Transcript
Runway and Taxiway Inset Lights ™
PRO III RCLI/TDZI 12˝ Runway Centerline Light or Touchdown Zone Light or Rapid Exit Taxiway Indicator Light Compliances: ICAO Annex 14: Fig. 2.5, Fig. 2.6 and 2.7
Applications The RCLI/TDZI light is a multi-use fixture for use as a runway centerline, touchdown zone and rapid exit taxiway light. The RCLI is a unidirectional and bidirectional light; typically clear/clear or clear/red, with two 48W lamps. When used as a rapid exit taxiway light it uses one 48W lamp in a yellow/blank configuration. The TDZI is a clear unidirectional light, with one 48W lamp. The RCLI/ TDZI may be used on any ICAO airfield.
Features Low Profile, < .25˝ (6mm) – FAA Style 3 High-strength aluminum optical assembly Low Power Consumption Few Parts to Stock Beam Orientation can be easily changed to left or right toe-in Easy to maintain – no sealant required for prism or feed-through assembly replacement Pressure test plug for seal integrity verification Long Lamp Life – Quartz Halogen, 48 W
Ordering Information 8 5 0
3 I –
–
–
Fixture Type: A = Runway centerline light or Rapid Exit Taxiway Light* B = Touchdown zone light Color Filters: CC = Clear/Clear (Fig. 2.7) CR = Clear/Red (Fig. 2.7) RX = Red/Blank (Fig. 2.7) C = Clear (Fig. 2.5) CX = Clear/Blank (Fig. 2.7) YX = Yellow/Blank (Fig. 2.7)* L-823 Plug Connection: P1 = One plug P2 = Two plugs (Fig. 2.7. Two color units only. Note: For this feature only, blank is not considered a color.) Beam Orientation (Fig. 2.5 only): L = Left Toe-in R = Right Toe-in S = Straight *Note: Rapid Exit Taxiway Light is YX configuration only.
1.8
www.chalp.com
Outline Drawings
11.94 (303) DIA
Dimensions:
inches (mm)
Instruction Manual: Shipping Weight:
2404
Shipping Volume:
0.7 cu ft 0.02 m3
0.25 (6)
OPTICAL HOUSING
LENS
0.75 (19)
16.0 lbs 7.3 kg
2.56 (65)
INNER COVER GASKET
LAMP BRACKET ASSEMBLY INNER COVER
Typical Photometric Data 5,000 CD AVERAGE REQUIRED (ACTUAL AVERAGE–6,872 CD SHOWN) 2,500 CD MINIMUM REQUIRED
15
250 CD 500 CD
15
12 9
2500 CD 500 CD MINIMUM REQUIRED
6
3
2500 CD
-8
-4 0 4 HORIZONTAL ANGLE
5000 CD
9 500 CD MINIMUM REQUIRED
6
250 CD MINIMUM REQUIRED
3
250 CD MINIMUM REQUIRED
0
0
8
-10
CD = CANDELA
Fig. 2.7 – Runway Centerline Light, Clear
12
75.0 CD
15
375 CD
12
750 CD
9 6
200 CD MINIMUM REQUIRED 100 CD MINIMUM REQUIRED
3
0
-8
-4 0 4 HORIZONTAL ANGLE
8
0 5 -5 HORIZONTAL ANGLE
10 CD = CANDELA
Fig. 2.5 – Touchdown Zone Light
VERTICAL ANGLE
750 CD AVERAGE REQUIRED (ACTUAL AVERAGE–1,211 CD SHOWN) 350 CD MINIMUM REQUIRED
15
VERTICAL ANGLE
250 CD 500 CD
12 5000 CD
VERTICAL ANGLE
VERTICAL ANGLE
5,000 CD AVERAGE REQUIRED (ACTUAL AVERAGE–7,672 CD SHOWN) 2,500 CD MINIMUM REQUIRED
200 CD 1000 CD
4000 CD
9 6
200 CD MINIMUM REQUIRED
3
0
CD = CANDELA
Fig. 2.7 – Runway Centerline Light, Red
2,000 CD AVERAGE REQUIRED (ACTUAL AVERAGE–4,217 CD SHOWN) 1,000 CD MINIMUM REQUIRED
-8
-4 0 4 HORIZONTAL ANGLE
8
100 CD MINIMUM REQUIRED CD = CANDELA
Fig. 2.7 – Rapid Exit Taxiway Indicator Light, Yellow
Accessories Catalog Number
Item Description
Catalog Number
Item Description
AC24242H200303 33001 33004 33005
Base: L-868B, Class I, 24˝ Deep Isolation Transformer – 45 W, 6.6/6.6 A Isolation Transformer – 100 W, 6.6/6.6 A Isolation Transformer – 100 W, 20/6.6 A
823KP-D4-D4 10047-2154 10047-1425
Connector Kit – L-823, 8 AWG, .32˝ to .43˝ O.D. Heat Shrink Kit – 1 Piece Heat Shrink Kit – 2 Piece
Part Number
Description
Part Number
Description
21116 21126-C 21126-R 21140
Lamp – 48 W, 6.6 A Lens Replacement Kit – Clear Lens Replacement Kit – Red Gasket – Bottom Cover
21121 21122 10048-25
Feed-through Assembly – 2 Lamp, 1 Connector Feed-through Assembly – 1 Lamp, 1 Connector Gasket Lubricant – 5.3 oz Container
Renewal Parts
Note: 1. Lens Replacement Kit includes lens, lens boot, lens retaining gasket, gasket lubricant, and lens retaining bracket and screws. Home Office: United States – 860-683-4300 International Offices: Canada • China • Dubai • Mexico Revised - 8/10
1.9
