Pro218(1-2) Hdd Duplicator

Transcript

V 3.0 PRO218(1-2) HDD Duplicator User Guide EN Content Content 2 1 Product Introduction 1. Features 2. Product Overview A. System Overview B. LCD Configuration 3 4 4 4 2 Function Table Function Table 5 3 How To Start Duplicating HDD? 1. Start duplication 7 2. Set-up before start duplication 8 9 ❶ Set copy area of HDD System and Files (fast copy/compare) 9 All Partition 10 Whole HDD 10 Percentage(%) 11 ❷ Set tolerance of bad track 12 3. Troubleshooting of copy fails 12 5 How To Erase HDD? 1. How to Erase? 2. Setting of Erase Function Quick Erase Full Erase DoD Erase DoD Erase Comp Overwrite by fixed method Overwrite by random method 15 16 16 16 16 17 18 18 6 Update BIOS 1. How to update BIOS? Update by HDD 19 19 Specification Specification 21 4 How To Confirm Copy Accuracy? 1. To Confirm Accuracy by Compare Function 13 2 Setting of Compare Function 14 2 Product Introduction 1 1. Features • High copy speed supports up to 6.5GB/min. • Auto power control to protects your HDD.(HDD only powered during operation.) • Support 2.5" and 3.5" SATA HDD, IDE HDD and SSD. (IDE HDD needs convertor) • Support 4 different duplicator mode; quick copy (System and files), All partitions , Whole HDD and Percentage (%) copy. • Support Linux(ext2/ext3/ext4), Windows(NTFS/FAT16/FAT32/exFAT) , Mac (HFS/HFS+/HFSX), GPT, and Dynamic HDD. quick copy mode copies only Data and System area can highly increase the copy efficiency. • Compatible with various file system formats including 3TB above advanced format HDD. • Support DoD and advanced DoD standard erase function. • Auto detect and shows the bad sector quantity. • Automatic power control to protect HDD from damage during insertion/ removal. 3 1 Product Introduction 2. Product Overview A. System Overview Yellow: Power supplying Green: Operating/Pass Red: Fail Port 1 (Source) Port 3 (Target 2) Port 2 (Target 1) B. LCD Configuration Target HDD Total size (Source) Function Time (mm:ss) Copy progress % Copied processed size (Target) 4 Function Table 2 Function Table Function Description 1. Copy Copy data from source HDD to targets. (there are four copy modes for selection at function 6.1) 2. Compare Comparison between the source and targets to make sure copy accuracy. 3. Copy+Compare Execute compare function automatically after copy. 4.1 Quick Erase To erase the INDEX of HDD, and take very short time. 4. Erase 4.2 Full Erase To erase the whole HDD. It is able to enable/disableerase o f source HDD at function 6.3 4.3 DoD Erase Erase HDDs three times complying with USA Department of Defense (DoD) standard. 4.4 DoD EraseComp Erase HDDs three times complying with USA Department of Defense (DoD) standard and bit by bit to check if data is completely erased. 5.1 Show Disk Info Shows HDD’s basic information such as HDD model name and capacity. 5.2.1 Update BIOS To update the system firmware via the HDD. 5. Utility 5.2 Update System 5.2.2 Create Update HDD To format the HDD with a 2GB FAT partition in order to quickly save firmware in the HDD. 5.3 System Info This function will show information of the duplicator system, including controller model number and software version. 6.1.1 System and files Set to copy source HDD's data area only. 6.1 Copy Area Setup copy mode. 6.1.2 All Partitions Set to copy source HDD's. 6.1.3 Whole HDD Set to copy the whole source HDD. 6.1.4 Percentage(%) Set up percentage range of HDD for copy. 6. Setup 6.2 Skip Error Set to ignore error of source HDD while copying. (0-65535 or unlimited to set ignore error of source HDD.) 6.3 Advanced Setup 6.3.1 Copy Unknown Format 5 6.3.1.1 Copy unknown Copy unknown area when the device can not identify the format. 6.3.1.2 Skip unknown Skip copy unknown area when the device can not identify the format. 2 Function Table 6.3.2Erase Master Setup to erase source HDD or not. 6.3.3 Erase Pattern 6.3 Advanced Setup 6. Setup 6.3.2.1 Disable Disable erase source HDD. 6.4.2.2 Enable Enable erase source HDD. 6.3.3.1 ONE Byte A random character to be written into every byte. 6.3.3.2 Big Random Data A set of random character to be written into a set of area. 6.3.4 Wait HDD Time Auto start time after plugging in HDD. Able to set from 3 to 30 seconds. 6.3.5 Transfer Rate Select the proper transfer rate UDMA2-7. 7 is the fastest. 6.3.6 Stop Motor Time To set the time waited for the motor to stop from 1-~20 seconds after executing funciotn. 6.4 Restore Default Back to original manufacturer setting. 