Product Catalogue

Transcript

2017 PRODUCT CATALOGUE RENSSI® TOOLS 2017 CHAIN KNOCKERS BRUSHES CUTTERS CENTERING AXELS SANPAPERHOLDERS ADAPTERS & ACCESSORIES PRESS ADJUSTABLE CLUTCH INVERSION DRUMS DRUM HEADS RENSSI® MACHINE CABLES CABLE BALLBEARINGS PRODUCT CATEGORIES How to Buy Chain Knockers 4-5 Chain Knockers 6-9 How to Buy Brushes 10-11 Brushes 12-13 Cutters 14-15 Centering Axels 16-17 Cable Connectors 16-17 Sandpaper Holders & Sandpapers Overshot Pipe Cutter How to Buy Adapters & Accessories 18 19 20-21 Adapters & Accessories 22-23 How to Buy Equipment 24-25 Press 26 Adjustable Clutch 27 Inversion Drums 28-29 Drum Heads 30-31 Renssi® Machine 32-33 How to Buy Cables 34-35 Cables 36-37 Cable Covers & Rotating Cables 38 Cable Ballbearings 39 Metric Allen Key Set 39 4 How to Buy Chain Knockers Renssi ® is a revolutionary, mechanically rotated tool for sewer cleaning and pipeline renovations. Depending on the size of the tool, it has one to three chains with solid carbide inserts brazed on the chainlinks. Because of the inserts, which make the tool so special, the pipe is cleaned out of rust and dirt very effectively. There are two different types of connections to the rotating wire. The wire can be put through the tool and tightened using allen screws or it can be connected using t-slot connectors. RS-(16)-10 Tool's identification (Diameter Ø) Cable size Ø Every tool has it’s own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Chain knockers are found under codes RS, RS-T and RSM. ONLY included in RS-T series! Defines the adapter diameter for RS-T series. 1 = 8mm 2 = 10mm 3 = 12mm 5 50-(/2)-DR Pipe size Ø Features of Chains Information of Tool Tools are designed to match the pipe size. Right size chain knocker cleans the pipe gently without harming the surfaces of the pipe. Chain knockers has usually three chains but we have also few models with two chains and even with one chain. They are marked up with /2 or -1–codes. 4T stands for 4mm chain and tips. DR stands for drill head feature. You can open up for example a lateral connection with it. 6 CHAIN KN TOOLS FOR CABLES RS-1125 RS-2200 RS 1000 SERIES 8mm cable connection Product code Pipe Ø (mm) RS-1050/2 35-50 mm RS-1050 35-50 mm RS-1075/2 50-75 mm RS-1075 50-75 mm RS-1100 75-100 mm RS-1125 100-125 mm RS-1150 125-150 mm RS-1200 150-200 mm RS 2000 SERIES 10mm cable connection RS-3125 REGULAR HEAD Product code Pipe Ø (mm) RS-2050/2 35-50 mm RS-2050 35-50 mm RS-2075/2 50-75 mm RS-2075 50-75 mm RS-2100 75-100 mm RS-2125 100-125 mm RS-2150 125-150 mm RS-2200 150-200 mm RS 3000 SERIES 12mm cable connection Product code Pipe Ø (mm) RS-3050/2 35-50 mm RS-3050 35-50 mm RS-3075 50-75 mm RS-3100 75-100 mm RS-3125 100-125 mm RS-3150 125-150 mm RS-3200 150-200 mm 7 NOCKERS DRILL HEAD TOOLS FOR CABLES RS 1000 SERIES 8mm cable connection Product code Pipe Ø (mm) RS-1050/2-DR 35-50 mm RS-1050-DR 35-50 mm RS-1075-DR 50-75 mm RS-1100-DR 75-100 mm RS-1125-DR 100-125 mm RS-1150-DR 125-150 mm RS-1200-DR 150-200 mm RS-1100-DR RS-2150-DR RS 2000 SERIES 10mm cable connection Product code Pipe Ø (mm) RS-2050/2-DR 35-50 mm RS-2050-DR 35-50 mm RS-2075-DR 50-75 mm RS-2100-DR 75-100 mm RS-2125-DR 100-125 mm RS-2150-DR 125-150 mm RS-2200-DR 150-200 mm RS 3000 SERIES 12mm cable connection Product code Pipe Ø (mm) RS-3050-DR 35-50 mm RS-3075-DR 50-75 mm RS-3100-DR 75-100 mm RS-3125-DR 100-125 mm RS-3150-DR 125-150 mm RS-3200-DR 150-200 mm RS-3150-DR DRILL HEAD 8 MINI RENSSI TOOLS RSM SERIES Product code Pipe Ø (mm) RSM-1035-1 35 mm RSM-1035-2 35 mm RSM-1050-1 35-50 mm RSM-1050-2 35-50 mm RSM-2030-1 30 mm RSM-2030-2 30 mm RSM-2050-2 35-50 mm T-SLIDE SERIES RS-T 16 SERIES T-slide connectors Product code Pipe Ø (mm) RS-T-16-50 50 mm RS-T-16-75 50-75 mm RS-T-16-100 75-100 mm RS-T-16-125 100-125 mm RS-T-16-150 125-150 mm RS-T-16-200 150-200 mm RS-T 20 SERIES T-slide connectors Product code Pipe Ø (mm) RS-T-20-75 50-75 mm RS-T-20-100 75-100 mm RS-T-20-125 100-125 mm RS-T-20-150 125-150 mm RS-T-20-200 150-200 mm RSM-1035-1 9 TOOLS FOR CABLES WITH 4mm CHAIN & TIPS RS 2000-4T SERIES 10mm cable connection RSM-1050-2 Product code Pipe Ø (mm) RS-2100-4T 75-100 mm RS-2125-4T 100-125 mm RS-2150-4T 125-150 mm RS-2200-4T 150-200 mm RS 3000-4T SERIES 12mm cable connection RS-2150-4T Product code Pipe Ø (mm) RS-3100-4T 75-100 mm RS-3125-4T 100-125 mm RS-3150-4T 125-150 mm RS-3200-4T 150-200 mm T-SLIDE SERIES WITH 4mm CHAIN & TIPS RS-T 16 SERIES T-slide connectors Product code Pipe Ø (mm) RS-T-16-100-4T 75-100 mm RS-T-16-150-4T 125-150 mm RS-T-16-200-4T 150-200 mm RS-T 20 SERIES T-slide connectors RS-T-20-125 Product code Pipe Ø (mm) RS-T-20-100-4T 75-100 mm RS-T-20-150-4T 125-150 mm RS-T-20-200-4T 150-200 mm 10 How to Buy Brushes Brushes have quite many different ways of use. Brushes are good for example to clean plastic pipes, where the use of the chain knocker is too heavy. Brushes are also suitable for spreading the paste in the spraylining method and also to center different kinds of tools in the pipe, like drills etc. High-quality strings are made of nylon. We have also NYLON/STEEL brushes which are especially designed for cleaning plastic pipes. RH-1050 Tool's identification Cable size Ø Brush’s Diameter Ø Every tool has its own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RP-T, RID, DH, CLT, TC, RC and RCC. Brushes are found under code RH. 0 = 6mm 1 = 8mm 2 = 10mm 3 = 12mm Tools are designed to match the pipe size. Right size brush cleans the pipe gently without harming the surfaces of the plastic pipe. 11 0 - 40-07 Information of the Tool Length of the Hub Defines the length of the hub in millimeters. This defines the thickness of the nylon string. 07 stands for 0,7 mm string etc. You can choose from 0,3 - 0,5- 0,7 - 0,9 (mm). NS stands for NYLON/STEEL brush which is designed for a bit heavier cleaning and also for grinding the surface of the plastic pipe before spraylining. NS brushes are only available with one size strings. We can also make a custom brush regarding to customer’s needs. 