Product Catalog 2008–2009

Transcript

g & Si gn al Pr oc ess ing Product Catalog 2008–2009 N , SO P I , r Fibe ET /S , DH Ro ut in network-electronics.com • vpginc.com ISO 9001 RoHS Network Electronics is ISO 9001:2000 certified. RoHS – the Restriction of the use of certain Hazardous Substances in ISO 9001 Certified an EU directive banning electrical and m Ne k electronic equipment containing more o r Ce tific ion at electrical and electronic equipment is than agreed level of certain hazardous substances from 1 NORWEGIAN ACCREDITATION QUAL 001 Certificate no. 900752 July 2006. It is very important that manufacturers show commitment to the outside environment, and many customers, even outside Europe, ask for RoHS compliance at tender stage. The ISO 9001:2000 certification of Network Electronics’s systems and internal routines is a proof of our commitment Both Network Electronics’ product lines VikinX and Flashlink to steadfast quality improvement throughout the are compliant with the requirements of Directive 2002/95/ organisation. EC on the Restriction of the use of certain Hazardous Substances (RoHS). In today’s demanding business environment, this is an important certification both for the manufacturer and even more important for demanding customers who do not want WEEE to spend time auditing suppliers. One of the challenges in the world is the growing amounts of Electronic Equipment As part of the ISO 9001:2000 certification, an independent (EE) waste that is not sorted and treated accredited board will carry out annual audits of the properly. Network Electronics has company’s systems and routines. implemented return facilities for all products that we bring to market. NEBS Level 3 Network Electronics is fully compliant with the requirements Many products from Network / VPG have been tested to of Directive 2002/96/EC on the Waste Electrical and verify their compliance with the requirements of NEBS (or Electronic Equipment (WEEE). “Network Equipment Building System”) Level 3. Products that meet these stringent environmental safety and electromagnetic compatibility standards are qualified for use in telecom central office environments in the United States, and customers around the world recognize the level of reliability indicated by a NEBS Level 3 certification. The specifications for NEBS are managed by Telcordia Technologies (www.telcordia.com). Contents Chapter 1 VPG Intro page 8 1.1 Ventura .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ventura Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Element Management . . . . . . . . . . . . . . . . . . . . . . . . Monitoring and Test System . . . . . . . . . . . . . . . . . . Time Division Multiplexing . . . . . . . . . . . . . . . . . . . . SONET/SDH Network Interfaces .. . . . . . . . . . . . . . . Wavelength Division Multiplexing .. . . . . . . . . . . . . Converters and Embedders/De-embedders .. . . . . Single Channel Fiber .. . . . . . . . . . . . . . . . . . . . . . . . . High Definition .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP Network Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Speciality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SFP Selection Index .. . . . . . . . . . . . . . . . . . . . . . . . . . 10 13 16 18 25 26 30 44 54 64 66 70 76 1.2 Plus Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitoring and Test System .. . . . . . . . . . . . . . . . . . 78 TV-1 Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 TV-C Plus .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Chapter 2 10 1.3 BravoNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BravoNet Chassis and Power Supply .. . . . . . . . . . . Element Management . . . . . . . . . . . . . . . . . . . . . . . . Monitoring and Test System .. . . . . . . . . . . . . . . . . . ASI Multiplexer/Network Adapter . . . . . . . . . . . . . . ASI/SDI 270 Multiplexer/Network Adapter . . . . . . ASI/SDI Protection Switching . . . . . . . . . . . . . . . . . . 84 86 88 90 96 100 84 78 Network Intro page 102 2.1 Flashlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Flashlink Housings .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frame .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 N-BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 MOT-BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Flashlink Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . System Controller (GYDA-SC) .. . . . . . . . . . . . . . . . . 110 Modular Distribution Amplifiers .. . . . . . . . . . . . . . . 112 Embedders/De-embedders . . . . . . . . . . . . . . . . . . . . 116 HD to SD Downconverter with Framesync and ARC .. . . . . . . . . . . . . . . . . . . . . 129 Video Conversion .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Audio Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Synchronisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 Automatic Changeover Modules . . . . . . . . . . . . . . . 136 EO and OE Converters . . . . . . . . . . . . . . . . . . . . . . . . 137 Time Division Multiplexers .. . . . . . . . . . . . . . . . . . . . 146 RF over fiber Modules .. . . . . . . . . . . . . . . . . . . . . . . . 147 Datacom Interfaces .. . . . . . . . . . . . . . . . . . . . . . . . . . 148 RS-422 and GPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Automatic Protection Switching and Optical Distribution .. . . . . . . . . . . . . . . . . . . . . . 150 2 ch. WDM – Optical Multiplexing . . . . . . . . . . . . . 151 Optical Multiplexing .. . . . . . . . . . . . . . . . . . . . . . . . . 152 Optical Multiplexing / CWDM .. . . . . . . . . . . . . . . . 154 Optical Multiplexing / DWDM . . . . . . . . . . . . . . . . . 155 EDFA .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 IP Gateways .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Flashlink Micro .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Distribution Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . 163 Embedders/De-embedders . . . . . . . . . . . . . . . . . . . . 164 Video Conversion .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Audio Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Synchronisation Modules .. . . . . . . . . . . . . . . . . . . . . 165 Automatic Changeover Modules . . . . . . . . . . . . . . . 165 EO and OE Converters . . . . . . . . . . . . . . . . . . . . . . . . 166 Datacom Interfaces .. . . . . . . . . . . . . . . . . . . . . . . . . . 167 Flashlink Micro Accessories . . . . . . . . . . . . . . . . . . . . 167 1RU Compact Distribution Amplifiers .. . . . . . . . . . . . . . . . . 106 110 162 2.2 VikinX .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 VikinX Sublime .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 Analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 Analog Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 SD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 3G-HD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . 177 Digital Audio .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 RS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 VikinX Sublime Accessories . . . . . . . . . . . . . . . . . . . . 180 VikinX Modular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Redundancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 Modular Frames .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 SD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184/186 HD Digital Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185/187 Analog Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Digital Audio .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 Telecom .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 VikinX Configuration, Control and Monitoring .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Direct and remote control .. . . . . . . . . . . . . . . . . . . . 191 Control and Monitoring .. . . . . . . . . . . . . . . . . . . . . . 192 Ethernet Connections .. . . . . . . . . . . . . . . . . . . . . . . . 193 Control Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 VikinX Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 VikinX Compact .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202 Analog Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 Analog Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Component Analog Video .. . . . . . . . . . . . . . . . . . . . 206 SD Digital Video .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Digital Audio .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Telecom .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 RS-422 Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 VikinX Accessories .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Power Supply Frames . . . . . . . . . . . . . . . . . . . . . . . . . 214 Desktop Power Supply . . . . . . . . . . . . . . . . . . . . . . . . 215 168 2.3 NETCARE .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Flashlink Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 network-electronics.com |3 The Global Video Transport Leader Network Electronics designs, manufactures and markets a portfolio of video transport solutions of unrivalled breadth and depth. The acquisition of Video Products Group, Inc. (VPG) of Oxnard, California in January of 2008 has further enhanced the company’s global presence and reputation for providing industry leading solutions to the video, broadcast and telecommunications markets. Network Electronics’ competitive solutions are highly functional and deployment-proven, creating future-proof transport architectures that fully meet campus, short-haul, metro and long-distance. For contact information: www.network-electronics.com The Global Video Transport Leader Ventura • SONET/SDH and IP network interfaces and multiplexers • JPEG 2000 and MPEG-2 encoders and decoders • Optical multiplexing; CWDM and DWDM • Multi-format metropolitan transport • Carrier class specifications and features (NEBS) Flashlink • Fiber optics • Optical multiplexing; CWDM and DWDM • Time division multiplexing • Signal processing and distribution • Highly cost-efficient • Very compact and low-power VikinX – routing range • VikinX Sublime – Ethernet control – 3Gbps single link support for 1080p HDTV – Ultra low power consumption – Sizes from 8x8 to 64x64 • VikinX Modular – HD-SDI, SD-SDI, analog audio, AES/EBU – Configuration up to 256x256 with 6 | network-electronics.com increments of 32x32 network-electronics.com |7 Ventura Versatile solutions 3 compliance. Ventura cards are hot-swappable, and in The Ventura™ line of modular signal transport solutions many instances are field-configurable, using SFP modules is designed with carrier-class specifications and features in to support CWDM, DWDM and 1310/1550 transport. mind. Whether it is dark fiber transport, telco interfacing to Ventura equipment protects signal integrity with integrated SONET/SDH or IP with or without signal multiplexing, the HD jitter attenuation, sub-millisecond recovery from Ventura platform fulfils today’s and future signal transport signal interruptions and a self-configuring browser-based needs. The NEBS-compliant Ventura platform can transport management system. analog or digital video with associated audio as well as data in a variety of formats, thus providing probably the Network / VPG is extending the Ventura line with the most versatile products for high quality content delivery. introduction of new modules developed to facilitate the JPEG 2000 and MPEG2 compression schemes enable video compression, transmission and economical transport of HD transport over a wide range of network interfaces and bit signals. The new modules, including a JPEG 2000 encoder rates. and decoder, an 8-channel SONET/SDH multiplexer and Flexible networks de-multiplexer, and a universal analog digital video/audio adapter for fiber optic transport, provide Ventura customers Ventura products provide conversion and transport with greater ability to meet the challenges of transporting solutions for non-compressed analog and digital optical high definition signals and managing diverse legacy and signals, mostly in the metro area network environment. emerging signal formats. The compression and long The extensive selection of Ventura cards and space- distance interfaces extend the reach of the Ventura line, and efficient Ventura chassis enable customers to create flexible the universal conversion capability enables customers to networks—networks that support a wide variety of formats, adapt to evolving regulatory requirements in metropolitan recover nimbly from signal interruptions and provide a long- networking. lasting return on investment. Adaptable capabilities Key features • Metropolitan area and long distance networking The Ventura line supports all video formats, as well as • SONET/SDH and IP network interfaces and multiplexers Ethernet, RS422, DS3 and 155Mbps signals. The VS103 3RU, • JPEG 2000 and MPEG-2 encoders and decoders 10-slot chassis and the VS101 1RU, 3-slot chassis can each • Optical multiplexing; CWDM and DWDM run on AC or DC power, are compatible with all Ventura • Carrier-class specifications and features (NEBS) cards, and meet the stringent requirements of NEBS Level BRAVOnet Robust bandwidth operations on a single DS3 line, or for slipless ASI switching— BRAVOnet is Network / VPG’s high port-density, carrier-class technology that transforms a signal-break event from a 7 – transport product suite that provides telco operators and 10 second viewer annoyance and advertiser nightmare into broadcasters with a solution for transporting multiple DVB- an imperceptible switch to the alternate signal source. ASI signals and different video formats over SONET/SDH and PDH telco networks with an unmatched bandwidth Features utilization. • ASI bandwidth optimization Optimized real-time performance BRAVOnet boasts the highest ASI payload in the industry, with up to 16 ASI streams on DS3 and OC-3 networks. Like the Ventura line, BRAVOnet provides carrier-class, NEBS • Maximizes ASI payload capacity • Simultaneous transport of multiple compressed and uncompressed digital video signals • Manages, controls and protects each transport stream individually Level 3 compliant, transport, but BRAVOnet specializes in • Duel-channel intelligent slipless switching optimizing the structured formats and multiplexing for • Full transport stream protection for digital television long distance. Customers select BRAVOnet for bandwidth networks efficiency, such as its ability to carry two ATSC-HD channels PLUS Series Point-to-point fiber optic ­transport solutions value and space efficiency with the convenience of a Web- TV-C PLUS encoders and decoders perform high quality automated alerts for DVB-ASI, SDI, SDTI and associated MPEG2 compression of SDI or composite video as well as audio signals, these element management products provide analog or digital audio. TV-C PLUS comes with a variety tools to simplify deployment of a standard template of of interfaces for SDH/PDH, IP and DVB-ASI networks. The chassis and cards to multiple remote locations. intuitive graphical user interface of the TV-C PLUS software shortens setup time and eases operation. FOCUS Element Management Simplified deployment based interface. In addition to monitoring and providing Cost efficient Network / VPG’s element testing and management solutions offer high visibility and powerful troubleshooting tools at an extremely low cost per channel. Every level of ETR 101 – 290 The Focus product line supports sophisticated signal reporting for up to sixteen channels can be made available integrity analysis and trouble-shooting of transport from a 1RU monitoring system. Network / VPG network equipment––whether the equipment is from Network / management products are designed to achieve a maximal VPG or another vendor. Focus products combine attractive result with a minimal cost of ownership. network-electronics.com |9 VENTURA 1.1 Chassis VS101-AC / VS101-DC 1RU Chassis for the Ventura Series • Both AC and DC versions available • 3 slots for any combination of cards from the Ventura series • Single, field-replacable power supply included • A second, external, field-installable power supply option is available for AC or DC which includes a dual redundant load-sharing board • Hot swappable cards in any slot • Field serviceable fans • Transparent front panel to view card LEDs • Sliding front panel for card access • 19” rack mountable with removable flange for center or wall mounting • Optional Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet, without occupying a card slot • NEBS Level 3‑compliant DC version for central office applications AC Power Supply (Internal) chassis Voltage Power Frequency Current Efficiency Weight 90-250VAC, 90-264VAC 60W 47-63Hz 1.1A max 82% typical 10.0 lbs. (4.5 kg) ELEMENT management Optional advanced element management features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS101 chassis. The element management card is installed over the power supply so that it does not occupy or interfere with card slots. An RJ45 connector is located on the rear of the chassis for access to the network system. An RJ11 jack is also provided for connecting an RJ11-to-DB9 converter cable for serial access. Physical and Environmental # of Card Slots 3 Rack Space 1RU x 19” rack Dimensions 1.75” x 19” x 14” Cooling Field serviceable fans Grounding Nut Use 18 AWG or thicker Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% 10 | network-electronics.com Redundant AC Power Supply (External) Voltage Power Frequency Current Efficiency Weight 90-264VAC 50W 47–63Hz 1.35A max 75% typical 1.2 lbs. (0.54 kg) DC Power Chassis Voltage Power Efficiency Weight 35-72 VDC 50W 81% typical 10.0 lbs. (4.5 kg) Redundant DC Power Supply (external) Voltage Power Efficiency Weight 35-72 VDC 50W 81% typical 2.0 lbs. (0.9 kg) Ordering Options VS101-3-AC 1RU AC Ventura chassis with 3 card slots VS101-3-PSAC Internal power supply VS101-3-RPSAC Redundant AC power supply (load sharing board included) VS101-3-DC 1RU DC Ventura chassis with 3 card slots VS101-3-PSDC Internal DC power supply VS101-3-RPSDC Redundant DC power supply (load sharing board included) VS101-3-EMS Built-in comprehensive element management VS101-3-AEMS Built-in Advanced Element management VENTURA Chassis and Power Supplies 1.1 VS103 / VS113 / VS123 VS103 4RU Chassis and VS113-A/C and VS123-D/C Power Supplies • Robust carrier-class design • 10 slots for any combination of cards from the Ventura series • Dual redundant load sharing power supplies, available in AC or DC, ensure maximum system up time • Hot swappable cards and power supplies • Field serviceable fans ensure system longevity • Front panel summary LEDs of power supply status, board monitors and fan monitors • Drop-down door for card access • Passive chassis backplane • 19” rack mountable • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet ELEMENT management FCS183-AEMS features SNMP and Web browser interfaces that provide monitoring and/or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis. Physical and Environmental # of Card Slots 10 Rack Space 4RU x 19” rack Dimensions 5.25” x 19” x 14” Weight AC chassis: 11.22 lbs. DC chassis: 10.93 lbs. Power Input Connectors AC–IEC320 DC–3 way terminal screw Fuse AC–4A/250V DC–5A anti-surge Cooling 3 field-replaceable fans per tray located underneath each PSU and top front exhausting fan tray, alarmed, redundant and field-replaceable Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Summary LED Indicators System LEDs Three sets of summary alarm LEDs are visible on the front of the VS103 when the door is closed. LED set includes power supply status, board monitors and fan monitors. Backplane Power LEDs DC Power Green Major Red Minor Yellow Board Monitors LEDs Major Red Minor Yellow Fan Monitors LEDs Major Red Minor Yellow Alarm and Monitoring Connector A 37-way D-Type connector provides direct access to the major and minor alarm lines and serial bus for each card in the chassis. Ordering Options VS103-AC-IFA 4RU AC Ventura chassis VS103-DC-IFA 4RU DC Ventura chassis VS113 AC power supply VS123 DC power supply VS111 1RU heat baffle VS112 1RU heat baffle with fans FCS183-AEMS Advanced Element Management System FCS183-EMS Element management system AC Power Supplies Voltage Power Frequency Efficiency Weight 90–264VAC 200W 47–63Hz 70% at full load 1.67 lbs. LED indicators Power LEDs AC Power Green Major Alarm Red Minor Alarm Yellow Ordering Options VS103-AC-IFA 4RU AC Ventura chassis VS113 AC power supply dc power supplies Voltage Power Efficiency Weight 35-72 VDC 200W 70% at full load 1.70 lbs. LED indicators Power Monitors DC Power Green Major Alarm Red Minor Alarm Yellow Ordering Options VS103-DC-IFA VS123 4RU DC Ventura chassis DC power supply network-electronics.com | 11 VENTURA 1.1 12 | network-electronics.com VENTURA Element Management 1.1 FCS183 Web browser with SNMP Element Management System • Web browser and SNMP user interfaces • Automatic card recognition • User definable alarms (major, minor or no alarm) • Status and configuration of card settings • Provides history with date/time stamping for each card • Two levels of user and password access privileges • Fan and power supply alarm status • Inband element management • Firmware remotely downloadable over Internet/Intranet • Provides interface to third party element management systems through standard SNMP MIBs • Access up to 32 chassis through a single IP address or via one RS232 port • NEBS Level 3 compliant Network VS103 Ventura chassis V S 1 8 3 Ethernet snmp # of Trap Destinations Trap Information Trap Configuration MIB II sysDesc sysObject sysUpTime sysContact sysName sysLocation sysServices 5 Trap number Trap attachment through Web browser interface RS232 Connector Baud Rate S L O T S L O T S L O T S L O T S L O T S L O T S L O T S L O T # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 # 10 Element Management Connector RJ45 Link Speed 10Mbps (10BaseT) IP Settings IP Address Subnet Mask Gateway Password Levels Administrator User Operating Systems Windows 98 Windows 2000 Professional Windows XP Professional Linux Web browsers Internet Explorer 6.0 Netscape 7.2 Standard MIB Parameters S L O T DB9 (female) 9600, 1 stop bit, 8 data bits, no parity Features SNMP and Web browser interface that provides monitoring and/ or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis. Sample Alarms Loss of input Loss of video EDH errors Loss of audio Laser failure Optical low light Upstream transmitter alarms Sample Status Control settings SFP transmitter wavelength SFP transmitter output power Model and serial number Sample Controls Laser transmitter (enable or disable) Control set by (netman or onboard switches) Receiver input mode (optical or electrical) SDI default signal (ON or OFF) Mux channel (enable or disable) Test pattern generator (enable or disable) Line standard (NTSC or PAL) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption 2W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options LED indicators FCS183-AEMS Activity Link DC power FCS183 Focus comprehensive element management card network-electronics.com | 13 VENTURA 1.1 Advanced Element Management FCS183-AEMS Advanced Element Management System SNMP agent #1 SNMP manager #1 Get, Set Inform SNMP agent #N BRAVOnet Get, Set Network AEMS Inform SNMP manager #N SNMP agent Web browser Web browser Web server #X Web manager #X VS103 Ventura chassis F A N P O W E R P O W E R # 2 # 1 V S 1 8 3 A E M S S L O T S L O T S L O T S L O T S L O T S L O T S L O T S L O T S L O T # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 # 10 The FCS183-AEMS is a Linux-based element management card managing the Ventura series cards. It acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FCS183-AEMS can be configured to control other cards using a remote and secure Telnet session. The FCS183-AEMS is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. It uses residual power to save the data and shuts down in a controlled manner. • Automatic recognition, control and operation of line cards • Web browser and SNMP based monitoring and controlling • Remote firmware download for FCS183-AEMS and other line cards using remote and secure Telnet session • Date/time stamped history and data recording in Flash memory (buffer) • Chassis environment reporting using temperature and fan speed sensor (LED indicators) • On-board microprocessor details: 100MIPS, 32-bit RISC based SoC, External 128Mb flash and 64Mb SDRAM • Safe operation transfer to updated firmware (starts using new firmware after validation) • Linux-based system • User definable alarms based on priority (major, minor or no alarm) 14 | network-electronics.com VENTURA Advanced Element Management 1.1 FCS183-AEMS Advanced Element Management System Back plane FCS183-AEMS Front Panel LEDs and RJ-45 Linux based single board computer 32-bit SoC 100MIPS DIP Switch Connector panel Ethernet Transformer RJ-45 PC and Alarm Processing IDC-50 Serial Ports RS232 (x2) PC Lines and Alarms 128Mb Flash 64Mb SDRAM Programmable General Purpose I/O GPIO (8 I/Os) Power Conversion FCS183-AEMS as snmp agent A single FCS183-AEMS acts as the proxy agent for up to 9 Ventura line cards, 2 power supplies and the fan assembly placed in the VS103 chassis. Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls for Ventura series cards installed in a VS103 chassis. Some of the features are given below: – SNMPV2c ready – Telnet based remote and secure login – Remote firmware downloads LED INDICATORS DC DC power supply status ECG Device status LINK Ethernet link status ACT Ethernet activity status CARD VS-183 AEMS alarm status SHELF Line cards alarm status PROG Can be user configured PHYSICAL and Environmental FCS183-AEMS – AEMS card resides in a single slot of a VS103 Ventura series chassis. Voltage 5V or 3.3V chassis supply Power Consumption 2W max Operating Temp 0 °C/32°F to 50 °C/122°F Storage Temp -40 °C/-40°F to 85 °C/185°F Relative Humidity 5% to 85% Compliance NEBS level 3, UL, CSA, CE, FCC (Part 15, Class A), C-TICK, and RoHS. Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10/100 Mbps No. of Connectors Single access dual interface (front and rear access: Two ports are provided for a common access) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported) RS232 / EIA232 For Linux system configuration Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector Micro-D 9-pin No. of Connectors 1, with 8 user configured, TTL compatible I/O lines Ordering Options FCS183-AEMS Advanced Element Management System card GPIO Cable FCS183-AEMS general purpose input/output card connector cable network-electronics.com | 15 VENTURA 1.1 Monitoring and Test System FCS1000 DVB-ASI/SDI Monitoring and Test System FCS1000 provides a high-density, cost-effective QoS monitoring solution. Each input has a 270Mbps interface, allowing monitoring of either DVB-ASI signals or serial digital video signals. Service management is provided via an embedded PC-based processor which provides a full Simple Network Management Protocol (SNMP) interface and Web browser display. All alarm conditions can be mapped into SNMP traps as well as individual GPI outputs for local alarms. • In-service monitoring for up to 16 channels in 1RU • DVB-ASI or SMPTE 259 SDI capable • Checking of all DVB input streams to ETR 101 290 • Checking to SMPTE RP165 on SDI input streams • High-impedance passive ‘BNC Tee’ for each channel • Comprehensive SNMP traps and informs • Separate GPI contact alarms for each channel • Full internal diagnostics • ASI stream handling from 16Kbps – 216Mbps • 10/100baseT Ethernet management port • Serial port communications for local diagnostics and ISDN/PSTN adapters • Powerful alarm filtering and logging • QoS profile presets and weekly scheduling • Remote uploads of new schedules and firmware upgrades 16 | network-electronics.com VENTURA Monitoring and Test System 1.1 FCS1000 DVB-ASI/SDI Monitoring and Test System OPERATION Browser based, multi-channel, menu-driven QoS monitoring system. Configurable for SDI or ASI in groups of four. A set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTE RP165 or ETR 101290. Up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling. An alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. Individual channel SNMP informs are generated and sent based on the settings of this screen. DVB-ASI Monitoring SMPTE 259M SDI Monitoring ETR 101 290 SMPTE RP165 Signal present Signal present TS sync loss EDH–Missing TS sync byte errors EDH–Packet error PAT error Active Picture (AP) EDH error here Continuity count error AP error detected already PMT error AP unknown error status PID error Full Field (FF) error detected here PCR error / accuracy FF error detected already CAT error FF unknown error status NIT error Ancillary (ANC) error detected here SDT error ANC error detected already EIT error ANC unknown error status RST error Other alarms TDT error Video black RS FEC Error Freeze frame Continuity count Audio (group error, silence, phase and overload) Power and Environmental Power Automatic 110~240 V AC, IEC connector Power Consumption 0.15A , 240VAC, <35W Cooling Forced via side intake and exhaust vents Operating Temperature Between 0 °C and 50 °C Operating Humidity 10% to 90% (non-condensing) ELEMENT management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls. Some of the features are: - SNMP V2c ready - Telnet based remote and secure login - Remote firmware downloads Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10Mbps No. of Connectors Single access (16 channels) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 RS232 / EIA232 For Linux system configuration (two connectors, front and rear access) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector DSUB-25 pin No. of Connectors 1, with 16 TTL compatible I/O lines Physical Width Height Depth Weight Front panel: 19” EIA standard (483mm) (exc. rack ears: 440m) 1.7” (43mm), 1RU 19” (484mm) (including rear connectors) 11lbs. (5kg) (6kg with delivery packing) Ordering Options FCS1000 Focus Monitoring and Test System (formerly named TIMS) network-electronics.com | 17 VENTURA 1.1 Time Division Multiplexing VS411 4-Channel SDI/ASI Multiplexer/Demultiplexer • Multichannel digital data on a single fiber • Designed to transport 270Mbps signals complying with SMPTE-259M, 305M and DVB-ASI EN-50083-9 • Removes timing and alignment jitter from the SDI signals at the demux output • Loss of video, loss of optical input, laser failure LEDs • Automatic cable equalization up to 300m for Belden 8281 • Selectable test pattern generator for each channel • Enable/disable control for each channel • EDH QoS monitoring on each channel for SDI • Auxiliary RS422 channel • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS411-EO VS411-OE Front panel monitor CH1 SDI (SMPTE-259M) CH2 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH3 CH4 Front panel monitor 1310/1550/CWDM APD Rcv’r 1.302Gbps 1310/1550/CWDM 270Mbps Network APD Rcv’r RS422 Digital video CH2 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH3 DVB-ASI (EN50083-9) CH4 RS422 ELEMENT management Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of inputs 4 (VS411-EO) # of outputs 4 (VS411-OE) Monitors 1 (VS411-EO and VS411-OE) Connector BNC Impedance 75 Ohm Data rate 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of outputs Connector Data rate Laser type Laser wavelengths Output power level Fiber type CH1 1 SC/PC 1.3Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode optical receiver # of inputs 1 Connector SC/PC Receiver type APD pigtail Input wavelengths 1260nm – 1620nm Sensitivity ≤–32dBm Max input power –8dBm Fiber type Single mode RS422 # of channels 1 Connector 3 pin polarized header Data rate Up to 1Mbps LED indicators VS411-EO VS411-OE Channel 1 loss of video Channel 1 loss of video Channel 2 loss of video Channel 2 loss of video Channel 3 loss of video Channel 3 loss of video Channel 4 loss of video Channel 4 loss of video Laser failure Loss of input 18 | network-electronics.com Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Channel 1 loss of video Channel 2 loss of video Channel 3 loss of video Channel 4 loss of video Laser transmitter failure (VS411-EO) Loss of input (VS411-OE) Status Model and serial number Transmitter power level (VS411-EO) SFP laser transmitter wavelength (VS411-EO) SFP receiver installed (VS411-OE) Receiver power level (VS411-OE) Laser power Optical receiver power Controls Laser transmitter enable/disable (VS411-EO) Pattern generator enable Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS411-EO-SFP Transmitter w/SFP cage, no optics installed VS411-OE APD receiver installed SFP Options SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C 1310nm laser 1550nm laser 1470nm CWDM laser 1490nm CWDM laser 1510nm CWDM laser 1530nm CWDM laser 1550nm CWDM laser 1570nm CWDM laser 1590nm CWDM laser 1610nm CWDM laser VENTURA Time Division Multiplexing 1.1 VS411-OO 4-Channel SDI/ASI Optical Regenerator • Optical regeneration of multichannel digital data on a single fiber • Designed to regenerate optical signal of data rate 1.3025 Gbps from any VS411-EO • Removes timing and alignment jitter from the SDI signals at the demux output • Loss of optical input, laser failure LEDs • Small Form-factor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS411-EO CH1 SDI (SMPTE-259M) CH2 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH3 CH4 VS411-OO 270Mbps 1.3Gbps 1310/1550/ CWDM APD Rcv’r 1.3Gbps VS411-OE 1.3Gbps 1310/1550/ CWDM APD Rcv’r 270Mbps RS422 Digital video Standards RS422 ELEMENT management 1.3025Gbps Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type CH1 CH2 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH3 DVB-ASI (EN50083-9) CH4 1.3Gbps 1 SC/PC 1.3025Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode Compatible with the FCS183 and FCS183-AEMS that feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Laser transmitter failure Loss of input Status Model and serial number SFP laser installed Laser enable Laser wavelength (nm) Laser power (dBm) SFP receiver installed Optical receiver power (dBm) Controls Laser transmitter enable/disable optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm–1620nm Sensitivity ≤–32dBm Max Input Power –8dBm Fiber Type Single mode LED indicators Laser failure Loss of input physical and environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Power Consumption +3.3V, +5V, 5W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS411-OO SFP Options SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C Optical regenerator with SFP-R3-APD receiver installed 1310nm laser 1550nm CWDM laser 1470nm CWDM laser 1490nm CWDM laser 1510nm CWDM laser 1530nm CWDM laser 1550nm CWDM laser 1570nm CWDM laser 1590nm CWDM laser 1610nm CWDM laser network-electronics.com | 19 VENTURA 1.1 Time Division Multiplexing VS411-EO-SFP-SFP* / VS411-OE-SFP-SFP* 4-Channel SDI/ASI Fiber Multiplexer/Demultiplexer with Protection VS411-EO VS411-OE Front panel monitor Front panel monitor CH1 SDI (SMPTE-259M) CH2 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH3 CH4 RS422 1310/1550/CWDM APD Rcv’r 1.302Gbps 1310/1550/CWDM 270Mbps Network APD Rcv’r CH1 CH2 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH3 DVB-ASI (EN50083-9) CH4 RS422 • Multichannel digital video on a single fiber • Optional second optical output for network path diversity (multiplexer) and optional second optical receiver for automatic switchover and network resilience (demultiplexer) • Designed to transport 270Mbps signals complying with SMPTE-259M, 305M and DVB-ASI EN-50083-9 • Removes timing and alignment jitter from the SDI signals at the demultiplexer output • LEDs to indicate loss of video, loss of optical input and laser failure • Automatic cable equalization up to 300m for Belden 8281 • Selectable test pattern generator for each channel with EDH • Enable/disable control for each channel • EDH QoS monitoring on each channel for SDI at multiplexer input and demultiplexer output • Auxiliary RS422 channel • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet *Scheduled availability Q2 2008 20 | network-electronics.com VENTURA Time Division Multiplexing 1.1 VS411-EO-SFP-SFP* / VS411-OE-SFP-SFP* Digital video ELEMENT management Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of inputs 4 (VS411-EO) # of outputs 4 (VS411-OE) Monitors 1 (VS411-EO and VS411-OE) Connector BNC Impedance 75 ohms Data rate 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of outputs Connector Data rate Laser type Laser wavelengths Output power level Fiber type 2 SFPs SC/PC 1.3Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode optical receiver # of inputs 2 SFPs Connector SC/PC Receiver type APD SFP Input wavelengths 1260nm – 1620nm Sensitivity ≤–32dBm Max input power ≥–8dBm Fiber type Single mode RS422 # of channels 1 Connector 3 pin polarized header Data rate Up to 1Mbps LED indicators VS411-EO-SFP-SFP VS411-OE-SFP-SFP Channels 1-4 Channels 1-4 LED Lights Green Signal Yellow Loss of signal Flash green Test pattern only Flash green Test pattern only Laser failure Loss of input Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms On each video channel of EO and OE Loss of video EDH On network interface Laser transmitter failure on EO Loss of inputs on OE Status On each video channel of EO and OE Channel On or Off Format SDI or ASI SDI rate 525/60 or 625/50 Pattern generator enabled or disabled Pattern generator 525 or 625 line On network interface Laser present on EO Wavelength on EO Receiver present on OE Optical power on OE General Model and serial number Firmware revision Controls On each video channel of EO and OE Enable or disable channel Force SDI or ASI Enable or disable test pattern On network interface Enable or disable laser on EO Ordering Options VS411-EO-SFP-SFP Transmitter w/SFP dual cage, no optics installed VS411-OE-SFP-SFP Receiver with dual SFP cages and one SFP installed SFP Options SFP-T3-1310-S 1310nm laser SFP-T3-1550-S 1550nm laser SFP-T3-1470-C 1470nm CWDM laser SFP-T3-1490-C 1490nm CWDM laser SFP-T3-1510-C 1510nm CWDM laser SFP-T3-1530-C 1530nm CWDM laser SFP-T3-1550-C 1550nm CWDM laser SFP-T3-1570-C 1570nm CWDM laser SFP-T3-1590-C 1590nm CWDM laser SFP-T3-1610-C 1610nm CWDM laser SFP-R3-1APD APD SFP receiver Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick *Scheduled availability Q2 2008 network-electronics.com | 21 VENTURA 1.1 Time Division Multiplexing VS811 8-Channel SDI/ASI Multiplexer/Demultiplexer • Multichannel digital data on a single fiber • Optional second optical output for network path diversity (Mux) and optional second optical receiver for automatic switchover and network resilience (Demux) • Designed to transport 270Mbps signals complying with SMPTE-259M, 305M, and DVB-ASI EN-50083-9 • Removes timing and alignment jitter from the SDI signals at the Demux output • Selectable test pattern generator for each channel: Color bars, PLL pathological, equalizer pathological and black field • Enable/disable control for Mux input channels • Automatic cable equalization up to 300m for Belden 8281 • Auxiliary RS422 channel • Small Formfactor Pluggable (SFP) optics available CH1 in 1310, 1550 or any ITU CWDM or DWDM CH2 wavelength 270Mbps CH3 CH4 • NEBS Level 3 compliant CH5 • Compatible with the FCS183-AEMS Advanced SDI (SMPTE-259M) CH6 SDTI (SMPTE-305M) Element Management System that provides remote DVB-ASI (EN50083-9) CH7 status, alarms and configurations via SNMP and CH8 Ethernet VS811-EO VS811-OE CH1 CH2 3.125Gbps 1310/1550/CWDM 1310/1550/CWDM APD Rcv’r 270Mbps Network CH3 3.125Gbps APD Rcv’r RS422 Digital video CH6 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH7 DVB-ASI (EN50083-9) CH8 RS422 external alarms Standards SDI (SMPTE-259M), SDTI (SMPTE-305M), DVB-ASI (EN50083-9) # of Inputs 8 (VS811-EO) # of Outputs 8 (VS811-OE) Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type 270Mbps CH4 CH5 2 SC/PC 3.125 Gbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode N/C relay contact outputs for major and minor alarm signals. element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of video Laser transmitter failure (VS811-EO) Loss of input (VS811-OE) Status Channels enabled/disabled (VS811-EO) Selected test pattern Test pattern generator enabled/disabled Model and serial number SFP transmitter installed Transmitter wavelength Laser power SFP receiver installed Optical receiver power Controls Test pattern generator enable/disable Input channel enable/disable (VS811-EO) Laser transmitter enable/disable (VS811-EO) optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm–1620nm Sensitivity ≤-30dBm Max Input Power –8dBm Fiber Type Single mode RS422 # of Channels 1 Connector 3 pin polarized header Data Rate Up to 500 Kbps LED indicators VS811-EO VS811-OE Channel 1 loss of video Channel 1 loss of video Channel 2 loss of video Channel 2 loss of video Channel 3 loss of video Channel 3 loss of video Channel 4 loss of video Channel 4 loss of video Channel 5 loss of video Channel 5 loss of video Channel 6 loss of video Channel 6 loss of video Channel 7 loss of video Channel 7 loss of video Channel 8 loss of video Channel 8 loss of video SFP Primary laser failure Loss of primary input SFP Second. laser failure Loss of secondary input DC power DC power 22 | network-electronics.com Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V Power Consumption 10W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS811-EO-SFP VS811-OE-SFP SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C SFP-R3-APD Multiplexer card w/dual SFP cages, no optics installed Demultiplexer card w/dual SFP cages, no optics installed 1310nm SFP laser module 1550nm SFP laser module 1470nm CWDM SFP laser module 1490nm CWDM SFP laser module 1510nm CWDM SFP laser module 1530nm CWDM SFP laser module 1550nm CWDM SFP laser module 1570nm CWDM SFP laser module 1590nm CWDM SFP laser module 1610nm CWDM SFP laser module SFP APD receiver VENTURA Time Division Multiplexing 1.1 VS811-OO 8-Channel SDI/ASI Optical Regenerator • Optical regeneration of mutichannel digital data on a single fiber • Designed to regenerate optical signal of data rate 3.125 Gbps from any VS811-EO • Removes timing and alignment jitter from the SDI signals at the demux output • Small Form-factor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS811-EO VS811-OO VS811-OE CH1 CH1 CH2 270Mbps CH3 CH4 CH5 SDI (SMPTE-259M) CH6 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH7 CH8 3.125Gbps 1310/1550/ CWDM APD Rcv’r 3.125Gbps 3.125Gbps 1310/1550/CWDM 1310/1550/ CWDM APD Rcv’r CH2 CH3 3.125Gbps CH6 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH7 DVB-ASI (EN50083-9) CH8 APD Rcv’r 1310/1550/ CWDM RS422 Digital video Standards RS422 element management 3.125Gbps Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type 270Mbps CH4 CH5 1 SC/PC 3.125Gbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode Compatible with the FCS183 EMS and FCS183-AEMS which feature SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Laser transmitter failure Loss of input Status Model and serial number SFP laser installed Laser enable Laser wavelength (nm) Laser power (dBm) SFP receiver installed Optical receiver power (dBm) Controls Laser transmitter enable/disable optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm–1620nm Sensitivity ≤-30dBm Max Input Power –8dBm Fiber Type Single mode physical and environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Power Consumption +3.3V, +5V, 5W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick LED indicators Laser failure Loss of input external alarms N/C relay contact outputs for major and minor alarms signals. Ordering Options VS811-OO-SFP SFP Options SFP-T3-1310-S SFP-T3-1550-S SFP-T3-1470-C SFP-T3-1490-C SFP-T3-1510-C SFP-T3-1530-C SFP-T3-1550-C SFP-T3-1570-C SFP-T3-1590-C SFP-T3-1610-C Optical regenerator with SFP-R3-APD receiver installed 1310nm laser 1550nm CWDM laser 1470nm CWDM laser 1490nm CWDM laser 1510nm CWDM laser 1530nm CWDM laser 1550nm CWDM laser 1570nm CWDM laser 1590nm CWDM laser 1610nm CWDM laser network-electronics.com | 23 VENTURA 1.1 Time Division Multiplexing VS9345 DS3/E3 DVB-ASI TS Multiplexer Bandwidth Optimizer • Multiplexes four DVB-ASI inputs into one DS3 (45Mbps) or E3 (34Mbps) output • Maximizes ASI payload capacity (up to 43.8Mbps over a 45Mbps network) • Inputs can be switched to any output • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Each input TS is assigned conditional access codes (2 layers) for secure content delivery • Compatible with the FCS183 Advanced Network Management System that provides remote status, alarms and configurations via SNMP and Ethernet MUx INPUT SIGNALS Input signal type Maximum Payload Number of inputs Input/output levels Input impedance (ASI) Cable equalizer (max) OUTPUT SIGNALS Output signal type Framing Impedance/connector Number of outputs Network management/alarms 270Mbps DVB-ASI - EN50083-9 or ASI2, containing data from 800kbps up to 43.8Mbps DS3 43.8Mbps E3 33.9Mbps 4 800mV(pk-pk) 75 ohm 200m of Belden 8281 cable MUX CONTROLS Input rate setting Ch 1 to 4: Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4: Add / don’t add DVB checking Ch 1 to 4: Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects network interface type Channel ID codes Ch 1 to 4: Sets each TS’s conditional access codes (2) 45Mbps – DS3 (B3ZS) 34Mbps – E3 (HDB3) DS3 C-bit parity E3 G.751 75 ohm / BNC 2 identical buffered outputs MUX ALARMS (set as either; none, major or minor) Card fail Card fault Input loss Ch 1 to 4: No input Input rate violation Ch 1 to 4: Allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4: RS, PID, PAT, PMT, SES or ES errors 45Mbps – DS3 (B3ZS) C-bit parity 34Mbps – E3 (HDB3) G.751 75 ohm / BNC 2 with automatic switching for protection and 1 loop through for receiver chaining DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Switch persistence Error persistence to enable protection switch to operate Input mode Selects network interface type BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4: Sets each TS’s conditional access codes (2) Demux INPUT SIGNALS Input signal type Impedance/connector Number of inputs OUTPUT SIGNALS Output signal type Number of outputs Impedance/connector 270Mbps DVB-ASI - EN50083-9 4 x 270Mbps DS3 / E3 75 ohm / BNC Power consumption/environment VPG9345TX/RX Operating temperature Storage temperature Humidity <20W (All options) 0 °C to +50 °C –10 °C to +70 °C 20% – 80% RH, non-condensing DEMUX ALARMS (set as either; none, minor or major) Card fail Card fault Input loss Loss of frame alignment Configuration error Ch 1 to 4: Error in data type or conditional access code Input errors Ch 1 to 4: Rate exceeds programmed thresholds Standby input selected Standby network input is being used by DEMUX DVB error Channel 1 to 4: RS, SES errors Ordering Options Contact factory for ordering information. 24 | network-electronics.com VENTURA SONET/SDH 1.1 VS811-S SDI/ASI SONET/SDH Multiplexer/Demultiplexer • Multichannel digital video over OC-48c or STM-16 network tributary • Optional second optical output at Mux and optional second optical receiver at Demux for path diversity with automatic switch over • Manages SONET/SDH pointer adjustments • Removes timing and alignment jitter from the 270Mbps signals at the Demux output • Format independent 270Mbps inputs can carry SDI, SDTI and DVB-ASI • Enable/disable control for Mux input channels • Selectable test pattern generator for each channel: color bars, PLL pathological, equalizer pathological and black field • Automatic cable equalization providing 300m at 270Mbps • Auxiliary RS422 channel for inband management • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant VS811-SM-48 • Configurable to 1 HD and 2 SDs; CH1 scheduled availability in 2008 CH2 CH3 SDI (SMPTE-259M) CH4 SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH5 CH6 CH7 CH8 VS811-SD-48 CH1 CH2 OC-48c 1310/1550/DWDM 1310/1550/DWDM CH3 CH4 SDI (SMPTE-259M) SDTI (SMPTE-305M) CH5 DVB-ASI (EN50083-9) CH6 APD Rcv’r SONET/SDH Network APD Rcv’r CH7 STM-16 CH8 RS422 Digital video Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs (VS811-SM-48) 8 x 270Mbps # of Outputs (VS811-SD-48) 8 x 270Mbps Connector BNC Impedance 75 Ohm Data Rate 270Mbps ± 100ppm Equalization 300m w/Belden 8281 Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type RS422 Framing 1 primary with optional secondary (SFP) SC/PC 2.488Gbps (OC-48/STM-16) SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode Optical receiver # of Inputs 1 primary with optional secondary (SFP) Connector SC/PC Receiver Type APD SFP Input Wavelengths 1260nm – 1620nm Sensitivity ≤-30dBm at BER of 10E-10 Max Input Power –8dBm at BER of 10E-10 Fiber Type Single mode RS422 # of Channels 1 Connector 3 pin polarized header Data Rate Up to 500 Kbps LED indicators VS811-SM-48 VS811-SD-48 Channels 1-8 Channels 1-8 LED Lights Green Signal Yellow Loss of signal Flash green Test pattern only SFP Primary laser failure Loss of primary input SFP Secondary laser failure Loss of secondary input DC Power DC power OC-48 STM-16 STS-48c, ANSI, T1.105 STM-16; ITU-Rec G.707 External alarms N/C relay contact outputs for major and minor alarm signals. Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of video and section, line, path Laser transmitter failure (VS811-SM-48) Loss of input (VS811-SD-48) Status Channels enabled/disabled (VS811-SM-48) Selected test pattern Test pattern generator enabled/disabled Model and serial number Controls Optical standard (SONET/SDH) Test pattern generator enable/disable Input channel enable/disable (VS811-SM-48) Laser transmitter enable/disable (VS811SM-48) Physical and environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V Power Consumption 10W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering options VS811-SM-48 VS811-SD-48 SFP-T3-1310-S SFP-T3-1550-S SFP-T3-XX-D SFP-R3-APD 8X270Mbps multiplexer to SONET/SDH OC-48/STM-16, 2.485Gbps 8x270Mbps demultiplexer to SONET/SDH OC-48/STM-16 1310nm SFP laser module 1550nm SFP laser module where XX = ITU DWDM grid number SFP APD Receiver network-electronics.com | 25 VENTURA 1.1 Wavelength Division Multiplexing VS402/404/408 2-Channel, 4-Channel and 8-Channel Optical CWDM • Bidirectional channels • Environmentally stable • 20nm channel spacing • Low return loss • Very low insertion loss • ITU G.694.2 standards compliant • High channel isolation • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS402 cwdm Standards ITU-T G.694.2 # of I/O Channels 2 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1310, 1550 Channel Separation 20nm Insertion Loss 1dB max Link Loss w/mux/demux combo ≤2.0dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode VS404 cwdm Standards ITU-T G.694.2 # of I/O Channels 4 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1510, 1530, 1550, 1570 Channel Separation 20nm Insertion Loss 1dB max Link Loss w/Mux/Demux Combo ≤2.0dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode VS408 cwdm Standards ITU-T G.694.2 # of I/O Channels 8 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Channel Separation 20nm Insertion Loss 1.5dB max Link Loss w/mux/demux combo ≤2.5dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode 26 | network-electronics.com LED indicators VS402/VS404/VS408 DC power ELEMENT management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Status Model and serial number Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS402-CWDM VS404-CWDM VS408-CWDM 2-Channel CWDM optical multiplexer/ demultiplexer 4-Channel CWDM optical multiplexer/ demultiplexer 8-Channel CWDM optical multiplexer/ demultiplexer VENTURA Wavelength Division Multiplexing 1.1 VS409 9-Channel Optical CWDM • 8 CWDM wavelengths plus 1310nm legacy • Bidirectional channels • Environmentally stable • 20nm channel spacing • Low return loss • Very low insertion loss • ITU G.694.2 standards compliant • High channel isolation • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS409 cwdm ELEMENT management Standards ITU-T G.694.2 # of I/O Channels 9 Common Output 1 Connector SC/PC Optical Wavelengths (nm) 1310, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610 Channel Separation 20nm Insertion Loss 1.8dB max Link Loss w/mux/demux combo <3.0dB Return Loss ≥50dB Input Power 300mW max Polarization Dependent Loss ≤0.1dB Fiber Type Single mode LED indicators VS409 DC power Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Status Model and serial number Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS409-CWDM 9-Channel CWDM optical multiplexer/ demultiplexer network-electronics.com | 27 VENTURA 1.1 Wavelength Division Multiplexing VS401SP 2-Channel Optical Splitter • Half power split — 50/50 • Environmentally stable • Low insertion loss, typically less than 3.6dB including split, connector and internal losses • Wide wavelength range covering all CWDM wavelengths • Directivity better than 50dB • Low polarization dependent loss • NEBS Level 3 compliant Optical # of Inputs # of Outputs Connector Input Wavelength Range Insertion Loss Return Loss Output Power Thermal Stability Fiber Type Physical and Environmental 1 2 SC/PC 1260nm–1620nm 3.6dB max on each output ≥–55dB 50/50 split ±0.1dB Single mode DC power element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Status Ordering Options VS401SP LED indicators VS401SP Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Model and serial number 28 | network-electronics.com 2-Channel optical splitter VENTURA Wavelength Division Multiplexing 1.1 VS401SW 2-Channel Optical Switch • 2 X 1 optical path protection • Directional light on each input • Each path is fully bi-directional • Accepts all CWDM wavelengths • Revertive and non-revertive switching modes • Fast 10ms switching time • Front panel and remote netman manual switch • Low loss <2dB • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet optical element management # of Input Channels 2 (primary and secondary) # of Outputs 1 Connector SC/PC Insertion Loss 2dB max Switch Channel Crosstalk >55dB Switching Time <10ms Switch Triggered at –35dBm Switch Stimulation Automatic (at -35dBm) Manual (Front panel push button) Element management (forced) Switch Mode Settings Revertive Non-revertive Wavelength Range 1260nm–1620nm Fiber Type Single mode LED indicators VS401SW Primary input present Secondary input present Primary input selected Secondary input selected Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of primary input Loss of secondary input Status Primary input (present/not present) Secondary input (present/not present) Selected input (primary/secondary) Selected mode (revertive/non-revertive) Model and serial number Controls Input select (primary/secondary) Mode select (revertive/non-revertive) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V Power Consumption <1W Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS401SW 2-Channel optical switch network-electronics.com | 29 VENTURA 1.1 Converters and Embedders VS312 SDI/ASI Audio Embedder/De-Embedder • SDI, SDTI and DVB-ASI compatible with automatic input signal detection • Removes timing and alignment jitter from the SDI signal • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both • Asynchronous or synchronous 48Khz audio with 20-bit audio resolution • Available in 600 ohm or Hi-Z • Default SDI keep-alive signal • Loss of video, EDH, SDI video present, loss of input, loss of audio LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS312-E SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) Analog Audio 270Mbps 270Mbps Network 270Mbps 270Mbps SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) CH2 (R1) CH2 (R1) CH3 (L2) CH3 (L2) CH4 (R2) CH4 (R2) Digital Audio AES1 AES1 AES2 AES2 Digital video Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 digital Audio Standards AES/EBU (SMPTE-272M) # of Inputs 2 (VS312-E) # of Outputs 2 (VS312-D) Connector BNC (unbalanced) 3-pin terminal (balanced) Impedance 75 ohm (unbalanced) 110 ohm (balanced) Sampling Rates 48 KHz, 44.1 KHz and 32 KHz Output Rate 48 KHz Resolution 20-bit Format Synchronous or asynchronous Output Level 1 Vp-p (unbalanced) 2 Vp-p min (balanced) analog audio Standards Exceeds RS250C short haul specs # of Inputs 4 (L1,R1,L2,R2) (1 group) (VS312-E) # of Outputs 4 (1 group) (VS312-D) Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling Rate 48 KHz Quantization 20-bit SNR Unweighted -90dBFS Frequency Response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0dBFS) IMD <0.05% SMPTE @ +2dBu Crosstalk Between Ch. 95dB Input/Output Level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohm) 30 | network-electronics.com VS312-D Analog Audio Digital Audio LED indicators VS312-E VS312-D Error detection handling Error detection handling Loss of input Loss of input Loss of video Loss of video SDI input present SDI input present ASI input present ASI input present Loss of audio 1 Loss of AES 1–2 Loss of audio 2 Loss of analog 1–4 Loss of audio 1 Loss of audio 2 ELEMENT management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of input Loss of video EDH errors Loss of audio VS312-E uplink transmitter alarms (VS312-D) Status ASI input detected SDI input detected Incoming embedded audio detected Model and serial number Controls Force to ASI mode enable/disabled Select pre-embedded or local embedding mode (VS312-E) SDI generator Remove or retain audio from SDI output (VS312-D) ID setting for the VS312 (0-65535) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 10W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS312-E VS312-D SDI audio embeddder SDI audio de-embedder VENTURA Converters and Embedders 1.1 VS501 SDI/ASI 270Mbps Audio Embedder/De-Embedder and Fiber Optic Transport • SDI, SDTI and DVB-ASI compatible • Removes timing and alignment jitter from the SDI signal • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both • Asynchronous or synchronous 48Khz audio with 20-bit audio resolution • Default SDI keep-alive signal • AES audio present, analog audio present, SDI video present, ASI video present, laser fail, DC power, EDH, loss of input and loss of audio LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small formfactor pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS501-EO SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) 1310/1550/CWDM SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 digital Audio Standards AES/EBU (SMPTE-272M) # of Inputs 2 (VS501-EO) # of Outputs 2 (VS501-OE) Connector BNC (unbalanced) 3-pin terminal (balanced) Note: see VS312 data sheet for more detailed specifications analog audio Standards exceeds RS250C short haul specs # of Inputs 4(VS501-EO) # of Outputs 4 (VS501-OE) Connector 3-pin terminal Note: see VS312 data sheet for more detailed specifications Optical transmitter 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type 270Mbps 270Mbps SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) CH2 (R1) CH3 (L2) CH3 (L2) CH4 (R2) CH4 (R2) AES1 AES1 AES2 AES2 Analog Audio Digital Audio LED indicators Standards # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 270Mbps Network CH2 (R1) Digital Audio Digital video VS501-OE 270Mbps 270Mbps CH1 (L1) Analog Audio PIN Rcv’r 270Mbps 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode VS501-EO Note: same as the VS312 VS501-OE ELEMENT management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Note: same as the VS312 plus the following: Alarms Laser transmitter failure (VS501-EO) Optical low light (VS501-OE) VS501-EO uplink transmitter alarms (VS501-OE) Status VS501-EO uplink transmitter status (VS501-OE) Model and serial number Laser wavelength Laser power SFP receiver installed Optical receiver installed Controls Laser transmitter enable/disable (VS501-EO) Electrical/optical receiver input mode (VS501-OE) SDI pattern enable ID setting for the VS501 (0-65535) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS501-EO VS501-OE Transmitter card PINFET receiver SFP Options SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-PIN network-electronics.com | 31 VENTURA 1.1 Converters and Embedders VS551 Composite Analog Video and Audio to SDTI 270Mbps w/Fiber Optic Transport • Converts NTSC/PAL analog video to SDTI for transport over a 270Mbps network Analog Video • Embeds up to four channels of analog audio (NTSC/PAL) • 12-bit video quantization, 20-bit audio quantization • Unintrusive audio monitoring and level adjustment CH1 (L1) • Composite test pattern generator Analog CH2 (R1) • Loss of input, loss of video, EDH, loss of audio LEDs Audio CH3 (L2) CH4 (R2) • Optical (optional) and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Analog video Digital video Standards SDTI (SMPTE-305M) # of Inputs 1 (VS551-DAC) # of Outputs 1 (VS551-ADC) Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281 analog audio Standards Exceeds RS250C short haul specs # of Inputs 4 (VS551-ADC) # of Outputs 4 (VS551-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling Rate 48 KHz Quantization 20-bit SNR Unweighted -90dBFS Frequency Response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0dBFS) IMD <0.05% SMPTE @ +2dBu Crosstalk Between Ch. 95dB Input/Output Level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohm) Optical transmitter (optional) Fiber Type VS551-DAC Analog Video (NTSC/PAL) 1310/1550/CWDM 270Mbps SDTI (SMPTE-305M) 270Mbps Network 270Mbps SDTI (SMPTE-305M) CH1 (L1) CH2 (R1) CH3 (L2) CH4 (R2) optical receiver (optional) Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of Inputs 1 (VS551-ADC) # of Outputs 1 (VS551-DAC) Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC), <1% (PAL) Differential Phase <0.7° (NTSC), <0.5° (PAL) # of Outputs Connector Laser Type Laser Wavelengths Output Power Level VS551-ADC 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 and 1550) -0.5dBm min (CWDM) Single mode # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type LED indicators VS551-ADC VS551-DAC Loss of audio for each ch. Loss of audio for each channel Loss of video (VID) Loss of video (VID) EDH EDH DC power Loss of input (LOI) Loss of frame (LOF) DC power Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of audio 1-4 Loss of video Status SFP present SFP transmitter wavelength SFP power level Controls Laser transmitter enable/disable Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS551-ADC-SFP Analog to digital converter w/audio embedder (SFP cage included) SFP Sold Separately SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C VS551-DAC-SFP SFP Sold Separately SFP-RV-PIN 32 | network-electronics.com | network-electronics.com 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C Digital to analog converter w/audio deembedder (SFP cage included) Analog Audio VENTURA Converters and Embedders 1.1 VS551-D-ADC-SFP Transmitter – Universal Analog & Digital Video/Audio Adapter for Fiber Optic Transport • Automatically detects video input format • Converts NTSC/PAL/PAL-M Video and ATSC, SD-SDI, HD-SDI and DVB-ASI inputs to SDTI/SDI and optical output for transport over 270Mbps network • Handles 525/625 SD-SDI and 1.4835/1.485Gbps HD-SDI • Composite test pattern generator • Converts up to four channels of analog audio to AES • Dolby E – compatible • Non-intrusive audio monitoring and level adjustment • Embeds AES converted from analog audio or direct-fed AES into SDTI, SD-SDI or HD-SDI • Warning LEDs for loss of video, loss of audio, CRC/EDH • Small Form-factor Pluggable (SFP) optics available in 1310, 1550, and any ITU CWDM or DWDM wavelength • Engineered to meet NEBS Level 3 requirements • Compatible with FCS183 AEMS and EMS element managers Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm Signal level Unbalanced 1.2 Vp-p Balanced 1 to 7 Vp-p Resolution Supports up to 24 bits Sample rates 32kHz, 44kHz, 48kHz sample rates converted to 48kHz optical TRANSMITTER Digital video Standards SDTI (SMPTE-305M), SDI (SMPTE-259M), HD-SDI (SMPTE-292M), DVB-ASI (EN50083-9), ATSC (SMPTE-310M) # of inputs 1 # of outputs 2 electrical, 1 optical Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard analog audio Standards Exceeds RS250C short haul specs # of inputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted -90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 ohms) # of outputs Connector Laser type Laser wavelengths Output power level Fiber type 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 & 1550) -0.5dBm min (CWDM) Single mode LED indicators Video mode HD/SD/ASI Loss of input CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Ordering Options VS551-D-ADC-SFP Analog to digital converter with audio embedder (SFP cage Included, SFP sold separately) For optical interface options, see Ventura SFP Index data sheet. network-electronics.com | 33 VENTURA 1.1 Converters and Embedders VS551-D-DAC-SFP Receiver – Universal Analog and Digital Video and Audio Adapter for Fiber Optic Transport • Receives all SD-SDI, HD-SDI, ASI and ATSC optically and electrically • De-embeds four channels of audio from SD-SDI and HD-SDI and provides AES and analog outputs • Dolby E – compatible • Converts SDTI to NTSC/PAL/PAL-M • Non-intrusive analog audio monitoring and level adjustment • Loss of input, loss of video, EDH/CRC, loss of audio LEDs • Remote loss of video and loss of audio LEDs • Small Formfactor Pluggable (SFP) optics with APD receiver for optimum sensitivity • Engineered to meet NEBS Level 3 requirements • Compatible with the FCS183 comprehensive element management system that provides remote status, alarms and configurations via SNMP and Ethernet Analog video DIGITAL audio Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) Digital video Standards # of inputs # of outputs Monitors SDTI (SMPTE-305M) SDI (SMPTE-259M) HD-SDI (SMPTE-292M) DVB-ASI (EN50083-9) ATSC (SMPTE-310M) 1 optical (see optical spec), 1 electrical 2 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard analog audio Standards Exceeds RS250C short haul specs # of outputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48KHz Quantization 20-bit SNR unweighted -90dBFS Frequency response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, at 0dBFS) IMD <0.05% SMPTE at +2 dBu Crosstalk between channels 95dB Input/output level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohms) 34 | network-electronics.com Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm, unbalanced Signal level Unbalanced 1.2Vp-p Balanced 1 to 7Vp-p Resolution Supports up to 24 bits optical RECEIVER # of inputs Connector Receiver type Input wavelengths Sensitivity Max input power Fiber type 1 SC/PC SFP - APD 1260nm - 1620nm ≤-34dBm –8dBm (+7dBm with 15dB attenuator) Single mode LED indicators Video Mode HD/SD/ASI Loss of input (local and remote) CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 (local and remote) element management Compatible with the FCS183 Comprehensive Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Ordering Options VS551-D-DAC-SFP Universal analog and digital video and audio fiber receiver VENTURA Converters and Embedders 1.1 VS601 Composite Analog Video to SDTI 270Mbps Converter • Converts NTSC/PAL analog video to SDTI for transport over a 270Mbps network • Exceeds RS250C short haul specifications • 12-bit quantization • Analog loop thru and 75 ohm termination switch • Front panel monitor port with EQ and gain adjustment • Default SDTI keep-alive signal • Loss of input and loss of video LEDs • Automatic cable equalization up to 300m for Belden 8281 • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Analog Video (NTSC/PAL) VS601-ADC 270Mbps SDTI (SMPTE-305M) Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines) PAL (625 lines) # of Inputs 1 (VS601-ADC) # of Outputs 1 (VS601-ADC) 2 (VS601-DAC) Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 130m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC) <1% (PAL) Differential Phase <0.7° (NTSC) <0.5° (PAL) Digital video Standards SDTI (SMPTE-305M) # of Inputs 1 (VS601-DAC) # of Outputs 2 (VS601-ADC) Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 270Mbps Network 270Mbps SDTI (SMPTE-305M) VS601-DAC Analog Video (NTSC/PAL) element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of video Loss of input (VS601-DAC) Status 75 ohm termination ON/OFF (VS601-ADC) Model and serial number Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS601-ADC Composite analog video to SDTI converter VS601-DAC SDTI to composite analog video converter LED indicators VS601-ADC VS601-DAC Loss of video Loss of video Loss of input network-electronics.com | 35 VENTURA 1.1 Converters and Embedders VS621 Analog to SDTI Video/Data Converter • Emulates the functions of the PCO5000 fiber link • Accommodates both video and data inputs • Converts composite video signal or wideband 12MHz analog bandwidth into a SMPTE 305M SDTI stream • More than 30dB optical link budget; low noise, high linearity conversion • LED indicators and external alarm contacts for video, data and optics • Balanced and unbalanced inputs and outputs • Front panel buffered monitor outputs • Front panel level (or gain) and cable equalization adjustments • 3Vpp/50 ohm version available • NEBS Level 3 compliant • SFP optics supporting all standard and CWDM applications General SDI Electrical interface parameters Input signal types No. of channels/chassis Wideband mode spec. NTSC, wideband 12 MHz analog passband 10 NASA: 79K33043 Specification of Wideband Fiber Optic Terminal Equipment Video mode specifications RS-250C Short Haul (video mode) Framing SMPTE 305M / SMPTE 259M VS621-ADC Input interface Input levels Input impedance Return loss Common mode rejection Cable equalizer max 1 Vpp*, nominal ± 3dB (adjustable) 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable) >40dB, 0–5 MHz >30dB, 0–10 MHz >70dB at 60Hz 130m, up to 12MHz (Belden 8281) Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000TX VS621-DAC output interface Output levels Output impedance Rear panel Front panel 1 Vpp*, nominal ± 3dB (adjustable) Dual 75 ohm* unbalanced or 124 ohm balanced (user-selectable) 75 ohm unbalanced, flat, pre-equalized monitor port >40dB, 0–5 MHz >60dB, 0–5 MHz 130m, up to 12MHz Return loss Module-to-Module isolation Cable equalizer max. Ith Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000RX Optical interface parameters # of Outputs # of Inputs Connector Laser Type Laser Wavelength Output Power Level–ADC Sensitivity–DAC Fiber Type 1 (VS621-ADC) 1 (VS621-DAC) SC/PC SFP 1310nm, 1550nm, CWDM, DWDM (please contact us for DWDM optics) -0.5dBm min -34dBm Single mode System frequency response Video Mode Analog/Digital Mode ± 0.15dB, 10Hz–5MHz ± 0.35dB, 10Hz–8MHz ± 0/-3dB, 8MHz–12MHz 36 | network-electronics.com Physical Interface SMPTE 259M Format SMPTE 305M Coax Drive Up to 300m (Belden 8281) Cable EQ Up to 300m (Belden 8281) General Video Performance Specifications Gain Inequality Delay Inequality Intermodulation Chroma non-linear gain distortion Chroma non-linear phase distortion Luminance non-linearity Differential Gain Differential Phase Transient non-linearity Dynamic Gain of Picture Signal Signal to Low Frequency Noise pp Luminance Signal-to-weighted RMS Noise Signal-to-Periodic Noise Signal-to-Impulse Noise ± 1 IRE ± 10ns <1% for 50% APL <0.5% for 50% APL <0.5° for 50% APL <2% <1% <0.5° <1% <1% >53dB >68dB >67dB >65dB Analog/Data Signal distortions Total harmonic distortion Signal-to-noise ratio Peak-to-peak jitter Overshoot Bit Error Rate >40dB below 1 Vpp sinewave >50dB at -27dBm receiver optical power, 1 Vpp signal to 12MHz band-limited noise <5% up to 4Mbps, tested with 1 Vpp NRZ signal and 215 -1 pseudo-random bit sequence <10% <1 x 10-9, 1kbps to 4Mbps PHYSICAL AND ENVIRONMENTAL Temperature range Power requirements 0-50 °C ambient <7W Ordering Options VS621-PCO5000TX Analog to digital VS621-PCO5000RX Digital to analog VS621-3V-PCO5000TX Analog to digital (3Vpp/50 ohm) VS621-3V-PCO5000RX Digital to analog (3Vpp/50 ohm) VENTURA Converters and Embedders 1.1 VS651 Composite Analog Video to Component SDI 270Mbps Converter • Converts analog composite video to digital component SDI • 10-bit processing for optimum linearity and SNR • Comprehensive VBI handling • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Meets TV-1 service specifications • Exceeds RS250C short haul specifications • Proprietary selectable comb/bandsplit filtering for top quality dynamic performance • Automatic cable equalization up to 300m for Belden 8281 • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Analog Video (NTSC/PAL) VS651-ADC 270Mbps SDI (SMPTE-259M) SDI (SMPTE-295M) 270Mbps Network SDI (SMPTE-259M) 270Mbps Analog Video (NTSC/PAL) VS651-DAC Analog Video (NTSC/PAL) Reference Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines) PAL (625 lines) # of Inputs 1 (VS651-ADC) 1 reference video (VS651-ADC) # of Outputs 2 (VS651-DAC) Connector BNC Impedance 75 ohm Quantization 10-bit or 8-bit Equalization Up to 150m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC) <1% (PAL) Differential Phase <0.7° (NTSC) <0.5° (PAL) Digital video Standards SDI (SMPTE-259M) # of Inputs 1 (VS651-DAC) # of Outputs 2 (VS651-ADC) Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of input (VS651-DAC) DC power alarm (VS651-DAC) Status Selected mode NTSC/PAL/AUTO (VS651-DAC) 270Mbps PAL detected/not detected (VS651-DAC) 270Mbps NTSC detected/not detected (VS651-DAC) Model and serial number (VS651-DAC) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0˚ to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS651-ADC Composite analog video to component SDI digital converter VS651-DAC Component SDI digital to composite analog video converter LED indicators VS651-ADC VS651-DAC 625/525 lines NTSC video 10bit/8bit PAL video Sync (analog timing reference) Loss of input Lock (composite Y input present) DC power +5V Configuration complete network-electronics.com | 37 VENTURA 1.1 Converters and Embedders VS661 Composite Analog Audio and Video to Component SDI 270Mbps Converter w/Fiber Optic Transport • Embeds up to four channels of analog audio • 20-bit audio quantization • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Meets US telco TV-1 service specifications (GR-338-CORE) • Exceeds RS250C short haul specifications • Proprietary selectable comb/bandsplit filtering for top quality dynamic performance • Automatic cable equalization up to 300m for Belden 8281 • Front panel monitor and calibration adjustments • User-definable alarms based on priority • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 (VS661-ADC) # of outputs 2 (VS661-DAC) Monitors 1 (VS661-ADC) Connector BNC Impedance 75 Ohm Quantization 10-bit Equalization Up to 150m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) Digital video Standards SDI (SMPTE-259M) # of inputs 1 (VS661-DAC) # of outputs 2 (VS661-ADC) Connector BNC Impedance 75 Ohm Data rate 270Mbps Equalization Up to 300m w/Belden 8281 analog audio Standards Exceeds RS250C short haul specs # of inputs 4 (VS661-ADC) # of outputs 4 (VS661-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 Ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted –90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 Ohm) OPTICAL CHARACTERISTICS # of Outputs # of Inputs Connector Laser type Laser wavelength Output power level – ADC Sensitivity - DAC Fiber type VS661-ADC VS661-DAC Analog Video (NTSC/PAL) 1 (VS661-ADC) 1 (VS661-DAC) SC/PC SFP 1310nm, 1550 nm, CWDM, DWDM (please contact us for DWDM optics) -0.5 dBm min -34dBm Single mode 38 | network-electronics.com Analog Video (NTSC/PAL) SDI Analog Audio 270Mbps Network SDI CH1 (L1) CH1 (L1) CH2 (R1) CH2 (R1) CH3 (L2) CH3 (L2) CH4 (R2) CH4 (R2) Analog Audio LED indicators VS661 – ADC Minor alarm (MIN) LED (red) Loss of composite video input, loss of SDI video output, or loss of audio Major alarm (MAJ) LED (red) board failure or communication failure Input present (VID) LED (green) composite video input present Power OK (DC) LED (green) power supply ok Audio channel 1 (AUD1) LED (yellow) ON with alarm, normally OFF Audio channel 2 (AUD2) LED (yellow) ON with alarm, normally OFF Audio channel 3 (AUD3) LED (yellow) ON with alarm, normally OFF Audio channel 4 (AUD4) LED (yellow) ON with alarm, normally OFF VS661 – DAC Input present (SDI) LED (red) SDI video present Audio group (AUD) LED (yellow) Audio group present Power (+5V) LED (green) +5V DC power present Alarm (ALM) LED (yellow) flashes with alarm, normally OFF Set-up and alignment 10 character alphanumeric display Element management Compatible with FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. PHYSICAL AND ENVIRONMENTAL Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 7W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS661-ADC Composite analog audio and video to component SDI digital converter VS661-DAC Component SDI digital to composite analog audio and video converter. SFP optics sold separately VENTURA Converters and Embedders 1.1 VS905-ME-CO-FE* MPEG 2 Encoder NTSC + Audio to ASI/100BaseT Network Interfaces • NTSC composite input and output • Two independent channels of analog audio or four AES/EBU** • Buffered front panel monitor for NTSC input • Video and audio gain and cable EQ adjustments • Supports 2 channels of locally embedded audio • 10/100 Base-T network interface • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:0 support with transport streams of up to 10Mbps • I, B, B, P GOP for 4:2:0 profile. Simple GOP structure configuration through element management GUI** • AC and DC power options with optional redundancy • Compatible with SMPTE 2022, FEC included • Compatible with FCS183-AEMS Advanced Element Management System * Scheduled availability Q3 2008 ** Planned versions for future release VS905-ME-CO-FE* MPEG Encoder/Network Interface ** Operation The VS905-ME-CO-FE MPEG-2 encoder product is designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC and analog audio are widely used. The VS905ME-CO-FE can be configured at any desired quality level with full MP at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI and Ethernet network interfaces the service provider can use the equipment directly in most applications. 2 2 ** Element Management Compression Video Format MPEG-2 (ISO/IEC 13 818-2) Profile MP at ML GOP I, B, B, P Bit rate From 1Mbps to 10Mbps Delay <140ms Audio Format Bit rate MPEG-1 Layer II (ISO/IEC 11172-3) From 64 to 384Kbps Encoder Inputs – Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq NTSC (ITU R-BT 470.RS250-C) 1 75 Ohm 1Vpp >5MHz >62dB >100m Other Vertical Blanking Interval (VBI) transport is fully supported by stripping the VBI lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal. An SDI pattern generator is also built into the encoder and can be switched into the processing chain ahead of the compression engine, thereby providing end-to-end quality testing of the entire compression, transport and decompression process. LED Indicators Loss of audio 1 Loss of audio 2 Loss of video Loss of Ethernet activity Power supply Alarms Loss of video Loss of audio 1 Loss of audio 2 Controls/Status Audio/video encoder parameters Transmission protocol/network settings Test pattern generator VBI configuration Encoder Inputs – Audio Analog Number of inputs Up to 2 independent channels Connector type Phoenix 3-pin Impedance 600 Ohm or Hi-Z S/N (TX to RX) > 80dB rms, > 62dB Other An on-board tone generator is also present that can be enabled for link and audio processing verification. Network Interfaces Encoder Formats ASI EN 50083-9 10/100BaseT UDP/RTP, Unicast and Multicast Management and Control Physical and Environmental Power consumption <12 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to 85 ˚C C Relative humidity 5% to 85% Agency compliance Safety NEBS Level 3, UL, CSA, CE EMC FCC Part 15 Class A, CE EMC directive Ordering Information VS905-ME-CO-FE – ENC Encoder network-electronics.com | 39 VENTURA 1.1 Converters and Embedders TV-C PLUS-ENC MPEG 2 Encoder NTSC/PAL/SDI + Audio to ASI/DS3/100BaseT Network Interfaces • NTSC/PAL composite or SDI inputs and outputs • Eight independent channels of analog audio or four AES/EBU • Video and audio gain and cable EQ adjust at all analog I/Os • Supports pre-embedded or locally embedded audio • DVB-ASI, DS3 and 10/100 Base-T interfaces • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:2 P at ML with transport stream of up to 50Mbps • 4:2:0 support with transport streams of up to 25Mbps • Simple GOP structure configuration through element management GUI • Intuitive front panel, easy-to-navigate LCD menu with push button controls • AC and DC power options with optional redundancy 40 | network-electronics.com VENTURA Converters and Embedders 1.1 TV-C PLUS-ENC Operation Encoder Inputs – Audio The TV-C PLUS MPEG-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC/PAL and analog audio and SDI and AES are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-C PLUS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at ML and 4:2:2 P at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI, Ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications. Compression/De-Compression Video Format MPEG-2 (ISO/IEC 13 818-2) Profile 422P at ML or MP at ML GOP Adjustable Bit rate From 1,5Mbps to 50Mbps Delay <140ms Audio Format Mode Bit rate MPEG-1 Layer II (ISO/IEC 11172-3) Stereo, Joint Stereo, Mono, Dual Mono From 64 to 384Kbps Encoder Inputs – Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m Digital Format Cable Eq SDI 4:2:2 (625/625) (ITU-R 656) >250m Belden 8281 Other Vertical Blanking Interval (VBI) transport is fully supported by stripping the VBI lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal. An SDI pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process. Analog Number of inputs Up to 8 independent channels Connector type Phoenix 3-pin Impedance 600 ohm or Hi-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz Other Audio may also be carried pre-embedded in the SDI stream. If configured to do so, this audio will be de-embedded and processed by the encoder. An on-board tone generator is also present that can be enabled for link and audio processing verification. Network Interfaces Encoder/Decoder Formats ASI EN 50083-9 E3 G.751 DS-3 G.751, C-Bit Parity or M-Frame* 10/100BaseT UDP/RTP, Unicast and Multicast Management and Control Both encoder and decoder can be configured via front panel push buttons and LCD display. The main status, control and alarm interfaces are through an RS-232 port and an RJ-45 10 BaseT port on the rear panel of each unit. Physical and Environmental The TV-C PLUS is fitted with both AC plus DC power supplies. Redundancy is enhanced through unique cross coupling of DC inputs and outputs when two or more units are present. Power consumption <25 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to +85 ˚C Relative humidity 5% to 85% Agency compliance Safety UL, CSA, CE Low Voltage Directive EMC FCC Part 15 Class A, CE EMC Directive Ordering Information VPG TV-C PLUS – ENC Encoder network-electronics.com | 41 VENTURA 1.1 Converters and Embedders TV-C PLUS-DEC MPEG 2 Decoder NTSC/PAL/SDI + Audio to ASI/DS3/100BaseT Network Interfaces • NTSC/PAL Composite or SDI inputs and outputs • Eight independent channels of Analog audio or four AES/EBU • Video and audio gain and cable eq adjust at all analog I/O’s • Pre-embedded or locally embedded audio supported • DVB-ASI, DS3 and 10/100 Base-T interfaces • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:2 P at ML with transport stream of up to 50Mbps • 4:2:0 support with transport streams of up to 25Mbps • Simple, GOP structure configuration through element management GUI • Intuitive front panel easy to navigate LCD menu with push button controls • Simple front-panel display/menu/selection • AC and DC power options with optional redundancy 42 | network-electronics.com VENTURA Converters and Embedders 1.1 TV-C PLUS-DEC Operation Decode Outputs – Audio The TV-C PLUS MPEG-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC/PAL and analog audio and SDI and AES are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-C PLUS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at ML and 4:2:2 P at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI, Ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications. Compression/De-Compression Video Format Profile MPEG-2 (ISO/IEC 13 818-2) 422P at ML or MP at ML GOP Adjustable Bit rate From 1.5Mbps to 50Mbps Delay <140ms Audio Format Mode Bit rate MPEG-1 Layer II (ISO/IEC 11172-3) Stereo, Joint Stereo, Mono, Dual Mono From 64 to 384Kbps Decoder Outputs-Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m Digital Format SDI 4:2:2 (625/625) (ITU-R 656) Analog Number of outputs Up to 8 independent channels Connector type Phoenix 3-piin Impedance 600 ohm or Lo-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz Network Interfaces Encoder/Decoder Formats ASI EN 50083-9 E3 G.751 DS-3 G.751, C-Bit Parity or M-Frame* 10/100BaseT UDP/RTP, Unicast and Multicast Management and Control Both encoder and decoder can be configured via front panel push buttons and LCD display. The main status, control and alarm interfaces are through an RS-232 port and an RJ-45 10 BaseT port on the rear panel of each unit. Physical and Environmental The TV-C PLUS is fitted with both AC plus DC power supplies. Redundancy is enhanced through unique cross coupling of DC inputs and outputs when two or more units are present. Power consumption <25 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to + 85 ˚C Relative humidity 5% to 85% Agency compliance Safety UL, CSA, CE Low Voltage Directive EMC FCC Part 15 Class A, CE EMC Directive Ordering Information VPG TV-C PLUS – DEC Decoder network-electronics.com | 43 VENTURA 1.1 Single Channel Fiber VS201 SDI/ASI/310M Fiber Optic Transport • SDI, SDTI, ATSC and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of video, loss of input, laser failure and DC power LEDs • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Digital video element management Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) 19.392Mbps (SMPTE-310M) DVB-ASI (EN50083-9) # of Inputs 1 (VS201-EO) # of Outputs 2 (VS201-OE) Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode LED indicators VS201-EO VS201-OE Laser failure Loss of video Loss of video Loss of input Mute (laser disabled) Bypass DC power DC power external alarms N/C relay contact outputs for major and minor alarm signals. 44 | network-electronics.com Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of input Loss of video (VS201-OE) Laser transmitter failure (VS201-EO) Status Transmitter enabled/disabled (VS201-EO) SFP transmitter wavelength (VS201-EO) SFP transmitter output power (VS201-EO) SFP receiver input power (VS201-EO) Data rate (VS201-OE) Bypass enabled/disabled (VS201-OE) Model and serial number Controls Laser transmitter enable/disable (VS201-EO) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V Power Consumption 3W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS201-EO Transmitter card-SDI/ASI E/O VS201-OE Receiver card-SDI/ASI O/E with SFP-RV-PIN receiver card installed SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C Video 270/1500Mbps, TX, Non-CWDM FP Video 270/1500Mbps, TX, Non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM VENTURA Single Channel Fiber 1.1 VS231 SDI/ASI 270Mbps Fiber Optic Transport with Jitter Management • SDI, SDTI and DVB-ASI compatible with automatic input signal detection • Removes timing and alignment jitter from the SDI signal • Tolerates multiple cascades through a facility • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Default SDI keep-alive signal • Loss of video, EDH, SDI video present, loss of input LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Digital video Physical and Environmental Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281 element management Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 6W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode LED indicators VS231-EO VS231-OE Laser failure Loss of video Loss of video Loss of input EDH errors detected EDH errors detected SDI video present SDI video present Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of input Loss of video Video errors Laser transmitter failure (VS231-EO) Optical low light (VS231-OE) VS231-EO uplink transmitter alarms (VS231-OE) Status DVB-ASI detected SDI detected Default SDI output enabled/disabled Incoming embedded audio detected VS231-EO uplink transmitter status (VS231-OE) SFP wavelength SFP output power SFP receiver input power Model and serial number Controls ID setting for the VS231 (0-65535) Force to ASI mode enable/disable Default pattern Laser transmitter enable/disable (VS231-EO) Optical/electrical receiver input mode (VS231-OE) Ordering Options VS231-EO VS231-OE Transmitter card PINFET receiver SFP Options SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-PIN network-electronics.com | 45 VENTURA 1.1 Single Channel Fiber VS231-OO SDI/ASI 270Mbps Fiber Optic Regenerator with Jitter Management • SDI, SDTI and DVB-ASI compatible with automatic input signal detection • Removes timing and alignment jitter from the SDI signal • Tolerates multiple cascades through a facility • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Default SDI keep-alive signal • Loss of video, EDH, SDI video present, loss of input LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Digital video element management Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode LED indicators Laser failure Loss of video Loss of input EDH errors detected SDI video present 46 | network-electronics.com Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of input Loss of video Video errors Laser transmitter failure Optical low light Uplink transmitter alarms Status DVB-ASI detected SDI detected Default SDI output enabled/disabled SFP transmitter wavelength SFP transmitter output power SFP receiver input power Incoming embedded audio detected Uplink transmitter status Model and serial number Controls Force to ASI mode enable/disable Laser transmitter enable/disable Optical/electrical receiver input mode Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 6W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS231-OO Optical regenerator VENTURA Single Channel Fiber 1.1 VS501 SDI/ASI 270Mbps Audio Embedder/De-Embedder and Fiber Optic Transport • SDI, SDTI and DVB-ASI compatible • Removes timing and alignment jitter from the SDI signal • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Embeds up to four channels of analog audio or two channels of AES digital audio, or mix of both • Asynchronous or synchronous 48Khz audio with 20-bit audio resolution • Default SDI keep-alive signal • AES audio present, analog audio present, SDI video present, ASI video present, laser fail, DC power, EDH, loss of input and loss of audio LEDs • Inband element management • Automatic cable equalization up to 300m for Belden 8281 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS501-EO SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) Analog Audio VS501-OE 270Mbps 270Mbps 270Mbps 270Mbps Network 270Mbps SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) CH1 (L1) CH2 (R1) CH3 (L2) CH3 (L2) CH4 (R2) CH4 (R2) AES1 AES1 AES2 AES2 Digital video Analog Audio Digital Audio LED indicators Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 # of Outputs 2 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 digital Audio Standards AES/EBU (SMPTE-272M) # of Inputs 2 (VS501-EO) # of Outputs 2 (VS501-OE) Connector BNC (unbalanced) 3-pin terminal (balanced) Note: see VS312 data sheet for more detailed specifications analog audio Standards exceeds RS250C short haul specs # of Inputs 4(VS501-EO) # of Outputs 4 (VS501-OE) Connector 3-pin terminal Note: see VS312 data sheet for more detailed specifications Optical transmitter 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type PIN Rcv’r CH2 (R1) Digital Audio # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 1310/1550/CWDM 270Mbps 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode VS501-EO Note: same as the VS312 VS501-OE element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Note: same as the VS312 plus the following: Alarms Laser transmitter failure (VS501-EO) Optical low light (VS501-OE) VS501-EO uplink transmitter alarms (VS501-OE) Status VS501-EO uplink transmitter status (VS501-OE) Model and serial number Laser wavelength Laser power SFP receiver installed Optical receiver installed Controls Laser transmitter enable/disable (VS501-EO) Electrical/optical receiver input mode (VS501-OE) SDI pattern enable ID setting for the VS501 (0-65535) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS501-EO VS501-OE Transmitter card PINFET receiver SFP Options SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-PIN network-electronics.com | 47 VENTURA 1.1 Single Channel Fiber VS551 Composite Analog Video and Audio to SDTI 270Mbps w/Fiber Optic Transport • Converts NTSC/PAL analog video to SDTI for transport over a 270Mbps network Analog Video • Embeds up to four channels of analog audio (NTSC/PAL) • 12-bit video quantization, 20-bit audio quantization • Unintrusive audio monitoring and level adjustment CH1 (L1) • Composite test pattern generator Analog CH2 (R1) Audio CH3 (L2) • Loss of input, loss of video, EDH, loss of audio LEDs CH4 (R2) • Optical (optional) and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Analog video VS551-DAC Analog Video (NTSC/PAL) 1310/1550/CWDM 270Mbps SDTI (SMPTE-305M) 270Mbps Network 270Mbps SDTI (SMPTE-305M) CH1 (L1) CH2 (R1) CH3 (L2) Analog Audio CH4 (R2) optical receiver (optional) Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of Inputs 1 (VS551-ADC) # of Outputs 1 (VS551-DAC) Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential Gain <2% (NTSC), <1% (PAL) Differential Phase <0.7° (NTSC), <0.5° (PAL) Digital video Standards SDTI (SMPTE-305M) # of Inputs 1 (VS551-DAC) # of Outputs 1 (VS551-ADC) Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281 analog audio Standards Exceeds RS250C short haul specs # of Inputs 4 (VS551-ADC) # of Outputs 4 (VS551-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling Rate 48 KHz Quantization 20-bit SNR Unweighted -90dBFS Frequency Response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0dBFS) IMD <0.05% SMPTE @ +2dBu Crosstalk Between Ch. 95dB Input/Output Level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohm) Optical transmitter (optional) # of Outputs Connector Laser Type Laser Wavelengths 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM Output Power Level -0.5dBm min (1310 and 1550) -0.5dBm min (CWDM) Single mode Fiber Type VS551-ADC # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type LED indicators VS551-ADC VS551-DAC Loss of audio for each ch. Loss of audio for each channel Loss of video (VID) Loss of video (VID) EDH EDH DC power Loss of input (LOI) Loss of frame (LOF) DC power element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of audio 1-4 Loss of video Status SFP present SFP transmitter wavelength SFP power level Controls Laser transmitter enable/disable Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS551-ADC-SFP Analog to digital converter w/audio embedder (SFP cage included) SFP Sold Separately SFP-TV-1310-SF SFP-TV-1490-C SFP-TV-1530-C SFP-TV-1550-SD SFP-TV-1610-C VS551-DAC-SFP SFP Sold Separately SFP-RV-PIN 48 | network-electronics.com 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode SFP-TV-1470-C SFP-TV-1510-C SFP-TV-1550-C SFP-TV-1590-C Digital to analog converter w/audio deembedder (SFP cage included) VENTURA Single Channel Fiber 1.1 VS551-D-ADC-SFP Transmitter – Universal Analog & Digital Video/Audio Adapter for Fiber Optic Transport • Automatically detects video input format • Converts NTSC/PAL/PAL-M Video and ATSC, SD-SDI, HD-SDI and DVB-ASI inputs to SDTI/SDI and optical output for transport over 270Mbps network • Handles 525/625 SD-SDI and 1.4835/1.485Gbps HD-SDI • Composite test pattern generator • Converts up to four channels of analog audio to AES • Dolby E – compatible • Non-intrusive audio monitoring and level adjustment • Embeds AES converted from analog audio or direct-fed AES into SDTI, SD-SDI or HD-SDI • Warning LEDs for loss of video, loss of audio, CRC/EDH • Small Form-factor Pluggable (SFP) optics available in 1310, 1550, and any ITU CWDM or DWDM wavelength • Engineered to meet NEBS Level 3 requirements • Compatible with FCS183 AEMS and EMS element managers Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm Signal level Unbalanced 1.2 Vp-p Balanced 1 to 7 Vp-p Resolution Supports up to 24 bits Sample rates 32kHz, 44kHz, 48kHz sample rates converted to 48kHz optical TRANSMITTER Digital video Standards SDTI (SMPTE-305M), SDI (SMPTE-259M), HD-SDI (SMPTE-292M), DVB-ASI (EN50083-9), ATSC (SMPTE-310M) # of inputs 1 # of outputs 2 electrical, 1 optical Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard analog audio Standards Exceeds RS250C short haul specs # of inputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted -90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 ohms) # of outputs Connector Laser type Laser wavelengths Output power level Fiber type 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 & 1550) -0.5dBm min (CWDM) Single mode LED indicators Video mode HD/SD/ASI Loss of input CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Ordering Options VS551-D-ADC-SFP Analog to digital converter with audio embedder (SFP cage Included, SFP sold separately) For optical interface options, see Ventura SFP Index data sheet. network-electronics.com | 49 VENTURA 1.1 Single Channel Fiber VS551-D-DAC-SFP Receiver – Universal Analog and Digital Video and Audio Adapter for Fiber Optic Transport • Receives all SD-SDI, HD-SDI, ASI and ATSC optically and electrically • De-embeds four channels of audio from SD-SDI and HD-SDI and provides AES and analog outputs • Dolby E – compatible • Converts SDTI to NTSC/PAL/PAL-M • Non-intrusive analog audio monitoring and level adjustment • Loss of input, loss of video, EDH/CRC, loss of audio LEDs • Remote loss of video and loss of audio LEDs • Small Formfactor Pluggable (SFP) optics with APD receiver for optimum sensitivity • Engineered to meet NEBS Level 3 requirements • Compatible with the FCS183 comprehensive element management system that provides remote status, alarms and configurations via SNMP and Ethernet Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) Digital video Standards SDTI (SMPTE-305M) SDI (SMPTE-259M) HD-SDI (SMPTE-292M) DVB-ASI (EN50083-9) ATSC (SMPTE-310M) # of inputs 1 optical (see optical spec), 1 electrical # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard analog audio Standards Exceeds RS250C short haul specs # of outputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48KHz Quantization 20-bit SNR unweighted -90dBFS Frequency response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, at 0dBFS) IMD <0.05% SMPTE at +2 dBu Crosstalk between channels 95dB Input/output level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohms) 50 | network-electronics.com DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm, unbalanced Signal level Unbalanced 1.2Vp-p Balanced 1 to 7Vp-p Resolution Supports up to 24 bits optical RECEIVER # of inputs Connector Receiver type Input wavelengths Sensitivity Max input power Fiber type 1 SC/PC SFP - APD 1260nm - 1620nm ≤-34dBm –8dBm (+7dBm with 15dB attenuator) Single mode LED indicators Video Mode HD/SD/ASI Loss of input (local and remote) CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 (local and remote) element management Compatible with the FCS183 Comprehensive Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Ordering Options VS551-D-DAC-SFP Universal analog and digital video and audio fiber receiver VENTURA Single Channel Fiber 1.1 VS591-SFP-SFP Dual E4 Transposer • Configurable system for regenerating, transposing and transporting E4 signals • Designed to transport E4 139.264Mbps CMI encoded signals • Meets ITU-T recommendations for E4 • Two independent channels per card • Removes timing and alignment jitter from the SDI signals at the output • Jitter mask uses ITU-T recommendations G.823 • Loss of video, loss of optical input, laser failure LEDs • Automatic cable equalization better than 250m for Belden 8281 • Selectable test pattern generator for each channel • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths VS591 Transposer Block Diagram • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Digital video element management Standards ITU recommendations G.703 for E4 physical interface G.751 for E4 framing G.823 for jitter performance Electrical inputs 1 per channel Electrical outputs 2 (E4, reclocked and AC coupled) per channel Monitors 1 front panel BNC Connectors BNCs on rear connector panel Impedance 75 Ohm Data rate 139.264Mbps (278.528 M band) Equalization Better than 250m at 140Mbps for Belden 8281 Physical and Environmental Optical transmitter # of outputs Connector Data rate Laser type Laser wavelengths Output power level Fiber type 1 per channel SC/PC 139.264Mbps SFP 1310nm, 1550nm, CWDM, DWDM –1dBm min Single mode LED indicators DC power Loss of input Valid E4 present Channel present Laser failure CRC errors/AIS detected Resides in a single slot of a VS101 or VS103 Ventura series chassis Power consumption 7W Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options optical receiver # of inputs Connector Receiver type Input wavelengths Sensitivity Fiber type Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of optical input Loss of video E4 errors detected Status Model and serial number Transmitter power level SFP laser transmitter wavelength SFP receiver installed Receiver power level Controls Laser transmitter enable/disable Pattern generator enable (PRBS with CRC check) 1 per channel SC/PC PIN 1260nm - 1620nm ≤–32dBm Single mode VS591-SFP-SFP Dual E4 transposer and protection switch SFP Options SFP-TRV-1310-S SFP-TRV-1550-S SFP-TRV-1470-C SFP-TRV-1490-C SFP-TRV-1510-C SFP-TRV-1530-C SFP-TRV-1550-C SFP-TRV-1570-C SFP-TRV-1590-C SFP-TRV-1610-C SFP-RV-PIN 1310nm laser with PIN receiver 1550nm laser with PIN receiver 1470nm CWDM laser with PIN receiver 1490nm CWDM laser with PIN receiver 1510nm CWDM laser with PIN receiver 1530nm CWDM laser with PIN receiver 1550nm CWDM laser with PIN receiver 1570nm CWDM laser with PIN receiver 1590nm CWDM laser with PIN receiver 1610nm CWDM laser with PIN receiver PIN receiver network-electronics.com | 51 VENTURA 1.1 Single Channel Fiber VS621 Analog to SDTI Video/Data Converter • Emulates the functions of the PCO5000 fiber link • Accommodates both video and data inputs • Converts composite video signal or wideband 12MHz analog bandwidth into a SMPTE 305M SDTI stream • More than 30dB optical link budget; low noise, high linearity conversion • LED indicators and external alarm contacts for video, data and optics • Balanced and unbalanced inputs and outputs • Front panel buffered monitor outputs • Front panel level (or gain) and cable equalization adjustments • 3Vpp/50 ohm version available • NEBS Level 3 compliant • SFP optics supporting all standard and CWDM applications General SDI Electrical interface parameters Input signal types No. of channels/chassis Wideband mode spec. NTSC, wideband 12 MHz analog passband 10 NASA: 79K33043 Specification of Wideband Fiber Optic Terminal Equipment Video mode specifications RS-250C Short Haul (video mode) Framing SMPTE 305M / SMPTE 259M VS621-ADC Input interface Input levels Input impedance Return loss Common mode rejection Cable equalizer max 1 Vpp*, nominal ± 3dB (adjustable) 75 ohm* unbalanced (loop-through) or 124 ohm balanced (user-selectable) >40dB, 0–5 MHz >30dB, 0–10 MHz >70dB at 60Hz 130m, up to 12MHz (Belden 8281) Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000TX VS621-DAC output interface Output levels Output impedance Rear panel Front panel 1 Vpp*, nominal ± 3dB (adjustable) Dual 75 ohm* unbalanced or 124 ohm balanced (user-selectable) 75 ohm unbalanced, flat, pre-equalized monitor port >40dB, 0–5 MHz >60dB, 0–5 MHz 130m, up to 12MHz Return loss Module-to-Module isolation Cable equalizer max. Ith Equalization frequency response error ± 0.1dB perdB of cable loss *Configured for 3Vpp/50 ohm as VS-3V-PCO5000RX Optical interface parameters # of Outputs # of Inputs Connector Laser Type Laser Wavelength Output Power Level–ADC Sensitivity–DAC Fiber Type 1 (VS621-ADC) 1 (VS621-DAC) SC/PC SFP 1310nm, 1550nm, CWDM, DWDM (please contact us for DWDM optics) -0.5dBm min -34dBm Single mode System frequency response Video Mode Analog/Digital Mode ± 0.15dB, 10Hz–5MHz ± 0.35dB, 10Hz–8MHz ± 0/-3dB, 8MHz–12MHz 52 | network-electronics.com Physical Interface SMPTE 259M Format SMPTE 305M Coax Drive Up to 300m (Belden 8281) Cable EQ Up to 300m (Belden 8281) General Video Performance Specifications Gain Inequality Delay Inequality Intermodulation Chroma non-linear gain distortion Chroma non-linear phase distortion Luminance non-linearity Differential Gain Differential Phase Transient non-linearity Dynamic Gain of Picture Signal Signal to Low Frequency Noise pp Luminance Signal-to-weighted RMS Noise Signal-to-Periodic Noise Signal-to-Impulse Noise ± 1 IRE ± 10ns <1% for 50% APL <0.5% for 50% APL <0.5° for 50% APL <2% <1% <0.5° <1% <1% >53dB >68dB >67dB >65dB Analog/Data Signal distortions Total harmonic distortion Signal-to-noise ratio Peak-to-peak jitter Overshoot Bit Error Rate >40dB below 1 Vpp sinewave >50dB at -27dBm receiver optical power, 1 Vpp signal to 12MHz band-limited noise <5% up to 4Mbps, tested with 1 Vpp NRZ signal and 215 -1 pseudo-random bit sequence <10% <1 x 10-9, 1kbps to 4Mbps PHYSICAL AND ENVIRONMENTAL Temperature range Power requirements 0-50 °C ambient <7W Ordering Options VS621-PCO5000TX Analog to digital VS621-PCO5000RX Digital to analog VS621-3V-PCO5000TX Analog to digital (3Vpp/50 ohm) VS621-3V-PCO5000RX Digital to analog (3Vpp/50 ohm) VENTURA Single Channel Fiber 1.1 VS661 Composite Analog Audio and Video to Component SDI 270Mbps Converter w/Fiber Optic Transport • Embeds up to four channels of analog audio • 20-bit audio quantization • Passes SMPTE-259M 270Mbps SDI pathological sequence test • Meets US telco TV-1 service specifications (GR-338-CORE) • Exceeds RS250C short haul specifications • Proprietary selectable comb/bandsplit filtering for top quality dynamic performance • Automatic cable equalization up to 300m for Belden 8281 • Front panel monitor and calibration adjustments • User-definable alarms based on priority • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 and any ITU CWDM or DWDM wavelengths • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet VS661-ADC VS661-DAC Analog Video (NTSC/PAL) Analog Video (NTSC/PAL) Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 (VS661-ADC) # of outputs 2 (VS661-DAC) Monitors 1 (VS661-ADC) Connector BNC Impedance 75 Ohm Quantization 10-bit Equalization Up to 150m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) Digital video Standards SDI (SMPTE-259M) # of inputs 1 (VS661-DAC) # of outputs 2 (VS661-ADC) Connector BNC Impedance 75 Ohm Data rate 270Mbps Equalization Up to 300m w/Belden 8281 analog audio Standards Exceeds RS250C short haul specs # of inputs 4 (VS661-ADC) # of outputs 4 (VS661-DAC) Connector 3-pin terminal Impedance Hi-Z or 600 Ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted –90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 Ohm) OPTICAL CHARACTERISTICS # of Outputs # of Inputs Connector Laser type Laser wavelength Output power level – ADC Sensitivity - DAC Fiber type 1 (VS661-ADC) 1 (VS661-DAC) SC/PC SFP 1310nm, 1550 nm, CWDM, DWDM (please contact us for DWDM optics) -0.5 dBm min -34dBm Single mode SDI Analog Audio 270Mbps Network SDI CH1 (L1) CH1 (L1) CH2 (R1) CH2 (R1) CH3 (L2) CH3 (L2) CH4 (R2) CH4 (R2) Analog Audio LED indicators VS661 – ADC Minor alarm (MIN) LED (red) Loss of composite video input, loss of SDI video output, or loss of audio Major alarm (MAJ) LED (red) board failure or communication failure Input present (VID) LED (green) composite video input present Power OK (DC) LED (green) power supply ok Audio channel 1 (AUD1) LED (yellow) ON with alarm, normally OFF Audio channel 2 (AUD2) LED (yellow) ON with alarm, normally OFF Audio channel 3 (AUD3) LED (yellow) ON with alarm, normally OFF Audio channel 4 (AUD4) LED (yellow) ON with alarm, normally OFF VS661 – DAC Input present (SDI) LED (red) SDI video present Audio group (AUD) LED (yellow) Audio group present Power (+5V) LED (green) +5V DC power present Alarm (ALM) LED (yellow) flashes with alarm, normally OFF Set-up and alignment 10 character alphanumeric display Element management Compatible with FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. PHYSICAL AND ENVIRONMENTAL Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 7W max Operating temperature 0 ˚C to 50 ˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Relative humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS661-ADC Composite analog audio and video to component SDI digital converter VS661-DAC Component SDI digital to composite analog audio and video converter. SFP optics sold separately network-electronics.com | 53 VENTURA 1.1 High Definition VS251 HD-SDI, SDI, SDTI, ATSC and ASI Fiber Optic Transport • HD-SDI, SDI, SDTI , ATSC and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of input, loss of video, laser failure and DC power LEDs • External major and minor relay contact closure alarms • Automatic cable equalization up to 120m with Belden 1694 • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet Digital video element management Standards HDSDI (SMPTE-292M) SDI (SMPTE-259M) SDTI (SMPTE-305M) 19.392Mbps (SMPTE-310M) DVB-ASI (EN50083-9) # of Inputs 1 (VS251-EO) # of Outputs 2 (VS251-OE) Connector BNC Impedance 75 ohm Data Rate Up to 1.485 Gbps Equalization Up to 120m w/Belden 1694 Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 1 SC/PC Video SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode optical receiver # of Inputs 1 Connector SC/PC Receiver Type APD Pigtail Input Wavelengths 1260nm–1620nm Sensitivity ≤–32dBm Max Input Power –8dBm Fiber Type Single mode LED indicators VS251-EO VS251-OE Laser failure Loss of video Loss of video Loss of input Mute (laser disabled) Bypass DC power DC power external alarms N/C relay contact outputs for major and minor alarm signals. 