Transcript
PRO4700 WIRELESS (900MHz) AUDIO KIT KEYPAD, CONSOLE AND 900MHz RECEIVER ASSEMBLY
ASSEMBLY AND OPERATIONS INSTRUCTIONS
PRO4700 WIRELESS AUDIO (900 MHz) KIT CONTENTS Console Box Contents: PRO4700 Wireless Audio Console
PRO4700 Wireless Audio Keypad
Auto Adjusts to Your Activity
Focus on Push and Pull of Upper Body
Like a Personal Trainer
Focus on Lower Body Using Stationary Arms
EQ
Customize Your Stride Length
Audio Jack Assembly
900 MHz Receiver
Keypad Cable
Audio Cable
Heart Rate Cable
900MHz Receiver Cable
Console Hardware
Assembly and Operations Instructions
C-1 C-2
#2 Phillips
PRO4700 WIRELESS (900MHz) AUDIO KIT
#2 Phillips
KEYPAD, CONSOLE AND 900MHz RECEIVER ASSEMBLY
C-3 C-4
ASSEMBLY AND OPERATIONS INSTRUCTIONS
*Hardware illustrated to scale; not actual size.
1
PRO4700 WIRELESS AUDIO (900MHz) KIT ASSEMBLY INSTRUCTIONS Complete these instructions during initial assembly of the PRO4700 elliptical, after mounting the keypad on the mast. For a fully-assembled PRO4700, remove the console, keypad and cable, top cover, and left side shroud to complete these instructions. *Retain all screws for use in this assembly.
A. Audio Jack
B. 900 MHz Receiver
Cables not shown
Route audio cable up through mast hole and out through hole under keypad plate. Remove bottom screw from water bottle holder.
Cables not shown
Route 900MHz cable through mast hole and out through top mast hole on the console side of the mast (not pictured).
Connect audio cable to audio jack assembly (not illustrated).
Place 900MHz receiver on top bar of frame; insert cable tie C-4 (Qty 2) through holes in receiver bracket and secure bracket to frame.
Loosen screws on audio jack assembly; place assembly over mast plate; tighten screws. Secure with screw to water bottle holder.
Connect audio jack cable and receiver cable to 900MHz receiver.
Remove upper left screw from water bottle holder; insert C-1(Qty 1) through C-3 (cable tie); re-attach to water bottle holder and tighten.
Remove slack from audio jack cable and secure under keypad plate with cable tie C-3 (not pictured).
C. Keypad
Connect keypad cables per diagram on keypad; attach keypad to mast plate with C-2 (Qty 4).
2
D. Console
E. User Settings
Keypad (black, 14-pin)
Heart Rate (white, 3-pin)
Console to Base (white, 14-pin)
Fan (white, 2-pin)
Handlebar Control (white, 6-pin)
Console Ground (metal; green wire)
Pedal the unit to activate the keypad for programming.
900MHz Receiver/C-SAFE (white, 5-pin)
Fan (white, 2-pin) Handlebar Control (white, 6-pin)
Console Ground Console to Base Reserved for (white, 14-pin) (metal; green wire) Software Update (black) Heart Rate (white, 3-pin) Keypad (black, 14-pin)
Unused (audio jack) Unused 900MHz Receiver/C-SAFE (white, 8-pin) (white, 5-pin)
Match cable connectors to sockets on console back; connect. Note: White 8-pin socket on console back and audio jack are not used for 900MHz installation. Attach console and covers to mast plate with C-1 (Qty 4).
3
Focus on Push and Pull of Upper Body
EQ
Route cables (Qty 7) through mast plate.
Auto Adjusts to Your Activity
Like a Personal Trainer
Focus on Lower Body Using Stationary Arms
EXIT WITHOUT SAVING
PRESS AND HOLD
EXIT AND SAVE
VIEW OPTIONS
Customize Your Stride Length
Press and hold / to display programming options. Press Enter to view setting options as described on following page; press to select option and move to next setting. (Factory setting shown in BOLD.) Press Enter when “Exit” is displayed to save selections. Press Pause Clear twice to exit without saving changes.
I. Complete Installation Replace top cover and left side shroud, or return to PRO4700 Assembly Instructions to complete assembly of new unit.