12 BRUSHES BRUSH STOCKLIST NYLON BRUSHES Center hole of the hub 8mm Product code Diameter Ø Hub length RH-1040-14-03 Ø 40 mm 14 mm RH-1045-14-03 Ø 45 mm 14 mm RH-1050-14-03 Ø 50 mm 14 mm RH-1050-20-03 Ø 50 mm 20 mm RH-1075-20-05 Ø 75 mm 20 mm RH-1075-20-07 Ø 75 mm 20 mm RH-1100-20-05 Ø 100 mm 20 mm RH-1100-20-07 Ø 100 mm 20 mm RH-1125-29-05 Ø 125 mm 29 mm RH-1125-29-07 Ø 125 mm 29 mm RH-1150-29-05 Ø 150 mm 29 mm RH-1150-29-07 Ø 150 mm 29 mm RH-1160-40-07 Ø 160 mm 40 mm RH-1175-29-05 Ø 175 mm 29 mm RH-1175-40-07 Ø 175 mm 40 mm RH-1200-40-07 Ø 200 mm 40 mm NYLON/STEEL BRUSHES Center hole of the hub of 8mm Product code Diameter Ø Hub length RH-1075-24-NS Ø 75 mm 24 mm RH-1105-24-NS Ø 105 mm 24 mm RH-1130-24-NS Ø 130 mm 24 mm RH-1155-29-NS Ø 155 mm 29 mm RH-1175-29-NS Ø 175 mm 29 mm RH-1205-29-NS Ø 205 mm 29 mm INFO If you are seeking A CUSTOM BRUSH designed to your needs, you can order them from us. Our minimum custom brush order is 10 brushes. 13 SECURING RING for Brushes The securing ring is used to prevent a drop of the brush from the cable during the cleaning. Product code Product SR-20-006 for 6mm cable SR-20-008 for 8mm cable SR-20-010 for 10mm cable SR-20-012 for 12mm cable 14 ® RLC-150 RLC-075 RLC-100 CUTTERS CUTTERS for Branch connections Product code Diameter Ø Cable size Ø RLC-050 50mm for 50mm pipe RLC-075 75mm for 75mm pipe RLC-100 100mm for 100mm pipe RLC-150 150mm for 150mm pipe 15 CABLE TIP DRILL Product code Cable size Ø RD-008 for 8mm cable RD-010 for 10mm cable RD-012 for 12mm cable RD-008 CUTTER INFO Cutters are used in different operations of relining process. For example RLC-100 is used to open the lateral connection in 100 mm pipe. RLC-050 RLC-075 COLLAPSE LINE DRILL Product code Information RCD-050 Ø 50mm, 5 inserts RCD-100 Ø 100mm, 5 inserts RCD-I-050 50mm - 5 inserts and screws RCD-I-100 100mm - 5 inserts and screws Includes sleeves for 8mm, 10mm and 12mm cables. RCD-100 16 CENTERING AXELS Product code Cable size Ø RCA-050 for 50mm pipe RCA-075 for 75mm pipe RCA-100 for 100mm pipe RCA-150 for 150mm pipe INFO Centering Axels are used to centralize different Renssi® Tools to get the best result for your job. Suitable tools are for example RCD and RLC tools. Centering Axel has high quality ballbearings inside to make it rotate well. CUTTER ASSEMBLY ROC-100 + RCA-050 + CC-050 RCA-150 CABLE CONNECTORS Product code Information CC-050 for 50mm centering axel /Ø 14mm CC-100 for 100mm centering axel/Ø 14mm CC-150 for 150mm centering axel/Ø 14mm CC-008 for 8 mm cable CC-010 for 10 mm cable CC-012 for 12mm cable CC-014-010 for 10mm cable to connect centering axel CC-014-012 for 12mm cable to connect centering axel INFO Cable connectors can connect centering axel or another cable to your cable. 17 RCA-050 CC-050 RCA-075 CC-100 CC-008 CC-010 CC-012 CC-150 18 SANDPAPER HOLDER SANDPAPER HOLDERS Product code Product size Ø RSP-20-55 55mm wide, 4 papers, Ø 20mm RSP-40-110 110 mm wide, 4 papers, Ø 40mm* * Includes sleeves for 8mm, 10mm and 12mm cables. SANDPAPERS Product code Product size SPB-2-3 50mm width x 75mm length SPB-2-4 50mm width x 100mm length SPB-2-6 50mm width x 150mm length SPB-4-4 100mm width x 100mm length SPB-4-6 100mm width x 150mm length RSP-40-110 and