54 | network-electronics.com Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of input Loss of video (VS251-OE) Laser transmitter failure (VS251-EO) Status Transmitter enabled/disabled (VS251-EO) SFP transmitter wavelength (VS251-EO) Data rate (VS251-OE) Bypass enabled/disabled (VS251-OE) SFP transmitter panel level SFP receiver panel Model and serial number Controls Laser transmitter enable/disable (VS251-EO) Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +5V, Power Consumption 3W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS251-1310-EO 1310nm laser VS251-1550-EO-S 1550nm laser VS251-1470-EO-C 1470nm CWDM laser VS251-1490-EO-C 1490nm CWDM laser VS251-1510-EO-C 1510nm CWDM laser VS251-1530-EO-C 1530nm CWDM laser VS251-1550-EO-C 1550nm CWDM laser VS251-1570-EO-C 1570nm CWDM laser VS251-1590-EO-C 1590nm CWDM laser VS251-1610-EO-C 1610nm CWDM laser VS251-OE APD receiver VENTURA High Definition 1.1 VS251-SFP HD-SDI/SDI/SDTI/ASI/ATSC Fiber Optic TX/RX/TRX • 10Mbps to 1.5Gbps with jitter managed and non-jitter managed modes • Jitter management at 1.485Gbps HD, 1.4835Gbps HD and 270Mbps SDI/ SDTI/ASI, other rates supported in bypass mode • SFP optical interfaces supporting 1310nm, 1550nm, CWDM and DWDM • Minimum of 32dB optical dynamic range • SFP optics allow for optimum sparing; card is configurable as E-O, O-E and O-O repeater or wavelength shifter HD-SDI SDI/ASI • Full CRC and EDH checking in HD-SDI and SDI modes • Built in HD-SDI test signal generator for remote network testing • Transports all HD and SD pathological patterns without additional scrambling at 1310/2550nm and CWDM • Additional scrambling for DWDM applications • SNMP and Web browser supported under Ventura AEMS management • NEBS Level 3 compliant Driver Opt RX HD-SDI Laser SDI/ASI EDH/CRC Count HD-SDI SDI/ASI Cab EQ OR Jitter Buffer EDH/CRC Reset Driver HD-SDI SDI/ASI LSB Dither HD-SDI Generator Operation Video Inputs HD-SDI SMPTE 292M SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9 Jitter Performance Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs. Standard Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192 Electrical Input Number of Inputs Connector Type Return Loss Equalization 1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps Electrical Outputs Number of Outputs Connector Type 2 Jitter managed 75 ohm BNC Optical Input Number of Inputs Connector Type Wavelength Range Sensitivity Level Overload Level HD-SDI SDI/ASI Optical Output This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater. The unique design provides full jitter management of all HD/SD rates. 1310/1550nm wavelengths as well as the sixteen CWDM wavelengths are supported using a comprehensive range of VPG-provided SFP optical modules. SFP DWDM is supported by enabling additional scrambling that allows SMPTE pathological patterns to pass error-free through all DWDM network elements. Element management provides detailed analysis of signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or on-board switches. The card is ideal for difficult telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class long-reach optics and jitter management techniques unique to VPG equipment designs. Standards Driver 1 SC/PC 1270 – 1610nm –32dBm (worst case) –8dBm (worst case) Number of Outputs Connector Type Wavelengths Power Out 1 SC/PC 1310/1550nm, CWDM DWDM with LSB scrambling 0dBm min, +1dBm typical Front Panel LED Indicators There is a row of nine LEDs comprehensively signaling the status and alarm conditions of the card. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual. External Alarms N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use. Element Management The VS251-SFP is compatible with the standard FCS183 and the FCS183AEMS Advanced Element Management System. Both management systems are Web browser and SNMP enabled. The FCS183 provides the simplest Web interface with SNMP supported limited to major and minor predefined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card. Physical and Environmental Requires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis. Power Consumption <7W Operating Temp 0 ˚C to 50 ˚C ambient Storage Temp –40 ˚C to 85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS level 3 Safety UL, CSA, CE low voltage directive EMC FCC Part 15 Class A, CE EMC directive Ordering Information VS251-SFP (1310/1550nm and CWDM applications) “SFP” represents locations for small form factor pluggable (SFP) optical devices. Use of one of the VPG SFP-TV or SFP-TRV family of high performance video SFPs covering 1310/1550nm and CWDM wavelengths with both PIN and APD receiver options. Please see the VPG SFP Selection Guide for further details. SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the VPG SFP Selection Guide for further details. network-electronics.com | 55 VENTURA 1.1 High Definition VS252-SFP-SFP HD-SDI/SDI/SDTI/ASI/ATSC Dual Channel Fiber Optic TX/RX/TRX/Switch* HD-SDI SDI/ASI Opt RX Driver Laser Driver HD-SDI SDI/ASI Driver HD-SDI SDI/ASI Driver HD-SDI SDI/ASI Driver HD-SDI SDI/ASI Driver Laser HD-SDI SDI/ASI EDH/CRC Count HD-SDI SDI/ASI Cab EQ OR Jitter Buffer EDH/CRC Reset LSB Dither HD-SDI Generator NMS 2x2 Switch* EDH/CRC Count HD-SDI SDI/ASI Cab EQ HD-SDI SDI/ASI Opt RX OR Jitter Buffer EDH/CRC Reset LSB Dither The VS252 is a multifunction optical interface card in the High-Definition group of the Ventura™ product line. The card is dual-channel and supports TS bit rates from 10Mbps through 1.5Gbps. It can be operated in various modes providing optical transport, protection and monitoring of HD-SDI, SDI, ASI and SMPTE-310 video. • 10Mbps to 1.5Gbps with jitter management and non-jitter management modes • Jitter management at 1.485Gbps HD, 1.4835Gpbs HD and 270Mpbs SDI/ SDTI/ASI • Other rates supported in non-jitter management (bypass) mode • SFP optical interfaces supporting 1310nm, 1550nm, CWDM and DWDM • Minimum of 32dB optical dynamic range • Simplified single card holds spares configurable for E-O, O-E and O-O repeater, wavelength shifter or switch* with any wavelength • Full CRC and EDH checking in HD-SDI and SDI modes • Built-in HD-SDI test signal generator for remote network testing • Transports all HD and SD pathological patterns without additional scrambling at 1310/1550nm and CWDM • SNMP and Web browser supported under Ventura AEMS element management • NEBS Level 3 compliant 56 | network-electronics.com HD-SDI SDI/ASI VENTURA High Definition 1.1 VS252-SFP-SFP Operation Optical Output (Each Channel) This powerful HD/SD processor can be configured to provide electrical to optical, optical to electrical interfacing or as an optical to optical repeater and/or wavelength shifter. With two fully independent channels the card can also operate as an HD/SD transceiver, a 2x2 changeover switch or an automatic HD/SD protection switch in either the electrical or optical domain. The unique design provides full jitter management of all HD/SD rates. 1310/1550nm wavelengths as well as the sixteen CWDM wavelengths are supported using a comprehensive range of VPG provided SFP optical modules. SFP DWDM is supported scrambling that allows SMPTE pathological patterns to pass error-free through all DWDM network elements. Element management provides detailed analysis of signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or through on-board switches. The card is ideal for different telco environments where both large losses and poor dispersion characteristics associated with legacy fiber plant are overcome with carrier class longreach optics and jitter management techniques unique to VPG equipment designs. Video Inputs Standards HD-SDI SMPTE 292M SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9 Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs, while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs. Standard Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192 Electrical Input (Each Channel) 1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps Electrical Outputs (Each Channel) Number of Outputs Connector Type 2 Jitter managed 75 ohm BNC Optical Input (Each Channel) Number of Inputs Connector Type Wavelength Range Sensitivity Level Overload Level Power Out 1 SC/PC 1310/1550nm, CWDM DWDM with LSB scrambling 0dBm min, +1dBm typical Front Panel LED Indicators There are two rows of nine LEDs comprehensively signaling the status and alarm conditions of each channel. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual. External Alarms N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use. Element Management The VS252 is compatible with the standard FCS183 and the FCS183AEMS (Advanced Element Management System). Both NM systems are Web browser and SNMP enabled. The FCS183 provides the simplest Web interface with SNMP support limited to major and minor pre-defined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card. Physical and Environmental Jitter Performance Number of Inputs Connector Type Return Loss Equalization Number of Outputs Connector Type Wavelengths 1 SC/PC 1270–1610nm -32dBm (worst case) –8dBm (worst case) Requires only one slot of either the VS103 ten-slot chassis or the VS101 three-slot chassis Power Consumption <10W Operating Temp 0 ˚C to 50 ˚C ambient Storage Temp –40 ˚C to 85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS Level 3 Safety UL, CSA, CE Low Voltage directive EMC FCC Part 15 Class A, CE EMC directive Ordering Information VS252-SFP-SFP (1310/1550nm and CWDM applications) VS252-SFPD-SFPD (DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices. The VS252 supports both standard and DWDM applications. However to use DWDM SFPs the VS252 must be ordered with a special adapter. This adapter may be field retrofitted or the VS252 can be returned to the factory for conversion to DWDM. Consult factory for details. SFP denotes use of one of the VPG SFP-TV or SFP-TRV family of high performance video SFPs covering 1310/1550nm and CWDM wavelengths with both PIN and APD receiver options. Please see the SFP Selection Guide for further details. SFPD denotes the use of DWDM SFPs. These devices are available as transceivers. Please see the SFP Selection Guide for further details. network-electronics.com | 57 VENTURA 1.1 High Definition VS254-E-SFP HD-SDI 4xAES Audio Embedder HD-SDI/SDI/SDTI/ASI/ATSC Fiber Optic Transmitter 4xAES Dolby-E/ AC-3 HD-SDI SDI/ASI Sample Rate Converters and Bypass AES RX OR Jitter Buffer Laser Driver HD-SDI SDI/ASI Driver HD-SDI SDI/ASI EDH/CRC Count EDH/CRC Reset Cab EQ Driver LSB Dither HD-SDI Generator The VS254-E-SFP is an HD-SDI audio embedder and optical transmit card in the VS25x group of High-Definition solutions. As well as embedding four AES audio channels it also supports Dolby-E and any AES framed data. The card can also be configured to transport bit rates from 10Mbps through 1.5Gbps through its SFP fiber interfaces. • Embeds up to four AES/EBU audio channels • Transparently handles any AES-framed data, such as Dolby-E • 10Mbps to 1.5Gbps with jitter managed and non-jitter managed modes • Jitter management at 1.485Gbps HD, 1.4835Gbps HD and 270Mbps SDI/ SDTI/ASI • Other rates supported in bypass mode • SFP optical interfaces supporting 1310nm, 1550nm, CWDM and DWDM • Minimum of 0dBm optical launch power • Simplified single card spares-holding, configurable EO to any wavelength by simple SFP change • Full CRC and EDH checking in HD-SDI and SDI modes • Built-in HD-SDI test signal generator for remote network testing • Transports all HD and SD pathological patterns without additional scrambling at 1310/1550nm and CWDM • SNMP and Web browser support under Ventura AEMS management • NEBS Level 3 compliant 58 | network-electronics.com HD-SDI SDI/ASI VENTURA High Definition 1.1 VS254-E-SFP Operation Inputs This powerful HD/AES processor embeds up to four synchronous or asynchronous AES channels into an HD-SDI video signal. All popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Disabling the sample rate converters allows the transparent carriage of Dolby-E or any AES-framed data. By adding an SFP, the card is readily transformed into a fiber optic network interface. Configurable additional scrambling allowing can be enabled allowing SMPTE pathological patterns to pass error-free through all DWDM network elements. Element management provides detailed analysis of video and audio signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or through on-board switches. Number of Inputs Connector Type A (A, B are Options) B Sampling Rage Level A B 4 110 ohm, Bal, 3-pin Phoenix 75 ohm, Unbalanced 48kHz 1Vp-p +/- 10% 0.5 to 10V p-p Front Panel LED Indicators A row of nine LEDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual. Video Inputs External Alarms Standards HD-SDI SMPTE 292M 1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94 SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9 Jitter Performance Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs. Practice Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192 Electrical Input Number of Inputs Connector Type Return Loss Equalization 1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps Electrical Outputs Number of Outputs Connector Type 2 Jitter managed 75 ohm BNC N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use. Element Management The VS254 is compatible with the standard FCS183 and the FCS183-AEMS (Advanced Element Management System). Both management systems are Web browser and SNMP enabled. A built-in-test HD-SDI generator can be enabled and switched in remotely to fully test a link. The FCS183-AEMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card. Physical and Environmental Requires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis. Power Consumption <10W Operating Temp 0 ˚C to 50 ˚C ambient Storage Temp –40 ˚C to + 85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS Level 3 Safety UL, CSA, CE low voltage directive EMC FCC Part 15 Class A, CE EMC directive Ordering Information VS254-E-SFP (1310/1550nm and CWDM applications) Optical Output Number of Outputs Connector Type Wavelengths Power Out 1 SC/PC 1310/1550nm, CWDM, DWDM with LSB scrambling 0dBm min, +1dBm typical “SFP” represents locations for small form factor pluggable (SFP) optical devices. SMPTE 299M (Embedding) AES-3 (Balanced and Un-Bal) Dolby-E SFP denotes use of one of the VPG SFP-TV family of high performance video SFPs covering 1310/1550nm and CWDM wavelengths. Please see the SFP Selection Guide for further details. Audio Inputs Standards The VS254 supports both standard and DWDM applications. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. Consult factory for details. network-electronics.com | 59 VENTURA 1.1 High Definition VS254-D-SFP HD-SDI 4xAES Audio De-embedder HD-SDI/SDI/SDTI/ASI/ATSC Fiber Optic Receiver HD-SDI SDI/ASI Opt RX HD-SDI SDI/ASI Cab EQ HD-SDI Generator EDH/CRC Count OR Jitter Buffer EDH/CRC Reset HD-SDI SDI/ASI Driver HD-SDI SDI/ASI DeEmbed Audio LSB Dither The VS254-D-SFP is an HD-SDI audio de-embedder and optical receive card in the VS25x group of High-Definition solutions. As well as de-embedding four AES audio channels it also supports Dolby-E and any AES framed data. The card can also be configured to optically receive bit rates from 10Mbps through 1.5Gbps through its SFP fiber interfaces. • De-embeds up to four AES/EBU audio channels • Transparently handles any AES-framed data such as Dolby-E • 10Mbps to 1.5Gbps with jitter managed and non-jitter managed modes • Jitter management at 1.485Gbps HD, 1.4835Gbps HD and 270Mbps SDI/ SDTI/ASI • Other rates supported in re-clocker bypass mode • SFP PIN and APD optical interfaces available • Minimum of 0dBm optical launch power • Simplified single card spares-holding, configurable EO PIN or APD by simple SFP change • Full CRC and EDH checking in HD-SDI and SDI modes • Built-in HD-SDI test signal generator for self-test • Receives all HD and SD pathological patterns without additional scrambling with both PIN and APD options • SNMP and Web browser support under Ventura AEMS management • NEBS Level 3 compliant 60 | network-electronics.com Driver AES TX 4xAES Dolby-E AC-3 VENTURA High Definition 1.1 VS254-D-SFP Operation Front Panel LED Indicators This powerful HD/AES processor de-embeds up to four AES channels from an HD-SDI video signal. All popular HD formats in the 1485Mbps and the 1485Mbps/1001 are supported. Dolby-E or any AES-framed data is also de-embedded. By adding an SFP the card is readily transformed into a fiber optic network interface. If additional scrambling has been enabled in the VS254-E to allow SMPTE pathological patterns to pass error-free through DWDM network elements, the VS254-D will pass those signals. Element management provides detailed analysis of video and audio signal status, with CRC checking as well as optical interface monitoring and card status with Web browser and SNMP support. Control of all card functions is available through element management or through on-board switches. Video Inputs Standards HD-SDI SMPTE 292M 1080i/50, 1080i/60, 1080i/59.94, 1080p/24, 1080p/25, 1080p/23.98, 720p/60, 720p/59.94 SDI SMPTE 259M SDTI SMPTE 305M ATSC SMPTE 310M DVB-ASI EN50083-9 Jitter Performance Tight telecom level jitter tolerance specifications are maintained at all SD/HD inputs while telecom level jitter transfer and jitter generation specifications are maintained at all SD/HD outputs. Practice Measurement SD/ASI SMPTE RP184 SMPTE RP192/EG33 HD SMPTE RP184 SMPTE RP192 Electrical Input Number of Inputs Connector Type Return Loss Equalization 1 75 ohm BNC >15dB at 1.5Gbps >150m of Belden 1694 at 1.5Gbps Electrical Outputs Number of Outputs Connector Type 2 Jitter managed 75 ohm BNC Optical Input Number of Inputs Connector Type Wavelengths Sensitivity at 1.5Gbps Overload 1 SC/PC 1270nm–1610nm –32dBm (worst case) –8dBm Audio Outputs Standards A row of nine LEDs comprehensively signal the status and alarm conditions of the card. Depending on the configuration of the card the LEDs have different meanings. This is tabulated in the manual. External Alarms N/C relay contact outputs for major and minor alarms. Each alarm and status condition can be programmed as a major or minor alarm or can be disabled if not in use. Element Management The VS254 is compatible with the standard FCS183 and the FCS183-AEMS (Advanced Element Management System). Both management systems are Web browser and SNMP enabled. A built-in-test HD-SDI generator can be enabled and switched in remotely to self-test the card. The FCS183-AEMS provides the simplest Web interface with SNMP supported limited to major and minor pre-defined events. The FCS183-AEMS has more comprehensive browsing with virtual LED front-panel emulation and an SNMP MIB covering all status, control and alarm variables on the card. Physical and Environmental Requires only one slot of the VS103 ten-slot chassis or the VS101 three-slot chassis. Power Consumption <10W Operating Temp 0 to 50 C ambient Storage Temp –40 ˚C to +85 ˚C Relative Humidity 5% to 85% Agency Compliance Telco NEBS Level 3 Safety UL, CSA, CE low voltage directive EMC FCC Part 15 Class A, CE EMC directive Ordering Information VS254-D-SFP (PIN and APD for 1310/1550 and CWDM) VS254-E-SFPD (APD for DWDM applications) SFP and SFPD represent locations for small form factor pluggable (SFP) optical devices. The VS254 supports both PIN, and APD receivers for standard and CWDM as well as APD for DWDM applications where the additional scrambling is used. However to use DWDM SFPs the VS254 must be ordered with a special adapter. This adapter may be field retrofitted or the VS254 can be returned to the factory for conversion to DWDM. Consult factory for details. SFP denotes use of one of the VPG SFP-TV family of high performance video SFPs with PIN or APD technology. Please see the SFP Selection Guide for further details. The standard connector panel supports balanced AES inputs with Phoenix 3-way connectors. If unbalanced BNCs are required please specify at the time of order. SMPTE 299M (de-embedding) AES-3 (balanced and un-bal) Dolby-E Outputs Number of Outputs Connector Type A (A, B are Options) B Sampling Rage Level A B 4 110 ohm, Bal, 3-pin Phoenix 75 ohm, unbalanced 48kHz 1Vp-p +/- 10% 0.5 to 10V p-p network-electronics.com | 61 VENTURA 1.1 High Definition VS551-D-ADC-SFP Transmitter – Universal Analog & Digital Video/Audio Adapter for Fiber Optic Transport • Automatically detects video input format • Converts NTSC/PAL/PAL-M Video and ATSC, SD-SDI, HD-SDI and DVB-ASI inputs to SDTI/SDI and optical output for transport over 270Mbps network • Handles 525/625 SD-SDI and 1.4835/1.485Gbps HD-SDI • Composite test pattern generator • Converts up to four channels of analog audio to AES • Dolby E – compatible • Non-intrusive audio monitoring and level adjustment • Embeds AES converted from analog audio or direct-fed AES into SDTI, SD-SDI or HD-SDI • Warning LEDs for loss of video, loss of audio, CRC/EDH • Small Form-factor Pluggable (SFP) optics available in 1310, 1550, and any ITU CWDM or DWDM wavelength • Engineered to meet NEBS Level 3 requirements • Compatible with FCS183 AEMS and EMS element managers Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of inputs 1 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm Signal level Unbalanced 1.2 Vp-p Balanced 1 to 7 Vp-p Resolution Supports up to 24 bits Sample rates 32kHz, 44kHz, 48kHz sample rates converted to 48kHz optical TRANSMITTER Digital video Standards SDTI (SMPTE-305M), SDI (SMPTE-259M), HD-SDI (SMPTE-292M), DVB-ASI (EN50083-9), ATSC (SMPTE-310M) # of inputs 1 # of outputs 2 electrical, 1 optical Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard analog audio Standards Exceeds RS250C short haul specs # of inputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48 KHz Quantization 20-bit SNR unweighted -90 dBFS Frequency response 0.5 dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, @ 0 dBFS) IMD <0.05% SMPTE @ +2 dBu Crosstalk between channels 95 dB Input/output level 0 dBFS = +24dBu (Hi-Z) 0 dBFS = +18dBu (600 ohms) 62 | network-electronics.com # of outputs Connector Laser type Laser wavelengths Output power level Fiber type 1 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min (1310 & 1550) -0.5dBm min (CWDM) Single mode LED indicators Video mode HD/SD/ASI Loss of input CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 9W max Operating temperature 0 ˚C to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Ordering Options VS551-D-ADC-SFP Analog to digital converter with audio embedder (SFP cage Included, SFP sold separately) For optical interface options, see Ventura SFP Index data sheet. VENTURA High Definition 1.1 VS551-D-DAC-SFP Receiver – Universal Analog and Digital Video and Audio Adapter for Fiber Optic Transport • Receives all SD-SDI, HD-SDI, ASI and ATSC optically and electrically • De-embeds four channels of audio from SD-SDI and HD-SDI and provides AES and analog outputs • Dolby E – compatible • Converts SDTI to NTSC/PAL/PAL-M • Non-intrusive analog audio monitoring and level adjustment • Loss of input, loss of video, EDH/CRC, loss of audio LEDs • Remote loss of video and loss of audio LEDs • Small Formfactor Pluggable (SFP) optics with APD receiver for optimum sensitivity • Engineered to meet NEBS Level 3 requirements • Compatible with the FCS183 comprehensive element management system that provides remote status, alarms and configurations via SNMP and Ethernet Analog video Standards Exceeds RS250C short haul spec Formats NTSC (525 lines), PAL (625 lines) # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Quantization 12-bit Equalization Up to 300m w/Belden 8281 SNR >70dB Differential gain <2% (NTSC), <1% (PAL) Differential phase <0.7° (NTSC), <0.5° (PAL) Digital video Standards SDTI (SMPTE-305M) SDI (SMPTE-259M) HD-SDI (SMPTE-292M) DVB-ASI (EN50083-9) ATSC (SMPTE-310M) # of inputs 1 optical (see optical spec), 1 electrical # of outputs 2 Monitors 1 front panel Connector BNC Impedance 75 ohm Data rate 19.4Mbps, 270Mbps, 1.4835Gbps, 1.485Gbps Equalization Up to 150m at 1.5Gbps with Belden 1694A Up to 300m at 270Mbps with Belden 8281 Jitter Exceeds SMPTE standard Return loss Exceeds SMPTE standard analog audio Standards Exceeds RS250C short haul specs # of outputs 4 Connector 3-pin terminal Impedance Hi-Z or 600 ohm (balanced) Sampling rate 48KHz Quantization 20-bit SNR unweighted -90dBFS Frequency response 0.5dB (20Hz to 20KHz) THD <0.05% (20Hz to 20KHz, at 0dBFS) IMD <0.05% SMPTE at +2 dBu Crosstalk between channels 95dB Input/output level 0dBFS = +24dBu (Hi-Z) 0dBFS = +18dBu (600 ohms) DIGITAL audio Standards AES unbalanced (SMPTE-276M) AES balanced (AES3-1992) Dolby E # of inputs 2 rear balanced or unbalanced Connector Phoenix 3-pin balanced, 110 ohm BNC 75 ohm, unbalanced Signal level Unbalanced 1.2Vp-p Balanced 1 to 7Vp-p Resolution Supports up to 24 bits optical RECEIVER # of inputs Connector Receiver type Input wavelengths Sensitivity Max input power Fiber type 1 SC/PC SFP - APD 1260nm - 1620nm ≤-34dBm –8dBm (+7dBm with 15dB attenuator) Single mode LED indicators Video Mode HD/SD/ASI Loss of input (local and remote) CRC/EDH for HD/SD Audio mode analog/AES Loss of audio Analog 1, 2, 3, 4 AES 1, 2 (local and remote) element management Compatible with the FCS183 comprehensive element management system that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura Series Chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Ordering Options VS551-D-DAC-SFP Universal analog and digital video and audio fiber receiver network-electronics.com | 63 VENTURA 1.1 IP Network Interfaces VS901-TE-27 / VS901-TD-27 JPEG 2000 Compression over SDTI • Artifact-free Motion JPEG 2000 compression—no blocking, tiling or motion dependence • Visually lossless compression to a 12:1 compression ratio • Near-mathematically lossless compression to a 2:1 compression ratio • User-configurable compression ratio, either by explicit setting or by selecting maximum bandwidth of transport interface • Multiplexes audio into the transport stream, either pre-embedded into the HD-SDI signal or by locally embedding from AES interfaces on the encoder • Supports all HD video framing formats at 1485Mbps, 1483.52Mbps • Occupies a single Ventura chassis slot encoder Digital video LED indicators # of Inputs # of Outputs 1 HD-SDI or 3G-SDI coax 1 SDTI coax (SMPTE 305) 1 HD-SDI or 3G-SDI front panel monitor coax Connector Coax Power indicator Loss of input CRC/EDH for HD/SD Optical fault indicator Loss of audio element management encoder DIGITAL audio Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser Interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Due to the complexity of VS901 functions, element management is its primary method of configuration and operation. # of Inputs 4 Connector AES/EBU 110 ohm balanced or 75 ohm single ended units decoder Digital video # of Inputs # of Outputs 1 SDTI coax (SMPTE 305) 1 HD-SDI or 3G-SDI coax 1 HD-SDI or 3G-SDI front panel monitor coax Connector Coax Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 9W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick decoder DIGITAL audio # of Outputs 4 Connector AES/EBU 110 ohm balanced or 75 ohm single ended units Ordering Options VS901-TE-27 HD/SDI compression via JPEG 2000 and mapping to SDTI (SMPTE 305). Carriage of up to four pre embedded AES streams. Separate carriage of VBI information. VS901-TD-27 SDTI Receiver with decompression via JPEG 2000 of HD-SDI. Re embedding of up to four transported AES streams and any transported VBI data For optical interface options, see Ventura SFP Index data sheet. ENCODER and decoder optical TRANSCEIVER # of outputs/inputs Connector 1 SFP transceiver for Ethernet, SDTI, OC3/ STM-1, OC12/STM-4 Encoder and decoder clock input 1 BITS clock input for use with SONET VS901-TE-27 SDI/ASI HD/SDI/ASI HD HD 1 2 3 SDI/ASI Compressed HD Video Compressed HD Video JPEG2000 Encoder Audio & Data De-embedder 1 2 3 4 VS901-TD-27 4 AES Inputs 64 | network-electronics.com SDTI Data AES 1 AES 2 AES 3 AES 4 SDTI MUX SFP SDTI 270Mbps Network SDTI SFP DEMUX Data AES 1 AES 2 AES 3 AES 4 HD/SDI/ASI JPEG2000 Decoder HD HD Audio & Data Embedder 1 2 3 4 AES Outputs 1 2 3 4 VENTURA IP Network Interfaces 1.1 VS901-IE-GE* / VS901-ID-GE* JPEG 2000 Compression Over Gigabit Ethernet • Encoder and decoder each occupy a single Ventura chassis slot • Supports all HD video framing formats at 1485Mbps and 1483.5Mbps • Multiplexes uncompressed audio into the transport stream, either preembedded into the HD-SDI signal or by locally embedding from AES interfaces on the encoder • Transparent carriage of ancillary data • Artifact-free motion JPEG 2000 compression–no blocking, tiling or motion dependence • Intra-frame encoding • Near-mathematically lossless compression with a Gigabit Ethernet interface • Visually lossless compression to a 12:1 compression ratio • Automatically calculates mathematically lossless compression ratio for each frame to ensure constant lossless quality • Configurable FEC with standard and advanced mode settings • Complies with IEEE 802.3 standards • IP/UDP/RTP packets • Simultaneous electrical and optical outputs from encoder • Encode plus decode delay less than 50ms • Compatible with FCS183-AEMS Advanced Element Management System encoder Digital video # of inputs # of outputs Connector LED indicators 1 HD-SDI, SMPTE 292M, SMPTE 299M 1 HD-SDI front panel monitor 75 Ohm BNC Power indicator Loss of HD video Loss of audio CRC errors and IP FEC Optical fault indicator encoder DIGITAL audio # of inputs 4 Connector AES/EBU 110 Ohm balanced or 75 Ohm single ended units Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Due to the complexity of VS901 functions, element management is its primary method of configuration and operation. decoder Digital video # of outputs 2 HD-SDI or 75 Ohm BNC 1 HD-SDI front panel monitor 75 Ohm BNC Connector Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power consumption 10W max Operating temperature 0˚ to 50˚C chassis ambient Storage temperature –40 ˚C to 85 ˚C ambient Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick decoder DIGITAL audio # of outputs 4 Connector AES/EBU 110 Ohm balanced or 75 ohm single ended units ENCODER and decoder Ethernet # of outputs/inputs Connector 1 100/1000 Base-T RJ45 Ethernet connector Ordering Options VS901-IE-GE HD/SDI compression via JPEG 2000 and mapping to Gigabit Ethernet. Carriage of up to four pre-embedded AES streams. Separate carriage of ANC data information VS901-TD-27 Gigabit Ethernet receiver with decompression via JPEG 2000 of HD-SDI. Re-embedding of up to four transported AES streams and any transported ANC data For optical interface options, see the Ventura SFP Index data sheet. ENCODER and decoder optical TRANSCEIVER # of outputs/inputs Connector 1 SFP transceiver for Ethernet, dual SC/PC VS901-IE-GE HD VS901-ID-GE 100/1000 Base-T JPEG2000 Encoder Compressed HD Video HD 1 2 3 4 Audio & Data De-embedder 1 2 AES Inputs 3 4 ANC Data AES 1 AES 2 AES 3 AES 4 100/1000 Base-T Compressed HD Video 270Mbps Network MUX SFP 100/1000 Base-T SFP 100/1000 Base-T DEMUX ANC Data AES 1 AES 2 AES 3 AES 4 JPEG2000 Decoder HD Audio & Data Embedder 1 2 3 4 AES Outputs HD 1 2 3 4 network-electronics.com | 65 VENTURA 1.1 Data VS701 RS422 Control Fiber Optic Transceiver • One full duplex independent RS422 channel • Up to 2Mbps • Low timing jitter due to high oversampling rate • Can be switched through and SDI router • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet 1310/1550/CWDM 1310/1550/CWDM TX RX RX RS422 CH1 VS711 TX 270Mbps Network TX RX RX 270Mbps Digital I/O 270Mbps external alarms # of Inputs 1 # of Outputs 1 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type RS422 CH1 VS711 TX 1 SC/PC 270Mbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode N/C relay contact outputs for major and minor alarm signals. element management Compatible with the FCS183 and FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of optical input Loss of frame Loss of input Loss of channel I/O activity Status Optical/electrical receiver mode Laser transmitter enabled/disabled Model and serial number Controls Receiver mode optical/electrical Laser transmitter enable/disable ID setting for the VS811 (0-65535) Physical and Environmental optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode Ordering Options RS422 # of Channels Connector Receive Data Jitter Receiver Termination Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick 1 DB9 Female <±40ns 124 ohm LED indicators Channel 1 I/O activity Loss of optical input Loss of frame Laser failure DC power 66 | network-electronics.com VS701-SFP RS422 control fiber optic transceiver SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN VENTURA Data 1.1 VS711 Quad RS422 Control Fiber Optic Transceiver • Four full duplex independent RS422 channels • Up to 2Mbps per a channel • Low timing jitter due to high oversampling rate • Can be switched through an SDI router • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet 1310/1550/CWDM RS422 CH2 RS422 CH3 RX RX VS711 RS422 CH4 TX 1 SC/PC 270Mbps SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode RS422 CH4 N/C relay contact outputs for major and minor alarm signals. element management Compatible with the FCS183 and FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Loss of optical input Loss of frame Loss of input Loss of channel I/O activity Status Optical/electrical receiver mode Laser transmitter enabled/disabled Model and serial number Controls Receiver mode optical/electrical Laser transmitter enable/disable ID setting for the VS811 (0-65535) Physical and Environmental 1 SC/PC PINFET pigtail 1260nm–1620nm ≤-34dBm 0dBm Single mode RS422 Channel 1 I/O activity Channel 2 I/O activity Channel 3 I/O activity Channel 4 I/O activity Loss of optical input Loss of frame Laser failure DC power RS422 CH3 270Mbps external alarms optical receiver LED indicators RS422 CH2 VS711 TX 270Mbps Optical transmitter # of Channels Connector Receive Data Jitter Receiver Termination RX RX # of Inputs 1 # of Outputs 1 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type RS422 CH1 TX 270Mbps Network Digital I/O # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type 1310/1550/CWDM TX RS422 CH1 4 DB25 female <±40ns 124 ohm Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V, -12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS711-SFP-TRX Fiber optic transceiver with 4 RS422 ch. SFP Options SFP-TV-1310-SF SFP-TV-1310-SD SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN network-electronics.com | 67 VENTURA 1.1 Data VS721 10/100 Base-T Ethernet Optical Transceiver • Full-featured 10/100 Base-T Ethernet metropolitan transport solution • Greater than 30dB optical link budget • SFP optics allow for optimum sparing and fast configuration to available Ventura wavelengths • Standards based on the fiber interface—100Base-T • UTP port supports 10/100 and half/full duplex as well as auto-negotiation • Automatic cable equalization up to 100m at gigabit rate • Front panel LED information provides link diagnostics allowing for instant fault location • Bandwidth control allows service providers to configure UTP rate to 10 or 100 Mbps • Can be used in both VS101 and VS103 Ventura chassis • NEBS Level 3 compliant • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet 1310/1550/CWDM RJ-45 10/100 Base-T TX VS721 RX 100 Base-T Digital I/O Optical transmitter Output Power Level Fiber Type 1 SC/PC 100/10Mbps SFP 1310nm, 1510nm, 1530nm, 1550nm, CWDM, DWDM 0dBm min Single mode optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type TX RX VS721 RJ-45 10/100 Base-T 100 Base-T element management # of Inputs 1 # of Outputs 1 Connector RJ45 Impedance 100 ohm Data Rate 100/10Mbps Equalization 100M Cat 5e # of Outputs Connector Data Rate Laser Type Laser Wavelengths 1310/1550/CWDM 270Mbps Network 1 SC/PC SFP 1260nm–1620nm ≤–32dBm 0dBm Single mode LED indicators Fiber full/half duplex Fiber link/activity Auto negotiate 10 M 100 M 1G UTP full/half duplex UTP link/activity DC power external alarms N/C relay contact outputs for major and minor alarm signals. 68 | network-electronics.com Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power SFP Iinternal supply voltage SFP transmitter internal bias current SFP internal temperature UTP link alarm Status SFP laser transmitter present Full duplex mode for fiber selected Auto negotiation activated Link speed 100Mbps RJ45 UTP is in full duplex mode SFP transmitter wavelength Model and serial number Controls Laser transmitter enable/disable Physical and Environmental Resides in a single slot of a VS101 or VS103 Ventura series chassis Voltage +3.3V, +5V, +12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Ordering Options VS721 10/100 Base-T Ethernet SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN VENTURA Data 1.1 VS722 Gigabit Ethernet Fiber Transport • Full-featured Gigabit Ethernet metropolitan transport solution • Greater than 30dB optical link budget • SFP optics allows for optimum sparing and fast configuration to available Ventura wavelengths • Standards-based on the fiber interface—1000Base-LX • UTP port supports 10/100/1000 and half/full duplex and auto-negotiation • Automatic cable equalization up to 100m at gigabit rate • Front panel LED information provides link diagnostics allowing for instant fault location • Bandwidth control allows service providers to configure UTP rate to 10 or 100 or 1000 Mbps • Can be used in both VS101 and VS103 Ventura chassis • NEBS Level 3 certified • Compatible with the FCS183-AEMS Advanced Element Management System that provides remote status, alarms and configurations via SNMP and Ethernet 1310/1550/CWDM RJ-45 10/100/1000 Base-T TX VS722 RX 1000 Base-LX DIGITAL I/O OPTICAL TRANSMITTER Output Power Level Fiber Type 1 SC/PC 1000/100/10Mbps SFP 1310nm, 1510nm, 1530nm, 1550nm, CWDM, DWDM 0dBm min Single mode OPTICAL RECEIVER # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type RX TX RJ-45 10/100/1000 Base-T VS722 1000 Base-LX PHYSICAL AND ENVIRONMENTAL # of Inputs 1 # of Outputs 1 Connector RJ45 Impedance 100 ohm Data Rate 1000/100/10Mbps Equalization 100M Cat 5e # of Outputs Connector Data Rate Laser Type Laser Wavelengths 1310/1550/CWDM 270Mbps Network 1 SC/PC SFP 1260nm–1620nm ≤–32dBm 0dBm Single mode LED INDICATORS Fiber full/half duplex Fiber link/activity Auto negotiate 10 M 100 M 1G UTP full/half duplex UTP link/activity DC power EXTERNAL ALARMS N/O relay contact outputs for major and minor alarm signals. Resides in a single slot of a VS101 or VS103 Ventura series chassis. Voltage +3.3V, +5V, +12V Power Consumption 7W max Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-Tick Element management Compatible with the FCS183-AEMS Advanced Element Management System that features SNMP and Web browser interfaces to monitor and configure card status, alarms and controls. Alarms Daughter card power alarm Fiber link alarm SFP optical source fault SFP optical low light SFP transmitter output power low SFP internal supply voltage high SFP internal supply voltage low SFP transmitter internal bias current high SFP transmitter internal bias current low SFP internal temperature high SFP internal temperature low SFP transmitter output power high UTP link alarm Status SFP laser transmitter present Full duplex mode for fiber selected Auto negotiation activated Link speed 1000Mbps RJ45 UTP is in_full_duplex_mode SFP transmitter wavelength Model and serial number Controls Laser transmitter enable/disable Ordering Options VS722-TRX-SFP SFP Options SFP-TR1-1310-PIN-S SFP-TR1-1550-PIN-S SFP-TR1-1470-PIN-C SFP-TR1-1490-PIN-C SFP-TR1-1510-PIN-C SFP-TR1-1530-PIN-C SFP-TR1-1550-PIN-C SFP-TR1-1570-PIN-C SFP-TR1-1590-PIN-C SFP-TR1-1610-PIN-C 1Gbps, TRX, non-CWDM 1Gbps, TRX, non-CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM 1Gbps, TRX, CWDM network-electronics.com | 69 VENTURA 1.1 Specialty ODU201 SDI/ASI Fiber Optic Transport • SDI, SDTI and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of video, loss of input, laser failure and DC power LEDs • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) 1310/1550/CWDM 270Mbps ODU201 Digital video 270Mbps PIN Rcv’r VS231-OE 270Mbps SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) Physical and Environmental Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 Connector BNC Impedance 75 ohm Data Rate Up to 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of Outputs Connector Laser Type Laser Wavelengths Output Power Level Fiber Type 270Mbps Network The (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NEMA 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear. Voltage +12V +/-1V Power Consumption 3W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Ordering Options 1 ST Pigtail, SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode LED indicators SDI in Laser fail DC power 70 | network-electronics.com ODU201-SFP-EO ODU-PSDC SDI/ASI E/O, no laser DC, 1 Amp powersupply SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN VENTURA Specialty 1.1 ODU271 RS422 Control Fiber Optic Transceiver • Single RS422 channel • Up to 2Mbps per channel • Low timing jitter due to high oversampling rate • Can be switched through an SDI router • SDI, SDTI and ASI compatible • Automatic data rate selection • Passes SMPTE-259M 270Mbps SDI pathological test sequence • Loss of video, loss of input, laser failure and DC power LEDs • Automatic cable equalization up to 300m for Belden 8281 • Optical and electrical 270Mbps outputs • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength 1310/1550/CWDM RX VS231-OE SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) VS701-OE RS422 Data I/O 1310/1550/CWDM TX RS422 Data I/O SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) ODU271 RX TX 270Mbps Network 1310/1550/CWDM RX TX Digital I/O LED INDICATORS Standards SDI (SMPTE-259M) SDTI (SMPTE-305M) DVB-ASI (EN50083-9) # of Inputs 1 Connector BNC Impedance 75 ohm Data Rate 270Mbps Equalization Up to 300m w/Belden 8281 Optical transmitter # of Outputs Connector Data Rate Laser Type Laser Wavelengths Output Power Level Fiber Type 2 ST 270Mbps, RS422 SFP 1310nm, 1550nm, CWDM, DWDM 0dBm min Single mode RS422 Alarms SDI Alarms Laser fail SDI in Low light Laser fail LOF (optical input) RS422 in RS422 out DC power Physical and Environmental The (226.54mm x 149.63mm x 51.13mm) chassis is suitable for mounting within a NEMA 4 enclosure or mounting on a flat horizontal or vertical surface with input, output and power connections to the rear. Voltage +12V +/-1V Power Consumption 8.5W typical Operating Temperature 0 ˚C to 50 ˚C chassis ambient Storage Temperature –40 ˚C to 85 ˚C ambient Relative Humidity 5% to 85% Ordering Options optical receiver # of Inputs Connector Receiver Type Input Wavelengths Sensitivity Max Input Power Fiber Type 1 ST PIN 1260nm–1620nm ≤–34dBm 0dBm Single mode RS422 # of Channels Connector Receive Data Jitter Receiver Termination 1 DB9 female <±40ns 124 ohm ODU271-SFP-EO-SFP ODU-PSDC SDI/422 E/O, TX + RS422 Transceiver DC, 1 Amp Power Supply SFP Options SFP-TV-1310-SF SFP-TV-1550-SD SFP-TV-1470-C SFP-TV-1490-C SFP-TV-1510-C SFP-TV-1530-C SFP-TV-1550-C SFP-TV-1570-C SFP-TV-1590-C SFP-TV-1610-C SFP-RV-PIN Video 270/1500Mbps, TX, non-CWDM FP Video 270/1500Mbps, TX, non-CWDM DFB Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX,CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, TX, CWDM Video 270/1500Mbps, RX, PIN network-electronics.com | 71 VENTURA 1.1 Specialty VS192 2-Channel SMPTE310-M to DVB-ASI Converter The VS192 is a SMPTE310-M to DVB-ASI converter with dual SMPTE310-M input and dual coaxial cable and single optical output for each channel. It has two independent transmission channels which can accept SMPTE310-M transmission stream (19.39Mbps) and output DVB-ASI at 270Mbps. Each channel can be configured as an electro-optical converter by the installation of a VPG SFP optical video laser module. • Two independent channels per card • SMPTE310-M to DVB-ASI mapping • Optical and electrical 270Mbps outputs • 188, 204 and 208 byte support • Small Formfactor Pluggable (SFP) optics available in 1310, 1550 or any ITU CWDM or DWDM wavelength • ATSC and ASI compatible • Automatic recognition, control and configuration by FCS183-AEMS and FCS183-AEMS using SNMP or Web browser interface • User definable alarms based on priority (major, minor or no alarm) • Slow start circuit on all power rails to minimize power supply overshoot • NEBS Level 3 compliant 72 | network-electronics.com VENTURA Specialty 1.1 VS192 Standard Application for VS192 ATSC Transport Stream (SMPTE310-M) to DVB-ASI Adapter SMPTE310-M Broadcast ATSC TS1 Studio SMPTE310-M ATSC TS2 VS192 DVB-ASI (1) DVB-ASI (2) 270Mbps DVB-ASI Transport Network Optical or Telco DVB-ASI (1) DVB-ASI (2) Cable or IPTV or Satellite Headend IPTV Cable Digital video element management Standards 19.392Mbps (SMPTE310-M) DVB-ASI (EN50083-9) # Of Inputs 2 (SMPTE310-M) # Of Outputs 4 (coaxial cable) 2 (optical fiber) Connector BNC Impedance 75ohm Data Rate Up to 270Mbps Equalization Up tp 200m optical transmitter # Of Outputs Connector Laser Type Laser Wavelength Output Power Level Fiber Type } Distribution to Residential Customers 2 SC/PC SFP 1310nm, 1550nm, CWDM, DWDM -0.5dBm min Single mode led indicators PWR Backplane power status CH1 SMPTE310-M Activity on input CH1 LSR SFP laser fault status CH2 SMPTE310-M Activity on input CH2 LSR SFP laser fault/presence Compatible with the FCS183-AEMS and FCS183-AEMS that features SNMP and Web browser interfaces that provide monitoring and/or configuration of the card’s status, alarms and controls. Status CH1/CH2 SMPTE310-M CH1/CH2 SFP laser transmitter CH1/CH2 SFP laser transmitter FAIL Controls set by switches/element management CH1/CH2 default output enabled by DIP switch with loss of SMPTE310-M input Controls CH1/CH2 default output enabled with loss of SMPTE310-M input physical and environmental The VS192 card resides in a single slot of a VS103 series chassis. Voltage 5V and 3.3V chassis supply Power Consumption 7W max Operating Temperature 0 °C/32°F to 50 °C/122°F Storage Temperature -40 °C/-40°F to 85 °C/185°F Relative Humidity 5% to 85% Compliance NEBS Level 3, UL, CSA, CE, FCC (Part 15, Class A), C-TICK, and RoHS Ordering Options VS192-SFP SMPTE310-M to DVB-ASI converter Configuration Each channel will have simultaneous optical