Transcript
Data sheet • Hardware Product • Server
PRIMERGY Rack Console RC21 19 Inch Rack Console with TFT Monitor §
Integral rack console for one or more servers § Ergonomic administrator workstation § Only occupies two height units For medium-sized to large installations, 19 Inch rack systems have proven to be an extremely reliable and manageable solution for housing servers and their expansion units. This is why, in practice, users constantly desire to install additional components in the existing rack. Eventually the first rack becomes full and an additional rack is required, which means the necessary space must also be available. Before this second rack is purchased, it can be more economical to look for ways of saving on height units with the installed components, or better still, to plan ahead for possible future expansion at the time the original rack is installed. For example, the 15 Inch monitor required for server administration occupies 8 valuable height units and the keyboard takes up another one. These height units would be much more effectively used to house an additional computer, a storage subsystem unit, or the longoverdue UPS. In many cases, the monitor is installed right at the top of the rack, which is not particularly user-friendly. Putting it anywhere else in the rack, on the other hand, would take up an extra height unit. With its 19 Inch Rack Console Fujitsu Siemens allows these height units to be used more effectively and at the same provides the basis for a much more ergonomic administration workstation. The Rack Console is designed as a slide-in module, occupies two height units, comprises keyboard and TFT monitor, and can optionally incorporate console switch functionality. If the height unit for the conventional keyboard slide-in module is included, a total of seven fewer height units are needed.
www.fujitsu-siemens.com
Design The Rack Console combines keyboard and monitor into a single functional unit. This combination is possible because of the low height of a TFT display. The monitor can be tilted to adjust the viewing angle and is positioned behind the keyboard with touch pad. When not in use, it folds away out of sight into the slide-in module. When inserted in the rack, it only occupies two height units. When retracted, the slide-in module is protected against unintentional movement by a locking mechanism. Ergonomics The TFT monitor not only contributes its recognised ergonomic advantages but also allows the entire console module to be adjusted to the optimum height. The operator has the keyboard and the monitor in front of him almost as if he were at a desktop. The monitor can be tilted to the optimum viewing angle. Enhanced functionality Many server installations consist of several individual computers (clusters, dedicated servers), and it is important that these can be administered from a central console position. This is where the optional console switch can prove invaluable, since it enables the keyboard with mouse and monitor to be switched between the individual computers. The switchover is effected from the Rack Console keyboard via hotkey. Using OSD (On Screen Display) , the relevant operator prompt is shown in a temporary pop-up window on the TFT monitor. The small drawer beneath the key-board is very practical. It can be used to store system-related documentation and frequently needed soft-ware tools.
Further features and technical data PRIMERGY RC21
15 Inch LCD TFT Display
PRIMERGY RC21
Visible screen diagonal 38 cm Graphics display (dependent on graphics processor) Pixels 1024 x 768 Pixels 800 x 600 (expanded) Pixels 640 x 480 (expanded) Text display (dependent on graphics processor) Pixels 720 x 400 Picture size 304 x 228 mm Frequencies horizontal ; vertical 30 - 61 kHz ; 55 - 75 Hz 2 Brightness typical/min. 210 cd/m Contrast typical/min. 300:1 Viewing angle typical/min. Horizontal ; vertical 120° ; 100° Plug and Play VESA DDC1/2B
19 Inch slide-in module Occupies two height units Housing for keyboard and TFT monitor. Drawer beneath keyboard. Locked in position when retracted. Power supply for TFT monitor
Setting options Brightness Contrast Black level, Auto level Picture position (horizontal and vertical) Color temperature and individual color setting Info (resolution and frequency) OSD Rotation (Pivot) Menu language, position Key lock Auto-adjust (direct access key)
Compliance with Norm and Standards Product safety Global Europe USA / Canada
IEC60950 EN60950 Ergonomic, (EN) ISO13406-2 UL1950 CSA 22.2 No.950
Electro magnetic compatibility Europe
EN55022 class B EN55024 61000-3-2 61000-3-3
Taiwan Japan Australian / New Zealand USA / Canada
Conformity process Electrical values Rated voltage 110-240 V Frequency 50-60 Hz Power draw max. 30 W Standby mode <3W Suspend mode <3W Off mode <3W Protection class 1 Temperatures/dimensions/weight Ambient temperature Recommended range 15°C to 35°C Limit 0°C to 40°C Dimensions (H x W x D) 385 x 390 x 215 mm (Landscape, lowest position) Weight ca. 5.2 kg Reliability MTBF (demonstrated) 70.000 h Lifetime of LCD 50.000 h (brightness > 50 % of original brightness)
Europe (CE)
EU Directive: 89/336/EEC 73/23 EWG
North America
Approvals Product safety Global Europe TCO ‘99 Germany GS mark USA / Canada There is general compliance with the safety requirements of all European countries and North America. National approvals required in order to satisfy statutory regulations or for other reasons (e.g. for Canada and USA, East European countries, Norway), can be applied for on request.
Electro magnetic compatibility Australian Taiwan Japan
Keyboard 86 Keys, international / German Touch-Pad integrated
Published by Fujitsu Siemens Computers Product Marketing PRIMERGY Enterprise Products, PRIMERGY Servers World Wide Web: http://www.primergy.com http://extranet.fujitsu-siemens.com/primergy
All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability; right of technical modifications reserved. All hardware and software names used are trade names or trademarks of their respective manufacturers. Copyright Page 2 of 2 Fujitsu Siemens Computers GmbH, V1.1 / February 2002
Company stamp