RSP-20-55 INFO If you overshoot a liner in 4” pipe, you can easily cut off the excess liner with our Overshot Pipe Cutter. INFO 19 RSP is a sandpaper grinder, with four sandpapers attached to it’s body. After cutting a lateral, you can finish the job with­ it. Use this with different size sandpapers, to match the pipe you are working with. OVERSHOT PIPE CUTTER Product code Product size Ø ROC-100 for 100mm pipe 20 How to Buy Adapters In this category you can find adapters to connect Renssi® Tools with your gear. There are also available many kinds of other accessories which you can use with your Renssi® Tools. With the definition code, you can easily define what kind of and which size adapter you need. RA-16-00 Connector series size Ø Adapter from Defines the diameter of the adapter. 001 002 003 006 008 010 011 012 P08 P10 P12 P16 033 060 065 070 071 Tool's identification Every tool has its own code which is used when ordering. Renssi has codes RS, RS-T, RSM, RH, RD, RA, SR, RT, RP, RPT, RID, DH, CLT, TC, RC and RCC. Adapters and accessories are found under code RA and SR. T-slide female T-slide male Endbit of cable 6mm hole 8mm hole 10mm hole Rotator shaft 12mm hole 8mm pom shaft 10mm pom shaft 12mm pom shaft 16mm pom shaft M14 thread male Shackle, stainless steel M10 thread female G¼ thread male G¼ thread female 21 1-008-IX Adapter to Information of Tool 001 002 003 006 008 010 011 012 P08 P10 P12 P16 033 060 065 070 071 IX means that the adapter is fully made of stainless steel. This feature makes it extra strong. T-slide female T-slide male Endbit of cable 6mm hole 8mm hole 10mm hole Rotator shaft 12mm hole 8mm pom shaft 10mm pom shaft 12mm pom shaft 16mm pom shaft M14 thread male Shackle, stainless steel M10 thread female G¼ thread male G¼ thread female 22 RA-16-001-060-IX ADAPTERS & AC CONNECTORS 16-20-24mm RA-20-001-/16-002 Product code Product RA-16-001-008 T-slide, female, 8mm cable RA-16-001-010 T-slide, female, 10mm cable RA-16-002-008 T-slide, male, 8mm cable RA-16-002-010 T-slide, male, 10mm cable RA-16-008-021 8mm cable, ½" UNF thread male RA-20-001-010 T-slide, female, 10mm cable RA-20-001-012 T-slide, female, 12mm cable RA-20-002-010 T-slide, male, 10mm cable RA-20-002-012 T-slide, male, 12mm cable RA-20-001/16-002 T-slide from 16mm to 20mm RA-24-033-011 M14 thread male, rotator shaft ROTATOR SHAFTS RA-16-002-008 Product code Product RA-16-002-011 T-slide, male, rotator shaft RA-16-008-011 8mm cable, rotator shaft RA-16-010-011 10mm cable, rotator shaft RA-20-002-011 T-slide, male rotator shaft RA-20-012-011 12mm cable, rotator shaft, male ACCESSORIES RA-20-012-011 Product code Product RA-014 T-Slide opener key 4mm RA-015 T-Slide opener key 5mm BRUSH ADAPTERS Product code Product RA-080-010-IX for 10mm cable, Ø 8mm shaft inox RA-080-012-IX for 12mm cable, Ø 8mm shaft inox 23 CESSORIES PUSH RODS Push rods for T-slide with male and female ends. Product code Information RA-010 10mm pom axle, length 1,5m RA-016 16mm pom axle, length 1,5m Push rods are manufactured by customer’s needs. Minimum order is 5 pcs. Push rod