and electrical outputs if a transmitter SFP is populated. Enable “keep-alive” separately for each channel, controlled by element management or DIP switch, consisting of option to output continuous “comma” characters in absence of input SMPTE310-M signal. network-electronics.com | 73 VENTURA 1.1 Specialty Break Out Panel, Frame and Cable VS150-FR –1RU break out panel frame for one or two break out panels VS711 BP-PL75 – break out panel for VS711. Eight twin-ax PL75 connectors DB25/PL-75-XX – cable between VS711dB25 connector and PL75 break out panel XX is the cable length in feet. Not to exceed 10 feet. 74 | network-electronics.com VENTURA 1.1 network-electronics.com | 75 VENTURA 1.1 SFP Selection Index SFP Options Small Form-factor Pluggable Components SFP components provide flexibility by enabling a Ventura card to support different line speeds or laser wavelengths at different times, or to change from simplex to duplex communications. This document describes the functions provided by various SFP components, and the Ventura cards where they can be used. Video Products Group SFP part numbers indicate the part’s laser color or wavelength in the third part-number element. The fourth element should be interpreted as follows: S 1310 or 1550 Standard DFB SD Standard Distributed Feedback (not “Standard Definition”) SF Standard Fabrey-Perot C CWDM PIN Optimized for 270Mbps (SD-SDI) APD Optimized for 1485Mbps (HD-SDI) 270Mbps simplex video signals Available for: VS192 VS201 VS501 VS621 VS701 ODU201 VS194 VS231 VS551 VS661 VS711 ODU271 Part number SFP-TV-1310-S 270 or 1485Mbps simplex video signals Available for: VS251 VS252 Part number 76 | network-electronics.com VS254 SFP-TV-1310-SD VS721 VENTURA SFP Selection Index 1.1 SFP Options 270 or 1485Mbps simplex video signals Available for VS192 VS201 VS251 VS501 VS621 VS701 ODU201 VS194 VS231 VS252 VS551 VS661 VS711 ODU271 VS254 VS721 Part numbers: SFP-TV-1470-C SFP-TV-1530-C SFP-TV-1570-C SFP-RV-PIN (270) SFP-TV-1490-C SFP-TV-1550-C SFP-TV-1590-C SFP-RV-APD (1485) SFP-TV-1510-C SFP-TV-1550-SD SFP-TV-1610-C 270Mbps full duplex video signals Available for VS231-OO Part numbers: SFP-TRV-1310-PIN-SF SFP-TRV-1470-PIN-C SFP-TRV-1550-PIN-C SFP-TRV-1550-PIN-SD SFP-TRV-1490-PIN-C SFP-TRV-1570-PIN-C SFP-TRV-1510-PIN-C SFP-TRV-1590-PIN-C SFP-TRV-1530-PIN-C SFP-TRV-1610-PIN-C 1485Mbps full duplex video signals Available for VS251 VS252 VS254 Part numbers: SFP-TRV-1310-APD-SD SFP-TRV-1470-APD-C SFP-TRV-1550-APD-C SFP-TRV-1550-APD-SD SFP-TRV-1490-APD-C SFP-TRV-1570-APD-C SFP-TRV-1510-APD-C SFP-TRV-1590-APD-C SFP-TRV-1530-APD-C SFP-TRV-1610-APD-C 3Gbps simplex signals Available for VS411 VS811 Part numbers: SFP-T3-1310-S SFP-T3-1510-C SFP-T3-1550-S SFP-T3-1610-C SFP-T3-1470-C SFP-T3-1530-C SFP-T3-1570-C SFP-R3-APD SFP-T3-1490-C SFP-T3-1550-C SFP-T3-1590-C 1Gbps full duplex signals Available for VS722 Part numbers: SFP-TR1-1310-PIN-S SFP-TR1-1510-PIN-C SFP-TR1-1570-PIN-C SFP-TR1-1550-PIN-S SFP-TR1-1530-PIN-C SFP-TR1-1590-PIN-C SFP-TR1-1470-PIN-C SFP-TR1-1550-PIN-C SFP-TR1-1610-PIN-C SFP-TR1-1490-PIN-C network-electronics.com | 77 PLUS 1.2 Monitoring and Test System FCS1000 DVB-ASI/SDI Monitoring and Test System FCS100 provides a high-density, cost-effective QoS monitoring solution. Each input has a 270Mbps interface, allowing monitoring of either DVB-ASI signals or serial digital video signals. Service management is provided via an embedded PC-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. All alarm conditions can be mapped into SNMP traps as well as individual GPI outputs for local alarms. • In-service monitoring for up to 16 channels in 1RU • DVB-ASI or SMPTE 259 SDI capable • Checking of all DVB input streams to ETR 101 290 • Checking to SMPTE RP165 on SDI input streams • High-impedance passive ‘BNC Tee’ for each channel • Comprehensive SNMP traps and informs • Separate GPI contact alarms for each channel • Full internal diagnostics • ASI stream handling from 16Kbps–216Mbps • 10/100baseT Ethernet management port • Serial port communications for local diagnostics and ISDN/PSTN adapters • Powerful alarm filtering and logging • QoS profile presets and weekly scheduling • Remote uploads of new schedules and firmware upgrades 78 | network-electronics.com PLUS Monitoring and Test System 1.2 FCS1000 DVB-ASI/SDI Monitoring and Test System OPERATION Browser based, multi-channel, menu-driven QoS monitoring system. Configurable for SDI or ASI in groups of four. A set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTE RP165 or ETR 101290. Up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling. An alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. Individual channel SNMP informs are generated and sent based on the settings of this screen. DVB-ASI Monitoring SMPTE 259M SDI Monitoring ETR 101 290 SMPTE RP165 Signal present Signal present TS sync loss EDH–Missing TS sync byte errors EDH–Packet error PAT error Active Picture (AP) EDH error here Continuity count error AP error detected already PMT error AP unknown error status PID error Full Field (FF) error detected here PCR error / accuracy FF error detected already CAT error FF unknown error status NIT error Ancillary (ANC) error detected here SDT error ANC error detected already EIT error ANC unknown error status RST error Other alarms TDT error Video black RS FEC Error Freeze frame Continuity count Audio (group error, silence, phase and overload) Power and Environmental Power Automatic 110~240 V AC, IEC connector Power Consumption 0.15A , 240VAC, <35W Cooling Forced via side intake and exhaust vents Operating Temperature Between 0 °C and 50 °C Operating Humidity 10% to 90% (non-condensing) Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls. Some of the features are: - SNMP V2c ready - Telnet based remote and secure login - Remote firmware downloads Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10Mbps No. of Connectors Single access (16 channels) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 RS232 / EIA232 For Linux System configuration (two connectors, front and rear access) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector DSUB-25 pin No. of Connectors 1, with 16 TTL compatible I/O lines Physical Width Height Depth Weight Front panel: 19” EIA standard (483mm) (exc. rack ears: 440m) 1.7” (43mm), 1RU 19” (484mm) (including rear connectors) 11lbs. (5kg) (6kg with delivery packing) Ordering Options FCS1000 Focus monitoring and test system network-electronics.com | 79 PLUS 1.2 Point-to-Point Fiber Optic Transport TV-1 PLUS Multi-Format Video & Audio Fiber Optic Link with Jitter Removal • NTSC/PAL/PAL-M/PAL-N, SDI or ASI, plus audio transport in a single 1RU chassis • Signal-to-noise ratios in excess of 73dB • 12-bit analog video encoding • SNMP Element Management via 10-BaseT Ethernet interface • Locked selection of chosen tariff • Exceeds 250C Short Haul Specifications • 4 audio channels of input: 2 AES signals of 2 channels each or 4 analog audio channels or 1 AES signal and 2 analog audio channels • Selectable re-sampled or non re-sampled AES modes • Supports SMPTE 272M asynchronous (resampled) and synchronous (non-resampled) • 48 kHz insertion • Removal of SDI timing and alignment jitter • Automatic EDH correction and/or insertion • Indicators/external alarms for loss of carrier & audio 80 | network-electronics.com PLUS Point-to-Point Fiber Optic Transport 1.2 TV-1 PLUS STANDARDS / COMPLIANCE DIGITAL VIDEO SDI SMPTE 259M SDTI SMPTE 305M DVB-ASI EN50083-9 DIGITAL AUDIO AES/EBU AES-1992 & Dolby E Embedding Acc. to SMPTE 272M ANALOG VIDEO and AUDIO NTSC Exceeds RS250C short haul NTSC Exceeds Telcordia GR338-CORE PAL Exceeds ITU-R624-4 and CCIR 567 SNR in excess of 73dB COMPLIANCE Designed for NEBS Level 3 Compliance Safety UL,CSA, CE EMC FCC Class A, CE ANALOG VIDEO Qty TX* 1 input plus 1 loop through plus 1 front panel monitor of input Qty RX* Duplicate outputs plus 1 front panel monitor of output Connector type 75Ω BNC floating CMMR >60dB @ 60Hz Return Loss >30dB Cable EQ >130m (Belden 8281) Quantization 12 bits Signal-to-Weighted-Random Noise Ratio (10kHz to 4.2 MHz) 73dB ANALOG AUDIO Qty TX* Qty RX* Connector Type Level 4 inputs plus 4 front panel monitors of inputs Duplicate outputs plus 4 front panel monitors of outputs 600ohm Phoenix balanced FS + 18dBu @ 600ohm OPTICAL CONFIGURATION OF SERVICE SERVICE SELECTION SWITCH Location On TX front panel Switch type Rotary switch Termination 75ohm termination switch for NTSC/PAL/ PAL-M video (on/off) Different combinations of video and audio can be set using either Element Management or the front panel rotary switch settings as listed: TX Output Power -2dBm (+/- 1dB) Wavelength 1310nm or CWDM Optical Receiver 1200nm to 1600nm RX Sensitivity <-32dBm (10E-9 EDH) Overload <–1dBm (10-9 EDH) Connectors SC/PC NOTE: *Video can be either digital or analog. Audio can be a total of two stereo’s with any mix of analog and digital or analog only or digital only. ALARM MANAGEMENT JITTER MANAGEMENT JITTER TOLERANCE JITTER TRANSFER >4UI in the range of 10Hz to 10kHz >0.25UI in the range of 1MHz to 5MHz >20dB attenuation at jitter frequency > 1kHz PHYSICAL INTERFACES DIGITAL VIDEO Qty TX* Qty RX* Connector type Signal level Return Loss Cable EQ 1 input plus 1 front panel monitor of input 1 input plus 1 front panel monitor of input 75Ω BNC 800mV (pk-pk) >15dB >300m (Belden 8281) DIGITAL AUDIO Qty TX* Qty RX* Connector Type 2 AES Inputs Duplicate outputs plus front panel monitors of outputs 110Ω Phoenix balanced FRONT PANEL LEDs Loss of video Yellow (or off) SDI detect Green (or off) ASI detect Green (or off) NTSC/PAL detect Green (or off) Loss of audio Yellow (or off) An audio 1 detect Green (or off) An audio 2 detect Green (or off) AES 1 detect Green (or off) AES 2 detect Green (or off) Power/Fan Red / Green Laser alarm (TX) Red (or off) Optical alarm (RX) Red / Yellow Alarm data is also accessible via a single Phoenix 3-pin male connector located on the rear of each chassis (TX and RX). SNMP Element management SNMP Element Management is provided via an Ethernet interface (10-BaseT) located on the rear of each chassis. This enables remote configuration and monitoring of alarms through a third party element management system or using VPG’s GUI. POWER / ENVIRONMENTAL Voltage Redundancy Power TX/RX Current Operating temp Storage temp Humidity 90-254VAC, 50Hz/50Hz Dual PSU’s, each fused separately <20W 1.5Amps 0 °C to +50 °C -40 °C to +80 °C 10% - 90% RH, non-condensing PHYSICAL Dimensions Weight 1RU rack mount (1.75”Hx 19”W x 14”D) 10 lbs ORDERING OPTIONS TV-1 PLUS TX: 1RU Encoder/Transmitter TV-1 PLUS RX: 1RU Receiver/Decoder Link with Jitter Removal network-electronics.com | 81 PLUS 1.2 Point-to-Point Fiber Optic Transport TV-C PLUS MPEG 2 Encoder and Decoder NTSC/PAL/SDI + Audio to ASI/DS3/100BaseT Network Interfaces • NTSC/PAL composite or SDI inputs and outputs • Eight independent channels of analog audio or four AES/EBU • Video and audio gain and cable EQ adjust at all analog I/Os • Supports pre-embedded or locally embedded audio • DVB-ASI, DS3 and 10/100 Base-T interfaces • Video and audio test pattern generators for built-in automated testing of equipment and link • Full VBI support • 4:2:2 P at ML with transport stream of up to 50Mbps • 4:2:0 support with transport streams of up to 25Mbps • Simple GOP structure configuration through element management GUI • Intuitive front panel, easy-to-navigate LCD menu with push button controls • AC and DC power options with optional redundancy 82 | network-electronics.com PLUS Point-to-Point Fiber Optic Transport 1.2 TV-C PLUS Operation Decoder Outputs-Video The TV-C PLUS MPEG-2 encoder and decoder products are designed with the exacting needs of the telecom service provider in mind. The product addresses the fact that most service providers are operating in an environment where NTSC/PAL and analog audio and SDI and AES are all widely used, often by the same customer who is interconnecting digital and analog islands. The TV-C PLUS can be configured to seamlessly bridge these worlds at any desired quality level with full MP at ML and 4:2:2 P at ML support. Ease-of-use features like built-in test generators and readily accessible equalization and gain adjustments provides the operator fast and easy ways to set up and configure the equipment in non-ideal environments. Also, by providing ASI, Ethernet and DS3 network interfaces the service provider can directly use the equipment in most applications. Compression/De-Compression Video Format MPEG-2 (ISO/IEC 13 818-2) Profile 422P at ML or MP at ML GOP Adjustable Bit rate Delay From 1,5Mbps to 50Mbps <140ms Audio Format Mode Bit rate MPEG-1 Layer II (ISO/IEC 11172-3) Stereo, Joint Stereo, Mono, Dual Mono From 64 to 384Kbps Encoder Inputs – Video Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m Digital Format Cable Eq SDI 4:2:2 (625/625) (ITU-R 656) >250m Belden 8281 Other Vertical Blanking Interval (VBI) transport is fully supported by stripping the VBI lines at the transmit end, multiplexing them uncompressed for transport and re-inserting at the receive end into the reconstituted video signal. An SDI pattern generator is also built into the encoder and can be switched in to the processing chain ahead of the compression engine thereby providing end-to-end quality testing of the entire compression, transport and decompression process. Encoder Inputs – Audio Analog Number of inputs Up to 8 independent channels Connector type Phoenix 3-pin Impedance 600 ohm or Hi-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz Analog System specifications Number of inputs Impedance Nominal level Bandwidth S/N Lum Wt. Cable Eq PAL/NTSC (ITU R-BT 470.RS250-C) 1 75 ohm 1Vpp >5MHz >68dB (Profile dependent) >100m Digital Format SDI 4:2:2 (625/625) (ITU-R 656) Decode Outputs – Audio Analog Number of outputs Up to 8 independent channels Connector type Phoenix 3-piin Impedance 600 ohm or Lo-Z S/N (TX to RX) > 80dB rms, > 62dB Digital System Specification AES-3 Connector type Three, Phoenix Impedance 110 ohm, Balanced Sample frequency 32, 44.1, 48Khz Network Interfaces Encoder/Decoder Formats ASI EN 50083-9 E3 G.751 DS-3 G.751, C-Bit Parity or M-Frame* 10/100BaseT UDP/RTP, Unicast and Multicast Management and Control Both encoder and decoder can be configured via front panel push buttons and LCD display. The main status, control and alarm interfaces are through an RS-232 port and an RJ-45 10 BaseT port on the rear panel of each unit. Physical and Environmental The TV-C PLUS is fitted with both AC plus DC power supplies. Redundancy is enhanced through unique cross coupling of DC inputs and outputs when two or more units are present. Power consumption <25 Watts per unit Operating temp 0 ˚C to 50 ˚C ambient Storage temp –40 ˚C to +85 ˚C Relative humidity 5% to 85% Agency compliance Safety UL, CSA, CE Low Voltage Directive EMC FCC Part 15 Class A, CE EMC Directive Ordering Information VPG TV-C PLUS – ENC Encoder VPG TV-C PLUS – DEC Decoder Other Audio may also be carried pre-embedded in the SDI stream. If configured to do so, this audio will be de-embedded and processed by the encoder. An on-board tone generator is also present that can be enabled for link and audio processing verification. network-electronics.com | 83 BRAVONET 1.3 Chassis and Power Supply VPG6200 2RU Modular Universal Chassis • Chassis design supports two modules for low density applications • Symmetrical architecture for slot independence • Mid-plane design enables mix-and-match of modules and connections • Chassis accepts any audio/video transport module designed for the BRAVOnet™ product line • Redundant AC or DC power supply system with load-sharing • Built-in fiber management • Element management module is mounted on the power supply, saving a chassis slot Power Supply System AC DC Input voltage options 108-250VAC -48VDC Input AC frequencies 46-63Hz Power consumption <30W per module (fully configured) Additional features Power supplies are dual redundant, load-sharing Environmental/Compliance Operating temperature 0 °C to +50 °C Storage temperature -10 °C to +70 °C Humidity 20%–80%, non-condensing EMC compliance FCC, CE Safety compliance UL, CSA, CE Element Management Optional module can be attached to power supply (does not consume a CODEC slot). This optional card supports two functional module slots. Its RS-232 interface may be chained to support up to 32 chassis. ASCII command-line interface is provided for ease of use. Consult the VPG Element Management System data sheet for further information on element management software capability. 84 | network-electronics.com Advanced Element Management Optional module can be attached to power supply (does not consume a CODEC slot). This optional card supports two functional module slots. Its browser user interface allows for ease of use. MIB tables available for integration within SNMP compliant systems. Monitoring Status, control, and alarm messages can be sent to the element management software. These messages include chassis-specific information: Status Module present/absent Option(s) present/absent Module location/ID/serial number Control Set module location/ID Alarm Module fail Over-temperature ORDERING INFORMATION Contact factory for ordering information. BRAVONET Chassis and Power Supply 1.3 VPG6000 5RU Modular Universal Chassis System • Symmetrical architecture for slot independence • Mid-plane design enables mix-and-match of modules and connections • Chassis accepts up to six standard audio/video transport modules designed for the BRAVOnet™ product line • Redundant AC or DC power supply system with load-sharing and supply line redundancy • Element management module is mounted on the power supply, saving a chassis slot • Chassis-mounted wavelength division multiplexer for two or four wavelength systems Power Modules Signal Modules Net Mgmt Module Backplane Power Bus Network Management Bus Connector Panels Power Inputs Signal I/Os Network Management I/O Element Management Optional module can be attached to power supply (does not consume a CODEC slot). Its RS-232 interface may be chained to support up to 32 chassis. ASCII command line interface is provided for ease of use. Consult the VPG Element Management System data sheet for further information on element management software capability. Ordering Information Chassis VPG6000CH-03 VPG6000CH-05 5RU universal modular chassis with heat deflector/fan assembly 5RU universal modular chassis with heat deflector/fan assembly, For use with RJ-45 port ANM element manager. Advanced Element Management Optional module can be attached to power supply (does not consume a CODEC slot). This optional card supports two functional module slots. Its browser user interface allows for ease of use. MIB tables available for integration within SNMP compliant systems. Power Supply System AC DC Input voltage options 108-132VAC -24VDC 210-250VAC -48VDC Input AC frequencies 46-63Hz Power consumption <30W per module (fully configured) Chassis capacity 180W, max. Additional features Power supplies are dual-redundant, loadsharing and hot-swappable Power Supplies and Accessories VPG6000AC Power Supply VPG6000-120 115VAC, nom. VPG6000-120-NM 115VAC + Net Man card, nom. VPG6000-120-ANM 115VAC + Net Man card, nom. VPG6000DC Power Supply VPG6000-48 -48VDC VPG6000-48-NM -48VDC + Net Man card VPG6000-48-ANM -48VDC + Net Man card 6000CH Filler Panels VPG6000FP-1 I/O module one-slot filler panel kit VPG6000FP-3 I/O module three-slot filler panel kit VPG6000FP-PS PSU slot filler panel kit Environmental/Compliance Operating temperature 0 °C to +50 °C Storage temperature -10 °C to +70 °C Humidity 20%–80%, non-condensing EMC Compliance FCC, CE Safety Compliance UL, CSA, CE network-electronics.com | 85 BRAVONET 1.3 Element Management FCS6000 AEMS FCS6000 AEMS (Advanced Element Management System) VPG Advanced Element Management System Back plane FCS6000-AEMS Front Panel LEDs and RJ-45 Linux based single board computer 32-bit SoC 100MIPS Connector panel Ethernet Transformer RJ-45 PC and Alarm Processing IDC-50 Serial Ports RS232 (x2) 128Mb Flash DIP Switch 64Mb SDRAM Programmable General Purpose I/O GPIO (8 I/Os) Power Conversion The FCS6000 AEMS is a Linux-based element management card managing the BRAVOnet series cards. It acts as an SNMP agent for all cards in the shelf, controls and configures them using a Web browser and stores all the data in Flash (buffer) memory. The FCS6000 AEMS can be configured to control other cards using a remote and secure Telnet session. The FCS6000 AEMS is located within a power supply slot and is unobtrusive in installing or uninstalling and acts automatically as soon as a new card is inserted in one of the slots in the shelf. It uses residual power to save the data and shuts down in a controlled manner. • Automatic recognition, control and operation of line cards • Web browser and SNMP based monitoring and controlling • Remote firmware download using remote and secure Telnet session • Date time stamped history and data recording in Flash memory (buffer) • Chassis Environment reporting using temperature and fan speed sensor (LED indicators) • On-board Microprocessor details: 100MIPS, 32-bit RISC based SoC, External 128Mb flash and 64Mb SDRAM • Safe operation transfer to updated firmware (starts using new firmware after validation) • Linux-based system • User definable alarms based on priority (major, minor or no alarm) FANS P O W E R P O W E R # 2 # 1 A E M S S L O T S L O T S L O T S L O T S L O T S L O T # 1 # 2 # 3 # 4 # 5 # 6 VPG6000 chassis 86 | network-electronics.com PC Lines and Alarms BRAVONET Element Management 1.3 FCS6000 AEMS SNMP agent #1 SNMP manager #1 SNMP agent #N Get, Set Network Inform SNMP manager #N Get, Set Inform BRAVOnet AEMS SNMP agent Web browser Web browser Web server #X Web manager #X FCS6000 AEMS as snmp agent A single FCS6000 AEMS acts as the proxy agent for up tp 9 Ventura Line Cards, 2 power supplies and the fan assembly placed in the VPG6000 Chassis. Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls for BRAVOnet Series cards installed in a VPG6000 chassis. Some of the features are given below: -SNMP V2c ready -Telnet based remote and secure login -Remote firmware downloads AEMS System location Mechanically mounted on Power Supply #1 providing electrical connection to back plane of chassis. Does not consume a VPG6000 slot. Environmental/Compliance Operating temperature 0 °C to + 50 °C Storage temperature –10 °C to + 70 °C Humidity 20%–80%, non-condensing EMC Compliance FCC, CE Safety Compliance UL, CSA, CE Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element Management Connector RJ45 10/100 Mbps No. of Connectors Single access rear interface Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 Mozilla Firefox 1.0 (Newer version supported) RS232 / EIA232 (For Linux System configuration) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with User’s Equipment Connector Micro-D 9-pin No. of Connectors 1, with 8 user configured, TTL compatible I/O lines Ordering Options FCS6000 AEMS Advanced Element Management System card GPIO Cable FCS6000 AEMS general purpose input/ output card connector cable network-electronics.com | 87 BRAVONET 1.3 Monitoring and Test System FCS1000 DVB-ASI/SDI Monitoring and Test System FCS100 provides a high-density, cost-effective QoS monitoring solution. Each input has a 270Mbps interface, allowing monitoring of either DVB-ASI signals or serial digital video signals. Service management is provided via an embedded PC-based processor which provides a full Simple network management Protocol (SNMP) interface and Web browser display. All alarm conditions can be mapped into SNMP traps as well as individual GPI outputs for local alarms. • In-service monitoring for up to 16 channels in 1RU • DVB-ASI or SMPTE 259 SDI capable • Checking of all DVB input streams to ETR 101 290 • Checking to SMPTE RP165 on SDI input streams • High-impedance passive ‘BNC Tee’ for each channel • Comprehensive SNMP traps and informs • Separate GPI contact alarms for each channel • Full internal diagnostics • ASI stream handling from 16Kbps–216Mbps • 10/100baseT Ethernet management port • Serial port communications for local diagnostics and ISDN/PSTN adapters • Powerful alarm filtering and logging • QoS profile presets and weekly scheduling • Remote uploads of new schedules and firmware upgrades 88 | network-electronics.com BRAVONET Monitoring and Test System 1.3 FCS1000 DVB-ASI/SDI Monitoring and Test System OPERATION Browser based, multi-channel, menu-driven QoS monitoring system. Configurable for SDI or ASI in groups of four. A set-up screen for each group of four allows for detailed monitoring from top level alarms and faults, right down to fine-grain details of SMPTE RP165 or ETR 101290. Up to four different program profiles can be pre-loaded for each channel and a scheduler screen allows for one full week of profile scheduling. An alarm conditioning/filtering/logging screen provides for alarm persistence and hold time filtering as well as criticality assignment and threshold settings. Individual channel SNMP informs are generated and sent based on the settings of this screen. DVB-ASI Monitoring SMPTE 259M SDI Monitoring ETR 101 290 SMPTE RP165 Signal present Signal present TS sync loss EDH–missing TS sync byte errors EDH–packet error PAT error Active picture (AP) EDH error here Continuity count error AP error detected already PMT error AP unknown error status PID error Full field (FF) error detected here PCR error / accuracy FF error detected already CAT error FF unknown error status NIT error Ancillary (ANC) error detected here SDT error ANC error detected already EIT error ANC unknown error status RST error Other alarms TDT error Video black RS FEC Error Freeze frame Continuity count Audio (group error, silence, phase and overload) Power and Environmental Power Automatic 110~240 V AC, IEC connector Power Consumption 0.15A , 240VAC, <35W Cooling Forced via side intake and exhaust vents Operating Temperature Between 0 °C and 50 °C Operating Humidity 10% to 90% (non-condensing) Element management Features SNMP and Web browser interfaces that provide monitoring and/ or configuration of the status, alarms and controls. Some of the features are: - SNMP V2c ready - Telnet based remote and secure login - Remote firmware downloads Connector Types Ethernet Telnet Remote Linux system configuration FTP Firmware downloads HTTP Web browser access SNMP Element management Connector RJ45 10Mbps No. of Connectors Single access (16 channels) Password Levels Administrator/User Operating Systems Windows 98, 2000 Pro, XP Pro and Linux Web browser Internet Explorer 6.0 Netscape Navigator 7.2 RS232 / EIA232 For Linux System configuration (two connectors, front and rear access) Connector DB9 (male) No. of Connectors 2 Baud Rate Up to 115200, 1 stop bit, 8 data bits, no parity GPIO To interface Ventura chassis with user’s equipment Connector DSUB-25 pin No. of Connectors 1, with 16 TTL compatible I/O lines Physical Width Height Depth Weight Front panel: 19” EIA standard (483mm) (exc. rack ears: 440m) 1.7” (43mm), 1RU 19” (484mm) (including rear connectors) 11lbs. (5kg) (6kg with delivery packing) Ordering Options FCS1000 Focus Monitoring and Test System network-electronics.com | 89 BRAVONET 1.3 ASI Multiplexer/Network Adapter VPG9155 STM-1/OC-3 DVB-ASI TS Multiplexer – Bandwidth Optimizer The VPG9155 MUX/DEMUX interoperates with other VPG products to form a layered approach to multiplexing and network interfacing ranging from E3/DS-3, OC-3, to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPG9155 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 155Mbps or 140Mbps carrier. • Multiplexes four DVB-ASI inputs into one OC-3/STM-1/STS-3 (155Mbps) or E4 (140Mbps) output • Maximizes ASI payload capacity (up to 148Mbps over a 155Mbps network) • Inputs can be switched to any output • Used with VPG 6000/6200 chassis systems under standard or AEMS (Advanced Element Management System) • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Each input TS is assigned conditional access codes (2 layers) for secure content delivery 90 | network-electronics.com BRAVONET ASI Multiplexer/Network Adapter 1.3 VPG9155 MUX – INPUT SIGNALS Input signal type Maximum Payload E4 (140Mbps) OC-3/STM-1 Number of inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI* MUX ALARMS (set as either; none, major or minor) 270Mbps DVB-ASI–EN50083-9 or ASI*, containing data from 800kbps up to 148Mbps 135Mbps 148Mbps 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes MUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical 155Mbps–OC-3c / STM-1 155Mbps–STS-3 (electrical) 140Mbps–E4-G.703 (electrical) 1 x optical (STM-1 / OC-3) plus 2 x electrical (STS-3 / E4) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm /1550nm single-mode (launch power -3dBm min) DEMUX – INPUT SIGNALS Input signal type Number of inputs Optical 155Mbps–OC-3c / STM-1 155Mbps–STS-3 (electrical) 140Mbps–E4-G.703 2 x electrical (STS-3 / E4) plus 1 x optical (STM-1 / OC-3) PINFET (-32bBm sensitivity) DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max) 270Mbps DVB-ASI–EN50083-9 4 x 270Mbps plus 2 x loop-through STS-3 / E4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Power Consumption/ Environmental VPG9155TX/RX Operating temperature Storage temperature Humidity Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects network interface type Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) DEMUX ALARMS (set as either; none, minor or ­­major) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby network input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors ORDERING INFORMATION VPG9155RX-00 ASI DeMux, STS-3 VPG9155RX-OE ASI DeMux, STS-3 + STM-1/OC-3c Pinfet receiver VPG9155TX-00 ASI Mux, STS-3 VPG9155TX-SFP-EO ASI DeMux, STS-3 + STM-1/OC-3c laser Please refer to the SFP Options data sheet for SFP selection. <20W (All options) 0 °C to + 50 °C -10 °C to + 70 °C 20%–80% RH, non-condensing Element Management / Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects network interface type Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) network-electronics.com | 91 BRAVONET 1.3 ASI Multiplexer/Network Adapter VPG9345 DS3/E3 DVB-ASI TS Multiplexer – Bandwidth Optimizer The VPG9345 MUX/DEMUX is one of many DVB-ASI and SDI networking products in the VPG9500 series. These products form a layered approach to multiplexing and network interfacing from E3/DS-3, OC-3, to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. Designed with the service provider in mind, the VPG9345 manages, controls and protects each TS individually, enabling multiple customers to be served on a single 34Mbps or 45Mbps circuit. • Multiplexes four DVB-ASI inputs into one DS3 (45Mbps) or E3 (34Mbps) output • Maximizes ASI payload capacity (up to 43.8Mbps over a 45Mbps network) • Inputs can be switched to any output • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Each input TS is assigned conditional access codes (2 layers) for secure content delivery 92 | network-electronics.com BRAVONET ASI Multiplexer/Network Adapter 1.3 VPG9345 MUX – INPUT SIGNALS Input signal type Maximum Payload Number of inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI* 270Mbps DVB-ASI–EN50083-9 or ASI*, containing data from 800kbps up to 43.8Mbps DS3 43.8Mbps E3 33.9Mbps 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes. MUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical 45Mbps–DS3 (B3ZS) 34Mbps–E3 (HDB3) 2 x electrical plus 1 x optical (where fitted) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm / 1550nm single-mode (launch power -3dBm min) CWDM or DWDM DEMUX – INPUT SIGNALS Input signal type Number of inputs Optical (optional) 45Mbps–DS3 (B3ZS) 34Mbps–E3 (HDB3) 2 x electrical plus 1 x optical (where fitted) PINFET (-32dBm sensitivity) DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max) 270Mbps DVB-ASI–EN50083-9 4 x 270Mbps plus 2 x loop-through DS3 / E3 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Power Consumption/Environmental VPG9345TX/RX Operating temperature Storage temperature Humidity <20W (All options) 0 °C to + 50 °C -10 °C to + 70 °C 20%–80% RH, non-condensing Element Management/Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects network interface type Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) MUX ALARMS (set as either; none, major or minor) Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects network interface type Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) DEMUX ALARMS (set as either; none, minor or ­m ajor) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby network input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors ORDERING INFORMATION Contact factory for ordering information. network-electronics.com | 93 BRAVONET 1.3 ASI Multiplexer/Network Adapter VPG9500 SDI/DVB-ASI TS Multiplexer – Sub-Multiplexer/Bandwidth Optimizer The VPG9500 MUX/DEMUX interoperates with other VPG products to form a layered approach to multiplexing and network interfacing ranging from E3/DS3, OC-3 to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPG9500 can be used as a companion card with the other family members performing the function of submultiplexing for ASI bandwidth optimizing or multiplexing into SDTI for adapting to fiber metropolitan or SDI long-distance networks. • Multiplexes four DVB-ASI inputs into one 270Mbps ASI or SDTI (SMPTE 305) output • Mainly used as a Sub-Mux to increase the number of TS inputs to VPG9345, VPG9155 or VPG9555 • Inputs can be switched to any output • Used with VPG 6000/6200 chassis under standard or AEMS (Advanced Element Management System) • Each input TS can be up to 178Mbps • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Reed-Solomon checking for each input and output • Each input TS is assigned conditional access codes (2 layers) for secure content delivery 94 | network-electronics.com BRAVONET ASI Multiplexer/Network Adapter 1.3 VPG9500 MUX – INPUT SIGNALS Input signal type Maximum Payload Number of Inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI* MUX ALARMS (set as either; none, major or minor) 270Mbps DVB-ASI–EN50083-9, or ASI*, containing data from 800kbps up to 178Mbps SDTI 178 ASI* 178 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes MUX –OUTPUT SIGNALS Output signal type Number of Outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical ASI* 270Mbps ASI*, or SDTI plus optical (where fitted) containing data up to 179.5Mbps 2 x electrical plus 1 x optical (where fitted) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm /1550nm single mode (launch power -3dBm min) Submux ASI Packets 192/208 bytes DEMUX – INPUT SIGNALS Input signal type Number of Inputs Optical 270Mbps ASI*, or SDTI plus optical (where fitted) 2 x electrical plus 1 x optical (where fitted) PINFET (-32bBm sensitivity) DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI* 270Mbps DVB-ASI 4 x 270Mbps plus 2 x 270Mbps input loopthrough SDTI 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects ASI or SDTI Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) DEMUX ALARMS (set as either; none, minor or ­m ajor) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby 270Mbps input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors ORDERING INFORMATION VPG-9500-TX ASI SubMux Card VPG-9500-RX ASI SubDeMux Card Power Consumption/ Environmental VPG9500TX/RX Operating temperature Storage temperature Humidity <20W (All options) 0 °C to +50 °C -10 °C to +70 °C 20%–80% RH, non-condensing Element Management / Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects ASI or SDTI Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) network-electronics.com | 95 BRAVONET 1.3 ASI/SDI 270 Multiplexer/Network Adapter VPG9000 OC-12/STM-4 SDI/SDTI/DVB-ASI ATM Multiplexer VPG9000 TX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter DVB-ASI Source DVB-ASI Source Stream Processing Stream Processing Multiplexer Processing and Output Formatting Line 1 Line 2 OC-12/STM-4 Laser TX STS-12C (Electrical) OC-12C/STM-4 VPG9000 RX DVB-ASI Multi-Channel DS3 / E3 Telecom Adapter STS-12C (Electrical) OC-12C/STM-4 (Optical) Line 1 (Main) Line 2 (Standby) PINFET RX OC-12/STM-4 Demultiplexer Processing and Output Decoding DVB-ASI Receiver DVB-ASI Receiver The VPG9000 622Mbps SDH/SONET Video Multiplexer is a time division multiplexer that has been engineered to combine two 270Mbps video tributary signals onto an OC-12/STM-4 carrier. Each 270Mbps tributary may be formatted as an SDI, SDTI or DVB-ASI signal, enabling the simultaneous transport of multiple compressed and uncompressed digital video signals. • Designed for transporting SDI video signals over a SONET/SDH infrastructure • Multiplexes two uncompressed 270Mbps • SMPTE 259M/ITU-R 601 feeds into 622Mbps • ATM compatible transport interface • Tributary interfaces allow remote fiber-optic or network connection to the backbone multiplexer • Accommodates all VPG audio and format conversion modules • Optional wavelength multiplexing permits up to four SDI signals on the same fiber • Advanced Element Management System with EDH support 96 | network-electronics.com BRAVONET ASI/SDI 270 Multiplexer/Network Adapter 1.3 VPG9000 GENERAL Input signal types No. of channels Advanced Element Management 270Mbps SDI (SMPTE 259M), SDTI (SMPTE 305M), or DVB-ASI (EN50083-9) Two 270Mbps Electrical (Coaxial) Input/output levels 800 mVpp, with loopthrough capability Input impedance 75 Ohm Output impedance 75 Ohm, dual outputs Cable equalizer max. lth. 300m of Belden 8281 cable 270Mbps Optical Wavelength Coding 1310nm or 1550nm Scrambled or non-scrambled Fiber type Launched power Received sensitivity Maximum input Singlemode -3dBm ±1dB -32dBm, typ. –1dBm for 10-9 BER External Network Reference Clock Consult factory for options. Link Data rate 622.08Mbps Physical interfaces Electrical STS-12c compliant Optical OC-12c/STM-4 compliant Ordering Information Power Consumption VPG9000TX Optical Option Status, control, and alarm messages can be sent to the element management software. These messages include: VPG9000TX Status Module present/absent Option(s) present/absent Module location/ID/serial number Control Set module location/ID Laser enable Enable/disable scrambling Alarm Loss of video input Video errors (EDH support) Module fail Optical source fault/bias deviation (link) Optical power fault/low light fault (SDI) VPG9000RX Status Module present/absent Option(s) present/absent Module location/ID/serial number Control Set module location/ID Laser enable Enable/disable descrambling Alarm Loss of link Video errors (EDH support) Module fail Optical power fault/low light fault (link) Optical source fault/bias deviation (SDI) <25W <1W per module VPG9000TX-00-21 ATM mux card, OC-12/STM-4 VPG9000RX-00-20 ATM demux card, OC-12/STM-4 Environmental/Compliance Operating temperature 0 °C to +50 °C Storage temperature -10 °C to +70 °C Humidity 20%–80% RH, non-condensing EMC Compliance FCC, CE Safety Compliance UL, CSA, CE network-electronics.com | 97 BRAVONET 1.3 ASI/SDI 270 Multiplexer/Network Adapter VPG9500 SDI/DVB-ASI TS Multiplexer – Sub-Multiplexer/Bandwidth Optimizer The VPG9500 MUX/DEMUX interoperates with other VPG products to form a layered approach to multiplexing and network interfacing ranging from E3/DS3, OC-3 to OC-12 rates. With the most efficient use of bandwidth available, these products are designed to squeeze the maximum number of channels into a given capacity. The VPG9500 can be used as a companion card with the other family members performing the function of submultiplexing for ASI bandwidth optimizing or multiplexing into SDTI for adapting to fiber metropolitan or SDI long-distance networks. • Multiplexes four DVB-ASI inputs into one 270Mbps ASI or SDTI (SMPTE 305) output • Mainly used as a Sub-Mux to increase the number of TS inputs to VPG9345, VPG9155 or VPG9555 • Inputs can be switched to any output • Used with VPG 6000/6200 chassis under standard or AEMS (Advanced Element Management System) • Each input TS can be up to 178Mbps • Individual channel bandwidth ceiling provides total control over capacity available to client (to a resolution of 0.1Mbps per TS) • DVB validity check (PID, PAT, PMT, ES and SES) • Reed-Solomon FEC can be applied to each ASI TS for reliable MPEG-2 transmission • Reed-Solomon checking for each input and output • Each input TS is assigned conditional access codes (2 layers) for secure content delivery 98 | network-electronics.com BRAVONET ASI/SDI 270 Multiplexer/Network Adapter 1.3 VPG9500 MUX – INPUT SIGNALS Input signal type Maximum Payload Number of Inputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI* 270Mbps DVB-ASI–EN50083-9, or ASI*, containing data from 800kbps up to 178Mbps SDTI 178 ASI* 178 4 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets192/208 bytes MUX – OUTPUT SIGNALS Output signal type Number of Outputs Input/output levels (elec) Input impedance (elec) Output impedance (elec) Optical ASI* 270Mbps ASI*, or SDTI plus optical (where fitted) containing data up to 179.5Mbps 2 x electrical plus 1 x optical (where fitted) 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 1310nm /1550nm single mode (launch power -3dBm min) Submux ASI Packets 192/208 bytes DEMUX – INPUT SIGNALS Input signal type Number of Inputs Optical 270Mbps ASI*, or SDTI plus optical (where fitted) 2 x electrical plus 1 x optical (where fitted) PINFET (-32bBm sensitivity) DEMUX – OUTPUT SIGNALS Output signal type Number of outputs Input/output levels Input impedance Output impedance Cable equalizer (max) ASI* 270Mbps DVB-ASI 4 x 270Mbps plus 2 x 270Mbps input loopthrough SDTI 800mV(pk-pk) 75 Ohm, with loop-through capability 75 Ohm, dual outputs 200m of Belden 8281 cable Submux ASI Packets 192/208 bytes Power Consumption/ Environmental VPG9500TX/RX Operating temperature Storage temperature Humidity <20W (All options) 0 °C to +50 °C -10 °C to +70 °C 20%–80% RH, non-condensing Element Management / Alarms MUX CONTROLS Input rate setting Ch 1 to 4–Input bit rate ceiling, set to a resolution of 0.1Mbps RS FEC Ch 1 to 4–Add / don’t add DVB checking Ch 1 to 4–Check for PID, PAT, PMT, SES or ES errors DVB error threshold Sets thresholds for alarms Output mode Selects ASI or SDTI Optical Laser On or Off (where fitted) Channel ID codes Ch 1 to 4–Sets each TS’s conditional access codes (2) MUX ALARMS (set as either; none, major or minor) Card fail Card fault Laser fail Optical module fault Input loss Ch 1 to 4–no input Input rate violation Ch 1 to 4–allowable input bit rate exceeded Configuration error Wrong input type selected DVB error Channel 1 to 4–RS, PID, PAT, PMT, SES or ES errors DEMUX CONTROLS Standby protection switch Enable or disable automatic network standby switching Optical loss only switch Enable or disable switching to main electrical input when optical input is lost Switch persistence Error persistence to enable protection switch to operate Input mode Selects ASI or SDTI Mode selected Electrical or optical BER threshold Sets BER alarm threshold Non-Consec. error Network error threshold Channel ID codes Ch 1 to 4-–Sets each TS’s conditional access codes (2) DEMUX ALARMS (set as either; none, minor or ­m ajor) Card fail Card fault Optical loss Input power threshold too low Input loss Loss of frame alignment Configuration error Ch 1 to 4–Error in data type or conditional access code Input errors Ch 1 to 4–Rate exceeds programmed thresholds Standby input selected Standby 270Mbps input is being used by DEMUX DVB error Channel 1 to 4–RS, SES errors ORDERING INFORMATION VPG-9500-TX ASI SubMux card VPG-9500-RX ASI SubDeMux card network-electronics.com | 99 BRAVONET 1.3 ASI/SDI Protection Switching VPG7700 ASI/SDI Dual-Channel Intelligent Slipless Switch Using patented techniques, the VPG7700 ASI/SDI Dual-Channel Intelligent Slipless Switch provides full transport stream protection for digital television networks. With comprehensive TR 101 290 real-time analysis, the quality of both the primary and backup transport streams is available for any switching decisions. By performing feed-forward switching, TS packet alignment is guaranteed throughout the switching process. Unique patented packet and clock synthesis with programmable duration can also be enabled to bridge disruptions to both transport streams. • Two fully independent DVB-ASI/SDI switches per card. • Dual inputs and dual outputs on each switch. • Patented, packet slipless switching techniques with look ahead buffering to maintain TS synchronization. • Discontinuity flag set on switching. • Byte and packet stuffed ASI modes supported. • Accommodates any size TS between 850Kbps and 160Mbps. • 75 ohm coaxial interfaces and two buffered monitor points per switch. • Incoming stream analysis with RS Forward Error Correction verification. • 188 to 204 byte packet conversion capability. • Comprehensive switching algorithms with 1 second, 1 minute and 10 minute windows. • Proactive switching on loss of signal, TS sync loss and error conditions. • Reactive switching on long term error conditions. • Patented packet and clock synthesis for bridging discontinuous traffic. 100 | network-electronics.com BRAVONET ASI/SDI Protection Switching 1.3 VPG7700 Operation Front Panel The VPG7700 switch is used to provide intelligent slipless switching of ASI transport stream packets. It provides unequalled network redundancy protection and is almost insensitive to differential delays between paths as it operates to ensure packet alignment and continuity. In the single-redundant mode of operation, the VPG7700 contains two fully independent channels that can be used to protect two individual transport streams. In the dual-redundant mode, the product can be crossconnected with another VPG7700 to provide both hardware and power feed redundancy. In both modes of operation, the element management interface is used to select the switching criteria, which can extend from simple loss of signal to profile switching based on TR 101 290 analysis. Packet synthesis can be enabled to maintain packet continuity during disruptions to both streams, which is not uncommon if the transport stream is switched prior to entering the transport network. The packet synthesis duration is programmable up to ten seconds. Specifications The VPG7700 supports two separate modes of operation; DVB-ASI mode and SDI mode. DVB-ASI Interface EN50083-9 Measurement TR 101 290 SDI SMPTE 259M SMPTE RP 165 Alarm Conditions Fixed Alarms DVB-ASI Mode SDI Mode Loss of signal Loss of signal Communication fail Communication fail Card fail Card fail Alternative input selected Alternative input selected Configuration error Configuration error Programmable Alarms DVB-ASI Mode SDI Mode DVB errors TRS errors DVB SES 1 minute EDH errors DVB SES 10 minute EDA errors RS errors IDA errors Continuity error Freeze frame Linearity error Audio missing PID profile mismatch Audio silence Alarm Conditioning Each alarm condition can be programmed to different levels of severity and switching can be withheld until a preprogrammed persistence of an alarm condition is reached. In this way, chattering and unwanted switching conditions are avoided. Severity levels Disabled, log only, information, warning, minor, major, critical Persistence Persistence may be set to any value and is used to filter unwanted short-duration alarms. Indicators – LEDs · Power present (Yellow) · Card fail (Red) · Channel present 1A (Green) · Channel present 1B (Green) · Channel present 2A (Green) · Channel present 2B (Green) · Alarm 1A (Red) · Alarm 1B (Red) · Alarm 2A (Red) · Alarm 2B (Red) Monitor Points Four buffered 75-ohm SMC connectors are provided on the front panel to monitor the main and alternate outputs of each channel. Element Management The VS7700 is compatible with the VPG6000 BRAVOnet™ AEMS (Advanced Element Management System). This is a Web browser based monitoring and control system with comprehensive SNMP support. The following can be controlled via the network management interface: Configuration ASI/SDI Switching mode of operation Force 188 output PID profile Auto reversion time Packet synthesis timeout Alarms Priority level (see alarm severity table) Persistence time Hold time These are all programmed through the Web page. Their values depend on the network configuration and conditions. Preset values can be loaded from a configuration file. All configurations can be changed through the “Edit Config” Web page, and its associated pages. History Logging A deep history log of all events is maintained and accessible through the History Web page. The Alarm Statistics page provides “errored seconds” analysis for each alarm event. SNMP Compatibility An SNMP MIB conforming to SNMP V2 and V3 is supported through the VPG AEMS management platform. Ordering Options The VPG7700 is supplied with a connector panel. There are no specific configurations of this product. The ordering code is VPG7700 ASI/SDI dual channel slipless switch. network-electronics.com | 101 The Concept Since the conception of Network Electronics, we have provided affordable, compact, energy efficient, high quality products. This philosophy is very much alive, and we continue to bring excellent products with advanced design into the market. Our product portfolios, VikinX and Flashlink, have set new industry standards and have achieved many awards for modern design and excellent engineering year after year. VikinX Compact VikinX Sublime Vikinx The VikinX products represent our routing range and have three different entry points ... The industry standard VikinX Compact series, for over 10 years, is the router for both entry level and broadcasters. The VikinX Sublime series provides the next generation technologies including Ethernet control, 3Gbps Single Link support for 1080P High Definition TV, and ultra low power consumption. VikinX Sublime is the router for all users appreciating these features – including top end broadcasters. ... and the flexible VikinX Modular series, joined by the newest member, the 256x256 High Definition router. All these series interconnect; sharing software configuration, control and monitoring applications, providing legacy and growth paths appreciated by both our new and existing customers. Network Electronics is proud of our ability to offer a complete range of routing solutions. Network Electronics is a strong, trusted partner to our customers around the world. VikinX Modular Broadcast and Telco formats covered in our routing products: 3GHD, HD, SDI, AES, ­Analog Video & Audio, Time code, RS-422, 34/45 Mbps, 140-155 Mbits and G703. Flashlink The Flashlink product range covers all signal processing and distribution equipment for the fiberoptic domain and comes with several innovative housing solutions. The processing and distribution products are capturing market prominence with a complete line of products that will do the job that they are intended for, simply and straight forward and maintenance free with a technical passion that makes this high performance range stand out from the crowd. It could be simply video or audio distribution or change over switching or frame synchronizers, what ever your product desires are we can satisfy your wishes. Flashlink is known for being well engineered, simple for the user and ultra reliable with a cost performance advantage. For many years the Flashlink product range has led the industry and has become the industry standard for fiber transport systems in the broadcast and video transport arenas. From a simple one channel fiber system up to 40 channels of uncompressed data or broadcast signal formats on one fiber, Flashlink is known world wide for its innovative transport system and control system possibilities including SNMP on all products. Synchronisation, Delay, Multiplexing, Converters, Distribution amplifiers, change over switching HD-SDI, SD-SDI, AES, Analog Video and Audio, 10/100/1000Mbps Ethernet, RS-422, GPIO, L-Band, TDM, SDI Time Division Multiplexers, SDH/SONET Up to STM16/OC-48, DVB-ASI, fiber Channel, IP Transport systems for Video over IP, 3R Regeneration, CWDM and DWDM system platforms and many others network-electronics.com | 103 Signal Transport, Processing and Distribution Rack mount, studio facilities, OB vans: Flashlink FR-2RU 19” frame for up to 10 modules and dual power supply Mobile use, outside broadcast (OB), events MOT-BOX, lightweight rugged housing for Flashlink FR-2RU frame Stand-alone: N-BOX single module frame Signal formats supported by Flashlink… • Uncompressed SD-SDI/HD-SDI/3G-SDI • NTSC/PAL • Analog audio and video • AES and MADI • E4, STM1-16, OC3-48 • DVB-ASI, M2S (Divicom), SMPTE 310M, SDTI • RS-422, GPI/GPO • 10/100/1000Mbps Ethernet • Fiber Channel • Analog L-band signals Functions included… • SD-SDI/HD-SDI and AES embedding/de-embedding with analog signal support • SD-SDI and HD-SDI 2x1 changeover modules • Distribution amplifiers in all flavours • HD-SD down-conversion • Electrical to Optical and Optical to Electrical media conversion • Fiber optical signal distribution and automatic protection switching • Optical multiplexing, WDM, CWDM and DWDM • 3R-regeneration of optical signals with wavelength scheme swapping • Electrical multiplexing, TDM • AES to analog audio and analog audio to AES conversion • SDI to NTSC/PAL encoding, 10-bit and 8-bit version • NTSC/PAL to SDI decoding • Line and frame synchronization • System Controller with web and SNMP support SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Flashlink Overview See for yourself how you can benefit from the extensive features of the Flashlink system: Feature Function Benefit Multiformat Broadcast, Telecom and Datacom Dedicated modules for different signals Offer one or more of these services with platform formats, the MR-TR range supports all potential future expansion with the same formats optically platform Multi mode fiber on receivers allow for use Install new fiber cables or use existing with single or multi mode fibers infrastructure GYDA-SC System Controller with TCP/IP web Dynamic web site generation by system Use web interface for full access to installed interface controller gives access to remotely control system from control site, no special software and configure system needed GYDA-SC operates as an SNMP agent Easy integration into larger control systems Single mode and multi mode compatible All Flashlink modules have Simple Network Management Protocol support via GYDA-SC Extensive monitoring possibilities using SNMP GPI output, front card LEDs and RS-422 Tailor monitoring to existing studio needs control Hot-swappable architecture Change modules without powering down Little or no down-time on running services system Modular and easily expandable system 10 slots per Frame, hot swappable, add Grow with the system, no need for huge modules without powering down on-air initial investments frames Supports pathological video patterns without Extremely good low frequency response Robust signal transport system Any wavelength scheme, 1310nm and 1550nm, Add the number of wavelengths needed Flexible system design, tailored for specific CWDM and DWDM per fiber according to current needs customer needs Very compact 2RU rack mount solution Industry leading rack size compactness Saves rack space with increased packing scrambling density Dual redundant power supply Load sharing ensures working frame as Lower risk for power loss during critical long as more than one of the two powers operations operate normally AC and/or DC power supply AC and/or DC operation Maximum power redundancy, flexible power sources Extremely low power consumption No fans needed, better reliability Less maintenance, reduced operating cost, longer lifetime network-electronics.com | 105 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Flashlink Housing Flashlink 2RU Frame – Compact and comprehensive FR-2RU-10-2 10 module slots • Mix and match modules according to your needs Flashlink Frame • All cabling at the rear • A fully functioning 16-channel CWDM system in only 2RU with dual converters Easy configuration • Short time to get on air No fans • Low power consumption means that we have removed the most common single point of failure; the fans Two power supply slots AC power AC power supply module 100–260 VAC (PWR-AC15/15/5/5V) DC power (optional) DC power supply module 36–72 VDC (PWR-DC15/15/5/5V) Redundant power (optional) Dimensions 483 x 88 x 178 mm (19”, 2RU) Card slots 10 Power supply slots (reserved) 2 Internal voltages +5V, +15V, –15V Weight approx. 