Transcript
PrimaLuna DiaLogue Specs Info PrimaLuna Tube Equipment Model DiaLogue One Specs PrimaLuna Tube Equipment Model DiaLogue Two Specs PrimaLuna Tube Equipment Model DiaLogue Four Specs PrimaLuna Tube Equipment Model DiaLogue Five Specs PrimaLuna Tube Equipment Model DiaLogue Six Specs PrimaLuna Tube Equipment Model DiaLogue Seven Specs PrimaLuna Tube Equipment Model PhonoLogue Specs PrimaLuna Tube Equipment Accessories Specs Update: September 15, 2008
PrimaLuna DiaLogue Specs Info DiaLogue One, 36W integrated amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x EL-34 Inputs: 5 x line; 1 x home theatre input Outputs: 1 x tape; 4 and 8 Ohm PrimaLuna Adaptive Auto Bias Board, with integrated plate fuse for hassle free protection. Low feedback (6dB), low noise wide bandwidth design for maximum detail retrieval, micro contrasts and excellent impulse behaviour and drive power. PrimaLuna designed and matched wideband low loss DiaLogue output transformers with optimized phase characteristics. Prepared for receiving PrimaLuna ProLogue/DiaLogue MM-Phono Preamp board. Amplifier can be used in Ultralinear or Triode mode and is supplied with full function heavy metal remote control.
Specifications: Power: 36 Watts per channel Ultralinear / 18W Triode Frequency response: 10Hz – 30kHz +/- 1.0dB THD with AABB installed: <0,3% at 1W; less than 1,2% at rated power S/N ratio: 89dB (unweighted) Input Impedance: 100kOhm Input sensitivity: 240mV (for rated power at maximum volume setting) Maximum gain: 36,5dB Output impedance choice: 4 and 8 Ohm Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 248W Net Weight: 63.8 lbs / 29 kg Shipping Weight: 70.5 lbs / 32 kg Dimensions: 15.9” x 15.2” x 8.3” / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions: 22.7” x 18.4” x 12” / 577 mm x 468 mm x 305 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board + Remote
Euro 2000,- including tax
PrimaLuna DiaLogue Specs Info DiaLogue Two, 38W integrated amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x KT-88 Inputs: 5 x line; 1 x home theatre input Outputs: 1 x tape; 4 and 8 Ohm PrimaLuna Adaptive Auto Bias Board, with integrated plate fuse for hassle free protection. Super fast super low noise rectifier circuitry. Highest quality capacitors in signal path and power supply bypass (where it matters most). Low feedback (6dB), low noise wide bandwidth design for maximum detail retrieval, micro contrasts and excellent impulse behaviour and drive power. PrimaLuna designed and matched wideband low loss DiaLogue output transformers with optimized phase characteristics. Prepared for receiving PrimaLuna ProLogue/DiaLogue MM-Phono Preamp board. Amplifier can be used in Ultralinear or Triode mode and is supplied with full function heavy metal remote control.
Specifications: Power: 38 Watts per channel Ultralinear / 21W Triode Frequency response: 10Hz – 30kHz +/- 1.0dB THD with AABB installed: <0,22% at 1W; less than 1,2% at rated power S/N ratio: 89dB (unweighted) Input Impedance: 100kOhm Input sensitivity: 270mV (for rated power at maximum volume setting) Maximum gain: 36,5dB Output impedance choice: 4 and 8 Ohm Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 250W Net Weight: 63.8 lbs / 29 kg Shipping Weight: 70.5 lbs / 32 kg Dimensions: 15.9” x 15.2” x 8.3” / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions: 22.7” x 18.4” x 12” / 577 mm x 468 mm x 305 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board + Remote
Euro 2300,- including tax
PrimaLuna DiaLogue Specs Info DiaLogue Four, 42W stereo power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x EL-34 Input: RCA single-ended Outputs: 4 and 8 Ohm New global feedbackless design being an evolution of DiaLogue One with novel phase splitter and driver stage implementation. PrimaLuna Adaptive Auto Bias Board with integrated plate fuse for hassle free protection. Low noise, high current driverstage for higher power bandwidth, very low phase distortion and superior impulse behaviour. PrimaLuna designed wideband and matched low loss DiaLogue output transformers with optimized phase characteristics. Amplifier can be used in Ultralinear or Triode mode and is supplied with full UL/TR function heavy metal remote control.
