Transcript
Procam 500 XT
Information Pris:
1569,00 SEK (ord. 3145,00 SEK)
Beskrivning Artikelnummer: 000000425816 If you’re looking for a protective pack for your camera gear, which can live up to your active and demanding lifestyle, the ProCam 500 XT (extended) is your choice. The innovative Double-High-Density Shell™ combines the best of protection and light weight, whether you’re a professional ski photographer or a dedicated amateur who wish to bike, ski, walk or travel safely with your equipment. The Double-High-Density foam body (DHDS™) is highly shock absorbing and provides stable support and excellent ergonomics thanks to its body moulded shell, regardless if its empty or fully packed. The back panel is also equipped with the internal Impactor Shield™ to enhance protection between the gear and the carrier. The heavily padded insert for your equipment is suspended with four screws, “Anti Vibration Floating Frame™”, to make sure that the equipment stays in place even if its a bumpy road or slope. Shoulder straps and the wide overlapping velcro waist belt are made of top quality neoprene, to provide optimal movement with great grip.
Shoulder straps and the wide overlapping velcro waist belt are made of top quality neoprene, to provide optimal movement with great grip. The generous cargo bay offers space for SLR-zoom set up to 40 cm total length, and plenty of space for extra lenses, netbook pocket, filter pockets and memory storage, all packed in a weather and shock protective shell.
ProCam 500XT Tech Specs: SIZE – 21x13x9 in / 54x33x23cm WEIGHT – 95 oz. / 2700 grams VOLUME - 1830 cu.in. / 30 L INTERNAL DIMENSIONS: With padded equipment insert – 17,3x11x5,5 in / 44x28x14 cm Without padded equipment insert – 20x11,5x6 in / 50x30x15,5 cm Max recommended lens diameter: 4,7 in /120 mm Max total length: SLR body+extender+lens (500mm)+glare cover: 15,7 in / 40 cm (fitting of camera-zoom lens is determined by the size of the opening) Max height SLR House: 4,7in / 12 cm (without netbook in lid compartment: 5,5 in / 14 cm) INTERNAL POCKET DIMENSIONS / (filter pockets): Upper: 6,3x3,5 in / 16x9 cm Lower: 6,3x5,9 in / 16x15 cm Netbook pocket: 12,2x7,5 in /31x19 cm Memory card pockets (3): 2,4x2,4 in/6x6 cm INTERNAL VELCRO DIVIDERS Vertical: 2 Horizontal: 1 Dividers: 11 Security straps: 4 EXTERNAL POCKET: Size: 6,7x8,7 in /17x22 cm WAIST BELT - with cell phone pocket (5,9x2,7 in / 15x7 cm) Overlapping velcro belt with security buckle. Maximum waist length: 47in /120 cm. EXTERNAL ATTACHMENT POINTS: Front: “Fast release” attachment for compact Tripods. Bottom: “Heavy weight” attachment for larger tripods. (With longer straps suitable for sleeping bag). Sides: BOBLBEE SIDEWINDER attachment (accessory). Top: Double webbing straps to attach additional cargo straps. VISIBILITY Front panel: Vertical top-to-bottom reflective piping. Sides: 28 cm2 reflective patch. Shoulder straps: 2x14cm2 reflective patch. (all reflective material 3M). DIRT COVER (with security hook and pouch). Wraps over complete body to protect from spray and dirt. IATA LUGGAGE NORMS Can be used as cabin luggage
BODY Shock absorbing Double-High-Density Shell™. Innovation from Boblbee. Moulded high density foam with rip stop mesh, combining light weight and protection. CAMERA ORGANIZER Anti Vibration Floating Frame™. BACK PANEL / IMPACTOR SHIELD INSIDE™ Moulded high density foam with protective polypropylene panel inside, for back protection. STONE GUARD Aluminium bash plate to protect from sharp objects. SHOULDER STRAPS Moulded neoprene with lycra layer which is soft against arms and body. STERNUM STRAP Enhances weight distribution across the back MATERIALS Body: – Hi density EVA-polyurethane foam, exterior laminated polyester mesh, interior laminated lycra, 210D polyester lining, polyurethane reinforcements. Back plate: - EVA hi-density, PE laminated, polypropylene board, PE binding. Shoulder straps: - Mid density EVA, laminated lycra, PE binding. Waist belt: - Nylon, neoprene, nylon-velcro, 210D polyester, stretch binding. Interior: - EPS foam, polypropylene board, polyester velvet, nylon-velcro.
Interior: - EPS foam, polypropylene board, polyester velvet, nylon-velcro. Zippers internal: - Plastic, steel train, webbing slider. Zippers external: - Plastic-PU coated, steel train, steel/plastic slider. Buckles: - Polyamid 6 (nylon), EPDM rubber gaskets. Straps: - Polypropylene webbing. Fasteners/Guard: - Aluminium-natural anodized, zink/iron screws and nuts Dirt Cover: - 420D polyester.