3 kg fully populated ­dependent on module types • Single or redundant, load sharing power supply, AC, DC or a mix HOT-SWAPPABLE ARCHITECTURE • Hot-swapping of modules and power supplies accessible from front means short replacement time • No re-cabling needed for module replacement/ Power Supply for Flashlink Frame re-configuration • No electrical disturbance on other modules during hot-swapping, particularly important in on air situations Comprehensive control and monitoring • Status monitoring through front LEDs, GPI and RS-422 simultaneously Internal power supplies are available in both AC- and DC-versions. Mixed AC/DC operation is possible, when both power supply slots are used for redundancy. An LED in the front shows if the power is active. The internal powers can deliver 30W at ±5V, 15W at +15V and 15W at –15V at the same time. PWR-AC15/15/5/5V Input voltage Output voltages 100-260VAC ±5V, ±15V DC • Address setting of each frame allows for simultaneous control of 8 frames • SNMP – Simple Network Management Protocol support for use with larger Network Management Systems is standard on all modules • GYDA-SC System Controller provides web interface/SNMP for all modules connected to the controller at a remote location • Remote configuration and monitoring saves time and troubleshooting time 106 | network-electronics.com PWR-DC15/15/5/5V Input voltage Output voltages 36-72VDC ±5V, ±15V DC FLASHLINK HOUSINGS N-BOX 2.1 N-BOX is an ultra compact, ruggedized and cost effective housing for the Flashlink modules. The same Flashlink modules and backplanes can be used in the Flashlink FR-2RU-10-2 frame and in N-BOX. This interchange ability allows for easy migration and system expansion from N-BOX to the Flashlink FR-2RU-10-2 frame in case of future expansion needs. All Flashlink modules have the same feature set regardless of housing. Distribution Amplifiers Embedders / De-embedders Video Converters Audio Converters Synchronisation Modules Automatic Changeover Modules EO and OE Converters Datacom Interfaces HD Downconverters N-BOX-SH1RU N-BOX-PL1 1RU Shelf Mounting Plate 1RU shelf for up to 4 x N-BOX, including 3 front panels for empty Mounting plate for N-BOX, allows wall, on-table, under-table slots mounting, complete with screw set N-BOX-PL2 N-BOX-PL3 Angled Mounting Plate Interconnecting Plate Angled mounting plate for N-BOX, allows wall, on-table, under-table Interconnecting plate for N-BOX, allows stapling of N-BOXes, mounting, complete set with 2 plates and screws complete set with 2 plates and screws network-electronics.com | 107 FLASHLINK HOUSINGS 2.1 MOT-BOX Flashlink MOT-BOX – Extremely lightweight mobile transport enclosure MOT-BOX is the most compact and lightweight mobile transport enclosure available. Robust fiber cable The MIL specified tactile fiber with hermaphroditic connectors has 4 fibers and can be delivered in lengths of 150m, 250m or 500m. The MOT-BOX houses one Flashlink 2RU frame with modules for optical extremely robust fiber cable ensures a reliable fiber connection. transport, signal processing and distribution. RUGGEDized DESIGN Multiple fibers, multiple signals The 4 fibers allow uni- or bi-directional video with associated audio With its ruggedized design it is the logical choice for all mission- and RS-422 signals. By utilising TDM (electrical multiplexing) and critical mobile and outside broadcast applications. CWDM (optical multiplexing) the number of signals can be increased IDEAL FOR OUTSIDE BROADCAST EVENTS to meet specific demands. Network Electronics is known as the supplier of routing and signal HD-SDI, SD-SDI or analog video, the choice is yours, MOT-BOX is the transport solutions to all major sports events in the world. Events like ideal companion for mobile and outside broadcast productions. the Olympic Games, FIFA World Cup, and Skiing World Cups have been broadcasted to millions of viewers with Network Electronics equipment. The MOT-BOX is the ideal solution for coverage of these MOT-BOX applications and any other outside broadcast event. • The most compact and lightweight 3RU mobile transport housing Minimised spares holding • Holds a Flashlink 2RU frame The MOT-BOX can be pre-configured to meet specific requirements, • AC and DC power supply option and also shared among several vans for e.g. news gathering, • Supports the full set of Flashlink modules substantially lowering the investment cost. • Ruggedized connector backplanes for tough use Since the modules of the mobile system are exactly the same as you • MIL specified tactile fiber cable reels with 4 fibers (optional) use in the studio, the number of spares can be held at a minimum. • Breakout panels to various connectors like SC/PC or E2000 Lightweight • Only 12kg fully populated with redundant power supply The MOT-BOX design with rugged connectors like XLRs for audio and a hermaphroditic (both male and female) fiber connector holding 4 fibers allows for use in harsh environment. The low weight gives maximum mobility, two person lift is a thing from the past. One person can easily carry the MOT-BOX alone. In a fully loaded van close to exceeding weight limits, the low weight of the MOT-BOX will be appreciated. 108 | network-electronics.com available available FLASHLINK HOUSINGS MOT-BOX 2.1 MOT-BOX AC power MOT-BOX MOT-BOX Backplane Modules DC power AC Power PWR-AC15/15/5/5V AC power supply module 100-260 VAC DC Power (optional) PWR-DC15/15/5/5V DC power supply module 36-72 VDC Dimensions (WxDxH) 530 x 570 x 215 mm with front and rear covers. 530 x 425 x 215 mm w/o front and rear covers Weight Including PSU and 10 modules: <12 kg Card slots 10 Power Supply slots 2 Internal voltages +5V, -5V, +15V, -15V Fiber connector MB-FR-1RU Ethernet 1RU frame with front mounted 4-Fiber expanded beam hermaphroditic MIL connector, rear panel with 4 x SC-PC connector. Space for up to 5 MIL fiber connectors. MB-MIL-4SC Mil connector to 4xSC breakout for use with MB-FR-1RU MB-BP-00 Blindplate MB-BP-01 Backplane for ADC-AES MB-BP-02 Backplane for DAC-AES, DA-AA or DA-AES MB-BP-03 Backplane for SDI-OE, SDI-EO, HD-OE or HD-EO Fiber hermaphroditic expanded beam connector MB-BP-04 Backplane for DA-SDI ,DA-SDI-NRC, DA-HDSDI, ADC-SDI, ADC-SDI-CC, DAC-SDI, SDI-TD MB-BP-05 Backplane for AV-MUX The optical fiber is fully protected behind a hard-coated expanded beam lens and forms a no-contact connection. Dirt and contamination can be simply cleaned MB-BP-06 Backplane for AAV-MUX or AVA-MUX with a cloth (or your shirt sleeve) MB-BP-07 Backplane for AV-DMUX, AAV-DMUX, AVA-DMUX or AV-HD/SD-XMUX MB-BP-08 Backplane for D422-MG (RS-422) MOT-BOX Reels with cables Singlemode tactical 4-Fiber cable terminated with expanded beam hermaphroditic MIL fiber connector MB-Reel-150 Reel with 150m MB-Reel-250 Reel with 250m MB-Reel-500 Reel with 500m MB-BP-09 Backplane for D422-MD (GPI in and out) MB-BP-10 Backplane with 4x SC-PC fiber connector including 4x0.5m fiber patch cord MB-BP-11 Backplane with 4x E2000/PC fiber connector including 4x0.5m fiber patch cord network-electronics.com | 109 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 System Controller for Flashlink GYDA-SC Web and SNMP based Control, Monitoring and Configuration – Element manager for Flashlink • Controls up to 8 Flashlink frames • 10/100Base-T Ethernet interface with TCP/IP protocol • Standard web browsers to configure and monitor Flashlink. • Log-files are stored on compact flash card • User-friendly graphical user interface • Support for VikinX Compact and VikinX Sublime router control • SNMP system with alarm and trap filtering implemented for all modules • FTP service for online upgrades • No annual licence fee • Visualize system condition in Visio drawings (option) And many more ... Example of web interface in GYDA-SC System CPU Memory 400MHz Intel PXA255 StrongARM 64MB SDRAM 8MB Flash Electrical Interfaces 2 x RS-232 or RS-422 control ports on DB9F conforming to IBM PC (RS-232) or SMTPE 207M (RS-422) 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable Power Consumption +5V DC / 3W 110 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION System Controller for Flashlink 2.1 Example of alarm list in GYDA-SC Site 3 Site 2 ETH SDI/ASI 2 SDI/ASI 2 CWDM fibre CWDM Site 1 ETH SDI/ASI 2 SDI/ASI 2 CWDM GYDA-SC CWDM 4 SDI/ASI 4 4 fibre SDI/ASI SDI/ASI ETH CWDM fibre 4 SDI/ASI GYDA-SC Site 4 Site 5 ETH SDI/ASI 2 SDI/ASI 2 GYDA-SC fibre GYDA-SC ETH SDI/ASI 2 SDI/ASI 2 GYDA-SC 4 fibre 4 CWDM 4 SDI/ASI CWDM CWDM 4 SDI/ASI CWDM CWDM SDI/ASI SDI/ASI ETH Flashlink gives you the possibility to use ethernet over fiber. With this solution you can monitor and control the whole system with GYDA-SC Remote monitoring and control Online monitoring Use internet technology to connect remote sites together, enabling GYDA-SC will continuously monitor the system for all vital complete control of all your Flashlink equipment from all locations. parameters, like signal quality and power supply voltages. The web Sending technicians to remote locations for error tracing becomes page is automatically updated with the latest information. a thing of the past. Error correction is faster, saving money and providing better availability to the end user. Configuration All cards can be configured through GYDA-SC. Some cards have advanced configuration possibilities which are straight-forward with GYDA-SC. The configuration is stored in GYDA-SC securing on-the-fly card replacements with minimum down time. Alarms GYDA-SC and SNMP applications Logging GYDA-SC has advanced alarm handling, where an operator can get a “system health All Flashlink modules will generate SNMP history with date and time of each event. condition” report. The alarms will not be traps according to user settings in the The log will be stored on the flash card, and removed from the alarm list until they are interface configuration section on the can not be cleared without a reset, making acknowledged by an operator. An alarm GYDA-SC. GYDA-SC is also able to interface it ideal for error tracing «a posteriori». can be acknowledged while it still is active, and control cross point settings of the The log file can easily be exported to your it will then be removed automatically from VikinX Compact routers, providing cross computer for future reference the alarm list, the moment the cause of the point information via SNMP or the web alarm is resolved. interface. Example of alarms: This feature gives you the possibility to to all users on the network. GYDA-SC • Card removed have: allows anonymous/open access to the card • Loss of signal • Audible alarms information. Two extra levels of protection • Laser failure • Alarm notification on e-mail (observer and operator) can be enabled for • Supply voltage out of range • Browser pop-up on module pages with situations where anonymous access to the The logging facility gives the user a system Availability and Password protection In the default setup, GYDA-SC is available • GPI input System visualization alarms system, alarm and log tabs is not wanted. • Trap relay Manuals and technical documentation As an optional feature you can use your are always available since GYDA–SC has a Visio system drawings to visualize the complete collection of all Flashlink manuals connection and the system status in GYDA- in Adobe PDF format. SC. network-electronics.com | 111 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Modular Distribution Amplifiers DA-3GHD Multi Rate 3GHD-SDI Distribution Amplifier HD1 HD2 HD3 Equaliser HD4 HD input HD5 Bypass HD6 HD7 HD8 Microcontroller Remote Control Electrical Outputs Connectors Output Return loss 75 ohm BNC - < -15dB, 5MHz -1.5GHz - < -10dB, 1.5GHz - 3GHz Output signal level 800mV +/- 10% Output signal rise / fall time 20% – 80% - SD limit: [0.4ns – 1.5ns]; <0.5ns rise/ fall var. - HD limit: < 270ps, <100ps rise/fall var. - 3G HD limit: <135ps, <50ps rise/fall var. Amplitude overshoot <10% Polarity - Output 1,3 5 & 7: Non inverting electrical - Output 2, 4, 6 & 8: inverting electrical Output timing jitter - SD: <0.2 UI - HD: <1 UI - 3G HD: <1UI Output alignment jitter - SD: <0.15 UI - HD: <0.15 UI - 3G HD: <0.2UI Electrical Inputs Connectors 75 ohm BNC Input Cable Eq. @270Mbps >300m w/Belden 8281, with BER < 10E-12 Input Cable Eq. @1485Mbps >100m w/Belden 1694A, with BER < 10E-12 Input Cable Eq. @2970Mbps >70m w/Belden 1694A, with BER < 10E-12 Input Return loss - < -15dB, 5MHz -1.5GHz - < -10dB, 1.5GHz - 3GHz Jitter tolerance - SD limit: - 10Hz-1kHz: >1 UI - 10kHz – 5MHz: >0.2 UI - HD limit: - 10Hz-100kHz: >1 UI - 100kHz–10MHz: >0.2 UI - 3G HD limit: - 10Hz-100kHz: >2 UI - 100kHz–10MHz: >0.3 UI FeaTures Re-clocking Automatic SD/ HD detection Automatic output slew rate adjustment according to SMPTE-259M and SMPTE292M/ SMPTE424M Selectable loop bandwidth - Low: 3GHD = 3.5Mhz, HD = 1.5MHz, SD = 0.32MHz - High: 3GHD = 7MHz, HD = 3.5MHz, SD = 0.64MHz Supported clock rates 270, 1483.5, 1485, 2967, 2970Mbps Input equalizer Eq. bypass for non-video formats or low bit rates Supported standards SMPTE SMPTE424M, SMPTE292M, SMPTE259M, SMPTE305M, SMPTE310M DVB-ASI EN50083-9 (on non-inverting outputs) 112 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Modular Distribution Amplifiers 2.1 DA-SDI DA-VA SDI Distribution Amplifier Analog Video Multisignal Distribution Amplifier SDI1 Video1 SDI2 Video2 SDI3 Equaliser SDI4 SDI input Video input Video3 SDI5 Bypass Video4 SDI6 Video5 SDI7 Video6 SDI8 Microcontroller Remote Control Microcontroller • SDI / ASI distribution amplifier • 6 non-inverting outputs, 2 inverting outputs • Re-clocking rates 143, 177, 270, 360, 540Mbps • Configurable reclocker bypass for non-video bitrates • Configurable EQ defeat for low bitrates Electrical Signal Inputs Number of inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization 1 SMPTE 259M 19.4Mbps – 540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz-270MHz) 0 to 300m typical Belden 8281A Electrical Signal Outputs Number of outputs 8 Connector 75 ohm BNC female Signal Level 800mVp-p ±100mV Signal Polarity All outputs non-inverting Impedance 75 ohm nominal Return Loss > 15dB (5MHz-270MHz) Features Re-clocking rates Supported standards 143, 177, 270, 360, 540Mbps SMPTE 259M, 305.2M, 344M, 310M, DVB-ASI EN50083-9 (on non-inverting outputs), AES-3id Configuration Configurable autom. mute or bypass when not locked Input equaliser Bypass for non-video formats Configurable EQ mute GEneral Power +5V DC / 3W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System Remote Control • DC to 200MHz analog video • 6 non-inverting outputs • Also suitable for SDI according to SMPTE-259M Electrical Input Maximum input 2 Vp-p Coupling DC Impedance 75 ohm (switchable to high impedance) Connector BNC Electrical Output Number of outputs 6 Connector BNC Impedance 75 ohm Signal polarity 6 non inverting Analog video Frequency range Return loss Video S/N ratio Differential gain Differential phase Gain 0 to 200 MHz -3dB > 40dB @ 10MHz > 70dB < 0.1 % < 0.1 º 0dB ± 0.1dB 0-15 MHz 0dB ± 0.5dB 0-150 MHz Analog amplifier used for SDI-video (SMPTE 259M) Gain Jitter Return loss Data rate Rise/fall overshoot Rise and fall time Rise/fall time difference 0dB < 700 ps, typ. 250 ps > 15dB @ 270MHz up to 270Mbps < 10 %, typ. 0 % > 400 ps, < 1500 ps, typ. 1000 ps < 500 ps, typ. 100 ps General Power +5V DC / 0.1 W, ±15V DC / 1.9W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System network-electronics.com | 113 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Modular Distribution Amplifiers DA-AES DA-AA Dual Digital Audio Distribution Amplifier Dual Analog Audio Distribution Amplifier AES 1 Output AES 1 Output AES 1 Input ANA 1 Output ANA 1 Input ANA 1 Output AES 1 Output ANA 1 Output Gain Settings AES 1 Output AES 2 Output AES 2 Output AES 2 Input ANA 1 Output ANA 2 Output ANA 2 Input ANA 2 Output AES 2 Output ANA 2 Output Gain Settings AES 2 Output Microcontroller Remote Control Microcontroller • Digital audio distribution amplifier • Configurable as Dual 1x4 or Single 1x8 • Reports signal presence • Supports sample rate from 15 to 96kHz • Supports bit rate from 16kbps to 14Mbps Electrical Input ANA 2 Output Remote Control • Analog audio distribution amplifier • Precision gain settings for -12 to +12dB • Allows mixing of 2 inputs in dual 1x4 mode • For balanced AC signals from 3.3Hz to 400kHz Electrical Input Number of inputs 1 or 2 Standard AES-3 Supported Sample Rate 15-96kHz Signal Amplitude 0.2-7Vp-p Connector DB15 balanced Impedance 110 ohm nominal Number of inputs Connector Impedance Maximum Input Level Common mode rejection 2 DB15 balanced > 10k ohm +25dBu >70dB Electrical Output Electrical Output Number of outputs Connector Signal amplitude Impedance 8 or 4+4 DB25 balanced 4Vp-p ±1Vp-p 110 ohm nominal Number of outputs Connector Frequency response Crosstalk THD+N Impedance Features Configurable dual 1 input to 4 outputs or single 1 input to 8 outputs GEneral Power +5V DC / 0.5W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System 114 | network-electronics.com Maximum Output Level Output voltage balance ratio Output common mode rejection Switched gain tolerance Gain 8 DB25 balanced (Tascam DA88) 20 Hz–80kHz ±0.2dB -100dB > 100dB ref to 20 Hz-20kHz @ 20dBu 40 ohm nominal. Maximum 55 ohm +25dBu >30dB >50dB 0.1dB -12 to +12dB GENERAL Power +5V / 0.1 W, ±15V / 1.9W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Modular Distribution Amplifiers 2.1 DAC-MON SDI Distribution Amplifier w/Monitoring Output CVBS 1 SDI IN CVBS 2 EDH CVBS 3 SDI 1 SDI 2 SDI 3 • 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring • Also available as PAL-M version Digital Serial Input Signal 4:2:2 SMPTE 259M-C, 270Mbps Equalization Automatic Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC Digital Serial Output Signal 4:2:2 SMPTE 259M-C, 270Mbps reclocked Connector BNC Number of outputs 3 Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Analog Output Connector BNC Impedance 75 ohm Formats Composite video, PAL 625/50 or NTSC 525/60 Signal level 1Vp-p Return loss >40dB up to 10MHz Processing Performance Signal path Sampling Video bandwidth SNR 8/10 bits 27MHz 5.5MHz >60dB typical GENERAL Power +5V DC / 2W, -15V DC / 0.6W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) for use with GYDA-SC Control System network-electronics.com | 115 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Embedders/De-embedders Flashlink backplanes for 110 ohm AES3 or 75 ohm AES-3id All Flashlink modules for audio are for 110ohm balanced AES3 audio, but can also be ordered with a backplane for 75ohm unbalanced audio. The tables below show the products and compatible backplanes. Audio embedding v = Factory default backplane x = Alternative backplane BACKPL ANE AV-MUX-C1 AV-MUX-C2 AAV-DMUX-C1 AV-HD-XMUX-C1 AV-HD-XMUX-C2 (110ohm) (75ohm) (110ohm) (110ohm) (75ohm) AV-MUX(-xxT) v x AV-DMUX (-R) v x P ro d u c t AAV-MUX (-xxT) v AAV-DMUX (-R) v AV-HD/SD-XMUX x v x AV-HD/SD-XMUX (-xxT) x v x AV-HD/SD-XMUX (-R) x v x AV-HD/SD-XMUX (-R-xxT) x Audio conversion v = Factory default backplane x = Alternative backplane v BACKPL ANE ADC-AES-C1 ADC-AES-C2 DAC-AES-C1 DAC-AES-C2 (100ohm) (75ohm) (110ohm) (75ohm) v x v x P ro d u c t ADC-AES DAC-AES Alternative backplane Short description (see respective user manual for detailed information) AV-MUX-C2 2 slots, 4x 75ohm BNC i/p and 4x o/p, for AES-3id AV-HD-XMUX-C2 1 slot, 2x 75ohm BNC i/p and 2x o/p, for AES-3id ADC-AES-C2 1 slot, 2x75ohm BNC o/p for AES-3id DAC-AES-C2 1 slot, 2x75ohm BNC i/p for AES-3id 116 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Embedders/De-embedders AV-MUX, AV-MUX-xxT AV-DMUX, AV-DMUX-R Digital Audio Embedder Digital Audio De-embedder AES1 Input SRC I0 AES2 Input SRC I0 AES3 Input AES1 Output AES1 Output AES2 Output AES2 Output AES3 Output SRC I0 AES4 Input EQ Re-clocker EDH 4-ch Multiplexer 4-ch Multiplexer EDH Microcontroller SDI Input EQ Re-clocker EDH 4-ch De-multiplexer 4-ch De-multiplexer Microcontroller Remote Control GENERAL Also available with 75ohm AES-3id backplane SDI Output Remote Control • 4-channel 24-bit AES (8 mono audio) audio de-embedder • EDH in accordance with SMPTE-RP165 • De-embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES outputs • 110ohm balanced and 75ohm unbalanced version available • Optional with optical input (AV-DMUX-R) GENERAL +5V DC / 5.3W DIP Switches/GYDA-SC Front panel LEDs and GYDA-SC SDI input loss, 4 x AES input loss, laser failure, power good AES Audio Input/ Outputs Number of inputs 4 transf. balanced Number of outputs 4 transf. balanced Format AES3-1992 Impedance 110ohm or 75ohm Connector DB25-110ohm and BNC-75ohm Sampling rates Asynchronous to SDI 16-144kHz w/SRC enabled. Isosynchronous to SDI 48kHz SDI Input / Output Data rate NRZ 270Mbps Video Frame rates 50 Hz and 60 Hz Input Equalization Auto. up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC Output rise/fall time typ. 650ps Optical Output (optional) Transmission circuit fiber Light source Optical wavelength (ver. 13T) Optical power AES4 Output SDI Output • 4-channel 24-bit AES (8 mono audio) audio embedder • Automatic insertion of sample rate converters • EDH in accordance with SMPTE-RP165 • Embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES in- and outputs • Allows external sampling rates from 16-144kHz Also available w/SRC enabled with 75ohm • Can be used as 4-CH embedder, 4-CH de-embedder or AES-3id 2-CH de-embedder/embedder backplane • 110ohm balanced and 75ohm unbal. version avail. • Optional with optical output (AV-MUX-xxT) Power Control Monitoring GPI AES3 Output Optical Input AES4 Output SRC I0 Optical Output SDI Input 2.1 Single mode 9/125um F-P/DFB Laser 1310nm ± 40nm -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M Power Control Monitoring GPI +5V DC / 3.7W DIP Switches/GYDA-SC Front panel LEDs and GYDA-SC SDI input loss, 2 x audio group, optical input loss, power good Optical Input (optional) Data rate optical 270Mbps Sensitivity Better than –20dBm typ. Optical wavelength 1200-1620nm Transmission circuit fiber Multi mode 50/125um. Single mode 9/125um ­compatible Connector Return loss >40dB w/SM fiber Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC AES Audio Output Number of outputs 8 transf. balanced Format AES3-1992 Impedance 110ohm or 75ohm Connector DB25-110ohm and BNC-75ohm Sampling rates 48kHz SDI Input / Output Data rate NRZ 143-540Mbps Input Equalization Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC Number of outputs 1 Output rise/fall time typ. 650ps network-electronics.com | 117 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Embedders/De-embedders AV-HD-XMUX / AV-HD-XMUX-r / AV-HD-XMUX-T HD Digital Audio Embedder and De-embedder Embedder features • All-in-one Embedder and De-embedder • Multi-format SD/HD support • Embeds and de-embeds 4 AES signals • AES inputs with sample rate conversion allowing sampling rates from 32 to 192kHz • Sample rate conversion bypass for Dolby E audio • Transformer coupled AES in- and outputs • Accepts 20 or 24 bit audio • RS-422 input for embedding of serial data or GPI information • Uninterrupted transport of AES audio in case of loss of SDI signal • Automatic mute of AES in case of AES errors Compliant to the following Broadcast standards Optical port features • Optional optical input and output providing up to 30dB optical budget (SD) • Supports pathological SDI/HDSDI pattern (checkfield) • 1310nm, 1550nm and CWDM lasers available Formats Standards SD, 270Mbps SMPTE 259M, SMPTE 272M-AC (synchronous audio at 48kHz and extended data packets) HD, 1485 Mbps SMPTE 292M, SMPTE 274M, SMPTE 291M, SMPTE 295M SMPTE 296M, SMPTE 299M AES AES3-1996 Optical SMPTE 297M, SMPTE 292M EDH Compliant to SMPTE-RP165 Audio processor/delay features • Audio matrix and processor allowing group swap, channel shuffle, L/R inversion and channel summing • 4-channel AES variable audio delay line with up to 1.2s delay Other general features • Internal video generator • Audio Test Tone generator • Built-in EDH processor • Backplanes for balanced 110 ohm and unbalanced 75 ohm AES available • GYDA-SC enabled for remote control, status monitoring, error reporting and SNMP support SD / HD Optical Transmitter Optical Receiver optical fiber Re-clocker SDI/HD Input RS422 EDH/ DeSer. Deembed. Embedder EDH/ Ser. EQ Tx • Audio Matrix • Audio Delay • Group swapping • Video Generator • Audio Generator RS422 AES1 SRC AES2 SRC AES2 AES3 SRC AES3 AES4 SRC AES1 AES4 Microcontroller 118 | network-electronics.com SDI/HD Output EQ Audio Processing Rx SD / HD optical fiber Remote Control SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Embedders/De-embedders Measurement conditions Audio Sampling rate Ambient temperature 48 kHz 25 ºC GENERAL Power Control Monitoring EDH processing +5V DC / 3.3W DIP switches, GYDA-SC system controller. GPi Front panel LEDs GYDA-SC system controller and GPI. Full. Received flags are updated, new CRCs are calculated Electrical video input Video Data rate 270Mbps or 1.485Gbps Video frame rate 24p, 50i, 60i, 50p or 60p Hz. Equalization Automatic up to 35dB Impedance 75 ohm Return loss >15dB @1,5GHz Signal level nom. 800mV Connector BNC 2.1 Electrical Video Output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15dB @1.5GHz Signal level nom. 800mV. Rise/fall time (SD) typically 650ps. @270Mbps Rise/fall time (HD) typically 100ps. @1485Mbps Optical video output Transmission circuit fiber Single mode Light source F-P/DFB Laser Optical wavelength ver. 13T 1310nm ± 40nm Optical power: -7.5 or 0 dBm Optical wavelength ver. CxxxxT (16 CWDM wavelength acc. to ITU-T G.694.2) Optical power: 0 dBm Jitter (UI=unit interval) 0.135 UI max. Connector SC/UPC HD/SDI digital serial component video Audio outputs Optical video input Transmission circuit fiber Multi-mode 50/125 um Optical wavelength 1200–1620nm Maximum Optical power 0 dBm Minimum Optical power HD/SD –25/–30 dBm Return loss Better than 27 dB typ. Maximum reflected power 4% Connector SC/UPC Audio Inputs Number of AES inputs Audio data rate 4 32 kHz to 192 kHz, converted to 48 kHz if not isochronous to the video input signal Impedance (C1) 110 ohm transformer balanced Connector (C1) 25 pin D-sub. (4 Inputs + 4 outputs) Impedance (C2) 75 ohm unbalanced Connector (C2) 4 x BNC Embedded audio word length: 24 bits Embedded audio Channel status: As received when synchronous. Otherwise fixed Sample rate converter dynamic range: 140 dB(A) Number of AES outputs Audio data rate Impedance (C1) Connector (C1) Impedance (C2) Connector (C2) 4 48 kHz 110 transformer balanced 25 pin D-sub 75 ohm unbalanced 4 x BNC data outputs Number of RS-422 Outputs 1 Connector RJ45 gpi outputs Signals Power status good, video optical input loss, video electrical input loss Connector RJ45 Signal type Open drain transistor with free-wheel diode Positive signal Valid video output Maximum voltage 100 V Maximum current 150 mA data Inputs RS-422 1 Connector RJ45 UART Baud rates 115200, 34800 Data length 5 to 8 bits Parity None, odd or even Stop bits 1, 1.5 or 2 bits GPI mode Raw data sampling frequency 93750bps (supports baud rates up to 19200) AAV-DMUX-C1: AES-3 (110 ohm) AV-HD-XMUX-C1: AV-HD-XMUX-C2: AV-HD-MUX-C2: Transponder AES-3ID (75 ohm) AES-3ID (75 ohm) AV-HD-XMUX-C3: 1 optical input, 2 SDI outputs and 4 BNC AES-3ID outputs network-electronics.com | 119 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Embedders/De-embedders AAV-MUX, AAV-MUX-xxT AAV-DMUX, AAV-DMUX-R Analog Audio Embedder Analog Audio De-embedder Bal. Input Gain Setting A/D Optical Input ANA1 ANA2 ANA3 Reclocker deserialiser SDI ANA4 SDI Input Audio 2R Audio 2L De-embedder Audio 1R Audio 1L Optical Output EQ Re-clocker 4-ch Multiplexer EDH EDH Microcontroller SDI Output Remote Control • 4 channel analog audio embedder • 24 bit converters 107dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments with DIP switches • EDH insertion and handling • 20 or 24 bit embedding • Optional with optical output (AAV-MUX-xxT) GENERAL Power Control Monitoring EDH Processing Embedding level +5V/2.6W / +15V/1W DIP switches Front panel LEDs and GYDA-SC and GPI Full. Received flags are updated, new CRCs are calculated SMPTE 272M-C Synchronous audio at 48kHz and extended data packets (24-bit optional) VIDEO INPUT Video data rate 270Mbps Video frame rate 50Hz or 60Hz Equalization Automatic up to 35dB Impedance 75 ohm Return loss >15dB @ 270 MHz Signal level Nom. 800 mV Connector BNC AUDIO INPUTS No. of ana. inputs 4 Audio data rate 48kHz Impedance 24 kohm electronically balanced Connector 25-pin D-sub Embedded audio word length: Configurable 20 or 24 bits. Dynamic range* >100dB(A) Crosstalk < -90dB Frequency response 20-Hz-20kHz +0dB –0.1dB Common Mode Rejection Ratio (CMRR): Min 70dB, typ 80dB Group delay 12 samles, 250 us Stopband attenuation 95dB SDI OUTPUT No. of SDI outputs 1 Connector BNC Impedance 75ohm Return loss >15dB @ 270 MHz Signal level Nom. 800 mV Rise/fall time 650ps typ. OPTICAL OUTPUT (optional) Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI = unit interval) 0.135 UI max. Return loss >40dB Max. reflected power 4% Connector SC/UPC * Dynamic range is calculated as |(THD+N of –60dBFS signal)|+60 120 | network-electronics.com • 4 channel analog audio de-embedder • 24 bit converters 106dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments on DIP switches • EDH insertion and handling • Optional with optical input (AAV-DMUX-R) GENERAL Power Control Monitoring EDH Processing De-Embedding level +5V/2.4W / ±15V/2.2W DIP switches Front panel LEDs and GYDA-SC and GPI Full. Received flags are updated, new CRCs are calculated SMPTE 272M-C Synchronous audio at 48kHz and extended data packets (24-bit optional) Analog AUDIO OUTPUTS Number of outputs 4 electronically balanced Connector D-sub 25 pin female Common mode voltage tolerance ±15 V Output impedance (differential) 50ohm Frequency response 10 Hz–21.5kHz, +0dB -0.1dB Passband ripple ±0.0002dB Group delay 44 samples/0.9ms Stopband attenuation 75dB Dynamic range* Min. 100dB(A) (0dBFS @ +12dBu). Typ. 105dB(A) THD+N @ -1dBFS Max. –80dB, Typ. –87dB Intermodulation dist. @–12dB FS** Max. –80dB, Typ. –87dB Crosstalk Max. –85dB, Typ. –95dB SDI OUTPUT No. of SDI outputs 1 Connector BNC Impedance 75ohm Return loss > 15dB @270MHz Signal level nom. 800mV. Rise/fall time typically 650ps. OPTICAL INPUT (optional) Transmission circuit fiber Multi mode 50/125um Single mode 9/125um compatible Optical wavelength 1200-1620nm Max. Optical power 0dBm Sensitivity -20dBm, typ. -25dBm Return loss Better than 40dB typ. Max. reflected power 4% Connector SC/UPC VIDEO INPUT Video Data rate 270Mbps Video frame rate 50Hz or 60Hz Equalization Automatic up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC * |(THD+N of –60dB FS signal)| + 60 ** SMPTE 4:1 60 Hz + 7kHz SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Embedders/De-embedders 2.1 The Global Video Transport Leader network-electronics.com | 121 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Embedders/De-embedders AAV-HD-XMUX(-T/R)/ AAV-SD-XMUX(-T/R) HD/SD Analog/Digital Audio Embedder SD / HD Optical Transmitter Optical Receiver optical fiber Re-clocker SDI/HD Input RS422 EDH/ DeSer. Deembed. Embedder EDH/ Ser. EQ SDI/HD Output EQ Audio Processing Rx ANA1 A/D ANA2 A/D AES1 SRC AES2 SRC SD / HD optical fiber Tx • Audio Matrix • Audio Delay • Group swapping • Video Generator • Audio Generator RS422 AES1 AES2 Microcontroller Remote Control • AAV-HD-XMUX can handle SD and HD digital uncompressed video • AAV-SD-XMUX can handle SD digital uncompressed video • De-embed and embed all groups of audio • Copy or move audio groups without additional delay • De-embed 2 AES3 digital audio and non-audio signals • Embed 2 AES3 digital audio and non-audio signals • Embed 4 analogue audio signals • Apply sample rate converters when needed on the AES3 inputs • Apply extra audio delay • Swap stereo channels • Make mono or sum from stereo signals • Have optical laser output • Have optical input • Transport asynchronous serial data • Generate video and audio signals • De-glitch correctly synchronised switched video Measurement conditions Audio Sampling rate Ambient temperature 48 kHz 25ºC General Power +5V DC 0.7A 3.5W +-15V DC 0.017A 0.5W Control DIP switches, GYDA system controller. Monitoring Front panel LEDs, GYDA system controller and GPI. EDH/CRC processing Full. Received flags are updated, new CRCs are calculated. Boot time 1.2 second Digital audio inputs and outputs Conform to AES3-2003 Video inputs and outputs Conform to SMPTE 292M-1998 Data input and output Conform to EIA RS-485 122 | network-electronics.com Processing Video latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values. SD latencies Video des+4+350+256+2+ser video samples = 45.3us Audio embedding AES+2+1+16 audio samples=20/48000 = 417us Audio de-embedding 4+16+1 audio samples =21/48000 = 438us Embedding data GPI mode 8+4+32 96kHz samples =44/96000 = 458us Embedding data UART mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms De-embedd. data GPI mode 8+32+8 96kHz samples =44/96000 = 458us De-embedding UART mode 8+32+8 96kHz samples =48/96000 = 458us HD latencies Video des+8+1024+1024+3+ser video samples = 27.6us Audio embedding AES+2+1+8=12 /48000 = 250us Audio de-embedding 2+8+1=11/48000 = 229us Embedding data GPI mode 8+4+16 96kHz samples =28/96000 = 292us Embedding data UART mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms De-embedd. data GPI mode 4+16+8 96kHz samples =28/96000 = 292us De-embedding UART mode 4+16+8 96kHz samples =28/96000 = 292us SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Embedders/De-embedders 2.1 AAV-HD-XMUX(-T/R)/ AAV-SD-XMUX(-T/R) Electrical video input AAV-HD-XMUX Video Data rate Video frame rate 270Mbps or 1,485Gbps 24p, 50i, 60i, 50p or 60p and pull down rates AAV-SD-XMUX Video Data rate 270Mbps Video frame rate 50i and pull down 60i rates Equalisation Automatic up to 35dB Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level nom. 800mV Connector BNC Optical video input Optical wavelength 1200-1620nm ±40 nm Maximum Optical power 0 dBm HD PIN. Min. Optical power HD/ SD -24/-28 dBm with HD PIN. Return loss Better than 27 dB. Maximum reflected power 0,04 Transmission circuit fibre Single mode HD PIN/ (Multi-mode option on request). Multi-mode PIN is standard with AAV-SD-XMUX Connector SC/UPC Analogue audio inputs Number of inputs 4 Sampling frequency 48 kHz Differential input impedance 24 kohm Common mode input impedance 50 kohm Connector (C1 backplanes) DB-25F (Female with UNC threads) Max. signal level (0 dBFS) +12, +13.5, +15, +16.7, +18, +20, +21 or +24dBu. Level precision +- 0.1dB where Zsource < 40 ohm. Common mode voltage tolerance +- 30V – (Maximum peak signal level) Frequency response 20 Hz – 20 kHz 0.1 dB Pass-band ripple +- 0.005 dB Stop band attenuation 80 dB Dynamic range Min. 103 dB (A), typical 107 dB(A) THD+N @ -1 dBFS Max. -90 dB, typical -96 dB. Intermodulation distortion Max. -90 dB, typical -95 dB. Crosstalk Max. -90 dB, typical -99 dB. CMRR (20 Hz – 15 kHz) Max. 70 dB @ 15 kHz, typical -90 dB @ lf. Digital Audio Inputs Number of AES3 inputs Audio data rate 2 30 kHz to 200 kHz, converted to 48 kHz if not isochronous to the video input signal. Input impedance 110 ohms transformer balanced. Connector (C1 backplanes) DB-25F (Female with UNC threads) Embedded audio word length 20 or 24 bits Embedded audio Channel Status As received when isochronous, otherwise fixed. Sample rate converter dynamic range 139 dB(A) @ 1kHz Data inputs RS422 Connector UART mode Baud rates Data length Parity Stop bits GPI mode Raw data sampling freq. 1 8P8C Modular jack 9600 to 115200 7 or 8 bits None, odd or even 1, 1.5 or 2 bits 93750 Hz Electrical video output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. Rise/fall time typically 650ps. @270Mbps. < 270ps @1.485Gbps Optical video output Optical wavelength (13T) 1310nm ±40nm Light source FP semiconductor laser Optical power -7.5 dBm Extinction ratio >5:1 Optical wavelengths (13T0, 15T, CxxxxT) 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1470, 1490, 1510, 1530, 1550, 1570, 1590, 1610nm ±6nm Light source DFB semiconductor laser Optical power 0 dBm Extinction ratio >10:1 Jitter (UI=unit interval) <0.135 UI @ SD, <0.2 UI @ HD Return loss better than 40 dB typ. Maximum reflected power 0,04 Transmission circuit fibre 9/125um Single Mode Connector SC/UPC Digital Audio outputs Number of AES3 outputs Audio data rate Impedance (C1 backplanes) Connector (C1 backplanes) 2 48 kHz 110 ohm transformer balanced. DB-25F (Female with UNC threads) Data outputs Number of RS485 outputs Connector 1 8P8C Modular jack GPI outputs Signals Connector Signal type Maximum voltage Maximum current Power status good, no video input lock, laser failure. 8P8C Modular jack Open drain transistor with free-wheel diode. 100 V 150 mA network-electronics.com | 123 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Embedders/De-embedders AAV-HD-DMUX(-R)/ AAV-SD-DMUX(-R) HD/SD Analog / Digital Audio De-embedder SD / HD Optical Transmitter Optical Receiver optical fiber Re-clocker SDI/HD Input RS422 EDH/ DeSer. Deembed. Embedder EDH/ Ser. EQ SDI/HD Output EQ Audio Processing Rx SD / HD optical fiber • Audio Matrix • Audio Delay • Group swapping • Video Generator • Audio Generator Tx RS422 A/D ANA1 A/D ANA2 AES1 AES2 AES3 Remote Control Microcontroller • AAV-HD-DMUX can handle SD and HD digital uncompressed video • AAV-SD-DMUX can handle SD digital uncompressed video • De-embed and embed all groups of audio • Copy or move audio groups without additional delay • De-embed 2 AES3 digital audio and non-audio signals • De-embed 4 analogue audio signals • Apply extra audio delay • Swap stereo channels • Make mono or sum from stereo signals • Have optical input • Transport asynchronous serial data • Generate video and audio signals • De-glitch correctly synchronised switched video 124 | network-electronics.com AES4 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Embedders/De-embedders 2.1 AAV-HD-DMUX(-R)/ AAV-SD-DMUX(-R) Measurement conditions Audio Sampling rate 48 kHz Analogue audio output level setting +18 dBu = 0dBFS Ambient temperature 25ºC General Power +5V DC 0.69A 3.5W +-15V DC 0.02A 0.6W Control DIP switches, GYDA system controller. Monitoring Front panel LEDs, GYDA system controller and GPI. EDH/CRC processing Full. Received flags are updated, new CRCs are calculated. Boot time 1.2 second Digital audio outputs Conform to AES3-2003 Video inputs and outputs Conform to SMPTE 292M-1998 Data input and output Conform to EIA RS-485 Processing Video latency is variable due to the de-glitcher but the values below apply when the video signal is first applied. Other latency values are maximum values. SD latencies Video des+4+350+256+2+ser video samples = 45.3us Audio embedding AES+2+1+16 audio samples=20/48000 = 417us Audio de-embedding 4+16+1 audio samples =21/48000 = 438us Embedding GPI mode 8+4+32 96kHz samples =44/96000 = 458us Embedding UART mode 32+128+17+16 96kHz samples =193/96000 = 2.01ms De-embedding GPI mode 8+32+8 96kHz samples =44/96000 = 458us De-embedding UART mode 8+32+8 96kHz samples =48/96000 = 458us HD latencies Video des+8+1024+1024+3+ser video samples = 27.6us Audio embedding AES+2+1+8=12 /48000 = 250us Audio de-embedding 2+8+1=11/48000 = 229us Embedding GPI mode 8+4+16 96kHz samples =28/96000 = 292us Embedding UART mode 16+128+17+16 96kHz samples =177/96000 = 1.84ms De-embedding GPI mode 4+16+8 96kHz samples =28/96000 = 292us De-embedding UART mode 4+16+8 96kHz samples =28/96000 = 292us Electrical video input AAV-HD-DMUX Video Data rate Video frame rate 270Mbps or 1,485Gbps 24p, 25i, 30i, 50p or 60p and pull down rates. PsF formats are handled as interlaced. AAV-SD-DMUX Video Data rate 270Mbps Video frame rate 25i and pull down 30i rates Equalisation Automatic up to 35dB Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level Nom. 800mV Connector BNC Optical video input Optical wavelength 1200-1620nm ±40 nm Maximum Optical power 0 dBm HD PIN. Minimum Optical power HD/ SD -24/-28 dBm with HD PIN. Return loss Better than 27 dB. Maximum reflected power 0,04 Transmission circuit fibre Single mode HD PIN/ (Multi-mode option on request). Multi-mode PIN is standard with AAV-SD-DMUX Connector SC/UPC Data inputs RS422 Connector 1 Modular jack 8P8C Packet or UART mode Baud rates Data length Parity Stop bits 9600 to 115200 7 or 8 bits None, odd or even 1, 1.5 or 2 bits GPI mode Raw data sampling frequency 93750 Hz Electrical video output Number of HD/SDI outputs 1 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. Rise/fall time typically 650ps. @270Mbps. < 270ps @1.485Gbps Analogue audio outputs Number of outputs Sampling frequency Differential output impedance Common mode output impedance Connector (C1 backplane) Maximum signal level (0 dBFS) Common mode voltage tolerance Frequency response Pass-band ripple Stop band attenuation Dynamic range THD+N @ -1 dBFS Intermodulation distortion Crosstalk CMRR (1kHz BBC method) 4 48 kHz 53 ohms 20 kohm DB-25 female. +24dBu or lower in 0.5 dB steps. +-0.1 dB tolerance + 50V, -0V 20 Hz – 20 kHz +-0.2 dB +- 0.002 dB 82 dB Min. 98 dB (A) @ +12dBu = 0dBFS Max. 110 dB(A) @ +24dBu = 0dBFS Max. -90 dB, typical -96 dB. Max. -90 dB Max. -90 dB, typical -95 dB. Max. 46 dB, typical 65 dB. Digital Audio outputs Number of AES3 outputs Audio data rate Impedance (C1 backplanes) Connector (C1 backplanes) 4 48 kHz 110 ohm transformer balanced. DB-25 female. Data outputs Number of RS485 outputs Connector 1 Modular jack 8P8C GPI outputs Signals Connector Signal type Maximum voltage Maximum current Power status good, no video input lock, laser failure. Modular jack 8P8C Open drain transistor with free-wheel diode. 100 V 150 mA network-electronics.com | 125 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Embedders/De-embedders AVA-MUX, AVA-MUX-xxT Analog Audio and Video Transport Module CVBS or Y Line 1 Marking CVBS or C EDH processor Audio 2R Embedder Serialiser Audio 2L SDI Optical Output Audio 1R Audio 1L Occupies two slots • 4 channel analog audio and video embedder • Termination switches and loop connectors for input video • Cascadable for additional audio channels • EDH insertion • 20 or 24 bit audio processing • Optional with optical output (AVA-MUX-xxT) Measurement conditions Audio Sampling rate 48 kHz Ambient temperature 25ºC Measurement bandwidth 20 Hz-20 kHz Detector RMS Input overload level (0 dBFS) +18 dBu SDI Output Video Data rate 270Mbps Number of SDI outputs 1 Connector BNC Impedance 75ohm Return loss > 15dB @270MHz Signal level nominal. 