connectors Information RA-20-001-P16-IX T-slide, female, 16mm pom shaft inox RA-20-002-P16-IX T-slide, male, 16mm pom shaft inox RA-20-070-P08 G¼ male, 8mm pom shaft RA-20-070-P10 G¼ male, 10mm pom shaft RA-20-070-P16 G¼ male, 16mm pom shaft RA-20-071-P10 G¼ female, 10mm pom shaft RA-16-001-060-M4-IX T-slide, female, shackle M4 aisi 316 RA-16-001-060-M5-IX T-slide, female, shackle M5 aisi 316 RA-20-001-060-M6-IX T-slide, female, shackle M6 aisi 316 Middle bars Information PP-VT-500-8 length 500mm, Ø 8mm PP-VT-500-10 length 500mm, Ø 10mm PP-VT-720-8 length 720mm, Ø 8mm PP-VT-720-10 length 720mm, Ø 10mm Packer heads Information PP-D30-AL packer head Ø 30mm, aluminium PP-D40-AL packer head Ø 40mm, aluminium PP-D60-AL packer head Ø 60mm, aluminium APC-1/4 air pressure connector, accessory APP-1/4 air pressure plug G¼, accessory Packers Information PP-D30-720-08 assembly, Ø30mm, length 720mm, 8mm PP-D40-720-10 assembly, Ø40mm, length 720mm, 10mm PP-D60-720-10 assembly, Ø60mm, length 720mm, 10mm RA-016 RA-20-070-P08 PP-D40-720-10 24 How to Buy Equipment Renssi® Equipment includes all tools you’ll need for relining pipes. We have presses, inversion drums, a machine and a clutch. There are multiple sizes of inversion drum and press models which make them suitable for various types and sizes of pipes. Smaller models, Renssi® Machine and the clutch are designed to use for cleaning and relining pipelines of an appartment. Large models can be used for relining larger complexes of many appartments. Drum heads help you to use right size liner for the pipe. All products are made of quality materials and we are constantly developing each model to be more efficient and accurate for your convenience. cleaning plastic pipes. RP CLT R Tool's identification Every tool has it’s own code which is used when ordering. Equipment are found under codes RP, CLT, RID and RCM. Accessories for the equipment are found under codeC CAT, CRS, RID and DH. 25 RID RCM CAT CRS DH Accessories of the Equipment Accessories of the equipment are sold separately. Accessories’ main goal is to make working with tool more efficient. Clutch spare parts and drum heads of inversion drums ease the use and give multiple choices to working. 26 RP-325 PRESS RENSSI® PRESS Product code Information RP-325 325 mm wide, up to Ø 200mm liner RP-475 475 mm wide, up to Ø 300mm liner If you need a metric steel measure, you can order it separately. INFO Epoxy spreads smoothly on the liner with Renssi® Press. Smoothly spread epoxy on the surfaces of the liner ables successful relining, which repairs pipe’s surface damages and protects the pipe being damaged for a long time. 27 ADJUSTABLE CLUTCH ADJUSTABLE CLUTCH and Spare parts Product code Information CLT-001 Clutch for a drill INFO The clutch is used as an accessory for a drill when rotating a cable with a chain knocker on it. The clutch prevents the cable of breaking down and also personal injuries, if the tool gets stuck in the pipe while rotating. Includes sleeves for 8mm, 10mm and 12mm cables. Includes also clutch keys and a clutch rotator