Transcript
DRL3000 SERIES PRO SERIES DIRECT VENT GAS FIREPLACES
Our name is our promise.
CONTEMPORARY The DRL3000 direct vent gas fireplace is a contemporary linear design for a sleek and dramatic appearance. The expansive ceramic glass opening provides an exceptional view of the gentle, calming flames in black reflective porcelain interior. As versatile as it is efficient, the DRL3000 is the choice for affordable comfort in any modern living area. 2
FEATURED DRL3054 shown with Black Reflective Porcelain liner with clean-faced trim kit
EXCLUSIVE FEATURES Available in 42” and 54” linear configured models
Gas controls are conveniently hidden in the fireplace floor
Electronic ignition with battery backup to operate in the event of a power outage (unit installed IPI/CPI switch standard)
Exclusive Infini-Flame™ technology provides a continuous band of gentle flames across the expansive viewing area
71.9% industry leading AFUE
Clean-face design features ceramic glass for optimum heat transfer and 2015 ANSI barrier compliant
Optional blower to fine tune your heating needs
Interior finish selections consist of three-piece reflective porcelain panels and reflective black crushed glass media
Includes clean-faced trim kit or purchase an optional four-piece surround kit in black painted or brushed stainless steel finish
On/Off remote control
20 year limited warranty
FEATURED DRL3042 with its impressive flame display.
GLASS MEDIA OPTIONS (Required) Choose from four glass media options to complement your decor (Reflective Black media comes standard).
Reflective Black (standard)
Reflective Blue
Copper
Goldfinger
SURROUND OPTIONS (Optional) Choose from Black or Brushed Stainless Steel finishes.
Black (painted)
Brushed Stainless Steel
Platinum
FLAT WALL FRAMING SPECIFICATIONS
CE
ILI
NG
APPLIANCE SPECIFICATIONS Uses IHP Secure Vent 4.5 components (4.5”ID/7.5”OD)
10-1/2 (267)
11 7/8 (302)
7
(178)
5-1/8 (130)
DRL3000: 26-7/8 (683)
12-1/8 (308)
DRL3000 54: 32-7/8 (823)
G
e 65
J
(1651)
d
TOP VIEW
c
f
b
K
~
11 7/8 (302)
9-7/8 (251)
a
SIRIUS 42: 26-7/8 (683)
Rhap 42: 26-7/8
Rhap 54: 32-7/8
9 7/8 (251)
Inches
(683)54: 32-7/8 (823) SIRIUS (823)
(millimeters)
A
1/2 of A inches
RIGHT SIDE VIEW
(millimeters)
9-3/8
20 1/2 C I (521)
(238.1)
Note: Illustration provided for dimension information only. Fireplace mustVIEW be adequately framed and supported. FRONT (with Spacers installed) DRL3042 DRL3054 A = Required frame opening width. (1/2 of A = horizontal centerline of fireplace and vent framing opening.) A frame opening 54” depth with 1/2" (13mm) 66”thick wall finish material. For other wall finish thicknesses, B = Required adjust depth and nailing flanges accordingly (see “Unit Nailing Flanges” section). B frame opening 20-1/2” 20-1/2” C = Min. frame opening height (from base of appliance to header). C 37" 41-3/4" D = Min. height from appliance base to vertical centerline of horizontal termination vent pipe (with 6" straight vent D and 90° elbow 44-3/8” 48-1/4” section off appliance vent collar). (Note: Vertical centerline of horizontal termination vent pipe is NOT vertical centerline of vent frame opening. ecause firestop/spacer offset. E from E the same asMinimum height appliance base front toofceiling See “Exterior Wall Opening section.) 11 Framing” 7/8 Mounting (302) E = Min.Fheight from appliance baseplatform (front) torequired ceiling. F = Mounting platform (Note: Mount appliance on fully supported platform extending full width and depth of unit.) Rhap 42: 26-7/8 (683)
Rhap 54: 32-7/8 (823)
B
H
9 7/8 (251)
9-7/8
Gas line inlet
(251)
D
Approved for use with European Copper and Chimney Classics chimney tops, which improve performance and add an elegant touch.
On the Cover: DRL3042 shown with Black Porcelain Liners and Clean-Faced Kit
DRL3042
DRL3054
G
53-3/4"
65-3/4"
H*
32-1/2"
36-3/8"
I
20-1/2"
20-1/2"
J
44-1/8"
56-1/8"
K
15-11/16"
19-5/8"
Electrical connection (right side or rear)
*Additional 4-3/8"for standoffs
FIREPLACE EFFICIENCIES — Listed to ANSI Z21.88 as a gas fireplace heater. IMPORTANT NOTES:
As with any heating appliance, fireplace or stove, this appliance is extremely hot during operation. Read and understand all operating instructions before using this appliance. For further information, consult your dealer.
MODEL
FUEL
BTU/HR
AFUE**
P4/ENERGUIDE*
DRL3042TEN
NG
22,000
66.7%
54.2%
Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance of the fire and heating performance. Performance can also vary with home design and insulation, climate, condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated.
DRL3042TEP
LP
20,000
69.6%
59.4%
DRL3054TEN
NG
30,000
71.9%
63.2%
DRL3054TEP
LP
30,000
72.1%
65.5%
Diagrams, illustrations and photographs are not to scale—consult installation instructions. Product designs, materials, dimensions, specifications, colors and prices are subject to change or discontinuance without notice.
*Intermittent ignition systems **Annual Fuel Utilization Efficiency (AFUE) is the recognized U.S. rating system for the total efficiency of heating products.
Visit us online
© 2015 Innovative Hearth Products 785624M 01/15
SuperiorFireplaces.us.com
PFS
C
®
US