999
$0.59
1,000-4,999
$0.50
5,000+
Call
Part # ANT-SKN-V1-xxxx xxxx = 1.50, 3.15, 4.25in Comes standard in black
Page 32
• Recesses provided to accommodate 6 different thicknesses of case materials by simply “pulling” the ant-skin through the case until it is in the correct position • Generous cavity to accommodate many different elements including flexible cable, wire, or rod • Squared base for permanent spin-proof mounting option • Cost-effective • Provides a cosmetically attractive, professional appearance
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
STICK-ON ANTENNAS These antennas are designed for mounting on flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. Their compact size and unobtrusive appearance make them well suited to a wide range of applications, from automotive interiors to in-building networks.
MHW Series Antenna MHW Series dipole antennas feature a durable, unobtrusive housing that sticks permanently with integral adhesive to flat, nonconductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antennas are well suited to low-power devices, but are capable of operation at levels to 10 watts. The MHW is supplied with either 6.5 feet (2m) or 15 feet (4.6m) of RG-174 cable and attaches via a standard SMA or Part 15 compliant RP-SMA connector. Custom cable lengths and connectors are available for volume OEM customers. Quantity
Price (All Frequencies)
<200
$7.94
200-999
$7.18
1,000-4,999
$6.32
5,000+ Part # ANT-***-MHW-RPS-x ANT-***-MHW-SMA-x
• • • • • • • • • •
Call
*** = 418, 433, 916MHz, x = “S” for Short cable, “L” for Long cable
Compact & unobtrusive Adhesive for flat surfaces Excellent performance Omni-directional pattern Very low VSWR Two flexible shafts Rugged & damage-resistant 6.5- or 15-foot RG-174 coax cable Standard SMA or Part 15 compliant RP-SMA connector Custom lengths and terminations for volume OEMs
Comes standard in black
HDP Series Dual-Band Stick-On Antenna The HDP is a compact, center-fed, dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its durable, unobtrusive housing sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antenna is supplied with 9.8 feet (3m) of RG-174 cable and attaches via a TNC or Part 15 compliant RPSMA connector. Quantity
Price
<200
$6.75
200-999
$5.63
1,000-4,999
$5.06
5,000+ Part # ANT-DB1-HDP-xxx xxx = RPS, TNC
• • • • • • • • • • •
Call
Comes standard in black
Dual-band (860-960MHz and 1.77-1.88GHz) Center-fed Compact & unobtrusive Adhesive for flat surfaces Excellent performance Omni-directional pattern Low VSWR Fully weatherized Rugged & damage-resistant 9.8-foot RG-174 coax cable TNC or Part 15 compliant RP-SMA connector
VDP Series Tri-Band Stick-On Antenna The VDP is a compact, tri-band antenna covering the 860 to 960MHz, 1.77 to 1.88GHz, and 2.45GHz bands. Its durable, unobtrusive housing sticks permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antenna is supplied with 9.8 feet (3m) of RG-174 cable center-fed from the bottom. The VDP attaches via a TNC or Part 15 compliant RP-SMA connector. Quantity
Price
<200
$7.44
200-999
$5.85
1,000-4,999
$5.29
5,000+ Part # ANT-DB1-VDP-xxx xxx = RPS, TNC Comes standard in black
Page 33
Call
• • • • • • • • • • •
Tri-band (860-960MHz, 1.77-1.88GHz, and 2.45GHz) Center-fed from the bottom Compact & unobtrusive Adhesive for flat surfaces Excellent performance Omni-directional pattern Low VSWR Fully weatherized Rugged & damage-resistant 9.8-foot RG-174 coax cable TNC or Part 15 compliant RP-SMA connector
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
MAGNETIC-MOUNT ANTENNA SYSTEM Magnetic-Mount Antenna System The Magnetic-Mount Antenna system allows customers to select between 40, 66, or 85mm bases that contain a powerful magnet suitable for semi-permanent installation on metal surfaces. The base is covered with a thin protective layer to protect finished surfaces, such as those on automobiles. Completing the system is a variety of interchangeable elements covering frequencies from 824MHz to 2.4GHz. The base is supplied with 13.1ft of RG-58 coax cable terminated in a TNC or RG-174 coax cable terminated in an RP-SMA connector. Other cable terminations are available on volume OEM orders.