6 How To Start Duplicating HDD 3 How To Start Duplicating HDD? 1. Start duplication Step 1 Prepare a source HDD and target HDD (*It is strongly recommended to the size of source and target are the same) Source HDD Target HDD Note ㅦㅦSATA interface applies on the duplicator, no matter SATA 1.0/2.0/3.0 are all supported. ㅦㅦAssemble adaptor is required if user needs to copy device with other interface, e.g. IDE. Step 2 Place source HDD at source port, targets HDD to other ports. 7 3 How To Start Duplicating HDD Step 3 Use ▲▼ to select "1. Copy" then press "OK". Duplication will proceed. Note When all the target HDD ports are plugged, duplicator would start copying automatically. If not all are plugged, the number of targets shows on LCD. Press "OK" to start. The information below shows on LCD during duplication. Copy 7730MB 1:08 78% 5786MB Note ㅦㅦPress ▲▼ together for 5 seconds to stop operation on the slowest HDD. ㅦㅦIt is able to use "On-Time Monitor" feature to check operation speed of every port. Step 4 Quantity of copy OK/Fail and duplication time would show on LCD after duplication completes. Pass:2 Fail:0 Time 30:48 Note ㅦㅦData in the target HDD will be damaged after the copy process completed. Users need to backup the existing data before duplication processing. ㅦㅦWe do not suggest that user removes HDD during copy process because this action may damage HDD. 2. Set-up before start duplication Please pay attention to the following 2 settings before copy. 8 How To Start Duplicating HDD 3 ❶ Set copy area of HDD Choose appropriate copy area can greatly reduce operation time and have better efficiency. There are four copy modes with different copy area : ① System and Files, ② All available partition area, ③ Whole HDD, ④ User set the percentage range of HDD. System and Files (fast copy/compare) It will copy source HDD's System and Files instead of the whole HDD. The system will analyze the source HDD and identify the data area to copy. As long as the source HDD's data within the target HDD's space, the copy will be processed. FAT16/32/64, NTFS, ext2/3/4, HFS+, HFS, HFSX are supported for this copy mode. [Copy Area] System and Files Source Duplication Target Partition 1(150G) Data 30G Partition 1(200G) Data 90G 500GB 500GB Only 120G data area will be copied, it takes 12mintues. 9 3 How To Start Duplicating HDD All Partition This mode will bit by bit copy all of the partitions no matter there is data exist or not. The capacity of target HDD has to be bigger than the partition required capacity [Copy Area] ALL Partitions Source Duplication Target Partition 1(150G) Data 30G Partition 1(200G) Data 90G 500GB 500GB Only 350G partition area will be copied, it takes 48mintues. Whole HDD It is to copy the whole source HDD, no matter of the content, format, partition or empty space. This mode will take much more time to duplicate the source HDD completely. [Copy Area] Whole HDD 10 How To Start Duplicating HDD 3 Duplication Source Target Partition 1(150G) Data 30G Partition 1(200G) Data 90G 500GB 500GB Entire 500GB HDD will be copied. Percentage(%) Copy the percentage selected of source HDD. [Copy Area] Percrntage(%) Source Duplication Target 25％ 25％ 32％ 32％ 500GB Only copy the selected area, other area or data will not be copied. Note Duplication time is affected by "transfer speed of HDD". 11 3 How To Start Duplicating HDD Below is one example of copy area selection e.g. There are two partitions in one 500GB HDD. Data and OS(120GB) are saved in the partition. System and files All partition 500GB Copy/Compare area 30G+90G= 120G Whole HDD 500GB Copy/Compare area 150G+200G= 350G 500GB Copy/Compare area 500G Note ㅦㅦIt is recommended to execute Compare after Copy to confirm the accuracy. ㅦㅦIt is recommended to copy data by function 3.Copy+Compare. ❷ Set tolerance of bad track Select function 6.2 Skip Error to set the number of error you accept to skip during copy process. If the HDD is very critical for content correctness, it is strongly recommended to keep the Skip Error to be "0". [Skip Error] 0 3. Troubleshooting of copy fails ㅦㅦToo many bad track in HDD causes copy fail. ㅦㅦTo check the setting of 6.2 Skip Error. ㅦㅦMake sure SATA cable is connected properly. ㅦㅦMake sure the capacity of source HDD is smaller than target. 12 How To Confirm Copy Accuracy? 4 How To Confirm Copy Accuracy? 