Warm-Up Clock Direction Max Workout Time Unit Type 900MHz Channels
USER SETTINGS Controls 3-minute warm-up: ON or OFF Controls clock counting: UP or DOWN Sets limit for workout time: 1 to 99 minutes (factory-set at 30:00). Press Enter to scroll in 15-minute increments, or enter value using number keypad. Controls weight and distance display units: ENGLISH (pounds and miles) or METRIC (kilograms and kilometers) Initiates channel programming; press Enter to begin. Press CH () to select the appropriate program modes for your facility: P-1 = MYE Entertainment 900MHz transmitters P-2 = Cardio Theater LCS 900MHz transmitters P-3 = Cardio Theater / Enercise x TV 900MHz transmitters P-4 = BroadcastVision 900MHz transmitters To automatically scan and program channels: With the proper transmitter mode displayed, press Enter to auto-scan and lock transmitters. Repeat as needed for each transmitter type. Press CH () or CH () to verify that “PRESET” appears in the display, indicating that all transmitters have been locked in. To manually program channels: With the proper transmitter mode displayed, press EQ. Press CH () or CH () to scroll through all transmitter channels. To add or delete a transmitter channel press Enter. NOTE: “PRESET” will appear in the display when a transmitter channel is programmed. To exit manual program mode press the EQ button. The display will blink briefly and will default to first transmitter channel programmed. Use the CH () or CH () to select another transmitter type (P-1 to P-4) as needed and repeat these manual steps.
900MHz Near/Far
Beep
Press EQ to exit 900MHZ CHANNELS and return to user settings. Sets the reception sensitivity of the 900MHz receiver, FAR (for most installations) or NEAR (when receiver is installed 1-5 feet from a transmitter). Press Enter to switch from one setting to the other. The Message Center displays the revised setting for 5 seconds, then returns to 900 MHZ NEAR/FAR. Controls console sounds: ON or OFF.
Brightness Controls brightness of the console LEDs: 1 (dim) to 8 (bright). Exit Press Enter to Exit and save settings. Press Pause Clear twice to exit without saving.
4
900MHz Keypad Buttons The table below describes the buttons controlling wireless audio functions on the PRO4700. Refer to PRO4700 Operations Manual for descriptions of the elliptical programming buttons on the keypad. Mute EQ VOL (/)
CH (/)
EQ
Turn TV audio on/off. Change the audio ambiance. Press EQ to select one of 5 preset EQ tones: FLAT, CLASSICAL, JAZZ, ROCK, BASS Increase/decrease audio volume. Note: When the user stops pedaling for 10 seconds or the console is reset, the volume control is automatically reset to level 2. (VOL () is also used to program 900MHz NEAR/FAR in User Settings.) Move backward () or forward () through the 900MHz channels programmed for your facility.
Learn More at www.octanefitness.com Log on to www.octanefitness.com for additional information about product features and answers to many common questions and tips on using your elliptical. If you would like to speak to an Octane Fitness Customer Service specialist, please call 1-888-OCTANE4 or 763-757-2662, extension 1.
5
N O T E S
6
Are you passionate about your workout and the results? Share your story with others on the Octane Fitness web site. Go to: www.octanefitness.com/testimonials Then click on “Share My Story” and show the world how fueled you are. www.octanefitness.com www.youtube.com/user/octanefitness www.facebook.com/octanefitness
F U E L
Y O U R
Octane Fitness US & Canada, Latin America, Asia & Asian Pacific 9200 Wyoming Avenue North Suite 380 Brooklyn Park, MN 55445 Phone: 888.OCTANE4 (US and Canada) 763.757.2662 (Latin America, Asia and Asian Pacific) Fax: 763.323.2064
L I F E™
Octane Fitness International Europe, Middle East, Africa Rivium Weestlaan 19 2909 LD, Capelle a/d Ijssel The Netherlands Phone: +31 10 2662412 Fax: +31 10 2662444
©2010 Octane Fitness, LLC. All rights reserved. Octane Fitness and Fuel Your Life are registered trademarks of Octane Fitness. Any use of these trademarks, without the express written consent of Octane Fitness, is forbidden.
105603-001 REV A