B50
B66
B85
Part # Frequency Range Gain
S01-011 2.4GHz
S01-010 S01-005 860-960MHz 860-960MHz
0dBi
0dBi
3dBi
S01-006 824-960MHz 5dBi
S01-008 824-960MHz 1.7-1.8GHz 3dBi
S01-012 824-896MHz 1.9GHz 5dBi
Quantity
S01-005
S01-006
S01-008
S01-010
S01-011
S01-012
B50
B66
B85
<200
$2.25
$2.70
$2.90
$2.22
$2.20
$3.90
$4.40
$4.95
$5.50
200-999
$1.88
$2.25
$2.50
$1.85
$1.83
$3.60
$4.20
$4.73
$5.25
1,000-4,999
$1.69
$2.03
$2.25
$1.66
$1.64
$3.37
$3.70
$4.16
$4.63
5,000+
Call
Call
Call
Call
Call
Call
Call
Call
Call
Part # ANT-ELE-S01-xxx
xxx = Last 3 part numbers above
ANT-MAG-Bxx-xxx xx= 50, 66, 85mm base
Comes standard in black
xxx = RPS or TNC connector
THROUGH-HOLE MOUNT ANTENNAS RMS Series Dual-Band Through-Hole Mount Antenna The RMS is a compact, unobtrusive, dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its durable, unobtrusive housing is designed for permanent mounting through a metal surface such as an automobile roof or trunk. The antenna is supplied with 14 feet (4.3m) of RG-58 cable and attaches via a TNC or Part 15 compliant RP-SMA connector. Quantity Price • Dual-band (860-960MHz and 1.77-1.88GHz) <200
$8.94
200-999
$7.80
1,000-4,999
$7.15
5,000+ Part # ANT-DB1-RMS-xxx xxx = RPS, TNC
Call
Comes standard in black
• • • • • • • •
Compact & unobtrusive Through-hole mount Excellent performance Omni-directional pattern Fully weatherized Flexible main shaft Rugged & damage-resistant 14-foot RG-58 coax cable
RMT “Techno” Series Dual-Band Through-Hole Mount Antenna The RMT is a futuristic-looking dual-band antenna covering the 860 to 960MHz and 1.77 to 1.88GHz bands. Its compact, durable housing is designed for permanent mounting through a metal surface such as an automobile roof or trunk. The antenna is supplied with 14 feet (4.3m) of RG-58 cable and attaches via a TNC or Part 15 compliant RP-SMA connector. Quantity Price • Dual-band (860-960MHz and 1.77-1.88GHz) <200
$7.95
200-999
$6.80
1,000-4,999
$6.44
5,000+ Part # ANT-DB1-RMT-xxx xxx = RPS, TNC Comes standard in black
Page 34
Call
• • • • • • • • •
Futuristic appearance Through-hole mount Excellent performance Omni-directional pattern Low VSWR Fully weatherized Flexible main shaft Rugged & damage-resistant 14-foot RG-58 coax cable
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
GPS ANTENNAS GPS capabilities are being integrated into a diverse array of products. As with any RF system, the antenna plays a critical role in the performance and reliability of the product. Antenna Factor offers a variety of high-performance, low-cost GPS antennas to meet the needs of this rapidly expanding market. Additional cable terminations are available to volume OEM customers by special order.
UC Series Active GPS Antenna UC Series GPS antennas deliver high-gain, low-noise performance in a rugged and cosmetically attractive package. They feature a wide operating temperature, wide operating voltage, and low current consumption. The antennas attach via a standard SMA or MCX connector. • • • • • • • •
Compact High-gain, low-noise design Low current consumption Wide operating voltage Wide operating temperature Fully weatherized Rugged & damage-resistant Magnetic mount
Quantity
Price
<200
$21.50
200-999
$19.76
1,000-4,999
$17.25
5,000+ Part # ANT-GPS-UC-xxx xxx = SMA, MCX
Call
SH Series Active GPS Antenna SH Series GPS antennas combine superior performance, advanced operational and protection features, and low power consumption. The SH accepts supply voltages from +2.5VDC to +12VDC and is protected against shorts, over current, or reverse polarity situations. The antennas attach via a SMA, MCX, or MMCX connector. • Compact Quantity Price • • • • • • • •
High-gain, low-noise design Low current consumption Wide operating voltage Protection circuit Wide operating temperature Fully weatherized Rugged & damage-resistant Magnetic and / or screw mount
<200
$25.20
200-999
$23.80
1,000-4,999
$19.20
5,000+ Part # ANT-GPS-SH-xxx xxx = SMA, MCX, MMX
Call
RMG Series GPS Antenna and Base The RMG Series combines a high-performance internal GPS antenna with a connector for mounting a secondary antenna. A wide range of connectorized antennas can be attached enabling the coverage of all popular frequencies. The GPS antenna and connector are housed in a sleek, durable base intended for permanent through-hole mounting. A 5m RG-174 cable is provided for Quantity Price each antenna and each may be terminated in a variety of connector <200 $29.95 types. The cables feed through a threaded metal post with a compression gasket, which resists the intrusion of water or dirt, and protects the 200-999 $27.80 attachment surface. 1,000-4,999 $26.80 • • • • • • •
On-board amplified GPS antenna Connector for second antenna element Wide range of secondary frequencies Rugged and water-resistant Separate RG-174 cables for each antenna Threaded metal stud mount Standard and custom cable terminations
Page 35
5,000+ Call Part # ANT-DB2-RMG-xx-yy-zz xx = Antenna Connector; RP-SMA* (RP), SMA* (SM) yy = Antenna Cable; RP-SMA* (RP), SMA (SM), MCX (MC) zz = GPS Cable; SMA* (SM), MCX (MC), FME (FM) * = Standard Connector
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
BASE STATION ANTENNAS Antenna Factor offers Yagi antennas in models covering frequencies from 400MHz to 2.45GHz. These antennas are designed for long distance directional communication and can greatly enhance the performance of RF links. Made of stainless steel and featuring sturdy mast mounts, these rugged antennas are constructed to withstand the stress of long-term use. All antennas are designed for 50-ohm system matches with maximum inputs of 100W. See Connector City for stock extension cables.