800mV Rise/fall time typically 650ps General Power +5V DC 0.94A 4.7W +15V DC 0.063A 0.95W -15V DC 0.027A 0.4W Control DIP switches, Gyda system controller Monitoring Front panel LEDs and Gyda system controller EDH processing Full. Received flags are updated, new CRCs are calculated Embedding level SMPTE S272M C Synchronous audio at 48 kHz and extended data packets (24 bit optional). Embedded audio word length Configurable 20 or 24 bits. Video processing word length 10 bits Audio delay 0.79 ms Video delay 132.3 μs Audio Inputs Number of analog inputs 4 Differential Impedance 25 kohm, electronically balanced Connector DB25 pin, female Maximum signal level Configurable +12dBu to +24dBu (= 0dBFS) Common mode voltage tolerance ±30 V Frequency response 20Hz – 20kHz ±0.dB Passband ripple ±0.035dB Stop band attenuation 95dB Dynamic range1) Min. 101dB(A) (0dBFS = +12dBu), Typ. 107dB(A) THD+N @ -1dB FS Max. -85dB, Typ. < -95dB Intermodulation distortion2) @–12dB FS Max. -90dB Crosstalk Max. -80dB, 20Hz – 20kHz, Typ. -95dB CMRR (0 Hz – 8kHz) Min. 70dB, Typ. 80dB 126 | network-electronics.com Optical Output (optional) Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ±40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ±40nm Optical power 0dBm Optical wavelength for CWDM See page 153 Optical power 0dBm Jitter (UI=unit interval) Max. 0.135 UI Return loss Typ. > 40dB Maximum reflected power 4% Connector SC/UPC GPI GPI Output Power good, SDI unlock, Embed error, Audio overload1, Audio overload2 GPI Connector RJ45 Signal type Open collector transistor Maximum voltage 50V Maximum current 400mA if only one output driven, 100mA all outputs driven 1) (THD+N of –60dB FS signal)| + 60 2) SMPTE 4:1 60 Hz + 7kHz SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Embedders/De-embedders 2.1 AVA-DMUX, AVA-DMUX-R Analog Audio and Video Transport Module Optical Input Audio 2R Audio 2L Reclocker deserialiser SDI Audio 1R Audio 1L De-embedder Y, G or CVBS U, B or Y Frame Synchroniser Y, R or C BB CVBS, Y or BB • 4 channel analog audio og video de-embedder • Component and composite video outputs • Cascadable for additional audio channels • EDH handling • Optional with optical input (AVA-DMUX-R) Occupies two slots Measurement conditions Audio Sampling rate 48kHz Ambient temperature 25 OC Measurement bandwidth 20 Hz-20kHz Detector RMS Input overload level (0dBFS) +18dBu De-embedding level Audio Delay Video Delay +5V/5.3W, +15V/1.5W, -15V/1.3W DIP switches/GYDA-SC Front panel LEDs and GYDA-SC Full. Received flags are updated, new CRCs are calculated SMPTE S272M C – Synchronous audio at 48kHz and extended data packets 0.67 ms (12+20 audio samples) 5.1us in minimum delay mode, 40ms or greater if frame buffer is used SDI Video Input Video Data rate 270Mbps Video frame rate 50 Hz or 60 Hz Equalization Automatic up to 35dB Impedance 75ohm Return loss >15dB @270MHz Signal level nominally 800mV Connector BNC Optical Input (optional) Transmission circuit fiber Input signal Return loss Termination SMPTE 170M / PAL ITU 624-4 > 35dB up to 5.75MHz 75ohm Video Outputs Number of video outputs Formats General Power Control Monitoring EDH processing Black Burst reference input Multi mode 50/125um, Single mode 9/125um comp. Optical wavelength 1200-1620nm Maximum Optical power 0dBm Sensitivity -20dBm, typ. -25dBm Return loss Better than 40dB typ Maximum reflected power 4% Connector SC/UPC 4 YUV+CVBS, RGB+CVBS, YC+Y+CVBS, YC+BB+CVBS Connector BNC Impedance 75ohm Return loss > 35dB up to 5.75 MHz Signal level 1V Audio Outputs Number of analog outputs Audio sampling frequency Impedance 4 electronically balanced 48kHz 50ohm differential, 5 kohm common mode Connector 25 pin D-sub De-embedded audio word length Up to 24 bits Frequency response1) 20Hz – 20kHz Dynamic range2) > 106dB(A) THD+N @ 0dBFS Better than 0.01%, –80dB Intermodulation distortion3) Better than 0.01%, –80dB Crosstalk < -90dB Noise < –75dBqp CCIR-468 weighted, < –90dBu A-weighted GPI GPI Output Power good, SDI unlock, de-embed error, audioA invalid, audioB invalid GPI Connector RJ45 Signal type Open collector transistor Maximum voltage 50 V Maximum current 400 mA if only one output driven, 100 mA all outputs driven 1) ±0.1dB relative to the level at 500 Hz 2) |THD+N @ -60dBFS A-weighted| + 60 3) SMPTE IM, 60 Hz + 7kHz 4:1 @ -12dBFS (RMS) network-electronics.com | 127 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 The Global Video Transport Leader 128 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION HD to SD Downconverter with Framesync and ARC 2.1 DWC-HD-DMUX HD Down-Converter with Optical Input and Audio Decoding HD/SD input Optical HD/SD input electrical HD/SD OuT reclocker/ De-serialiser 2x2 x-point HD/SD OuT analog Video Outputs SD cVbS/cVbS/Y/g HD/SD De-ebedder HD SD Down Scaler SD Frame buffer SD re-embedder Video Dac cVbS/Y/cb/b cVbS/c/cr/r Digital audio audio Proc audio buffer audio Matrix Stereo audio Dac Stereo audio analog OuT Digital audio OuT General Power Control Monitoring • Broadcast quality • Optical input with direct reclocked electrical output • High quality down-conversion • Analog audio monitoring • SDI and analog high quality video output • Audio delay • Internal video and audio generator • SD framestore for down-converted output • Sync input • PhaseTru™ technology improves 1080i to 576i/480i conversion Audio outputs 5V, +/-15V DC, <7W DIP switches, GYDA system controller. Front panel LEDs, GYDA system controller. Electrical video input Video Data rate 270Mbps or 1,485Gbps; Conform to SMPTE 292M-1998, SMPTE 259M-C Video frame rate 1080i/29.97; 1080p/23.976; 1080i/25; 1080p/25; 720p/59.94; 720p/50 Equalization Automatic up to 35dB (eq. 300m @270Mbps with Belden 8281 / 100m @1485Mbps with Belden 1694A) Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level nom. 800mV Connector BNC Number of AES3 outputs 1 AES3 audio data rate 48 kHz Connector AES3 RJ45 Number of balanced analog stereo audio outputs 1 Connector analog audio WECO screw terminal Versions / options DWC-HD DWC-HD-DMUX DWC-HD-R DWC-HD-DMUX-R Optical video input Optical wavelength Maximum Optical power 1200-1620nm –3 dBm HD PIN. Minimum Optical power HD/ SD –22/–28 dBm with HD PIN. Return loss better than 27 dB. Maximum reflected power 4% Transmission circuit fiber Single mode HD PIN/ (Multi-mode option on request) Connector SC/UPC DWC-HD-M DWC-HD-M-DMUX DWC-HD-M-R DWC-HD-M-DMUX-R Electrical video output Number of HD/SDI outputs 2 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. Number of Analog Video outputs 3 Analog Video output formats 3 x CVBS. component G/B/R, component Y/ Pb/Pr or S-video. PAL and NTSC. Connector BNC Impedance 75 ohm Return loss > 35 dB to30 MHz HD down converter, SD/CVBS output HD down converter, SD/CVBS output, AES/ EBU and Stereo Analog Audio output HD down converter with high sensitivity 9/125um single mode optical input, SD/ CVBS output HD down converter with high sensitivity 9/125um single mode optical input, SD/ CVBS output, AES/EBU and Stereo Analog Audio output HD down converter for monitoring applications, SD/CVBS output, without Genlock HD down converter for monitoring applications, SD/CVBS output, without Genlock, AES/EBU and Stereo Analog Audio output HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/CVBS output, without Genlock HD down converter with high sensitivity 9/125um single mode optical input, for monitoring applications, SD/CVBS output, without Genlock, AES/EBU and Stereo Analog Audio output network-electronics.com | 129 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Video Conversion ADC-SDI ADC-SDI-CC NTSC/PAL to SDI Decoder Video A/D Converter and Decoder Loop CVBS/Lum2 Genlock Loop SDI 1 CVBS/Y ADC CVBS/C PAL/NTSC Field 1 Insertion Genlock Red/Pr SDI 1 ADC Green/Y EDH Decoder PAL/NTSC Field 1 Insertion Decoder SDI 2 Blue/Pb/Crom2 EDH Video Buffer SDI 3 Microcontroller Input Output 4:2:2 SMPTE 259M-C, 270Mbps > 15dB @ 270MHz nom. 800mV Processing Performance Quantisation Sampling Video bandwidth SNR (unweight) Diff. gain Diff. phase Power Microcontroller Remote Control • 10-bit component, composite or Y/C to SDI converter • Built-in video PROC-AMP • 3 SDI outputs • 5 line adaptive comb filter and selectable filter settings • Automatic standards detection • EDH processing Digital Serial Output Formats Composite Video PAL (625/50) NTSC (525/60) Y/C (S-Video), with active loopthrough Return loss >35dB up to 5.75MHz Signal Level nom 1000mV, ± 10mV Signal (3x) Return loss Signal level SDI 3 Remote Control • 10-bit composite to SDI decoder • Automatic standards detection • EDH processing • 2x oversampling (27MHz) • Analog inputs w/ loop-through, 3 SDI outputs • 3-line adaptive comb filters and selectable filter settings SDI 2 10 bits 27MHz (2x oversampling) 6MHz > 60dB < 0.6% < 1.00° + 5VDC / 2.2W, - 15VDC / 0.7W SELECTABLE LUMA/CHROMA SEPARATION FILTERS • Adaptive 3-line comb filter • Fixed 2-line comb filter • Low-pass/bandpass Signal type SMPTE 259M / ITU-R BT.601 Connector BNC Impedance 75ohm Return loss >15dB @ 270MHz Jitter < 0.2UI Peak to peak signal level 800mV ± 80mV Composite and Y/C Input Signal type Composite video, PAL 625/50Hz or NTSC 525/60Hz Y / C (S-video) Connector BNC Impedance 75ohm Signal level 1Vp-p Return loss >40dB Component and RGB Input Signal rate 625/50Hz or 525/60Hz Signal type RGB without setup, with separate sync. SMPTE / EBU Y, Cr, Cb Connector BNC Impedance 75ohm Signal level Y = 1Vp-p. Cb, Cr, R, G, B = 0.7Vp-p Return loss >40dB Processing Performance Signal path Sampling Luma/Chrome separation Video bandwidth Hue Accuracy Color Sat. Accuracy Luminance Nonlinearity SNR (unified weighted) Diff. gain Diff. phase Video processing delay Power 130 | network-electronics.com 10 bits 27MHz, 2 x oversampling Selectable 5 line adaptive comb filter or chroma trap filter 6MHz 0.5° typical 0.8% typical 0.6% typical 66dB typical <1.0% <1.0° 3 video lines +5V DC / 2.75W, -15V DC / 0.5W SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Video Conversion 2.1 DAC-SDI SDI to NTSC/PAL Encoder and D/A Converter Loop SDI H-Phase Adj. EQ Re-clocker Frame Buffer G/Y/CVBS Filter 10-Bit Encoder/ DAC EDH Genlock B/U/Cuma R/V/Luma CVBS/Y/ Black Burst Microcontroller Remote Control • 10-bit SDI to composite encoder and 10-bit SDI to component converter in one product • Built-in frame synchronizer w/ sub-carrier and horizontal phase adjustment • Large frame buffer (4 frames) • EDH monitoring • 4x oversampling (54 MHz) • SDI input w/ loop-through, 4 analog outputs Digital Serial Input Analog Output Signal 4:2:2 SMPTE 259M-C, 270Mbps, with active loop through Equalization Automatic Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC Black&Burst input Input Signal Composite PAL 625/50 or NTSC 525/60 Return loss > 35 dB up to 10MHz Digital Serial Output Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Frame Delay output Output level Open collector pulled high to 5V. Connector BNC Impedance 75 ohm Formats Composite video, PAL 625/50 or NTSC 525/60, RGB, YUV / YCrCb Y / C (S-video), Composite and Component video is provided simultaneously Signal level 1Vp-p Return loss >35dB up to 10MHz Minimum signal delay 3µs Signal delay when locked to Black&Burst 1-2 Frames Processing Performance Signal path Sampling Video bandwidth Hue Accuracy Color Saturation Accuracy Luminance Nonlinearity Chroma AM Noise Chroma PM Noise SNR Diff. gain Diff. phase Power 10 bits 54MHz, 4 x oversampling 6MHz 0.5° typical 0.8% typical 0.6% typical -62dB typical -72dB typical -70dB typical <1.0% <1.0° +5V DC / 3.1W, -15V DC / 0.7W network-electronics.com | 131 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Audio Conversion DAC-AES ADC-AES Dual Audio D/A Converter Dual Audio A/D Converter Bal. Input ANA1A AES1 ANA2A AES Receiver Re-clocker D/A Lowpass filter + gain ANA1B ANA2B Gain Setting A/D AES Format + Driver ANA1 AES1A ANA2 AES1B ANA3 AES2A ANA4 AES2 ANA3A II AES2B ANA4A ANA3B AES Sync. Ref. Clock Control PLD Microcontroller Microcontroller AES Receiver ANA4B Remote Control Remote Control • 24-bit high performance AES to analog audio converter • Two independent converters on one board • Typical dynamic range of 120dBA • Transformer balanced AES inputs • Allows sampling rates from 32–96kHz • 24-bit high performance analog audio to AES converter • Two independent converters on one board • Typical dynamic range of 117dBA • Transformer balanced AES outputs • Internal sampling rates 44.1, 48 and 96kHz Also available with 75ohm AES-3id backplane Analog outputs Number of outputs Frequency response Passband ripple Group delay Stopband attenuation Dynamic range THD+N @ -1dB FS Crosstalk Output differential impedance Analog inputs 2x 4 electronically balanced 20Hz > –0.1dB > 20kHz ±0.0002dB 43.5 samples 110dB Min. 112dBA, Typ. 120dBA Max. –90dB, Typ. –100dB Max. –100dB, Typ. –110dB 50 ohm AES Audio Input Number of inputs 2 transformer. balanced Format AES3-1992 Impedance 110ohm Connector DB15-110ohm Sampling rates 29kHz–100kHz GEneral Power +5V/1.4W / ±15V/3.5W Control Control system for access to set-up and module status with BITE (Built-In Test Equipment) Number of inputs Frequency response Passband ripple Common mode voltage tolerance Group delay Stopband attenuation Dynamic range THD+N @ -1dB FS Crosstalk CMRR Input differential impedance 4 electronically balanced 10Hz > –0.1dB > 21.5kHz ±0.001dB +/- 30V 65 samples 110dB Min. 112dBA, Typ. 117dBA Max. -95dB, typ. -102dB Min. –100dB, Typ. –110dB Min. 70dB, Typ. 80dB 25kohm AES Audio Outputs AND SYNC. REF INPUT Number of outputs 2x2 transformer. balanced Format AES3-1992 Impedance 110ohm Connector DB15-110ohm Internal sampling rates 44.1kHz, 48kHz, 88.2kHz External synchronisation AES3 on DB15 connector Sync. input impedance 110ohm External sampling rates 29kHz–100kHz GEneral Power +5V/2.4W / ±15V/2.1W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) 132 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Synchronisation DLY-AES LIS-SDI Dual AES Audio Delay SDI Line Synchronizer Tracking Input Tracking Control AES 1 SRC AES 2 SRC Delay Control Input GPI x 2 2.1 Dip Sw. Setting Delay M U X Delay Delay Control d d AES 1 (1) Ref AES 1 (2) Loop AES 2 (1) SDI in Sync. Sep. Line synchroniser EDH insertor SDI 2 SDI 3 SDI loop Reference Input Black Burst SDI 1 Reclocker & EDHanalyser AES 2 (2) Clock Control PLD AES-11 Tracking Delay Output Genlock Microcontroller Remote Control Microcontroller • 2 independent audio delay signal paths • Built-in sample rate converter accepting 32, 41.1, 44.1kHz • Black-burst and AES-11 reference input • Up to 10s delay at 48kHz • Simultanous fixed delay and externally switchable dynamic delay • Delay tracking input for synchronisation with DAC-SDI, FRSSDI or other video devices • 2 AES outputs per delay line • Transformer balanced AES in- and outputs Remote Control • SDI 10 bit 4:2:2 line synchronizer • Analog Black Burst genlock • EDH insertion and handling in accordance with SMPTERP165 • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 line synchronized outputs • Automatic detection of 525- and 625-line format input DIGITAL SERIAL INPUT Input format General Power Control Monitoring +5V DC approx. 0.3A 1.5W DIP switches, GYDA-SC Front panel LEDs and GYDA-SC Inputs (AES3-1995) Number 2 Connector DB25 female Sample rate converter word-length 24 bits Sample rates Any between 1/3 and 3 times the reference sample rate Reference Input Format AES11 (AES-3-ID) or analog video Connector BNC Reference Sample rate from video 48kHz Sample rates from 48, 44.1, 32kHz Outputs (AES3-1995) Number 4 Connector DB25 female Usage Either dual outputs from delay lines 1 & 2 or quad outputs from delay line 1 Delay Minimum delay Maximum tracking delay Maximum fixed delay @ 48kHz Maximum fixed delay @ 44.1kHz Maximum fixed delay @ 32kHz 92 samples at 48kHz 230ms 10.6s 11.6s 16.1s 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Equalization Automatic up to 30dB Signal level 800mV nominal Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC DIGITAL SERIAL OUTPUT Output format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Number of outputs 3 synchronized outputs, 1 buffered loop of input Signal level 800mV nominal Rise/fall time typ. 650ps Jitter 0.2UI max. Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC REFERENCE INPUT Input format Black Burst, Composite analog (NTSC SMPTE 170M / PAL ITU 624-4) Signal level 1Vp-p Impedance 75 ohm, loop must be terminated with 75 ohm Connector BNC DELAY ADJUSMENTS Minimum delay Maximum delay Resolution 39 samples 1 line + 39 samples down to video sample resolution Power Input voltage 5VDC/3.0W, -15VDC/0.3W network-electronics.com | 133 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Synchronisation FRS-SDI SDI Frame Synchronizer Tracking Delay Output Genlock Ref Loop Reclocker & EDHanalyser SDI in Frame synchroniser and Delay adj. SDI 1 EDH insertor SDI 2 SDI 3 Black Video Generator SDI loop Microcontroller Remote Control • SDI 10 bit 4:2:2 frame synchronizer with embedded audio handling • Analog Black Burst genlock • Selectable freeze on last good frame or black video on error or on loss of input signal • EDH insertion and handling in accordance with SMPTE-RP165 • Wide delay range, from 128us up to 232ms ­(Sample, H and V adjustment) • Audio delay tracking output • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 synchronized outputs • Automatic detection of 525- and 625-line format input DIGITAL SERIAL INPUT Input format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Equalization Automatic up to 30dB Signal level 800mV nominal Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC DIGITAL SERIAL OUTPUT Output format 270Mbps scrambled NRZI 4:2:2 video (SMPTE 259M) Number of outputs 3 synchronized outputs, 1 buffered loop of input Signal level 800mV nominal Rise/fall time typ. 650ps Jitter 0.2UI max. Return loss >15dB @ 270MHz Impedance 75 ohm Connector BNC REFERENCE INPUT Input format Black Burst, Composite analog (NTSC SMPTE 170M / PAL ITU 624-4) Signal level 1Vp-p Impedance 75 ohm, loop must be terminated with 75 ohm Connector BNC DELAY ADJUSTMENTS Minimum delay Maximum delay Resolution 120us or 2 video lines 232ms down to video sample resolution POWER Input voltage 5VDC/3.0W, -15VDC/0.3W 134 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Synchronisation 2.1 FRS-HD-DMUX HD frame synchroniser with optical input • Optical input (option) • HD/SD video support • De-glitching of input signal. • Audio de-embedding – processing – re-embedding • Audio fade out/fade in • Audio router • Audio delay • Frame Sync, adjustable up to 8 frames • Change-over and input priority between optical and electrical input, selectable • Sync input, either PAL, NTSC or HD Tri-level • Video luma, chroma, gain and level adjustment • 4 video outputs, either reclocked input or frame synchronised • AES3 (48kHz), or RS-422 data available on 1 port, synchronous to video signal • Frame delay output on GPI connector General Power Control Monitoring EDH/CRC processing Audio/ data outputs 5V, +/-15V DC, <5W DIP switches, GYDA system controller. Front panel LEDs, GYDA system controller and GPI Full. Received flags are updated, new CRCs are calculated Number of AES3 / RS-422 data outputs 1 AES3 audio data rate 48 kHz Connector AES3 / RS-422 RJ45 Number of analog stereo audio outputs 1 Connector analog audio WECO screw terminal Electrical video input Video Data rate 270Mbps or 1,485Gbps; Conform to SMPTE 292M-1998, SMPTE 259M-C Video frame rate 24p, 50i, 60i, 50p or 60p and pull down rates Equalization Automatic up to 35dB (eq. 300m @270Mbps with Belden 8281 / 100m @1485Mbps with Belden 1694A) Impedance 75 ohm Return loss >15dB up to 1,5GHz Signal level nom. 800mV Connector BNC Min. Optical power HD/ SD Return loss Max. reflected power Transmission circuit fiber Connector Signals Power status good, no video input lock, Frame delay Connector RJ45 Signal type Open drain transistor with free-wheel diode Applications Any professional broadcast application where HD/SD frame synchronisation is requested. Versions / options FRS-HD-SDI Optical video input Optical wavelength Max. Optical power GPI outputs 1200–1620nm FRS-HD-DMUX -3dBm HD PIN -22/-28dBm with HD PIN. better than 27dB 4% Single mode HD PIN/ (Multi-mode option on request) SC/UPC FRS-HD-SDI-R FRS-HD-DMUX-R SD/HD frame sync with internal audio handling and GPI I/O control, 4 SDI outputs SD/HD frame sync, analog stereo audio out, AES out (or RS-422 data out, replaces AES), 4 SDI outputs SD/HD frame sync with high sensitivity 9/125um single mode optical input, internal audio handling and GPI I/O control, 4 SDI outputs SD/HD frame sync with high sensitivity 9/125um single mode optical input, analog stereo audio out, AES out (or RS-422 data out, replaces AES), 4 SDI outputs Electrical video output No. of HD/SDI outputs 4 Connector BNC Impedance 75 ohm Return loss > 15 dB to1.5GHz Signal level nom. 800mV. network-electronics.com | 135 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Automatic Changeover Modules HDSDI-CHO-2x1 SDI-CHO-2x1 HD Changeover SDI Changeover Equaliser Equaliser Outputs: HD/SD1 HD/SD2 HD/SD Main input Bypass Switch 2x1 Bypass Reclocker Equaliser HD/SD Standby input Outputs: SD1 SD2 SD Main input HD/SD3 HD/SD4 Bypass 177M / ASI SD Standby input Bypass SD3 SD4 Bypass 177M / ASI Remote Control Microcontroller • Multi-rate changeover • Non-broadcast data rates also supported non-reclocked • Auto changeover on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked HD/SDI outputs Electrical Input Number of input 2 Data rate NRZ 1 to 1485Mbps Equalization Automatic. Cable reclocker can be bypassed to support bit rates down to 1Mbps Impedance 75 ohm Return loss >= 15dB @ 1485MHz Signal level nom. 800mV. App. 200mV min. when equaliser switched to Bypass Connector BNC Electrical Output Number of outputs 4 Connector BNC Impedance 75 ohm Return loss >= 15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 outputs non inverting, 2 outputs inverting Features Re-clocking Automatic clock rate detection. Supported clock rates: 143, 177, 270, 360, 540 and 1485Mbps GEneral Power +5V DC / 3W Max. Control Control system for access to set-up and module status with BITE (Built-In Test Equipment) Supported standards SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 310M, SMPTE 344M DVB-ASI EN50083-9 136 | network-electronics.com Reclocker Bypass Microcontroller SMPTE Switch 2x1 Equaliser Remote Control • SDI changeover • Non-broadcast data rates also supported non-reclocked • Auto changeover on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked SDI outputs Electrical Signal Inputs Number of inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization 2 SMPTE 259M 1Mbps–540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz–270MHz) 0 to 300m typical Belden 8281A Electrical Signal Outputs Number of outputs Connector Signal Level Signal Polarity Impedance Return Loss 4 75 ohm BNC female 800mVp-p ±10% 2 outputs non-inverting, 2 outputs inverting 75 ohm nominal > 15dB (5MHz–270MHz) Features Re-clocking rates Supported standards 143, 177, 270, 360, 540Mbps SMPTE 259M, 305.2M, 344M, 310M, DVB-ASI EN50083-9, AES-3id Re-clocking Configurable automatic mute or bypass when not locked Input equaliser Bypass for non-video formats Control Interfaces Control Control system for access to set-up and module status with BITE (Built-In Test Equipment) Electrical Power +5V DC / 3W SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical Converters 2.1 SDI-EO SDI Electrical to Optical Converter Inputs Optical Transmitter SDI Input 19.4540Mbps Optical Output Equaliser Distribution Amplifier Data rate NRZ 19.4Mbps – 540Mbps Equalization Auto. up to 35dB Impedance 75 ohm Return loss >15dB @270MHz Signal level nom. 800mV Connector BNC 2 x SDI Output SDI Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss > 15dB @270MHz • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/297M compliant Signal level Rise/fall time nom. 800mV typ. 650ps Standards Supported standards for electrical and optical ports: SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M DVB-ASI EN50083-9 SDI-EO-13T/15T CWDM DWDM GEneral GEneral GEneral Power Control +5V DC / 1.6W Control system for access to set-up and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M Power Control +5V DC / 1.6W Control system for access to set-up and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical wavelength See page 153 Optical power 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC according to SMPTE-297M Power Control +5V DC / 10W Max. 5W typically Control system for access to set-up and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical centre wavelength See page 153 Optical power 0dBm (optionally +5dBm) Max. wavelength drift ± 0.16nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M network-electronics.com | 137 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Converters SDI-EO-2 Dual SDI Electrical to Optical Converter SD/ASI Input 1 19.4540Mbps SD/ASI Input 2 19.4540Mbps Equaliser Optical Transmitter Optical Output 1 SD/ASI Output 1 19.4540Mbps Bypass Equaliser Optical Transmitter Optical Output 2 SD/ASI Output 2 19.4540Mbps Bypass Microcontroller Remote Control • High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Active looped SDI output • Also available with reclocking Inputs Data rate NRZ 19.4 to 540Mbps Equalization Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps Impedance 75 ohm Return loss >15dB @ 270MHz Signal level nom. 800mV Connector BNC Optical Output Transmission circuit fiber Light source Optical power Optical centre wavelength Temp. range Jitter (UI=Unit Interval) Connector return loss Maximum reflected power Connector General Power +5V DC / 3.5W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment) Standards Supported standards for electrical and optical ports: SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M DVB-ASI EN50083-9 Electrical Output Number of outputs 1 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity Non inverting SD/ASI Input 1 19.4540Mbps SD/ASI Input 2 19.4540Mbps Equaliser Optical Transmitter Optical Output 1 Reclocker Bypass Equaliser SD/ASI Output 1 19.4540Mbps Bypass 177M/ASI # 2x2 Optical Transmitter Optical Output 2 Reclocker Bypass SD/ASI Output 2 19.4540Mbps Bypass 177M/ASI Microcontroller Also available with reclocking (SDI-EO-2-RC) 138 | network-electronics.com Single mode F-P / DFB laser -7.5dBm @1310nm, 0dBm (DFB laser) 1310, 1550 or CWDM See page 153 0 to +40 °C 0.135 UI max. @ 270Mbps, >40dB w/SM fiber 4% SC/UPC Remote Control SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical Converters 2.1 SDI-OE-S / SDI-OE-L / MF-OE-NRC SDI-OE-2 SDI Optical to Electrical Converter Dual SDI Optical to Electrical Converter Optical receiver Optical Input 1 Optical Receiver SDI Input Processor Optical Input Reclocker 2 x ASI / 2 x SD / HD Output 1 19.4540Mbps Reclocker Bypass 177M/ASI Distribution Amplifier # 2 x SDI Output 19.4–540Mbps Optical receiver Optical Input 2 2x2 2 x ASI / 2 x SD / HD Output 2 19.4540Mbps Reclocker Bypass 177M/ASI Microcontroller • High sensitivity receiver • Built-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant Optical Input Data rate optical Sensitivity Maximum input power Optical wavelength Transmission Circuit fiber Remote Control • High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Re-clocker bypass for non-video formats • 2 Output Distribution Amplifier Optical Input 19.4Mbps – 540Mbps SDI-OE-S –20dBm typ. SDI-OE-L Better than –30dBm typ. MF-OE-S-NRC –20dBm typ. SDI-OE-S -6dBm SDI-OE-L 0dBm 1200-1620nm Multi mode 50/125um, Single mode 9/125um compatible Return loss Better than 40dB w/Single mode fiber (typ.) Detector overload threshold min. –6dBm, typ. –3dBm Connector SC/UPC GEneral Power SDI-OE-S and MF-OE-S-NRC + 5V DC /1.7W Power SDI-OE-L +5V DC/1.6W, -15V DC/0.15W Control Control system for access to set-up and module status with BITE (Built-In Test Equipment) SDI Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss > 15dB @270MHz Signal level nom. 800mV Rise/fall time typ. 650ps Jitter (UI= Unit Interval) 0.2 UI max. Data rate optical 19.4 to 540Mbps Sensitivity: for SDI (270Mbps) Better than –30dBm Detector overload threshold min. -6dBm Optical wavelength 1200–1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC General Power +5V DC / 3.2W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment) Electrical Output Number of outputs 2 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 270MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 non inverting Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI EN50083-9 network-electronics.com | 139 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Converters SDI-TR / SDI-TR-D15xx and SDI-TR-C1xxx / MR-TR-2.5G (STM16 / OC48) / MR-TR-13T / MR-TR-D15xx.xx / MR-TR-C1xxx Optical Converter and Transponder Optical Transmitter Optical Receiver Input Processor Optical Input SDH / 1000BaseLX CDR Optical Output 3x1 MUX Equaliser HD/SD/ASI CDR Distribution Amplifier SD/HD/ASI Input 19.4–1485Mbps Microcontroller Input / CDR Select The MR-TR-2.5G is a multi bit-rate converter and transponder module providing high performance media conversion for various signal formats from 19.4Mbps up to 2488Mbps. The unit can be configured as an Electrical to Optical or Optical to Electrical converter, or as an Optical to Optical Transponder. The unit provides a high sensitivity optical receiver and lasers 1310, 1550, CWDM and DWDM. Unmatched signal accuracy, even in critical applications with pathological signal patterns makes the MR-TR-2.5G the first choice for all optical transport demands. The MR-TR-2.5G can transport all HD and SD signal formats in addition to DVB-ASI and SMPTE 310M. It can perform optical refreshing, reclocking and wavelength swapping up to 2488Mbps. Optical Input Data rate optical Remote Control The input sensitivity is typically Better than –20dBm at 2488Mbps. The open system platform of Network Electronics DWDM multiplexing technology allows easy interoperability with third party fiber optical systems. The electrical input is equipped with a multi rate cable equaliser providing an Equalization of typically 100m of high quality coax cable at 1485Mbps. A distribution amplifier with 2 outputs reduces the need for additional DAs (for DVB-ASI only one can be used). Electrical Input See table Sensitivity for HD-SDI (1485Mbps) Better than –20dBm for SDI (270Mbps) Better than –25dBm for SDI (270Mbps) Better than –30dBm a) for SDH /SONET (622Mbps) Better than –25dBm for SDH /SONET (2488Mbps) Better than –20dBm for 1000BaseLX (1250Mbps) Better than –25dBm Detector overload threshold min. -3dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Transmission circuit fiber Multi mode 50/125um, single mode 9/125um compatible a) Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC Optical Output Transmission circuit fiber Light source (13T versions) Light source (DWDM/CWDM) Optical power Optical centre wavelength for DWDM Optical centre wavelength for CWDM Max. wavelength drift Jitter (UI=Unit Interval) 1 x ASI / 2 x SD / HD Output Bypass 177M / ASI Bypass • Multirate optical to optical transponder for 19.4 – 2488Mbps • O/E, E/O converter • 1550nm, CWDM and DWDM laser available • Supports SDI, HD-SDI, SMPTE 310 M, DVB-ASI, SDH/SONET up to STM-16/ OC-48, Gigabit Ethernet and many other signal formats • Performs 3R Regeneration Single mode 9/125um F-P/DFB Laser (-7.5dBm or 0dBm) DFB Laser 0dBm (optionally +5dBm for DWDM) See page 153 See page 153 +/- 0.16nm (DWDM) 0.135 UI max. @ 270Mbps, 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fiber Maximum reflected power 4% Connector SC/UPC Data rate NRZ 19.4 to 1485Mbps Data rate NRZ 19.4 to 540Mbps a) Equalisation Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps. Impedance 75 ohm Return loss >15dB @ 1485MHz Return loss >15dB @ 270MHz a) Signal level nom. 800mV Connector BNC Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting, 1 inverting Standards Supported standards for electrical and optical ports (MR-TR-2.5G, other versions see table): SMPTE: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI: EN50083-9 Additional supported standards for the optical ports, only optical transponder configuration: SDH / SONET: STM1 / OC3, STM4 / OC12, STM16 / OC 48 Gigabit Ethernet: IEEE 802.3, 1000BaseLX for SM fiber DWDM wavelengths ITU-T G.694.1 CWDM wavelengths: ITU-T G.694.2 a) SDI Supported signal formats GENERAL Power +5V DC / 10W Max. 5W typically (DWDM) +5V DC / 3W typically (13T and CWDM) Temperature range 0-40deg C (DWDM), 0-50degC (13T and CWDM) Control Control system for access to setup and module status with BITE (Built-In Test Equip.) 140 | network-electronics.com ELECTRICAL PORTS Digital video [Mbps] 19.4-540 1483.5 1485 OPTICAL PORTS GbE STM-1/ OC3 STM-4/ OC12 STM-16/ OC48 1250 155.52 622.08 2488.32 SDI-TR X X X X MR-TR X X X X X MR-TR-2.5G X X X X X X SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical Converters 2.1 MR-TR-3G Optical Converter and Transponder Optical Receiver Input Processor Optical Input SDH / 1000BaseLX CDR 3x1 SWITCH Optical Transmitter Optical Output HD/SD/ASI CDR Bypass Input / CDR Select 2x1 SWITCH Equaliser SD/HD/ASI Input 143–2970Mbps (Add 1) HD/SD/ASI CDR • Transmitter and receiver in the same module – Add and drop signals in a DWDM ring structure • Full frame population due to reduced power consumption – Up to 8 modules per frame • 16 3G-SDI signals (8 in each direction) on the same fiber in just 2RU each end • Up to 40 3G-SDI signals on a single fiber using DWDM • High sensitivity optical receiver Distribution Amplifier 1 x ASI / 2 x SD / HD Output Bypass Bypass Microcontroller Input / CDR Select Remote Control The MR-TR-3G for DWDM completes the second generation DWDM platform in the Flashlink range. The MR-TR-3G does everything the lower bit rate transponder modules do, and much more. The extremely low DWDM power consumption of the MR-TR-3G allows for up to 8 modules per 2RU frame. MR-TR-3G supports bi-directional signals, thereby allowing for full add/drop capabilities in a DWDM ring structure. Furthermore, the support of 3G-SDI (3GHD) single link underlines how powerful this module is. MR-TR-3G for DWDM allows for up to 40 uncompressed 3G-SDI signals on a single strand of fiber. Sensitivity figures for HD-SDI with pathological signal patterns in the range of -30dBm means up to 50% extended reach compared to first generation MR-TR modules. Optical Input Electrical Input Data rate optical 19.4 to 2970Mbps Sensitivity for 3G-SDI (2970Mbps) Better than –25dBm for HD-SDI (1485Mbps) Better than –30dBm for SDI (270Mbps) Better than –30dBm for SDH /SONET (622Mbps) Better than –30dBm for SDH /SONET (2488Mbps) Better than –25dBm for 1000BaseLX (1250Mbps) Better than –30dBm Detector overload threshold min. -5dBm Optical wavelength 1280–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss >40dB w/SM fiber Detector damage threshold >0dBm Connector SC/UPC Optical Output Transmission circuit fiber Light source Optical power Optical centre wavelength for DWDM Max number of ch. per fiber Channel spacing Max. wavelength drift Jitter (UI=Unit Interval) Connector return loss Maximum reflected power Connector Single mode 9/125um DWDM DFB Laser 0dBm (optionally +5dBm) See page 153 40 100GHz +/- 0.16nm Max 0.2UI >40dB w/SM fiber 4% SC/UPC GENERAL Power +5V DC / 3W, +15V DC/1.5W Control Control system for access to setup and module status with BITE (Built-In Test Equip.) The open system platform of Network Electronics DWDM multiplexing technology allows easy interoperability with third party fiber optical systems. Data rate NRC 19.4 to 2970 Mbps Data rate Reclocked 270, 1483.5, 1485, 2967 and 2970 Mbps Equalisation Automatic. Cable equaliser and reclocker can be bypassed to support bitrates down to 2Mbps Impedance 75 ohm Return loss >15dB, 5MHz – 1.5GHz >10dB, 1.5GHz – 3GHz Signal level nom. 800mV Connector BNC Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB, 5MHz – 1.5GHz >10dB, 1.5GHz – 3GHz Jitter (UI=Unit Interval) Max 0.2UI Peak to peak signal level 800mV ±100mV Signal polarity 1 non inverting, 1 inverting Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 292M, SMPTE 259M-C, SMPTE 297M, SMPTE424M, SMPTE 305.2M, DVB-ASI: EN50083-9 Additional supported standards for the optical ports, only optical transponder configuration: SDH / SONET: STM1 / OC3, STM4 / OC12, STM16 / OC 48, STM16/OC48 w/FEC (2670 MBps) Gigabit Ethernet: IEEE 802.3, 1000BaseLX for SM fiber network-electronics.com | 141 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Converters HD-EO-D15xx / HD-EO-C1xxx / HD-EO-13T/15T HD-SDI Electrical to Optical Converter Electrical Input Optical Transmitter Optical Output Equaliser HD-SDI Input 19.4-1485Mbps Reclocker Distribution Amplifier 2 x HD-SDI Output Data rate NRZ 19.4 to 1485Mbps Equalization Automatic. Cable equaliser and ­reclocker can be bypassed to ­support bitrates down to 2Mbps Impedance 75ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC Electrical Output Number of outputs 2 Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting, 1 inverting • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/292M compliant Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M DVB-ASI: EN50083-9 DWDM: ITU-T G.694.1 CWDM: ITU-T G.694.2 HD-EO-13T/-15T CWDM DWDM GEneral GEneral GEneral Power Power Power Control +5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P laser Optical power –7.5dBm or –3dBm @ 1310nm 0dBm @ 1550nm (DFB laser) Optical centre wavelength 1310nm or 1550nm Max. wavelength drift +/- 20nm @ temp. range 0 to +50 °C Jitter (UI=Unit Interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss >40dB w/SM fiber Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M 142 | network-electronics.com Control +5V DC / 3W Max. Control system for access to setup and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical power 0dBm Optical centre wavelength for CWDM See page 153 Max. wavelength drift ± 6nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M Control +5V DC / 10W Max. 5W typically Control system for access to setup and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source DFB Laser Optical power 0dBm (optionally +5dBm) Optical centre wavelength See page 153 Max. wavelength drift ± 0.16nm Jitter (UI=unit interval) 0.135 UI max. @ 270Mbps 0.2 UI max. @ 1485Mbps Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC acc. to SMPTE 259M SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical Converters 2.1 HD-EO-2 Dual HD-SDI Electrical to Optical Converter SD/HD/ASI Input 1 19.41485Mbps SD/HD/ASI Input 2 19.41485Mbps Equaliser Optical Transmitter Optical Output 1 Reclocker Bypass Equaliser SD/HD/ASI Output 1 19.41485Mbps Bypass 177M/ASI # 2x2 Optical Transmitter Optical Output 2 Reclocker Bypass SD/HD/ASI Output 2 19.41485Mbps Bypass 177M/ASI Microcontroller Remote Control • High-density packaging in the ultra compact 2RU frame • 1310nm, 1550nm and CWDM laser available • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking Electrical Input Data rate NRZ 19.4 to 1485Mbps Equalization Automatic. Cable equaliser and ­reclocker can be bypassed to support bitrates down to 2Mbps. Impedance 75 ohm Return loss >15dB @ 1485MHz Signal level nom. 800mV Connector BNC General Power +5V DC / 3.5W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment) Electrical Output Number of outputs 1 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity Non inverting Optical Output Transmission circuit fiber Light source Optical power Optical centre wavelength Max. wavelength drift Temp. range Jitter (UI=Unit Interval) Connector return loss Maximum reflected power Connector Single mode 9/125um F-P / DFB laser -7.5dBm @1310nm, 0dBm (DFB laser) 1310nm or 1550nm +/- 6nm 0 to +50 °C 0.135 UI max. @ 270Mbps, 0.2 UI max. @ 1485Mbps >40dB w/SM fiber 4% SC/UPC Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297, SMPTE 305.2M, SMPTE 310M DVB-ASI: EN50083-9 network-electronics.com | 143 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Converters HD-OE / HD-OE-L HD-OE-2 / HD-OE-L-2 HD-SDI Optical to Electrical Converter Dual HD-SDI Optical to Electrical Converter Distribution Amplifier Optical receiver Optical Input Optical receiver 2 x HD-SDI Output 19.4-1485Mbps Optical Input 1 1 x ASI / 2 x SD / HD Output 1 19.41485Mbps Reclocker Bypass 177M/ASI # Reclocker Optical receiver Distribution Amplifier 2 x HD-SDI Output 19.4-1485Mbps Optical Input 2 2x2 1 x ASI / 2 x SD / HD Output 2 19.41485Mbps Reclocker Bypass 177M/ASI Microcontroller • High sensitivity receiver • Built-in quad/dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/292M compliant • Multi mode version available Optical Input Data rate optical • High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • DVB-ASI compatible • Built-in crossover allowing wavelength swap and emergency switching • 2 Output Distribution Amplifier • Multiformat Re-clocking • Re-clocker bypass for non-video formats • Multi mode version available Optical Input 19.4 to 1485Mbps Data rate optical Sensitivity HD-SDI (1485Mbps) Better than –20dBm HD-OE-L Better than –24dBm SDI (270Mbps) Better than –25dBm HD-OE-L Better than –25dBm Detector overload threshold Min. -3dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC 19.4 to 1485Mbps Sensitivity HD-SDI (1485Mbps) Better than –20dBm HD-OE-L-2 Better than –23dBm SDI (270Mbps) Better than –25dBm Detector overload threshold min. -6dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss >40dB w/SM fiber Detector damage threshold >+1dBm Connector SC/UPC General GEneral Power +5V DC / 3W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment) Power +5V DC / 3.2W Max. Control Control system for access to setup and module status with BITE (Built-In Test Equipment) Electrical Output Electrical Output Number of outputs 4 (HD-OE-L has 2 outputs) Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 2 (1) non inverting, 2 (1) inverting Number of outputs 2 per converter Connector BNC Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter max 0.2UI Peak to peak signal level 0.8V ± 0.1V Signal polarity 1 non inverting Standards Standards Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI EN50083-9 HD-OE-L: Optical receiver Optical Input Remote Control Distribution Amplifier Reclocker 144 | network-electronics.com 2 x HD-SDI Output 19.4-1485Mbps Supported standards for electrical and optical ports: SMPTE 292M, SMPTE 259M, SMPTE 297M, SMPTE 305.2M, SMPTE 310M, DVB-ASI EN50083-9 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical Converters 2.1 AES-EO-13T/15T AES-OE AES Electrical to Optical Converter AES Optical to Electrical Converter Slicing & Filtering AES Input Limiter Optical Transmitter Optical Output Optical Input • Transport AES separately • 1310, 1550nm and CWDM versions • Electrical output for use in DWDM systems Inputs Signal format AES-3 (AES/EBU) Impedance 110 ohm (transformer balanced) Connector DB25 female (Tascam pin layout) Output Buffer Optical Receiver AES Output • Transport AES separately • Multi mode or single mode • 1200-1620nm input Output Signal format AES-3 (AES/EBU) Impedance 110 ohm (transformer balanced) Jitter < 20ns Connector DB25 female (Tascam pin layout) GEneral Power +5V DC / 1.5W Control RS-422 with protocol for use with GYDASC System Controller Control system has access to set-up and module status with BITE (Built-In Test Equipment) GEneral Power +5V DC / 1.4W Control RS-422 with protocol for use with GYDASC System Controller Control system has access to set-up and module status with BITE (Built-In Test Equipment) Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Maximum reflected power 4% Connector SC/UPC, Return Loss Better than 40dB Optical Input Sensitivity Better than –30dBm Max. input power -3dBm Optical wavelengths 1200-1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector SC/UPC, Return Loss Better than 40dB network-electronics.com | 145 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Time Division Multiplexers SDI-TD-MUX-4 SDI-TD-DMUX-4 SDI Time Division Multiplexer SDI Time Division De-multiplexer Equaliser SDI/ASI 270Mbps Reclocker Equaliser SDI/ASI 270Mbps 4x4 switch Equaliser SMPTE 346M-2000 Optical Receiver Optical Transmitter Optical Output Reclocker SDI/ASI 270Mbps Sign. generator TDM-DMUX TDM-MUX SMPTE 346M-2000 1.485 Gbps HD-SDI outputs 1.485 Gbps Optical Input 2x1 Changeover 1.485 Gbps Electrical Input 1.485 Gbps HD-SDI input Sign. generator Sign. generator Electrical Output Reclocker 4x4 switch Sign. generator Equaliser SDI/ASI 270Mbps Reclocker 2x1 switch Reclocker SDI/ASI 270Mbps 2x1 switch Reclocker SDI/ASI 270Mbps 2x1 switch Reclocker SDI/ASI 270Mbps 2x1 switch Reclocker SDI/ASI 270Mbps EDH Handling EDH Handling Microcontroller Microcontroller Remote Control • 4 -Channel SDI/DVB-ASI time division demultiplexer • Transparent to AES audio or data signals in the ­vertical ancillary data space • Built-in routing switcher provides channel swapping capability • GYDA-SC enabled for remote control • Multi mode available • 4 -Channel SDI/DVB-ASI time division multiplexer • Complies with SMPTE 346M-2000 standard for TDM of video, audio, data over HD • Uninterrupted signal transport by loss of any input feed at transmitter (MUX) • High performance optics for short and long haul applications with CWDM laser option Electrical input Electrical input Number of inputs 4 independent SD-SDI or DVB-ASI Data rate 270Mbps Equalization Automatic up to 225m typ. Impedance 75 ohm Return loss >15dB @ 270MHz Connector BNC Optical output Output signal HD-SDI with TDM payload acc. to SMPTE 346M-2000 Transmission circuit fiber Single mode 9/125um Light source F-P / DFB laser Optical power –7.5dBm @ 1310nm (F-P laser), 0 dBm (DFB laser) Optical centre wavelength 1310nm, 1550nm, CWDM acc. to ITU-T G.694.2 Max. wavelength drift ±20nm (F-P lasers), ±6nm (DFB lasers) Jitter (UI = Unit Interval) Max. 0.2UI @ 1485Mbps Connector return loss Better than 40dB w/ SM fiber Connector SC/UPC Electrical output Output signal HD-SDI with TDM payload acc. to SMPTE 346M-2000 Data rate 1485 Mbps Impedance 75 ohm Return loss >15dB @ 1485MHz Jitter (UI = Unit Interval) Max. 0.2UI Peak to peak signal level 0.8V ±0.1V Signal polarity Non-inverting Connector BNC GENERAL Temperature range 0 to +45 °C Power consumption +5V/3.5 W, +15V/1.0W Control RS-422, GYDA-SC enabled, SNMP Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 346M-2000, SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 297M, SMPTE RP165 DVB-ASI: EN50083-9 146 | network-electronics.com Remote Control Output signal HD-SDI with TDM payload according to SMPTE 346M-2000 Data rate 1485 Mbps Equalization Automatic up to 100m Impedance 75 ohm Return loss >15dB @ 270MHz Signal level Nom. 800mV Connector BNC Optical input Input signal HD-SDI with TDM payload according to SMPTE 346M-2000 Sensitivity Better than -25dBm Detector overload threshold Min. -6dBm Detector damage threshold > +1dBm Optical wavelength 1200–1620nm Transmission Circuit fiber Single mode 9/125um Multi mode 50/125um (option) Connector return loss Better than 40dB w/ SM fiber Connector SC/UPC Electrical output Number of outputs 4 independent SD-SDI or DVB-ASI Data rate 270Mbps Impedance 75 ohm Return loss >15dB @ 270MHz Jitter (UI = Unit Interval) Max. 0.2UI Peak to peak signal level 0.8V ±0.1V Signal polarity Non-inverting Connector BNC GENERAL Temperature range 0 to +45 °C Power consumption +5V/3.5 W, +15V /1.8W Control RS-422, GYDA-SC enabled, SNMP Standards Supported standards for electrical and optical ports: SMPTE: SMPTE 346M-2000, SMPTE 292M, SMPTE 259M, SMPTE 305.2M, SMPTE 297M, SMPTE RP165 DVB-ASI: EN50083-9 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION RF over Fiber Modules 2.1 LB-EO LB-OE L-band Electrical to Optical Converter L-band Optical to Electrical Converter step attenuator Optical Transmitter Optical Output L-band Optical Input 950-2150 MHz Optical Receiver Electrical Output 950-2150MHz LNB control Monitor Output LNB power supply LNB control Microcontroller Remote Control Microcontroller • Frequency range 950–2150 MHz • Remotely controlled digital gain and manual gain control with GYDA-SC system controller • Protocol transparent broadband transmission • F-type coaxial connector • High performance optics for short and long haul applications with CWDM laser option • Optical link budget up to 25dB • GYDA-SC enabled for remote control, status monitoring, error reporting and SNMP support RF Characteristics Monitor Output step attenuator Remote Control • Frequency range 950–2150 MHz • Remotely controlled digital gain and manual gain control with GYDA-SC system controller • Protocol transparent broadband transmission • F-type coaxial connector • High performance optics for short and long haul applications with CWDM laser option • Optical link budget up to 25dB • GYDA-SC enabled for remote control, status monitoring, error reporting and SNMP support RF Characteristics Frequency band width 950-2150 MHz Return loss >10dB Connector F-type Gain flatness ±1.5dB over entire band ±0.25dB at any 36 MHz Maximum usable input signal < -5dBm Maximum input signal without damage >+10dBm Inter modulation products < -55dBc with two carriers –20dBm input signal, 5dB Fiber loss Link gain 40dB 1dB compression (output) 0dBm Noise figure <10dB CNR >45dB with maximum input power @ 36MHz SFDR (typically -25dBm) >109dBc/Hz Optical Characteristics Wavelength 1310nm ± 10nm, 10 CWDM channels ± 2nm 1290, 1310, 1330, 1350, 1470, 1490, 1510, 1530, 1550 and 1570nm Transmission circuit fiber 9/125um single mode Connector SC/PC Power output -3dBm, 0dBm, +3dBm Other general standards for compliance with all products: EMC EN 55103-1, 55103-2 Frequency band width Return loss Connector Gain flatness Maximum output signal Inter modulation products Link gain 1dB compression (output) NF (5dB optical loss) CNR SFDR (typically -25dBm) 950-2150 MHz >10dB F-type ±1.5dB over entire band ±0.25dB at any 36 MHz < -5dBm < -55dBc with two carriers –20dBm input signal, 5dB Fiber loss 40dB 0dBm <15dB >45dB with maximum input power @ 36MHz >109dBc/Hz Optical Characteristics Wavelength 1270-1610nm Transmission circuit fiber 9/125um single mode Connector SC/PC Maximum input power -6dBm Other general standards for compliance with all products: EMC EN 55103-1, 55103-2 Environmental RoHS, WEEE LNB control 22kHz compatible GENRERAl Power +5V DC/3W, –15V DC/1.5W, +15V DC/1.5W GENERAL Power +5V DC/3W, –15V DC/1.5W, +15V DC/1.5W Environmental conditions Environmental conditions Operation temp. range 0°C – 45°C Operation without damage temperature range –10°C – 55°C Operation temp. range 0°C – 45°C Operation without damage temperature range –10°C – 55°C network-electronics.com | 147 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Datacom Interfaces ETH100 ETH1000 Fast Ethernet Converter Gigabit Ethernet Media Converter Electrical Output to DWDM Module Ethernet Switch w/1Mb Packet Buffer 2X 10/100 Mbps Twisted Pair Ethernet Optical Transmitter Optical Output Optical Transmitter Optical Output Physical interface ethernet 10/100/1000 Mbps Twisted Pair Ethernet Optical Receiver Optical Input Optical Receiver Optical Input Microcontroller • 1310, 1550nm and CWDM lasers • Electrical output for use in DWDM systems • Two electrical inputs • Onboard switch • Sensitivity better than –32dBm Optical input Sensitivity Better than –32dBm Optical wavelength 1200–1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector return loss Better than 40dB Detector damage threshold >+1dBm Max input power 0dBm Connector SC/UPC Optical output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Connector return loss Better than 40dB typ. Max.reflected power 4% Connector SC/UPC Ethernet 2 x 10BaseT/100BaseTx on RJ-45 connectors, compliant with IEEE 802.3 and IEEE 802.3u, speed auto sensing, auto MDI/MDI-X. Also available with DWDM laser General Power +5V DC/4W and –15VDC/0.1W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) 148 | network-electronics.com Remote Control • 10BaseT/100BaseTx/1000BaseT auto sensing, compliant with IEEE 802.3 and IEEE 802.3u, auto MDI/MDI-X • 1310nm, 1550nm, CWDM lasers • Receiver sensitivity Better than -25dBm • Card edge LEDs and GYDA-SC enabled • Low power (2W) • Multi mode version available Optical Input Sensitivity Better than –25dBm Optical wavelength 1200–1620nm Transmission circuit fiber Single mode 9/125um Connector return loss Better than 40dB Detector damage threshold >+1dBm Max input power –6dBm Connector SC/UPC optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Connector return loss Better than 40dB typ. Max.reflected power 4% Connector SC/UPC ethernet 10BaseT/100BaseTx/1000BaseT on RJ-45 connectors, compliant with IEEE 802.3 and IEEE 802.3u, speed auto sensing, auto MDI/MDI-X General Power +5V DC / 2W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION RS-422 and GPI D-422 D-422-MG RS-422 Data Transceiver RS-422 Data Transceiver with GPI Multiplexer Optical Transmitter RS422 2.1 Electrical Output to optional DWDM Module Optical Output CODEC RS422(1) RS422(8) Optical Transmitter GPO(1) Optical Output Multiplexer GPO(16) GPI(1) Optical Receiver Optical Input Electrical Output to optional DWDM Module Optical Receiver Optical Input GPI(16) Occupies two slots • Bi-directional RS-422 to optical converter • Transports from DC up to 115.2kbps • Low latency • 1310nm, 1550nm and CWDM • Electrical output for use in DWDM system Data inputs and outputs Signal format RS-422 Connector RJ-45 Bit Rate DC up to 115.2kbps Latency 400ns maximum single ­direction latency including 1m of fiber. ­Additional latency 5us/km of fiber. • 8 x RS-422 bi-directional data streams • 16 x GPI in each direction • Very low latency • CWDM laser type is optional • Electrical output for use in DWDM system Data inputs and outputs Signal format Connector Signal format Connector Bit Rate Latency General Power +5V DC /2.4W Control RS-422 with protocol for use with GYDASC System Controller. Control system has accessto set-up and ­module status with BITE (Built-In Test Equipment) Optical Input Sensitivity Better than –30dBm Max. input power –3dBm Optical wavelengths 1200-1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector SC/UPC, Return Loss Better than 40dB Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC 8 x RS-422 4 x RJ-45 16 x GPI / 16 x GPO DB 25 DC up to 115.2kbps 400ns maximum single ­direction latency including 1m of fiber. ­Additional latency 5us/km of fiber GENeRAL Voltage +5V DC Control RS-422/4W with protocol for use with GYDA-SC System Controller. Control system has access to set-up and module status with BITE (Built-In Test Equipment) Optical Input Sensitivity Better than –30dBm Max. input power -3dBm Optical wavelengths 1200-1620nm Transmission circuit fiber Multi mode 50/125um, Single mode 9/125um compatible Connector SC/UPC, Return Loss Better than 40dB Optical Output Transmission circuit fiber Single mode 9/125um Light source F-P/DFB Laser Optical wavelength (ver. 13T) 1310nm ± 40nm Optical power -7.5dBm Optical power (option) 0dBm Optical wavelength (ver. 15T) 1550nm ± 40nm Optical power (option) 0dBm Optical wavelength for CWDM See page 153 Optical power for CWDM modules 0dBm Jitter (UI=unit interval) 0.135 UI max. Connector return loss Better than 40dB typ. Maximum reflected power 4% Connector SC/UPC network-electronics.com | 149 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Automatic Protection Switching and Optical Distribution WOC-2-x-x Wideband Optical Coupler Optical Optical wavelength Optical bandpass Connector return loss Directivity Transmission circuit fiber Connector 2nd and 3rd opt. window (1310nm and 1550nm) 1270-1350nm and 1510-1590nm >40dB w/SM fiber >55dB Single mode 9/125 um SC/UPC Common Optical Fiber Combiner / Splitter X% of λ Optical Fiber 1 (100 – X)% of λ Optical Fiber 2 Split ratios and insertion loss ratios incl. connector losses: WOC-2-50-50 50%/50% 4.3dB/4.3dB WOC-2-90-10 90%/10% 1.4dB/11.7dB • Passive optical splitter module • 50/50 or 90/10 split ratio • For multiple distribution and linear tapped fiber busses • Directivity better than 55dB GEneral Power Control None None WOC-4-25 1x4 Wideband Optical Coupler Common Optical Fiber Optical Optical passband 1260-1620nm Split ratio 25%/25%/25%/25% Insertion loss with connectors Max 9dB over passband Max 7.5dB at 1310nm +/- 20nm and 1550nm +/- 20nm Transmission circuit fiber Single mode 9/125 um Connector SC/UPC Return loss >40dB typ w/SM fiber Directivity >55dB typ General Power Control None None 150 | network-electronics.com Combiner / Splitter 25% of λ Optical Fiber 1 25% of λ Optical Fiber 2 25% of λ Optical Fiber 3 25% of λ Optical Fiber 4 The WOC-4-25 is an all-optical Wideband Optical Coupler suitable for signal distribution to up to 4 sites at the same time. SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical switching and Wavelength Division Multiplexing 2.1 WOS-2x2 WDM-2 2x2 Wideband Optical Switch Wavelength Division Multiplexer Optical Fiber 1 Optical Fiber 2 Power Power SPDT Power Power Common Optical Fiber 1 1 1310nm + 1550nm 1+ 2 2 Common Optical Fiber 2 • Optical redundancy switch • Contolled via GPI alarm input, RS-422 or GYDA-SC Control System • Tally output • Latching and non-latching version available 1310nm WDM 1550nm • Two channels per fiber • Bi-directional traffic on the same fiber • Can be used as multiplexer and de-multiplexer • High-isolation available on request Optical Optical Optical wavelength Insertion loss Connector return loss Cross talk Repeatability Durability Switching time Transmission circuit fiber Connector 1290-1620nm 1.4dBtyp, max 2.1dB >40dB w/SM fiber <-80dB +/- 0.01dB 10 000 000 cycles 50ms typ. Single mode 9/125 um SC/UPC Optical wavelength Optical bandpass Insertion loss Isolation Directivity Transmission circuit fiber Connector Return loss Connector 2nd and 3rd opt. window (1310nm or 1550nm) 1280-1335nm and 1525-1575nm < 2dB > 17dB > 50dB Single mode 9/125 um >40dB w/SM fiber SC/UPC GEneral GENERAL Power +5V DC/ 1W Control Control system for access to setup and module status with BITE (Built-In Test Equipment) 2x2 Switch Main Position Power Control None None Example 2x2 Switch Standby Position Input 1 Output 1 Input 1 Output 1 Input 2 Output 2 Input 2 Output 2 Town A Town B Frame: FR-2RU-10-2 Frame: FR-2RU-10-2 Modules: 1 x WDM-2 1 x SDI-EO-13T OdBm 1 x SDI-EO-15T OdBm Modules: 1 x WDM-2 2 x SDI-OE-S or 2 x SDI-OE-L network-electronics.com | 151 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Multiplexing By using the all-optical Wavelength Division Comparison of WDM technologies Multiplexing (WDM) technique, simultaneous Flashlink Dense WDM/Coarse WDM DWDM (100GHz) CWDM transport of multiple signals on the same Max number of channels 16 fiber is possible. A standard 2-channel WDM solution enables transmission of two Standard ITU-T G.694.1 ITU-T G.694.2 independent signals on the same fiber. Channel spacing Both uni-directional and bi-directional configurations are possible, as the direction of any channel can be chosen to suit the 40 0.8nm 20nm Laser wavelength variation (0-40°C) ±0.16nm ±6.5nm Optical amplification Yes, EDFA No transport needs. CWDM systems can be built with 8 channels pr frame (upgradable to 16 ch.), or with 16 channels in one frame (requires dual optical converters for SD/HD). Systems incorporating DWDM are based on WDM Channel Overview the 8+1 architecture that has 8 channels per easy and cost efficient upgrade of capacity on the fiber as the demand grows. Optical multiplexers are available for systems with a wavelength count up to 40. Fiber Attenuation frame + 1 upgrade port, thereby enabling SMF – Single mode fiber, ITU-T G.652 A and B LWPF – Low water peak single mode fiber, ITU-T G.652 C and D SMF LWPF To ensure maximum third party O-band interoperability, the wavelengths used in both the CWDM as well as the DWDM systems are selected according to the standards 1250 1300 ITU-T G.694.1 for DWDM and E-band 1350 1400 S-band 1450 1500 Wavelength (nm) C-band L-band U-band 1550 1600 1650 ITU-T G.694.2 for CWDM. Optical multiplexing is format and protocol independent, so a mixture of different signals on the different wavelengths is 1310 straightforward. The only thing to bear in 2 ch WDM 1550 mind is that higher bit rate means a shorter maximum reach, and the optical budget should be calculated carefully. 