sleeve. The drill is sold separately. Spare parts CLT-25-002-S T-slide 16mm adapter, male CLT-25-006-S Adapter for 6mm cable CLT-25-014 Adapter for 14mm cable* CAT-44 Clutch adjusting tool CAT-001 Hexagonal clutch adjusting tool CAT-set CAT-44 + CAT-001 set CRS-011 Clutch rotator sleeve * Includes sleeves for 8mm, 10mm and 12mm cables. CLT-001 CAT-set CRS-011 28 INVERSION DR INFO Inversion Drums are used in the pipe ­relining. Pneumatic features of the inversion drum shoot the liner smoothly into a pipe which is important in achieving a successful result. RID-400 RID-400 INFO Inversion Drum Model RID-400 is a hybrid, which means that you can attach this model into an accesory bracket RID-400-BR by removing it from its cart. This ability is not available in other models. 29 RUMS RID-400 + RID-400-BR RID-800 INVERSION DRUMS Product code Information RID-200 Ø 200 mm RID-300 Ø 300 mm Accessory Information RID-400 Ø 400 mm RID-400-BR bracket to RID-400 RID-600 Ø 600 mm RID-800 Ø 800 mm RID-400-BR ATTACHMENT 30 DRUM HEADS DRUM HEADS with 4” thread attachment Product code Information DH-4S-50 for Ø 50mm liner DH-4S-70 for Ø 70mm liner DH-4S-100 for Ø 100mm liner DH-4S DH-6S + DH-6S-100 DRUM HEADS with 6” thread attachment Product code Information DH-6S-50 for Ø 50mm liner DH-6S-70 for Ø 70mm liner DH-6S-100 for Ø 100mm liner DH-6S-150 for Ø 150mm liner DRUM HEAD Storz adapters Product code Information DH-4S 4” Storz adapter / thread DH-6S 6” Storz adapter / thread This product is not available in our stock. We will start production after receiving the order. CUSTOM DRUM HEADS Custom drum heads can be manufactured by customer’s needs. Minimum order is 15 pcs. DH-4S COLLECTION 31 DH-6S INFO Drum Head is an accessory of the inversion drum. It ables a versatile use of drums in relining. DH-6Z/R2-150 DRUMHEAD ATTACHED 32 RENSSI MACHIN RENSSI® MACHINE Product code Information RCM-10 cleaning unit with 10m of Ø 10mm cable RCM-20 RCM-35 INFO RENSSI® Machine comes with Bosch 21-2-RCT drill, Renssi CLT-001 clutch and 10 meters of 10mm cable. You can connect Renssi® chainscrapers, brushes and cutters to this machine, depending on your current job. 33 NE RCM-10 34 How to Buy Cables There are two types of cables that we are offering to our customer; Cross Layer and Spring Layer cable. There are a few differences between cables and you are welcome to ask more about their features from us. You have an option to choose ready-to-use TC- and TS-­ cables, which includes a cover, cable and T-slide adapters and/or a sleeve, or you can also ­order cables and covers separately. All you need to know is the length and diameter of the cable and you are ready to choose the cable of your needs. TC-2001,5 Tool’s identification Cable size Ø Cable length (m) Every tool has it’s own code which is used when ordering. Cables are found under codes TC, TS, RC and RCC. Cable accessories are found under code CCB. TC is a ready-to-use cable with a ballbearing and female/male t-slide ends. 1 / 008 = 8mm 2 / 010 = 10mm 3 / 012 = 12mm Cable’s length is determinated after its size value. 