418MHz 5-Element Yagi Antenna
Quantity
Price
<200
$69.95
200-999
$58.30
1,000-4,999
$54.95
5,000+
Call
Part #
ANT-418-YG5-N
Center Frequency Frequency Range Bandwidth Impedance Polarization VSWR F/B Ratio
ELECTRICAL SPECIFICATIONS 418MHz Gain 397-439MHz Beamwidth 28MHz Max. Power 50Ω Weight Connector Vert. or horiz. Element Material <1.5 Max. Wind Velocity >14dB
10dBi 54° 100W 2.0lbs N-Style Female Stainless Steel 60m/s
Center Frequency Frequency Range Bandwidth Impedance Polarization VSWR F/B Ratio
ELECTRICAL SPECIFICATIONS 916MHz Gain 881-951MHz Beamwidth 70MHz Max. Power 50Ω Weight Connector Vert. or horiz. Element Material <1.5 Max. Wind Velocity 14dB
9dBi 54° 100W 1.5lbs N-Style Female Stainless Steel 60m/s
Center Frequency Frequency Range Bandwidth Impedance Polarization VSWR F/B Ratio
ELECTRICAL SPECIFICATIONS 2442MHz Gain 2400-2483MHz Beamwidth 83MHz Max. Power 50Ω Weight Connector Vert. or horiz. Element Material <1.5 Max. Wind Velocity >16dB
9.5dBi 50° H 100W 1.4lbs N-Style Female Stainless Steel 60m/s
Center Frequency Frequency Range Bandwidth Impedance Polarization VSWR F/B Ratio
ELECTRICAL SPECIFICATIONS 2442MHz Gain 2400-2483MHz Beamwidth 83MHz Max. Power 50Ω Weight Connector Vert. or horiz. Element Material <1.5 Max. Wind Velocity 18dB
12dBi 36° 100W 1.32lbs N-Style Female Stainless Steel 60m/s
916MHz 5-Element Yagi Antenna
Quantity
Price
<200
$69.95
200-999
$58.30
1,000-4,999
$54.95
5,000+
Call
Part #
ANT-916-YG5-N
2.4GHz 6-Element Yagi Antenna Quantity
Price
<200
$69.95
200-999
$58.30
1,000-4,999
$54.95
5,000+
Call
Part #
ANT-2.4-YG6-N
2.4GHz 12-Element Yagi Antenna Quantity
Price
<200
$89.95
200-999
$84.70
1,000-4,999
$79.45
5,000+
Call
Part #
ANT-2.4-YG12-N
*NOTE* Use of these antennas may result in TX and RX emission levels in excess of legal limits
Page 36
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 489-1634 • FAX: (541) 471-6251 www.antennafactor.com
BASE STATION ANTENNAS Corner Antennas Antenna Factor “corner-style” antennas feature a wide >70MHz bandwidth, 25dB front-to-back ratio, high gain, and a wide beamwidth. They are designed for 50-ohm system matches with a maximum input of 100W. *NOTE* Use of these antennas may result in TX and RX emission levels in excess of legal limits
Quantity
Price
<200
$79.95
200-999
$69.80
1,000-4,999
$64.95
5,000+
Call
Part #
Description
ANT-916-CN-N ANT-2.4-CN-N
916MHz Corner Antenna 2.45GHz Corner Antenna ELECTRICAL SPECIFICATIONS
ITEM Model
SPECIFICATION ANT-916-CN-N
ANT-2.4-CN-N
Center Frequency
916MHz
2442MHz
Frequency Range
881-951MHz
2400-2483MHz
Bandwidth
72MHz
264MHz
Gain
10.2dBi
11dBi
58° H, 52° V
58° H, 54° V
Horizontal Beamwidth Weight VSWR
2.6lbs
1.75lbs <1.5
F/B Ratio
>25dB
Polarization
Vertical
Impedance
50Ω
Max. Power
100W
Cable Connector
Page 37
RG-8/U N-Style Female (other connectors available for volume applications)
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
RP-SMA CONNECTORS Linx offers a variety of cost-effective PCB, cable-end, and bulkhead Reverse-Polarity SMA (RP-SMA) connectors. These high-quality connectors are designed to mate with RP-SMA antennas, such as the Antenna Factor CW, RH, and HD Series. In order to ensure the acceptability of RP-SMA connectors under FCC Part 15.203, these connectors are available only to qualified OEM customers. These connectors are not available for sale to the general public. Dimension drawings are available from the Connector City website at www.connectorcity.com.
CONREVSMA001
CONREVSMA005
Female PCB Mount
Female Bulkhead Rear Mount Cable End Crimp (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONREVSMA001
$2.30
$2.09
$1.88
CONREVSMA001-SMD Female Surface Mount
Part #
<200
200-999
1,000-5,000
CONREVSMA001-SMD
$3.18
$2.89
$2.60
Part #
<200
200-999
1,000-5,000
CONREVSMA005
$3.51
$3.19
$2.87
CONREVSMA005-R178
N/A
N/A
$3.04
CONREVSMA005-R58
N/A
N/A
$3.04
CONREVSMA006.031 CONREVSMA006.062 CONREVSMA006.062SQ Female PCB Edge Multi-Mount (for board thicknesses of 0.031” and 0.062”)
CONREVSMA002 Female Right-Angle PCB Mount
Part #
<200
200-999
1,000-5,000