1. To Confirm Accuracy by Compare Function Step1 Prepare source HDD and target HDD. Source HDD Target HDD Step 2 Place source HDD at source port, targets HDD to other ports. Step 3 Use ▲▼ to select "2.Compare" then press "OK". Data compare will proceed. Note When all the target HDD ports are plugged, duplicator would start copying automatically. If not all are plugged, the number of targets shows on LCD. Press "OK" to start. 13 4 How To Confirm Copy Accuracy? 2. Setting of Compare Function It is able to set compare area of HDD at function 6.1 There are four different compare area for selection : ① System and Files, ② All available partition area, ③ Whole HDD, ④ Percentage Compare. Note It is recommended to execute Compare after Copy to confirm the accuracy. 14 How To Erase HDD? 5 How To Erase HDD? Note Please notice the data within the HDD will be erased after executing the function. 1. How to Erase? Step1 Prepare the HDD for erasure. Erase HDD Step 2 Insert the HDD into target port. Note Function 6.4.2 Erase Master is to determine erase source HDD or not. The default setting is "Disable erase source HDD". Step 3 Use ▲▼ to select the desired erase method, then press "OK". Data Erase will proceed. 15 5 How To Erase HDD? 2. Setting of Erase Function There are five erase methods: Quick Erase, Full Erase, DoD Erase, DoD Erase Comp and Secure Erase. Quick Erase The function will ONLY erase the index of the HDD. It is the quickest way to erase HDD. It will damage the data in HDD, please make sure you have backup all important data before using this function. Quick Erase Prepare pattern Full Erase The function will erase the whole sectors on the target HDD. It will take longer time than quick erase. It will damage the data in HDD, please make sure you have backup all important data before using this function. Full Erase Prepare pattern DoD Erase This is to comply with the U.S.A. Department of Defense (DoD 5220) standard to fully erase the HDD three times bit by bit to rewrite HDD to guarantee the data was deleted. It will damage the data in HDD, please make sure you have backup all important data before using this function. 16 How To Erase HDD? 5 DoD Erase Prepare pattern Note We do not suggest that user removes HDD during erase process because this action may damage HDD. DoD Erase Comp Besides DoD erase, this function will also execute compare function to make sure the random bit was correctly written. This way of erase is to erase HDD over each sector three times: the first time with zeros (0x00), second time with 0xFF and the third time with random characters. There is one final pass to compare random characters by reading. It will damage the data in HDD, please make sure you have backup all important data before using this function. DoD EraseComp Prepare pattern 17 5 How To Erase HDD? Select random pattern Overwrite by fixed method [Erase Pattren] ONE Byte 3737373737 3737373737 3737373737 3737373737 3737373737 3737373737 3737373737 3737373737 Overwrite by random method [Erase Pattren] Big Random Data 18 26AE891DF 74519D55C E6621457E 48AAB6890 DD51473D AA9A82BBE 55713C485 9CBFFA147 Update BIOS 6 Update BIOS 1. How to Update BIOS? Update by HDD Step 1 Prepare one HDD and connect it to source port, then select function 5.2.2 Format HDD. [Update System] 2.Create Update Step 2 Format the HDD. Do FORMAT HDD#1 Confirm ? Note ㅦㅦBefore updating firmware, one FAT, 2GB partition will be formatted in HDD. That would reduce searching time, and speed up firmware update. ㅦㅦThe data saved in this HDD will be erased. Step 3 Download the latest firmware from PC and save it in HDD. 19 6 Update BIOS Step 4 Insert HDD into source port (first port), select function 5.2.1 Update BIOS. Update would complete in one minute. [Update System] 1.Update BIOS 20 Specification Specification Product Name Carry Mini HDD Dupe Product Number PRO218 Targets 1:2 HDD Interface SATA, IDE(optional) Display Monochrome LCD Control Button 4 push buttons Compatible HDD All major brand of 2.5",3.5" SATA and IDE HDD and SATA SSD 1. System and Files 2. All Partition Duplication Mode 3. Whole HDD 4. Percentage (%) Supports all formate, Quick copy (System and Files) supports Support Formate Linux(ext2/ext3/ext4), Windows(NTFS/FAT16/FAT32/exFAT), Mac (HFS/HFS+/HFSX), GPT, and Dynamic HDD. Capacity 3TB above Power Supply Temperature Humidity 12V, 5A Storage -20˚C~85˚C Working 5˚C~45˚C Storage 5%~95% Working 20%~80% • The above information is for marketing reference only. The actual specification may subject tochange without notice. 21