001,5 = 1,5 m 004 = 4mm 005 = 5mm 006 = 6mm 35 TS-2001,5 Tool’s identification Cable size Ø Cable length (m) Every tool has it’s own code which is used when ordering. Cables are found under codes TC, TS, RC and RCC. Cable accessories are found under code CCB. TS is a ready to use cable with a ballbearing and a sleeve head. 1 / 008 = 8mm 2 / 010 = 10mm 3 / 012 = 12mm Cable’s length is determinated after its size value. 001,5 = 1,5 m 004 = 4mm 005 = 5mm 006 = 6mm 36 TC CABLES We sell ready-to-use T-cables and cables and covers separately for customer's needs. TC-cables includes a cover, a cable, a ballbearing and T-slide adapters. We use Cross Layer Cable in TC Cables. TC 1000 SERIES 8mm cable / adapters 16mm Product code Length (m) TC-1001 1m TC-1002 2m TC-1003 3m TC-1005 5m TC-1006 6m TC-1008 8m TC-1010 10 m TC-1015 15 m TC-1020 20 m T-SLIDE ADAPTERS AND A BALLBEARING INCLUDED IN TC CABLES TC 2000 SERIES TC 3000 SERIES 10mm cable / adapters 16mm 12mm cable / adapters 20mm Product code Product code Length (m) Length (m) TC-2001 1m TC-3001 1m TC-2002 2m TC-3002 2m TC-2003 3m TC-3003 3m TC-2005 5m TC-3005 5m TC-2006 6m TC-3006 6m TC-2008 8m TC-3008 8m TC-2010 10 m TC-3010 10 m TC-2015 15 m TC-3015 15 m TC-2020 20 m TC-3020 20 m 37 TS CABLES We sell ready-to-use T-cables and cables and covers separately for customer's needs. TS-cables includes a cover, a cable, a ballbearing and a steel sleeve. We use Cross Layer Cable in TS Cables. TS 1000 SERIES 8mm cable Product code Length (m) TS-1001 1m TS-1002 2m TS-1003 3m TS-1005 5m TS-1006 6m TS-1008 8m TS-1010 10 m TS-1015 15 m TS-1020 20 m A BALLBEARING AND A STEEL SLEEVE INCLUDED IN TS CABLES TS 2000 SERIES TS 3000 SERIES 10mm cable 12mm cable Product code Length (m) Product code Length (m) TS-2001 1m TS-3001 1m TS-2002 2m TS-3002 2m TS-2003 3m TS-3003 3m TS-2005 5m TS-3005 5m TS-2006 6m TS-3006 6m TS-2008 8m TS-3008 8m TS-2010 10 m TS-3010 10 m TS-2015 15 m TS-3015 15 m TS-2020 20 m TS-3020 20 m 38 2. INFO CABLES FOR EFFECTIVE USE: 1. Cross Layer Cable 2. Spring Layer Cable 1. COVERS ROTATING CABLES Product code Information Product code RCC-06/08-N for 4mm cable RC-004-1 Ø 4mm RCC-08/10-N for 6mm cable RC-006-1 Ø 6mm RCC-10/12,5-N for 8mm cable RC-008-1 Ø 8mm RCC-12,5/15-N for 10mm cable RC-008-2 Ø 8mm RCC -13,5/16-N for 12mm cable RC-010-1 Ø 10mm RC-010-2 Ø 10mm RC-012-1 Ø 12mm RC-012-2 Ø 12mm CABLE Diameter Ø 39 CABLE COVER BALLBEARINGS Product code Product size CB-D8 8mm cable / 12mm cover CB-D10 10mm cable / 15mm cover CB-D12 12mm cable / 16mm cover CBP-D12 12mm cable / 20mm cover CBT-20 tool for CB-D8/ -D10/ -D12 CBT-24 tool for CBP-12 BALLBEARING KEYS CBT-20 and CBT-24 BALLBEARINGS METRIC ALLEN KEYS Metric Allen Keys for Renssi® Tools. Includes 2.0, 2.5, 3.0, 4.0 , 5.0, 6.0 allen keys. Product code Product code RAK-set six metric allen keys set METRIC ALLEN KEYS 40 ARE YOU READY TO BUY RENSSI TOOLS? CONTACT Renssi Finland Oy addr. Lautamiehenkatu 1, 20780 Kaarina FINLAND e-mail. [email protected] www.renssi.com Prices EXW our stock. All rights reserved. Printed out on January 2017