CONREVSMA002
$2.60
$2.36
$2.13
Part #
<200
200-999
1,000-5,000
CONREVSMA006.xxx
$3.30
$3.00
$2.70
CONREVSMA006.062SQ
$4.04
$3.68
$3.31
CONREVSMA007 CONREVSMA002-L
Male Cable End Crimp for RG-174, 178, 58
Female Right-Angle PCB Mount - Extended
Part #
<200
200-999
1,000-5,000
CONREVSMA007
$2.45
$2.23
$2.00
CONREVSMA007-R178
$2.45
$2.23
$2.00
CONREVSMA007-R58
$2.45
$2.23
$2.00
Part #
<200
200-999
1,000-5,000
CONREVSMA002-L
$3.27
$2.97
$2.67
CONREVSMA008
CONREVSMA003.031 CONREVSMA003.062
Extended Female PCB Mount
Female PCB Edge-Mount
Part #
<200
200-999
1,000-5,000
(for board thicknesses of 0.031” and 0.062”)
CONREVSMA008
$2.90
$2.63
$2.37
Part #
<200
200-999
1,000-5,000
CONREVSMA003.031
$2.41
$2.19
$1.97
CONREVSMA009
CONREVSMA003.062
$2.86
$2.60
$2.34
Right-Angle Female PCB Edge Multi-Mount
CONREVSMA003.031-L CONREVSMA003.062-L
Part #
<200
200-999
1,000-5,000
CONREVSMA009
$4.08
$3.71
$3.34
Female PCB Edge-Mount - Extended (for board thicknesses of 0.031” and 0.062”)
Part #
<200
200-999
1,000-5,000
CONREVSMA003.031-L
$3.68
$3.34
$3.01
CONREVSMA003.062-L
$3.68
$3.34
$3.01
CONREVSMA004 Female Rear Mount Bulkhead (Solder Cup)
Part #
<200
200-999
1,000-5,000
CONREVSMA004
$2.52
$2.30
$2.07
Page 38
CONREVSMA010 Right-Angle Male - Female Adapter
Part #
<200
200-999
1,000-5,000
CONREVSMA010
$3.42
$3.11
$2.79
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
RP-SMA CONNECTORS CONREVSMA011 Female Cable End Crimp (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONREVSMA011
$1.86
$1.69
$1.52
CONREVSMA011-R178
N/A
N/A
$1.67
CONREVSMA011-R58
$2.04
$1.86
$1.67
CONREVSMA012 Right-Angle Male Cable End Crimp (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONREVSMA012
$3.68
$3.34
$3.01
CONREVSMA012-R178
N/A
N/A
$3.01
CONREVSMA012-R58
$3.68
$3.34
$3.01
CONREVSMA013.031 CONREVSMA013.062 Male PCB Edge-Mount (for board thicknesses of 0.031” and 0.062”)
Part #
<200
200-999
1,000-5,000
CONREVSMA013.031
$5.92
$5.38
$4.84
CONREVSMA013.062
$5.92
$5.38
$4.84
CONREVSMA014 Female Bulkhead Rear Mount Cable End Crimp with O-Ring (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONREVSMA014
$3.18
$2.89
$2.60
CONREVSMA014-R178
$3.18
$2.89
$2.60
CONREVSMA014-R58
$3.18
$2.89
$2.60
CONREVSMA015 Female Bulkhead Front Mount Cable End Crimp with O-Ring (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONREVSMA015
$3.71
$3.38
$3.04
CONREVSMA015-R178
N/A
N/A
$3.38
CONREVSMA015-R58
N/A
N/A
$3.38
Page 39
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
SMA CONNECTORS CONSMA005
CONSMA001
Female Bulkhead Rear Mount Cable End Crimp (for RG-174, 178, 58)
Female PCB Mount
Part # CONSMA001
<200 $2.90
200-999 $2.64
1,000-5,000 $2.38
CONSMA001-SMD Female Surface Mount
Part #
<200
200-999
1,000-5,000
CONSMA001-SMD
$3.53
$3.21
$2.89
Part #
<200
200-999
1,000-5,000
CONSMA005
$3.68
$3.34
$3.01
CONSMA005-R178
$3.68
$3.34
$3.01
CONSMA005-R58
$2.45
$2.23
$2.00
CONSMA006.031 CONSMA006.062 Female PCB Edge Multi-Mount (for board thicknesses of 0.031” and 0.062”)
CONSMA002 Female Right-Angle PCB Mount
Part #
<200
200-999
1,000-5,000
CONSMA002
$2.90
$2.64
$2.38
Part #
<200
200-999
1,000-5,000
CONSMA006.031
$4.08
$3.71
$3.34
CONSMA006.062
$4.08
$3.71
$3.34
CONSMA007 Male Cable End Crimp (for RG-174, 178, 58)
CONSMA002-SMD Female Right-Angle Surface Mount
Part #
<200
200-999
1,000-5,000
CONSMA002-SMD
$3.27
$2.97
$2.67
Part #
<200
200-999
1,000-5,000
CONSMA007
$1.82
$1.65
$1.49
CONSMA007-R178
$1.82
$1.65
$1.49
CONSMA007-R58
$1.82
$1.65
$1.49
CONSMA008 Extended Female PCB Mount
CONSMA002-L Female Right-Angle PCB Mount - Extended
Part #
<200
200-999
1,000-5,000
CONSMA002-L
$3.68
$3.34
$3.01
Part #
<200
200-999
1,000-5,000
CONSMA008
$2.97
$2.70
$2.43
CONSMA010 Right-Angle Male - Female Adapter
CONSMA003.031 CONSMA003.062
Part #
<200
200-999
1,000-5,000
Female PCB Edge-Mount
CONSMA010
$4.08
$3.71
$3.34
(for board thicknesses of 0.031” and 0.062”)
CONSMA011
Part #
<200
200-999
1,000-5,000
CONSMA003.031
$2.74
$2.49
$2.24
CONSMA003.062
$2.74
$2.49
$2.24
CONSMA003.031-L CONSMA003.062-L
Female Cable End Crimp (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONSMA011