Specifications: Power: 42 Watts per channel Ultralinear / 21W Triode Frequency response: 10Hz – 100kHz +/–3dB THD with AABB installed: <0,25% at 1W; 2% at rated power S/N ratio: 89dB unweighted Input Impedance: 100 kOhm Input sensivity: 880mV rms input for rated output power Maximum gain: 26dB (8 Ohm), 23dB (4 Ohm) Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 235W Net Weight: 63.8 lbs / 29 kg Shipping Weight: 70.5 lbs / 32 kg Dimensions: 15.9” x 15.2” x 8.3” / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions: 22.7” x 18.4” x 12” / 577 mm x 468 mm x 305 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board + Remote
Euro 1750,- including tax
PrimaLuna DiaLogue Specs Info DiaLogue Five, 42W stereo power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x KT-88 Input: RCA single-ended Outputs: 4 and 8 Ohm New global feedbackless design being an evolution of DiaLogue Two with novel phase splitter and driver stage implementation. PrimaLuna Adaptive Auto Bias Board with integrated plate fuse for hassle free protection. Low noise, high current driverstage for higher power bandwidth, very low phase distortion and superior impulse behaviour. Superfast super low noise rectifier circuitry. Highest quality capacitors in signal path and power supply bypass for maximum detail retrieval and dynamic microcontrasts. PrimaLuna designed and matched wideband low loss output DiaLogue transformers with optimized phase characteristics. Amplifier can be used in Ultralinear or Triode mode and is supplied with UL/TR function heavy metal remote control.
Specifications: Power: 42 Watts per channel Ultralinear / 21W Triode Frequency response: 10Hz – 100kHz +/–3dB THD with AABB installed: <0,25% at 1W; 2% at rated power S/N ratio: 89dB unweighted Input Impedance: 100 kOhm Input sensivity: 880mV rms input for rated output power Maximum gain: 26dB (8 Ohm), 23dB (4 Ohm) Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 235W Net Weight: 63.8 lbs / 29 kg Shipping Weight: 70.5 lbs / 32 kg Dimensions: 15.9” x 15.2” x 8.3” / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions: 22.7” x 18.4” x 12” / 577 mm x 468 mm x 305 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board + Remote
Euro 2125,- including tax
PrimaLuna DiaLogue Specs Info DiaLogue Six, 70W mono power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x EL-34 Input: RCA single-ended Outputs: 2, 4 and 8 Ohm The DiaLogue Six shares much of its basic circuitry with the DiaLogue Four stereo power amp. The novel phase splitter and driver stage implementation have been adapted for monaural functionality in linearity, distortion, and power delivery. We accomplish this by using an industry unique dual feedback topology: Cross coupled current feedback for superior impulse behaviour and gain stability at any level. We use very small amounts of negative feedback for a more precise gain setting, lower distortion, and lower output impedance. This feedback technology effectively cancels the byproducts of negative feedback, thus creating an amplifier circuit that gives you all the benefits of properly implemented feedback, but without the drawbacks. Newly designed PrimaLuna wide band low loss DiaLogue output transformers designed to handle more difficult speaker loads. A 2 Ohm tap is included in addition to the 4 Ohm & 8 Ohm taps. As with all PrimaLuna amplifiers, the DiaLogue Six comes standard with Adaptive Auto Bias, fuse protection, and soft start circuitry for extended tube life. Amplifier can be used in Ultralinear or Triode mode and is supplied with UL/TR function heavy metal remote control (one remote per pair of mono amps).