1270 1470 1550 16 ch CWDM 1610 C-band 1530 152 | network-electronics.com 1565 40 ch DWDM SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Optical Multiplexing 2.1 Flashlink DWDM Wavelength Availability Chart acc. to ITU-T G.694.1 Channel (#) Center frequency (THz) Wavelength (nm) 20 192.0 1561.41 21 192.1 1560.61 22 192.2 1559.79 23 192.3 1558.98 24 192.4 1558.17 25 192.5 1557.36 26 192.6 1556.55 27 192.7 1555.75 28 192.8 1554.94 29 192.9 1554.13 30 193.0 1553.33 Wavelength Availability Chart 31 193.1 1552.52 acc. to ITU-T G.694.2 32 193.2 1551.72 33 193.3 1550.92 34 193.4 1550.12 Flashlink CWDM 1–8 and 9–16 Wavelength [nm] Wavelength [nm] Channel 1–8 Channel 9–16 1470 1270 35 193.5 1549.32 1490 1290 36 193.6 1548.51 1510 1310 1530 1330 37 193.7 1547.72 1550 1350 38 193.8 1546.92 1570 1370 39 193.9 1546.12 1590 1390 40 194.0 1545.32 1610 1410 41 194.1 1544.53 42 194.2 1543.73 43 194.3 1542.94 44 194.4 1542.14 45 194.5 1541.35 46 194.6 1540.56 47 194.7 1539.77 48 194.8 1538.98 49 194.9 1538.19 50 195.0 1537.40 51 195.1 1536.61 52 195.2 1535.82 53 195.3 1535.04 54 195.4 1534.25 55 195.5 1533.47 56 195.6 1532.68 57 195.7 1531.90 58 195.8 1531.12 59 195.9 1530.33 network-electronics.com | 153 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Multiplexing CWDM1–8 / CWDM9–16 CWDM System 16 independent channels Ch.9 . . . CWDM channel 9-16 Ch.16 Ch.1 . . . Ch.9 . . . CWDM channel 9-16 optical fiber Ch.16 CWDM channel 1-8 CWDM channel 1-8 Ch.1 . . . Ch.8 Ch.8 CWDM Also available in low-loss version (CWDM1–8L and CWDM9–16-L) Specifications Operation temperature 0–40°C Wavelengths See page 153 Transmission circuit fiber Single mode 9/125 um Connector Return loss Better than 30dB typ. Max. reflected power 4% Connector common port SC/UPC acc. to SMPTE-297M Connector common port (optional) FC/PC 1270 1470 1550 The CWDM system is based on 8-channel optical filters. 1 upgrade port for easy addition of more channels at a later stage. The wavelengths are chosen according to the ITU-T G.694.2 standard in order to ensure maximum interoperability. The wavelengths of the signal cards must correspond to the wavelengths of the optical filters, whereas the signal formats running on those wavelengths can be chosen to suit the signal transport needs. OPTICAL FILTERING, channels 1-8 and 9-16 Insertion loss any ch. (1-8) 5dB max total for both ends (low loss: 4dB) Insertion loss any ch. (9-16) 7dB max total for both ends (low loss: 6db) Insertion loss per upgrade port 2.0dB max Tx-Tx directivity -55dB Isolation adjacent ch. -25dB Isolation any other ch. -35dB 154 | network-electronics.com 1610 8 independent channels 16 independent channels optical fiber optical fiber SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Fiber Attenuation Optical Multiplexing 2.1 SMF – Single mode fiber, ITU-T G.652 A and B LWPF – Low water peak single mode fiber, ITU-T G.652 C and D SMF LWPF O-band 1250 1300 E-band 1350 1400 S-band 1450 1500 Wavelength (nm) C-band L-band U-band 1550 1600 1650 DWDM-8C 8-channel DWDM filter with upgrade port 1310 2 ch WDM 1550 1270 1470 1550 16 ch CWDM 1610 C-band 1530 1565 • The only modular DWDM system in the broadcast market that allows the customer to grow to 40 DWDM channels, other system have a limit of 16 channels • Same form factor as CWDM allows for increased frame density of DWDM cards • In its category the most up to date specification on the market • Passive device • Lowered initial investment cost yet still provides the flexibility to grow in the future 40 ch DWDM Optical specifications Channel plan (product suffix) Number of channels Up to 40 Available wavelengths See channel plan Connector SC/UPC Insertion loss (one matched pair, including connectors) 4.5dB max Insertion loss (common to upgrade) 0.8dB max Channel Spacing 100GHz Passband +/- 15.0GHz Adjacent Channel Isolation 25dB min Non-Adjacent Channel Isolation 40dB min Directivity 45dB min Return loss 45dB min PDL 0.25dB max Operating Temperature 0 – 55 OC Storage Temperature -40 – 85 OC Optical Power 300mW max Ch. 20 . . . Ch. 27 2 40 independent channels 40 independent channels DWDM 8C-1A 1 DWDM 8C-1B optical fiber Ch. 20 . . . Ch. 27 optical fiber DWDM-8C 1A Ch. 28 . . . Ch. 35 DWDM 8C-2A DWDM 8C-2B Ch. 28 . . . Ch. 35 DWDM-8C 2A Ch. 36 . . . Ch. 43 Ch. 44 . . . Ch. 51 Ch. 52 . . . Ch. 59 DWDM 8C-3A DWDM 8C-3B DWDM 8C-4A DWDM 8C-4B optical fiber DWDM 8C-5A 40 independent DWDM 8C-5B Ch. 36 . . . Ch. 43 Ch. 44 . . . Ch. 51 Ch. 52 . . . Ch. 59 DWDM-8C 3A DWDM-8C 4A DWDM-8C 5A DWDM-8C 5B 3 DWDM-8C 4B DWDM-8C 3B 4 Channel (#) Center frequency (THz) Wavelength (nm) 20 192.0 1561.41 21 192.1 1560.61 22 192.2 1559.79 23 192.3 1558.98 24 192.4 1558.17 25 192.5 1557.36 26 192.6 1556.55 27 192.7 1555.75 28 192.8 1554.94 29 192.9 1554.13 30 193.0 1553.33 31 193.1 1552.52 32 193.2 1551.72 33 193.3 1550.92 34 193.4 1550.12 35 193.5 1549.32 36 193.6 1548.51 37 193.7 1547.72 38 193.8 1546.92 39 193.9 1546.12 40 194.0 1545.32 41 194.1 1544.53 42 194.2 1543.73 43 194.3 1542.94 44 194.4 1542.14 45 194.5 1541.35 46 194.6 1540.56 47 194.7 1539.77 48 194.8 1538.98 49 194.9 1538.19 50 195.0 1537.40 51 195.1 1536.61 52 195.2 1535.82 53 195.3 1535.04 54 195.4 1534.25 55 195.5 1533.47 56 195.6 1532.68 57 195.7 1531.90 58 195.8 1531.12 59 195.9 1530.33 DWDM-8C 2B DWDM-8C 1B 5 network-electronics.com | 155 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 Optical Multiplexing DWDM-40C 40-channel DWDM multiplexer and de-multiplexer E/O Ch.1 Ch.2 Ch.3 Ch.4 Ch.1 Ch.2 Ch.3 Ch.4 Ch.5 Ch.6 Ch.7 Ch.8 Ch.5 Ch.6 Ch.7 Ch.8 Ch.9 Ch.10 Ch.11 Ch.12 Ch.9 Ch.10 Ch.11 Ch.12 Ch.13 Ch.14 Ch.15 Ch.16 Ch.13 Ch.14 Ch.15 Ch.16 Flashlink DWDM Wavelength Availability Chart acc. to ITU-T G.694.1 O/E O/E Channel (#) Center frequency (THz) Wavelength (nm) O/E 20 192.0 1561.41 21 192.1 1560.61 22 192.2 1559.79 23 192.3 1558.98 24 192.4 1558.17 25 192.5 1557.36 26 192.6 1556.55 27 192.7 1555.75 28 192.8 1554.94 29 192.9 1554.13 30 193.0 1553.33 31 193.1 1552.52 32 193.2 1551.72 33 193.3 1550.92 34 193.4 1550.12 35 193.5 1549.32 36 193.6 1548.51 37 193.7 1547.72 Dimensions 483x88x178mm (19”, 2RU) Channel spacing 100GHz within the C-band Wavelengths According to ITU-T G.694.1 Passband ITU +/- 12GHz Insertion loss paired mux/demux 6dB max Pair uniformity on pairs shipped together 1.5dB typ Adjacent ch. isolation 25dB Non-adjacent ch. isolation 40dB min Directivity 45dB min Connector SC/UPC Connector return loss Better than 40dB Polarisation Dependent Loss 0.25 dB max Max power 300mW Transmission circuit fiber Single mode 9/125 um 38 193.8 1546.92 39 193.9 1546.12 40 194.0 1545.32 41 194.1 1544.53 42 194.2 1543.73 43 194.3 1542.94 44 194.4 1542.14 45 194.5 1541.35 46 194.6 1540.56 47 194.7 1539.77 48 194.8 1538.98 49 194.9 1538.19 50 195.0 1537.40 51 195.1 1536.61 Uniform loss version for multi-stage EDFA application available on request. 52 195.2 1535.82 53 195.3 1535.04 54 195.4 1534.25 55 195.5 1533.47 56 195.6 1532.68 57 195.7 1531.90 58 195.8 1531.12 59 195.9 1530.33 E/O Digital Signal In E/O E/O E/O E/O E/O E/O E/O Ch.17 Ch.18 Ch.19 Ch.20 Ch.21 Ch.22 Ch.23 Ch.24 Flashlink DWDM 40 ch. MUX frame 40 independent channels optical fiber Flashlink DWDM 40 ch. DMUX frame Ch.17 Ch.18 Ch.19 Ch.20 Ch.21 Ch.22 Ch.23 Ch.24 Ch.25 Ch.26 Ch.27 Ch.28 Ch.25 Ch.26 Ch.27 Ch.28 Ch.29 Ch.30 Ch.31 Ch.32 Ch.29 Ch.30 Ch.31 Ch.32 Ch.33 Ch.34 Ch.35 Ch.36 Ch.33 Ch.34 Ch.35 Ch.36 Ch.37 Ch.38 Ch.39 Ch.40 Ch.37 Ch.38 Ch.39 Ch.40 O/E O/E O/E Digital Signal Out E/O O/E O/E O/E O/E C-band 1530 1565 40 ch DWDM The flagship of the optical transport platform is the 40-channel DWDMsystem, allowing for up to 40 signals on a single strand of optical fiber. Based on the standardised ITU-T G.694.1 channel spacing grid of 100GHz within the C-band, the 40-channel DWDM system has the same flexibility in signal formats and bit-rates as the 16-channel system using a channel spacing grid of 200GHz. The optical filtering is placed in a separate 2RU-frame doing all the filtering needed to multiplex or demultiplex the channels involved. The filtering is always sold as a corresponding pair of two frames, one for each end of the fiber. This is due to the fact that the filters are designed as a pair in order to optimise the optical characteristics of the filters and minimise insertion loss. The direction of any channel can be reversed so the system allows for maximum flexibility while designing your optical networks. Please contact your local Network Electronics’ sales representative to design the best solution for your needs. 156 | network-electronics.com • C-band 100GHz channel spacing according to ITU-T G.694.1 – ensures interoperability with other standards-based DWDM systems • Flat spectrum – the DWDM-40C is ideal for uni-directional use with Erbium Doped Fiber Amplifiers (EDFAs) • This all-optical device fits in a standard Flashlink frame – no maintenance needed, no power needed • Signals can be uni- or bi-directional – supports digital video and Gigabit Ethernet running on different wavelengths • Signal and bit-rate transparent – SDI, HD-SDI, Gigabit Ethernet and SDH/ SONET run independently on separate wavelengths SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION EDFA 2.1 EDFA-B-C 17dBm Erbium Doped fiber Amplifier – multichannel long-haul optical amplification • Full-band EDFA covers all 40 C-band DWDM channels (1528-1562nm) • Flat gain over whole spectrum, Ideal for multistage and full-band amplification • SDI Optimised, full broadcast performance – transports pathological SDI and HD-SDI signals without scrabling • Booster/in-line and pre-amp versions • The only modular EDFA available, Booster and pre-amp or two in-line EDFAs in the same frame • Very compact – occupies 3 slots in a Flashlink FR-2RU-10-2 frame • Very low power consumption, only 9W • Extensive parameter monitoring with Network Electronics GYDA-SC controller • Enables point-to-point transport of up to 40 uncompressed HD-SDI signals at long distances without electrical regeneration • Uni-directional device • Signal and bit-rate transparent EDFA Dimensions 3 Flashlink slots Input range 1529-1562nm Total optical input power -10dBm min, typ -6dBm Total optical output power +17dBm, +/- 1.5dBm Gain flatness @23dB gain 1.0dB Noise figure 6.0dB max over full band Polarisation dependent gain 0.5dB max Polarisation mode dispersion 0.5ps max Connector SC/UPC Input/output return loss Better than 35dB Power consumption +5V/9W max Transmission circuit fiber Single mode 9/125 um EDFA The Flashlink EDFA family introduced at NAB 2007 will enable broadcasters to maximize their investment in a DWDM infrastructure by providing multichannel, all-optical amplification. The EDFA family consists of a booster/ in-line amplifier and a low noise pre-amplifier. The full-band EDFA boosts up to 40 DWDM-channels enabling the distance covered by fiber backhaul to be maximized and allowing broadcasters to upgrade their signal distribution from SD to HD over DWDM without needing to invest in infrastructure upgrades such as optical-to-electrical-to-optical in-line signal regeneration. Such gains are even more impressive when EDFA technology is deployed in conjunction with the newly launching DWDM-40C. Network Electronics’ EDFA solution is extremely compact and extends the reach of the local network to remote locations, increasing functionality and lowering total cost of ownership. In addition, service providers offering traditional broadcast services over SDH/SONET can now deploy Flashlink EDFAs to increase the profitability and reach of their current infrastructure. network-electronics.com | 157 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 IP Gateways SDI-IP-GTW SDI TO IP GATEWAY The world market is going through a major change the way in which video content is moved around. The new way is by using the Internet Protocol (IP) over Telco networks, a technology currently deployed on the Internet and in corporate networks. The scalable and cost-effective IP networks offer an inherent flexibility of bandwidth: 10Mbps, 100Mbps, 1Gbps and 10 Gbps. This technology enables new applications and opportunities, for instance low delay uncompressed video on SDI using 270Mbps, MPEG-2 bandwidths of 1-50 MMbps, MPEG-4 part10 (H.264/AVC) SDI to IP Gateway The award winning IPTV gateway (SDI-IP-GTW) solution allows real time transport of uncompressed SDI digital video via IP over Wide Area Networks (WAN) where access to dark fiber or wavelengths is limited. Like other products in the Flashlink family, the SDI-IP-GTW provides uncompromising video quality with no signal degradation. An advanced forward error correction mechanism in accordance with Pro-MPEG Code-of-Practice #4 guarantees high quality of service. Application Areas: • Professional broadcast contribution • Video backhaul solutions • Live event coverage • SDI over Gigabit Ethernet/IP • IP protocol in accordance with Pro-MPEG CoP4 • Various Forward Error Correction modes, high QoS • Built-in frame synchronizer with advanced jitter suppression • Transparent to embedded AES audio or other ancillary data • Configurable as transmitter or receiver • Separated management Ethernet port with in-band management option • User friendly WEB/XML based remote control • Easy integration to NMS systems with SNMP support Video Interfaces Input SDI (SMPTE 259M) / SDTI (SMPTE 305M) Output 2 x SDI (SMPTE 259M) Connector Female BNC Bitrate 270Mbps SDI Clock Options Locked to Input Signal Genlock to external SDI input Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module Production Facility Features Video Encapsulation Pro-MPEG Forum COP-4 Forward Error Correction: Pro-MPEG Forum COP-4 Control and Management IP Network Live Sports Network Operations Center SDI IN SDI OUT 1 SDI OUT 2 TEST Type 10/100 Base-T Features Element control through HTTP/WEB. SNMP traps for integration with Network Management System (NMS) Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS-232 9 pin D-SUB Physical and Power Input Voltage 100-240V AC +/- 10% Input Voltage Option 48V DC Dimensions 1RU, ½-width 19’’ (WxDxH) 210x300x44.5mm (Two units in 19’’ 1RU rack space) Installation 19’’ rack mounting kit supplied IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE Environmental Conditions Operating Temperature Storage Temperature Relative Humidity 0°C - +50°C -20°C - +70°C 5% to 95% (non condensing) Compliance CE CE marked in accordance with 93/68/EEC (22/07/03) Directive UL Designed for UL approval Safety IEC60950 and EN60950 EMC EN55022, EN55024,EN6100-3-2 158 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION IP Gateways 2.1 ASI-IP-GTW ASI TO IP GATEWAY The ASI-IP-GTW provides a gateway solution for the transmission of compressed digital video content over IP networks. Being a member of the Flashlink product portfolio, the ASI-IP-GTW allows broadcast quality contribution and distribution of DVB ASI over Local Area, Metropolitan and Wide Area Networks. ASI to IP Gateway The unit allows carrying of up to 8 DVB ASI transport streams over a Gigabit Ethernet connection. Forward error correction in accordance with Pro-MPEG Code-of-Practice 3 increases robustness against packet loss and guarantees high quality of service. The ASI-IP-GTW handles transport streams carrying MPEG-2, MPEG-4 (H.264) and VC.1 standard and high definition compressed video. Transport Stream Interfaces Ports Connector Bitrate 4 DVB ASI. Optional 8 DVB ASI User configurable as inputs or outputs. License for 1,2,3,4 or 8 active ports Female BNC Max. 216Mbit/s Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module Total Transport Application Areas: Stream Rate Ethernet MTU Length • Professional broadcast distribution • Professional broadcast contribution • Live event coverage Max. 450 Mbps Max. 1500 bytes Stream Processing TS Encapsulation Forward Error Correction TS Processing Pro-MPEG Forum COP-3. Pro-MPEG Forum COP-3 Transparent Control and Management Venue SD/HD Video Video Compression Video Compression ASI Master Control / POP ASI Type 10/100 Base-T Features Element control through HTTP/WEB. XML Configuration import and export via HTTP. SNMP traps for integration with Network Management System (NMS) Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 DB9 male GigE ASI-IP-GTW ASI-IP-GTW FastE ASI-IP-GTW ASI-IP-GTW Physical and Power Input Voltage Input Voltage Option Dimensions Installation • DVB ASI over 100Base-T or 1000Base-T Ethernet • Transport stream encapsulation in accordance with Pro-MPEG CoP-3 • Flexible Forward Error Correction in accordance with Pro-MPEG CoP-3 • Up to 8 DVB-ASI transport streams in ½ 19” 1RU • Configurable as transmitter or receiver • Separated management Ethernet port with in-band management option • User friendly WEB/XML based remote control • Easy integration to NMS systems with SNMP support SDI IN SDI OUT 1 SDI OUT 2 TEST IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE 100-240V AC +/- 10% 48V DC 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm (Two units in 19’’ 1RU rack space) 19’’ rack mounting kit supplied Environmental Conditions Operating Temperature 0°C - +50°C Storage Temperature Relative Humidity -20°C - +70°C 5% to 95% (non condensing) Compliance CE CE marked in accordance with 93/68/EEC (22/07/03) Directive UL Designed for UL approval Safety IEC60950 and EN60950 EMC EN55022, EN55024,EN6100-3-2 network-electronics.com | 159 SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION 2.1 IP Gateways SDC-IP-GTW SDI TO IP GATEWAY – JPEG2000 Video Interfaces Input Output SDI (SMPTE 259M) SDI (SMPTE 259M) 2 main and 1 test outputs Connector Female BNC SDI Clock Locked to external SDI input The SDC-IP-GTW provides JPEG2000 compression of SDI signals, allowing costeffective transmission of high quality TV signals over Ethernet links. Application Areas: • Broadcast contribution with Ethernet connectivity • Studio-to-studio media exchange • In-house signal distribution and routing • Post-production • Live event coverage Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module (Option) Video Encoding Video Encoding IP Encapsulation IP Bitrate Forward Error Correction JPEG2000 MXF over RTP 5 to 100 Mbps Forward Error Correction based on ProMPEG Forum CoP-4 FEC Resolutions EBU Tech.3267-E, 2nd edition; 625 lines, 50 fields/s SMPTE 125M-1995 525 lines, 59.94 fields/s • High quality video • JPEG2000 compression • 10 bit video • Intraframe encoding • Robust transmission of SDI signals • Flexible Forward Error Correction • Error concealment • Very low delay • Encoding and decoding delay less than 100ms • Ancillary data support • Transparent transfer of embedded audio and vertical ancillary data • Compact, cost-effective solutions • Complete transmitter / receiver in 1RU • User configurable as transmitter or receiver • User-friendly configuration and control • WEB/XML based remote control • Easy integration to NMS systems with SNMP trap support • Software upgradeable to HD Audio and Ancillary data Audio formats Embedded audio (SMPTE 272M) Uncompressed, 16 channels, 20 bit Data formats Ancillary data (SMPTE 291M-1998) Transparent Audio/video delay +/- 1 line Control and Management Type 10/100 Base-T Ethernet Features Element control through HTTP/WEB. XML SNMP traps for integration with Network Management System (NMS). SNMP control. Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 9 pin D-SUB Physical and Power Input Voltage Input Voltage Option Dimensions Installation SDI IN SDI OUT 1 SDI OUT 2 100-240V AC +/- 10% -48V DC 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1RU rack space 19’’ rack mounting kit supplied TEST IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE Environmental Conditions Operating Temperature Storage Temperature Relative Humidity 0 °C – +50 °C -20 °C – +70 °C 5% to 95% (non condensing) Compliance CE 73/23/EEC (Low voltage equipment) 89/336/EEC (Electromagnetic compatibility) CSA Designed for CSA approval Safety IEC60950 and EN60950 EMC EN55022, EN55024, EN6100-3-2 160 | network-electronics.com SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION IP Gateways 2.1 HDC-IP-GTW-C/-D HD-SDI TO IP GATEWAY – JPEG2000 Video Interfaces Input HD-SDI (SMPTE 292M) SD-SDI (SMPTE 259M) Output HD-SDI (SMPTE 292M) 2 main and 1 test outputs Connector Female BNC SDI Clock Locked to external SDI input (SD/HD) The HDC-IP-GTW provides a gateway solution for the transmission of JPEG 2000 compressed HD-SDI content over IP networks. The HDC-IP-GTW is available as a encoder/decoder (codec, -C version) and as a cost effective decoder only version. The HDC-IP-GTW is a multi rate video gateway and will auto-sense SD or HD bit rates. Application Areas: • Professional broadcast contribution with Ethernet connectivity • Studio-to-studio media exchange • In-house signal distribution and routing • Post-production • Live event coverage Network Interfaces Type 100/1000Base-T Ethernet Protocols IEEE802.3 Ethernet RTP, ARP, IPv4, IGMPv2/3, TCP/UDP Connector RJ45 SFP Module (Option) Video Encoding Video Encoding IP Encapsulation IP Bitrate Forward Error Correction JPEG2000 MXF over RTP 25 to 200 Mbps Forward Error Correction based on ProMPEG Forum CoP-4 FEC HD Resolutions SMPTE 274M-2003 System 5 1920 x 1080/59.94/I SMPTE 296M-2001 System 2 1280 x 720/59.94 SMPTE 274M-2003 System 6 1920 x 1080/50/I SMPTE 296M-2001 System 3 1280 x 720/50 SMPTE 274M-2003 System D 1920x1080/24/PsF Audio and Ancillary data Audio formats Embedded audio (SMPTE 299M-1997) Uncompressed, 16 channels, 20 bit Data formats Ancillary data (SMPTE 291M-1998) Control and Management • High quality video using JPEG2000 compression • Robust transmission of HDTV signals • Very low delay • Ancillary data support • Compact, cost-effective solutions • User-friendly configuration and control • Autosensing SD/HD • Forward Error Correction • Codec version (-C) and decoder only (-D) version Type 10/100 Base-T Ethernet Features Element control through HTTP/WEB. XML SNMP traps for integration with Network Management System (NMS). SNMP control. Protocol HTTP, XML, SNMP v2 Connector RJ45 Alarm Relay 9 pin D-SUB Maintenance Port RS232 9 pin D-SUB Physical and Power Input Voltage Dimensions Installation SDI IN SDI OUT 1 SDI OUT 2 100-240V AC +/- 10% 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm. Two units in 19’’ 1RU rack space 19’’ rack mounting kit supplied TEST IN ACTIVE LED YELLOW : SDI IN LED GREEN : ACTIVE Environmental Conditions Operating Temperature Storage Temperature Relative Humidity 0 °C – +50 °C -20 °C – +70 °C 5% to 95% (non condensing) Compliance CE 73/23/EEC (Low voltage equipment) 89/336/EEC (Electromagnetic compatibility) CSA Designed for CSA approval Safety IEC60950 and EN60950 EMC EN55022, EN55024, EN6100-3-2 network-electronics.com | 161 FLASHLINK MICRO 2.1 Flashlink Micro Distribution Amplifiers Embedders / De-embedders Video Converters Audio Converters Synchronisation Modules Automatic Changeover Modules EO and OE Converters Datacom Interfaces One Flashlink card + One in-line power supply + One N-Box = Flashlink Micro Flashlink Micro, your ideal choice for desktop applications – High performance video/audio processing and fiber optics made simple Modules for desktop and stand alone applications have until now Maximum functionality been associated with medium-low to medium-high performance with The comprehensive Flashlink Micro range covers a wide variety of little or no reconfiguration possibilities. Well, those days are gone. functions: Interchangeable modules • Audio and Video conversion, processing and synchronisation • Distribution amplifiers – Initial cost savings combined with a future proof upgrade path • Fiber conversion of SDI and HD-SDI signals With Flashlink Micro, Network Electronics introduces the industry • Embedding/de-embedding standard Flashlink modules fitted in a compact and cost-effective • Datacom Interfaces housing for stand alone applications. As regular Flashlink modules are • Automatic changeover modules for redundancy used in the Flashlink Micro series it is no longer a trade off between form factor and module performance, the best of both worlds can Low power consumption finally be realised with Flashlink Micro. All Flashlink Micro modules are designed with low power Minimum setup time Flashlink Micro comes with an in-line brick power supply (redundant power optional, brick or rack-mount) so all you need is to connect consumption in mind. RUGGEDIZED enclosure design The combination of high reliability design philosophy and the signal- and power cables and the self-contained box is up and ruggedized enclosure design, means you can enjoy Flashlink Micro for running with full broadcast quality in no time. many years. Monitoring and configuration Future proof upgrade path Control features like on board status LED’s and GPI interface as well as Since the boards and back planes of Flashlink Micro are the same RS-422 interface for GYDA-SC control is standard on all modules. as in the Flashlink 2RU modular frame holding up to 10 modules, Re-configuration of the module is easily done with DIP-switches on the roadmap to future system expansion is crystal clear and straight the module itself or via the GYDA-SC system controller for Flashlink. forward. Interchangeable boards means that all modules in Flashlink Flexible mounting Micro automatically are compliant with relevant broadcast standards, as is the case for the Flashlink 2RU modular system. Various mounting options are available for increased mounting flexibility: In the next few pages you can see for yourself that Flashlink Micro • 1RU Tray for 4 Flashlink Micro modules meets or exceeds your expectations to modules for desktop or stand- • Wall mounting alone applications. • On table mounting • Under the table mounting • Angled wall-, on-table- and under-the-table-mounting • Stacking of Flashlink Micro modules 162 | network-electronics.com FLASHLINK MICRO Distribution Amplifiers 2.1 FM-DA-SDI SDI Distribution Amplifier • SDI/AES-3id support • Automatic bit rate detection • On-board cable equaliser • Non-video bitrate support In: 1 – Out: 8 More details, see page 113 FM-DA-AES FM-DA-VA Dual Digital Audio Distribution Amplifier Analog Video Multisignal Distribution Amplifier • Digital audio distribution amplifier • Configurable as Dual 1x4 or Single 1x8 • Reports signal presence • Supports sample rate from 15 to 96kHz • Supports bit rate from 16kbps to 14Mbps • DC to 200MHz analog video • 6 non-inverting outputs • Also suitable for SDI according to SMPTE-259M In: 1 – Out: 6 In: 1 or 2 – Out: 8 or 2x4 More details, see page 114 More details, see page 113 FM-DAC-MON FM-DA-AA SDI Distribution Amplifier w/Monitoring Output Dual Analog Audio Distribution Amplifier • 8-bit composite encoder and DA • 3 SDI and 3 composite outputs • Automatic standards detection • EDH monitoring • Analog audio distribution amplifier • Precision gain settings for -12 to +12dB • Allows mixing of 2 inputs in dual 1x4 mode • For balanced AC signals from 3.3Hz to 400kHz In 1 Out 3 re-clocked SDI and 3 NTSC/PAL composite In: 2 – Out: 8 More details, see page 114 More details, see page 115 network-electronics.com | 163 FLASHLINK MICRO 2.1 Embedders / De-embedders Also available with 75ohm AES-3id backplane FM-Av-MUX, FM-Av-MUX-13T FM-AV-DMUX, FM-AV-DMUX-R Digital Audio Embedder Digital Audio De-embedder • 4-channel 24-bit AES (8 mono audio) audio embedder • Automatic insertion of sample rate converters • EDH in accordance with SMPTE-RP165 • Embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES in- and outputs • Allows external sampling rates from 16-144kHz w/SRC enabled • Can be used as 4-CH embedder, 4-CH de-embedder or 2-CH de-embedder/embedder • 110ohm balanced and 75ohm unbalalanced version available • Optional with optical output (AV-MUX-13T) Also available with 75ohm AES-3id backplane • 4-channel 24-bit AES (8 mono audio) audio de-embedder • EDH in accordance with SMPTE-RP165 • De-embedding in acc. with SMPTE-272M giving maximum compatibility to 3rd party products • Transformer balanced AES outputs • 110ohm balanced and 75ohm unbalanced version available • Optional with optical input (AV-DMUX-R) More details, see page 117 More details, see page 117 FM-AAv-MUX, FM-AAv-MUX-13T FM-AAV-DMUX, FM-AAV-DMUX-R Analog Audio Embedder Analog Audio De-embedder • 4 channel analog audio embedder • 24 bit converters 107dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments with DIP switches • EDH insertion and handling • 20 or 24 bit embedding • Optional with optical output (AAV-MUX-13T) More details, see page 120 164 | network-electronics.com • 4 channel analog audio de-embedder • 24 bit converters 106dB(A) typical dynamic range • Cascadable for additional audio channels • Gain adjustments on DIP switches • EDH insertion and handling • Optional with optical input (AAV-DMUX-R) More details, see page 120 FLASHLINK MICRO Signal Processing and Synchronisation 2.1 FM-ADC-SDI FM-DAC-AES NTSC/PAL to SDI Decoder Dual Audio D/A Converter • 10-bit composite to SDI decoder • Automatic standards detection • EDH and field 1 ID insertion • 2x oversampling (27MHz) • Analog inputs w/ loop-through, 3 SDI outputs • 3-line adaptive comb filters and selectable filter settings • 24-bit high performance AES to analog audio converter • Two independent converters on one board • Typical dynamic range of 120dBA • Transformer balanced AES inputs • Allows sampling rates from 32–96kHz More details, see page 130 More details, see page 132 FM-ADC-SDI-CC FM-ADC-AES Video A/D Converter and Decoder Dual Audio A/D Converter • 10-bit component, composite or Y/C to SDI converter • Built-in video PROC-AMP • 3 SDI outputs • 24-bit high performance analog audio to AES converter • Two independent converters on one board • Typical dynamic range of 117dBA • 5 line adaptive comb filter and selectable filter settings • Automatic standards detection • EDH and field 1 ID insertion • Transformer balanced AES outputs • Internal sampling rates 44.1, 48 and 96kHz Also available with 75ohm AES-3id backplane More details, see page 132 More details, see page 130 FM-DAC-SDI FM-DLY-AES SDI to NTSC/PAL Encoder and D/A Converter Dual AES Audio Delay • 10-bit SDI to composite encoder and 10-bit SDI to component converter in one product • Built-in frame synchronizer w/ sub-carrier and horizontal phase adjustment • Large frame buffer (4 frames) • EDH monitoring • 4x oversampling (54 MHz) • SDI input w/ loop-through, 4 analog outputs More details, see page 131 • 2 independent audio delay signal paths • Built-in sample rate converter accepting 32, 41.1, 48kHz • Black-burst and AES-11 reference input • Up to 10s delay at 48kHz • Simultanous fixed delay and externally switchable dynamic delay • Delay tracking input for synchronisation with DAC-SDI, FRS-SDI or other video devices • 2 AES outputs per delay line • Transformer balanced AES in- and outputs More details, see page 133 FM-HDSDI-CHO-2x1 FM-LIS-SDI HD Change-over SDI Line Synchronizer • Multi-rate change-over • Non-broadcast data rates also supported non-reclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked HD/SDI outputs • SDI 10 bit 4:2:2 line synchronizer • Analog Black Burst genlock • EDH insertion and handling in accordance with SMPTERP165 • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 line synchronized outputs • Automatic detection of 525- and 625-line format input More details, see page 136 More details, see page 133 FM-SDI-CHO-2x1 FM-FRS-SDI SDI Change-over SDI Frame Synchronizer • SDI change-over • Non-broadcast data rates also supported non-reclocked • Auto change-over on signal loss or reclock error • Configurable change back logic • Reports signal loss and bitrate • GPI control and alarms • Integrated DA with 4 re-clocked SDI outputs • 2 inverted/2 non-inverted for DVB-ASI More details, see page 136 • SDI 10 bit 4:2:2 frame synchronizer with embedded audio handling • Analog Black Burst genlock • Selectable freeze on last good frame or black video on error or on loss of input signal • EDH insertion and handling in accordance with SMPTERP165 • Wide delay range, from 128us up to 232ms ­(Sample, H and V adjustment) • Audio delay tracking output • SDI 4:2:2 input with one active loop-through output • 3 x SDI 4:2:2 synchronized outputs • Automatic detection of 525- and 625-line format input More details, see page 134 network-electronics.com | 165 FLASHLINK MICRO 2.1 Optical Converters FM-SDI-EO-13T FM-SDI-OE-S SDI Electrical to Optical converter SDI Optical to Electrical converter • 1310nm Single mode • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/297M compliant • Sensitivity -20dBm • Max. input -6dBm • High sensitivity receiver • Built-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant More details, see page 137 More details, see page 139 FM-SDI-EO-2-13T FM-SDI-OE-2 Dual SDI Electrical to Optical converter Dual SDI Optical to Electrical converter • 1310nm –7.5dBm F-P laser • High-density packaging in the ultra compact 2RU frame • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Active looped SDI output • Sensitivity -20dBm • Max. input -6dBm • High sensitivity receiver • Built-in dual output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/297M compliant More details, see page 139 More details, see page 138 FM-HD-EO-13T FM-HD-OE HD-SDI Electrical to Optical converter HD-SDI Optical to Electrical converter • 1310nm Single mode • Built-in dual output Distribution Amplifier • High performance laser for the long haul • DVB-ASI compatible • SMPTE 259M/292M compliant • High sensitivity receiver • Built-in quad output Distribution Amplifier • DVB-ASI compatible • SMPTE 259M/292M compliant More details, see page 132 More details, see page 144 FM-HD-EO-2-13T FM-HD-OE-2 Dual HD-SDI Electrical to Optical converter Dual HD-SDI Optical to Electrical Converter • 1310nm Single mode • –7.5dBm F-P laser • High-density packaging in the ultra compact 2RU frame • High performance laser for the long haul • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • Multiformat Re-clocking • High-density packaging in the ultra compact 2RU frame • High sensitivity receiver • Full DVB-ASI compatibility • Built-in crossover allowing wavelength swap and emergency switching • 2 Output Distribution Amplifier • Multiformat Re-clocking • Re-clocker bypass for non-video formats More details, see page 143 More details, see page 144 166 | network-electronics.com FLASHLINK MICRO Datacom Interfaces 2.1 FM-ETH100-13T FM-ETH1000-13T Fast Ethernet Converter Gigabit Ethernet Media Converter • Transmitter and receiver on one card • 1310nm -7.5dBm F-P laser • Two electrical inputs • Onboard switch • Sensitivity Better than -32dBm • Transmitter and receiver on one card • 10BaseT/100BaseTx/1000BaseT auto sensing, compliant with IEEE 802.3 and IEEE 802.3u, auto MDI/MDI-X • 1310nm -7.5dBm F-P laser • Receiver sensitivity better than -25dBm • Card edge LEDs and GYDA-SC enabled • Low power (2W) More details, see page 148 More details, see page 148 Flashlink Micro Accessories N-BOX-CABLE Y-CABLE Cable Cable Cable for centralized powering of 4 x N-BOX, includes break-out for GYDA-SC control interface Y-cable – combine two power supplies for redundancy N-BOX-SH1RU N-BOX-PL1 1RU Shelf Mounting Plate 1RU shelf for up to 4 x N-BOX, including 3 front panels for empty slots Mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete with screw set N-BOX-PL2 N-BOX-PL3 Angled Mounting Plates Interconnecting Plate Angled mounting plate for N-BOX, allows wall, on-table, under-table mounting, complete set with 2 plates and screws Interconnecting plate for N-BOX, allows stapling of N-BOXes, complete set with 2 plates and screws network-electronics.com | 167 1RU COMPACT DISTRIBUTION AMPLIFIERS 2.1 Compact Distribution Amplifiers V0106DEQ SDI0106Q Video Equalising Distributor 1x6 Dual Serial Digital Distributor 1x6 Quad • Dual 1x6 Video • Differential inputs • Equalization for up to 300m cable • Gain range –1.8dB to +4dB • >25MHz Bandwidth • External DC control Specification Frequency response Differential gain Differential phase Video S/N Ratio 0–25MHz –3dB < 0.2% < 0.2° > 70dB, 100kHz – 5MHz, unweighted Gain –1.8dB to +4dB Number of inputs 2 looped, balanced Return loss > 40dB to 10MHz Number of outputs 2x6 Impedance 75 ohm Max signal 2 Vp-p Equalization 0–300m RG59U or equiv. Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU) 168 | network-electronics.com • Quadruple 1x6 SDI • D1 4:2:2 270Mbps component • D2 177Mbps PAL composite • High performance Broadcast Quality SPECIFICATION Data rate 143Mbps–270Mbps Min. signal level 0.25 nom.0.8V Max. signal level 4.5V Number of inputs 4 looped Number of outputs 4x6 Impedance 75 ohm Signal processing none Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU) 1RU COMPACT DISTRIBUTION AMPLIFIERS Compact Distribution Amplifiers 2.1 AV0110 A0108DS Analog Video Audio Distributor 1x10 Analog Stereo Audio Distributor 1x8 Dual • 1x10 Video/Audio • 100kHz Audio Bandwidth • 80MHz Video Bandwidth • Broadcast Specification • Studio, CCTV, Duplication AUDIO Frequency response 20Hz–100kHz ±0.1dB Crosstalk > –100dB THD+N < 0.003% SNR > 90dB ref. to 0dB 20Hz–20kHz Number of inputs 1 looped (stereo) Input impedance 47 k ohm Max. input level +22dBu Number of outputs 10 (stereo) Output impedance 66 ohm Connector RCA VIDEO Frequency response 0-80MHz –3dB Differential gain < 0.07% (3.58/4.43MHz) Differential phase < 0.1° (3.58/4.43MHz) Video S/N Ratio > 68dB Gain 0dB, ±0.1dB Number of inputs 1 looped Number of outputs 10 Impedance 75 ohm Return loss > 40dB Max signal 2 Vp-p Coupling DC Connector BNC AC power External power supply 100–260VAC (included) DC power ±15V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU) • Dual 1x8 Stereo • 100kHz Audio Bandwidth • Balanced inputs and outputs • Additional unbalanced inputs • Broadcast specification SPECIFICATION Frequency response 20Hz–100kHz ±0.1dB Crosstalk > –100dB THD+N < 0.003% SNR > 90dB ref. to 0dB 20Hz–20kHz Number of inputs 4 mono (2 stereo) Input impedance > 10 k ohm Max. input level +23dBu Number of outputs 4x8 mono (2x8 stereo) Output impedance > 66 ohm Connector DB25 female Gain adjustment ± 6dB Unbalanced inputs 4 mono Input impedance 47 k ohm AC power External power supply 100–260VAC (included) DC power ±15V, connector DB9 male Power consumption 9W max Dimensions 483x44x45 mm (19”, 1RU) network-electronics.com | 169 1RU COMPACT DISTRIBUTION AMPLIFIERS 2.1 Compact Distribution Amplifiers V0106Q AD0108Q Analog Video Distributor 1x6 Quad Quadruple Digital Audio AES/EBU Distributor • Quadruple 1x6 Video • PAL, NTSC, HDTV, YC, SVGA, RGBS • 500MHz Video Bandwidth • High performance Broadcast Quality SPECIFICATION Frequency response 0–500MHz –3dB Differential gain < 0.07% Differential phase < 0.22° Video S/N Ratio > 70dB Gain 0dB, ±0.1dB Number of inputs 4 looped Number of outputs 4x6 Impedance 75 ohm Return loss > 40dB Max signal 2 Vp-p Coupling DC Connector BNC AC power External power supply 100–260VAC (included) DC power ±5V, connector DB9 male Dimensions 483x44x40 mm (19”, 1RU) 170 | network-electronics.com • Quadruple 1x8 AES/EBU distributor • AES3, AES-3id / S/PDIF input • 48kHz compatible • Low jitter spec SPECIFICATION Signal type AES/EBU digital audio (Stereo) Balanced inputs 4x transformer coupled AES3-110 Signal amplitude 0,2 – 7Vp-p Connector DB25 female, impedance 110 ohm Unbalanced inputs 4x 75 ohm 1Vp-p unbalanced coax, SMPTE 276M Signal amplitude 100mVp-p to 1Vp-p Connector RCA, impedance 75 ohm Outputs 4x8 AES3-110 Signal amplitude 4Vp-p ± 1Vp-p Connector DB25 female, impedance 110 ohm Jitter 0.7ns Sampling rates 32 – 48kHz AC power External power supply 100–260VAC (included) DC power +5V, connector DB9 male Dimensions 483x44x45 mm (19”, 1RU) SIGNAL TRANSPORT, PROCESSING AND DISTRIBUTION Flashlink Accessories Single mode Patch Cords Order no. Description: SC/SPC-1 SC Patch Cord 1m SC/SPC-2 SC Patch Cord 2m SC/SPC-3 SC Patch Cord 3m SC/UPC-FC/PC-1 SC-FC Patch Cord 1m 2.1 Other accessories Order no. FR-Fan-1RU Description Fan for ventilation, 1 RU DB25Pin ­Adaptor Small print-card with DB25 to screw-terminal 3m x XLRM-25pin Network DB25pin Audio Contact to 8 x XLRM (Male), 3 meter cable 3m x XLRM-15pin Network DB15pin Audio Contact to 4 x XLRM (Male), 3 meter cable DB15-DB25 Cable Interconnect cable ADC-AES to AV-MUX-xxxx DB25-DB15 Cable Interconnect cable AV-MUX-xxxx to ADC-AES Power Supply For Flashlink Frame PWR-AC15/15/5/5V SC/UPC-SC/APC SC/APC Patch Cord (8O cut angle) 1m Other lengths or multi mode patch cords on request PWR-DC15/15/5/5V Power supply with 2 x 15V and 2 x 5V, 60W, input 110-260VAC auto-sensing, for spare or redundant supply Power supply with 2 x 15V and 2 x 5V, 60W, input 36-72VDC auto-sensing, for spare or redundant supply 3rd Party Interfaces Multiple 3rd Party Interfaces may be used in conjunction with the Flashlink optical product range. These interfaces further expand the variety of signal formats that can be transported on all our platforms: PtP, WDM, CWDM and DWDM PIGTAILS Order no.: SC/UPC Pigtail 1m SC/UPC Pigtail 2m SC/UPC Pigtail 3m ATTENUATORS Order no.: SC-Attenuators 5dB SC-Attenuator 10dB CleTop – fiber Cleaning Order no. Description: CleTop For cleaning your Fiber connections CleTop Tape Spare tape for CleTop CAT5 – Cables Order no. Description: CAT-5/SerPort-1 m Cable connection Frame to PC network-electronics.com | 171 VikinX Routers Since its introduction in 1996, the VikinX Compact range has dominated the marketplace through its simplicity, reliability and affordability. Today the product is one of the most deployed routing switchers in the world. Reliability VikinX Sublime The range was followed by VikinX Modular, a range of In 2006 we introduced VikinX Sublime, built to maintain and modular routing products that has been built with reliability extend our leadership in the market for small and medium and affordability as the most important design criteria. routing applications. VikinX Sublime raises the standard for reliability, affordability and flexibility in its segment. The reliability of the router, due to fully redundant control architecture and extremely low power consumption are The VikinX Sublime range offers the broadcast market the the major reasons why the VikinX Modular product can be most extensive range of matrix sizes available (8x8 to 64x64 found in the most mission critical applications. and 128x2) and covers signal formats from analog video/ Unmatched flexibility audio to HDTV also incorporating 1080p 3Gbps Single Link HD. In addition, VikinX Sublime provides many of the Another reason is the unmatched flexibility of the VikinX powerful control features that drove the VikinX Modular Modular control system, offering control features far beyond range to success. other comparable routing systems. VikinX Sublime offers flexible routing solutions for general As the only system available with full TCP/IP connectivity, purpose facilities and on-air routing as well as mobile outside VikinX Modular reduces the capital expenses necessary to broadcast applications and sophisticated A/V applications. install the system down to a minimum. Reliability through design simplicity as well as easy to Easy to use Network Electronics’ VikinX System Configurator is operate user interfaces keep the operational expenses at a developed to eliminate the obstacles installers and low level, thus resulting in low cost of ownership. operators face when setting-up and configuring complex routing solutions. One of the latest examples for easy- When adding the 256x256 VikinX Modular in 2006, the line to-use software is the VikinX System Configurator that of modular routing products offers a wide range of different accommodates wizards and convenient drag & drop menus frame sizes and signal formats covered. comfortably guiding the operator through the installation process. Together with Network Electronics’ proven routing hardware, the control system with all its control panel options and software features provides probably the most comprehensive and reliable routing switcher products in the business. VIKINX Sublime VikinX Sublime Marking a new era VikinX Sublime offers the broadcast industry the most extensive range of matrix sizes available (8x8 to 64x64 and 16x2 to 128x2) and covers signal formats from analogue video/audio to HDTV, with our SMPTE-292 HD products providing support for the 3Gbps dual link standard. A full range of 3Gbps single link HD products is available, underscoring our commitment to providing future-proofed products wherever possible. Flexible control solutions includes support for local and remote panels, equipped with professional broadcast quality programmable buttons. VikinX Sublime provides many of the powerful control features that have made the VikinX Modular range a success story. Control options such as serial control RS-232, Key features • Analogue video/audio, AES, SD-SDI, E4, STM-1 from 8x8 to 64x64 • Multiformat HD-SDI from 8x8 to 64x64 with support for 3Gbps Dual Link HD • Single Link 3Gbps HD from 8x8 to 32x32 • Non-square matrix sizes from 16x2 to 128x2 • Re-clocking and non-reclocking SD/HD-SDI • Control via Ethernet, RS-232, Network Control Bus (NCB) • Space saving 5cm (2in) frame depth allowing front and rear rack mount • Flexible matrix partitioning • Flexible local and external control panels with professional broadcast quality buttons • Programmable button configuration • External control panels providing multipurpose GPI/GPO • Ultra-low power, high-reliability design • Dual DC power inlet • Redundant power supplies (brick or frame) with front indicators • Signal diagnostics (signal presence, re-clocking, EDH) • Seamless interoperability with VikinX Modular routers • Sync with loop-through, tri-level on HD routers • Mounting trays for brick power supply Ethernet and Network Control Bus enable solutions from the VikinX Sublime range to fit into any application, from small production facilities up to large networks with centralized management through ETH-CON. In addition, numerous third party interface options allow the integration of VikinX Sublime at installations that employ proprietary vendor connectivity solutions. VikinX Sublime offers flexible routing solutions for general purpose facility and on-air routing as well as mobile outside broadcast applications and sophisticated A/V applications. network-electronics.com | 173 VIKINX SUBLIME 2.2 Analog Video SL-V6464 64x64 Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-V6464-CP) SL-V3232 32x32 Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-V3232-CP) • Analog Video Router • Partitioning (for square routers only) • SL-V1602: expandable up to 64x2 • Built in Control Panel Available • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers SL-V1616 16x16 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-V1616-CP) Specifications Frequency response 0–125MHz –3dB Differential gain 08x08, 16x16 32x32, 64x64 <0.1% (3.58/4.43MHz) <0.2% (3.58/4.43MHz) Differential phase 08x08, 16x16 32x32, 64x64 Crosstalk Video S/N Ratio Bar tilt <0.1° (3.58/4.43MHz) <0.2° (3.58/4.43MHz) < –60dB (3.58/4.43MHz) typ. 70dB, unweighted < 0.1% Lum. non-linearity 08x08, 16x16 <0.1% 32x32, 64x64 <0.2% Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2Vp-p Coupling DC DC offset <15mV Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male SL-V0808 8x8 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-V0808-CP) SL-V1602 16x2 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-V1602-CP) 174 | network-electronics.com VIKINX SUBLIME Analog Audio 2.2 SL-A6464 64x64 Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-A64643232-CP) SL-A3232 32x32 Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-A3232-CP) SL-A1616 16x16 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-A1616-CP) • Balanced stereo Analog Audio Router • Can be used for TimeCode routing • Built in Control Panel availbable • Partitioning (for square routers only) • SL-A1602: expandable up to128x2 • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers Specifications SL-A0808 8x8 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-A0808-CP) Frequency response 20Hz–20kHz ± 0.1dB Crosstalk 8x8, 32x32 64x64 <–100dBup to 20kHz <–90dB up to 20kHz (<–100dB up to 5kHz) THD+N < 0.01% @ +6dBu < 0.01% @ +22dBu Input impedance > 10 kohm CMRR > 60dB Output impedance < 66ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male SL-A1602 16x2 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-A1602-CP) network-electronics.com | 175 VIKINX SUBLIME 2.2 SD Digital Video SL-SD6464 64x64 Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-SD6464N-CP and SL-SD6464R-CP (with re-clocking)) SL-SD3232 32x32 Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-SD3232N-CP and SL-SD3232R-CP (with re-clocking)) • Serieal Digital Video Router • Available versions with or without reclocking • Available with integrated control panel • Control via IP/Ethernet, RS-232, NCB • Partitioning (for square routers only) • SL-SD1602: expandable up to 64x2 • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers • DVB-ASI compatible SL-SD1616 16x16 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-SD1616N-CP and SL-SD1616R-CP (with re-clocking)) Specifications Data rate NRZ 143Mbps–540Mbps Reference input Comp. Video 1Vpp, 300mV sync, 75 ohm Equalization Reclocked routers(R) Non-reclocked routers(N) 0 to 300m @ 270Mbps, typical Belden 8281 0 to 200m @ 270Mbps, typical Belden 8281 Re-clocking On R-versions only Impedance 75 ohm Return-loss in/out > 15dB (5MHz–540MHz) Signal level nom. 800mVp–p ±10% Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male SL-SD0808 8x8 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-SD0808N-CP and SL-SD0808R-CP (with re-clocking)) SL-SD1602 16x2 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-SD1602R-CP) 176 | network-electronics.com VIKINX SUBLIME 3G-HD Digital Video 2.2 SL-3GHD6464 64x64 Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD6464-CP) SL-3GHD3232 32x32 Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD3232-CP) SL-3GHD1616 16x16 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD1616-CP) • High Definition Video Router • Available with integrated control panel • Multiformat SD-SDI, HD-SDI and 3G-HD • Re-clocking on all standard video rates • Partitioning (for square routers only) • Single link 3Gbps, 1080p • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers • DVB-ASI compatible Specifications SL-3GHD0808 8x8 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD0808-CP) SL-3GHD1602 16x2 Data rate NRZ Reference input 143Mbps–2,970Gbps NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Equalization 0 to 100m @ 2,970Gbps, typical Belden 1694A Impedance 75 ohm Return-loss in/out < –15dB, 5MHz –1.5GHz < –10dB, 1.5GHz –3GHz Signal level nom. 800mVp-p ±10% Rise/fall time 20%–80% – SD limit: 0.4ns-1.5ns, <0.5ns rise/fall variation – HD limit: <270ps, <100ps rise/fall variation – 3G-HD limit: <135ps, <50ps rise/fall variation Connector BNC AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-3GHD1602-CP) network-electronics.com | 177 VIKINX SUBLIME 2.2 Digital Audio SL-AD6464-110 64x64 Dimensions: 483x176x50 mm (19”, 4RU) Also available with X-Y Control Panel integrated in the front (SL-AD6464-110-CP and SL-AD6464-75-CP) SL-AD3232-110 32x32 Dimensions: 483x88x50 mm (19”, 2RU) Also available with X-Y Control Panel integrated in the front (SL-AD3232-110-CP and SL-AD3232-75-CP) • Digital Audio Router – 110ohm • Available in ubalanced 75ohm version (BNC connectors) • Available with integrated Control Panel in front (CP version) • Set-up over IP based System Configurator • Partitioning (for square routers only) • SL-AD1602: expandable up to 128x2 • Control via IP/Ethernet, RS-232, NCB • 5cm (2in) frame depth allowing front and rear rack mount • Ultra-low power high-reliability design • Redundant power supplies (brick or frame) with front indicators • Interoperability with VikinX Modular range of routers SL-AD1616-110 16x16 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-AD1616-110-CP and SL-AD1616-75-CP) Specifications Signal type AES/EBU digital audio (Stereo) Input impedance 110ohm Output impedance 110ohm Jitter < 0.025UI Signal level 0.2 – 7Vp-p Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100–260VAC DC power +15V, connector DB9 male SL-AD0808-110 8x8 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-AD0808-110-CP and SL-AD0808-75-CP) SL-AD1602-110 16x2 Dimensions: 483x44x50 mm (19”, 1RU) Also available with X-Y Control Panel integrated in the front (SL-AD1602-110-CP and SL-AD1602-75-CP) 178 | network-electronics.com VIKINX SUBLIME RS-422 Data 2.2 SL-D32P 32 ports Dimensions: 483x88x50 mm (19”, 2RU) • Ported RS-422 data router • For flexible VTR/Device control • Ethernet/RS-232/NCB control • Configuration with IP based system configurator Specifications Data rate 115.2 kbs Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male network-electronics.com | 179 VIKINX SUBLIME 2.2 Sublime Accessories SL-PWR-40 40W Power Supply for VikinX Sublime router series SL-MT-2PSU SL-PWR-90 1 RU tray for 2x SL-PWR-40 or 1 x SL-PWR-90, to be placed behind the VikinX Sublime router 90W Power Supply for VikinX Sublime router series Can also be used with other sizes: SL-MT-BP Blindplate for 2 positions of SL-MT-6PSU SL-MT-6PSU 1 RU mounting tray for 6x SL-PWR-40 or 3 x PWR-90 DB25Pin Adaptor Small print-card with DB25 to screw-terminal 3mxXLRF-25PIN Audio Breakout Cable DB25pin XLRF, 3 meter cable 180 | network-electronics.com 3mxXLRM-25PIN Audio Breakout Cable DB25pin XLRM, 3 meter cable VIKINX MODULAR Redundancy 2.2 Power C Power D Any of 1–128 UPS Any of x-point 1–128 Main input source Output On-Air Main signal source redundant Any of 129–256 Any of x-point 129–256 Automatic change-over SYSCON SYSCON Power B Power A UPS A dead power supply can break down your whole router system. A To be able to fulfill the market requirements for mission critical damaged Ethernet Switch can create incorrect or no communication applications, Network Electronics includes redundancy in all our at all in your system. The signal path could be broken, leaving you products and solutions. You will find redundancy in the product itself, with no video output. the internal and external wiring, in 3rd party SNMP applications or redundancy by smart system design. Redundancy has always been a top priority in broadcast. On-Air 24/7/365 – this is the requirement. When designing products and Bear in mind Network Electronics’ vision of manufacturing low solutions for the broadcast industry, redundancy is a priority for power, compact and new technology products, software and Network Electronics. Technical error or interruptions in the program SNMP applications are used as enablers for redundancy. Software signal path are important to prevent. applications can keep overview of system condition, report abnormalities and take ACTION. Instead of bringing more hardware Redundancy is discussed in many areas of a broadcast installation, onboard, clever engineering and new technologies enable Network from redundant power systems, redundant system control, redundant Electronics to continue providing compact products with redundant signal path and more complex monitoring applications with SNMP designs at an affordable price. support. network-electronics.com | 181 VIKINX MODULAR 2.2 Modular Frames Widest range of signal formats VikinX Modular range of control panels provides one of the most Network Electronics’ VikinX family of modular routers accommodates sophisticated router control systems available. the widest range of signal formats, including HD-SDI, SD-SDI, analog audio, AES/EBU audio and telecom. Most of these signals can all be All routers can be controlled remotely through PCs, other mixed in the same frame. manufacturers control equipment or Network’s own THOR Windowsbased software. Independent of signal format, all components are front loaded and hot-swappable. VikinX Modular allows configurations up to 256 x New features are continuously added to make the use of the system 256 with increments of 32 x 32. even more simple and comfortable. Bridge Line Concept The steadily growing number of third party interfaces allows With the 256x256 VikinX Modular router Network Electronics installation of VikinX Modular routers in existing third party systems. introduces the Bridge Line Concept providing a 16 signal wide bus, Those systems can also be controlled from a VikinX Modular control allowing to route any signal in the router through Flashlink signal system including the THOR Windows software in order to obtain processing and fiberoptic devices that can be placed in dedicated all advantages provided by the Network Electronics router control slots in the router. system. Bridge-lines make it possible to internally switch line or frame- No compromise synchronizers, A/D and D/A converters or fiberoptical interfaces Heat and high power consumption are the enemies of any into the signal path, thus enabling signal error suppression, domain electrical device. Network Electronics’ routers have ultra low power conversion, fiberoptical conversion and trunking. consumption and air flow to provide best possible whorking TCP/IP Interconnectivity All VikinX Modular devices provide TCP/IP interconnectivity, an ideal conditions to a central router, securing reliability and maximum running time. way of operating a routing system from remote sites, independent of Frame sizes whether those are within a campus or on another continent. The VikinX Modular series comes in three frames sizes. Vikinx System Configurator The 5RU series (S) is for routers where space is at a premium and a Each control panel has its own database containing configuration files maximum of 64x64 cross points is needed. for the Software Configurable Keys. New configurations can easily be made using the VikinX System Configurator software tool. Everything is the same for the 9RU (M) series except it has space for up to 128x128 cross points. With the Expandable Panel Concept, allowing grouping of several panels into one logical control unit and the Customised Surface The 21RU (L) series still uses the same building blocks and provides Design, giving unlimited possibilities in designing user surfaces, the 256x256 cross points. A simple, elegant router design • High Reliability • Easy Upgrades • Easy Maintenance Physical Dimensions 483x400x340 mm (19”, 9RU) Physical Dimensions 483x924x340 mm (19”, 21RU) Physical Dimensions 483x220x340 mm (19”, 5RU) 182 | network-electronics.com VIKINX MODULAR Modular Frames Single Board Matrix Design – 32x32 matrix modules 2.2 Single Board Matrix Design – 32x32 matrix modules 2 x SYSCON 2 x Power Supplies 2 x SYSCON 2 x GYDA-VX 2 x Power Supplies The Simple, Elegant Design • High reliability • Low power consumption • Load sharing power supplies running at very low level • Minimum number of circuit modules • Minimum number of module interconnections • Redundant Fans with plenty of air-space and low noise Easy Serviceability • No active components on rear panel • All front loading, hot swappable modules • Minimal # of spares to stock • Easy upgrade to larger matrix sizes A Control System Architecture for today’s needs Features • 2 Power Supplies (4x in L) – Redundant and load sharing (single PSU (2x in L) included in the router price) • 2 System Controllers SYSCON – System controller for all VikinX modular routing switchers (single SYSCON included in the router price) – Redundant and Dual Level Control with different protocols – Crosspoint Configuration on flash card – Dual Sync Inputs – Simultaneous switching of entire matrix • Built-in monitoring matrix with 1 output per 32x32 block • Internal Bridge Lines for advanced processing and fiber (256x256 only) • SD-SDI, HD-SDI and AES digital audio routing in one frame • Mixed 525/625 operation • Tri-Level Sync • Independent Ethernet and serial ports – Fully Redundant Internal Control Architecture • 2 Status, monitoring, alarming modules GYDA-VX – Optional router control module – Signal diagnostics – Redundant SNMP and Web-based interaction A router with the complete set of features • Meets all relevant SMPTE specifications • Includes SNMP, Web tools • High level of Redundancy Simple and familiar interconnect • Works very well for small systems • Works very well for larger arrangements – grow with facility • Supports remote sites extremely well Control Interfaces Serial ports: 2x RS-232/422/485 with standard SYSCON 2x RS-232/422/485 with redundant SYSCON Connector DB9 female Ethernet ports: 1x 10/100Base-T with standard SYSCON 1x 10/100Base-T with redundant SYSCON 1x 10/100Base-T with standard GYDA-VX 1x 10/100Base-T with redundant GYDA-VX Connector RJ45 Power Supplies AC Range 90-130VAC / 180-254VAC switchable, 50-60Hz, 300W Connector IEC 320, separate input for each power supply DC Range 36-72VDC, 300W Connector Screw terminal Alarm Power Alarm Relay contact closure Connector RJ45 Cooling Type Internal forced air network-electronics.com | 183 VIKINX MODULAR 2.2 SD Digital Video VD256256L Serial Digital Video Routers Electrical Signal Inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization SMPTE 259M 19.4Mbps – 540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5-540MHz) 0 to 300m typical Belden 8281 Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss 75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5-540MHz) Reference Inputs Number of Inputs 2 standard, both reference signals supplied to both SYSCON when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field Selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output. Physical Dimensions 483x924x340 mm (19”, 21RU) 184 | network-electronics.com VIKINX MODULAR HD Digital Video 2.2 HD256256L High Definition Digital Video Routers Electrical Signal Inputs Standard Data Rate Connector Impedance Return Loss Cable Equalization SMPTE 292M 19.4Mbps – 1485Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz-1.5GHz) 0 to 100m typical Belden 1694A Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss 75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5MHz-1.5GHz) Reference Inputs Number of Inputs 2 standard, both reference signals ­supplied to both SYSCON when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output. Physical Dimensions 483x924x340 mm (19”, 21RU) network-electronics.com | 185 VIKINX MODULAR 2.2 SD Digital Video VD128128M / VD6464S Serial Digital Video Routers Electrical Signal Inputs VD128128M Standard Data Rate Connector Impedance Return Loss Cable Equalization SMPTE 259M 19.4Mbps – 540Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5-540MHz) 0 to 300m typical Belden 8281 Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss 75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5-540MHz) Reference Inputs Number of Inputs 2 standard, both reference signals supplied to both SYSCON128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field Selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output. VD6464S 186 | network-electronics.com VIKINX MODULAR HD Digital Video 2.2 HD128128M / HD6464S High Definition Digital Video Routers Electrical Signal Inputs HD128128M Standard Data Rate Connector Impedance Return Loss Cable Equalization SMPTE 292M 19.4Mbps – 1485Mbps 75 ohm BNC female 75 ohm nominal > 15dB (5MHz-1.5GHz) 0 to 100m typical Belden 1694A Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss 75 ohm BNC female 800mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5MHz-1.5GHz) Reference Inputs Number of Inputs 2 standard, both reference signals ­supplied to both SYSCON-SM when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. Information regarding performance of incoming signal, EDH on each signal path can be presented on one common surveillance and monitoring output. HD6464S network-electronics.com | 187 VIKINX MODULAR 2.2 Analog Audio A128128M / A6464S Analog Stereo Audio Routers A128128M Electrical Signal Inputs Type Balanced Connector DB25 female Impedance > 10 kohm CMRR > 60dB Max. level +23dBu Electrical Signal Outputs Type Balanced Connector DB25 female Impedance < 66 ohm CMRR > 40dB Max. level +23dBu Gain adj. 1.0dB (compensation for 600 ohm load) Performance Frequency response Adjacent crosstalk SNR THD+N Click noise 20Hz – 125kHz (-3dB), 20Hz – 20kHz ±0.1dB > 100dB, 20Hz – 20kHz < -90dBu(A) < 0.01% at 6dBu < -50dBu Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX A6464S 188 | network-electronics.com VIKINX MODULAR Digital Audio + Telecom 2.2 AD128128M / AD6464M Digital Audio, AES/EBU Routers Electrical Signal Inputs Type Connector Impedance Signal level Reference Inputs Transformer balanced DB25 female 110 ohm > 0.2 – 7Vpp Electrical Signal Outputs Type Connector Impedance Transformer balanced DB25 female 110 ohm Performance Sampling rates 32–96kHz Switching mode Asynchronous Jitter Typical 800ps Number of Inputs 2 standard, both reference signals ­supplied to both SYSCON-128 when used in redundant mode Connectors 75 ohm BNC female, loop-thru Return Loss > 40dB (100kHz – 5MHz), >35dB (5-10MHz) Signal Format NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Signal Level Nominal 1.0Vp-p Field selectivity Odd / Random field selectable Timing Range Adjustable in 1 line steps Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. T128128-140/155M / T6464-140/155S 140/155Mbps Telecom Routers Electrical Signal Inputs Standard ITU G.703 CMI Data Rate 140Mbps / 155Mbps Connector 75 ohm BNC female Impedance 75 ohm nominal Return Loss > 15dB (5-540MHz) Cable Equalization 0 to 300m typical Belden 8281 Electrical Signal Outputs Connector Signal Level Signal Polarity Impedance Return Loss 75 ohm BNC female 1000mVp-p ±10% Non-inverting with respect to inputs 75 ohm nominal > 15dB (5-540MHz) Reference Inputs Number of Inputs Connectors Return Loss Signal Format Signal Level 2 standard, both reference signals ­supplied to both SYSCON-128 when used in redundant mode 75 ohm BNC female, loop-thru > 40dB (100kHz – 5MHz), >35dB (5-10MHz) NTSC or PAL Black Burst or HD Tri-Level acc. to SMPTE 274M, SMPTE 276M Nominal 1.0Vp-p Alarm Interfaces Card Edge LEDs, RS-232/422/485 with open protocol, SNMP Agent and WEB interface with GYDA-VX. network-electronics.com | 189 VIKINX CONFIGURATION, CONTROL AND MONITORING 2.2 VikinX Configuration, Control and Monitoring Along with the broad range of VikinX routing switchers, Network database in an easy removable Compact Flash card. SYSCON Electronics provides numerous possibilities to either direct or provides both serial and Ethernet/IP interfaces. The IP connectivity remote control of all switching devices. From simple single bus and allows operating a routing system from remote sites, independent X-Y control panels for smaller applications to advanced IP control of whether those are within a campus or on another continent. Our panels, SNMP control and web client for highly flexible large router intelligent IP control panels automatically obtain the IP address of the applications, there is always a control set-up that fits the needs of redundant SYSCON in case there is an error on the main controller. your application. System Configurator Software SNMP control With the GYDA-VX monitoring and control device we are offering New panel configurations can easily be made using the VikinX System signal diagnostics on a user friendly web interface as well as Configurator software tool, developed to eliminate the obstacles SNMP control, allowing our routers to be controlled by a Network installers and operators face when setting-up and configuring Management System. complex routing solutions. The VikinX System Configurator accommodates wizards and convenient drag & drop menus Intelligent CONTROL panels comfortably guiding the operator through the installation process. Intelligent control panels accommodate features and user interface Router Controller flexibility that typically require a huge selection of different products. With the VikinX panels you can create an unlimited number of With the VikinX Modular router controller SYSCON we have taken different user interfaces exactly fitting your operational requirements. system security onto new heights. Through our fully redundant Each control panel has Software Configurable Keys allowing simple control architecture, from the independent control ports on the operation like Single Bus or X-Y, but also complex Multi-Level / router to the crosspoint switch controller, we can offer the highest Multi-Crosspoint operations. The Expandable Panel Concept allows reliability possible in a routing system. The SYSCON control grouping of several panels into one logical control unit. Customised system completely avoids single points of failure, like changeovers, Surface Design is giving unlimited freedom in designing button lay- centralized main controllers or similar. SYSCON retains the system outs. Web Panel Web Panel was developed to simplify the use of routers in a computer-based environment. Network Electronics’ System Configurator contains a given number of web panel templates available to the user, fully configurable with all the features offered in the company’s VikinX IP based hardware control panels. Web Panel works with browsers like Firefox, Safari, and Opera and provides a control interface compatible with Windows, Mac and Linux. Web Panel features: • Web Panel server features include: – Install to a single Windows web server – Activity log – Client log-in via standard web browser – IP verification for IT security • Web Panel client features include: – Platform independent, router control from PC, MAC or Linux – Web panel templates, software configurable keys – Router access according to user rights – No software installation required on client computer – Advanced router control features 190 | network-electronics.com VIKINX CONFIGURATION, CONTROL AND MONITORING Direct and remote control 2.2 Numerous possibilities for both direct and remote control of all components … through the use of panels, PCs, SYSCON, GYDA, other manufacturers control equipment and THOR Site 3 Video L1 Site 2 Video L1 CP MDP Video L2 Video L2 2 x CP 16 LCD 2 x CP 16 LCD 2 x CP 44 MEC 2 x CP 44 MEC Video L3 Video L3 CP 44 MEC and CP 16 LCD CP 44 MEC and CP 16 LCD CP 16 LCD CP 16 LCD CP 44 MEC CP 44 MEC THOR Additional Control Internet Site 1 CP MDP THOR VikinX Compact routers and control panels Network Control Bus (NCB) Router Management System VikinX System Configurator Ethernet THOR RS232 ETH-CON VikinX Sublime routers VikinX Sublime control panels 3rd party control and router systems For direct control of the VikinX compact routers, Network Electronics GYDA-VX gives the modular routing line a comprehensive alarming/ has developed a flexible and expandable range of compact panels. surveillance and SNMP control. GYDA-VX is available both as single For the VikinX modular routers, Network Electronics offers a range of controller and dual redundant controller. IP-based control panels that allows the use of standard Ethernet LAN. To further allow for flexibility, the ETH-CON enables compact routers The THOR router management system is a Windows-based router and control panels to interconnect with the modular control system. control system for the VikinX compact and modular router series. Thus the modular control panels can be used to control compact THOR offers a wide and modular range of features that provides routers and the advanced features of the modular control system are complete control and multiple configuration options. made available for compact routers. The SYSCON cards contain the configuration database for the modular routers and optionally for the panels on an easily replaced Compact Flash card. network-electronics.com | 191 VIKINX CONFIGURATION, CONTROL AND MONITORING 2.2 Control and Monitoring SYSCON-256 / SYSCON-128 / SYSCON-64 GYDA-VX SYSCON GYDA System System CPU 400MHz Intel PXA255 StrongARM Memory Compact Flash Electrical Interfaces 2 x RS-232 or RS-422 control ports on DB9F conforming to IBM PC (RS-232) or SMTPE207M (RS-422) 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable Power Consumption CPU 400MHz Intel PXA255 StrongARM Memory Compact Flash Electrical Interfaces 1 x 10BaseT/100Base-TX fast ethernet, full duplex capable Power Consumption +5V, typ. 400 mA. Maximum 3W +5V, typ. 400 mA. Maximum 3W GYDA-VX 192 | network-electronics.com • WEB interface tool for router monitoring and control, SNMP Agent. • WEB interface HTTP ver. 1.1, HTML ver. 4.01, compatible with all major browsers, SNMP ver. 3.0, User Based Security Model • Monitoring and control features available on both user interfaces • Signal presence detection on inputs • Reading Re-clocker lock and lock rate 143,177,270,360,540, 1485/1483.5 on all outputs • SYSCON Error • EDH Monitoring • Possibility for separated Ethernet connections for monitoring and control VIKINX CONFIGURATION, CONTROL AND MONITORING Ethernet Connections 2.2 Eth-CON ETH-CON Ethernet connectivity for VikinX Compact and Sublime routers. Control, configure or monitor your infrastructure from anywhere VikinX Compact routers and control panels Network Control Bus (NCB) Router Management System VikinX System Configurator Ethernet THOR RS232 ETH-CON VikinX Sublime routers VikinX Sublime control panels 3rd party control and router systems network-electronics.com | 193 VIKINX CONFIGURATION, CONTROL AND MONITORING 2.2 Modular Control Panels Expandable Panel Concept 2 x CP 16 LCD interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus. CP 16 LCD and CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus. 2 x CP 44 MEC interconnected via the EPC bus will logically appear as one panel on the VikinX modular control bus. Customised Surface Design All buttons in use… Extra overlay ready for customising comes with every IP-based Control Panel. The overlay has half stamped holes for the buttons, making it easy to customise. SCK – Software Configurable Keys EPC – Expandable Panel Concept CSD – Customised Surface Design Example of customised panel CSD (Customised Surface Design) gives you a greater freedom in designing your specific user surface. With CSD you can remove keys that you find unnecessary, create functional blocks, as you need them and still get a professional looking panel. 194 | network-electronics.com VIKINX CONFIGURATION, CONTROL AND MONITORING Modular Control Panels 2.2 CP-44-MEC CP-16LCD 44 Software Configurable Buttons 16 Software Configurable LCD-Buttons • 44 Software configurable mechanical buttons Control Interfaces • 16 software configurable LCD buttons with 36x24 pixels Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45 Ethernet ports 1x 10/100Base-T Connector RJ45 Power Supplies Power Supplies AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male Physical Dimensions Physical Dimensions 483x44x45 mm (19”, 1RU) 483x44x45 mm (19”, 1RU) For all VikinX Modular Control Panels: • Tri-color button illumination • Ethernet panel bus • Expandable Panel Concept (EPC) RS-232 port • 16 GPI ports / 16 GPO ports network-electronics.com | 195 VIKINX CONFIGURATION, CONTROL AND MONITORING 2.2 Modular Control Panels CP-MDP-CL CP-MDP-BW Master Display Panel Master Display Panel • 64 software configurable buttons • Easy exchangeable labelling • 320x240 QVGA color display • Customised Surface Design (CSD) option • Video preview (optional) • 64 software configurable buttons • Easy exchangeable labelling • 320x240 QVGA b/w display • Customised Surface Design (CSD) option • Video preview (optional) Control Interfaces Control Interfaces Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45 Control Interfaces Ethernet ports 1x 10/100Base-T Connector RJ45 Power Supplies Power Supplies AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male AC Range 90-254VAC, 50-60Hz, 10W Connector IEC 320 DC Range 36-72VDC, 10W Unit Power Voltage +5V DC Connector DB9 male Physical Dimensions Physical Dimensions 483x44x45 mm (19”, 2RU) 483x44x45 mm (19”, 2RU) Video Preview on Control Panel CP-MDP The Master Display Panel (CP-MDP) includes a high resolution QVGA Typical use for this application is preview before “Take”. display screen where live video can be presented. “Signal presence”, To enable video streaming to the MDP Panel, an external Video or confirmation of video content, can be presented with a frequency Server is required. The Network Electronics certified video server is a of 7 pics per second. Moxa VPort 2110. Note: The video series is NOT provided by Network Electronics. Master Display Panel (CP-MDP) Ethernet Ethernet Control and preview Ethernet Preview 7 pics per second Optional DA converter With preview Analogue video Video Server (Moxa VPort 2110) 196 | network-electronics.com VIKINX CONFIGURATION, CONTROL AND MONITORING Sublime Control Panels Multibus X-Y Control Panel 2.2 Dualbus Control Panel For router size: 16x2 Panel 1RU 2RU Router 16x16, 8x8 32x32 4RU 64x64 Singlebus Control Panel All VikinX Sublime Control Panels: • Ethernet/RS-232/NCB control • Programmable • Size: 19inch – 1RU, 2RU or 4RU – depth 5cm Optional GPI Panel 1RU 2RU Router 32x32, 16x16, 8x8 64x64 network-electronics.com | 197 VIKINX CONFIGURATION, CONTROL AND MONITORING 2.2 Compact Control Panels Singlebus Control Panels Multibus X-Y Control Panels Sizes offered: 32 and 64 • A/V Breakaway function • Audio follow video funtion • Legendable buttons • Panel enable function • Take function Sizes offered: 32x32 and 64x64 • A/V Breakaway function • Audio follow video funtion • Legendable buttons • Panel enable function • Take function GPI/Tally/Joystick Control Panels Universal, Multilevel Control Panels Sizes offered: 32x32 and 64x64 • GPI or joystick operation • GPI-CP with single bus panel • Comprehensive user options • Tally output • 2x16 character alphanumeric display • 8 level A/V breakaway control • Panel enable fundtion Control System • Up to 50 Routers and Control Panels per system • Network Control Bus in all Routers and CPs • RS-232 port in all Routers and CPs • De-centralized control architecture • Local, independant sub-systems • PC/IP/Remote access possibilities over RS-232/Ethernet (via ETH-CON) • Open protocol; you may write your own software VikinX Compact Control Panels, Reference Guide Router \ CP Singlebus Multibus (X-Y) CP-UNI GPI / Tally Joystick (w/CP) VikinX.32 (1RU) Remote (2RU) Remote (1RU) Remote (2RU) Remote VikinX.64 (2RU) Remote (4RU) Remote (1RU) Remote (4RU) Remote CAV8 / CAV16 (1RU) Remote Remote / Local (1RU) Remote (1RU) Remote 198 | network-electronics.com VIKINX CONFIGURATION, CONTROL AND MONITORING VikinX System Configurator Powerful features The VikinX System Configurator features include: • Unified configuration tool for VikinX Modular,VikinX Sublime, ETH-CON & GYDA 2.2 Full TCP/IP interconnectivity VikinX is the only system available with full TCP/IP interconnectivity. The VikinX router range minimises initial investment cost, and operating expenses, resulting in very low cost of ownership. • Easy system set-up through simple Wizard and Drag & Drop menus • Auto-detecttion of all hardware with listing in main menu • Interactive help menu Guided installation The new VikinX System Configurator provides wizards and convenient drag & drop menus that comfortably guide the operator through the installation process. Eliminate the obstacles The VikinX System Configurator is the company’s software tool The most comprehensive and reliable routing switcher solutions developed to eliminate the obstacles installers and operators face, Together with Network Electronics’ proven routing hardware VikinX when setting-up and configuring complex routing switcher solutions. Modular and VikinX Compact, plus the new VikinX Sublime range of routing switchers, the new software solutions provide the most Advanced help menu whereever you are in the configuration process. comprehensive and reliable routing switcher solutions in the business. Selecting help will answer your questions related to your current configuration area. The manual is available as print-out. The system configurator is made to eliminate the obstacles installers and operators face when settingup and configuring complex routing switcher solutions. network-electronics.com | 199 VIKINX CONFIGURATION, CONTROL AND MONITORING 2.2 THOR THOR is the Windows-based router control system for the VikinX router series RS232 • Detect your router system automatically Network Control Bus • Control your routers with drag & drop interface • Lock and protect your crosspoints • Switch up to 16 virtual levels simultaneously Ethernet THOR system requirements: • WinNT, Win2000, WinXP • Intel Pentium III 500 MHz Ethernet Ethernet • 128 MB RAM and 50 MB hard disk space Ethernet • SVGA video adapter and monitor THOR BASIC EDITION All editions have the following basic functions and configuration possibilities: • Router sizes up to 64x64 Control Functions • Matrix Views • Crosspoint Lock and Protection • Salvo THOR STANDARD EDITION pa c re at u e C O N TR OL GU I Matrix view • • • • Fe in Ti el iu em Pr St a nd Ba Fu n c t ion al i ty si c ar m d k Configuration • Mnemonics and Icons Upgrade 1 Drag & Drop router control • • • Virtual Router Mapping (Multilevel control) • • • Configurable Control GUI • TieLines manager • CONTROL FEATURES Crosspoint protection (lock, protect and prohibit) • • • • Salvos • • • • Salvo time scheduling • Categories and Groups • • • Crosspoint logging • • • COMMUNICATION FEATURES Single Computer to compact routers (RS-232) • • • • Single computer to modular routers (TCP/IP) • • • • Multiple computers on LAN • • • Remote computer on LAN or modem (PC to PC) • 3rd party interface (protocol converting) (PC to device) • CONFIGURATION FEATURES Router configuration • • • • Mnemonics and icons • • • • User Management with login • • • 64x64 64x64 NO NO N.A. Router size limitation 200 | network-electronics.com • Router sizes up to 64x64 Includes: • Basic Edition • Drag & Drop Router Control • Categories and Groups • Crosspoint Logging • Virtual Router Mapping (Multilevel Switching) • User Management THOR PREMIUM EDITION • No router size limitation Includes: • Standard Edition • Multiple computers on LAN Upgrade 3 THOR TIELINE EDITION • No router size limitation • Includes: Premium Edition TieLines Manager Upgrade 2 VIKINX CONFIGURATION, CONTROL AND MONITORING THOR 2.2 Ext r a f e at u res These features are available in THOR if extra control GUI or communication are needed. Some communication features need extra hardware (included in the price). CONTROL GUI FEATURES Salvo Scheduler COMMUNICATION FEATURES LAN Multi User Interface Ethernet Interface to VikinX Compact Hardware adapter Routers and VikinX Sublime (RS-232 to Ethernet converter) ETH-CON 3rd Party Interface ETH-CON G Salvo Scheduler • Timed salvo takes with salvo scheduler • Advanced reoccurrence options (hourly, daily, weekly and more) • Execute many salvos in a timed sequence with salvo sequence editor Advanced Remote Control • PC (Modem) to PC (Modem) • PC (Modem) to Device Server Device Server Client Client Client THOR THOR THOR G Ethernet Interface to VikinX Compact aND VikinX Sublime • Direct connection of a VikinX Compact and VikinX Sublime Router with/without panel to Ethernet • Includes hardware adapter • More details on ETH-CON, see p. 35 MASTER G LAN Multi User Interface (Standard Edition only) • Graphical Editor for making custom design router control views • Windows Internet Explorer HTML based control interface F 3rd Party Interface • We support 3rd party interfaces by protocol converting • Includes ETH-CON as protocol interface Client THOR G Advanced Remote Control Special router control solutions • PC (Modem) to PC (Modem), remote THOR Client, connect to Master PC (must include LAN Multiuser) • PC (Modem) to Device Server, remote serial port by modem connection network-electronics.com | 201 VIKINX COMPACT 2.2 Small and Medium-sized Routers Analog VIDEO Analog AUDIO COMPONENT Analog VIDEO Network Electronics’ compact VikinX routers embody the company’s pioneering spirit by providing a ground-breaking price to performance ratio in a feature-rich range. The units’ unparalleled ultra-thin housing was designed to accommodate facilities where real estate is at a premium. Configurations, ranging from 8 x 4 to 64 x 64, address every application from broadcast to corporate to post-production. 202 | network-electronics.com VIKINX COMPACT Small and Medium-sized Routers 2.2 DIGITAL VIDEO DIGITAL AUDIO TELECOM RS-422 DATA PARTITIONING TABLE Router Size (square) FORMAT 64 32 Composite Video 64x64 32x32 Y/C (SVHS) 32x32 16x16 RGB/YUV 21x21 10x10 RGB/sync 16x16 8x8 Power Supply All VikinX Compact Frame It is possible to reconfigure the switch groups routers are supplied with a single for all routers in the Compact Router Line via desk-top power supply included the configuration switch on the back-plane to in the price. create several formats of routers. network-electronics.com | 203 VIKINX COMPACT 2.2 Analog Video V6464 V3232 64x64 32x32 Specifications Specifications Frequency response 0-125MHz -3dB Differential gain typ. 0.08% (3.58/4.43MHz) Differential phase typ. 0.08° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ.70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2 Vp-p VIT input 1Vpp, 300mV sync, 75ohm DC offset typ. < 15mV Propagation delay 15ns ± 1ns Coupling DC Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU) • Power down memory • RS-232 Interface • Network Control Bus 204 | network-electronics.com Frequency response 0-125MHz -3dB Differential gain typ. 0.06% (3.58/4.43MHz) Differential phase typ. 0.06° (3.58/4.43MHz) Crosstalk < -60dB (3.58/4.43MHz) Video S/N Ratio typ.70dB Bar tilt < 0.1% Lum. non-linearity < 0.1% Impedance 75 ohm Return loss typ. 40dB @ 10MHz Max signal 2 Vp-p VIT input 1Vpp, 300mV sync, 75ohm DC offset typ. < 15mV Propagation delay 9ns ± 1ns Coupling DC Connector BNC AC power External power supply 100–260 VAC DC power ±5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU) • Power down memory • RS-232 Interface • Network Control Bus VIKINX COMPACT Analog Audio 2.2 A6464 A3232 64x64 32x32 Specifications Specifications Frequency response Crosstalk Clicknoise THD+N SNR Number of inputs 20Hz-100kHz ± 0.1dB > -100dB typ. <50dBu < 0.005% > 90dB ref. to 0dB 20Hz-20kHz 64 (Stereo) electronically balanced Input impedance >10 kohm Max input level +23dBu CMRR >75dB Max. input level + 23dBu Number of outputs 64 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU) • 100kHz Audio Bandwidth • Power down memory • Programmable format • RS-232 Interface • Network Control Bus • Also usable as Time Code router A6464 is also available as mono. This unit is called A6464 Mono. Frequency response 20Hz-100kHz ±0.1dB Crosstalk > -100dB Clicknoise < 60dBu THD+N < 0.005% SNR > 90dB ref. to 0dB 20Hz-20kHz Number of inputs 32 (Stereo) electronically balanced Input impedance > 10kohm Max input level + 23dBu CMRR > 75dB Number of outputs 32 (Stereo) electronically balanced Output impedance 66 ohm Audio connector DB25 female AC power External power supply 100–260 VAC DC power ±15V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU) • 100kHz Audio Bandwidth • Power down memory • Programmable format • RS-232 Interface • Network Control Bus • Also usable as Time Code router network-electronics.com | 205 VIKINX COMPACT 2.2 Component Analog Video If our routers were any thinner We could ship them in envelopes Component Analog Video Everything you want in a compact feature-rich design, including: • Seamless tri-step switching • External control system compatibility • Typ. 0–110/130MHz / -3dB@0dBm input signal • Audio breakaway possible • Up to 1600 x 1200 resolution • Built-in RS-232 interface • Built-in professional control panel Available in configurations of RGBHV, plus stereo analog audio. Sizes include 16x16, 16x8, 8x8, 8x4. Configurations The following formats may be configured (analog stereo audio and built-in control panel are both optional): 16x16 RGBHV + AA + CP 16x8 RGBHV + AA + CP 8x8 RGBHV + AA + CP 8x4 RGBHV + AA + CP 206 | network-electronics.com VIKINX COMPACT Component Analog Video 2.2 CAV0808 / CAV0804 CAV1616 / CAV1608 8x8 / 8x4 16x16 / 16x8 Video specifications Frequency response Number of inputs Number of outputs Video specifications typical 0–110MHz / -3dB @ 0dBm input signal 8 8 or 4, depending on model Audio specifications (Optional) Number of inputs Number of outputs 8 (Stereo), true balanced 8 or 4 (Stereo), depending on model, all true balanced General Max. power consumption Dimensions Frequency response Number of inputs Number of outputs typical 0–130MHz / -3dB @ 0dBm input signal 16 16 or 8, depending on model Audio specifications (Optional) Number of inputs Number of outputs 16 (Stereo), true balanced 16 or 8 (Stereo), depending on model, all true balanced General <20W 483x132x35 mm (19”, 3RU) Max. power consumption Dimensions <40W 483x264x35 mm (19”, 6RU) CAV0808 / CAV0804 / CAV1616 / CAV1608: Video specifications Differential gain typical 0.1% (3.58/4.43MHz) Differential phase typical 0.2° (3.58/4.43MHz) Crosstalk < -55dB (3.58/4.43MHz) Video S/N Ratio typical 70dB Bar tilt < 0.1% Lum. Non-linearity < 0.1% Impedance 75 ohm Return loss typical 38dB Max signal 2 Vp-p Coupling DC DC offset typ. 5mV Propagation delay 5ns ± 1ns Connector BNC Switching Seamless w/variable delay 2-5s, or VIT, selectable via DIP-switches. PAL/NTSC selection on DIP-switches. VIT loop Audio specifications (Optional) Frequency response Crosstalk Click noise THD+N SNR Input impedance CMRR Max. Input level Output impedance Connector 20Hz-100kHz ± 0.1dB > -100dB < 60dBu < 0.003% > 100dB ref. to 0db 20Hz-20kHz > 10k ohm > 75dB + 25dBu 66 ohm DB25 female Panel specifications (Optional) Salvos Programmable/executable on panel General AC Power External power supplies 100 – 260 VAC DC Power ±15V, connector DB9 male, equipped with 2x DB9 connectors network-electronics.com | 207 VIKINX COMPACT 2.2 SD Digital Video VD6464 VD3232 64x64 32x32 Specifications Specifications Data rate NRZ 143Mbps–540Mbps VIT Input Comp. Video 1Vpp, 300mV sync, 75ohm Equalization Automatic up to 300m (Belden 8281) Impedance 75 ohm Return loss in/out > 18dB (10MHz–270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x264x100 mm (19”, 6RU) • D1 4:2:2 270Mbps Component • 143Mbps NTSC Composite • D2 177Mbps PAL Composite • Up to 540Mbps Data rate • Input Equalization • Network Control Bus • Power down memory • RS-232 Interface • DVB-ASI compatible 208 | network-electronics.com Data rate NRZ 143Mbps–540Mbps VIT Input Comp. Video 1Vpp, 300mV sync, looped, 75ohm Equalization Automatic up to 300m (Belden 8281) Impedance 75 ohm Return loss in/out > 18dB (10MHz–270MHz) Signal level nom. 800mV Rise/fall time typ. 700ps Connector BNC AC power External power supply 100–260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU) • D1 4:2:2 270Mbps Component • 143Mbps NTSC Composite • D2 177Mbps PAL Composite • Up to 540Mbps Data rate • Input Equalization • Network Control Bus • Power down memory • RS-232 Interface • DVB-ASI compatible VIKINX COMPACT Digital Audio 2.2 AD6464-110 AD3232-110 64x64 32x32 Specifications Signal type AES/EBU digital audio Number of inputs 64 transformer balanced Input impedance 110 ohm Number of outputs 64 transformer balanced Output impedance 110 ohm Jitter 800ps Delay 170ns Signal level 0.2 – 7Vpp Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100 or 260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU) Also available as unbalanced 75 ohm (AD6464-75) • 110 ohm balanced in- and outputs • 96kHz compatible • Sampling rates 32–96kHz • Power Down Memory • Programmable format • Network Control Bus • RS-232 Interface Specifications Signal type AES/EBU digital audio Number of inputs 32 transformer balanced Input impedance 110 ohm Number of outputs 32 transformer balanced Output impedance 110 ohm Jitter 800ps Delay 170ns Signal level 0.2 – 7Vpp Sampling rates 32 – 96kHz Switching mode Asynchronous Audio connector DB25 female AC power External power supply 100 or 260 VAC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU) Also available as unbalanced 75 ohm (AD3232-75) • 110 ohm balanced in- and outputs • 96kHz compatible • Sampling rates 32–96kHz • Power Down Memory • Programmable format • Network Control Bus • RS-232 Interface network-electronics.com | 209 VIKINX COMPACT 2.2 Telecom T6464-34/45 T3232-34/45 64x64 32x32 • 34Mbps or 45Mbps Data rate • Input Equalization • Output-Reclocking • Meets ITU-T G.703 for HDB3 signals • RS-232 Interface • Network Control Bus Specifications Specifications Data rate 34Mbps – 45Mbps G.703 HDB3 Equalization Automatic, up to 200m (Belden 8281) Impedance 75 ohm Re-clocking On outputs Return loss > 16dB (10MHz–270MHz) Signal level 1000 mV fixed, 75 ohm load Connector BNC AC Power External power supplies 100–260 VAC DC Power ±5V, connector DB9 male Max power consumption < 17.5W Dimensions 483x616x120 mm (19”, 14RU) • Input Equalization • Network Control Bus • RS-232 Interface 210 | network-electronics.com Data rate 34Mbps–45Mbps G.703 HDB3 Equalization Automatic up to 200m (Belden 8281) Re-clocking on outputs Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power ±5V, connector DB9 male Dimensions 483x308x100 mm (19”, 7RU) • Input Equalization • Network Control Bus • RS-232 Interface VIKINX COMPACT Telecom 2.2 T6464-140/155 T3232-140/155 64x64 32x32 • 140Mbps or 155Mbps Data rate • Input Equalization • Non-Reclocking • Meets ITU-T G.703 for CMI signals • RS-232 Interface • Network Control Bus Specifications Specifications Data rate 140Mbps – 155Mbps G.703 CMI Equalization Automatic, up to 200m (Belden 8281) Impedance 75 ohm Return loss > 16dB (10MHz – 270MHz) Signal level 1000 mV fixed, 75 ohm load Connector BNC AC Power External power supplies 100–260 VAC DC Power +5V, 2 pin Molex Connector Max power consumption < 80W Dimensions 483x264x120 mm (19”, 6RU) • Input Equalization • Network Control Bus • RS-232 Interface Data rate 140Mbps–155Mbps G.703 CMI Equalization Automatic up to 200m (Belden 8281) Impedance 75 ohm Return-loss > 16dB Signal level 1000mV fixed on 75 ohm load Connector BNC AC power External power supply 100–260 VAC Power option 24–72V DC DC power +5V, connector DB9 male Dimensions 483x132x100 mm (19”, 3RU) • Input Equalization • Network Control Bus • RS-232 Interface network-electronics.com | 211 VIKINX COMPACT 2.2 RS-422 Data D3232 32x32 Specifications Data rate 5Mbps Connector DB9 female AC Power External power supply 100–260VAC DC Power +5V, connector DB9 male Dimensions 483x220x35 mm (19”, 5RU) • Machine and edit control • State of the art quality • Power down memory • For production systems • RS-232 Interface • Network Control Bus 212 | network-electronics.com 2.2 network-electronics.com | 213 VIKINX ACCESSORIES 2.2 VikinX Accessories All Network Electronics products have a single desktop power supply included in the unit price. Below you will find some options for single or redundant power supply in 19”-2RU. Order no. Description: FR-PWR-1S Frame, 1 x Motherboard and 1 x Power Supply, handles up to 5 VikinX devices FR-PWR-1R Frame, 1 x Motherboard and 2 x Power Supplies, handles up to 5 VikinX devices FR-PWR-2S Frame, 2 x Motherboards and 2 x Power Supplies, handles up to 10 VikinX devices FR-PWR-2R Frame, 2 x Motherboards and 4 x Power Supplies, handles up to 10 VikinX devices FR-PWR-3S Frame, 3 x Motherboards and 3 x Power Supplies, handles up to 15 VikinX devices FR-PWR-3R Frame, 3 x Motherboards and 6 x Power Supplies, handles up to 15 VikinX devices FR-PWR-4S Frame, 4 x Motherboards and 4 x Power Supplies, handles up to 20 VikinX devices FR-PWR-4R Frame, 4 x Motherboards and 8 x Power Supplies, handles up to 20 VikinX devices Specify Power Cables (quantity of each type) when ordering FR-PWR-xx. See below. 19”-2RU power supply frame can be equipped with up to 4 Motherboards, where each Motherboard can house up to 2 power supplies (single or redundant) of all VikinX equipment (routers, amplifiers, converters) up to the VikinX.32 Router Family, as well as AD6464-110 and A6464 Mono. For A6464 Stereo, please specify PSU’s for each Mono frame! Power Cables for FR-PWR-xx DC-DC-+/-5V Cable, 1,5m (5 ft.), interconnects FR-PWR-xx and VikinX devices +/-5V Typical products: VIDEO DC-DC-+/-15V Cable, 1,5m (5 ft.), interconnects FR-PWR-xx and VikinX devices +/-15V Typical products: AUDIO FR-PWR-2R-V Rack mount Redundant PSU solution for V6464 and AD-6464-75. Frame, 2 x Motherboards and 4 x Power Supplies, incl. dedicated DC/DC PSU-Router cable FR-PWR-3R-VD Rack mount Redundant PSU solution for VD6464. Frame, 3 x Motherboards and 6 x Power Supplies, incl. dedicated DC/DC PSURouter cable Each motherboards have 5 DC power outlets. GPI Alarm per power supply included. Each power supply gives 60W. Autosensing 100-240VAC. Please call for 48V DC solutions. Note that all routers and control panels are supplied with single desktop power supply as standard. UPGRADE AND SPARE PARTS MODULES Power Supply Module for FR-PWR-xx PWR-AC Power supply with 2 x 15V and 2 x 5V, 60W, 15/15/5/5V input 110-260VAC auto-sensing, for spare or redundant supply PWR-DC Power supply with 2 x 15V and 2 x 5V, 60W, input 15/15/5/5V 36-72VDC, for spare or redundant supply Backplane for power supply modules for FR-PWR-xx BCK-PL Backplane for Power Supply Modules for FRPWR-xx, can hold 2 x PSU modules Fan FR-Fan-1RU PWR-AC15/15/5/5V 214 | network-electronics.com Fan for ventilation, 1 RU. Please call for further instructions. VIKINX ACCESSORIES VikinX Accessories DESKTOP Power Supply Units (PSU) NUMBER ITEM DESCRIPTION AC DESKTOP POWER FOR VIKINX SUBLIME 12876 SL-PWR-90 For SL-HD6464-R/-CP, SL-SD6464R/-CP, SL-A6464/-CP , SL-A3232/-CP, SL-V6464/-CP 12450 SL-PWR-40 For all other Sublime Routers AC Desktop Power For VikinX Compact 12450 SL-PWR-40 For A3232, A6464 Mono A6464 (1 router requires 2 units. Must be ordered separately) 16675 DP AC +/-5V / 35W For AD3232-75, AD3232-110, AD6464-75, AD6464-110 12450 SL-PWR-40 For CAV0804, CAV0808, CAV1608, CAV1616, incl. Variants 16675 DP AC +/-5V / 35W For D3232 16675 DP AC +/-5V / 35W For RECL8 16675 DP AC +/-5V / 35W For T3232-140/155, T3232-34/45, T6464-34/45 11082 DP AC +5V / 110W For T6464-140/155 (For redundant power, choose FR-PWR-3R-VD) 16675 DP AC +/-5V / 35W For V3232, V6464 16675 DP AC +/-5V / 35W For VD3232 11082 DP AC +5V / 110W For VD6464 (For redundant power, choose FR-PWR-3R-VD) AC DESKTOP POWER FOR CONTROL PANELS 12450 SL-PWR-40 For Sublime Panels 16675 DP AC +/-5V / 35W For IP Panels 11079 DP AC +/-5V / 10W For Compact Panels 2.2 Accessories Y-cable, for redundant power A necessary item to combine two power supplies for redundancy TOOL-KIT RJ45-NCB Connector Matchbox (adapter) between RJ45 and NCB (Network Control Bus), incl. 2 x NCB 0.3 and 2 x RJ45-RJ45-0.3 RJ45-NCB-ADP Connector Matchbox (adapter) between RJ45 and NCB (Network Control Bus) DB25Pin Adaptor Small print-card with DB25 to screw-terminal NCB-bus Cable incl. Connectors NCB-0,3 NCB-1,5 NCB-3,0 NCB-7,5 NCB-15 NCB (Network Control Bus) 0.3 meter cable NCB (Network Control Bus) 1.5 meter cable NCB (Network Control Bus) 3.0 meter cable NCB (Network Control Bus) 7.5 meter cable NCB (Network Control Bus) 15 meter cable NCB-25 NCB-50 NCB-xx NCB (Network Control Bus) 25 meter cable NCB (Network Control Bus) 50 meter cable NCB (Network Control Bus) longer lengths Audio DB25 to XLR 3m x XLRF-25pin 3m x XLRM-25pin Network DB25pin Audio Contact to 8 x XLRF (Female), 3 meter cable Network DB25pin Audio Contact to 8 x XLRF (Male), 3 meter cable AC DESKTOP POWER FOR 1 RU FLASHLINK COMPACT DISTRIBUTION AMPLIFIERS 11084 DP AC +/-15V / 10W For AV0110, A0108DS 11079 DP AC +/-5V / 10W For AD0108Q, V0106Q, V0106DEQ, SDI0106Q AC DESKTOP POWER FOR N-BOX 11084 DP AC +/-15V / 10W For N-BOX (or use SL-PWR-40!) DC DESKTOP POWER FOR VIKINX COMPACT 11081 DP DC +/-15V / 30W For A3232, A6464 Mono A6464 (1 router requires 2 units. Must be ordered separately) 11080 DP DC +/-5V / 30W For AD3232-75, AD3232-110, AD6464-75, AD6464-110 11081 DP DC +/-15V / 30W For CAV0804, CAV0808, CAV1608, CAV1616, incl. Variants 11080 DP DC +/-5V / 30W For D3232 11080 DP DC +/-5V / 30W For RECL8 11080 DP DC +/-5V / 30W For T3232-140/155, T3232-34/45, T6464-34/45 11080 DP DC +/-5V / 30W For V3232, V6464 (For redundant power, choose FR-PWR-2R-V) 11080 DP DC +/-5V / 30W For VD3232 DC DESKTOP POWER FOR CONTROL PANELS 11081 DP DC +/-15V / 30W For Sublime Panels 11080 DP DC +/-5V / 30W For IP Panels 11080 DP DC +/-5V / 30W For Compact Panels DC DESKTOP POWER FOR 1 RU FLASHLINK COMPACT DISTRIBUTION AMPLIFIERS 11081 DP DC +/-15V / 30W For AV0110, A0108DS 11080 DP DC +/-5V / 30W For AD0108Q, V0106Q, V0106DEQ, SDI0106Q DC DESKTOP POWER FOR N-BOX 11081 DP DC +/-15V / 30W For N-BOX network-electronics.com | 215 NETCARE SERVICES 2.3 NetCare NetCare is the name of the technical support activities offered by Network Electronics, for services on the purchased products. NetCare covers: • Commissioning and Configuration Assistance • Service and Support • Product training Note: Network Electronics offers • 3-year standard warranty on hardware products from Network Electronics • 2-year standard warranty on the software products from Network Electronics For “General Conditions for Sales” and “Limited Warranty” visit www.network-electronics.com All details in this catalog are given information and shall not form part of any contract. All technical information is subject to be changed without notice. 216 | network-electronics.com The Global Video Transport Leader Video Products Group, Inc. 1600 Emerson Avenue, Oxnard, CA 93033, USA Tel: +1 (805) 247-8560 Fax: +1 (805) 247-8561 network-electronics.com • vpginc.com Graphic design: Charlotte.no • Print: BK grafisk, Sandefjord/Norway Network Electronics AS P.O. Box 1020, 3204 Sandefjord, Norway Tel: +47 33 48 99 99 Fax: +47 33 48 99 98