$2.18
$1.98
$1.78
CONSMA011-R178
$2.18
$1.98
$1.78
CONSMA011-R58
$2.18
$1.98
$1.78
Female PCB Edge-Mount - Extended
CONSMA012
(for board thicknesses of 0.031” and 0.062”)
Part #
<200
200-999
1,000-5,000
CONSMA003.031-L
$4.54
$4.13
$3.71
CONSMA003.062-L
$4.54
$4.13
$3.71
Page 40
Right-Angle Male Cable End Crimp (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONSMA012
$2.64
$2.40
$2.16
CONSMA012-R178
$2.64
$2.40
$2.16
CONSMA012-R58
$2.64
$2.40
$2.16
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
SMA CONNECTORS CONSMA013.031 CONSMA013.062 Male PCB Edge-Mount (for board thicknesses of 0.031” and 0.062”)
Part #
<200
200-999
1,000-5,000
CONSMA013.031
$3.88
$3.53
$3.17
CONSMA013.062
$3.88
$3.53
$3.17
CONSMA014 Female Bulkhead Rear Mount Cable End Crimp with O-Ring (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONSMA014
$3.68
$3.34
$3.01
CONSMA014-R178
$3.68
$3.34
$3.01
CONSMA014-R58
$3.27
$2.97
$2.67
CONSMA015 Female Bulkhead Front Mount Cable End Crimp with O-Ring (for RG-174, 178, 58)
Part #
<200
200-999
1,000-5,000
CONSMA015
$4.27
$3.88
$3.49
CONSMA015-R178
N/A
N/A
$3.88
CONSMA015-R58
N/A
N/A
$3.88
Part #
<200
200-999
1,000-5,000
ADP-SMAF-SMAF
$3.71
$3.37
$3.03
Part #
<200
200-999
1,000-5,000
ADP-SMAM-SMAM
$3.99
$3.63
$3.27
ADP-SMAF-SMAF Female to Female Adaptor
ADP-SMAM-SMAM Male to Male Adaptor
Page 41
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
MCX CONNECTORS CONMCX005
CONMCX001
Female Bulkhead Rear Mount Cable End Crimp (for RG-174, 178)
Female PCB Mount
Part #
<200
200-999
1,000-5,000
CONMCX001
$2.38
$2.16
$1.94
CONMCX001-SMD
CONMCX001-SMD
<200 $2.67
200-999 $2.43
1,000-5,000 $2.19
$2.67
CONMCX005-R178
$3.27
$2.97
$2.67
Part #
<200
200-999
1,000-5,000
CONMCX007
$1.82
$1.65
$1.49
CONMCX007-R178
$1.82
$1.65
$1.49
Female Cable End Crimp (for RG-174, 178)
<200 $2.90
200-999 $2.64
1,000-5,000 $2.38
Part #
<200
200-999
1,000-5,000
CONMCX011
$2.54
$2.31
$2.08
CONMCX011-R178
$2.54
$2.31
$2.08
CONMCX012
CONMCX002-SMD
Right-Angle Male Cable End Crimp (for RG-174, 178)
Female Right-Angle Surface Mount
Part #
<200
200-999
1,000-5,000
CONMCX002-SMD
$3.27
$2.97
$2.67
CONMCX003.031 CONMCX003.062 Female PCB Edge-Mount (for board thicknesses of 0.031” and 0.062”)
Part #
<200
200-999
CONMCX003.031
$2.86
$2.60
$2.34
CONMCX003.062
$2.86
$2.60
$2.34
1,000-5,000
CONMCX003.031-L CONMCX003.062-L Female PCB Edge-Mount - Extended (for board thicknesses of 0.031” and 0.062”)
Part #
<200
200-999
1,000-5,000
CONMCX003.031-L
$3.63
$3.30
$2.97
CONMCX003.062-L
$3.63
$3.30
$2.97
CONMCX004 Female Rear Mount Bulkhead (Solder Pot)
Part #
<200
200-999
1,000-5,000
CONMCX004
$3.63
$3.30
$2.97
Page 42
1,000-5,000
$2.97
CONMCX011
Female Right-Angle PCB Mount
CONMCX002
200-999
$3.27
Male Cable End Crimp (for RG-174, 178)
CONMCX002 Part #
<200
CONMCX005
CONMCX007
Female Surface Mount
Part #
Part #
Part #
<200
200-999
1,000-5,000
CONMCX012
$2.74
$2.49
$2.24
CONMCX012-R178
$2.74
$2.49
$2.24
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
RP-MCX CONNECTORS CONREVMCX005
CONREVMCX001
Female Bulkhead Rear Mount Cable End Crimp (for RG-174, 178)
Female PCB Mount
Part # CONREVMCX001
<200 $2.04
200-999 $1.86
1,000-5,000 $1.67
CONREVMCX001-SMD
<200
200-999
1,000-5,000
CONREVMCX005
$2.26
$2.06
$1.85
CONREVMCX005-R178
$2.26
$2.06
$1.85
CONREVMCX007
Female Surface Mount
Male Cable End Crimp (for RG-174, 178)
Part #
<200
200-999
1,000-5,000
CONREVMCX001-SMD
$2.52
$2.29
$2.06
CONREVMCX002-L
Part #
<200
200-999
1,000-5,000
CONREVMCX007
$3.27
$2.97
$2.67
CONREVMCX007-R178
$3.27
$2.97
$2.67
CONREVMCX011
Female Right-Angle PCB Mount - Extended
Female Cable End Crimp (for RG-174, 178)
Part #
<200
200-999
1,000-5,000
CONREVMCX002-L
$3.18
$2.89
$2.60
CONREVMCX002-SMD
Part #
<200
200-999
1,000-5,000
CONREVMCX011
$2.45
$2.23
$2.00
CONREVMCX011-178
$2.45
$2.23
$2.00
CONREVMCX012
Female Right-Angle Surface Mount
Right-Angle Male Cable End Crimp (for RG-174, 178)
Part #
<200
200-999
1,000-5,000
CONREVMCX002-SMD
$3.09
$2.81
$2.53
CONREVMCX002-SMD-L Female Right-Angle Surface Mount - Extended
Part #
<200