Specifications: Power: 70 Watts per channel Ultralinear / 40W Triode Frequency response: 10Hz – 100kHz +/–3dB THD with AABB installed: <0,25% at 1W; 2% at rated power S/N ratio: 83dB unweighted Input Impedance: 100 kOhm Input sensivity: 1,1V for rated power Maximum gain: 26,5dB (8 Ohm), 24,5dB (4 Ohm) Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 232W Net Weight: 63.8 lbs / 29 kg Shipping Weight: 70.5 lbs / 32 kg Dimensions: 15.9” x 15.2” x 8.3” / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions: 22.7” x 18.4” x 12” / 577 mm x 468 mm x 305 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board + Remote
Euro 1575,- including tax
PrimaLuna DiaLogue Specs Info DiaLogue Seven, 70W mono power amplifier Tubes: 2 x 12AX7, 2 x 12AU7 and 4 x KT-88 Input: RCA single-ended Outputs: 2, 4 and 8 Ohm The DiaLogue Seven shares much of its basic circuitry with the DiaLogue Five stereo power amp. The novel phase splitter and driver stage implementation have been adapted for monaural functionality in linearity, distortion, and power delivery. We accomplish this by using an industry unique dual feedback topology: Cross coupled current feedback for superior impulse behaviour and gain stability at any level. We use very small amounts of negative feedback for a more precise gain setting, lower distortion, and lower output impedance. This feedback technology effectively cancels the byproducts of negative feedback, thus creating an amplifier circuit that gives you all the benefits of properly implemented feedback, but without the drawbacks. Newly designed PrimaLuna wide band low loss DiaLogue output transformers designed to handle more difficult speaker loads. A 2 Ohm tap is included in addition to the 4 Ohm & 8 Ohm taps. As with all PrimaLuna amplifiers, the DiaLogue Seven comes standard with Adaptive Auto Bias, fuse protection, and soft start circuitry for extended tube life. As with the DiaLogue Five, the DiaLogue Seven also includes upgraded Solen capacitors, and fast recovery diodes in the power supply for the ultimate in detail and dynamics. Amplifier can be used in Ultralinear or Triode mode and is supplied with UL/TR function heavy metal remote control (one remote per pair of mono amps).
Specifications: Power: 70 Watts per channel Ultralinear / 40W Triode Frequency response: 10Hz – 100kHz +/–3dB THD with AABB installed: <0,25% at 1W; 2% at rated power S/N ratio: 84dB unweighted Input Impedance: 100 kOhm Input sensivity: 880mV rms input for rated output power Maximum gain: 26x dB (8 Ohm), 23dB (4 Ohm) Power requirement: 115/230V +/-5%, 50/60Hz Power consumption: 232W Net Weight: 63.8 lbs / 29 kg Shipping Weight: 70.5 lbs / 32 kg Dimensions: 15.9” x 15.2” x 8.3” / 405 mm x 385 mm x 210 mm (L x W x H) Shipping Dimensions: 22.7” x 18.4” x 12” / 577 mm x 468 mm x 305 mm (L x W x H) Retail inclusive Adaptive Auto Bias Board + Remote
Euro 1875,- including tax
PrimaLuna DiaLogue Specs Info PhonoLogue Phono, MM phono preamplifier with RIAA correction Tubes: none MM phono preamplifier with RIAA correction for mounting in ProLogue/DiaLogue One/Two and ProLogue Three models. The boards are the same, but additional parts for connection differ slightly. Requires no extra plugs or connectors, fits on existing RCA's of any input. Superior sound quality on a tiny footprint. Fully Surface Mount Technology implementation for shortest signal paths as well as minimum parasitic capacitances and inductances. Excellent parts throughout, selected on sound quality as first priority: miniature film capacitors, minimelf resistors, superior opamp for highest accuracy, lowest noise, highest speed and most robust drive capabilities into the RIAA correction stage, resulting in a very detailed, open and lifelike sound from any LP record. Low impedance electrolytics, super lownoise powersupply. Dimensions: small as a big stamp!
Specifications: Input Impedance: 50kOhm Gain: 42dB (127x) Frequency Response: 10Hz - 50kHz RIAA accuracy: <0,5dB 20Hz - 20kHz Overload Margin: >20dB rel 5mV Harmonic Distortion & noise: -83dB Size: 3,2 x 3,8 cm (1.26” x 1.5”) Retail
Euro 150,- including tax
PrimaLuna DiaLogue Specs Info Accessories Retail G/S front for DL One, Two incl. 2 knobs
Euro 150,- including tax
Retail G/S front for DL Four, Five, Six, Seven
Euro 100,- including tax
Retail of following accessories available from local distributor:
PrimaLuna branded EL-34CH tube PrimaLuna branded KT-88CH tube PrimaLuna branded 12AU7CH tube PrimaLuna branded 12AX7CH tubes PrimaLuna branded 5AR4CH tubes DiaLogue One Tube Set Complete DiaLogue Two Tube Set Complete DiaLogue Three Tube Set Complete DiaLogue Four Tube Set Complete DiaLogue Five Tube Set Complete DiaLogue Six Tube Set Complete (per pair) DiaLogue Seven Tube Set Complete (per pair) PrimaLuna White Gloves per pair