200-999
1,000-5,000
CONREVMCX002-SMD-L
$3.18
$2.89
$2.60
CONREVMCX003.062 Female PCB Edge-Mount (for board thicknesses of 0.062”)
Part #
<200
200-999
1,000-5,000
CONREVMCX003.062
$2.26
$2.06
$1.85
CONREVMCX003.062-L Female PCB Edge-Mount - Extended (for board thicknesses of 0.062”)
Part #
<200
200-999
1,000-5,000
CONREVMCX003.062-L
$2.72
$2.48
$2.23
Page 43
Part #
Part #
<200
200-999
1,000-5,000
CONREVMCX012
$3.27
$2.97
$2.67
CONREVMCX012-R178
$3.27
$2.97
$2.67
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
MMCX CONNECTORS CONMMCX001 Female PCB Mount
Part #
<200
200-999
1,000-5,000
CONMMCX001
$2.38
$2.16
$1.94
CONMMCX001-SMD Female Surface Mount
Part #
<200
200-999
1,000-5,000
CONMMCX001-SMD
$2.67
$2.43
$2.19
CONMMCX002 Female Right-Angle PCB Mount
Part #
<200
200-999
1,000-5,000
CONMMCX002
$2.74
$2.49
$2.24
CONMMCX002-SMD Female Right-Angle Surface Mount
Part #
<200
200-999
1,000-5,000
CONMMCX002-SMD
$3.08
$2.80
$2.52
CONMMCX007 Male Cable End Crimp (for RG-174, 178)
Part #
<200
200-999
1,000-5,000
CONMMCX007
$2.01
$1.83
$1.65
CONMMCX007-R178
$2.01
$1.83
$1.65
CONMMCX011 Female Cable End Crimp (for RG-174, 178)
Part #
<200
200-999
1,000-5,000
CONMMCX011
$2.54
$2.31
$2.08
CONMMCX011-R178
$2.54
$2.31
$2.08
CONMMCX012 Right-Angle Male Cable End Crimp (for RG-174, 178)
Part #
<200
200-999
1,000-5,000
CONMMCX012
$2.90
$2.64
$2.38
CONMMCX012-R178
$2.90
$2.64
$2.38
Page 44
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
CABLE ASSEMBLIES CONREVSMA005C08.5 RP-SMA Female Bulkhead to Unterminated w/ 8.5” RG-174 Cable
Part #
<200
200-999
1,000-5,000
CONREVSMA005-C08.5
$5.36
$4.88
$4.39
CONREVSMA014C08.5 RP-SMA Female Bulkhead with O-ring to Unterminated w/ 8.5” RG-174 Cable
Part #
<200
200-999
1,000-5,000
CONREVSMA014-C08.5
$5.03
$4.58
$4.12
C58LL-RPSM-2438-NM RP-SMA Male to N Male w/ 8’ Low Loss RG-58 Cable Matched to Antenna Factor Yagi antennas
Part # C58LL-RPSM-2438-NM
<200
200-999
1,000-5,000
$12.62
$11.48
$10.33
C58LL-SMAM-2438-NM SMA Male to N Male w/ 8’ Low Loss RG-58 Cable Matched to Antenna Factor Yagi antennas
Part # C58LL-SMAM-2438-NM
<200
200-999
1,000-5,000
$12.17
$11.06
$9.96
CSA-SMAM-216-RSFB SMA Male to RP-SMA Female Bulkhead Mount w/ 216mm (8.5”) of RG-174 cable
Part #
<200
200-999
1,000-5,000
CSA-SMAM-216-RSFB
$7.92
$7.20
$6.48
CSA-RPSM-216-RSFB RP-SMA Male to RP-SMA Female Bulkhead Mount w/ 216mm (8.5”) of RG-174 cable
Part #
<200
200-999
1,000-5,000
CSA-RPSM-216-RSFB
$7.63
$6.94
$6.24
CSA-RPSM-216-SAFB RP-SMA Male to SMA Female Bulkhead Mount w/ 216mm (8.5”) of RG-174 cable
Part #
<200
200-999
1,000-5,000
CSA-RPSM-216-SAFB
$8.00
$7.28
$6.55
CSA-SMAM-216-SAFB SMA Male to SMA Female Bulkhead w/ 216mm (8.5”) of RG-174 cable
Part #
<200
200-999
1,000-5,000
CSA-SMAM-216-SAFB
$8.00
$7.28
$6.55
Page 45
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 490-4965 • FAX: (541) 471-6251 www.connectorcity.com
SPECIALTY PRODUCTS RP-SMA to SMA Adaptor The ADP-SMAM-RPSF converts an RP-SMA female connector to SMA male. This is suitable for interfacing Antenna Factor connectorized antennas or RP-SMA terminated cables to standard test equipment. The ADP-RPSM-SMAF converts an RP-SMA male connector to SMA female. This is suitable for connecting products using RP-SMA connectors for Antenna Factor antennas to standard test equipment. Quantity ADP-SMAM-RPSF ADP-RPSM-SMAF <200
$4.96
200-999
$4.51
$5.12 $4.66
1,000-4,999
$4.06
$4.19
5,000+
Call
Call
Battery Holder This battery holder accommodates 20mm coin cell batteries. This low-cost SMD holder provides a low profile while maintaining a secure hold on the battery. Ideal for keyfobs, remote controls, and other small handheld devices. Quantity
Price
<200
$0.22
200-999
$0.20
1,000-4,999
$0.17
5,000+
Call BAT-HLD-001
Part #
Crimp Kits These high-quality crimping sets are ideal for low-volume connector assembly. All kits include crimp frame, cable cutter, and stripper in a custom padded hard case. Model CTK-58-01 comes with a die insert for RG-58/59/62. Model CTK-174-02 comes with two (2) die inserts: one for RG-174/179, and one for RG-58/59/62.
Part #
Price
CTK-58-01
$119
CTK-174-02
$124
Custom Cable Assemblies Connector City can produce cable assemblies for volume OEM customers. Specify the terminations, cable length, and cable type and Connector City can deliver a high-quality assembly for a low cost. See our online assembly form at www.connectorcity.com.
Page 46
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
ADDITIONAL SERVICES Linx works to simplify any step in the RF implementation process that may cause a customer delay or frustration. While Linx does not participate in the actual design of a customer’s product or perform contract RF design services, Linx does offer a wide range of support services designed to assist a customer in achieving legality and to maximize the performance of our components. These services include:
FCC Pre-screen Services The most difficult obstacle to overcome when bringing an RF-based product to market, aside from the design itself, is the approval process. To ensure a customer the best opportunity to pass FCC testing, Linx offers unique low-cost pre-compliance testing services. With this service, a product is screened just as it will be during actual FCC testing. In addition to this screen, the actual design is evaluated by a Linx engineer to ensure that it is both legal and technically optimized. A pre-screen report is then generated summarizing our findings and recommendations. This report, along with additional documentation, will further ease your preparations for final approval testing.
Antenna Design Assistance Linx offers a wide variety of standard antenna styles that will meet the needs of most user’s applications. Occasionally, a design will call for a custom antenna to meet physical or cosmetic constraints. Since the design of application-specific antennas calls for experience and equipment outside the scope of many of our customers, Linx offers antenna design services. These services range from assistance in evaluation of a customer’s antenna configuration to actual antenna design. One of our most popular design specialties is small printed antennas, which are often incorporated directly on a PCB to reduce cost and eliminate a visible antenna.
Implementation Assistance Linx does not undertake OEM design projects in most instances; however, our engineers have broad experience in almost every area of design and manufacturing. Linx is pleased to offer our customers the benefit of that experience as it pertains to the integration of Linx RF products into a product design.
Education At Linx, we believe that our best customer is an informed customer. That is why our comprehensive manuals are supported by an online knowledge base and a growing library of informative application notes. Backed by the assistance of experienced support personnel, each customer has an opportunity to learn about our products and the basic principles of RF.
Internet Site If you have questions regarding any Linx product and have internet access, make www.linxtechnologies.com your first stop. Our website is organized in an intuitive format to give you the answers you need. Day or night, the Linx website gives you instant access to the latest information regarding the products and services of Linx. It’s all here: manual and software updates, knowledge base, application notes, FCC information, and much more.
Page 47
159 ORT LANE • MERLIN, OR 97532 PHONE: (800) 736-6677 • FAX: (541) 471-6251 WIRELESS MADE SIMPLE ®
www.linxtechnologies.com
TERMS AND CONDITIONS OF SALE 1. PAYMENT TERMS
11. CUSTOMER’S REMEDIES
Customer shall pay Linx in advance for all evaluation kits and orders for less than 1,000 pieces of Product. Customer shall pay all other orders for Product without setoff or deduction upon receipt of Linx’s invoice, unless prior credit approval has been granted by Linx. Linx may extend NET 30 terms on approved accounts. Please complete Linx’s credit application for consideration of NET 30 terms. All prices quoted or charged by Linx shall be F.O.B. Linx’s plant. Prices do not include sales, excise, use, or other taxes measured by the sales price of Product sold. Customer shall pay any and all such taxes. Interest shall accrue on all past due amounts at the rate of 1.5% per month or the maximum allowed by law, whichever is less.
In the event warranty service is required, an RMA# must be obtained from Linx prior to return. Linx will carefully assess Customer’s returned Product. If it is found to qualify for warranty status, Linx will, at its election, repair or replace the Product without charge (excluding inbound shipping), or refund the original purchase price paid.
2. QUANTITY DISCOUNTS Linx may, in its discretion, extend quantity pricing discounts to Customers with accounts in good standing based on the amount of Product purchased in a six-month period with up to four Product release dates. In the event of rescheduling or partial cancellations, Linx will retroactively invoice Customer to reflect the discount attributable for the actual amount of Product accepted.
3. EVALUATION KIT PURCHASE REQUIREMENT
12. LIMITATIONS ON CUSTOMER’S REMEDIES IN NO EVENT SHALL LINX BE LIABLE FOR ANY OF CUSTOMER’S INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR LOST REVENUES, ARISING IN ANY WAY FROM ANY DEFECTIVE OR NON-CONFORMING PRODUCTS OR FOR ANY OTHER BREACH OF CONTRACT BY LINX. The limitations on Linx’s liability is applicable to any and all claims or theories of recovery asserted by Customer, including, without limitation, breach of contract, breach of warranty, strict liability, or negligence. Customer assumes all liability (including, without limitation, liability for injury to person or property, economic loss, or business interruption) for all claims, including claims from third parties, arising from the use of the Products.
Linx requires the Customer to purchase an evaluation kit prior to the sale of individual 13. LIMITATIONS ON TIME TO BRING ACTION modules of Product. This policy ensures that each Customer has the tools necessary Any action by Customer against Linx must be commenced by Customer within one to fairly evaluate our Products and legally use them for Customer’s application. year after the cause of action has accrued.
4. CANCELLATIONS
14. LINX’S REMEDIES
Customer may cancel an order for standard Product at any time prior to shipment by Linx. If the cancellation affects a quantity discount extended for a blanket order, Customer will be billed retroactively for the difference between the quantity of Product ordered and quantity accepted. Cancellation of an order for custom Product at any time or standard Product after shipment is not permitted.
Upon default by Customer, Linx shall have all the remedies afforded a seller of goods at law or in equity, including, without limitation, the right to (a) immediately accelerate all amounts due from Customer, (b) suspend shipment of all Products ordered, and (c) cancel all orders for Products.
5. CHANGES
15. INDEMNITY
Customer will indemnify, defend, protect, and hold harmless Linx from and against Linx realizes Customer’s needs change rapidly and will attempt to accommodate all claims, damages, actions, suits, proceedings, demands, assessments, adjustments, requested changes to Customer’s orders. Additional charges for requested changes costs, and expenses incurred by Linx as a result of or arising from any Products may apply. sold by Linx to Customer.
6. DELIVERY
16. FCC CERTIFICATION
Linx will deliver the Products by placing them with a carrier for delivery to Customer. Delivery dates are estimated only. In no event shall Linx be liable to Customer or any third parties for any damages of any kind, direct or indirect, in the event of delay of delivery.
Linx designs its Products taking into account compliance with FCC Part 15. HOWEVER, IT IS THE SOLE RESPONSIBILITY OF CUSTOMER TO VERIFY THE APPROPRIATENESS OF THE PRODUCTS FOR EACH INDIVIDUAL APPLICATION AND OBTAIN CERTIFICATION OF THE CUSTOMER’S COMPLETED GOODS INTO WHICH THE PRODUCTS ARE INCORPORATED.
7. INSPECTION AND ACCEPTANCE Customer shall promptly inspect and test all Products upon receipt. Customer shall be deemed to have accepted all Products unless Customer gives written notice of defective or non-conforming Products within 15 days after receipt. Customer’s notice shall describe the defect or non-conformity of the Products. Repair or replacement of any Products Linx determines to be defective or non-conforming shall be in accordance with Linx’s Limited Warranty and Exclusions and Customer’s Remedies as provided for below.
8. RETURNS
17. PROPRIETARY INFORMATION Linx’s Products may contain proprietary, patented, or copyrighted techniques, components, or materials. Under no circumstances shall any Customer have any right, title, or interest in any of Linx’s proprietary information.
18. DELAYS AND FORCE MAJEURE Linx shall not be in default for any delay in performance or delivery caused by circumstances beyond its reasonable control, including, but not limited to, an act of God, fires, floods, wars, terror, government actions, accidents, labor troubles, labor shortages, unavailability of materials, unavailability of equipment, or unavailability of transportation (“Force Majeure Event”). Linx may, without liability to Customer, suspend or cancel its performance upon the occurrence of any Force Majeure Event without liability to Customer.
All Product returned to Linx must be accompanied by a valid Return Merchandise Authorization Number ("RMA#"), which may be obtained by calling our Customer Service Department at (541) 471-6256. Products not bearing an RMA# will be returned at Customer’s expense. Customer may return for refund or credit new, unused, nondefective, or conforming Products that were shipped within the prior 120 days subject 19. COMPLETE AGREEMENT to (a) a 15% restocking charge, or (b) no restocking charge when the return is accompanied by a new order for Product that is at least twice the invoice amount These Terms and Conditions may be changed only by a written document executed by Linx and Customer. Any order, acknowledgment, or other form of acceptance (freight, insurance, and taxes excluded) of the returned Product. issued by Customer that modifies, conflicts with, or contradicts any provision of 9. LIMITED WARRANTY AND EXCLUSIONS these Terms and Conditions is objected to and rejected by Linx. Linx warrants that its Products will conform to Linx’s current published specifications 20. CHOICE OF LAW and be free of defects in materials and workmanship for 90 days from the date of purchase when used in accordance with the guidelines and parameters specified by The parties’ agreement shall be governed by the laws of the State of Oregon. For Linx’s documentation. Linx does not warrant against defects arising from improper international sales, the laws of the State of Oregon, and not the United Nations design, application, or assembly practices, rework damage, exposure to moisture, Convention on Contracts for the International Sales of Goods, shall apply. impacts, excessive heat or cold, ESD, or overvoltage, or any other condition resulting 21. ARBITRATION AND ATTORNEY FEES from other than ordinary and appropriate usage. Any and all claims arising under these Terms and Conditions, or arising in any way Linx does not warrant the suitability of its Products for any specific application by from the sale or use of the Products, or otherwise, shall be resolved by binding, Customer. NONE OF LINX’S PRODUCTS IS INTENDED FOR USE IN APPLICATIONS mandatory arbitration under the authority of the Arbitration Service of Portland before IN WHICH THE SAFETY OF LIFE OR PROPERTY IS AT RISK. Linx does not warrant a panel of three arbitrators. The arbitration shall be conducted in Portland, OR. The any of its Products used in any application in which life or property is at risk. prevailing party in the arbitration shall be entitled to an award of attorney fees and 10. DISCLAIMER OF OTHER WARRANTIES all other costs of arbitration against the non-prevailing party. LINX DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Page 48
